Kullanılmış Müller-Mitteltal 11,9 To Tand. 3-Seitenkp./ Kombiklappe/ Rampen satın al (54.599)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL3- Achs 30 to. Tieflader verz. hydr. Rampe NEU
Ara
Durum: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0
----Brakes:
* EBS braking system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* Parabolic springs with mechanical axle compensation at rear
Hsdpfxsl Th I Ae Ahhsp
----Drawbar:
* Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle
----Lighting / Electrical:
* RDÜ Tire pressure monitoring system
* Multi-voltage electrical system
* LED tail lights 12 / 24 V
* Removable rotating beacon at rear
* 15-pin power connector
----General Attachments:
* Side underride protection
* Swivel supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages front and rear
* Stainless steel front mudguards (enclosed), as well as straight galvanized steel skirts at rear, each with splash protection
* Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm
* Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform
* Four stake pockets per side (stakes not included) with integrated lashing option
----Load Securing (La-Si-Package consisting of):
* 2 lashing rings (6.4 t) front left and right on the main frame of the turntable platform
* 6 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame
* In corners 13.4 t, otherwise 10 t
----Widening:
* 6 pairs of mechanical folding extensions for 3 m total width (excluding rear taper)
* Widening planks stowed in center of cargo area
----Ramps:
* Hot-dip galvanized, single-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically width-adjustable
* 4-way valve block for retrofit of hydraulic lateral ramp shifting
----Cargo Area:
* Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm approach slope)
----Tyres:
* 235/75 R 17.5 twin tires
----Unladen Weight:
* Approx. 5,980 kg unladen weight
----Paintwork:
* Chassis, turntable, drawbar, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted black
----Information:
* Permissible total weight of 30,000 kg technically possible
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery Time:
Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Agra vorbereitung
Ara
Durum: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline
----Braking System:
* Wabco EBS
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Flange Eye:
* Height-adjustable drawbar (up to 300 mm), with 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ Tire Pressure Monitoring System
* Multivoltage
* 15-pin power connector
* 12V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED rear lights
----General Attachments:
* Manual landing gear at the front
* Two mechanical folding supports at the rear
* Plastic toolbox, right-hand side
* Two-step entry at the front left (in direction of travel)
* Bolted underrun protection
* Plastic quarter mudguards
----Tipper Platform:
* Mesh hooks on sides and rear at the central locking mounts, plus two on the front bulkhead
* Steel platform superstructure, 3-way tipper (continuous side walls, without center stanchions, drop-down with tailgate spring assist, tailboard foldable and swinging via manual central locking)
* 4 mm steel bed
* Rear ramp mounting rail
----Load Securing:
* One lashing point (5 t) in each corner
* Four lashing rings (3 t each) recessed on each side into the outer frame
----Ramps:
* One pair of aluminum approach ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment for ramps recessed under the loading area in the chassis
----Tyres:
* Tyres 385/55 R 19.5
----Paintwork:
* Chassis, drawbar, tipper body, bulkhead, folding supports, and rear stanchions hot-dip galvanized
* Axles, springs, air tank, flange eye and landing gear painted in black
* Side panels painted in a RAL color of your choice (no special or metallic finishes); color can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced body with EN 12642 XL load securing certificate
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Sample images
----Delivery Time:
* Available from approx. calendar week 28 / 2026
Hsdpfjq Euagjx Ahhjp
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Agra vorbereitung
Ara
Durum: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline
----Braking System:
* Wabco EBS
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalisation unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar (adjustable by 300 mm) with 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* Multivoltage
* 15-pin power connector
* 12 V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED rear lights
----General Attachments:
* Mechanical landing gear at the front
Hjdpfjl Thw Isx Ahhjp
* Two mechanical folding supports at the rear
* Plastic toolbox on the right side
* Two-step entry step at the front left (in driving direction)
* Bolted underrun protection
* Plastic quarter mudguards
----Tipper Body:
* Net hooks on the sides and rear in the central locking bearing, plus 2 on the front wall
* Steel pallet-3-way tipping body (continuous side walls, without centre stanchions, foldable with board wall spring assist, tailgate foldable and swinging via manual central locking)
* 4 mm steel floor
* Mounting rail at the rear for loading ramps
----Load Securing:
* 1 x 5 t lashing ring in each corner
* 4 x 3 t lashing rings recessed into the outer frame on each side
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment under the loading platform, recessed into the chassis at the rear
----Tyres:
* Tyres 385/55 R 19.5
----Paintwork:
* Chassis, drawbar, tipping body, front wall, folding supports and rear stanchions hot-dip galvanised
* Axles, springs, air tanks, flange towing eye and landing gear painted black
* Side walls painted in a custom RAL colour (no special or metallic finishes), can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced body with EN 12642 XL load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Sample images
----Delivery Time:
* Available from approx. week 28 / 2026
Küçük ilan
Wardenburg
2.588 km
Üç yöne devirmeli römork
MÜLLER-MITTELTALTandem-3-Seiten-Kipper KA-TA-R 11,9
Ara
Durum: ikinci el, azami yük ağırlığı: 8.750 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, toplam genişlik: 2.550 mm, Üretim yılı: 2023, Müller Mitteltal KA-TA-R 11.9 Tandem Three-Way Tipper with Many Extras. Gross weight: 11,900 kg. Standard payload approx.: 8,750 kg. Internal dimensions: 5,000 x 2,420 x 500 mm. Tyres: 385/55R19.5. 4-coat single-colour paint. Wheels: silver. Chassis/underrun protection: hot-dip galvanized. Platform with front wall: hot-dip galvanized. Axles/springs/air tank etc.: black. Side and rear walls: RAL 2011 deep orange. Reinforced and certified body according to EN 12642 XL incl. load securing certificate (only in combination with 500 mm high steel drop sides). Rear stakes bolted, hot-dip galvanized, no top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated laterally and at the rear in the central locking mounts of the base side wall, plus 2 units on the front wall. BPW axles instead of GIANT. Tipping platform with fixed front wall, hot-dip galvanized version, with bolted, galvanized rear stakes, no additional coating (not applicable with HARDOX floor). Due to the system, waviness may occur during hot-dip galvanizing, especially with large floor sheets; complaints regarding this are excluded from warranty coverage. Tyres 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, code 08.940, ramp length 3,570 mm required). 1 plastic toolbox, black, lockable, W=750 x H=350 x D=300 mm (45 kg capacity with even load), location: on right side of chassis frame in driving direction. 1 pair ALU loading ramps without wheel track (8 t/pair), 3,570 x 400 x 105 mm, suitable for rubber-tyred and tracked vehicles, 55 kg/unit. Two-step access in front of the front wall, on left in driving direction (hot-dip galvanized). Connection lines extended for agricultural and forestry tractors.
Hjdpfx Ahevy Tvtjhop
Further information:
New: No
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL3- Achs 30 to. Tieflader verz. hydr. Rampe NEU
Ara
Durum: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0
----Brake System:
* EBS braking system
* Emergency release for spring-actuated brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* Parabolic springs with mechanical axle equalization at the rear
----Drawbar:
* Drawbar with 50 mm draw eye and height adjustment via tension spring & turnbuckle
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* Multi-voltage system
* LED tail lights 12 / 24 V
* Removable beacon at the rear
* 15-pin power connector
----General Attachments:
* Side underrun protection
* Swivel supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages front and rear
* Front: enclosed plastic mudguards; rear: straight galvanized steel mud flaps, each with splash guards
* Tool box made of galvanized steel sheet, black powder-coated, approx. 650 x 300 x 600 mm
* Folding lid (hot-dip galvanized) for the toolbox on the turntable platform
* Four stake pockets per side (stakes not included), each with integrated lashing option
----Load securing (La-Si package comprises):
* 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform
* 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions, recessed into the outer frame
* 13.4 t at the corners, otherwise 10 t
----Widening:
Hjdpfx Ahol Th Nnehep
* 6 pairs of mechanical folding outriggers for a total width of 3 m (not at the rear chamfer)
* Widening planks stored in the middle of the loading area
----Ramps:
* Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways
* 4-way valve block for retrofitting hydraulic side ramp displacement
----Loading area:
* Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm entry slope)
----Tyres:
* 235/75 R 17.5 twin tyres
----Unladen weight:
* Approx. 5,980 kg unladen weight
----Paintwork:
* Chassis, turntable, drawbar and ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted in black
----Information:
* Permissible gross weight of 30,000 kg technically possible
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL2 achs Tandem Stahl 3 Seitenkip. mit Kombiklappe
Ara
Durum: ikinci el, azami yük ağırlığı: 10.870 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2025, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2023, Donanım: ABS, KA-TA-R 14.4:
Hjdpel Th Htjfx Ahhsp
----Braking system:
* Wabco ABS
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange towing eye:
* Drawbar adjustable in height by approx. 300 mm, with 40 mm flange towing eye
----Electrics / Lighting:
* 15-pin power connector
* Multi-chamber tail lights
----General attachments:
* JOST mechanical landing gear at front
* Rear: 2 mechanical folding supports
* Plastic toolbox approx. 650 x 350 x 320 mm mounted front right side of the chassis
* Bolt-on underrun protection
* Plastic quarter mudguards
* Net hooks at the central locking locations and 2 on the front wall
----Chassis:
* Chassis made of fine-grain steel
----Tipping body:
* Steel pallet 3-way tipper body with continuous side walls reinforced on top with inner tubing – without central stanchions, foldable with drop side spring assist
* Removable bolted rear stanchions
* Combination steel double-wing rear doors, asymmetrically split, can be pivoted and locked at 270°, not foldable, with additional pendulum frame for automatic tailgate opening when tipping, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic tailgate when tipping backwards with the wing doors open
* 4 mm steel floor plate made of fine-grain steel
* Mounting rail at rear for loading ramps
----Load securing:
* 1 x 5 t lashing ring in each corner and 4 x 3 t recessed lashing eyes per side in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps approx. 3570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred & tracked vehicles
* Lockable storage compartment for ramps integrated underneath cargo area in the chassis, accessible from the rear
----Tyres:
* Tyres 285/70 19.5
----Paintwork:
* Chassis, drawbar, underrun protection, rear stanchion, rear folding supports galvanised
* Axles, springs, air tank and landing gear painted in a shade of black
* Sideboards painted RAL 9010 pure white
* Other RAL colours for the sidewalls available at additional cost
----Information:
* Reinforced body with load securing certificate
* Vehicle has a one-day registration (not in use)
* Subject to prior sale and errors excepted
----Delivery time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL2 achs Tandem Stahl 3 Seitenkip. mit Kombiklappe
Ara
Durum: ikinci el, azami yük ağırlığı: 10.870 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2025, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2023, Donanım: ABS, KA-TA-R 14.4:
----Braking System:
* Wabco ABS
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange Draw Eye:
* Height-adjustable drawbar, approx. 300 mm, with 40 mm flange draw eye
----Electrics / Lighting:
* 15-pin power connector
* Multi-chamber tail lights
----General Attachments:
* Jost mechanical landing leg at the front
* 2 mechanical folding supports at the rear
* Plastic toolbox approx. 650 x 350 x 320 mm, mounted on the right front side of the chassis
* Bolted underrun protection
* Plastic quarter mudguards
* Net hooks positioned at the central locking latches and 2 hooks on the front wall
----Chassis:
* Chassis made from fine grain steel
----Tipping Platform:
* Steel pallet tri-side tipper body with continuous side walls and internal tube reinforcement—without central stanchions, folding with drop side spring assist
* Rear stanchions bolted
* Combination steel swing doors at the rear, asymmetric 2-leaf design—swivels and lockable up to 270°, not foldable—with additional pendulum frame for automatic rear door opening during tipping, locking via galvanized rotary bolt lock and central locking, deactivation function for automatic rear door when tipping backwards with swing door open
* 4 mm fine-grain steel floor plate
* Rear ramp holder rails
----Load Securing:
* One 5 t lash ring in each corner, plus four 3 t lashing eyes per side recessed in the outer frame
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment integrated under the platform at the rear of the chassis for the ramps
----Tyres:
* Tyres: 285/70 R19.5
----Coating:
* Chassis, drawbar, underrun protection, rear stanchions, and rear folding supports hot-dip galvanized
* Axles, springs, air tanks, and landing leg painted in a black shade
* Sideboard coating in RAL 9010 pure white
* Side wall coating in other RAL colors available at extra cost
----Information:
* Reinforced body with load securing certificate
* Vehicle has a day registration (unused)
* Subject to prior sale and errors excepted
Hodol Th Duepfx Ahhop
----Delivery Time:
Immediately available ex Egestorf
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL19 to luftgef. Tandemtieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, ETÜ-TA-R 19.0
----Braking System:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 11 t Gigant axles
----Suspension:
* Air suspension with manual lowering at the rear
----Drawbar / Flange Drawbar Eye:
* Drawbar with 50 mm flange drawbar eye and height-adjustable drawbar
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* LED tail lights
----General Attachments:
* Jost landing gear at the front
* External folding supports at the rear
* Tool box made of galvanized sheet steel, approx. 650 x 350 x 320 mm, mounted right side, black powder-coated
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Deck:
* Reinforcement package for drilling rig transport on the chassis – loading height + 20 mm
* 50 mm softwood floor in clamped design
* Preparation in front of front wall for retrofitting container locks
* Front wall bolted, made from smooth sheet metal
* Side walls made of profiled steel sheet – drop-down, with spring assistors
* Rear wall, steel, slides between ramps – storage bracket in front of the front wall when not in use
* Bolted rear stakes
----Load Securing:
* Perforated outer frame, approx. 45° angled with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing rings possible every 600 mm
* In each corner at the front and rear: 1 x 10 t lashing ring; various holes in the front and rear cross member for 1.2 t lashing options
Hjdpfjpk D D Hjx Ahhjp
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be pushed together to 20 mm)
* Rear approach slope approx. 860 mm
----Tyres:
* Wheelbase: 1,310 mm
* Tyres: 235/75R17.5
----Paintwork:
* Chassis, drawbar, front wall, tailgate, rear folding supports, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in a shade of black
* Sideboard paintwork in RAL 9010 pure white
* Side wall paintwork in a RAL color of your choice available at extra charge
----Info:
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Available immediately ex Egestorf
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL21 to luftgef. Tandemtieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 21.0:
----Braking System:
* Wabco EBS-E (Electronic Braking System)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 11 t Gigant axles
----Suspension:
* Air suspension with raising and lowering system
----Drawbar / Flange Towing Eye:
* Drawbar with 50 mm flange towing eye and height-adjustable drawbar
----Lighting / Electrics:
* 15-pin electrical connector
* LED lights 12/24 V
* RDÜ tire pressure monitoring system
----General Attachments:
* Jost landing gear at the front
* External folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* Preparation before the front wall and rear slope for retrofitting container locks for transporting 20" containers
* Designed for 21 t GVW with reinforced frame and axles
* Reinforcement package on the chassis for transporting drilling equipment
* 50 mm softwood floor in clamped design
* Front wall provided with preparation for retrofitting container locks
* Bolted front wall made of smooth sheet steel
* Split, fold-down side walls made of trapezoidal-profiled sheet steel with centrally mounted folding stanchion
Hodpel Tihxofx Ahhjp
* Steel rear wall insertable between the ramps – storage bracket for unused panel inside at the front wall
* Rear stanchions bolted
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t retractable lashing rings every 600 mm
* Profifix lashing rail centrally positioned along the longitudinal axis for securing options up to LC 3000 daN
* 1 x 10 t lashing ring at each front and rear corner
* Lashing package with 2 x 8 t flush-mounted lashing rings per side in the outer frame; various holes for 1.2 t lashing options in front and rear cross beams
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (retractable to 20 mm)
* Rear run-up angle approx. 860 mm from chassis
----Loading Heights:
* Unladen approx. 940 mm
* Laden approx. 910 mm
----Wheelbase / Tires:
* 1,810 mm
* Tires: 235/75R17.5
----Painting:
* Painting of the side walls in a RAL color of your choice (no special or metallic paints); can be changed up to approx. 6 weeks before completion
* Drawbar, front wall, tailgate, folding supports, and drive-on ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Sample images shown
----Delivery Time:
* Available from week 29 / 2026
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL19 to. Tandemtieflader mit Auffahrrampe NEU
Ara
Durum: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 19.0:
----Braking System:
* Wabco EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
2 x 10 t BPW Eco axles
----Suspension:
* Parabolic springs - 110 mm wide - with tandem equalizing unit
----Drawbar / Flange Eye:
Drawbar with 50 mm flange eye and height-adjustable drawbar
----Electrics / Lighting:
* 15-pin power connector
* LED rear lights
* RDÜ tire pressure monitoring system
----General Attachments:
* Jost landing gear at front
* Outward folding rear support legs
* Side underrun protection
* Plastic quarter mudguards
----Low-loader Deck:
* 50 mm softwood floor
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted smooth sheet metal bulkhead
* Foldable, trapezoidal-profile steel side walls with drop-side lifting assist
* Slide-in steel rear wall between the ramps (storage bracket at the front when not in use)
* Screw-mounted rear stanchions
----Load Securing:
* Perforated outer frame, angled approx. 45 degrees, with 2 t lashing points every 480 mm
* Option for installation of 3 t folding lashing rings every 600 mm
* 1 x 10 t lashing ring at each front and rear corner; various holes in the front and rear crossmembers for 1.2 t lashing points
* Profifix lashing rail centrally along the longitudinal axis for lashing loads up to LC 3,000 daN
----Ramps:
* One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be retracted to 20 mm)
* Rear ramp approach angle approx. 860 mm
----Painting:
* Chassis, drawbar, bulkhead, rear wall, loading ramps and folding supports hot-dip galvanized
* Side walls painted in RAL 9010 pure white
* Side wall painting in any RAL color available at extra charge
* Axles, springs, air tanks, flange eye and landing gear painted black
----Info:
* New vehicle with full manufacturer's warranty
* Errors and prior sale reserved
Hodpfx Ajl Th Hwjhhop
----Delivery Time:
* Immediately available ex Egestorf on the A7
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
Ara
Durum: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-ER 19.0:
----Braking system:
* Wabco EBS-E (electronic braking system)
* Emergency release for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 11 t Gigant axles
----Suspension:
* Air suspension with lifting and lowering facility
----Drawbar / Flange Drawbar Eye:
* Drawbar with 50 mm flange drawbar eye and 110 mm height adjustment via offset plate
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin power connector
* LED tail lights 12 / 24 Volt
----General Attachments:
* Jost landing leg at front
* External folding supports at rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* Reinforcement package for drilling rig transport on the chassis
* 50 mm softwood floor, clamped design
* Fittings in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth sheet
* Split steel side walls, trapezoidal-profiled, foldable with folding stake in the center
* Steel rear wall, slide-in between ramps (storage bracket for non-use inside in front of bulkhead)
Hsdpfx Asmi Tmashhop
* Rear stakes bolted
----Load securing:
* Perforated outer frame approx. 45 degrees angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashings every 600 mm
* Load securing package: in front and rear corners, each 1 x 10 t UVV-rated lashing point, each side 2 x 8 t UVV-rated lashing rings, retractable in outer frame; various holes for 1.2 t lashing option in front and rear cross members
----Ramps:
* One-piece slide-in ramps, 12 t / pair, approx. 2,750 x 620 mm
* Rear driving slope approx. 860 mm
----Loading height:
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
----Tyres / Wheelbase:
* Wheelbase: 1,810 mm
* Tyres: 235/75R17.5
----Paintwork:
* Chassis, drawbar, bulkhead, rear gate, folding supports, and loading ramps hot-dip galvanized
* ---Axles, air tanks, flange drawbar eye, and landing leg painted in black shade---
* Vehicle is hot-dip galvanized
----Info:
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted / subject to change
----Delivery time:
* Immediately available from Egestorf
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking System:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizer unit
----Drawbar / Flange Tow Eye:
* Drawbar height-adjustable by 300 mm
* Drawbar extension by 250 mm up to 2,250 mm
* 40 mm flange tow eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin power connector
* LED lighting
----General Attachments:
* Landing gear at the front
* Fold-out stabilizer legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside at the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* At the front bulkhead and rear incline, provision for retrofitting container locks for transporting 20'' containers
* Bolted bulkhead made of smooth sheet metal
* Drop-side walls made of trapezoidal steel sheet, central split, folding
* Steel rear wall - insertable between the ramp mounts, can be stowed inside at the front bulkhead when not in use
* Rear stakes bolted
----Load Securing:
* Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm
Hodpov Eq Evjfx Ahhsp
* Option for installation of 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each corner, front and rear
* Various holes in the front and end cross-members for 1.2 t lashing options
* Profifix lashing rail, centrally along longitudinal axis, for securing up to LC 3000 daN
----Ramps:
* One-piece mechanical mesh ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be closed to 20 mm)
* Rear approach angle, approx. 860 mm chassis
----Wheelbase:
* Wheelbase 1,140
----Paintwork:
* Drawbar, bulkhead, rear flap, folding legs, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange tow eye and landing gear painted black
* Side walls painted to RAL color of choice (excluding special or metallic colors), changeable up to approx. 6 weeks before completion
----Information:
* Reinforced and certified body according to EN 12642 XL including load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 30 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release device for spring brake cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange towing eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding support legs at the rear
* Plastic toolbox installed on the right front exterior of the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood flooring
* Prepared fixture in front of the bulkhead for later installation of container locks
* Bolt-on bulkhead made from flat sheet steel
* Drop-down side panels made from trapezoidal steel sheets with sideboard spring assist
* Steel rear panel can be inserted between ramps – storage holder provided inside the bulkhead when not in use
* Rear stanchions bolted
----Load securing:
Hjdpfxjxglibj Ahhsp
* Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashings every 600 mm
* In the corners (front and rear), each fitted with 1 x 6.3 t lashing ring
* Various drill holes in the bulkhead and end cross member for additional lashing points at 1.2 t
----Ramps:
* One-piece mechanical mesh ramps with spring assist for one-person operation, approx. 2,750 x 600 mm (can be retracted to 20 mm thickness)
* Rear approach angle approx. 860 mm
----Painting:
* Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear panel
* Side panel color in RAL 9010 pure white
* Side panel painting in another RAL color available at extra cost
----Information:
* --Reinforced and certified bodywork according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
----Delivery time:
* Available from approx. CW 30/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking system:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
Hodpfxjxglh Ro Ahhep
----Drawbar / Flange drawbar eye:
* Drawbar adjustable in height by approx. 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* 40 mm flange drawbar eye
----Lighting / Electrics:
* TPMS (Tyre Pressure Monitoring System)
* LED lighting
----General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox on the front right outside of the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood floor
* Preparation in front of the front wall for subsequent installation of container locks
* Bolted front wall made of smooth sheet metal
* Drop sides made of trapezoidal sheet steel, foldable with side board spring lifter
* Rear wall made of steel, slidable between the ramps – storage bracket inside front wall when not in use
* Removable rear stanchions (bolted)
----Load securing:
* Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various mounting holes in front crossmember and rear end carrier for 1.2 t lashing points
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be nested up to 20 mm)
* Rear approach slope approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, front wall, ramps, and rear wall
* Platform side wall color in RAL 9010 pure white
* Painting of the side walls in any RAL color available at extra cost
----Info:
* --Reinforced and certified structure according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from approx. week 30/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm, total length 2,250 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin electrical connector
* LED lighting
----General Attachments:
* Support winch at the front
* Fold-out external support legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Preparation for retrofitting container locks in front of bulkhead and rear slope for transporting 20" containers
* Bolted smooth steel bulkhead
* Side walls made of trapezoidal steel sheet, split and foldable once in the center
* Rear wall made of steel, can be slid and stored between the ramp holders when not in use, inside in front of the bulkhead
* Rear stanchions bolted
----Load Securing:
Hsdev D Tcbjpfx Ahhep
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to fit 3 t folding lashing eyes at 600 mm intervals
* In each front and rear corner: one 6.3 t lashing ring
* Multiple holes for 1.2 t lashing options in front and rear crossmember
* Profifix lashing rail along centerline for lashing up to LC 3,000 daN
----Ramps:
* One-piece mechanical grating ramps with spring assist for one-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm thickness)
* Rear approach angle approximately 860 mm on chassis
----Wheelbase:
* Wheelbase 1,140 mm
----Paintwork:
* Drawbar, bulkhead, tailgate, support legs, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and support winch painted in black
* Side walls painted in RAL color of choice (no special or metallic paints), can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced and certified body according to EN 12642 XL, including load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 30 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking System:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with balance mechanism
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, 300 mm range
* Drawbar extension of 250 mm (total length 2,250 mm)
* 40 mm flange towing eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding support legs at the rear
* Plastic toolbox, front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted flat sheet steel bulkhead
* Sidewalls made of trapezoidal-profiled steel, foldable with drop side spring assist
* Steel rear wall, retractable between the ramps – storage bracket on the inside of front bulkhead when not in use
* Rear stakes bolted
----Load Securing:
Hjdpfx Ahoq Dyvvjhsp
* Perforated outer frame, approx. 45-degree angled, with 2 t lashing force every 480 mm
* Option to install 3 t flip lashing rings every 600 mm
* Each front and rear corner with 1 x 6.3 t lashing ring
* Various holes in bulkhead and rear crossmember for additional 1.2 t lashing possibilities
* Profifix lashing rail along the longitudinal axis (center) for lashing loads up to LC 3,000 daN
----Ramps:
* One-piece mechanical grating access ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm overall height)
* Rear approach angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis including drawbar, bulkhead, ramps, and rear wall
* Sidewall color in RAL 9010 pure white
* Painting of sidewalls in a different RAL color available at additional cost
----Information:
* --Reinforced and certified body in accordance with EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from calendar week 29/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL19 to. Tandemtieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 19.0:
----Brake System:
* Wabco EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
2 x 10 t BPW Eco axles
----Suspension:
* Parabolic springs -110 mm wide- with tandem compensation unit
----Drawbar / Flange eye:
Drawbar with 50 mm flange towing eye and height-adjustable drawbar
Hsdel Th Hljpfx Ahhjp
----Electrics / Lighting:
* 15-pin power connector
* LED tail lights
* RDÜ tyre pressure monitoring system
----General Attachments:
* Jost landing gear at the front
* Rear fold-out supports (external)
* Lateral underrun protection
* Quarter plastic mudguards
----Low-loader Platform:
* 50 mm softwood floor
* Preparation in front of the front wall for retrofitting container locks
* Bolted smooth steel front wall
* Side panels made from trapezoidal-profiled steel, foldable with spring-assisted mechanism
* Rear steel wall, retractable between the ramps – holder provided inside in front of the front wall when not in use
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to fit 3 t folding lashing rings every 600 mm
* In the corners at the front and rear: 1 x 10 t lashing ring; various holes in the front and rear crossmembers for 1.2 t lashing points
* Central Profifix lashing rail along the longitudinal axis for lashing up to LC 3000 daN
----Ramps:
* One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be compressed to 20 mm)
* Rear approach angle approx. 860 mm
----Paintwork:
* Chassis, drawbar, front wall, rear wall, drive-on ramps and folding supports hot-dip galvanised
* Drop sides painted in RAL 9010 pure white
* Side panels can be painted in a RAL colour of your choice at extra cost
* Axles, springs, air tanks, flange towing eye and landing gear painted in black
----Information:
* New vehicle with full manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately from Egestorf on the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL19 to luftgef. Tandemtieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, ETÜ-TA-R 19.0
----Brake System:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 11 t Gigant axles
Hsdpfepk D Ncjx Ahhsp
----Suspension:
* Air suspension with manual lowering at the rear
----Drawbar / Flange Towing Eye:
* Drawbar with 50 mm flange towing eye and height-adjustable drawbar
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin electrical connector
* LED tail lights
----General Fittings:
* Jost landing gear at front
* Fold-out stabilizer legs at rear
* Tool box made of galvanized sheet steel approx. 650 x 350 x 320 mm, mounted right side (powder-coated in black)
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* Reinforcement package for drilling rig transport on chassis – loading height + 20 mm
* 50 mm softwood floor in clamped design
* Preparation in front of the front wall for later installation of container locks
* Bolted front wall made of smooth sheet metal
* Side walls made of trapezoidal profile steel sheet, folding down with spring-assisted dropside lift
* Steel rear wall, insertable between ramps – storage bracket inside in front of the front wall when not in use
* Rear stanchions bolted
----Load Securing:
* Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* In the corners at the front and rear, 1 x 10 t lashing ring each; various holes for 1.2 t lashing options in the front and rear cross member
----Ramps:
* One-piece mechanical grating ramps with spring system for single-person operation approx. 2,750 x 620 mm (collapsible to 20 mm)
* Rear approach slope approx. 860 mm
----Tyres:
* Wheelbase: 1,310 mm
* Tyres: 235/75R17.5
----Paintwork:
* Chassis, drawbar, front wall, tailgate, rear stabilizer legs, and ramps hot-dip galvanized
* Axles, springs, air tank, and landing gear painted in a shade of black
* Sideboard panels painted RAL 9010 pure white
* Painting of side walls in other RAL color available for surcharge
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release mechanism for spring-loaded actuators
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalization unit
----Drawbar / Drawbar Eye:
* Height-adjustable drawbar (adjustable by approx. 300 mm)
* Drawbar extension by 250 mm (up to 2,250 mm)
* 40 mm flange-type towing eye
----Lighting / Electrics:
* Tire pressure monitoring system (TPMS)
* LED lighting
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox at the front right, mounted on the outside of the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Deck:
* 50 mm softwood floor
* Provision in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made from smooth sheet metal
* Drop sides made of trapezoidal-profile steel sheet, folding down with sideboard spring assist
* Rear wall made of steel, can be inserted between the ramps (storage bracket for non-use inside in front of the bulkhead)
* Rear stanchions bolted
----Load securing:
Hedpfervvfljx Ahhop
* Perforated outer frame, angled approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Option to install 3 t retractable lashing rings every 600 mm
* One 6.3 t lashing ring front and rear, in each corner
* Various drilled holes in the front and rear crossmember for 1.2 t lashing points
* Profifix lashing rail along the longitudinal axis, centered, for lashing up to LC 3000 daN
----Ramps:
* One-piece mechanical steel grid loading ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm)
* Rear approach angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis including drawbar, bulkhead, loading ramps, and rear wall
* Sideboard color in RAL 9010 pure white
* Painting of side panels in an RAL color tone available at extra cost
----Information:
* Reinforced and certified body according to EN 12642 XL, including load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from approx. calendar week 29/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
Ara
Durum: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-ER 19.0:
----Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 11 t Gigant axles
----Suspension:
Hedsmi Tcqepfx Ahhsp
* Air suspension with lifting and lowering device
----Drawbar / Flange Eye:
* Drawbar with 50 mm flange towing eye and height adjustment by 110 mm via offset plate
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin power connector
* LED tail lights 12 / 24 volt
----General Attachments:
* Jost landing gear at the front
* External folding supports at the rear
* Plastic Toolbox approx. 750 x 350 x 300 mm, right side
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Bed:
* Reinforcement package for drill rig transport on the chassis
* 50 mm softwood floor, clamped version
* Provision in front of bulkhead for subsequent installation of container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of trapezoidal-profiled steel sheet, fold-down with folding stanchion in the center
* Steel rear wall insertable between ramps—bracket for stowing inside in front of bulkhead when not in use
* Screw-mounted rear posts
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing brackets every 600 mm
* Load securing package: Each front and rear corner with 1 x 10 t UVV lashing ring; each side with 2 x 8 t UVV retractable lashing rings integrated into outer frame; various boreholes in front and end crossmembers for 1.2 t lashing points
----Ramps:
* Single-piece sliding ramps, 12 t/pair, approx. 2,750 x 620 mm
* Rear approach angle approx. 860 mm
----Loading Height:
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
----Tyres / Wheelbase:
* Wheelbase: 1,810 mm
* Tyres: 235/75R17.5
----Paintwork:
* Chassis, drawbar, bulkhead, rear flap, folding supports, and access ramps hot-dip galvanized
* ---Axles, air tank, flange towing eye, and landing gear painted in black---
* Vehicle is hot-dip galvanized
----Information:
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.484 km
Roll-off dorse
MÜLLER-MITTELTAL14,4 to. Tand. Cont. Absetzanh. -feuerverzinkt-
Ara
Durum: yeni, azami yük ağırlığı: 12.200 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * TM-TA 14.4:
----Brakes:
* Wabco EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable, hot-dip galvanized drawbar +/- 150 mm
* 40 mm flange drawbar eye
----Electrics / Lighting:
* 15-pin power socket
* LED tail lights
* RDÜ tire pressure monitoring system
----General Attachments:
* Jost landing gear at front
* 2 x external drop-down support legs at rear
* Closed plastic single mudguards
* Foldable A-sign at rear
* Plastic underrun bumper with protection buffers
* Hot-dip galvanized bumper with integrated chain storage box, size: W = 370 mm x D = 420 mm x H = 480 mm, front left & right
----Load Securing:
* Each side with 2 x 5.3 t UVV lashing rings for attaching tensioning devices
----Container Stops:
* 2 removable container stops for lateral centering of containers
* Front container stops with pivotable stops, pluggable in 4 positions
----Paintwork:
* Hot-dip galvanized chassis
* Axles, springs, air reservoirs, and landing gear painted black
----Information:
* Errors and prior sale excepted
* New vehicle with manufacturer's warranty
----Delivery Time:
Hsdpol Thyqjfx Ahhsp
* Available from approximately CW 38/2026
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Egestorf
2.484 km
Roll-off dorse
MÜLLER-MITTELTAL14,4 to. Tand. Cont. Absetzanh. -feuerverzinkt-
Ara
Durum: yeni, azami yük ağırlığı: 12.200 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * TM-TA 14.4:
----Braking system:
* Wabco EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizing unit
----Drawbar / Flange drawbar eye:
* Height-adjustable (±150 mm) hot-dip galvanized drawbar
* 40 mm flange drawbar eye
----Electrics / Lighting:
* 15-pin electrical connector
* LED tail lights
* RDÜ tire pressure monitoring system
----General attachments:
* Jost support winch at the front
* 2 x external drop-down support legs at the rear
* Enclosed single plastic mudguards
* Foldable A-sign at the rear
* Plastic underride guard buffer
* Hot-dip galvanized impact guard with integrated chain storage box (W=370 mm x D=420 mm x H=480 mm), front left and right
----Load securing:
* 2 x 5.3 t UVV lashing rings per side for attaching tensioning elements
* Includes 2 permanently mounted ratchet tensioners with chain boxes on the external frame
Hedpfx Ahspk Dyxjhsp
* Balancing chain on both sides with eye and quick-shortener, special Y-version, 6.3 t
----Skip stops:
* 2 removable skip stops for lateral centering of containers
* Front skip stops with swiveling stop, lockable in 4 positions
----Paintwork:
* Hot-dip galvanized chassis
* Axles, springs, air tanks, and support winch painted in black tone
----Info:
* Certified lashing force with load securing certificate
* Subject to errors and prior sale
* New vehicle with manufacturer's warranty
----Delivery time:
* Available from approx. week 38/2026
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL14,4 to. Plateau, Luft, 3 m. Cont.- Verriegelung
Ara
Durum: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed:
----Brakes:
* EBS (Electronic Braking System)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t BPW axles
----Suspension:
* Air suspension with lifting and lowering device
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B dimension of approx. 8,080 mm)
* 40 mm flange towing eye
----
Electrics / Lighting:
Hodpfxjv D Tbks Ahhsp
* 15-pin connector
* LED lighting system 12/24 V
* 2 additional LED reversing lights at rear (operated via reverse gear)
* 1 removable LED beacon (including holder) at rear
* TPMS (Tire Pressure Monitoring System)
----General Attachments:
* Mechanically adjustable 3 meter warning panel sets at the front and rear
* Support crank at the front
* Rear external folding supports
* Plastic toolboxes approx. 750 x 350 x 300 mm, mounted on left and right sides
* Lateral underrun protection
* Rear underrun guard
* Plastic quarter mudguards
----Loading Area:
* 400 mm high bolted front wall
* 50 mm softwood floor
* 2 pairs of container locks (extendable to 3 m container external width) and lockable, locking dimension retracted per ISO - DIN 15190 = 2,259 mm; container locks extended = 2,819 mm (this dimension is not to DIN) for an absolute external width of 3,000 mm
----Load Securing:
* Perforated outer frame, angled approx. 45 degrees with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing eyes every 600 mm - 5 x 3 t UVV-certified lashing eyes installed on each side -
* At each front and rear corner: 1 x 6.3 t lashing ring (front, directly behind the container locks in the wooden floor, and rear in the end cross member)
* Various holes for 1.2 t lashing points in front and rear cross members
----Ramps:
* 1 pair of aluminium slide-in ramps, approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles
* Storage compartment at the rear, recessed in the chassis under the loading area
----Paintwork:
* ---Chassis, drawbar, front wall, underrun guard, and rear supports hot-dip galvanized---
* Axles, air tanks, front support crank, and flange towing eye painted in black
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from week 39/2026
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL3-Achs Plateau, luftgefedert, hydr. Rampen
Ara
Durum: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile:
----Braking System:
* EBS (Electronic Braking System)
* Emergency manual release for spring-loaded cylinders
* Drum brakes
----Axle:
* 3 x 11 t Gigant axles
----Suspension:
* Air suspension with lift and lower function and return-to-ride (RtR) valve
----Drawbar:
* 1,200 mm drawbar with 40 mm draw eye and height adjustment via spring and turnbuckle
----Electrics / Lighting:
* Smart-Board mounted on trailer as infotool (for axle load display - individually front and rear)
* Tire pressure monitoring with in-truck display via EBS signal – no truck-side installation required
* 15-pin power plug
* LED lighting 12 / 24 V
* Removable rear LED rotating beacon
----General Attachments:
* Side underrun protection
* Swing-away supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages, front and rear
* Front axle (FA) plastic quarter mudguards with splash protection
* Rear axle (RA) straight galvanised steel skirts with splash protection
* Toolbox, galvanised steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side
* Accessories box on turntable with folding lid and 2 fixed container locks (directly after the turntable platform)
* 2 galvanised climbing steps on turntable, left and right
----Low loader platform:
* Robot-welded anti-slip surface on steel plate of turntable platform (exposed weld beads)
----Load Securing (Load-Securing Package includes):
* 2 lashing rings (13.4 t) front left & right on bulkhead cross member
* 1 pair UVV-approved lashing rings (13.4 t) each front and rear, plus 3 pairs UVV lashing rings (10 t) per side, swivelling and lowerable, loadable in all directions, recessed in outer frame
* 3 stake pockets per side, each with simultaneous 2 t lashing option
* Profifix lashing rail along the longitudinal centreline in the flat area for lashing up to LC 3000 daN
----Widening:
Hedpstplwiofx Ahhep
* 6 pairs of mechanical folding out riggers for 3 m total width (not in the rear slope area)
* Widening planks stored in the centre of the loading platform
----Ramps:
* Hydraulic one-piece loading ramps approx. 3,000 x 720 mm
* Mechanically adjustable sideways
* 4-way control block for retrofitting hydraulic ramp repositioning
----Excavator Arm Rest:
* Continuous excavator arm rest over rear axle up to end crossmember (total length approx. 2,100 mm)
* 2 pairs of lashing eyes LC 6,400 daN in the excavator arm rest, fitted laterally in the longitudinal frame
----Loading Height:
* Loaded: approx. 910 mm +/- 20 mm with air suspension
----Paintwork:
* Chassis, turntable, folding out riggers, drop legs and loading ramps hot-dip galvanised
* Axles, slewing ring, air tanks, drawbar painted black
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTALT4 40,0 , Agrar, hydr. Rampen,3 m. Paket
Ara
Durum: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T 4:
* EBS (Electronic Braking System)
* Emergency release for spring brake cylinders
Hodpfx Ahjrczm Dshjp
* Drum brakes
* 4 x 11 t Gigant axles
* Parabolic springs
* Mechanical axle compensation front and rear
* Tire pressure monitoring with in-cab display via EBS signal – no installation required on the truck side
* Front & rear warning panel sets
* Reflective contour tape on sides and rear
* EBS multi-voltage system for 12 & 24 V electrics
* Removable LED beacon at the rear
* 24 V - 15-pin as well as additional 12 V - 7+4 pin power cable
* Extended connection cables for agricultural and forestry tractors
* LED lighting
* Straight drawbar with 40 mm towing eye, height infinitely adjustable
* Tool box made of powder-coated steel sheet and basket-style spare wheel holder on the right
* Front closed plastic mudguards (single), rear straight steel spray aprons each with spray suppression
* Side underrun protection
* 500 mm forward offset extension
* Fifth wheel platform extended to the front by 520 mm with 45° corners and 3 recessed lockable storage compartments with lids
* Chassis made of high-strength fine-grain steel
* Floor over the fifth wheel platform: 50 mm softwood, in the low-loader platform: 60 mm softwood
* Outer boards of loading ramps: 50 mm bamboo wood
* Four stake pockets per side (no stakes included), each also providing a 2 t lashing option
* Load securing package (Lasi package) consisting of: 2 lashing eyes (6.4 t) front left and right on the main frame of the fifth wheel platform; 1 pair of 13.4 t lashing rings front and rear on the outer frame, 4 pairs of 10 t lashing rings per side—swiveling, lowerable, all-directional load, recessed in the frame; 2 pairs of 6.4 t lashing rings on the shovel recess, 8 pairs of galvanized folding extensions for 3 m overall width (not on rear slope)
* Extension planks for widening, stored left side in the storage compartment
* Shovel recess above the rear axles to the end of the approach slope: approx. 2,300 x 740 x 190 mm
* Mechanical drop-down supports at rear
* Hydraulic, hot-dip galvanized loading ramps: approx. 3,000 x 720 mm
* Hydraulic side ramp shift on sliding pipe from the ramp shaft
* Load platform above fifth wheel: approx. 2,990 x 2,520 mm, rear loading platform: approx. 6,280 x 2,520 mm
* Loaded platform height: approx. 860 mm (including 860 mm approach slope)
* Chassis, turntable, loading ramps, rear mechanical folding supports: hot-dip galvanized
* Axles, springs, air tanks, and turntable painted in black
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Immediately available ex Egestorf
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal 11,9 to tand. 3-seitenkp./ kombiklappe/ rampen"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.






































































































































































































































































































































































































































































































