Kullanılmış Müller-Mitteltal 24 To. Kombi Cont. Fl.-Liftachse Neu satın al (38.999)

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders Rjdpfsl Thy Rjx Ahhow * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * Drawbar with 300 mm adjustable height * 40 mm flanged towing eye ----General Attachments: * Jost mechanical landing gear at front * Externally mounted, hot-dip galvanized folding supports at rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted externally on the front wall ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin electrical connector * LED tail lights ----Cargo Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted smooth sheet steel front wall * Drop sides made of trapezoidal steel sheet, foldable, with drop-side spring assist * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated external frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Option to install 3 t swing lashing rings every 600 mm (5 lashing rings mounted on each side) * One 6.3 t lashing ring in each of the four corners front and rear * Various holes in the front and rear crossmembers for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear access, storage compartment below loading platform integrated into the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall * Dropside colour in RAL 9010 pure white * Painting of sidewalls in an RAL colour at additional cost possible ----Information: * New vehicle, unregistered * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release device for spring-actuated cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Towing Eye / Flange Tow Eye: * Towing bar adjustable in height by 300 mm * 40 mm flange tow eye ----General Attachments: * Jost landing gear front * Exterior folding support legs at the rear * Plastic toolbox, front right, mounted externally on the front wall * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform 5.37 m * 50 mm softwood floor * Bolted front wall made of smooth sheet metal * Drop sides made of trapezoidal-profiled steel, foldable with drop side spring assist * Steel rear wall, slide-in panel between ramp holders - stowed in front of the front wall when not in use * Rear stakes bolted ----Load Securing: Redpol Th Nrefx Ahhow * Perforated outer frame, angled approx. 45 degrees with 2 t lashing capacity at 480 mm intervals * Option to equip with 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Approach slope at the rear approx. 860 mm chassis height ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, tailgate, folding supports, and access ramps hot-dip galvanized * Axles, springs, air tanks, 40 mm flange tow eye painted in black * Sideboard painted RAL2011 deep orange * Painting of side panels in any RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 ton Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Eye: * Drawbar height adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal - no installation required on truck side * 15-pin power plug * LED lighting system 12 / 24 V * EBS multivoltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * Fold-out support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right, mounted on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Provision for subsequent installation of container locks in front of the bulkhead * Bolted 400 mm bulkhead made from smooth sheet * Rear stakes bolted * Side boards with spring-assist lifting Rjdsrwc R Repfx Ahhsw ----Load Securing: * Perforated outer frame, approx. 45 degrees angled, with 2 tonne lashing force every 480 mm * Installation of 3 tonne folding lashing rings possible every 600 mm * Each corner at front and rear equipped with 1 x 6.3 tonne lashing ring * Various drillings in front and rear cross members for 1.2 tonne lashing option * Profifix lashing rail centrally along the longitudinal axis for securing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh ramps, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydraulic flow divider in the trailer (for truck-side hydraulic pump flow rates over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, front wall, mechanical supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange-eye painted in black * Side boards painted in RAL 9010 pure white * Painting of side walls in any RAL color available at extra charge ----Info: * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Available immediately from Egestorf

Durum: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Braking System: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange Tow Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange tow eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED lighting ----General Attachments: * Landing gear at the front * Fold-out stabilizer legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside at the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * At the front bulkhead and rear incline, provision for retrofitting container locks for transporting 20'' containers * Bolted bulkhead made of smooth sheet metal * Drop-side walls made of trapezoidal steel sheet, central split, folding * Steel rear wall - insertable between the ramp mounts, can be stowed inside at the front bulkhead when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each corner, front and rear * Various holes in the front and end cross-members for 1.2 t lashing options * Profifix lashing rail, centrally along longitudinal axis, for securing up to LC 3000 daN ----Ramps: * One-piece mechanical mesh ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be closed to 20 mm) * Rear approach angle, approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 ----Paintwork: Redpfjv Eq Evox Ahhsw * Drawbar, bulkhead, rear flap, folding legs, and ramps hot-dip galvanized * Axles, springs, air tanks, flange tow eye and landing gear painted black * Side walls painted to RAL color of choice (excluding special or metallic colors), changeable up to approx. 6 weeks before completion ----Information: * Reinforced and certified body according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 30 / 2026

Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12/24 V * 15-pin socket ----General Attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood flooring * Fitting for retrofitting container locks in front of the front wall * Bolted front wall made from smooth steel sheet * Side walls made from profiled sheet steel, foldable with drop-side spring assistance * Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use * Rear stakes bolted * Beveled rear drive-on angle approx. 860 mm ----Load Securing: * Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm * Option to install 3 t drop lashing rings every 600 mm Rodeq Dyvyjpfx Ahhsw * 1 x 6.3 t lashing eye at each front and rear corner * Various holes in front and rear cross-member for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps * Drop-side color in RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra charge ----Information: * -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate -- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 10.360 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange-type drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with indicator function in the truck via EBS signal, no truck-side installation required) * LED lighting system * 15-pin electrical connector ----General attachments: * Jost landing gear at the front * External hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Prepared for retrofitting of 20" container locks at front and rear * Bolted smooth steel bulkhead * Side walls made from trapezoidal-profiled steel, foldable, equipped with drop-side spring assistance * Screwed, hot-dip galvanized rear stanchions Rodpfx Ajpk D Dqshhjw ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (carrying capacity 8 t per pair), suitable for rubber-tired and tracked vehicles, stowed at the rear in a compartment integrated under the loading area in the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Durum: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release system for spring brake cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Height-adjustable drawbar, 300 mm range * 40 mm flange towing eye ----General Attachments: * Jost landing gear at the front * External foldable support legs at the rear * Plastic toolbox, front right, mounted externally on the front bulkhead * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ (tyre pressure monitoring) * LED lighting ----Loading Platform: * Loading length 5.37 m * 50 mm softwood floor * Bolted front bulkhead made of smooth sheet steel * Drop sides made of trapezoidal profiled steel, foldable, with drop side spring assist * Rear wall made of steel, can be slid between the ramp holders forward of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * One 6.3 t lashing ring in each front and rear corner Rsdpfx Ahjl Th Ncshjw * Various holes in front and end crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical steel grating ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Approach slope at rear approx. 860 mm chassis height ----Tyres: * 235/75 R 17.5 tyres ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, bulkhead, tail gate, support legs, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flange towing eye painted black * Drop sides painted in RAL2011 deep orange * Sides can be painted in any RAL color at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex works Egestorf

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic brake system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Drawbar adjustable in height by approx. 300 mm * 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted exterior on bulkhead ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----Cargo Area: * 50 mm softwood floor * 20" container locks, mounted at front and rear * Bolted smooth sheet steel bulkhead * Drop-down trapezoidal profile steel side walls with spring-assisted wall lifters * Bolted, hot-dip galvanized rear stakes ----Load Securing: * Perforated outer frame, bent at approx. 45°, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing brackets every 600 mm (5 lashing rings fitted on each side) * 1 x 6.3 t lashing ring at each front and rear corner * Various boreholes in the bulkhead and rear cross-member for 1.2 t lashing options ----Ramps: * 1 pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear-accessed storage compartment for ramps, integrated under the loading area within the chassis ----Paint / Finish: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Drop side color RAL 9010 pure white * Side wall painting in a RAL color of your choice available at extra cost ----Information: * New vehicle without registration * Subject to errors and prior sale ----Delivery Time: * Available immediately ex Egestorf Redpfx Ahjl Tilxohew

Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flanged towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flanged towing eye ----Lighting / Electrics: * RDÜ (Tire Pressure Monitoring System) * LED taillights 12/24 V * 15-pin electric connector ----General Attachments: * Jost landing gear at front * External hot-dip galvanized folding support legs at rear * Plastic toolbox, front right outside on front wall * Side underrun protection * Plastic quarter mudguards ----Low-bed loading area: * 50 mm softwood floor * Preparation in front of bulkhead for later installation of container locks * Bolt-on smooth steel front wall * Side walls made of trapezoidal steel sheet, foldable, with drop side lifting device * Steel rear wall, insertable between ramp mounts; when not in use, stored inside in front of bulkhead * Bolt-on rear stanchions * Rear approach angle approx. 860 mm ----Load securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Provision for fitting 3 t lashing rings every 600 mm * In each corner at front and rear: 1 x 6.3 t lashing ring Rodpepk Dv Refx Ahhjw * Various drilled holes for 1.2 t lashing points in front and rear crossmembers ----Ramps: * One-piece mechanical grid ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (collapsible to 20 mm width) ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, tailgate, and ramps * Drop side color in RAL 9010 pure white * Painting of side walls in a RAL color of your choice available at extra cost ----Info: * --Reinforced and certified body according to EN 12642 XL, including load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durum: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E braking system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake coupling ----Axle: Rjdpfx Ahex Dp Atehjw * 2 x ton SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with ride height +30 mm via actuator cylinder * Start-up assist for manoeuvring and forced lowering to the first axle – controlled via speed-dependent EBS electronics – (no truck-side installation required, includes cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flanged towing eye – height-adjustable by +77 mm and -33 mm – for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary socket * LED lighting system 12 / 24V * 2 LED reversing lights, activated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Radio remote power supply 12+24 V via tail light ----General Attachments: * BPW landing gear front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminium rims * Drop-in-pin towing coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell individual mudguards * Two-step access in front of the bulkhead, left side * Shovel and broom holder in front of the bulkhead * 2 stainless steel toolboxes – matt finish – approx. 650 x 350 x 320 mm, right-hand side * Enclosed side underrun protection can be used as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor) rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right-hand side front) with operation via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame made of high-tensile fine-grain steel * 20,000 kg pulling force * Hook height 1,570 mm * Control of the hooklift device via remote control * Remote control with fast function when unloading but not when loading * Emergency stop buttons on both left and right sides * Container saddle with 4 supports per side and 1 roller at the rear per side * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist with main arm lifting * 2 x mechanical drop-down supports at the rear * Approved for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the charging cradle, the service brake must be applied to enable wireless release. The brake connections must remain coupled in order to operate the hydraulically/pneumatically controlled valves. * Monitoring system for underrun protection to ensure it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, step, underrun protection and drop supports hot-dip galvanized * Axles, air tanks, front landing gear painted in black * Palfinger hooklift painted black/yellow ----Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is available immediately

Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox installed on the right front exterior of the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: Rjdpfx Asxglibohhsw * 50 mm softwood flooring * Prepared fixture in front of the bulkhead for later installation of container locks * Bolt-on bulkhead made from flat sheet steel * Drop-down side panels made from trapezoidal steel sheets with sideboard spring assist * Steel rear panel can be inserted between ramps – storage holder provided inside the bulkhead when not in use * Rear stanchions bolted ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashings every 600 mm * In the corners (front and rear), each fitted with 1 x 6.3 t lashing ring * Various drill holes in the bulkhead and end cross member for additional lashing points at 1.2 t ----Ramps: * One-piece mechanical mesh ramps with spring assist for one-person operation, approx. 2,750 x 600 mm (can be retracted to 20 mm thickness) * Rear approach angle approx. 860 mm ----Painting: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear panel * Side panel color in RAL 9010 pure white * Side panel painting in another RAL color available at extra cost ----Information: * --Reinforced and certified bodywork according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available from approx. CW 30/2026

Durum: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4: ----Brakes: Rodpfxsl Th Dmj Ahhow * Wabco ABS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Tow Bar / Flange Drawbar Eye: * Height-adjustable tow bar (+/- 150 mm) * 40 mm bolted drawbar eye ----General Attachments: * Jost landing gear at the front * Side underrun protection * Foldable rear A-plate ----Electrics / Lighting: * 15-pin electrical connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding sheet metal plate 750 x 1,000 mm at the front, including 2 removable trough stops at the front, insertable in 2 positions * Rear traverse for mounting aluminum loading ramps, including 2 additional rear drop stands ----Loading Edge: * Unladen loading height approx. 710 mm ----Load Securing: * 4 repositionable trough stops, insertable in 2 positions for lateral centering of the troughs * On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, tow bar, and rear drop stands hot-dip galvanized * Axles, springs, landing gear, and air tanks painted in black ----General Information: * Vehicle has a one-day registration in 06/2024 due to missing tire pressure monitoring system, and has not been loaded or used * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf on the A7

Durum: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E brake system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake connection ----Axle: * 2 x SAF axles, rated at required tonnage * First axle configured as a lift axle (fully automatic) * Lift axle with ride height +30 mm via control cylinder * Start-assist function for maneuvering and forced lowering to the first axle — switchable via speed-dependent EBS electronic system (no installation required on the truck side, with additional cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering via radio remote control ----Drawbar / Flange Towing Eye: * 50 mm bolted flange towing eye — height-adjustable by +77 mm and -33 mm — for 2 t support load ----Electric / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights, actuated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * Extended connection cables for agricultural and forestry vehicles * Wireless power supply 12V + 24V via tail light circuit ----General Attachments: * BPW support winch at the front * Mechanically extendable underride guard for container lengths over 6,000 mm * Speedline diamond-finish aluminum rims * Detachable pin-type towing coupling (use only with retracted underride guard) * Enclosed plastic half-shell single mudguards * Two-step access ladder in front of the bulkhead, left side (direction of travel) * Shovel and broom holder in front of the bulkhead * 2 matte stainless steel toolboxes approx. 650 x 350 x 320 mm, mounted laterally on the right * Enclosed side impact protection, usable as advertising space ----Hydraulics: * Dual-circuit hydraulic connections (engine side from truck/tractor), rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right, direction of travel) with remote control operation ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift device (serial no. 100746129, year 2023) * Main frame constructed from high-strength fine-grain steel * 20,000 kg lifting capacity * Hook height 1,570 mm Rjdpfx Ahsx Dp Agohsw * Hooklift operation controlled by radio remote * Remote with fast function for unloading, but not for loading * Emergency stop switches on both left and right sides * Container supports: 4 lateral supports per side and 1 rear roller each side * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist main arm lifting * 2 mechanical drop supports at the rear * Approval for 20 tonnes gross vehicle weight (2 x 9 t axles) and 2 t support load * Note: If the remote control is removed from its charging station, the service brake must be applied to enable radio operation. Brake connections must remain connected at all times to allow electro-hydraulic/pneumatic valves to open * Monitoring system for underride guard to ensure it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lift axle lowered ----Paintwork: * Chassis, drawbar, step, underride protection, and support legs hot-dip galvanized * Axles, air tank, and front support winch painted in black * Palfinger hooklift painted in black / yellow ----Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is available immediately

Durum: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and adjustable height mechanism ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring), display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Tool box made of powder-coated sheet steel, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets made of galvanized sheet metal, approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic impact buffer * Mechanical drop-down supports at the rear Rsdpfx Ahjl Thv Rehew ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll containers * Steel floor with wheel recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point locking clamps and mechanically insertable front stops in the rail, cargo securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a max. volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops inserted with pivoted stop * Weld bead as anti-slip coating in the run-up ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning equipment for positive and frictional securing of skips * 4 lashing cleats each in cloverleaf design (side) * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminum approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible total weight of 20,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. CW 44 / 2026

Durum: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 18.0: * 3-in-1 functionality: suitable for roll-off containers, skip containers, and as a low loader ---- Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release for spring-loaded cylinders ---- Axles: * 2 x 12 t Gigant axles ---- Suspension: * Parabolic springs ---- Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and height adjustment mechanism ---- Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS display capability in the truck via EBS signal (no truck-side installation required) ---- General Attachments: * Toolbox made of powder-coated steel sheet, mounted on the right side * Side underrun protection * Quarter plastic mudguards with spray protection * Storage box for container nets, made of galvanized sheet metal, approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic bump stops * Mechanical drop-down supports at rear --- Loading Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide roll-off containers * Steel floor plate with roller recesses in the bogie area * For roll-off container transport, possible container lengths from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking as well as mechanical plug-in stop angles at the front in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Including 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops often with swiveling stops * Welded seam as anti-slip coating in the ramp area ---- Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning elements for positive and non-positive securing of skips * 4 lashing brackets in cloverleaf design on each side * 1 pair of 13.4 t UVV lashing rings at the front ---- Ramps: * 1 pair of aluminum approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at rear) Rodpfsl Thwcox Ahhsw ---- Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible total weight of up to 20,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to errors and intermediate sale ---- Delivery Time: * Available from approx. calendar week 44 / 2026

Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Braking System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye ----General Accessories: * Jost mechanical support winch at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic tool box, approx. 750 x 350 x 300 mm, mounted laterally on the right * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Body: * Mesh hooks on the side and rear at the central locking mounts, plus 2 on the front wall * Three-way steel pallet tipper body (continuous side walls – no center stanchions – can be folded down with board wall spring lifter) * Rear stanchions bolted * Combo steel wing doors, rear, 2-leaf, asymmetrically split, can pivot and lock up to 270°, not foldable, plus with additional swinging frame for automatic rear flap opening during tipping; locking via galvanized turn bar lock and central locking system * Deactivation function for automatic rear flap operation when tipping in reverse with the wing door open * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load Securing: Rodpel Thyxofx Ahhsw * 1 x 5 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment accessible from the rear, recessed under the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper bed, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Painting of side walls in a different RAL color available at extra charge * Axles, springs, flange eye, air tanks, and support winch painted black ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle, unregistered, with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex Egestorf on the A7

Durum: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4: ----Braking System: * Wabco ABS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolted towing eye ----General Attachments: * Jost landing gear at the front * Side underrun protection * Foldable rear A-shield ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made from 50 mm softwood * 1 sliding plate 750 x 1,000 mm positioned at the front, incl. 2 moveable trough stops at the front (plug-in, 2 positions each) * Rear crossmember suitable for use with aluminum approach ramps, incl. 2 additional drop-down supports at the rear ----Loading Edge: * Unladen loading edge approx. 710 mm ----Load Securing: * 4 repositionable trough stops, can be plugged into 2 positions for lateral centering of the troughs * On each side: 1 x (13.5 t) UVV tie-down point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with equalizing chain and quick-shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm Rodsl Th Eyopfx Ahhew ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized * Axles, springs, landing gear, and air reservoir painted in black ----General Information: * The vehicle has a day registration from 06/2024, has not been in use or loaded due to the absence of a tire pressure monitoring system * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately ex Egestorf on the A7

Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Braking system: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders ----Axles: Rsdpsxglh Rjfx Ahhow * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange drawbar eye: * Drawbar adjustable in height by approx. 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tyre Pressure Monitoring System) * LED lighting ----General attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox on the front right outside of the front wall * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Preparation in front of the front wall for subsequent installation of container locks * Bolted front wall made of smooth sheet metal * Drop sides made of trapezoidal sheet steel, foldable with side board spring lifter * Rear wall made of steel, slidable between the ramps – storage bracket inside front wall when not in use * Removable rear stanchions (bolted) ----Load securing: * Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various mounting holes in front crossmember and rear end carrier for 1.2 t lashing points ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be nested up to 20 mm) * Rear approach slope approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, ramps, and rear wall * Platform side wall color in RAL 9010 pure white * Painting of the side walls in any RAL color available at extra cost ----Info: * --Reinforced and certified structure according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 30/2026

Durum: yeni, azami yük ağırlığı: 10.360 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 14.4: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flanged Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flanged towing eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with display capability in the truck via EBS signal, no in-truck installation required) * LED lighting system Rjdpfondpn Sox Ahhsw * 15-pin electrical connector ----General Attachments: * Jost landing leg at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Provisions for subsequent installation of 20" container locks at the front and rear * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal profiled steel sheet, foldable with drop side spring assist * Bolted hot-dip galvanized rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option to fit 3 t folding lashing brackets every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles, stowage compartment at the rear housed under the load platform in the chassis ----Painting: * Hot-dip galvanized chassis, drawbar, front and rear walls * Vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm, total length 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * LED lighting ----General Attachments: * Support winch at the front * Fold-out external support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation for retrofitting container locks in front of bulkhead and rear slope for transporting 20" containers * Bolted smooth steel bulkhead * Side walls made of trapezoidal steel sheet, split and foldable once in the center * Rear wall made of steel, can be slid and stored between the ramp holders when not in use, inside in front of the bulkhead * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing eyes at 600 mm intervals * In each front and rear corner: one 6.3 t lashing ring * Multiple holes for 1.2 t lashing options in front and rear crossmember * Profifix lashing rail along centerline for lashing up to LC 3,000 daN ----Ramps: * One-piece mechanical grating ramps with spring assist for one-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm thickness) * Rear approach angle approximately 860 mm on chassis ----Wheelbase: * Wheelbase 1,140 mm ----Paintwork: * Drawbar, bulkhead, tailgate, support legs, and loading ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and support winch painted in black * Side walls painted in RAL color of choice (no special or metallic paints), can be changed up to approx. 6 weeks before completion Redpfx Ahov D Tcbehsw ----Information: * Reinforced and certified body according to EN 12642 XL, including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 30 / 2026

Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Platform: * Mesh hooks on the sides and rear within the central locking mounts, plus 2 hooks on the front wall * Steel pallet three-way tipper body (continuous sidewalls – without intermediate stanchions – foldable, with tailgate spring assist) * Bolted rear stanchions * Combination steel double rear wing doors, asymmetrically split, 270° swing and lockable but not foldable, plus additional pendulum frame for automatic tailgate opening during tipping. Locking via galvanized locking bar and central locking. * Deactivation feature for automatic rear tailgate when tipping backward with an open wing door * 4 mm steel floor plate * Ramp rack at rear for drive-up ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing eyes on each side, integrated in the outer frame ----Ramps: * 1 pair of aluminum drive-up ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment fitted underneath the loading area in the chassis Rsdpfel Thymjx Ahhow ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical drop legs: hot-dip galvanized * Sidewalls and tailgate: painted RAL 9010 pure white * Other RAL colors for sidewalls available at extra cost * Axles, springs, flange towing eye, air reservoirs, and landing leg: painted in black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, sold with manufacturer's warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf at the A7

Durum: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: Rodpsrwc R Ajfx Ahhsw * Parabolic springs with compensating unit ----Drawbar / Flange eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General fittings: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted externally to the right front bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Fixture in front of bulkhead for subsequent installation of container locks * 400 mm bolt-on smooth steel front bulkhead * Bolt-on rear stanchions * Drop sides with spring assist ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various holes in front and rear crossmember for 1.2 t lashing option * Profifix lashing rail installed centrally in longitudinal axis for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps approx. 2,750 x 600 mm (can be collapsed to 20 mm gap) * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, front bulkhead, mechanical drop supports, and ramps galvanized * Axles, springs, air tank, front support winch, and flange towing eye painted black * Drop sides painted in RAL 9010 pure white * Side walls painted in any RAL color at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Immediately available from Egestorf

Durum: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm – drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * Removable LED beacon (rear) ----General Attachments: * Support winch at the front * External hot-dip galvanized folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * Preparation in front of the bulkhead for retrofitting container locks * Bolt-on smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel, folding with tailgate spring lifter * Steel rear wall slidable between the ramps (holder for stowage when not in use located inside at the front bulkhead) * Detachable rear stanchions * Rear approach slope approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm-wide rubber cover strip on the inner side of the ramps * On the approach slope and externally on the low-loader platform (from bulkhead to end cross member), each with a 12 mm thick and 210 mm wide rubber cover strip ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Installation of 3 t pull-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring each at the front and rear corners * Various 1.2 t lashing points in the bulkhead and end cross member through multiple boreholes ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 870 mm (can be compressed to 20 mm apart) ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, and loading ramps are hot-dip galvanized Rsdpfxsx Ipape Ahhew * Axles, springs, air tank, and flange towing eye painted black * Side walls painted RAL 9010 pure white ----Information: * --Reinforced and certified body to EN 12642 XL, including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer’s warranty ----Delivery Time: Vehicle available immediately

Durum: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders Rjdpfeykx I Hsx Ahhew * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Durum: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: Rodjykx I Tepfx Ahhow * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp