Kullanılmış Fliegl Dts 300 P 3-Achs Plateau Tieflader 8,2M Luft Hyd satın al (54.133)

Durum: ikinci el, azami yük ağırlığı: 23.360 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2008, Üretim yılı: 2008, Donanım: ABS, Katlanabilir çift rampa, hidrolik, genişletilebilir Podpjx Sb D Ijfx Ahhopu Durum: Pas lekeleri, genel olarak iyi

Durum: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: Ppedpfov D Tbkox Ahhju * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin connector * LED lighting system 12/24 V * 2 additional LED reversing lights at rear (operated via reverse gear) * 1 removable LED beacon (including holder) at rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 meter warning panel sets at the front and rear * Support crank at the front * Rear external folding supports * Plastic toolboxes approx. 750 x 350 x 300 mm, mounted on left and right sides * Lateral underrun protection * Rear underrun guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable, locking dimension retracted per ISO - DIN 15190 = 2,259 mm; container locks extended = 2,819 mm (this dimension is not to DIN) for an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, angled approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing eyes every 600 mm - 5 x 3 t UVV-certified lashing eyes installed on each side - * At each front and rear corner: 1 x 6.3 t lashing ring (front, directly behind the container locks in the wooden floor, and rear in the end cross member) * Various holes for 1.2 t lashing points in front and rear cross members ----Ramps: * 1 pair of aluminium slide-in ramps, approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Storage compartment at the rear, recessed in the chassis under the loading area ----Paintwork: * ---Chassis, drawbar, front wall, underrun guard, and rear supports hot-dip galvanized--- * Axles, air tanks, front support crank, and flange towing eye painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 39/2026

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2022, lastik boyutu: 385/65 R22,5, Krone SDR 27 Cool Thermo King SLX 300, kaldırma aksı, palet kutusu, çift kat hazırlığı (kirişsiz), çiçek genişliği 2.490 mm, alet kutusu, yedek tekerlek tutucu, arka kısmında roll-compression tamponu, toplam soğutma saati 1.936 / dizel 1.806. Sadece ticari müşterilere, her türlü garanti hariç satılmaktadır. Hata ve ara satış hakları saklıdır. Ppsdpfoy N Tgpsx Ahheu

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2022, lastik boyutu: 385/65 R22,5, Krone SDR 27 Cool Thermo King SLX 300, kaldırma aksı, palet kutusu, çift kat hazırlığı (kirişsiz), çiçek genişliği 2.490 mm, alet kutusu, yedek tekerlek tutucu, arka kısmında roll-compression tamponu, toplam soğutma saati 1.936 / dizel 1.806. Sadece ticari müşterilere, her türlü garanti hariç satılmaktadır. Hata ve ara satış hakları saklıdır. Ppedpoy N Tgiefx Ahheu

Durum: ikinci el, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2008, bir sonraki muayene (TÜV): 07/2025, yükleme alanı uzunluğu: 13.450 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.600 mm, Üretim yılı: 2008, Donanım: ABS, * KÖGEL 3-axle * Standard box semi-trailer * Second owner (Germany) * BPW ECO Plus axles * Air suspension * Double-deck * Rear roller shutter door * Tyres: 60-80% (385/65 R22.5) * Dimensions: L-13,450 W-2,480 H-2,600 mm internal clearance * Colour: White with lettering, black chassis Pedpfx Aezb T Hfshhspu * etc. Please, no emails—phone calls only!!! Subject to prior sale and errors! Functionality of extras not guaranteed! We also speak: ENG / ITA / HR / SRB / BiH Your contact: Ludvig Kozuha, Mobile WhatsApp, Viber Over 20 years of experience in commercial vehicle purchase & sales! - RELIABLE & FAIR - Former DAF authorized dealer!

Durum: ikinci el, azami yük ağırlığı: 28.000 kg, toplam ağırlık: 38.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2018, bir sonraki muayene (TÜV): 03/2027, yükleme alanı uzunluğu: 13.480 mm, yükleme alanı genişliği: 2.540 mm, Donanım: ABS, * 9008 – Vehicle ID for telephone inquiries * Low-bed semi-trailer, Type: MTS-3 * Special low-bed semi-trailer for aerial work platform transport with fold-down rear * ABS, EBS, BPW Eco Plus axles, twin tires, air suspension with lift/lower function, first axle liftable, third axle friction-steered with additional steering Ppedpfxjy I Iahe Ahhju * Gooseneck, front wall, lashing eyes, storage boxes * 24 V electric pump via NATO plug * Electric winch * Radio remote control for winch and hydraulics * Rear loading platform hydraulically foldable up and down, hydraulic extendable ramp * Hydraulic ramp at the gooseneck, can be raised * Grating floor on the entire loading area * Technically permitted gross weight: 41,500 kg * Tires 1st axle: 235/75R17.5 (6 / 8 / 11 / 11 mm) * Tires 2nd axle: 235/75R17.5 (9 / 9 / 9 / 9 mm) * Tires 3rd axle: 235/75R17.5 (11 / 11 / 9 / 9 mm) ---Our e-mail address: Our service for you: - Procurement of temporary or export license plates - Nationwide delivery/transport within the EU - Customs clearance for vehicles to non-EU countries If you have questions in Russian, you can call the following number * WhatsApp just for Russian speakers: * WhatsApp for English, German, and other languages:

Durum: ikinci el, boş ağırlık: 10.100 kg, azami yük ağırlığı: 38.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, Donanım: ABS, Her kullanılmış treyler için güncel ve eksiksiz bir denetim ve fonksiyon raporu alırsınız. Şasi: - Sağlam çelik şasi kaynak konstrüksiyonu, ön çerçeve kıvrımı ve arka kısmında yaklaşık 500x100 mm eğimli düz yükleme alanı - 200 mm çerçeve boynu, köşeleri eğimli - Kaz boynunun sonu eğimli, yaklaşık 500 x 100 mm (arka eğim alanında dış çerçeve üzerinde tırmanma dişleri) - Değiştirilebilir 2'' king pimli çift king pim pozisyonu - Dış çerçeve dışa kapalı, sabitleme kayışları ile yük bağlamaya uygun delikli dış çerçeve (zincir ile kullanılamaz) - Güçlendirilmiş şasi yapısı / ağırlık merkezinde noktasal yük taşıma - Yükleme alanında uzatılabilir genişletmeler için hazırlık - Ekskavatör çukuru (kapaksız), derinlik yaklaşık 220 mm, genişlik yaklaşık 600 mm, yaklaşık 2. aks sonrasında araç sonuna kadar - Aks önünde çelik kapaklı 1 çift teker çukuru - (Kapaklarda Körapur kaplama), derinlik yaklaşık 400 mm, ayrıca 1. ve 2. aks arasında çelik kapaklı 1 çift teker çukuru - Alt koruma = uzatılmış arka sac - Arka düşme ayakları Rampalar: - Özel üretim, mekanik uzatmalı 2 parçalı yükleme rampaları - Yaklaşık 2.850 mm + 1.850 mm uzunluk, hidrolik rampalı kaldırma sistemi (sadece elektro hidrolik ünite ile birlikte) - Genişlik yaklaşık 800 mm - Ahşap kaplama - Rampalarda tırmanma dişleri dahil - Sürüş pozisyonunda sabitleme kayışları ile kitlenebilir - Kumanda koluyla arka sağda kullanım - Yanlara hidrolik olarak kaydırılabilir Psdpozdzrtsfx Ahhspu Zemin: - 35 mm lâriç ahşap zemin, alüminyum omega profillerle Destek Ayakları: - Mekanik 24 ton destek ayakları, tek taraflı çalıştırma ve itme dengesiyle Akslar, Direksiyon ve Lastikler: - BPW havalı süspansiyon aksları, her biri 10 ton aks yükü, körük çapı 360 mm - S-kam fren 300/200 mm, asbestsiz fren balataları - Otomatik çubuk ayarlayıcı - Kaldırma ve indirme mekanizması, toplam kaldırma yüksekliği yaklaşık 200 mm - 2. sürüş pozisyonu, küresel vana ile +50 mm - 1. aks kaldırılabilir aks (EBS kablolu), otomatik onaylama, treylerde düğme ile mekanik acil onaylama - 3. aks kaymalı yönlendirmeli takip aksı, elektrikli ve mekanik kilitleme - 12 çelik jant, 10 delikli, merkezden presli - 12 lastik 245/70 R 17,5 143/141J, tubsuz - Lastik basınç kontrol sistemi dahil Aksesuarlar: - Kaz boynunda takılabilir yan ve arka paneller, yaklaşık 400 mm yüksekliğinde - Stepne tutucu - Yan alüminyum çarpma koruması - 4 adet takoz ve aparatı - Uzun plaka tutucu arka sacda - 1 adet arkada takılabilir ECE levhası - Yandan 11 çift ZK modül 10t: - 2x kaz boynunda - 9x yükleme alanında - Uyarı levhaları uzatılabilir, her biri 3 konum lambası, ön yükleme ayaklarında ve arka arka sac önünde, yükleme genişliği 4.500 mm'ye kadar kademesiz uzatılabilir - Yükleme alanında takılabilir uyarı levhaları için 4 yuva - Yanlarda 100x50 mm takmatik dikme için 6 çift yuva - Kaz boynunda dış çerçeveden ana şasiye kadar 2 adet 100x50 mm dikme sırası (1x king pin öncesi, 1x sonrası) - Yükleme alanında dış çerçeveden ana şasiye kadar 3 adet 100x50 mm dikme sırası (1x ön, 1x 1. aks öncesi, 1x 3. aks sonrası) - Yük platformunda konteyner kilidi için 2 çift çelik plaka, 1x 20ft konteyner alacak şekilde - Alt korumada monte edilmiş kauçuk etek

Durum: ikinci el, ilk tescil: 02/2008, Üretim yılı: 2008, Schmidt Hagen SP/42/E/13,5-21,5 ∗3 dingilli platform dorse∗Yönlendirilebilir dingiller∗ALCOA∗ !!! Çok iyi durumda !!! ● ABS ● Havalı süspansiyon ● Kaldırma/indirme sistemi ● Zemin yüksekliği: 1.420 mm ● Alcoa - Dura Bright jantlar ● 3 x Mercedes dingil, disk frenli ● Tüm 3 dingil yönlendirilebilir! ● Lastik ölçüsü: 385/55 R 22.5 ● Diş derinliği: 3/2 / 5/4 / 5/6 mm ● Toplam ağırlık: 42.000 kg ● Boş ağırlık: 10.200 kg ● Yük kapasitesi: 31.800 kg - Alman dorse - TÜV / Araç muayenesi: İsteğe bağlı ve ek ücret karşılığında: YENİ! Hatalar ve ara satış hakkı saklıdır! Ppedpfx Ajyutxzehhju = Daha fazla bilgi = Daha fazla bilgi için Joannis Arpantzanis veya Kai Bühler ile iletişime geçin.

Durum: ikinci el, boş ağırlık: 10.600 kg, azami yük ağırlığı: 22.500 kg, toplam ağırlık: 33.100 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/1984, yükleme alanı uzunluğu: 11.900 mm, yükleme alanı genişliği: 2.730 mm, yükleme alanı yüksekliği: 950 mm, süspansiyon: çelik, lastik boyutu: 7.50R15, renk: gri, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Vehicle location: Bovenden, 3 axles, SAF axles, leaf suspension, lashing eyes, two-piece loading ramps, mechanical ramps, side aluminium underrun protection, supports, twin tyres Pedpfx Ahji Rp A Nshspu Body: 3-axle low-bed semi-trailer with two-piece mechanical ramps, loading platform length below approx. 8,900 mm! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, Subject to change, prior sale, and errors excepted!

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes Pjdpsl Tnvgsfx Ahhepu ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle self-steering, with electro-pneumatic steering lock ----Suspension: * Air suspension with lift/lowering system and return-to-ride (RtR) valve ----Electrical / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted to trailer as an infotool, with pressure sensors for total axle load indication * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing legs at the front, mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder on the right side under the chassis ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and a front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable, on the side of the platform * Rear board – 150 mm high, slotted in place * Rear bevel on the fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks; lowbed area with 60 mm wooden planks * Tread plate over the axles ----Widenings: * 8 x mechanical swing-out extensions to achieve a total width of 3 m (not on the rear bevel). Widening boards available, stored on the fifth wheel platform * Mechanically adjustable warning sign assemblies front and rear ----Load Securing (lashing package): * On the fifth wheel platform: 2 x 6.3 t lashing rings per side; 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform sides: 2 x 13.4 t lashing rings per side; 4 x 10 t lashing rings, swiveling and retractable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side; 1 lashing ring at the rear in the excavator stick support * 2 x container locks immediately after the goose-neck in the lowbed area ----Excavator Stick Support: * Continuous excavator stick support from end of last rigid axle over steering axle to rear crossmember, internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable side-to-side) * 4-way valve block for future customer upgrade of hydraulic ramp shifting * The outer plank of the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and in the approach bevel ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 l up to 120 l/min) ----Payload Dimensions: * Fifth wheel loading area: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Unloaded loading height: approx. 910 mm (including 860 mm approach bevel) ----Coupling Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show equipment not included with the offered vehicle ----Delivery Time: * Available from CW 38/2026

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 3 Profil 30.0: Product Description (English, for professional trade platforms) ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with electro-pneumatic steering lock (trailing axle) ----Suspension: * Air suspension with lifting/lowering function and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as information tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support jacks at the front plus mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder, side right under the chassis ----Low Loader Platform: * Saddle platform with 45° chamfered front corners and integrated toolbox at the front made of galvanized sheet steel, B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white), foldable and removable, fitted on the sides of the saddle platform * 150 mm high removable rear drop-in board * Tapered rear section on the saddle platform towards the low-bed area, approx. 700 mm long * Saddle platform with 50 mm hardwood planking and low-bed platform with 60 mm hardwood planking * Tread plate above the axles ----Widenings: * 8x mechanical folding extensions to 3 meters total width, except for the tapered rear section (extension planks available and stowed on the saddle platform) * Mechanical adjustable warning sign packages at front and rear ----Load Securing (Lashing Package): * On the saddle platform, 2x 6.3 t lashing rings per side, and 3x 5 t lashing stakes per side in the outer frame * On the low-bed platform, 2x 13.4 t lashing rings per side and 4x 10 t swiveling, retractable lashing rings set into the outer frame * On the sides, 2x 6.4 t lashing points per side, plus 1 lashing ring at the rear in the excavator arm rest * 2x container locks directly after the goose-neck in the low-bed platform ----Excavator Arm Rest: * Continuous excavator arm trough from end of the last rigid axle across the steering axle up to the end plate, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way valve block for later customer-side retrofit of hydraulic ramp shifting * The outer board of the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump flow rates over 40 l/min up to 120 l/min) ----Loading Dimensions: Psdpfjpk D I Asx Ahhspu * Saddle platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) ----Fifth-wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support jacks, and air tanks painted in black * Vehicle is fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images

Durum: yeni, azami yük ağırlığı: 26.500 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.450 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, WIESE 3-axle low-loader with ramps and wheel recesses – NEW Availability approx. 4 months from order ---Vehicle Data--- Manufacturer: WIESE Type: WSA 3-36 TL Year of manufacture: 2025 Axles: 3 Gross vehicle weight: 39,000 kg Fifth wheel load: 12,000 kg Axle group max load: 27,000 kg Unladen weight: approx. 9,500 kg Tyres: 235/70 R17.5 Brakes: WABCO EBS with RSS ---Dimensions--- Loading platform length: 13,450 mm Low-bed length: approx. 9,550 mm Gooseneck length: approx. 3,640 mm Overall width: 2,550 mm Loading height low-bed: approx. 920 mm Fifth wheel height: approx. 1,250 mm ---Equipment--- 3 x SAF axles (9 t) with air suspension 1st axle: Lift axle 3rd axle: Follower axle with steering (lockable) Electronic air suspension E-TASC WABCO EBS braking system with Roll Stability Support Tire pressure monitoring system for 12 tyres Complete LED lighting 4 x LED work lights 15-pin socket + 2x 7-pin sockets ---Body--- Robust steel frame 28 mm hardwood floor / omega floor 13 pairs of lashing rings (8,000 kg) Additional lashing points (5,000 daN) 2 pairs of wheel recesses Excavator arm recess Aluminium plug-in side boards on the raised platform Front-mounted toolbox ---Ramps--- 2 x aluminium drive-on ramps Dimensions: approx. 2,800 x 600 mm Pjdpfx Ahoyuq Igshepu Load capacity: 27,460 kg Spring lift assistance Sideways adjustable ---Other Features--- Warning plates for overwidth up to 3 m Contour marking as per ECE-R48 Technical documentation and TÜV report For further information, please do not hesitate to contact us.

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2020, yükleme alanı uzunluğu: 5.750 mm, yükleme alanı genişliği: 2.150 mm, yükleme alanı yüksekliği: 900 mm, dingil mesafesi: 1.000 mm, vites türü: diğer, şoför kabini: diğer, frenler: diğer, * German trailer * 1st owner * Condition as shown in photos * Special trailer with tridem axle and divided loading platform * Front section with mesh extension, electrically tipper on both sides * Behind that, flatbed/platform/low-loader with access ramps * Large flatbed area with phenolic plywood flooring and DIN tie-down rings * Ideal for landscaping, construction industry and much more Pedjxnqv Aspfx Ahhspu * Loading area dimensions: 3.75 m x 2.15 m x 0.35 m with aluminium loading flaps * Payload: 2,230 kg * Tipping section dimensions: 2.00 m x 2.15 m x 0.90 m * Electric tipping mechanism with wired remote control * 100 km/h approval * Tipping floor with steel base * Tridem axles * Gross vehicle weight (GVW): 3,500 kg * Unladen weight: 1,270 kg * Payload: 2,230 kg If a new TÜV inspection is required, we will be happy to provide an offer through our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. Further trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend inspection and testing of the goods to avoid any misconceptions about the condition and suitability. Inspections and tests are possible at any time by appointment and are expressly encouraged. All details are given without guarantee. We assume no liability for errors or mistakes in the offer. The buyer is obliged to verify the condition and features of the goods/vehicles on their own responsibility. Subject to change, prior sale and errors.

Durum: ikinci el, boş ağırlık: 11.300 kg, azami yük ağırlığı: 29.700 kg, toplam ağırlık: 41.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2006, süspansiyon: hava, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, * German semi-trailer * Special low-bed trailer for transporting commercial vehicles and construction machinery * Manufactured by Estepe, a premium manufacturer from the Netherlands (Estepe type E0PL 24-41) * Years of experience in constructing special low-bed trailers for transporting trucks and construction equipment ensure attention to every detail * Naturally equipped with extendable low-bed, hydraulic ramps, and hydraulic platform * Special winch with remote control, etc. * BPW axles * 3rd axle - lift axle * Air suspension with raise/lower function * Central lubrication system * Gross vehicle weight (GVW): 41,000 kg * Unladen weight: 11,300 kg * Payload: 29,700 kg If a new TÜV inspection is desired, we are happy to provide a quote from our partner workshops. Ppedertbb Sepfx Ahhsu Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that the buyer has an accurate understanding of the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly encouraged. All information provided is without guarantee. We do not accept liability for errors or inaccuracies in this offer. The buyer is responsible for independently verifying the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors. - .

Durum: ikinci el, azami yük ağırlığı: 23.700 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2023, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Gross weight: 24,000 kg / 30,000 kg Unladen weight: 6,300 kg Payload: 17,700 kg / 23,700 kg Overall length: 10,900 mm Ppsdpewrv Sasfx Ahheu Loading length: total 8,600 mm, 6,500 mm including rear taper, 2,100 mm gooseneck Width: 2,550 mm Loading height: 900 mm Further information: - Robust welded construction made of high-tensile fine-grained steel - Hot-dip galvanized - Rear supports - Twin tyres 235/75 R17.5 - Warning signs - LED reverse lights - Lashing points on outer frame - Lashing eyes: 4x gooseneck, 6x low bed (10,000 daN) - One-piece hot-dip galvanized loading ramps (3,100 mm x 750 mm) with 50 mm softwood covering, laterally adjustable - Toolbox in gooseneck - Plastic tool box - Bumper protection - Floor with 50 mm softwood covering - Rear climbing strips on loading slope

Durum: ikinci el, azami yük ağırlığı: 34.440 kg, toplam ağırlık: 46.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/1999, yükleme alanı uzunluğu: 13.550 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 950 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 46.500kg Boş ağırlık: 12.060kg Yük kapasitesi: 34.440kg Toplam uzunluk: 13.550mm - 26.550mm Genişlik: 2.550mm Diğer Bilgiler - 3 aks hidrolik zorunlu yönlendirmeli - Üstsadel yönlendirme kıskacı - Rampa askı rayı - Yükleme alanı için takma çıtalar Ppsdpoycpbnefx Ahhsu - 2 kat teleskopik, 26.550 mm’ye kadar uzatılabilir - Kuğu boynu üzerinde alet kutusu - E-Tekerlek - Elektrik ön hazırlığı - Hidrolik art yönlendirme fonksiyonu, elektronik uzaktan kumanda - Geniş bağlama paketi - Kendi hidrolik pompa ünitesi Diğer yeni ve ikinci el havuzlu yarı römorklar mevcuttur. Daha fazla bilgi için

Durum: yeni, azami yük ağırlığı: 8.900 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: Pjdpfx Ahjy U A Elshepu ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in B-dimension approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 removable LED beacon (incl. holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign packages front and rear * Landing gear at front * External folding rear supports * Plastic toolboxes approx. 750 x 350 x 300 mm on left and right sides * Side underrun protection * Rear underrun protection * Plastic quarter fenders ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable, locked dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) with an overall external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t drop-lashing brackets possible every 600 mm – fitted with 5 x 3 t UVV lashing brackets on each side – * Each front and rear corner fitted with 1 x 6.3 t lashing ring (front just behind the container locks in the wooden floor, rear on the end member) * Various holes in the front and rear member for 1.2 t lashing options ----Ramps: * 1 pair of aluminium slide-in ramps, approx. 3,310 x 410 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Rear accessible storage compartment under the loading area integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front landing gear, and flange towing eye painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available from approx. week 38/2026

Durum: yeni, azami yük ağırlığı: 8.900 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Platform: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: Pedpfx Ahey U A Efshspu * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B-dimension approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 LED beacon (removable, incl. holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign sets front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each side left & right * Side underride protection * Rear underride guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable up to 3 m container outer width) and lockable, locking dimension retracted as per ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm ----Load Securing: * Perforated outer frame angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible - laterally, 5 x 3 t UVV lashing rings on each side installed * In each corner front and rear, 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end beam) * Various bores in the front and end beams for 1.2 t lashing points ----Ramps: * 1 pair of aluminum slot-in ramps approx. 3,310 x 410 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Rear stowage compartment integrated under the loading area in the chassis ----Coating: * ---Chassis, drawbar, front wall, underrun protection as well as rear supports hot-dip galvanized--- * Axles, air tanks, front support winch as well as flange drawbar eye painted in a black tone ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample pictures ----Delivery time: * Available from approx. week 38/2026

Durum: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Braking System: * EBS (Electronic Braking System) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B-dimension approx. 8,080 mm) * 40 mm flange towing eye ---- Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 removable LED rotating beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign packages at the front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, mounted left & right side * Side underrun protection * Rear underrun guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) at an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm – 5 x 3 t UVV lashing brackets installed per side * In the corners at the front and rear, one 6.3 t lashing ring each (front directly behind the container locks in the wooden floor, rear in the end crossmember) * Various bores in the front wall and end crossmember for 1.2 t lashing options ----Ramps: Podpfxjv D Tbde Ahhjpu * 1 pair of aluminum drive-on ramps approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment below the loading area, integrated in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun guard, and rear supports hot-dip galvanized--- * Axles, air tank, front support winch, and flange towing eye painted in a shade of black ----Additional Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 39/2026

Durum: ikinci el, boş ağırlık: 10.100 kg, azami yük ağırlığı: 38.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report. Chassis: - Robust steel frame welded construction with front frame cranking and a flat loading area featuring a rear taper approximately 500x100 mm - Frame neck 200 mm with beveled corners - Sloped end at gooseneck approx. 500 x 100 mm (anti-slip ribs on the outer frame at the rear taper area) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outwards as perforated outer frame for securing with lashing straps (chains not possible) - Reinforced frame design / point load at the center of gravity - Preparation for extendable load area widenings - With excavator trough (uncovered), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle up to the end of the vehicle - 1 pair of wheel recesses in front of the axle with steel covers (covers with Körapur coating), depth approx. 400 mm, and 1 pair of wheel recesses between the 1st and 2nd axles with steel covers - Underrun protection = extended end plate - Drop-down supports at the rear Ramps: - Special two-part loading ramps with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting system (only in connection with electrohydraulic unit) - Width approx. 800 mm - Wooden deck - Including anti-slip ribs on the ramps - Secured in transport position with lashing straps - Operation via control lever mounted at the rear on the right in driving direction - Hydraulically adjustable sideways Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gear: - Mechanical 24 t landing legs with single-sided operation and stroke compensation Ppodpjzabnbefx Ahhsu Axles, Steering, and Tires: - BPW air suspension axles, each with a 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lowering device with total stroke approx. 200 mm - 2nd ride height via ball valve +50mm - 1st axle lift axle (wired through EBS), automatic confirmation with mechanical emergency activation via button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-hole, mid-centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Removable side and rear boards on the gooseneck approx. 400 mm high - Spare wheel carrier - Side aluminum underrun protection - 4 wheel chocks with holders - Elongated license plate holder in end plate - 1 removable ECE plate at the rear - 11 pairs of ZK-modules 10t on the sides: - 2x on the gooseneck - 9x on the loading area - Extendable warning boards, each with 3 position lamps, at the front on landing gear and at the rear before the end plate, steplessly extendable up to a loading width of 4,500 mm - 4 mountings for warning boards that can be inserted into stake pockets on the loading area - 6 pairs of side stake pockets for plug-in stakes 100x50 mm - 2 rows of crosswise stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame inward up to main frame (1x before and 1x after king pin positions) - 3 rows of crosswise stake pockets for plug-in stakes 100x50 mm on the loading area from outer frame inward up to main frame (1x in the front area, 1x before 1st axle, and 1x after 3rd axle) - 2 pairs of steel plates on the loading area for container locks for accommodation of 1x 20ft container - Rubber apron mounted on underrun p

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 6.640 kg, toplam ağırlık: 40.000 kg, ilk tescil: 02/2023, yükleme alanı uzunluğu: 13.510 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 445/45 R 19,5, renk: gri, Üretim yılı: 2023, 3-Axle Mega Flatbed Semi-Trailer HeavyTrailer Gross Weight: approx. 40,000 kg Fifth Wheel Load: approx. 16,000 kg Axle Load: approx. 24,000 kg Unladen Weight: 6,640 kg Payload: 33,360 kg Length: 13,510 mm Vehicle Width: 2,540 mm Coupling Height: approx. 980 mm / 1,100 mm Loading Height (unladen): 1,080 mm / 1,200 mm Chassis - Chassis frame construction made of welded longitudinal beams and continuous crossmembers - Wide underride guard nose approx. 700 mm - 6 pairs of lashing eyes (2,000 kg lashing force), welded into the outer frame - 6 pairs of stanchion pockets (80 x 50 mm) in the outer frame - 6 pairs of stanchion pockets (80 x 50 mm) on the inside of the longitudinal beam - 2 pairs of ferry lashings, painted yellow - 6 pairs of lashing eyes (5,000 kg lashing force), welded into the outer frame - Front wall approx. 2,000 mm high with metal cladding, bolted design - Rear premium lamp panel, large and edged - Welded underride protection (rectangular tube) - Side underrun protection on both sides Landing Gear - 24 t telescopic landing gear with single-sided operation and semi-circular support plate Axles/Suspension - 3 axles at 8 t each (technically 9 t), disc brakes - Secondary ride height: Button for 2nd ride height at the bracket for raising and lowering (+ approx. 120 mm) - Air suspension, total lift approx. 300 mm - Raise and lower device with 1 rotary valve - Mounting bracket for raise/lower device, bolted design - 6 tyres 445/45 R 19.5 - Wheel mounting via centralisation Brakes - Two-line compressed air brake system according to EC Directive 71/320 - With dual-eye valve for brake and spring actuators - Test nipple for brake cylinder pressure on front right brake cylinder - One red and one yellow coupling knob - Raise/lower device mounted at rear left in direction of travel - 2 x approx. 80 l air reservoirs, steel, black painted (1x brakes, 1x raising/lowering) Lighting System - 24 Volt lighting system with large multifunction rear lights - Side marker light (LED) with reflector - Front position light, below, white, 1 pc. each left and right - 15-pin plug and socket at the front - EBS socket - Number plate lighting Floor - 28 mm hardwood floor with galvanised omega steel profiles - Hardwood floor bolted to the crossmembers - Omega profiles bolted to the front frame Painting - KTL (cathodic dip coating) with zinc phosphating plus powder coating - Chassis + front wall: MB 7350 novagrau (nova grey) Accessories - Contour marking for flatbed vehicles - Removable front wall up to 2,000 mm high with metal cladding - Holder for revolving beacon at rear Ppjdpsv Darpjfx Ahheu - SmartBoard - ECE marking board at rear - 4x extendable warning boards - Folding and extendable access ladder at rear right - 2x wheel chocks with holder - 2 rubber impact buffers on rear corners - Rear mudguard - Plastic mudguards with anti-spray mudflaps - 4 pairs of container locks with retractable twist locks, recessed into the floor, including additional crossmembers - Suitable for accommodating 1x40' and 2x20' containers - Open box made of perforated sheet metal, longitudinally in direction of travel (600 x 450 x 2,670 mm), galvanised, bolted

Durum: ikinci el, azami yük ağırlığı: 29.400 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2007, bir sonraki muayene (TÜV): 04/2026, Donanım: ABS, * 1091 - Telefonla sorular için araç kimliği * Üretici: M&V, Tip: NPSL32 * Kaz boyunlu yarı römork * ABS, EBS, BPW-Eco akslar, kampanalı frenler, havalı süspansiyon, 1. aks kaldırılabilir, 2. ve 3. aks hidrolik zorunlu yönlendirme, TRIDEC şasi, aks uzaktan kumanda ile manuel olarak yönlendirilebilir, merkezi yağlama, rampa kızak rayı * Arka kısım pnömatik olarak 1,50 m uzatılabilir * MÜKEMMEL DURUMDA, (önceki sahibine göre yaklaşık 3 yıl önce zemin yenilenmiş ve komple bakım yapılmıştır!) * Teknik olarak izin verilen toplam ağırlık: 41.000 kg * Lastik ebatı: 235/75R17,5 (9 mm) ----E-posta adresimiz: Sizin için sunduğumuz hizmetler: - Kısa süreli veya gümrük plakası temini - AB genelinde nakliye/teslimat - Üçüncü ülkelere araç gümrük işlemleri Rusça sorularınız varsa aşağıdaki numaradan arayabilirsiniz: * Yalnızca Rusça konuşanlar için WhatsApp: * Ppjdpfxoyt Alzs Ahhsu İngilizce, Almanca ve diğer diller için WhatsApp:

Durum: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.540 mm, toplam genişlik: 2.540 mm, Üretim yılı: 2026, Donanım: ABS, WEB TRAILER PRSH 27 FLATBED with hardwood floor Dimensions: Chassis width approx. 2,480 mm Chassis length approx. 13,620 mm Wheelbase approx. 7,700 mm Landing gear position approx. 2,300 mm from kingpin (for 2-axle tractors only) Ride height 1,280 mm with fifth wheel height of 1,150 mm Spring center approx. 1,300 mm Maximum kingpin load approx. 12,000 kg Axle loads: 24,000 kg Approval: CoC documents Chassis: Chassis made from welded longitudinal members and through-inserted cross members Outer frame height approx. 125 mm, 4 mm groove for lashing rings 13 pairs of lashing rings (brackets) screwed into the outer frame with groove, each rated 5t! Landing gear: 24t telescopic landing gear by branded manufacturer (Jost/SAF) Ppodsg Dkx Eepfx Ahhou Axles: Branded axles (SAF/BPW/JOST) 9t 22.5" large disc brakes, total stroke approx. 180 mm No axle lift (optional) Axle spacing approx. 1,310/1,310 mm Brakes: EBS brake system by Knorr or Wabco Air lines with red and yellow coupling heads Lifting and lowering device with 1 rotary slide valve Knorr/Wabco Air tanks 2 x approx. 80L Tire pressure monitoring Lighting: LED 15-pin front connection Flashing side marker lights Tires: Premium 385/65 R 22.5 tires on steel rims Superstructure: Steel front wall approx. 1,200 mm high, with sheet metal cladding, bolted design Floor: Weatherproof hardwood floor, 28 mm, alternately with galvanized omega steel profiles Hardwood boards screwed onto cross members (optional double screws) Floor: Certificate for tested forklift axle load 9.0t according to DIN EN 283 Attachments: Premium large contoured rear lamp panel Rear underride protection, welded (rectangular tube) Foldable and retractable rear right access ladder with platform Two wheel chocks with holders, plastic or galvanized Plastic fenders 180° over each axle Side underrun protection both sides, aluminium or plastic profile Coating: Chassis painted in RAL 9005 or Nova Grey 7350 Other colors available at additional cost (subject to powder availability) KTL with zinc phosphating plus powder coating, highest corrosion protection Hot-dip galvanizing (optional) Ex works price Attention!!! Pictures show optional extras. Get free, no-obligation advice and a personalized quote. Leasing, financing or hire purchase possible! We can accommodate your requirements! Contact us—we will gladly provide you with an offer. Errors and prior sale excepted!!!

Durum: ikinci el, azami yük ağırlığı: 34.000 kg, toplam ağırlık: 48.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2009, bir sonraki muayene (TÜV): 06/2026, yükleme alanı uzunluğu: 12.000 mm, yükleme alanı genişliği: 3.000 mm, yükleme alanı yüksekliği: 3.750 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 3.750 mm, Üretim yılı: 2009, Donanım: ABS, Langendorf SATH 30/34 model çok iyi durumda 3 dingilli havuzlu alçak şasi dorse; tekerlek oyukları, çift katlanabilir rampalar, 7.400 mm yükleme alanı, ön platform 3.650 mm, arka platform 4.580 mm, king pin'den araç sonuna kadar 14.890 mm, yaklaşık 500 mm derinliğinde havuz yatağı ve çok daha fazlası. Ekskavatörler, kamyonlar ve elbette forklift taşımak için mükemmel bir alçak şasili dorse. Pjdpfjwy E Ndjx Ahhopu

Durum: yeni, boş ağırlık: 10.100 kg, azami yük ağırlığı: 38.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, işletme ağırlığı: 10.100 kg, Donanım: ABS, Chassis: - Robust steel frame weldment with front frame cranking and flat loading surface with rear tapering approx. 500x100 mm - Neck of frame 200 mm with chamfered corners - Tapered end of gooseneck approx. 500 x 100 mm (anti-slip ribs on outer frame in the rear taper area) - 2 king pin positions with replaceable 2" king pin - Outer frame closed on the outside, perforated profile for lashing with tension straps (chains not possible) - Reinforced frame version / point load at centre of gravity - Provisions for extendable widening devices in the loading area - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle up to rear end - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underrun protection = extended end plate - Drop-down supports at the rear Ramps: - Two-part loading ramps, special version with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting device (only in combination with electro-hydraulic power pack) - Width approx. 800 mm - Timber surface - Incl. anti-slip ribs on the loading ramps - Secured in travel position with tension straps - Operation via control lever mounted at the rear, right in direction of travel - Laterally hydraulically adjustable Floor: - 35 mm larch floorboards with aluminium omega profiles Landing Gear: - Mechanical 24t landing legs with single-side operation and push compensation Axles, Steering and Tyres: - BPW air suspension axles, each with 10t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering mechanism with total lift approx. 200 mm - 2nd driving height via ball valve +50mm - 1st axle lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on the trailer - 3rd axle as friction steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, with mid-offset centering - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tyre pressure monitoring Accessories: - Plug-in side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel mounting - Lateral aluminium side impact protection - 4 wheel chocks - Elongated number plate holder in the end plate - 1 ECE panel insertable at the rear - 11 pairs of ZK modules 10t lateral: - 2x on the gooseneck - 9x on the loading surface - Steel mudguards with clear-pass Pedpfxowviwkj Ahhspu - Slidable warning panels including 3 position lamps each, at the landing legs in front and behind the end plate, continuously extendable up to loading width of 4,500 mm - 4 removable holders for warning panels plug-in into stake pockets on the loading surface - 6 pairs of side stake pockets for 100x50 mm stakes - 2 rows of transverse stake pockets for 100x50 mm stakes on the gooseneck from outer frame to the main frame (1x in front of and 1x behind king pin positions) - 3 rows of transverse stake pockets for 100x50 mm stakes on the loading surface from outer frame to main frame (1x front area, 1x in front of 1st axle, 1x behind 3rd axle) - 2 pairs of steel plates in loading surface for container locks to accommodate 1 x 20ft container - Rubber flap fitted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted DB 7