Kullanılmış Müller-Mitteltal Endüstriyel Treyler satın al (14.451)

Durumu: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering function * Mounting provisions for retrofitting container locks for 20" container transport, at the front bulkhead and rear slope * Drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing gear at the front * External folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED lights * 21 t GVWR version with reinforced frame and reinforced axles * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped version * Front bulkhead with provisions for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Split side walls made of trapezoidal-profiled steel sheet, foldable, with folding stake at center * Rear wall made of steel, slidable between ramps—bracket for non-use positioned inside the front bulkhead * Rear stakes bolted * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation possibility for 3 t folding lashing rings every 600 mm * Profifix lashing rail centrally along longitudinal axis for securing loads up to LC 3000 daN * In each corner, front and rear, 1 x 10 t lashing ring * Load securing package with 2 x 8 t retractable lashing rings per side in the outer frame, various holes in front and rear carrier for 1.2 t lashing capability * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 3,000 x 620 mm (collapsible to 20 mm) * Chassis ramp angle approx. 860 mm at rear * Drawbar, bulkhead, tailgate, folding supports, and access ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a shade of black Laodpfjl Tihxjx Ag Nja * Loading height unladen approx. 940 mm * Loading height laden approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Side wall color free choice up to approx. 2 weeks before production deadline, except metallic or special colors * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from calendar week 29 / 2026

Durumu: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering system * Front bulkhead and rear slope pre-equipped for retrofitting container locks for transporting 20" containers * Drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing legs at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, on the right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED lighting * Version for 21 t gross weight with reinforced frame and axles * Reinforcement package for drill rig transport on the chassis * 50 mm softwood floor, clamped version * Bulkhead pre-equipped for retrofitting container locks Lsdpfx Asq Dyu Ueg Njaa * Bolted smooth sheet metal bulkhead * Split side walls made from trapezoidal-profiled steel sheet, foldable with central folding stanchion * Steel rear wall, can be inserted between the ramps – holder for non-use installed inside at the bulkhead * Rear stanchions bolted * Perforated outer frame approx. 45 degrees bent with 2 t lashing capacity every 480 mm * Installation of 3 t recessed lashing brackets every 600 mm possible * Profifix lashing rail in the center longitudinal axis for lashing capacity up to LC 3000 daN * One 10 t lashing ring in each front and rear corner * Load securing package with two 8 t retractable lashing rings each side, various holes for 1.2 t lashing options in bulkhead and rear crossmember * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (can be nested down to 20 mm) * Rear drive-on slope approx. 860 mm at the chassis * Drawbar, bulkhead, rear flap, folding supports, and ramps galvanized * Axles, springs, air tanks, and landing legs painted in black * Loading height unladen approx. 940 mm * Loaded approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Side wall paintwork in RAL 9010 pure white * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 29 / 2026

Durumu: yeni, süspansiyon: diğer, renk: diğer, vites türü: diğer, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Compensation block for low-bed semi-trailer, incl. container locks. Price per compensation block. -- Subject to misprints, errors, and changes. Sample images --. More information at: !, More Details: ! Lodpfxoyu Uuko Ag Njaa

Durumu: kullanılmış, boş ağırlık: 9.300 kg, azami yük ağırlığı: 14.700 kg, ilk tescil: 02/2001, bir sonraki muayene (TÜV): 10/2024, toplam genişlik: 25.500 mm, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17.5 / 10mm, ön lastik ölçüsü: 235 / 75 R 17.5 / 10mm, işletme ağırlığı: 24.000 kg,

Durumu: yeni, azami yük ağırlığı: 12.200 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * TM-TA 14.4: ----Braking System: * Wabco EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Drawbar Eye: * Height-adjustable, hot-dip galvanized drawbar +/- 150 mm * 40 mm flanged drawbar eye ----Electrics / Lighting: * 15-pin power connector * LED tail lights * RDÜ tire pressure monitoring system ----General Equipment: * Jost landing gear, front * 2 x external drop-down supports at the rear * Closed-type single plastic mudguards * Foldable A-frame at the rear * Plastic underride protection buffer * Hot-dip galvanized underrun protection with integrated chain storage box, front left & right (dimensions: W = 370 mm x D = 420 mm x H = 480 mm) ----Load Securing: * Each side equipped with 2 x 5.3 t UVV lashing rings for attaching tensioning elements * Includes 2 permanently mounted ratchet tensioners with chain box on the outer frame * Equalizing chain on both sides with eye and quick-shortener, Y special version, 6.3 t ----Container Stops: * 2 relocatable container stops for lateral centring of containers * Front container stops with pendulum-type stop, can be locked in 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks, and landing gear painted in black ----Information: * Lashing capacity with load securing certificate * Subject to alterations and prior sale * New vehicle with manufacturer warranty ----Delivery time: * Available immediately ex stock Egestorf Laedpfx Agopk Dyxo Nja

Durumu: yeni, azami yük ağırlığı: 12.200 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * TM-TA 14.4: ----Braking System: * Wabco EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Eye: * Height-adjustable, hot-dip galvanized drawbar (+/-150 mm) * 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * LED tail lights * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear at the front * 2 x external drop-down support legs at the rear * Enclosed single plastic mudguards * Foldable A-panel at the rear * Plastic underrun protection buffer Ljdpfxjl Thyqj Ag Noaa * Hot-dip galvanized front underrun protection with integrated chain storage box, dimensions: W = 370 mm x D = 420 mm x H = 480 mm, front left & right ----Load Securing: * 2 x 5.3 t UVV lashing rings per side for attaching tie-down elements ----Skip Stops: * 2 removable skip stops for lateral centering of containers * Front skip stops can be plugged into 4 positions with oscillating stops ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tank, and landing gear painted in black ----Information: * Subject to errors and prior sale * New vehicle with manufacturer warranty ----Delivery Time: * Available immediately from Egestorf

Durumu: kullanılmış, boş ağırlık: 6.200 kg, azami yük ağırlığı: 23.800 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2006, süspansiyon: çelik, lastik boyutu: 235/75R17,5 141/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 141/140J, arka lastik boyutu: 235/75R17,5 141/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Lashing eyes, -- Errors, omissions, and changes excepted, sample images --, More data at: !, More details: ! Laedeyurvrspfx Ag Nsa

Durumu: kullanılmış, azami yük ağırlığı: 13.860 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2022, yükleme alanı uzunluğu: 6.770 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 600 mm, yükleme alanı hacmi: 10 m³, Donanım: ABS, ? galvanizli şasi ? alçaktan bağlı ? 50 mm çekme halkası Laodjxb Ig Sjpfx Ag Nsa ? konteyner kilidi ? her iki tarafta 12 bağlama halkası ? geri görüş kamerası ? kampana fren ? duomatic bağlantı ? ABS ? havalı süspansiyon ? alet kutusu ? EBS ? destek ayakları ? ikiz lastik ? BPW akslar Tüm bilgiler taahhütsüzdür / ara satış hakkı saklıdır.

Durumu: kullanılmış, azami yük ağırlığı: 13.860 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2022, yükleme alanı uzunluğu: 6.770 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 600 mm, yükleme alanı hacmi: 10 m³, Donanım: ABS, ? Galvanizli şasi ? Alçak bağlantı ? 50 mm çeki halkası ? Konteyner kilitleme ? Her iki tarafta 12 sabitleme halkası ? Geri görüş kamerası ? Kampana fren ? Duomatic bağlantı ? ABS ? Havalı süspansiyon ? Takım sandığı ? EBS ? Destek ayakları ? İkiz tekerlekler Laedpfexb Iglox Ag Nea ? BPW akslar Tüm bilgiler taahhütsüzdür / Ara satışa tabidir.

Durumu: kullanılmış, azami yük ağırlığı: 39.500 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 09/2010, bir sonraki muayene (TÜV): 12/2026, yükleme alanı uzunluğu: 9.345 mm, Üretim yılı: 2010, Müller Mitteltal T50 Compact Low Loader Ramps Tires: see pictures 5 axles Gigant axles Permissible total weight: 50,000 kg Unladen weight: 10,500 kg Payload: 39,500 kg Air suspension Immediately available Errors excepted We offer: Laedpfx Aeyzlyxjg Nja Net purchase for EU companies with VAT ID as well as customers from third countries. Leasing and financing options available. Full handling of all customs formalities. Issuance of temporary and export license plates. Transport to the port. All prices listed on classifieds are gross prices and already include the statutory VAT of 19%.

Durumu: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, Üretim yılı: 2016, T3 Profile 30, 0: Drum brakes, 3 x 10 ton axles, side underrun protection, swiveling support legs at the rear of the chassis frame, mechanically adjustable warning sign packages at the front and rear, folding lid for the toolbox on the turntable platform, 4 lashing rings on each side, 6 pairs of mechanical folding extensions for a total width of 3 m, widening planks stored in the center of the loading area, hydraulically operated 2-piece loading ramps laterally adjustable, loading area above the turntable: approx. 2,000 x 2,520 mm, loading height approx. 1,070 mm; rear loading area: approx. 6,500 x 2,520 / 3,000 mm, loading height approx. 910 mm (including 860 mm approach ramp), permissible gross weight technically possible: 30,000 kg, vehicle is hot-dip galvanized and as new. = Additional Information = Weights Payload: 24,000 kg gross vehicle weight: 6,000 kg Maintenance, History, and Condition Number of owners: 1 Technical condition: very good Visual condition: very good Further Information Tyre condition front: 90% Tyre condition rear: 90% Tyres front: 235/75 R 17.5 Tyres rear: 235/75 R 17.5 Cargo space dimensions (LxWxH): 8500 x 3000 x 3000 Country of manufacture: DE Further Information Please contact Bernd Strack for more information. Ljdpfx Agsyz Ix Re Nsaa

Durumu: yeni, azami yük ağırlığı: 6.810 kg, toplam ağırlık: 9.600 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 4.030 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * EK 9.6 ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brake ----Axle: * SAF axle ----Suspension: Ljdjw Ndr Uopfx Ag Njaa * Parabolic springs ----Drawbar / Flange Draw Eye: * Drawbar as central pole with 40 mm bolt-on draw eye * Infinitely adjustable drawbar height with spindle lift mechanism instead of fixed drawbar ----Coupling height: * Standard coupling height approx. 900 mm (+/- 150 mm) ----Electrics / Lighting: * Tire pressure monitoring with in-cab display via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights * Flashing side marker lights ----General attachments: * Front support winch * Closed plastic mudguards * Folding underrun protection for pavers ----Chassis: * Chassis made of fine-grain steel ----Tipping body: * Pal.- 3-way tipper body * 700 mm steel front wall * Aluminum side walls, asymmetric, continuous without center stanchion, foldable with long-bolt locks and swinging via manual central locking * Steel rear wall 800 mm high with automatic rear wall opening during tipping * 4 mm Hardox 450 steel floor ----Load securing: * 2 pairs of 3 t lashing rings per side, recessed and foldable in the steel floor ----Paintwork: * Chassis, drawbar, underrun protection hot-dip galvanized * Tipper body painted in RAL 9010 pure white ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 25/2026

Durumu: kullanılmış, azami yük ağırlığı: 7.100 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2007, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 1.100 mm, toplam genişlik: 2.550 mm, Araç / Üst yapı: Tandem üç taraflı damper İlk tescil: 07/07 Toplam ağırlık: 10.000 kg Boş ağırlık: 2.900 kg Taşıma kapasitesi: 7.100 kg Toplam uzunluk: 6.900 mm Yükleme uzunluğu: 5.000 mm Genişlik: 2.550 mm / yaklaşık yükleme genişliği 2.450 mm Yükleme yüksekliği: yaklaşık 1.100 mm Diğer bilgiler - 40 km/s - 500 mm yan paneller - 500 mm galvanizli ön ek - Yük yüzeyinde 7 çift sabitleme halkası Ljdpfxoyz H Azj Ag Neaa - Üst yapı dışında 4 çift sabitleme halkası - Destek ayağı - Arka destek - Yan panel kaldırma yayı - Opsiyonel rampalar 1.280,00 €

Durumu: kullanılmış, azami yük ağırlığı: 7.000 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/1999, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 1.100 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 10.000 kg Boş ağırlık: 2.000 kg Taşıma kapasitesi: 7.000 kg Toplam uzunluk: 6.900 mm Yükleme uzunluğu: 5.000 mm Genişlik: 2.550 mm / Yükleme genişliği yaklaşık 2.450 mm Yükseklik: yaklaşık 1.100 mm Ek bilgiler - 40 km/s - 500 mm yan kapaklar - 500 mm galvanizli ön panel uzatması Laodpfoyz H A Isx Ag Nja - Yükleme alanında 8 çift sabitleme halkası - Kasa altında dışarıda 4 çift sabitleme halkası - BPW akslar - Destek ayağı - Yan kapak kaldırma yayı - Opsiyonel çıkarma rampaları: 1.280,00 €

Durumu: kullanılmış, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2016, Donanım: ABS, Johanning’s Nutzfahrzeuge'ye hoş geldiniz, genç ve seçkin ikinci el araçlarınız için uzmanınız. HEMEN teslim! Teslimat mümkün. Fiyat istek üzerine! Finansman ve kiralama istek üzerine mümkündür. Konum: 39606 Osterburg Marka: Mueller Mitteltal Model: TA-2 / ETUE-TA-R 11,9 Yıl: 2016 Boş ağırlık: 3.250 kg TÜV: Mart / 2026 SP: Eylül 2026 Daha fazla fotoğraf veya video talep edebilirsiniz. Johanning’s Nutzfahrzeuge, seçkin ve genç ikinci el araçlarınız için partneriniz. Hizmetlerimiz – Sizin avantajlarınız (satış sonrası) – Aracınız her durumda takas alınabilir – Aracınız anında ücretsiz olarak terkin edilir – Ruhsat işlemi 150 € (ücretler ve plaka dahil) – Kısa süreli kayıt – Telefonla randevu ile her zaman inceleme ve test sürüşü mümkündür – Teslimat, anlaşmaya göre adrese kadar mümkündür. Lajdpfx Ageyxzrfj Nea Hatalar ve ara satış hakkı saklıdır.

Durumu: yeni, azami yük ağırlığı: 31.900 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11-ton Gigant axles ----Suspension: * Air suspension with lift and lower function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and stepless height adjustment ----Electrics / Lighting: * Tire pressure monitoring system with display option on truck display via EBS signal (no installation required on truck side) * SmartBoard infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED beacon (removable) at the rear ----General Attachments: * Warning board packages front and rear * 2 x toolboxes made of galvanized, powder-coated steel approx. 650 x 300 x 600 mm, mounted on the right side * Front closed single plastic mudguards * Rear straight steel mudguards, each with spray suppression * Side underrun protection ----Low Loader Platform: * Turntable platform extended by 520 mm with 45° corners and 3 recessed storage compartments incl. lockable lids * Floor on the turntable platform made of 50 mm softwood, and on the low-bed platform of 60 mm softwood * 20 mm rubber mat instead of wooden flooring in the running area with a low-bed length of 6,780 mm including the drive-up slope * Rubber mat on the drive-up slope left and right, approx. 860 mm long * Each side with 4 stake pockets (no stakes supplied), simultaneously offering 2-ton lashing capability ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lasi Package): Turntable Platform: * 2 pairs of 13.4-ton lashing eyes on the perimeter frame of the turntable platform Low-bed Area: * Each side with 4 pairs of 10-ton lashing rings on the perimeter frame, retractable and loadable in all directions * Each side at the rear with 2 pairs of 13.4-ton swiveling lashing rings ----Ramps: * Rubber coating on the foldable drive-on ramps * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp adjustment & load-holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outrigger beams for a total width of 3 meters (not in the rear slope) * Widening planks stored on the left side in a compartment ----Excavator Arm Rest: * Excavator arm rest above the rear axle up to the end of the drive-up slope, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4-ton lashing rings on the sides of the excavator arm rest ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck from over 40 up to max. 120 l/min) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (including 860 mm drive-up slope) * Loading area above turntable: approx. 2,990 x 2,520 mm ----Loading Height: Laodpfxeylfvms Ag Nea * Loaded: approx. 890 mm, +/- 20 mm ----Paint/Finish: * Reflective contour tape on sides and rear * Chassis, turntable, drive-on ramps, and folding beams hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain optional equipment ----Delivery Time: * Vehicle available approx. from week 23/2026

Durumu: yeni, azami yük ağırlığı: 31.900 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height setting ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required * SmartBoard as infotool with pressure sensors for axle load indication per axle group * 15-pin electrical connector * LED rear lights * LED beacon (removable) at the rear Lodpfx Agsylfvge Neaa ----General attachments: * Warning sign packages front & rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, mounted right side * Front closed plastic single mudguards * Rear straight steel mud aprons each with spray protection (spray mist suppression) * Side underrun protection ----Low-loader platform: * Turntable platform extended by 520 mm with 45° corners and 3 recessed storage compartments including covers, lockable * Floor on turntable platform made of 50 mm and on low-loading platform of 60 mm softwood * 20 mm rubber overlay instead of wooden floor in trackway area, with a low-bed length of 6,780 mm including approach ramp * Rubber overlay on the approach ramp left and right, approx. 860 mm long * Each side with 4 pocket stakes (no stakes included) with simultaneous 2-ton lashing capacity each ----Chassis: * Chassis made of high-strength fine grain steel ----Load securing (Lasi package): Turntable platform: * 2 pairs of 13.4 ton lashing eyes in the outer frame of the turntable platform Low-bed: * Each side with 4 pairs of 10 ton drop-down lashing rings on the outer frame, loadable in all directions * Rear sides each with 2 pairs of 13.4 ton swing-out lashing rings ----Ramps: * Rubber overlay on folding loading ramps * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shift & load holding valves ----Rear support: * Hydraulic rear support ----Wideners: * 8 pairs of galvanized folding outriggers for 3 meters overall width (not included on the rear slope) * Widening planks stored in a compartment left side ----Digger stick recess: * Digger stick recess over the rear axle up to the end of approach ramp, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 ton lashing rings in the digger stick recess on each side ----Hydraulics: * Hydraulic flow divider in the trailer (with truck hydraulic pump output over 40 – max. 120 l/min) ----Loading dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm approach ramp) * Loading area above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape, sides and rear * Chassis, turntable, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images may include special equipment ----Delivery time: * Vehicle is expected to be available from week 23/2026

Durumu: yeni, Üretim yılı: 2026, New model, now with 9,900 kg gross vehicle weight! Lodeyyhb Nepfx Ag Nsaa Cable drum transport trailer. Permissible gross weight: 9,900 kg, payload approx. 7,000 kg (standard equipment). Hydraulic lifting and lowering of the cable drum from the towing vehicle or via separate engine (4-stroke petrol, 8.1 kW, electric start) with weather protection cover, hydraulically driven drum with rubber-coated drive rollers, drum diameter 800–3,000 mm, drum width up to approx. 1,650 mm, centring cones for cable drums. Dual-speed support winch at the front, extendable rear support. BPW axle, EBS, parabolic suspension, tyres 315-80R22.5, tyre pressure monitoring. Height-adjustable 40 mm towing eye, 2-line air, LED lighting 12+24 V. Toolbox, advertising panels integrated into the side underrun protection. Fully hot-dip galvanized vehicle. New vehicle including factory warranty. Available from approx. week 26, 2026. (Archive photos) = Further information = Unladen weight: 2,900 kg Payload: 7,000 kg Gross vehicle weight: 9,900 kg Front tyres: 315-80R22.5 Country of manufacture: DE Please contact Jan-Marc Schwickert for further information.

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2018, Donanım: ABS, = Additional Options and Equipment = - EBS - Electronic Braking System - Rear air suspension - Front air suspension Lsdpfx Aeyxklujg Neaa = Notes = For inquiries about the vehicle, Mr. Seidel will be happy to assist you (by phone). Müller-Mitteltal TS 3 PROFI 30.0 Machine Transporter Additional rear work lights, side left and right, BPW axles, Wabco ABS, drum brakes, spring reservoirs, 3rd axle steered, hydraulic loading ramp, extendable rear stakes to the side, sliding roof, side sliding tarpaulin, loading bay dimensions: Rear to neck: L 9,230 mm W 2,490 mm H 3,020 mm; neck to front wall: L 4,000 mm H 2,470 mm; tyre tread: 1st axle 7-11 mm, 2nd axle 9-10 mm, 3rd axle 8-10 mm. On request, we will provide you with a leasing or financing offer. Mr. Seidel (phone) will be happy to assist you. Further information is available on our homepage. ... Subject to errors, changes, and prior sale!!! Steering axle = Additional Information = Unladen weight: 11,100 kg Payload: 24,900 kg gvw: 36,000 kg Cargo space dimensions (LxWxH): 9230x2490x3020 Please contact Tobias Ebert for further information.

Durumu: kullanılmış, azami yük ağırlığı: 19.800 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2019, Donanım: ABS, * Müller Mitteltal 3 dingilli konteyner taşıma römorku * Tip TM 2 24 * 7 ila 10 m³ arası iki konteyner için Laedjyx R Enepfx Ag Noa * Yük emniyeti her bir konteyner için yalnızca iki zincir ile sağlanır * Çift teker 265/70 R19,5 * Havalı süspansiyon * BPW dingiller * Dönel şasi çeki oku; pnömatik olarak alçaltılabilir ve pnömatik kilit açma mekanizmalıdır * Gergi elemanları takılması için 8 adet 5 ton UVV bağlama halkası * Konteynerlerin yandan merkezlenmesi için 8 adet değiştirilebilir konteyner durdurucu * EBS * Teknik olarak izin verilen toplam ağırlık 27.000 kg

Durumu: kullanılmış, boş ağırlık: 8.800 kg, azami yük ağırlığı: 31.200 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/1996, yükleme alanı uzunluğu: 10.000 mm, yükleme alanı genişliği: 2.510 mm, yükleme alanı yüksekliği: 1 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: kırmızı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Araç lokasyonu: Bovenden, 4 akslı, döner tabla, yaprak süspansiyon, 3 metreye kadar genişletilebilir, bağlama halkaları, 2 parçalı rampalar, hidrolik rampalar, arka destek, yan alüminyum yan koruma, çift tekerlek, depolama kutusu. Üst yapı: Hidrolik 2 parçalı rampa ile donatılmış 4 akslı alçak yükleyici dorse. Yükseklik yaklaşık 900 mm. 4x 10 ton SAF aks, kampanalı frenler, 40'lık ve 50'lik çeki halkası! Lodpfxjywvhrj Ag Noaa Üst platform uzunluğu yaklaşık 2900 mm! Alt platform uzunluğu yaklaşık 7100 mm! EKİPMAN BİLGİLERİ GARANTİSİZ VERİLMİŞTİR, değişiklik, ara satış ve yazım hataları saklıdır!

Durumu: kullanılmış, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2002, Kasa-Damper dorse kombinasyonu. Azami toplam ağırlık 10.500 kg, taşıma kapasitesi 7.550 kg. 3 yönlü damper üst yapı, yaklaşık 5.000 x 2.420 x 400 mm (iç ölçüler), 4 adet yük bağlama halkası, merkezi kilitlemeli salınan ve katlanabilir çelik yan paneller. Damperin altında kilitlenebilir bölmelerde 1 çift alüminyum rampalar. Yüksüz yükleme yüksekliği yaklaşık 900 mm. Ön tarafta iki vitesli destek ayağı, arka tarafta katlanabilir destekler. 40 mm çeki oku, yüksekliği kademesiz ayarlanabilir çekme borusu. 2 hat havalı, 1 hat hidrolik, 24 volt. BPW akslar, parabollü süspansiyon, ABS. Lastik: 235-75R17.5. Şasi gri, damper köprüsü yeşil. Muayene Haziran 2026’ya kadar geçerli. Mevcut haliyle satılır. Alüminyum rampalar = Ek Bilgiler = Boş ağırlık: 2.950 kg Taşıma kapasitesi: 7.550 kg Azami toplam ağırlık: 10.500 kg Laodpfxoyw Hw Re Ag Nsa Ön lastik: 235-75R17.5 Arka lastik: 235-75R17.5 Üretim ülkesi: DE Daha fazla bilgi için lütfen Jan-Marc Schwickert ile iletişime geçiniz.

Durumu: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, * TRA-Kombi 18.0: * 3-in-1 = suitable for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, length 2,100 mm * 40 mm drawbar eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System), indication available in the truck via EBS signal (no truck-side installation required) Lajdjl Thwcspfx Ag Nea ----General Attachments: * Toolbox made of powder-coated steel sheet, mounted right-hand side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets, made of galvanized sheet metal, approx. 960 x 300 x 400/450 mm, right-hand side * Rear plastic impact protection buffer * Mechanical drop-down rear supports ----Loading Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel floor with rolling recesses in the bogie area * When transporting roll-off containers, container lengths from 5,500 to 7,000 mm are possible * Pneumatic 4-point clamping lock and mechanical plug-in front stops in the rail, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 movable skip stoppers for lateral centering of the skips, the front 4 stoppers are removable and feature pivotable stops * Weld bead as anti-slip coating in the ramp approach area ----Load Securing: * 3 pairs of 10 t UVV rated lashing rings on the sides for attaching tensioning devices for positive and friction-locked securing of skips * 4 lashing brackets in cloverleaf design (per side) * 1 pair of 13.4 t UVV rated lashing rings at the front ----Ramps: * 1 pair of aluminium approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Additional Information: * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Technically permissible gross weight of 20,000 kg * New vehicle with manufacturer’s warranty * Errors and subject to prior sale ----Delivery time: * Available immediately from Egestorf

Durumu: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including RtR valve and manual lowering function for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin, 24 V connector * LED tail lights 12 / 24 V integrated into rear underrun protection ----General Attachments: * Front support winch * Externally mounted folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipping Platform: * Steel pallet - 3-way tipper body made from high-tensile steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed bulkhead made from smooth steel sheet * Hardwood pad for excavator bucket, bolted to the bulkhead * Continuous side walls – without central stanchion – foldable with sideboard spring lifter, also swinging via manual central locking * Rear stanchions bolted * Combined steel double-wing rear doors, asymmetrically split, swiveling up to 270° and lockable, not foldable, fitted with additional swinging frame for automatic tailgate opening during tipping, locking via galvanized rotary bar fastener and central locking. Deactivation function for automatic tailgate opening when tipping backwards with door open * 4 mm steel floor plate * Two-step access on front left * Rear mounting rail for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t lashing eyes per side, recessed into the outer frame ----Loading Ramps: * Rear mounting compartment for loading ramps integrated into the chassis Lsdpfx Ajvin Ucog Njaa * 1 pair of aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, bulkhead, tipper platform, underrun protection, rear folding supports hot-dip galvanized * Side walls - KTL-coated - and tailgate painted in RAL 9010 pure white * Side walls can be painted in any RAL colour for an additional charge * Axles, air tanks, flange drawbar eye, front support winch painted black ----Information: * --Load securing certificate according to EN 12642 XL? * Errors and interim sale reserved * Sample images (actual vehicle photos may vary due to special equipment) ----Delivery time: * Available from week 15 / 2026

Durumu: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, * TRA-Kombi 18.0: * 3 in 1 = Suitable for hooklift containers, skip loaders, and as a low loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs Lodel Thv Rspfx Ag Neaa ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye with height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin electric plug * RDÜ (Tire Pressure Monitoring) with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Tool box made of powder-coated steel sheet, mounted on the right side * Side underrun protection * Plastic quarter mudguards with splash guards * Storage box for container nets made of galvanized sheet approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic bump stops * Mechanical rear drop supports ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll-off containers * Steel floor with roller recesses in the bogie area * For hooklift container transport, container lengths of 5,500 - 7,000 mm possible * Pneumatic 4-point clamp locking and mechanical plug-in stop brackets at the front in the rail, load securing certificate to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops with oscillating stops * Weld bead as anti-slip coating in the ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning elements for positive and non-positive securing of skips * 4 lashing cleats in cloverleaf design (on the side) * 1 pair of 13.4 t UVV lashing rings towards the front ----Ramps: * 1 pair of aluminium approach ramps (10.6 t per pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at the rear) ----Information: * Load securing certificates as per DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible total weight up to 20,000 kg (technically possible) * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf