Kullanılmış Müller-Mitteltal Chk Vakuumfass Mit Pumpe satın al (11.009)

Koşul: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering system and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as infotool, with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support legs at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder under chassis, right side ----Low Loader Platform: * Fifth wheel platform, front corners chamfered at 45°, with front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high drop-side aluminium side walls (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * 150 mm high rear wall slotted in place * Rear chamfer on the fifth wheel platform to the low-bed, approx. 700 mm long * Fifth wheel platform with 50 mm timber floorboards and low-bed platform with 60 mm timber floorboards * Checkered plate over the axles ----Widenings: * 8 x mechanical fold-out widenings to 3 meter overall width (except on the rear chamfer) (widening planks available, stored on the platform) * Mechanically adjustable warning panel sets front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform, 2 x 6.3 t lashing rings each side and three 5 t lashing bars on the outer frame * On the low-bed platform, each side 2 x 13.4 t lashing rings and 4 x 10 t swivel and lowerable lashing rings recessed into the outer frame * Each side 2 x 6.4 t lashing points and 1 lashing ring in the excavator stick recess at the rear * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Stick Recess: * Excavator stick recess runs continuously from the end of the last fixed axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer-side retrofitting of hydraulic ramp shifting * The outer board on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on bevel * Rubber on the ramp and drive-on bevel ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 l to 120 l/min) ----Loading Dimensions: * Fifth wheel loading platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm drive-on bevel) Ijdey Ngzyspfx Ab Tetg ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Painting/Finish: * Chassis, ramps, rear folding supports, widening brackets hot-dip galvanized * Axles, support winches, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images may show equipment not included in the offering ----Delivery time: * available from c

Koşul: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box installed on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General attachments: * Side underrun protection * Landing legs at the front as well as mechanical swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier under the chassis, right side ----Low loader platform: Isdpfx Asy Ngz Hsb Tetg * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high foldable and removable aluminum side boards (RAL 9010 pure white) on the saddle platform * Rear wall -150 mm- inserted * Rear slope on the saddle platform to the low-bed, approx. 700 mm long * Saddle platform with 50 mm wooden floor boards and low-bed platform with 60 mm wooden floor boards * Chequer plate over the axles ----Extensions: * 8 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension boards available with storage on the saddle platform) * Mechanically adjustable warning panel sets front and rear ----Load securing (Lashing Package): * On the saddle platform, 2 x 6.3 t lashing rings each, as well as 3 x 5 t lashing bars on each side in the outer frame * On the low-bed platform, 2 x 13.4 t lashing rings per side, as well as 4 x 10 t lashing rings swiveling and retractable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring at the rear in the excavator arm trough * 2 x container locks directly after the neck bend on the low-bed platform ----Excavator arm trough: * Excavator arm trough, continuous from the end of the last rigid axle through the steering axle up to the end crossmember, with internal reinforcement profiles, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading ramps: * Mechanically operated single-piece hot-dip galvanized hydraulic loading ramps approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer plank on the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the approach slope * Rubber on the ramp and the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump output from over 40 l/min up to 120 l/min) ----Loading dimensions: * Load area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed load area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension consoles are hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample pictures may contain equipment

Koşul: yeni, azami yük ağırlığı: 13.410 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, yükleme alanı hacmi: 11 m³, Üretim yılı: 2026, * KA-TA-R 18.0 ML * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display capability in the truck’s dashboard via EBS signal (installation on the truck side not required) * 2 x 9 t Gigant axles * Air suspension with level control during tipping operation * Drawbar with 50 mm flange eye (adjustable by +77 mm and -33 mm via offset plate) * Jost landing gear at the front * Foldable galvanized steel underrun protection for paver feeding * Closed individual plastic fenders * Standing platform at the front wall * Manual roll-up tarpaulin * 15-pin electrical connector * LED tail lights with galvanized protective cover Ijdpfxsxl Nkgs Ab Tetg * 2 LED reversing lights * Chassis made of fine-grain steel * Steel three-way tipper body (side walls with MM profile – continuous without central stanchion – side walls pendulum-mounted via manual central locking, left side foldable with wall spring assist) * Roll tarp similar to RAL 7038 agate grey, with tarp tensioning by side ratchets and front and rear tensioning rubbers * Front wall platform of grating with step at the drawbar and a hand grip on the front wall * Tailgate made of HBW 400 steel, pendulum-mounted with automatic double claw lock * 5 mm steel floor from HBW 450 steel * Each side with 4 x 3 t recessed and foldable lashing rings – integrated in the steel floor * Reinforced and certified structure according to EN 12642 XL including cargo securing certificate up to 19 t * Side wall painting in a RAL color of your choice (excluding special or metallic paints) – color can be changed up to approx. 6 weeks before delivery * Axles, air tanks, landing gear, flange towing eye painted in black tone * Chassis, underrun protection and drawbar hot-dip galvanized * New vehicle with full manufacturer’s warranty * Errors and prior sale excepted * Available from approx. week 44 / 2026

Koşul: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline ----Braking System: * Wabco EBS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (up to 300 mm), with 40 mm flange towing eye ----Electrics / Lighting: Itsdpfx Asq Euagob Tsg * RDÜ Tire Pressure Monitoring System * Multivoltage * 15-pin power connector * 12V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED rear lights ----General Attachments: * Manual landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox, right-hand side * Two-step entry at the front left (in direction of travel) * Bolted underrun protection * Plastic quarter mudguards ----Tipper Platform: * Mesh hooks on sides and rear at the central locking mounts, plus two on the front bulkhead * Steel platform superstructure, 3-way tipper (continuous side walls, without center stanchions, drop-down with tailgate spring assist, tailboard foldable and swinging via manual central locking) * 4 mm steel bed * Rear ramp mounting rail ----Load Securing: * One lashing point (5 t) in each corner * Four lashing rings (3 t each) recessed on each side into the outer frame ----Ramps: * One pair of aluminum approach ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for ramps recessed under the loading area in the chassis ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipper body, bulkhead, folding supports, and rear stanchions hot-dip galvanized * Axles, springs, air tank, flange eye and landing gear painted in black * Side panels painted in a RAL color of your choice (no special or metallic finishes); color can be changed up to approx. 6 weeks before completion ----Information: * Reinforced body with EN 12642 XL load securing certificate * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available from approx. calendar week 28 / 2026

Koşul: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline ----Braking System: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalisation unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * Multivoltage * 15-pin power connector * 12 V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED rear lights ----General Attachments: * Mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox on the right side * Two-step entry step at the front left (in driving direction) * Bolted underrun protection * Plastic quarter mudguards ----Tipper Body: * Net hooks on the sides and rear in the central locking bearing, plus 2 on the front wall * Steel pallet-3-way tipping body (continuous side walls, without centre stanchions, foldable with board wall spring assist, tailgate foldable and swinging via manual central locking) * 4 mm steel floor * Mounting rail at the rear for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side Itsdpfx Abol Thw Is Tjg ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading platform, recessed into the chassis at the rear ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipping body, front wall, folding supports and rear stanchions hot-dip galvanised * Axles, springs, air tanks, flange towing eye and landing gear painted black * Side walls painted in a custom RAL colour (no special or metallic finishes), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced body with EN 12642 XL load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available from approx. week 28 / 2026

Koşul: ikinci el, azami yük ağırlığı: 6.000 kg, toplam ağırlık: 8.800 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 05/2026, Donanım: ABS, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer * AS NEW and available * Reference number for inquiries: 11652 * RDÜ tire pressure monitoring system * EBS brake system, drum brakes, BPW axles, parabolic springs * Front support winch, rear spring-assisted square tube supports with base plate, safety lock pins for various support heights * Tow bar with 40 mm towing eye (height-adjustable mm) * 15-pin electrical connector * LED lighting * 315/80 R 22.5 tires, fully covered steel mudguards * Swiveling cable drum superstructure * Steel drum shaft with 76 mm diameter, with centering and rotating ends * 1 pair of stepped polyamide centering cones * Suitable for drums Ø 800-3,000 x (1,700 mm width between drum arms) Itedpfxoy Rb Tye Ab Tjg * With tension lock for securing the drum at the carrier arm ends, and a locking device between the cable drum superstructure and the chassis with a centrally positioned claw lock * Motor-hydraulically operated pull and push cylinders with pipe rupture protection. Control valve with automatic neutral position, pressure relief valve, and lowering throttle. Hydraulic system connectors, hoses, and pipes in NW 13. * Drum drive is motor-hydraulic with oil motor, valves, and rubber-lined drive rollers (adjustable). Hydraulic speed regulator and drum drive brake. * Also includes a hydraulic power unit: Hatz 1B30 Silent diesel engine with hand starter, 6.5 HP (150 bar), pressure supply selectable either via truck hydraulics or the power unit by swapping connection lines * Toolbox approx. 500 x 350 x 400 mm * Chassis and drawbar hot-dip galvanized * Advertising space integrated into the side guard, exterior polyester-coated in RAL white * ----as-new condition (used for only 1 project) * ---- * Financing is possible through our partners with or without down payment and final value, and with various terms. Contact us for a quote! * We are an official Müller Mitteltal dealer! * Example hire-purchase from our partner FM LeasingPartner starting from only €515/month (net) for a 72-month term (no down payment and €0 final value). * Request your quotation now! ---- * Our Opening Hours * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside these hours, appointments can be arranged as needed * We speak German, English, Russian, Polish and French ----

Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Braking System: * Drum brakes * Electronic brake system (EBS) * Emergency release device for spring-actuated cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange drawbar eye Itjdpfx Abexglibo Tjg ----Lighting / Electrics: * Tire pressure monitoring system (TPMS) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox, front right exterior on the front wall * Side underrun protection * Plastic quarter mudguards ----Lowbed Platform: * 50 mm softwood floor * Preparation in front of the front wall for subsequent installation of container locks * Bolted smooth steel front wall * Drop sidewalls made of trapezoidal profiled steel, foldable with drop-side spring assist * Steel rear wall, retractable between the ramps (storage bracket in front of the front wall when not in use) * Rear stakes bolted ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option for installing 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various drill holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, drive-on ramps, and rear wall * Drop sidewall color in RAL 9010 pure white * Custom sidewall color in any RAL shade available at extra charge ----Information: * --Reinforced and certified body to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Available from approx. CW 27/2026

Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: Itjdpfxsxglh Ro Ab Tog * Parabolic springs with compensation unit ----Drawbar / Flange Draw Eye: * Height-adjustable drawbar by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange draw eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Outward-facing hot-dip galvanized foldable support legs at the rear * Plastic toolbox front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Fold-down trapezoidal-profiled steel side walls with drop-side spring assist * Steel rear wall insertable between the ramps, holder for non-use inside in front of the bulkhead * Rear stakes bolted ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various bores in the front and rear crossmember for 1.2 t lashing options ----Ramps: * Single-piece mechanical grid ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Rear drive-on slope approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, ramps, and rear wall * Sideboard color in RAL 9010 pure white * Painting of side walls in a RAL color available at extra charge ----Information: * --Reinforced and certified body to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 27/2026

Koşul: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, return-to-ride (RtR) valve, and manual lowering for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye Itjdpfx Abevin T Sj Tsg ----Electrics / Lighting: * 15-pin 24 V connector * LED rear lights 12/24 V mounted in underride guard ----General Attachments: * Landing leg at the front * External folding supports at the rear * Plastic toolbox – approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet – 3-way tipper body made from high-strength fine-grained steel with high M-Strong sideboards and reinforced 180 bar tipping cylinder * Fixed front wall made from smooth steel sheet * Hardwood board for excavator bucket, bolted to front wall * Continuous side walls – folding, without central stanchion, with sideboard spring lifts and swinging via manual central locking * Screw-on rear stanchions * Combination steel rear swing doors – two asymmetrically split doors, swiveling and lockable up to 270°, non-folding, with additional swing frame for automatic rear door opening during tipping, locking via galvanized rotary bar and central locking system, deactivation function for automatic rear door opening when tipping backwards with open swing doors * 4 mm steel floor * Two-step access on front left * Mounting rail at rear for loading ramps ----Load Securing: * One 7-tonne lashing ring in each corner * Four 3-tonne lashing points recessed per side into the outer frame ----Loading Ramps: * Receiving chamber for loading ramps recessed in chassis at the rear * One pair of aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipper body, underrun guard, rear folding supports hot-dip galvanized * Sideboard painting in a RAL colour of choice (except for special or metallic paints), can be changed up to approx. 6 weeks prior to completion * Axles, air tanks, flange drawbar eye, and front landing leg painted in black ----Information: * -- Load securing certificate in accordance with EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Koşul: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (Electronic Braking System) * Emergency release device for spring-actuated cylinders Itodpevin Ucefx Ab Tjg * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including Run-on-Release (RtR) valve and manual lowering for loading operations ----Drawbar / Towing Eye: * Drawbar with positive-lock height adjustment * 50 mm flange towing eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12/24 V integrated into underride guard ----General Attachments: * Front support winch * External folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipper Body: * Steel platform – 3-way tipper body made of fine-grained steel with reinforced "M-Strong" high sideboards and reinforced 180 bar tipping cylinder * Fixed front bulkhead made of smooth steel sheet * Hardwood pad for excavator bucket, bolted to the front bulkhead * Continuous side walls – without center stanchion – folding, with sidewall spring assist and swaying function via manual central locking * Rear posts bolted * Combination steel swing rear doors – two-leaf, asymmetrically split, can be swung open 270° and locked in place (not fold-down), with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bar lock and central locking; deactivation function for automatic rear wall opening when tipping backwards with open swing door * 4 mm steel floor plating * Two-step entry on front left side * Mounting rail at rear for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t recessed lashing rings on each side in outer frame ----Loading Ramps: * Recessed compartment for ramps at the rear of the chassis * 1 pair of aluminum loading ramps (10 t/pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear posts, front bulkhead, tipper body, underrun protection, folding rear supports hot-dip galvanized * Sideboards painted in a RAL color of choice (no special or metallic paints); can be changed up to approx. 6 weeks prior to completion * Axles, air tanks, flange towing eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * TPMS Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axles * Parabolic leaf springs * Front support winch * Rear spring-assisted square tube supports with base plate and safety locking pin for variable support heights * Drawbar with 40 mm screw-type towing eye (height-adjustable by mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made from torsion-resistant square tubes and cross members * Closed steel mudguards with splash protection * Closed lateral underrun protection, usable as advertising surface * Plastic toolbox with base insert (installed horizontally), approx. 500 x 350 x 400 mm * Swiveling cable drum support structure, clear width between drum arms 1,700 mm – with tension latch for drum securing at the support arm ends, as well as central claw-locking mechanism for securing the drum frame to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed control and brake for drum drive * Steel drum shaft with 76 mm diameter, including centering and rotatable ends * 1 pair of polyamide centering cones, stepped design Itodpfju I Iqxjx Ab Teg * Hydraulic power pack with diesel engine * Fuel tank and hand starter * 6.5 HP engine with gear pump (150 bar) * Surface: hot-dip galvanized * New vehicle with full manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 8.800 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axles * Parabolic springs * Support winch at the front * Spring-assisted square tube support legs at the rear with base plate and safety locking pins for adjustable support heights * Drawbar with 40 mm screw-type towing eye (height adjustable in mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights Itodpju I Iqlefx Ab Teg * Chassis made of torsion-resistant square tubes and crossmembers * Enclosed steel fenders with splash protection * Enclosed side underrun protection, also suitable as advertising space * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * Swivel-mounted cable drum assembly, interior width between drum arms 1,700 mm – with tension lock for drum securing at the ends of the support arms and central claw lock for securing the cable drum assembly to the chassis * Motor-hydraulic drum drive with oil motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft, 76 mm diameter with centering and rotating ends * 1 pair of polyamide centering cones, stepwise offset * Hydraulic power pack with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Surface hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Support winch at the front * Spring-assisted square tube supports at the rear with base plate, safety locking pins for various support heights * Drawbar with 40 mm bolted towing eye (height-adjustable mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsionally stiff square tubing and cross-members * Enclosed steel mudguards with splash protection * Enclosed side underride guard, can be used as an advertising space * Plastic toolbox with floor liner (laying installation) approx. 500 x 350 x 400 mm * Swiveling cable drum construction, clear width between drum arms 1,700 mm, with tension latch for drum securing at the carrying arm ends as well as a central claw lock for connecting the cable drum frame to the chassis * Motor hydraulic drum drive with oil motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed regulator and brake for the drum drive * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 1 pair of polyamide centering cones, stepped design * Hydraulic power unit with Loncin petrol engine, includes manual and electric starter * Fuel tank and manual starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty Itjdpfx Asu I Iqreb Tsg * Subject to errors and prior sale * Immediately available from Egestorf

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS Braking System * Drum Brakes * BPW Axle * Parabolic Springs * Front Support Wind Jack * Rear Square Tube Supports with Spring Assist and Base Plate, Safety Lock Pins for Adjustable Support Heights * Drawbar with 40 mm Screw-Type Towing Eye (height-adjustable mm) * 15-pin Electrical Connector Itsdpfx Aou I Iq Ejb Tog * LED Lighting * Flashing LED Side Marker Lights * Chassis Made of Torsion-Resistant Square Tubes and Cross Members * Closed Steel Mudguards with Splash Protection * Closed Side Underrun Protection, Usable as Advertising Space * Plastic Toolbox with Bottom Insert (installed lying down) approx. 500 x 350 x 400 mm * Swiveling Cable Drum Superstructure, width between drum arms 1,700 mm – with tension lock for drum securing at support arm ends as well as a central claw lock for securing the cable drum superstructure to the chassis * Motor-Hydraulic Drum Drive with Oil Motor * Valves and Adjustable Rubber-Covered Drive Rollers * Hydraulic Speed Controller and Brake for Drum Drive * Steel Drum Shaft with 76 mm Diameter as well as Centering and Rotatable Ends * 1 Pair of Stepped Polyamide Centering Cones * Hydraulic Pump Unit with Diesel Engine * Fuel Tank and Hand Starter * 6.5 HP with Gear Pump (150 bar) * Hot-Dip Galvanized Color * New Vehicle with Full Manufacturer Warranty * Subject to errors and prior sale * Immediately available ex Egestorf * Sample images

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS Brake System * Drum Brakes * BPW Axle * Parabolic Springs * Front Support Winch * Spring-assisted square tube supports at the rear with baseplate and safety locking pins for different support heights * Drawbar with 40 mm bolt-on towing eye (height adjustable, mm) * 15-pin power connector * LED lighting Itodpfx Abju I Iqfo Teg * Flashing LED side marker lights * Chassis made of torsion-resistant square tubular steel and cross members * Enclosed steel mudguards with splash protection * Enclosed side underrun protection, suitable as advertising space * Plastic toolbox with floor insert (installed lying down), approx. 500 x 350 x 400 mm * Swiveling cable drum structure, light width between drum arms 1,700 mm, with clamp lock for securing the drum at the ends of the support arms, as well as central claw lock for fixing the cable drum structure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated friction rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, with centering and rotating ends * 1 pair of stepwise graduated centering cones made of polyamide * Hydraulic pump unit with Loncin petrol engine, including hand and electric starter * Fuel tank and hand starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * Unladen weight 2,690 kg * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Available immediately ex Egestorf * Sample images

Koşul: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11-ton BPW axles * Traction aid for shunting purposes, activated on the first axle via EBS (no truck-side installation required) * The last axle as a self-steering trailing axle with electro-pneumatic steering lock * Locking of the trailing axle for shunting purposes, controlled from the driver's cab via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function as well as Ride height control valve ----Electrical / Lighting: * Smart-Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * Removable LED rotating beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for extended length lighting * Side marker lights with indicator function * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: Isdpfx Aeykx Nkeb Tetg * Side underrun protection * Landing gears at the front and swiveling supports at the rear of the chassis * Straight sheet steel mudguards * Spare wheel holder in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection lines from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with hinged lid * 400 mm high aluminium drop and removable side walls (in RAL color of choice) on the fifth wheel platform * Rear wall —150 mm— plugged in high * Rear slope on the fifth wheel platform to the low-bed, approx. 700 mm long with checker plate covering and a perforated strip at the end for attaching aluminium drive-on ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, low bed platform with 60 mm clamped wooden floorboards * Checker plate over the axles * 9 mechanical folding wideners to 3 m overall width (excluding rear slope); widening planks available with closed transverse storage compartment underneath the load platform * Preparation for 3 insertion shafts under the fifth wheel platform to store either aluminium drive-on ramps or wooden planks for covering wheel recesses * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated external frame, 45° bent, with hole pattern for lashing devices (2 t lashing capacity per point at a minimum distance of 480 mm) * 3 x 13.4 ton lashing rings recessed to the side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low Loader Platform: * 3 x 13.4 ton lashing rings on each side of the external frame (1 x at the start of the fifth wheel step, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 ton lashing rings on each side (1 x between the front wheel recess and first axle, 1 x between 2nd and 3rd axle) * 3 x 5 ton lashing rings screwed to each side of the external frames of the wheel recesses (2 at the front, 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last

Koşul: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Maneuvering aid for shunting purposes on the first axle, activated via EBS (no truck-side installation required) * Rear axle as self-steering axle with electro-pneumatic steering lock Itjdpfjykx Nqjx Ab Teg * Steering lock for the trailing axle, operated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function and RTR valve ----Electrics / Lighting: * Smart-Board installed on the trailer as an info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for length extension lighting * Side marker lamps with indicator function * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Support winds at the front and swiveling supports at the rear on the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swivel arm as a carrier for connection cables from the truck to the semi-trailer ----Lowbed Deck: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and tool box at the front made of galvanized, powder-coated steel B = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high drop-side aluminium boards on the sides of the fifth wheel platform (in RAL color of choice), foldable and removable * Rear wall insertable, 150 mm high * Rear slope on the fifth wheel platform, approx. 700 mm long with chequer plate surface and at the end a perforated bar for hooking in aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 x mechanical fold-out extensions to 3 m total width, except on the rear slope (extension boards available with closed storage compartment crosswise under the loading area) * Preparation for 3 mounting shafts under the fifth wheel platform to store either aluminium loading ramps or wooden planks for wheel well covers * Preparation for container locks on the swan neck ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled with hole pattern for lashing points (2 t lashing force per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal beams after necking, and 1 x above the center axle next to the longitudinal beam) Lowbed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the fifth wheel platform neck, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel well and 1st axle, and 1 x between 2nd and 3rd axles) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel well (2 on the front wheel well, 1 on the rear wheel well) ----Excavator boom support: * Extended excavator boom support from the end of the last rigid axle, over the steering axle, up to the end crossmember, continuous with internal reinforceme

Koşul: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring * Emergency release device for spring-actuated cylinders * Drum brakes * 2 x 11 ton Gigant axles * Air suspension with lifting and lowering function * Fixture in front of the bulkhead and rear slant for retrofitting container locks for transporting 20" containers * Drawbar with 50 mm flange tow eye and height-adjustable drawbar * Jost landing gear at the front * External folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED lights * 21 ton GVW design with reinforced frame and reinforced axles * Reinforcement package on the chassis for drill rig transport * 50 mm softwood floor, clamped design * Fixture on the front bulkhead for optional retrofitting of container locks * Bolted smooth steel sheet front wall * Split, trapezoid-profiled steel side walls, foldable with middle drop-in stanchion * Steel rear wall, can be inserted between the ramps – storage bracket inside the bulkhead when not in use * Bolted rear stanchions Itodpfol Tihxex Ab Tsg * Perforated outer frame, approx. 45° angled, with 2 ton lashing capacity every 480 mm * Option for installing 3 ton folding lashing brackets every 600 mm * Profifix lashing rail centrally along vehicle axis for lashing up to LC 3000 daN * In each corner front and rear: 1 x 10 ton lashing ring * Lashing package with 2 x 8 ton retractable lashing rings per side in the outer frame, various drillings in the front and rear crossmember for 1.2 ton lashing options * One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (collapsible down to 20 mm) * Rear ramp angle approx. 860 mm chassis height * Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black tone * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Side wall paintwork in a RAL color of your choice (no special or metallic colors), changeable up to approx. 6 weeks before completion * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 29 / 2026

Koşul: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering system * Equipment for subsequent installation of container locks for the transport of 20" containers at the front wall and rear slope * Drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Side underrun protection Itjdpfx Abjq Dyu Uo Tsg * Plastic quarter mudguards * 15-pin power connector * LED lights * 21 t GVWR version with reinforced frame and reinforced axles * Reinforcement package on the chassis for drill rig transport * 50 mm softwood floor, clamped design * Equipment at the front wall for subsequent installation of container locks * Bolted front wall made of smooth sheet metal * Split steel side walls, trapezoidal profile, foldable with central drop-in stanchion * Steel rear wall, retractable between ramps – bracket for storage in front of the front wall when not in use * Rear stanchions bolted * Perforated outer frame, angled approx. 45 degrees, with 2 t lashing capacity every 480 mm * Preparation for installing 3 t fold-down lashing rings every 600 mm * Profifix lashing rail along the center longitudinal axis, for lashing up to LC 3000 daN * 1 x 10 t lashing ring at each front and rear corner * Lashing package with 2 x 8 t retractable lashing rings per side in the outer frame, various holes in the front and rear crossmember for 1.2 t lashing options * One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm chassis * Drawbar, front wall, tailgate, folding supports and loading ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black tone * Loading height (unladen) approx. 940 mm * (laden) approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 * Side panels painted in a RAL custom color shade (no special or metallic paint) – changeable up to approx. 6 weeks before completion * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 29 / 2026

Koşul: yeni, azami yük ağırlığı: 6.810 kg, toplam ağırlık: 9.600 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 4.030 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * EK 9.6 ----Braking system: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * SAF axle ----Suspension: * Parabolic springs ----Drawbar / Flange Eye: * Drawbar as central axle drawbar with 40 mm bolt-on drawbar eye Itjdpfx Aow Ndr Ueb Tog * Infinitely adjustable drawbar height via spindle lifting element instead of rigid drawbar ----Coupling height: * Standard coupling height approx. 900 mm (+/- 150 mm) ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED tail lights * Flashing side marker lights ----General attachments: * Support windlass at the front * Enclosed plastic mudguards * Folding underride guard for paver applications ----Chassis: * Chassis made of fine-grain steel ----Tipper body: * Pal.- 3-way tipper body * 700 mm steel front wall * Aluminum side walls, asymmetrical, continuous, without center stanchion, foldable with long travel locks and swinging via manual central locking * 800 mm high steel rear wall with automatic rear wall opening during rear tipping * 4 mm Hardox 450 steel floor ----Load securing: * On each side, 2 pairs of 3 t lashing rings, recessed and foldable in the steel floor ----Paintwork: * Chassis, drawbar, underride guard hot-dip galvanized * Tipper body painted in a RAL color of choice (no special or metallic paint), color can be changed up to approx. 6 weeks before completion ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. calendar week 42/2026

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2005, renk: siyah, Üretim yılı: 2005, Donanım: ABS, - Stepne - Çift tekerlek dingili Iodpexw T Uaofx Ab Totg

Koşul: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles Itsdeq Dyvyepfx Ab Tjg ----Suspension: * Air suspension ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12/24 V * 15-pin socket ----General Attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood flooring * Fitting for retrofitting container locks in front of the front wall * Bolted front wall made from smooth steel sheet * Side walls made from profiled sheet steel, foldable with drop-side spring assistance * Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use * Rear stakes bolted * Beveled rear drive-on angle approx. 860 mm ----Load Securing: * Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing eye at each front and rear corner * Various holes in front and rear cross-member for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps * Drop-side color in RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra charge ----Information: * -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate -- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flanged towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flanged towing eye ----Lighting / Electrics: * RDÜ (Tire Pressure Monitoring System) * LED taillights 12/24 V * 15-pin electric connector ----General Attachments: * Jost landing gear at front * External hot-dip galvanized folding support legs at rear * Plastic toolbox, front right outside on front wall * Side underrun protection * Plastic quarter mudguards ----Low-bed loading area: * 50 mm softwood floor * Preparation in front of bulkhead for later installation of container locks * Bolt-on smooth steel front wall * Side walls made of trapezoidal steel sheet, foldable, with drop side lifting device * Steel rear wall, insertable between ramp mounts; when not in use, stored inside in front of bulkhead * Bolt-on rear stanchions * Rear approach angle approx. 860 mm ----Load securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Provision for fitting 3 t lashing rings every 600 mm * In each corner at front and rear: 1 x 6.3 t lashing ring * Various drilled holes for 1.2 t lashing points in front and rear crossmembers ----Ramps: * One-piece mechanical grid ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (collapsible to 20 mm width) ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, tailgate, and ramps * Drop side color in RAL 9010 pure white * Painting of side walls in a RAL color of your choice available at extra cost ----Info: * --Reinforced and certified body according to EN 12642 XL, including load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf Itjdpopk Dv Rofx Ab Tog

Koşul: yeni, azami yük ağırlığı: 10.970 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, KA-TA-R 14,4 - Kamyon Tandem Üç Yana Devirmeli Dorse - Seride taşıma kapasitesi yakl.: 11.050 kg - 285/70R19.5 lastik ile toplam ağırlık 14,4 tona yükseltilebilir - İç ölçüler: 5.000 x 2.420 x 500 mm - Yüklü zemin yüksekliği 1.040 mm - 1 adet sıcak daldırma galvanizli şasili ve alt korumalı gövde - Boya: Akslar, yaylar ve hava tankı vb. siyah renkte - Çelik zeminde gömülü ve katlanabilir 3 çift yük sabitleme halkası, LC 3.000 daN - ABS 2 S/2 M, 24 Volt - 500 mm yüksekliğinde çelik yan kapaklar için 2 yay kaldırıcı - Sol ve sağda, bölünmemiş yan duvarlarda salınımlı 1 merkezi kilit Opsiyonel donanımlar: Itsdpfxjxmwiyj Ab Teg Çelik zemine gömülü 1 çift UVV sabitleme halkası, zeminin üstünde değil 4 mm kalınlığında Hardox 450 çelik taban Standart yerine kranklı dişli ile çekme kolu yükseklik ayarı 1 çift kenarsız alüminyum yükleme rampası (8,0 t/çift), 3.500 x 400 x 105 mm, lastikli ve paletli araçlar için uygun Alet kutusu

Koşul: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 Cable Drums (Cable Reel Mounts) ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with raise/lower control ----Drawbar: * Drawbar, 1,800 mm long, with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability on the truck dashboard via EBS signal (no installation required on the truck side) * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * "Zurr-fix" outer frame, 45° bent, with drilled hole pattern for lashing points, lashing capacity per point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg folding lashing rings at approx. 600 mm spacing – 12 pcs 3,000 kg lashing rings included per side * 5 pockets per side for stake tubes 100 x 50 mm in the outer frame – stakes themselves not included in delivery * 30 mm phenolic resin-coated plywood floor ----Cable Drum Mounts (Drum Supports): * 3 galvanized cable drum mounts secured by container locks with lateral forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with crossbar Isdpfjx Nlkaox Ab Totg * 6,000 kg drum weight per cable drum mount * Without drive system and drum brake * Support arm with clamping latch to secure drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 clamping rings * 2 centering cones made from polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided securing against drum rotation and unwinding ----Loading Height: * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in black