Kullanılmış Müller-Mitteltal Ka-Ta- R 18,0 Tandem 3 Seitenkipper Nl 13.500Kg satın al (64.050)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking System:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizer unit
----Drawbar / Flange Tow Eye:
* Drawbar height-adjustable by 300 mm
* Drawbar extension by 250 mm up to 2,250 mm
* 40 mm flange tow eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin power connector
* LED lighting
----General Attachments:
* Landing gear at the front
* Fold-out stabilizer legs at the rear
Njdpfxev Eq Evs Aldolc
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside at the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* At the front bulkhead and rear incline, provision for retrofitting container locks for transporting 20'' containers
* Bolted bulkhead made of smooth sheet metal
* Drop-side walls made of trapezoidal steel sheet, central split, folding
* Steel rear wall - insertable between the ramp mounts, can be stowed inside at the front bulkhead when not in use
* Rear stakes bolted
----Load Securing:
* Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm
* Option for installation of 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each corner, front and rear
* Various holes in the front and end cross-members for 1.2 t lashing options
* Profifix lashing rail, centrally along longitudinal axis, for securing up to LC 3000 daN
----Ramps:
* One-piece mechanical mesh ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be closed to 20 mm)
* Rear approach angle, approx. 860 mm chassis
----Wheelbase:
* Wheelbase 1,140
----Paintwork:
* Drawbar, bulkhead, rear flap, folding legs, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange tow eye and landing gear painted black
* Side walls painted to RAL color of choice (excluding special or metallic colors), changeable up to approx. 6 weeks before completion
----Information:
* Reinforced and certified body according to EN 12642 XL including load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 30 / 2026
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL18 to. Tand.-Stahl - Strong -3 Seiten mit Rampen
Ara
Durum: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0:
----Braking System:
* EBS (Electronic Braking System)
* Emergency release device for spring-actuated cylinders
* Drum brakes
----Suspension:
* Air suspension with lifting and lowering system, including Run-on-Release (RtR) valve and manual lowering for loading operations
----Drawbar / Towing Eye:
* Drawbar with positive-lock height adjustment
* 50 mm flange towing eye
----Electrics / Lighting:
* 15-pin 24 V connector
* LED tail lights 12/24 V integrated into underride guard
----General Attachments:
* Front support winch
* External folding supports at the rear
* Plastic tool box approx. 750 x 350 x 300 mm, mounted on the right side
* Plastic quarter mudguards
----Tipper Body:
* Steel platform – 3-way tipper body made of fine-grained steel with reinforced "M-Strong" high sideboards and reinforced 180 bar tipping cylinder
* Fixed front bulkhead made of smooth steel sheet
* Hardwood pad for excavator bucket, bolted to the front bulkhead
* Continuous side walls – without center stanchion – folding, with sidewall spring assist and swaying function via manual central locking
* Rear posts bolted
* Combination steel swing rear doors – two-leaf, asymmetrically split, can be swung open 270° and locked in place (not fold-down), with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bar lock and central locking; deactivation function for automatic rear wall opening when tipping backwards with open swing door
* 4 mm steel floor plating
* Two-step entry on front left side
* Mounting rail at rear for loading ramps
Nlodsvin Ucjpfx Aldoc
----Load Securing:
* 1 x 7 t lashing ring in each corner
* 4 x 3 t recessed lashing rings on each side in outer frame
----Loading Ramps:
* Recessed compartment for ramps at the rear of the chassis
* 1 pair of aluminum loading ramps (10 t/pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles
----Paintwork:
* Chassis, drawbar, rear posts, front bulkhead, tipper body, underrun protection, folding rear supports hot-dip galvanized
* Sideboards painted in a RAL color of choice (no special or metallic paints); can be changed up to approx. 6 weeks prior to completion
* Axles, air tanks, flange towing eye, and front support winch painted in black
----Info:
* --Load securing certificate according to EN 12642 XL?
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 45 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL18 to. Tand.-Stahl - Strong -3 Seiten mit Rampen
Ara
Durum: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0:
----Brakes:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded brake cylinders
* Drum brakes
----Suspension:
* Air suspension with lifting and lowering system, return-to-ride (RtR) valve, and manual lowering for loading operations
----Drawbar / Flange Drawbar Eye:
* Drawbar with positive-locking height adjustment
* 50 mm flange drawbar eye
----Electrics / Lighting:
Nlodpfx Alovin T Sedoc
* 15-pin 24 V connector
* LED rear lights 12/24 V mounted in underride guard
----General Attachments:
* Landing leg at the front
* External folding supports at the rear
* Plastic toolbox – approx. 750 x 350 x 300 mm, mounted on the right side
* Plastic quarter mudguards
----Tipping Body:
* Steel pallet – 3-way tipper body made from high-strength fine-grained steel with high M-Strong sideboards and reinforced 180 bar tipping cylinder
* Fixed front wall made from smooth steel sheet
* Hardwood board for excavator bucket, bolted to front wall
* Continuous side walls – folding, without central stanchion, with sideboard spring lifts and swinging via manual central locking
* Screw-on rear stanchions
* Combination steel rear swing doors – two asymmetrically split doors, swiveling and lockable up to 270°, non-folding, with additional swing frame for automatic rear door opening during tipping, locking via galvanized rotary bar and central locking system, deactivation function for automatic rear door opening when tipping backwards with open swing doors
* 4 mm steel floor
* Two-step access on front left
* Mounting rail at rear for loading ramps
----Load Securing:
* One 7-tonne lashing ring in each corner
* Four 3-tonne lashing points recessed per side into the outer frame
----Loading Ramps:
* Receiving chamber for loading ramps recessed in chassis at the rear
* One pair of aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles
----Paintwork:
* Chassis, drawbar, rear stanchions, front wall, tipper body, underrun guard, rear folding supports hot-dip galvanized
* Sideboard painting in a RAL colour of choice (except for special or metallic paints), can be changed up to approx. 6 weeks prior to completion
* Axles, air tanks, flange drawbar eye, and front landing leg painted in black
----Information:
* -- Load securing certificate in accordance with EN 12642 XL?
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 45 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALTandem Tieflader- Tiefbett, 5,5 m - durchfahrbar
Ara
Durum: yeni, azami yük ağırlığı: 9.070 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.010 mm, yükleme alanı yüksekliği: 325 mm, Üretim yılı: 2026, * ETS-TA-B 11,9:
* Wabco EBS (elektronik fren sistemi)
* RDÜ (lasti̇k basinci izleme)
* Kampanalı frenler, 2 x 5,5 ton Gigant dingil
Nlsdpfjwyhzvjx Aldjc
* Parabol yaylar, dengeleyici ünite ile
* Yaklaşık 300 mm yükseklik ayarlı çekme kolu
* BPW destek makarası
* Arkada mekanik düşey destekler
* Ön sağda ön panelde plastik alet kutusu
* Yan koruma çubuğu
* LED aydınlatma
* 50 mm iğne yapraklı ahşap zemin
* Ön panel ve arka travers köşelerinde 1 x 6,3 ton bağlama halkası, dış şasede yanlarda 2’şer 6,3 ton UVV bağlama halkası
* Tek parça, yay mekanizmalı, tek operatörlü çelik ızgara tip rampa, yaklaşık 2.350 x 870 mm (iç mesafe 20 mm, rampalar kaydırılamaz)
* Ön panel, yan paneller, çamurluklar ve çekme kolu sıcak daldırma galvanizli
* Dingiller, yaylar, hava tankı, ön destek makarası siyah tonlarda boyalı
* Yeni araç, tam üretici garantili
* Hatalar ve ara satış hakkı saklıdır
* Yaklaşık 35. hafta / 2026 teslim
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release device for spring brake cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange towing eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding support legs at the rear
* Plastic toolbox installed on the right front exterior of the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood flooring
* Prepared fixture in front of the bulkhead for later installation of container locks
* Bolt-on bulkhead made from flat sheet steel
* Drop-down side panels made from trapezoidal steel sheets with sideboard spring assist
* Steel rear panel can be inserted between ramps – storage holder provided inside the bulkhead when not in use
* Rear stanchions bolted
----Load securing:
* Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashings every 600 mm
* In the corners (front and rear), each fitted with 1 x 6.3 t lashing ring
* Various drill holes in the bulkhead and end cross member for additional lashing points at 1.2 t
----Ramps:
* One-piece mechanical mesh ramps with spring assist for one-person operation, approx. 2,750 x 600 mm (can be retracted to 20 mm thickness)
* Rear approach angle approx. 860 mm
----Painting:
* Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear panel
* Side panel color in RAL 9010 pure white
* Side panel painting in another RAL color available at extra cost
----Information:
* --Reinforced and certified bodywork according to EN 12642 XL incl. load securing certificate--
Nljdpfx Alsxglibjdjc
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
----Delivery time:
* Available from approx. CW 30/2026
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTAL14,4 to. Tandem Absetzcont.-Anh., Sonderpreis
Ara
Durum: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4:
----Brakes:
* Wabco ABS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizing unit
----Tow Bar / Flange Drawbar Eye:
* Height-adjustable tow bar (+/- 150 mm)
* 40 mm bolted drawbar eye
----General Attachments:
* Jost landing gear at the front
* Side underrun protection
* Foldable rear A-plate
----Electrics / Lighting:
* 15-pin electrical connector
* Multi-chamber tail lights
----Body:
* Fixed steel front and side walls
* Removable steel rear wall
* Floor made of 50 mm softwood
* 1 sliding sheet metal plate 750 x 1,000 mm at the front, including 2 removable trough stops at the front, insertable in 2 positions
* Rear traverse for mounting aluminum loading ramps, including 2 additional rear drop stands
----Loading Edge:
Nsdpfx Ael Th Dmoldelc
* Unladen loading height approx. 710 mm
----Load Securing:
* 4 repositionable trough stops, insertable in 2 positions for lateral centering of the troughs
* On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices
* 2 ratchet tensioners (spindle adjustment) with compensating chain and quick shortener (tensioning force 6,300 kg)
----Tyres:
* Tyres: 285/70R19.5
----Wheelbase:
* Wheelbase: 1,140 mm
----Paintwork:
* Chassis, front wall, side walls, mudguards, tow bar, and rear drop stands hot-dip galvanized
* Axles, springs, landing gear, and air tanks painted in black
----General Information:
* Vehicle has a one-day registration in 06/2024 due to missing tire pressure monitoring system, and has not been loaded or used
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf on the A7
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranhänger
Ara
Durum: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* Duomatic brake coupling
----Axle:
* 2 x ton SAF axles
* 1st axle as lift axle (fully automatic)
Nlsdpfx Asx Dp Ateldec
* Lift axle with ride height +30 mm via actuator cylinder
* Start-up assist for manoeuvring and forced lowering to the first axle – controlled via speed-dependent EBS electronics – (no truck-side installation required, includes cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering function via remote control
----Drawbar / Flange Towing Eye:
* 50 mm flanged towing eye – height-adjustable by +77 mm and -33 mm – for 2 t vertical load
----Electrics / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary socket
* LED lighting system 12 / 24V
* 2 LED reversing lights, activated via reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* Extended connection cables for agricultural and forestry vehicles
* Radio remote power supply 12+24 V via tail light
----General Attachments:
* BPW landing gear front
* Mechanically extendable underrun protection for container lengths over 6,000 mm
* Speedline diamond-finish aluminium rims
* Drop-in-pin towing coupling (use only when underrun protection is retracted)
* Enclosed plastic half-shell individual mudguards
* Two-step access in front of the bulkhead, left side
* Shovel and broom holder in front of the bulkhead
* 2 stainless steel toolboxes – matt finish – approx. 650 x 350 x 320 mm, right-hand side
* Enclosed side underrun protection can be used as advertising space
----Hydraulics:
* 2-circuit hydraulic connections (engine-side from truck/tractor) rated for 180 bar (tractor operation)
* Double-acting control circuit for hydraulic tailgate (mounted right-hand side front) with operation via remote control
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023)
* Base frame made of high-tensile fine-grain steel
* 20,000 kg pulling force
* Hook height 1,570 mm
* Control of the hooklift device via remote control
* Remote control with fast function when unloading but not when loading
* Emergency stop buttons on both left and right sides
* Container saddle with 4 supports per side and 1 roller at the rear per side
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to assist with main arm lifting
* 2 x mechanical drop-down supports at the rear
* Approved for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load
* Note: If the remote control is outside the charging cradle, the service brake must be applied to enable wireless release. The brake connections must remain coupled in order to operate the hydraulically/pneumatically controlled valves.
* Monitoring system for underrun protection to ensure it is retracted when tipping
----Loading Height:
* Unladen approx. 1,300 mm with lowered lift axle
----Paintwork:
* Chassis, drawbar, step, underrun protection and drop supports hot-dip galvanized
* Axles, air tanks, front landing gear painted in black
* Palfinger hooklift painted black/yellow
----Information:
* Subject to errors and prior sale
* Vehicle is in very good / as-new condition
----Delivery Time:
* Vehicle is available immediately
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to Tand. 3-Seitenkp./ Kombiklappe/ Rampen
Ara
Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline"
----Braking System:
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizing unit
----Drawbar / Flange Eye:
* Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye
----General Accessories:
* Jost mechanical support winch at the front
* 2 mechanical, hot-dip galvanized folding supports at the rear
* Plastic tool box, approx. 750 x 350 x 300 mm, mounted laterally on the right
* Bolted underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* 15-pin power connector
* LED lighting
* TPMS (Tire Pressure Monitoring System)
----Tipper Body:
* Mesh hooks on the side and rear at the central locking mounts, plus 2 on the front wall
* Three-way steel pallet tipper body (continuous side walls – no center stanchions – can be folded down with board wall spring lifter)
* Rear stanchions bolted
* Combo steel wing doors, rear, 2-leaf, asymmetrically split, can pivot and lock up to 270°, not foldable, plus with additional swinging frame for automatic rear flap opening during tipping; locking via galvanized turn bar lock and central locking system
* Deactivation function for automatic rear flap operation when tipping in reverse with the wing door open
* 4 mm steel floor plate
* Rear mounting rail for loading ramps
----Load Securing:
* 1 x 5 t lashing ring in each corner
* 4 x 3 t lashing rings recessed into the outer frame on each side
----Ramps:
* 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment accessible from the rear, recessed under the loading area in the chassis
----Paintwork:
Njdol Thyxspfx Aldjlc
* Drawbar, front wall, tipper bed, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized
* Side walls and tailgate painted in RAL 9010 pure white
* Painting of side walls in a different RAL color available at extra charge
* Axles, springs, flange eye, air tanks, and support winch painted black
----Information:
* Reinforced superstructure with load securing certificate according to EN 12642 XL
* New vehicle, unregistered, with manufacturer’s warranty
* Subject to prior sale and errors
----Delivery Time:
* Available immediately ex Egestorf on the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Absetzcont.-Anh., Sonderpreis
Ara
Durum: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4:
----Braking System:
* Wabco ABS braking system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalization unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar (+/- 150 mm)
* 40 mm bolted towing eye
----General Attachments:
* Jost landing gear at the front
* Side underrun protection
* Foldable rear A-shield
----Electrics / Lighting:
* 15-pin power connector
* Multi-chamber tail lights
Nlodel Th Eyepfx Aldsc
----Body:
* Fixed steel front and side walls
* Removable steel rear wall
* Floor made from 50 mm softwood
* 1 sliding plate 750 x 1,000 mm positioned at the front, incl. 2 moveable trough stops at the front (plug-in, 2 positions each)
* Rear crossmember suitable for use with aluminum approach ramps, incl. 2 additional drop-down supports at the rear
----Loading Edge:
* Unladen loading edge approx. 710 mm
----Load Securing:
* 4 repositionable trough stops, can be plugged into 2 positions for lateral centering of the troughs
* On each side: 1 x (13.5 t) UVV tie-down point for attaching tensioning devices
* 2 ratchet tensioners (spindle adjustment) with equalizing chain and quick-shortener (tensioning force 6,300 kg)
----Tyres:
* Tyres: 285/70R19.5
----Wheelbase:
* Wheelbase: 1,140 mm
----Paintwork:
* Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized
* Axles, springs, landing gear, and air reservoir painted in black
----General Information:
* The vehicle has a day registration from 06/2024, has not been in use or loaded due to the absence of a tire pressure monitoring system
* Subject to prior sale and errors excepted
----Delivery Time:
* Available immediately ex Egestorf on the A7
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Ara
Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum mounts
----Braking System:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with lift and lowering system
----Drawbar:
* Drawbar, 1,800 mm long, with 40 mm towing eye
----Electrical / Lighting:
* Tyre pressure monitoring with display option in the truck dashboard via EBS signal (no installation required on truck side)
* 15-pin electrical connector
* 2 additional LED reversing lights (activated by reverse gear)
* LED lighting
----General Fittings:
* Aluminium air tank
Njdpfx Alsx Nli Njdolc
* Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm
* Side underrun protection
* Plastic quarter mudguards
* Rear underrun protection
----Platform:
* Zurr-fix outer frame, 45° angled with perforation pattern for load securing devices, lashing capacity per tie-down point 2,000 kg at a spacing of 480 mm
* Option to install 3,000 kg drop-in lashing brackets at approx. 600 mm intervals – delivery includes 12 pieces of 3,000 kg lashing brackets per side
* 5 pockets per side for pipe stakes, 100 x 50 mm, integrated in the outer frame (stakes not included in delivery)
* 30 mm phenolic plywood floor
----Cable Drum Mounts:
* 3 galvanized cable drum mounts, secured by container lockings with side forklift pockets, center-to-center 800 mm (pocket width 185 mm)
* Max. drum diameter 2,600 mm and drum width max. 1,650 mm
* Clear width between support arms approx. 1,775 mm, with cross connection
* Max. drum weight per mount: 6,000 kg
* Without drive and drum brake
* Support arm with tension latch for drum shaft securing
* Steel drum shaft, 76 mm diameter with centering and rotatable ends
* 2 spacer rings
* 2 polyamide centering cones
* 4 pieces of 3.2 t lashing eyes on support arms for customer’s own securing of the drum against rotation and unspooling
----Loading Height:
* Loaded approx. 1,040 mm
----Paintwork:
* Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized
* Axles painted in a black tone
----Info:
* Technical uprating to 30 t GVW possible
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from week 51 / 2026
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranhänger
Ara
Durum: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E brake system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* Duomatic brake connection
----Axle:
* 2 x SAF axles, rated at required tonnage
* First axle configured as a lift axle (fully automatic)
* Lift axle with ride height +30 mm via control cylinder
* Start-assist function for maneuvering and forced lowering to the first axle — switchable via speed-dependent EBS electronic system (no installation required on the truck side, with additional cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering via radio remote control
----Drawbar / Flange Towing Eye:
* 50 mm bolted flange towing eye — height-adjustable by +77 mm and -33 mm — for 2 t support load
----Electric / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary connector
* LED lighting system 12 / 24V
* 2 LED reversing lights, actuated via reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems
* Extended connection cables for agricultural and forestry vehicles
* Wireless power supply 12V + 24V via tail light circuit
----General Attachments:
* BPW support winch at the front
* Mechanically extendable underride guard for container lengths over 6,000 mm
* Speedline diamond-finish aluminum rims
* Detachable pin-type towing coupling (use only with retracted underride guard)
* Enclosed plastic half-shell single mudguards
* Two-step access ladder in front of the bulkhead, left side (direction of travel)
* Shovel and broom holder in front of the bulkhead
* 2 matte stainless steel toolboxes approx. 650 x 350 x 320 mm, mounted laterally on the right
* Enclosed side impact protection, usable as advertising space
----Hydraulics:
Nlsdpfx Asx Dp Agsldsc
* Dual-circuit hydraulic connections (engine side from truck/tractor), rated for 180 bar (tractor operation)
* Double-acting control circuit for hydraulic tailgate (mounted right, direction of travel) with remote control operation
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift device (serial no. 100746129, year 2023)
* Main frame constructed from high-strength fine-grain steel
* 20,000 kg lifting capacity
* Hook height 1,570 mm
* Hooklift operation controlled by radio remote
* Remote with fast function for unloading, but not for loading
* Emergency stop switches on both left and right sides
* Container supports: 4 lateral supports per side and 1 rear roller each side
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to assist main arm lifting
* 2 mechanical drop supports at the rear
* Approval for 20 tonnes gross vehicle weight (2 x 9 t axles) and 2 t support load
* Note: If the remote control is removed from its charging station, the service brake must be applied to enable radio operation. Brake connections must remain connected at all times to allow electro-hydraulic/pneumatic valves to open
* Monitoring system for underride guard to ensure it is retracted when tipping
----Loading Height:
* Unladen approx. 1,300 mm with lift axle lowered
----Paintwork:
* Chassis, drawbar, step, underride protection, and support legs hot-dip galvanized
* Axles, air tank, and front support winch painted in black
* Palfinger hooklift painted in black / yellow
----Information:
* Subject to errors and prior sale
* Vehicle is in very good / as-new condition
----Delivery Time:
* Vehicle is available immediately
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking system:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange drawbar eye:
* Drawbar adjustable in height by approx. 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* 40 mm flange drawbar eye
----Lighting / Electrics:
* TPMS (Tyre Pressure Monitoring System)
* LED lighting
----General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox on the front right outside of the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood floor
* Preparation in front of the front wall for subsequent installation of container locks
* Bolted front wall made of smooth sheet metal
* Drop sides made of trapezoidal sheet steel, foldable with side board spring lifter
* Rear wall made of steel, slidable between the ramps – storage bracket inside front wall when not in use
* Removable rear stanchions (bolted)
----Load securing:
* Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various mounting holes in front crossmember and rear end carrier for 1.2 t lashing points
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be nested up to 20 mm)
* Rear approach slope approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, front wall, ramps, and rear wall
Nlodexglh Rspfx Aldsc
* Platform side wall color in RAL 9010 pure white
* Painting of the side walls in any RAL color available at extra cost
----Info:
* --Reinforced and certified structure according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from approx. week 30/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tand. 3-Seitenkp./ Kombiklappe/ Rampen
Ara
Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline"
----Brakes:
* EBS braking system
* Emergency release mechanism for spring-actuated cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizer assembly
----Drawbar / Flange Eye:
* Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing leg at the front
* 2 mechanical, hot-dip galvanized folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Bolted underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* 15-pin power connector
* LED lighting
* TPMS (Tire Pressure Monitoring System)
----Tipper Platform:
* Mesh hooks on the sides and rear within the central locking mounts, plus 2 hooks on the front wall
* Steel pallet three-way tipper body (continuous sidewalls – without intermediate stanchions – foldable, with tailgate spring assist)
* Bolted rear stanchions
* Combination steel double rear wing doors, asymmetrically split, 270° swing and lockable but not foldable, plus additional pendulum frame for automatic tailgate opening during tipping. Locking via galvanized locking bar and central locking.
* Deactivation feature for automatic rear tailgate when tipping backward with an open wing door
* 4 mm steel floor plate
* Ramp rack at rear for drive-up ramps
----Load Securing:
* 1 x 5 t lashing ring in each corner
* 4 x 3 t recessed lashing eyes on each side, integrated in the outer frame
----Ramps:
Nljdpfx Aljl Thymedoc
* 1 pair of aluminum drive-up ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles
* Lockable rear storage compartment fitted underneath the loading area in the chassis
----Paintwork:
* Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical drop legs: hot-dip galvanized
* Sidewalls and tailgate: painted RAL 9010 pure white
* Other RAL colors for sidewalls available at extra cost
* Axles, springs, flange towing eye, air reservoirs, and landing leg: painted in black
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle without initial registration, sold with manufacturer's warranty
* Subject to prior sale and errors excepted
----Delivery Time:
* Available immediately from Egestorf at the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm, total length 2,250 mm
Nsdpfx Aljv D Tcbedslc
* 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin electrical connector
* LED lighting
----General Attachments:
* Support winch at the front
* Fold-out external support legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Preparation for retrofitting container locks in front of bulkhead and rear slope for transporting 20" containers
* Bolted smooth steel bulkhead
* Side walls made of trapezoidal steel sheet, split and foldable once in the center
* Rear wall made of steel, can be slid and stored between the ramp holders when not in use, inside in front of the bulkhead
* Rear stanchions bolted
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to fit 3 t folding lashing eyes at 600 mm intervals
* In each front and rear corner: one 6.3 t lashing ring
* Multiple holes for 1.2 t lashing options in front and rear crossmember
* Profifix lashing rail along centerline for lashing up to LC 3,000 daN
----Ramps:
* One-piece mechanical grating ramps with spring assist for one-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm thickness)
* Rear approach angle approximately 860 mm on chassis
----Wheelbase:
* Wheelbase 1,140 mm
----Paintwork:
* Drawbar, bulkhead, tailgate, support legs, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and support winch painted in black
* Side walls painted in RAL color of choice (no special or metallic paints), can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced and certified body according to EN 12642 XL, including load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 30 / 2026
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Ara
Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 Cable Drums (Cable Reel Mounts)
----Braking System:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
Nledpfxjx Nlkae Aldjc
* 17.5" air suspension with raise/lower control
----Drawbar:
* Drawbar, 1,800 mm long, with 40 mm towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display capability on the truck dashboard via EBS signal (no installation required on the truck side)
* 15-pin power connector
* 2 additional LED reversing lights (activated via reverse gear)
* LED lighting
----General Attachments:
* Aluminum air tank
* Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm
* Side underrun protection
* Plastic quarter mudguards
* Rear underrun protection
----Flatbed:
* "Zurr-fix" outer frame, 45° bent, with drilled hole pattern for lashing points, lashing capacity per point: 2,000 kg at 480 mm spacing
* Option to install 3,000 kg folding lashing rings at approx. 600 mm spacing – 12 pcs 3,000 kg lashing rings included per side
* 5 pockets per side for stake tubes 100 x 50 mm in the outer frame – stakes themselves not included in delivery
* 30 mm phenolic resin-coated plywood floor
----Cable Drum Mounts (Drum Supports):
* 3 galvanized cable drum mounts secured by container locks with lateral forklift pockets, center-to-center 800 mm (pocket width 185 mm)
* Max. drum diameter 2,600 mm and max. drum width 1,650 mm
* Clear width between support arms approx. 1,775 mm, with crossbar
* 6,000 kg drum weight per cable drum mount
* Without drive system and drum brake
* Support arm with clamping latch to secure drum shaft
* Steel drum shaft, 76 mm diameter, with centering and rotating ends
* 2 clamping rings
* 2 centering cones made from polyamide
* 4 pcs 3.2 t lashing eyes on the support arms for customer-provided securing against drum rotation and unwinding
----Loading Height:
* Approx. 1,040 mm when loaded
----Paintwork:
* Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized
* Axles painted in black
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTALTandem Tieflader- Tiefbett, 5,5m - durchfahrbar
Ara
Durum: yeni, azami yük ağırlığı: 9.070 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.010 mm, yükleme alanı yüksekliği: 325 mm, Üretim yılı: 2026, * ETS-TA-B 11,9:
* Wabco EBS (elektronik fren sistemi)
* RDÜ (lastik basıncı izleme)
* Kampanalı frenler, 2 x 5,5 ton Gigant dingil
* Parabol yaylar ve denge tertibatı
* Yaklaşık 300 mm yükseklik ayarlı çekme kolu
* BPW destek ayağı
* Arka mekanik düşme destekleri
* Ön sağda yan duvara monte plastik alet kutusu
* Yan darbe koruması
* LED aydınlatma
* 50 mm iğne ağacı zemin
* Ön duvar ve arka travers köşelerinde her biri 1 x 6,3 ton sabitleme halkası, yanlarda ise her biri 2 x 6,3 tonluk UVV sabitleme halkası dış çerçeveye entegre
* Tek parça mekanik ızgara rampa, yay mekanizmalı, tek kişiyle kullanım için yaklaşık 2.350 x 870 mm (iç mesafe 20 mm, rampalar kaydırılamaz)
* Ön duvar, yan duvarlar, çamurluklar ve çekme kolu sıcak daldırma galvanizli
Nodswyhzpopfx Aldjlc
* Dingiller, yaylar, hava tankı, ön destek ayağı siyah renkte boyalı
* Tam üretici garantisine sahip yeni araç
* Hatalar ve ara satış hakkı saklıdır
* Yaklaşık 35. hafta / 2026'dan itibaren teslim edilebilir
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Ara
Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum supports
----Braking System:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with lift/lowering device
----Tow Bar:
* Tow bar 1,800 mm long with 40 mm towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display capability in the truck cockpit via EBS signal (no installation required on truck side)
* 15-pin power plug
* 2 additional LED reversing lights (activated by reverse gear)
* LED lighting
----General Attachments:
* Aluminum air tank
* Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm
* Lateral underrun protection
* Plastic quarter fenders
* Rear underrun guard
----Platform:
* Zurr-fix external frame, 45° bent, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing
* Option for 3,000 kg lashing rings at approximately 600 mm intervals – 12 units of 3,000 kg lashing rings included per side
* 5 pockets per side in the outer frame for pipe stakes 100 x 50 mm (stakes not included)
* 30 mm phenolic resin plywood flooring
----Drum Supports:
* 3 galvanized drum supports secured by container locks with side forklift pockets, center/center 800 mm (pocket width 185 mm)
* Maximum drum diameter 2,600 mm, maximum drum width 1,650 mm
* Clear width between support arms approx. 1,775 mm with cross-connection
* Load capacity per cable drum support 6,000 kg
* Without drive and drum brake
* Support arm with tension latch for securing the drum shaft
* Steel drum shaft, 76 mm diameter, with centering and rotating ends
* 2 locating rings
* 2 centering cones made of polyamide
* 4 units 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding
Nledpfex Nlkgjx Aldec
----Loading Height:
* Loaded approx. 1,040 mm
----Coating:
* Chassis, turntable, tow bar, outer frame, underrun guard hot-dip galvanized
* Axles painted in a shade of black
----Information:
* Technical uprating to 30 t GVW possible
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 51 / 2026
Küçük ilan
Empfingen
2.363 km
Ticari araç
Müller-Mitteltal3 Achs Anh für Container Frontbeladung TÜV03 27
Ara
Durum: ikinci el, ilk tescil: 10/2014, toplam ağırlık: 27.000 kg, boş ağırlık: 5.100 kg, renk: gri, vites türü: diğer, emisyon sınıfı: hiçbiri, Üretim yılı: 2014, azami yük ağırlığı: 21.900 kg, bir sonraki muayene (TÜV): 03/2027, süspansiyon: çelik, lastik boyutu: 265/70 R19.5, ön lastik ölçüsü: 265/70 R19.5, arka lastik boyutu: 265/70 R19.5, şoför kabini: diğer, Donanım: ABS, aydınlatma, basınçlı hava freni, ek farlar, elektronik denge programı (ESP), kamyon kaydı, sisal lambaları, şasi, Müller Mitteltal 3-axle trailer for skip containers TM 2 24.0
* Suitable for 2x 12 m³ containers/skips
* Lowerable pneumatic drawbar for front loading
* Adjustable stop point for container mounting
* Manual lashing with ratchets
* Sealed floor
* BPW axles
* Leaf suspension
* Galvanised frame/chassis
* Drum brakes
* Wear plates
* Additional auxiliary lights
* 7 lashing rings per side, mounted externally
* Large toolbox
* Weights: GVW – 27,000 kg, Tare – 5,170 kg, Payload – 21,830 kg
Nlsdpfx Aljzbbbdedjc
* German vehicle with German documentation!
* 1st owner!
* First registration: 21.10.2014
* Vehicle inspection (TÜV) valid until 03/2027
* Safety inspection (SP) valid until 09/2026
* VIN: WMM00000E0058208
Subject to prior sale, errors, and changes!
Some company logos have been removed from the images – please ask if needed!
No guarantee for the functionality of extra features!
Your contact:
Christoph Ott
Tel. & WhatsApp:
Küçük ilan
Stuhr
2.555 km
Çalışma platformlu römork
MÜLLER-MITTELTALGR-TA 18 Pritsche*Container*TwistLock*Kamera*TOP
Ara
Durum: ikinci el, azami yük ağırlığı: 13.860 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2022, yükleme alanı uzunluğu: 6.770 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 600 mm, yükleme alanı hacmi: 10 m³, Donanım: ABS, ? galvanizli şasi
? alçaktan bağlı
? 50 mm çekme halkası
? konteyner kilidi
Nsdpfxexb Ig Ss Aldslc
? her iki tarafta 12 bağlama halkası
? geri görüş kamerası
? kampana fren
? duomatic bağlantı
? ABS
? havalı süspansiyon
? alet kutusu
? EBS
? destek ayakları
? ikiz lastik
? BPW akslar
Tüm bilgiler taahhütsüzdür / ara satış hakkı saklıdır.
Küçük ilan
Stuhr
2.555 km
Açık dorseli römork
MÜLLER-MITTELTALGR-TA 18 Pritsche*Container*TwistLock*Kamera*TOP
Ara
Durum: ikinci el, azami yük ağırlığı: 13.860 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2022, yükleme alanı uzunluğu: 6.770 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 600 mm, yükleme alanı hacmi: 10 m³, Donanım: ABS, ? Galvanizli şasi
? Alçak bağlantı
? 50 mm çeki halkası
? Konteyner kilitleme
? Her iki tarafta 12 sabitleme halkası
? Geri görüş kamerası
? Kampana fren
? Duomatic bağlantı
? ABS
? Havalı süspansiyon
? Takım sandığı
? EBS
? Destek ayakları
? İkiz tekerlekler
? BPW akslar
Nodpfxsxb Igls Aldelc
Tüm bilgiler taahhütsüzdür / Ara satışa tabidir.
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTALAgrar Tand. 3- Seiten, hydr. Heckklappe, Rampen
Ara
Durum: yeni, azami yük ağırlığı: 16.000 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2024, * KA-TA-RT 21.0 ML
----Brakes:
* Without ABS/EBS, approved for 40 km/h
* Spring-loaded parking brake
* Drum brakes
----Axles:
* Gigant axles
----Suspension:
* Tandem balancing unit with 100 mm wide parabolic springs
----Drawbar / Draw Tube:
* Fixed welded draw tube with low-maintenance ball joint for K80 ball head coupling (adjustable +77 mm / 33 mm via front plate) with elevated tower for connection lines
----Electrics / Lighting:
* 12V 7+4 pin power supply
* LED lighting system 12/24V with protective grille
* 2 rear LED work lights switchable from the towing vehicle, no vehicle-side installation required
----General Attachments:
* Landing gear at the front
* Mechanical support legs at the rear
* Side marker lights with indicator activation
* Plastic quarter mudguards
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Hot-dip galvanized two-step access ladder in front of the front wall (left side, FR)
----Chassis:
Nodpfxor Dpzuj Aldolc
* Chassis made of high-tensile fine-grain steel
----Tipping Platform:
* Steel pallet 3-way tipper body with M-Strong side walls (fixed front wall, continuous side walls — without central posts — swinging via manual central locking and mechanically foldable with sideboard spring assisters)
* Hydraulic tailgate, 500 mm high, functions as hydraulic chute, with 115° opening angle
* 4 mm Hardox 450 steel floor
----Load Securing:
* 1 recessed and folding 7 t lashing ring in each corner
* 4 recessed and folding 3 t lashing rings per side
----Ramps:
* 1 pair of aluminium access ramps (10 t/pair for axle distance over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles
* 2 storage compartments for aluminum loading ramps integrated at the rear of the chassis
* Load securing according to EN 12642 XL
----Coupling Height:
* Approx. 530 mm loaded & approx. 590 mm unloaded
----Paintwork:
* Superstructure painted in RAL 9010 pure white
* Chassis, draw tube, rear support legs, underrun protection hot-dip galvanized
* Axles, air reservoir, front landing gear
* K80 coupling painted in black
----Notes:
* New vehicle with manufacturer warranty
* Errors and prior sale reserved
----Delivery Time:
* Immediately available ex Egestorf
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALAgrar Tand. 3- Seiten, hydr. Heckklappe, Rampen
Ara
Durum: yeni, azami yük ağırlığı: 16.000 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2024, * KA-TA-RT 21.0 ML
----Brakes:
* Without ABS / EBS, approved for 40 km/h
* Spring-loaded parking brake
* Drum brakes
----Axles:
* Gigant axles
----Suspension:
* Tandem equalizer unit with 100 mm wide parabolic springs
----Drawbar/Eyelet:
* Solidly welded drawbar with low-maintenance ball joint for K80 ball coupling (adjustable by +77 mm / 33 mm via the mounting plate), with raised gallows for connection lines
----Electrics / Lighting:
* 12 V 7+4-pin power supply
* LED lighting system 12 / 24 V with protective grid
* 2 LED work lights at the rear, switchable from the towing vehicle without vehicle-side installation
----General Attachments:
* Landing gear at the front
* Mechanical drop-down supports at the rear
* Side marker lights with indicator control
* Plastic quarter mudguards
* Plastic toolbox approx. 750 x 350 x 300 mm, positioned on the right
* Hot-dip galvanized, two-step access ladder in front of the front wall (left side)
----Chassis:
* Chassis made of fine-grain steel
----Tipping Platform:
* Steel pallet-wide three-way tipper body with M-Strong drop sides (fixed front wall, continuous side walls – without center posts – swinging via manual central locking and mechanically foldable with drop side spring lifter
* Hydraulic tailgate, 500 mm high, serves as hydraulic chute with a 115° opening angle
* 4 mm Hardox 450 steel floor
----Load Securing:
* 1 x 7 t recessed and foldable lashing ring in each corner
* 4 x 3 t recessed and foldable lashing eyes on each side
----Ramps:
* 1 pair of aluminum loading ramps (10 t / pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles
* 2 integrated rear ramp compartments in the chassis for aluminum loading ramps
* Load securing to EN 12642 XL standard
----Coupling Height:
* Approx. 530 mm loaded & approx. 590 mm unloaded
----Paintwork:
* Superstructure painted RAL 9010 pure white
* Chassis, drawbar, rear supports, underrun protection hot-dip galvanized
* Axles, air reservoir, front landing gear, K80 coupling painted in black tone
Nlodpfx Ajr Dpz Hjldsc
----Information:
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL2achs, 21to,Agrar, Stahl,3 Seitenkip. -Bordmatik
Ara
Durum: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 1.000 mm, Üretim yılı: 2026, KA-TA-R 21.0:
----Axles:
* Gigant axles
* Start-up assistance for maneuvering purposes on the 1st axle (activated via EBS)
* 1st axle as lift axle (fully automatic)
* Forced lowering and lifting of the lift axle via an additional switch in the tractor
* Automatic lowering of the air suspension during tipping (can be deactivated via control element in the cab)
----Brakes:
* EBS (electronic braking system with RSS)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Tyres:
* 600/55 R 22.5
----Suspension:
* Air suspension with level control during tipping operation
----Electrics / Lighting:
* 13-pin 12V power connector
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* LED rear lights 12 / 24 V with galvanized protective housing
----Drawbar / Flange eye:
* Drawbar with adjustable K80 ball coupling
----Coupling height:
* Coupling height approx. 440 - 550 mm loaded, with elevated tower for connection lines
----General attachments:
* Support winch at the front
* Bolt-on steel underrun protection
* Plastic quarter mudguards before the first and after the last axle
* Removable protective grille for rear lights (not permitted under road traffic regulations – must be removed before driving on public roads)
----Chassis:
* Chassis made of fine-grained steel
----Tipping body:
* Three-way steel tipper body (fixed front wall, continuous side walls without central posts, right side wall swinging on central locking and foldable with sideboard spring raising, left side wall foldable with sideboard hydraulics, tailgate swinging with automatic hook locking)
* 5mm steel floor made of HARDOX-450 or equivalent
----Load securing:
* 4 x 3 t UVV lashing rings recessed in the outer frame on each side
Nljdpfxjy Tr Hij Aldec
----Paintwork:
* Axles, air tank, support winch, flange eye painted in black tone
* Tipping body painted in RAL color of choice (no special or metallic coatings), changes possible up to approx. 6 weeks before completion
* Chassis, protective grille for rear lights, hot-dip galvanized
----Info:
* Sample images
----Delivery time:
* The vehicle is still under construction and will be completed in week 44 / 2026, assuming uninterrupted and continuous production.
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL2achs, 21to,Agrar, Stahl,3 Seitenkip. -Bordmatik
Ara
Durum: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 1.000 mm, Üretim yılı: 2026, KA-TA-R 21.0:
----Axles:
* Gigant axles
* Start-up aid for maneuvering on the 1st axle (activated via EBS)
* 1st axle as lift axle (fully automatic)
* Forced lowering and raising of the lift axle via an additional switch in the tractor unit
* Automatic lowering of the air suspension during tipping (can be deactivated by a control element in the driver’s cab)
----Brakes:
* EBS (electronic braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Tyres:
* 600/55 R 22.5
----Suspension:
* Air suspension with level control during tipping process
Nlsdpey Tr Hcsfx Aldec
----Electrics / Lighting:
* 13-pin 12V power connector
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* LED rear lights 12 / 24V with galvanized protective housing
----Drawbar / Flange Tow Eye:
* Drawbar with K80 ball coupling, adjustable mm (dimensions not specified)
----Coupling Height:
* Coupling height approx. 440 - 550 mm when loaded with elevated support for connection lines
----General Attachments:
* Landing leg at the front
* Bolted steel underrun protection
* Plastic quarter mudguards before the first and after the last axle
* Removable tail light guards (not permitted under StVZO and must be removed before driving on public roads)
----Chassis:
* Chassis made of fine-grained steel
----Tipping Platform:
* 3-way steel tipper body (fixed front wall, continuous side walls—without intermediate posts—right side wall swinging via central locking as well as folding down with drop-side spring lifter)
* Left side wall foldable with drop-side hydromat
* Tailgate swinging via automatic hook lock
* 5mm steel floor made of HARDOX-450 or equivalent
----Load Securing:
* 4 x 3 ton UVV lashing rings recessed on each side in the outer frame
----Painting:
* Axles, air tanks, landing leg, flange tow eye painted in black
* Tipping body painted in one RAL color of your choice (no special or metallic paint), can be changed up to approx. 6 weeks before completion
* Chassis, protective grilles for rear lights, hot-dip galvanized
----Notes:
* Sample images
----Delivery Time:
* The vehicle is still under construction and, barring any disruptions or changes in production, will be completed in calendar week 44 / 2026
Küçük ilan
Kehl
2.431 km
Brandalı açık römork
MÜLLER-MITTELTAL10t Tandem Anhänger*Edscha*TOP-Zustand*
Ara
Durum: ikinci el, azami yük ağırlığı: 6.610 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2017, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 34 m³, Üretim yılı: 2017, Donanım: ABS, 2-Axle Müller-Mitteltal TA-2 Pr.+Pl. Trailer
VIN: H0061885
Chassis / Attachments:
* Air suspension
* Tyres: 235/75 R17.5
* Remaining tread: approx. 70%
* 1x Jost landing leg
* 2x rear support legs
Body:
* Pr.+Pl.
* Sliding tarpaulin
* Edscha sliding roof
* Dimensions: 5,500 mm x 2,470 mm x 2,500 mm
* Approx. 34 m³, 13 pallets
Weights:
* GVW: up to 10,500 kg – downrated to 10,000 kg (no SP required)
* Unladen weight: 3,390 kg
* Payload: 6,610 kg
Other details:
* German vehicle
* MOT valid until 10/2026
* No SP required due to weight downrating
New MOT (main inspections), safety tests, or weight uprating/downrating can be arranged on request. We are happy to assist in obtaining export/transfer license plates, and we can also organise vehicle transfers within Germany. Contact us!
---
We speak: German, English, and Russian!
---
No liability for typographical or printing errors, changes, prior sale, and errors excepted!
---Who are we?
Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our long-standing experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On 11,000 m² you will find a wide range of vehicles. Our corporate philosophy is characterised by fairness and integrity. Since customer satisfaction is very important to us, we offer our clients an excellent all-round service package and provide them with a competent contact person who assists them in purchasing or selling vehicles.
See for yourself!
Our services for you:
Loading of vehicles
We are happy to assist you in loading your purchased vehicles.
Nledpoy Squpofx Aldoc
Organising special transports
We can assist you with organising special transports.
Day plates/export license plates
We are glad to help you obtain export or short-term licence plates.
Customs clearance
We are happy to assist you with customs formalities.
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal ka-ta- r 18,0 tandem 3 seitenkipper nl 13.500kg"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.





































































































































































































































































































































































































































































