Kullanılmış Müller-Mitteltal 24 To. Kombi Cont. Fl.-Liftachse Neu satın al (39.124)

Durum: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual rear lowering ----Axle: * 3 x 11 t Gigant axles * Middle axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Fittings: * Tool box made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets, made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear impact protection buffer * Mechanical drop-down supports at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide roll-off containers * Steel floor with recessed rollers in the bogie area * When transporting roll-off containers, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point container locking as well as mechanically insertable end stops at the front in the guide rails * Load securing certificate in accordance with DIN 30722-1 * Transport of up to 2 skip containers with a max. volume of 10 m³ possible * 8 movable skip stops for lateral centering of the skips, front 4 skip stops insertable with oscillating end stop Ppjdpfx Ahjpk D Awehsu ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips * 4 side lashing cleats (cloverleaf design) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Welded anti-slip strip in the running area of the ramp incline * 1 pair of aluminum approach ramps (16 t / pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tires: * Tires: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Side and rear contour tape, reflective * Axles, turntable, drawbar, and air tanks painted black * Hot-dip galvanized main frame ----Information: * Technical permissible gross weight up to 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026

Durum: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual rear lowering ----Axle: * 3 x 11 t Gigant axles * Center axle can be lifted ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment ----Electrics / Lighting: * LED tail lights * 15-pin power connector Ppedpfxetplv To Ahheu * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Tool box made of powder-coated steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray suppression * Plastic rear bumper pads * Mechanical rear safety support legs ----Container / Low-loader Platform: * Hot-dip galvanized main frame with raised outer rails (approx. 25 mm higher) for guiding roll-off containers * Steel floor with roller depressions in the turntable area * For roll-off container transport, container lengths from 5,500 - 7,000 mm possible * Pneumatic 4-point locking system and mechanical plug-in end stops at the front of the running rails * Load securing certificate as per DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 removable skip container stops for lateral centering, front 4 stops with swingable end stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on each side for attaching tie-down elements for positive and non-positive securing of skip containers * 4 cloverleaf-style lashing bars (each side) and 1 pair of 13.4 t UVV lashing rings to the front * Load securing certificates per DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Welded bead as anti-slip surface in the ramp track area * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Tires: * Tires: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides & rear * Axles, turntable, drawbar and air tanks painted in a shade of black * Hot-dip galvanized main frame ----Info: * Gross vehicle weight of 27,000 kg technically possible * New vehicle without initial registration, with manufacturer warranty * Errors and prior sale reserved ----Delivery Time: * Available from approx. week 47/2026

Durum: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle with lift function ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & adjustable height device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic impact protection buffers * Mechanical drop-down supports at the rear ----Container / Low Loader Platform: Ppjdpfopk D Iijx Ahhou * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with wheel recesses in the bogie area * Suitable for roll-off containers with a container length of 5,500 - 7,000 mm * Pneumatic 4-point clamp-locking system plus mechanical plug-in front stops in the running rails * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip container stops for lateral centering, front 4 stops lockable with pivoting backstop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tension elements to secure skip containers positively and non-positively * 4 lashing rails per side (cloverleaf design) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Weld beads as anti-slip surface in the track area of the ramp slope * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tires: 235/75 R17.5 ----Loaded Platform Height: * Platform height loaded: approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Paintwork: * Contour tape, reflective, on sides and rear * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanized main frame ----Info: * Technical permissible total weight: 27,000 kg * New vehicle without first registration with manufacturer warranty * Subject to alterations and prior sale ----Delivery time: * Available from approx. week 47/2026

Durum: yeni, azami yük ağırlığı: 14.650 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2024, * RS-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release mechanism for spring brake cylinders * Disc brakes * Duomatic brake coupling * 2 x 10 t SAF axles * Air suspension with automatic lowering when uncoupling the brakes * Drawbar, 2,300 mm long with 40 mm towing eye and height adjustment via tension spring & spindle * Right-side plastic toolbox, enclosed plastic fenders * Side closed underride protection, usable as advertising space * Rear underride protection with 2 impact buffers * Foldable "A" sign at the rear for waste disposal * LED rear lights with protective cover * 2 x 7-pin power sockets * Chassis hot-dip galvanized (excluding air tank, axles, drawbar, etc.) * Roller conveyor length approx. 6,950 mm * Rolling container secured by pneumatic 4-point claw locking system * At the front, 2 plug-in container stops with 2 additional plug-in positions * Unladen ride height approx. 1,165 mm * --Technically permissible gross weight of 20,000 kg-- * Suitable for 5,000 – 7,000 mm container lengths * New vehicle with manufacturer's warranty * Errors and intermediate sale excepted Ppedol Tqkwspfx Ahheu * Immediately available ex works Egestorf

Durum: yeni, azami yük ağırlığı: 14.650 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2024, * RS-T 18.0 / 018: * Wabco EBS-E (electronic braking system) Ppodpfx Asl Tpy Hshhju * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinder * Disc brakes * Duomatic brake coupling * 2 x 10 t SAF axles * Air suspension with automatic lowering when the brake is uncoupled * Drawbar 2,300 mm long with 40 mm towing eye and height adjustment via draw spring & spindle * Plastic toolbox on the right side, closed plastic fenders * Side closed underride guard usable as an advertising surface * Rear underrun protection with 2 crash buffers * Folding "A"-board at the rear for waste disposal * LED rear lights with protective canopy * 2 x 7-pin electrical plugs * Chassis hot-dip galvanized (except air tank, axles, drawbar, etc.) * Roller track length approx. 6,950 mm * Rolling container secured with pneumatic 4-point claw locking system * At the front are 2 plug-in container stops with 2 additional plug-in positions * Ride height unladen approx. 1,165 mm * --Technically permissible gross weight of 20,000 kg-- * Suitable for container lengths of 5,000 – 7,000 mm * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at rear ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle ----Lighting / Electrical: * RDÜ Tire pressure monitoring system * Multi-voltage electrical system * LED tail lights 12 / 24 V * Removable rotating beacon at rear * 15-pin power connector ----General Attachments: * Side underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Stainless steel front mudguards (enclosed), as well as straight galvanized steel skirts at rear, each with splash protection * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Four stake pockets per side (stakes not included) with integrated lashing option ----Load Securing (La-Si-Package consisting of): * 2 lashing rings (6.4 t) front left and right on the main frame of the turntable platform * 6 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame * In corners 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical folding extensions for 3 m total width (excluding rear taper) * Widening planks stowed in center of cargo area ----Ramps: * Hot-dip galvanized, single-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically width-adjustable * 4-way valve block for retrofit of hydraulic lateral ramp shifting ----Cargo Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm Ppsdpfx Aol Th I Ashhju * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm approach slope) ----Tyres: * 235/75 R 17.5 twin tires ----Unladen Weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 19.0: ----Braking System: * Wabco EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs - 110 mm wide - with tandem equalizing unit ----Drawbar / Flange Eye: Drawbar with 50 mm flange eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin power connector * LED rear lights * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear at front * Outward folding rear support legs * Side underrun protection * Plastic quarter mudguards ----Low-loader Deck: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Foldable, trapezoidal-profile steel side walls with drop-side lifting assist * Slide-in steel rear wall between the ramps (storage bracket at the front when not in use) * Screw-mounted rear stanchions ----Load Securing: * Perforated outer frame, angled approx. 45 degrees, with 2 t lashing points every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 10 t lashing ring at each front and rear corner; various holes in the front and rear crossmembers for 1.2 t lashing points * Profifix lashing rail centrally along the longitudinal axis for lashing loads up to LC 3,000 daN ----Ramps: * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be retracted to 20 mm) * Rear ramp approach angle approx. 860 mm ----Painting: * Chassis, drawbar, bulkhead, rear wall, loading ramps and folding supports hot-dip galvanized * Side walls painted in RAL 9010 pure white Ppodpfx Ahel Th Hwehou * Side wall painting in any RAL color available at extra charge * Axles, springs, air tanks, flange eye and landing gear painted black ----Info: * New vehicle with full manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Immediately available ex Egestorf on the A7

Durum: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0 ----Brake System: * EBS braking system * Emergency release for spring-actuated brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle equalization at the rear ----Drawbar: * Drawbar with 50 mm draw eye and height adjustment via tension spring & turnbuckle ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED tail lights 12 / 24 V * Removable beacon at the rear * 15-pin power connector ----General Attachments: * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front: enclosed plastic mudguards; rear: straight galvanized steel mud flaps, each with splash guards * Tool box made of galvanized steel sheet, black powder-coated, approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox on the turntable platform * Four stake pockets per side (stakes not included), each with integrated lashing option ----Load securing (La-Si package comprises): Ppedpfjl Th Nnsx Ahhsu * 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions, recessed into the outer frame * 13.4 t at the corners, otherwise 10 t ----Widening: * 6 pairs of mechanical folding outriggers for a total width of 3 m (not at the rear chamfer) * Widening planks stored in the middle of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way valve block for retrofitting hydraulic side ramp displacement ----Loading area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm entry slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black ----Information: * Permissible gross weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, RAK 18,0 Dış Silindirli, Geriye Eğmeli Fonksiyonlu ----Fren: * Wabco EBS-E (elektronik fren sistemi) * Yaylı silindirler için acil boşaltma mekanizması * Kampanalı (tambur) frenler ----Aks: * BPW Eco Plus akslar ----Süspansiyon: * Havalı süspansiyon (fren ayrıldığında otomatik alçalma) ----Çekiş Makası: * Pnömatik olarak alçaltılabilen, yaklaşık 2.100 mm uzunluğunda, 40 mm çekme gözlü ve çekme yay & gergi kelepçesi ile yükseklik ayarlı çekiş makası ----Genel Donanım Parçaları: * Sağ yan tarafta plastik takım kutusu - yaklaşık 858 x 500 x 500 mm * Kapalı plastik çamurluklar ön ve arka * Kapalı yan çarpma koruması * Arkada cıvatalı alt koruma * Yaklaşık 1.000 x 500 x 500 mm galvanizli delikli sacdan konteyner ağları için saklama kutusu * Katlanabilir arka A levhası * Arka tampon koruma lastiği ----Elektrik / Aydınlatma: * 12 ve 24V elektrikli çekici araçlar için EBS çok voltaj sistemi * 15 pinli 24V güç fişi * 12 ve 24V için LED aydınlatma sistemi * Ek olarak 2 adet LED geri vites lambası * TPMS lastik basınç izleme sistemi ----Uygun Konteyner Uzunlukları: Ppedox Ipa Aopfx Ahhju * 6500 mm ile 7000 mm arası konteynerler için uygundur ----Konteyner Yüzeyi / Kasa: * Yaklaşık 2.180 mm boşluklu dıştan düz çelik ile yönlendirme ve her iki yanda 3’er yanaştırma parçası ile konteyner kılavuzu * Arkada, konteyner silindirlerini almak ve sabitlemek için, kaymayı önleyen, eğmeli çerçeveyle bağlantılı, pnömatik kilitli 2 adet derinleştirilmiş silindir yatağı * Roll konteynerlerin mekanik olarak kilitlenmesi, eğmeli çerçevenin ön kısmına yerleştirilmiş ve dışarıdan kumanda edilebilen pnömatik çapraz germe ünitesiyle (tek taraflı kullanım) * Şasi iç kısmı, geriye eğilebilir ana gövdeyle – tek borulu motorlu hidrolik eğmeli sistem – * Eğme açısı 42° * Şasi ve eğmeli çerçeve arasında kauçuk takozlar * Konteynerler önden sürülerek yüklenir, şasi sıcak daldırma galvanizlidir ----Lastik: * Tekli lastik 385/55 R 22,5 ----Yükleme Yüksekliği: * Boşken yaklaşık 1.270 mm ----Boya: * Alt koruma ve kilitleme parçaları (son kat boya yok) * Döner tabla, hava tankı, akslar, döner halka ve çekiş makası siyah renkte boyalı * Sıcak daldırma galvanizli ----Bilgi: * DIN 30722-1’e uygun konteyner taşımacılığı için * İlk tescilsiz yeni araç, üretici garantili * Hatalar ve ara satış hakkı saklıdır ----Teslimat Süresi: * Egestorf’tan hemen teslim

Durum: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RAK 18.0 Dış Makaralı, Geriye Kaldırma Fonksiyonlu ----Fren: Ppodpfx Ahjx Ipbmohju * Wabco EBS-E (elektronik fren sistemi) * Yaylı fren silindiri için acil açma tertibatı * Kampanalı frenler ----Aks: * BPW Eco Plus akslar ----Süspansiyon: * Havalı süspansiyon (fren bağlantısı kesildiğinde otomatik alçalma) ----Çekme Kolu: * Yaklaşık 2.100 mm uzunluğunda, 40 mm çekme gözlü ve yüksekliği çekme yayı & gergi ile ayarlanabilir, pnömatik olarak alçaltılabilir çekme kolu ----Genel Donanım: * Sağ yan plastik alet kutusu – yaklaşık 858 x 500 x 500 mm * Ön ve arka kapalı plastik çamurluklar * Kapalı yan yana çarpma koruması * Arka vidalı alt koruma * Galvanizli delikli sacdan mamul konteyner ağları için yaklaşık 1.000 x 500 x 500 mm'lik saklama kutusu * Arkada katlanabilir A levhası * Arka tampon koruma ----Elektrik / Aydınlatma: * Çekici araçlar için 12 ve 24V elektrik uyumlu EBS çoklu voltaj sistemi * 15 pinli 24V güç soketi * 12 ve 24V uyumlu LED aydınlatma sistemi * 2 ekstra LED geri vites farı * RDÜ Lastik basıncı izleme sistemi ----Uygun Konteyner Boyutları: * 6.500 mm – 7.000 mm arası konteynerler için ----Konteyner Kızak/Devirme Köprüsü: * Dış makaralı konteyner kılavuzu için yaklaşık 2.180 mm net mesafeyle düz çelikten yan sınırlama ve her iki yanda toplam üç adet merkezleme elemanı ile konteyner yönlendirme * Konteyner makaralarının alınması ve takılması için arka tarafta devrilme şasisiyle bağlantılı, uzunlamasına kaymaya karşı pnömatik kilitli, iki adet gömülü makara yatağı * Makaralı konteynerlerin kuvvetli kilitlenmesi, devrilme şasisinin önüne yerleştirilen ve dışarıdan kullanılabilen pnömatik çapraz gerdirme ünitesiyle (tek taraflı kontrol) * Şasi iç kısmı geri devirmeli ana gövdeli, motor hidrolik tahrikli, tek boru sistemli devirme tesisatı * Devirme açısı 42° * Şasi ile devrilme yapısı arasında lastik takozlar * Konteynerlerin önden itilerek yüklenmesi, tamamen galvanizli şasi ----Lastik ebadı: * Tekli lastik 385/55 R 22.5 ----Yükleme yüksekliği: * Boşken yaklaşık 1.270 mm ----Boya: * Alt koruma ve kilitleme parçaları (boyasız) * Dönebilen platform, hava tankı, akslar, döner tabla ve çekme kolu siyah tonunda boyalı * Galvanizli ----Bilgiler: * DIN 30722 Bölüm 1’e uygun konteyner taşımacılığı için * İlk tescilsiz, üretici garantili yeni araç * Hatalar ve ara satış hakkı saklıdır ----Teslimat süresi: * Egestorf’ta hemen teslim

Durum: yeni, azami yük ağırlığı: 12.200 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * TM-TA 14.4: ----Brakes: * Wabco EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles Pedpfx Asl Thyqjhhopu ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable, hot-dip galvanized drawbar +/- 150 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin power socket * LED tail lights * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear at front * 2 x external drop-down support legs at rear * Closed plastic single mudguards * Foldable A-sign at rear * Plastic underrun bumper with protection buffers * Hot-dip galvanized bumper with integrated chain storage box, size: W = 370 mm x D = 420 mm x H = 480 mm, front left & right ----Load Securing: * Each side with 2 x 5.3 t UVV lashing rings for attaching tensioning devices ----Container Stops: * 2 removable container stops for lateral centering of containers * Front container stops with pivotable stops, pluggable in 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air reservoirs, and landing gear painted black ----Information: * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery Time: * Available from approximately CW 38/2026

Durum: yeni, azami yük ağırlığı: 12.200 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * TM-TA 14.4: ----Braking system: * Wabco EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange drawbar eye: * Height-adjustable (±150 mm) hot-dip galvanized drawbar * 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin electrical connector Ppodpfxjpk Dyxj Ahhsu * LED tail lights * RDÜ tire pressure monitoring system ----General attachments: * Jost support winch at the front * 2 x external drop-down support legs at the rear * Enclosed single plastic mudguards * Foldable A-sign at the rear * Plastic underride guard buffer * Hot-dip galvanized impact guard with integrated chain storage box (W=370 mm x D=420 mm x H=480 mm), front left and right ----Load securing: * 2 x 5.3 t UVV lashing rings per side for attaching tensioning elements * Includes 2 permanently mounted ratchet tensioners with chain boxes on the external frame * Balancing chain on both sides with eye and quick-shortener, special Y-version, 6.3 t ----Skip stops: * 2 removable skip stops for lateral centering of containers * Front skip stops with swiveling stop, lockable in 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks, and support winch painted in black tone ----Info: * Certified lashing force with load securing certificate * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: * Available from approx. week 38/2026

Durum: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin connector * LED lighting system 12/24 V * 2 additional LED reversing lights at rear (operated via reverse gear) * 1 removable LED beacon (including holder) at rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 meter warning panel sets at the front and rear * Support crank at the front * Rear external folding supports * Plastic toolboxes approx. 750 x 350 x 300 mm, mounted on left and right sides * Lateral underrun protection * Rear underrun guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable, locking dimension retracted per ISO - DIN 15190 = 2,259 mm; container locks extended = 2,819 mm (this dimension is not to DIN) for an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, angled approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing eyes every 600 mm - 5 x 3 t UVV-certified lashing eyes installed on each side - * At each front and rear corner: 1 x 6.3 t lashing ring (front, directly behind the container locks in the wooden floor, and rear in the end cross member) * Various holes for 1.2 t lashing points in front and rear cross members ----Ramps: * 1 pair of aluminium slide-in ramps, approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Storage compartment at the rear, recessed in the chassis under the loading area ----Paintwork: * ---Chassis, drawbar, front wall, underrun guard, and rear supports hot-dip galvanized--- * Axles, air tanks, front support crank, and flange towing eye painted in black ----Information: Pjdpfx Ahev D Tbkjhepu * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 39/2026

Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel Ppedpjxf Skpofx Ahheu ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps Ppjdpfx Ahsxf Skvjhju ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durum: yeni, azami yük ağırlığı: 8.900 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: Ppjdpfx Ahjy U A Elohju * Air suspension with lifting and lowering system ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in B-dimension approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 removable LED beacon (incl. holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign packages front and rear * Landing gear at front * External folding rear supports * Plastic toolboxes approx. 750 x 350 x 300 mm on left and right sides * Side underrun protection * Rear underrun protection * Plastic quarter fenders ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable, locked dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) with an overall external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t drop-lashing brackets possible every 600 mm – fitted with 5 x 3 t UVV lashing brackets on each side – * Each front and rear corner fitted with 1 x 6.3 t lashing ring (front just behind the container locks in the wooden floor, rear on the end member) * Various holes in the front and rear member for 1.2 t lashing options ----Ramps: * 1 pair of aluminium slide-in ramps, approx. 3,310 x 410 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Rear accessible storage compartment under the loading area integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front landing gear, and flange towing eye painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available from approx. week 38/2026

Durum: yeni, azami yük ağırlığı: 8.900 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Platform: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B-dimension approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 LED beacon (removable, incl. holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign sets front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each side left & right * Side underride protection * Rear underride guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable up to 3 m container outer width) and lockable, locking dimension retracted as per ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm ----Load Securing: * Perforated outer frame angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible - laterally, 5 x 3 t UVV lashing rings on each side installed Pedpey U A Efjfx Ahhopu * In each corner front and rear, 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end beam) * Various bores in the front and end beams for 1.2 t lashing points ----Ramps: * 1 pair of aluminum slot-in ramps approx. 3,310 x 410 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Rear stowage compartment integrated under the loading area in the chassis ----Coating: * ---Chassis, drawbar, front wall, underrun protection as well as rear supports hot-dip galvanized--- * Axles, air tanks, front support winch as well as flange drawbar eye painted in a black tone ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample pictures ----Delivery time: * Available from approx. week 38/2026

Durum: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Braking System: * EBS (Electronic Braking System) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B-dimension approx. 8,080 mm) * 40 mm flange towing eye ---- Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) Psdpfx Ahov D Tbdjhspu * 1 removable LED rotating beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign packages at the front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, mounted left & right side * Side underrun protection * Rear underrun guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) at an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm – 5 x 3 t UVV lashing brackets installed per side * In the corners at the front and rear, one 6.3 t lashing ring each (front directly behind the container locks in the wooden floor, rear in the end crossmember) * Various bores in the front wall and end crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminum drive-on ramps approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment below the loading area, integrated in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun guard, and rear supports hot-dip galvanized--- * Axles, air tank, front support winch, and flange towing eye painted in a shade of black ----Additional Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 39/2026

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 2.140 kg, azami yük ağırlığı: 12.260 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, süspansiyon: çelik, lastik boyutu: 285/ 70 R 19,5, dingil mesafesi: 1.140 mm, römork freni: frenli römork, Üretim yılı: 2026, - TM-TA 14.4: - incl. 2 ratchet tensioners permanently mounted on the outer frame with chain box, each side with eyelet and quick-shortener in Y-special version, 6.3 t - Tensioning force with load securing certificate - Wabco EBS - RDÜ tire pressure monitoring system - Emergency release device for spring brake cylinders - Drum brakes - 2 x 7 t Gigant axles - Parabolic springs with compensation unit - Jost landing gear at the front Psdpjxuhy Eefx Ahhspu - 2 x external folding supports at the rear - Height-adjustable hot-dip galvanized drawbar +/- 150 mm - Hot-dip galvanized chassis - 15-pin electrical connector - LED tail lights - Enclosed single plastic mudguards - Foldable A-panel at the rear - Plastic impact protection buffers on underrun protection - Hot-dip galvanized underrun protection with integrated chain storage box B = 370 mm x D = 420 mm x H = 480 mm, front left & right - 2 interchangeable skip stops for centering skips laterally - Skip stops at the front with pendulum stop, insertable in 4 positions - 2 x 5.3 t UVV lashing rings per side for attaching tensioning elements - Axles, springs, air tanks, and landing leg painted in black - Subject to errors and prior sale - New vehicle with manufacturer’s warranty - Available from calendar week 05 / 2026

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 2.140 kg, azami yük ağırlığı: 12.260 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 285/ 70 R 19,5, dingil mesafesi: 1.140 mm, Üretim yılı: 2026, - TM-TA 14.4: - Wabco EBS - RDÜ tire monitoring system - Emergency release device for spring brake cylinders - Drum brakes - 2 x 7 t Gigant axles - Parabolic suspension with equalizing unit - Jost support winch at the front, 2 x external drop-down supports at the rear - Height-adjustable +/- 150 mm hot-dip galvanized drawbar - Hot-dip galvanized chassis - 15-pin power connector - LED tail lights - Enclosed plastic single fenders - Folding A-sign at the rear - Plastic impact protection buffers on the underride guard - Hot-dip galvanized underrun protection with integrated chain storage box (W = 370 mm x D = 420 mm x H = 480 mm) front left & right - 2 relocatable trough stops for lateral centering of the containers - Front container stops with pivoting stop, insertable in 4 positions - On each side, 2 x 5.3 t UVV lashing rings for attaching securing elements - Axles, springs, air tanks, and support winch coated in black - Errors and prior sale excepted - New vehicle with manufacturer's warranty Pjdpoxu Hpljfx Ahhopu - Available from week 05 / 2026

Durum: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, ETÜ-TA-R 19.0 ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar / Flange Drawbar Eye: * Drawbar with 50 mm flange drawbar eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector Podpfjpk D D Hox Ahhopu * LED tail lights ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Tool box made of galvanized sheet steel, approx. 650 x 350 x 320 mm, mounted right side, black powder-coated * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * Reinforcement package for drilling rig transport on the chassis – loading height + 20 mm * 50 mm softwood floor in clamped design * Preparation in front of front wall for retrofitting container locks * Front wall bolted, made from smooth sheet metal * Side walls made of profiled steel sheet – drop-down, with spring assistors * Rear wall, steel, slides between ramps – storage bracket in front of the front wall when not in use * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm * In each corner at the front and rear: 1 x 10 t lashing ring; various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be pushed together to 20 mm) * Rear approach slope approx. 860 mm ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a shade of black * Sideboard paintwork in RAL 9010 pure white * Side wall paintwork in a RAL color of your choice available at extra charge ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flange towing eye ----General Attachments: * Jost support windlass at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox mounted front right on the front wall exterior ----Electrics / Lighting: * Tire pressure monitoring system (RDÜ) * LED lighting ----Loading Platform: * Platform length 6.27 m * Suitable for container transport * 50 mm softwood floor * Preparation in front of front wall for retrofitting container locks * Bolted front wall in smooth sheet steel * Drop-down, trapezoidal-profile steel side walls with sideboard spring assist * Steel rear wall, can be stowed between ramp holders when not in use, secured inside in front of the front wall * Rear staking pockets bolted ----Load Securing: * Perforated external frame, angled at approx. 45 degrees, with lashing capacity of 2 t every 480 mm * Optional installation of 3 t recessed lashing rings every 600 mm possible * In each corner (front and rear), 1 x 6.3 t lashing ring * Various holes in the front and rear carriers for 1.2 t lashing options ----Ramps: Pjdpfxoq Ra D Ee Ahhjpu * One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear drive-up angle approx. 860 mm ----Tires: * Tires: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear accent and loading ramps * Board sides painted in RAL 9010 pure white * Optional painting of the side walls in another RAL color available at extra cost ----Information: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery Time: * Available from week

Durum: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 21.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders Ppedpel Tihxofx Ahhsu * Drum brakes ----Axle: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with raising and lowering system ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Lighting / Electrics: * 15-pin electrical connector * LED lights 12/24 V * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Preparation before the front wall and rear slope for retrofitting container locks for transporting 20" containers * Designed for 21 t GVW with reinforced frame and axles * Reinforcement package on the chassis for transporting drilling equipment * 50 mm softwood floor in clamped design * Front wall provided with preparation for retrofitting container locks * Bolted front wall made of smooth sheet steel * Split, fold-down side walls made of trapezoidal-profiled sheet steel with centrally mounted folding stanchion * Steel rear wall insertable between the ramps – storage bracket for unused panel inside at the front wall * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t retractable lashing rings every 600 mm * Profifix lashing rail centrally positioned along the longitudinal axis for securing options up to LC 3000 daN * 1 x 10 t lashing ring at each front and rear corner * Lashing package with 2 x 8 t flush-mounted lashing rings per side in the outer frame; various holes for 1.2 t lashing options in front and rear cross beams ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (retractable to 20 mm) * Rear run-up angle approx. 860 mm from chassis ----Loading Heights: * Unladen approx. 940 mm * Laden approx. 910 mm ----Wheelbase / Tires: * 1,810 mm * Tires: 235/75R17.5 ----Painting: * Painting of the side walls in a RAL color of your choice (no special or metallic paints); can be changed up to approx. 6 weeks before completion * Drawbar, front wall, tailgate, folding supports, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images shown ----Delivery Time: * Available from week 29 / 2026

Durum: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-ER 19.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering facility ----Drawbar / Flange Drawbar Eye: * Drawbar with 50 mm flange drawbar eye and 110 mm height adjustment via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights 12 / 24 Volt ----General Attachments: * Jost landing leg at front * External folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped design * Fittings in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet * Split steel side walls, trapezoidal-profiled, foldable with folding stake in the center * Steel rear wall, slide-in between ramps (storage bracket for non-use inside in front of bulkhead) * Rear stakes bolted ----Load securing: * Perforated outer frame approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashings every 600 mm * Load securing package: in front and rear corners, each 1 x 10 t UVV-rated lashing point, each side 2 x 8 t UVV-rated lashing rings, retractable in outer frame; various holes for 1.2 t lashing option in front and rear cross members ----Ramps: * One-piece slide-in ramps, 12 t / pair, approx. 2,750 x 620 mm * Rear driving slope approx. 860 mm ----Loading height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 Ppjdpfsmi Tmasx Ahheu ----Paintwork: * Chassis, drawbar, bulkhead, rear gate, folding supports, and loading ramps hot-dip galvanized * ---Axles, air tanks, flange drawbar eye, and landing leg painted in black shade--- * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted / subject to change ----Delivery time: * Immediately available from Egestorf

Durum: ikinci el, boş ağırlık: 5.100 kg, azami yük ağırlığı: 12.900 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 12/1998, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 1 mm, toplam uzunluk: 2.550 mm, toplam genişlik: 1.600 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, dingil mesafesi: 5.400 mm, renk: turuncu, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), lashing rings, container locks, underrun protection, pneumatically adjustable drawbar, side aluminium side impact protection, twin tyres, storage box, removable side walls. Ppjdpfxji Rpxwe Ahhou Wheelbase: 5,400 mm. Body: Trailer for roll-off containers in lengths 6 m to 6.75 m, SAF axles type SKRZ 11030, pneumatic hook low-tension device, 2 x mounting pockets for plug-in locking hooks, 4 x pockets for plug-in container centring and container stops. The trailer can also be used as a flatbed! Aluminium side walls with a height of 600 mm are included with the trailer! Loading ramps available at an additional net price of €900. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to modifications, prior sale and errors!