Kullanılmış Müller-Mitteltal Etü-Ta-R 11,9 Tieflader, Led, Rundum satın al (57.705)

Koşul: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 14.4 ----Braking System: * Wabco EBS * Emergency release device for spring-type actuators * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable, hot-dip galvanized drawbar (adjustable by approx. 300 mm) with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear at the front * Two mechanical, hot-dip galvanized folding supports at the rear * Hot-dip galvanized, bolted underride protection * Tool box made of galvanized sheet steel, mounted on the right-hand side * Plastic quarter mudguards * Two-step entry on the left side for easy access ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power socket * LED rear lights ----Tipper Body: * Steel pallet 3-way tipper body * Continuous top side walls with internal tube reinforcement – without central stanchions – foldable with tailboard spring assist * Tailgate both fold-down and swinging, operates via manual central locking * Hot-dip galvanized, bolted rear stanchions * 4 mm fine-grain steel floor plate * Net hooks, guide rail at the rear for loading ramps * Prepared for later retrofit with side wall extensions ----Chassis: Guodev Dz N Nepfx Ai Deb * Hot-dip galvanized chassis ----Load Securing: * 1 x 5 t lashing point in each corner and 4 x 3 t lashing rings recessed into outer frame on each side ----ALU Loading Ramps: * 1 pair of aluminum loading ramps (approx. 3,570 x 400 mm, load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps, installed in the chassis under the loading platform at the rear ----Tires: * Tires 385/55 R 22.5 ----Paintwork: * Axles, springs, air tanks, and landing gear painted black * Chassis, drawbar, floor, front wall, and folding supports hot-dip galvanized * Body side panels painted in customer-specified RAL color (no special or metallic finishes), color change possible until approx. 6 weeks before completion ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle, unregistered, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 29/2026

Koşul: yeni, azami yük ağırlığı: 31.900 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: Guodsylfvmjpfx Ai Deb * Straight drawbar with 50 mm towing eye and continuously adjustable height setting ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required * SmartBoard as infotool with pressure sensors for axle load indication per axle group * 15-pin electrical connector * LED rear lights * LED beacon (removable) at the rear ----General attachments: * Warning sign packages front & rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, mounted right side * Front closed plastic single mudguards * Rear straight steel mud aprons each with spray protection (spray mist suppression) * Side underrun protection ----Low-loader platform: * Turntable platform extended by 520 mm with 45° corners and 3 recessed storage compartments including covers, lockable * Floor on turntable platform made of 50 mm and on low-loading platform of 60 mm softwood * 20 mm rubber overlay instead of wooden floor in trackway area, with a low-bed length of 6,780 mm including approach ramp * Rubber overlay on the approach ramp left and right, approx. 860 mm long * Each side with 4 pocket stakes (no stakes included) with simultaneous 2-ton lashing capacity each ----Chassis: * Chassis made of high-strength fine grain steel ----Load securing (Lasi package): Turntable platform: * 2 pairs of 13.4 ton lashing eyes in the outer frame of the turntable platform Low-bed: * Each side with 4 pairs of 10 ton drop-down lashing rings on the outer frame, loadable in all directions * Rear sides each with 2 pairs of 13.4 ton swing-out lashing rings ----Ramps: * Rubber overlay on folding loading ramps * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shift & load holding valves ----Rear support: * Hydraulic rear support ----Wideners: * 8 pairs of galvanized folding outriggers for 3 meters overall width (not included on the rear slope) * Widening planks stored in a compartment left side ----Digger stick recess: * Digger stick recess over the rear axle up to the end of approach ramp, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 ton lashing rings in the digger stick recess on each side ----Hydraulics: * Hydraulic flow divider in the trailer (with truck hydraulic pump output over 40 – max. 120 l/min) ----Loading dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm approach ramp) * Loading area above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape, sides and rear * Chassis, turntable, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images may include special equipment ----Delivery time: * Vehicle is expected to be available from week 23/2026

Koşul: yeni, azami yük ağırlığı: 31.900 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: Gujdpfx Asylfvgji Dsb * 4 x 11 ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height setting ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required * SmartBoard as infotool with pressure sensors for axle load indication per axle group * 15-pin electrical connector * LED rear lights * LED beacon (removable) at the rear ----General attachments: * Warning sign packages front & rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, mounted right side * Front closed plastic single mudguards * Rear straight steel mud aprons each with spray protection (spray mist suppression) * Side underrun protection ----Low-loader platform: * Turntable platform extended by 520 mm with 45° corners and 3 recessed storage compartments including covers, lockable * Floor on turntable platform made of 50 mm and on low-loading platform of 60 mm softwood * 20 mm rubber overlay instead of wooden floor in trackway area, with a low-bed length of 6,780 mm including approach ramp * Rubber overlay on the approach ramp left and right, approx. 860 mm long * Each side with 4 pocket stakes (no stakes included) with simultaneous 2-ton lashing capacity each ----Chassis: * Chassis made of high-strength fine grain steel ----Load securing (Lasi package): Turntable platform: * 2 pairs of 13.4 ton lashing eyes in the outer frame of the turntable platform Low-bed: * Each side with 4 pairs of 10 ton drop-down lashing rings on the outer frame, loadable in all directions * Rear sides each with 2 pairs of 13.4 ton swing-out lashing rings ----Ramps: * Rubber overlay on folding loading ramps * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shift & load holding valves ----Rear support: * Hydraulic rear support ----Wideners: * 8 pairs of galvanized folding outriggers for 3 meters overall width (not included on the rear slope) * Widening planks stored in a compartment left side ----Digger stick recess: * Digger stick recess over the rear axle up to the end of approach ramp, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 ton lashing rings in the digger stick recess on each side ----Hydraulics: * Hydraulic flow divider in the trailer (with truck hydraulic pump output over 40 – max. 120 l/min) ----Loading dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm approach ramp) * Loading area above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape, sides and rear * Chassis, turntable, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images may include special equipment ----Delivery time: * Vehicle is expected to be available from week 23/2026

Koşul: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, * TRA-Kombi 18.0: * 3-in-1 functionality: suitable for roll-off containers, skip containers, and as a low loader ---- Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release for spring-loaded cylinders ---- Axles: * 2 x 12 t Gigant axles ---- Suspension: * Parabolic springs ---- Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and height adjustment mechanism ---- Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS display capability in the truck via EBS signal (no truck-side installation required) ---- General Attachments: * Toolbox made of powder-coated steel sheet, mounted on the right side * Side underrun protection * Quarter plastic mudguards with spray protection * Storage box for container nets, made of galvanized sheet metal, approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic bump stops * Mechanical drop-down supports at rear --- Loading Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide roll-off containers * Steel floor plate with roller recesses in the bogie area * For roll-off container transport, possible container lengths from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking as well as mechanical plug-in stop angles at the front in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Including 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops often with swiveling stops * Welded seam as anti-slip coating in the ramp area Guodpfx Asl Thwcji Dsb ---- Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning elements for positive and non-positive securing of skips * 4 lashing brackets in cloverleaf design on each side * 1 pair of 13.4 t UVV lashing rings at the front ---- Ramps: * 1 pair of aluminum approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at rear) ---- Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible total weight of up to 20,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to errors and intermediate sale ---- Delivery Time: * Available from approx. calendar week 44 / 2026

Koşul: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, * TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and adjustable height mechanism ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector Godpol Thv Rjfx Ai Dsub * TPMS (Tire Pressure Monitoring), display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Tool box made of powder-coated sheet steel, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets made of galvanized sheet metal, approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic impact buffer * Mechanical drop-down supports at the rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll containers * Steel floor with wheel recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point locking clamps and mechanically insertable front stops in the rail, cargo securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a max. volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops inserted with pivoted stop * Weld bead as anti-slip coating in the run-up ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning equipment for positive and frictional securing of skips * 4 lashing cleats each in cloverleaf design (side) * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminum approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible total weight of 20,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. CW 44 / 2026

Koşul: ikinci el, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2016, Donanım: ABS, Johanning's Nutzfahrzeuge'ye hoş geldiniz, genç ve seçkin ikinci el araçlar konusunda uzmanınız. Hemen teslim! Teslimat mümkündür. Fiyat talep üzerine! Finansman ve kiralama seçenekleri talep üzerine mümkündür. Gusdpfeycpd Ajx Ai Dsb Konum: 39606 Osterburg Marka: Mueller Mitteltal Model: TA-2 / ETUE-TA-R 11,9 Yıl: 2016 Boş ağırlık: 3.250 kg Muayene: Mart 2026 dinamik muayene: Eylül 2026 Genişlik: 2,47 m Uzunluk: 6,20 m Yükseklik: 90 cm Daha fazla fotoğraf veya video için lütfen talepte bulunun. Johanning's Nutzfahrzeuge – seçkin ve genç ikinci el araçlar için ortağınız. Hizmetlerimiz – Sizin avantajlarınız (satış sonrası) - Aracınızın durumu ne olursa olsun takas imkanı - Aracınızın ücretsiz anında kayıttan düşülmesi - 150 €'ya tescil hizmeti (ücretler ve plakalar dahil) - Kısa süreli tescil - Her zaman telefonla randevu alarak inceleme ve test sürüşü mümkün - Anlaşmaya göre kapıya teslimat mümkündür. Yanlışlık ve ara satış hakkı saklıdır.

Koşul: ikinci el, azami yük ağırlığı: 13.900 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2008, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 850 mm, yükleme alanı hacmi: 10 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 2.580 mm, Üretim yılı: 2008, Donanım: ABS, Müller-Mitteltal Three-way Tipper 2-Axle Tandem Trailer VIN: 051973 Gedpfjy H Tryox Ai Doub Chassis / Attachments: * Air suspension * 2 x BPW Eco Plus axles with drum brakes * Tires: 385/65 R 22.5 * Remaining tire tread: Front approx. 20/80%, Rear approx. 30/80% * Fixed underrun protection * Drawbar with 50 mm eye * 1 x Jost support leg on the drawbar Body: * Müller-Mitteltal three-way tipper * Aluminum side boards, 850 mm * Bulkhead and tailgate 960 mm * Approx. 10 m³ * Pallet-wide Weights: * Gross weight 18,000 kg * Payload 13,900 kg * Unladen weight 4,100 kg Other: * German registration * * Safety inspection 03/2027 * 1 previous owner New main inspections / safety checks or reductions/increases of weights are possible upon request. We are happy to assist you in obtaining export/transfer license plates and can also arrange for the transfer of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English, and Russian! No liability for printing or typographical errors. Subject to changes, prior sale, and errors! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in reconditioning and trading commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in the sale of new and used commercial vehicles. On 11,000 m², you will find a large selection of vehicles. Our company philosophy is characterized by fairness and integrity. Customer satisfaction is extremely important to us, which is why we offer our customers an excellent all-round service package and provide a competent contact person to assist them with the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We will gladly assist you with loading your purchased vehicles. Organizing special transport We are happy to help you organize special transports. Temporary/export license plates We will gladly assist you in procuring export/temporary license plates. Handling customs formalities We will gladly assist you with customs matters.

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/1993, Üretim yılı: 1993, Donanım: ABS, - EBS Daha fazla bilgi için lütfen bizimle iletişime geçin. Gusdpfx Aijxt Rw Rs Dob

Koşul: ikinci el, boş ağırlık: 2.700 kg, azami yük ağırlığı: 7.300 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2006, yükleme alanı uzunluğu: 4.500 mm, yükleme alanı genişliği: 2.200 mm, yükleme alanı yüksekliği: 1.000 mm, süspansiyon: çelik, lastik boyutu: 245/70R19.5, renk: turuncu, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, steel body, leaf suspension, 2 axles, BPW axles, tandem, lashing rings, underrun protection, front support, swing tailgates. Gedoytxx Repfx Ai Djub Body: 3-way tipper trailer, steel drop sides, swinging and folding, 2x BPW axles, drum brakes! Loading height approx. 1040 mm. Drop sides foldable at both top and bottom! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Koşul: ikinci el, azami yük ağırlığı: 13.860 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2022, yükleme alanı uzunluğu: 6.770 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 600 mm, yükleme alanı hacmi: 10 m³, Donanım: ABS, ? galvanizli şasi ? alçaktan bağlı ? 50 mm çekme halkası ? konteyner kilidi ? her iki tarafta 12 bağlama halkası ? geri görüş kamerası ? kampana fren ? duomatic bağlantı ? ABS ? havalı süspansiyon Godpfexb Ig Ssx Ai Dsub ? alet kutusu ? EBS ? destek ayakları ? ikiz lastik ? BPW akslar Tüm bilgiler taahhütsüzdür / ara satış hakkı saklıdır.

Koşul: ikinci el, azami yük ağırlığı: 13.860 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2022, yükleme alanı uzunluğu: 6.770 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 600 mm, yükleme alanı hacmi: 10 m³, Donanım: ABS, ? Galvanizli şasi ? Alçak bağlantı ? 50 mm çeki halkası ? Konteyner kilitleme ? Her iki tarafta 12 sabitleme halkası ? Geri görüş kamerası Gujdpexb Iglsfx Ai Dob ? Kampana fren ? Duomatic bağlantı ? ABS ? Havalı süspansiyon ? Takım sandığı ? EBS ? Destek ayakları ? İkiz tekerlekler ? BPW akslar Tüm bilgiler taahhütsüzdür / Ara satışa tabidir.

Koşul: ikinci el, azami yük ağırlığı: 7.100 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2007, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 1.100 mm, toplam genişlik: 2.550 mm, Araç / Üst yapı: Tandem üç taraflı damper İlk tescil: 07/07 Toplam ağırlık: 10.000 kg Boş ağırlık: 2.900 kg Taşıma kapasitesi: 7.100 kg Toplam uzunluk: 6.900 mm Yükleme uzunluğu: 5.000 mm Genişlik: 2.550 mm / yaklaşık yükleme genişliği 2.450 mm Yükleme yüksekliği: yaklaşık 1.100 mm Diğer bilgiler - 40 km/s Gjdpfx Aioyz H Aze Dsub - 500 mm yan paneller - 500 mm galvanizli ön ek - Yük yüzeyinde 7 çift sabitleme halkası - Üst yapı dışında 4 çift sabitleme halkası - Destek ayağı - Arka destek - Yan panel kaldırma yayı - Opsiyonel rampalar 1.280,00 €

Koşul: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height increases by +30 mm when lifted) * Last axle steered (axle steering lock for maneuvering can be engaged from the driver’s cab without truck-side installation or additionally via a switch on trailer). The lock must be disengaged before entering public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (requires truck-side installation), with speed-dependent activation via EBS control ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring system, displayable in truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * Removable LED beacon at the rear ----General Attachments: * Mechanical warning sign package for 3 m total width * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, mounted left side * Front plastic mudguards and rear galvanized steel mudflaps ----Low Loader Deck: * Gooseneck turntable platform with 45° corners and 3 storage compartments with lockable folding lids (rear-opening) * Shortened lowbed platform by 500 mm to 6,280 mm including extended stepped contour, 500 mm forward * Rubber lining on folding frame, drive-on slope and load-bearing surface on the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing points per side (front & rear corners) * 5 x 10 t UVV lashing rings per side (pivoting, retractable, loadable in all directions) * 4 stake pockets per side, also providing 2 t lashing capability each * 1 x 16 t UVV lashing point on the rear traverse ----Widening: * Extendable and foldable extension arms for up to 3 m total width (deck board holder under the chassis, right side) ----Excavator Stick Recess: * Fully continuous, reinforced profile from last axle to rear cross member. Approx. L=2,350 x W=770 x D=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides Gujdpfxjl Tihuj Ai Deb ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for truck hydraulic pump outputs over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Load area above turntable: 2,600 + 390 x 2,520 mm * Lowbed area: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Paintwork: * Chassis, turntable, drawbar, extension consoles, and loading ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Notes: * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: Immediately available*

Koşul: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring brake chambers * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm with axle lifted) * Last axle with trailing steering (lockable from cab for shunting without truck-side installation, additionally lockable via switch on the trailer). Lock must be deactivated before entering public roads. * Forced relief as well as forced lowering of lift axle for manoeuvring purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon at rear ----General Attachments: * Mechanical warning sign kit for 3 m overall width * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, on left side * Plastic fenders at front axle, galvanized sheet steel fender skirts at rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear) * Shortening of the low-loader platform by 500 mm to 6,280 mm including extended offset bending by 500 mm to the front * Rubber coating on folding frame, approach slope, and running surface of low loader platform * Bamboo timber between longitudinal beams in front of excavator stick rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings in the front corners * 2 x 13.4 t UVV lashing points front and rear on each side * 5 x 10 t UVV lashing rings on each side (pivoting, lowerable, and loadable from all directions) * 4 stake pockets per side, each with 2 t lashing option * 1 x 16 t UVV lashing point at rear cross member ----Widening: * Extendable and foldable widening arms for 3 m overall width (plank holder under the chassis on front right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on the side in the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and deployable pointed section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump performance in truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Deck Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope ----Paintwork: Guodpfx Aisxptn Dj Djb * Chassis, turntable, drawbar, widening consoles, access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: Available immediately*

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2005, renk: siyah, Üretim yılı: 2005, Donanım: ABS, - Stepne - Çift tekerlek dingili Godpfjxw T Uaox Ai Doub

Koşul: ikinci el, dingil konfigürasyonu: 1 dingil, ilk tescil: 08/1993, Üretim yılı: 1993, Donanım: ABS, - EBS Gedpfx Aoxt Sl Nsi Dsub Daha fazla bilgi için lütfen bizimle iletişime geçin.

Koşul: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2025, * T3 Profi 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Rear swing-out supports mounted to chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic fenders; rear axle: straight galvanized steel skirts, each with spray guards * Reflective contour marking tape on sides and rear * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Foldable lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Towing bracket with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pole power plug * 4 stake pockets per side (no stakes included), with integrated lashing options Godpel Th I Aefx Ai Djub * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed into the outer frame – rated at 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3 m total width (not on the rear slope) * Widening planks stored in the center of the loading area * Hot-dip galvanized monobloc hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally * 4-way control block for retrofit of hydraulic side ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach ramp) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technically permissible total weight: 30,000 kg * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from calendar week 11/2026

Koşul: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0: * EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical rear axle compensation * Side underrun protection * Swing-type supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel sheet skirts, each with spray protection * Reflective contour tape on sides and rear * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Foldable lid (hot-dip galvanized) for the toolbox in the bogie platform * Multi-voltage electrical system * LED tail lights * Rear removable beacon * Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included), can also be used for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 6 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and integrated in the outer frame – in the corners rated at 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for a 3 m overall width (not at the rear taper) Gujdpfx Aiol Th Nne Dsb * Widening planks stored in the center of the loading area * One-piece hot-dip galvanized hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Four-way control block for retrofitting hydraulic lateral ramp displacement * Platform over fifth wheel: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear platform: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technically permissible gross weight: 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 11/2026

Koşul: yeni, azami yük ağırlığı: 13.490 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, TRA-Kombi 18.0: * 3-in-1 – suitable for hooklift, skip containers, and as a low-loader ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5-ton axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment mechanism ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System), displayable in truck via EBS signal (no truck-side installation required) * LED tail lights 12/24 V * 15-pin electrical connector ----General Attachments: * Tool box made of powder-coated steel plate * Spare wheel carrier in basket design on right-hand side * Enclosed side underrun protection * Quarter mudguards with splash guards made of plastic * Plastic rear impact protection buffers * Folding A-board at rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame to guide roll containers * Steel plate floor with roller recesses in the bogie area * Suitable for hook lift container transport, container lengths from 5,500 – 7,000 mm * Pneumatic four-point clamping lock and mechanically inserted front stops in the guide rails * Transport of up to 2 skip containers with max. 10 m³ possible * Eight repositionable skip stops for side centering. The front four can be inserted and are pivotable. * Weld seam as anti-slip coating in the inclined ramp area * Mechanical rear drop-down supports Guedpfjwb Rakjx Ai Dob ----Load Securing: * 3 pairs of 10-ton UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of skips; each side with 4 cloverleaf lashing brackets * 1 pair of 13.4-ton UVV lashing rings facing towards the front * Four 8-ton lashing eyes per side integrated into the outer frame ----Ramps: * Aluminium loading ramps (10.6 ton/pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Painting: * Reflective contour tape, sides and rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible gross weight of 20,000 kg technically possible * New vehicle, unregistered, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egstorf

Koşul: yeni, azami yük ağırlığı: 10.970 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, KA-TA-R 14,4 - Kamyon Tandem Üç Yana Devirmeli Dorse Gjdpfexmwiyex Ai Doub - Seride taşıma kapasitesi yakl.: 11.050 kg - 285/70R19.5 lastik ile toplam ağırlık 14,4 tona yükseltilebilir - İç ölçüler: 5.000 x 2.420 x 500 mm - Yüklü zemin yüksekliği 1.040 mm - 1 adet sıcak daldırma galvanizli şasili ve alt korumalı gövde - Boya: Akslar, yaylar ve hava tankı vb. siyah renkte - Çelik zeminde gömülü ve katlanabilir 3 çift yük sabitleme halkası, LC 3.000 daN - ABS 2 S/2 M, 24 Volt - 500 mm yüksekliğinde çelik yan kapaklar için 2 yay kaldırıcı - Sol ve sağda, bölünmemiş yan duvarlarda salınımlı 1 merkezi kilit Opsiyonel donanımlar: Çelik zemine gömülü 1 çift UVV sabitleme halkası, zeminin üstünde değil 4 mm kalınlığında Hardox 450 çelik taban Standart yerine kranklı dişli ile çekme kolu yükseklik ayarı 1 çift kenarsız alüminyum yükleme rampası (8,0 t/çift), 3.500 x 400 x 105 mm, lastikli ve paletli araçlar için uygun Alet kutusu

Koşul: ikinci el, ilk tescil: 11/2006, Üretim yılı: 2006, MÜLLER - MITTELTAL T4 Kompakt Döner Tabla - Alçak Şasi Dorsesi, havalı süspansiyon ve teker çukuru ile - 4 x havalı süspansiyonlu GIGANT aks - havalı süspansiyonlu - 4 x teker çukuru - mekanik rampa - arkada 2 destek, katlanabilir - uzatılabilir uyarı levhaları - ABS - MICHELIN lastikler: 235/75 R 17.5 - ağır model: 40.000 kg azami yüklü ağırlık - boş ağırlık: 8.400 kg - toplam uzunluk: 11.750 mm - 50 mm çeki halkası Özellikle kalk freze makineleri taşımak için uygundur! Gedpfx Aijwmpbde Djub - Alman römorku - Muayene / teknik kontrol istek üzerine ve ek ücretle mümkün! Hata ve ön satış hakkı saklıdır!

Koşul: yeni, azami yük ağırlığı: 8.750 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Inquiry number: 11599 * NEW VEHICLE now immediately available in stock at Alsdorf * Versatile use: construction, landscaping, agriculture and forestry – can be used as tipper or low-loader Müller-Mitteltal KA-TA-R 11.9 Tandem Low-Loader Three-Way Tipper Trailer with Ramps * Tyres: 385/55 R19.5, (4 units), BPW axles, parabolic springs, drum brakes * Tyre pressure monitoring * GVW: 11,900 kg, payload 8,750 kg. * EBS multi-voltage system for towing vehicles with 12 and 24 volt electrics (e.g., agricultural and forestry vehicles) * Side marking lights with integrated turn signal function * LED lighting system for 12+24 volts, with 1x 15-pin connection cable and an additional connection cable as standard, configuration 12 volt 13-pin with empty sockets for both electrical connectors * Galvanised floor, 5m x 2.42m x 0.5m, laser-welded sidewalls, swinging, folding and removable, pre-fitted for later installation of sidewall extensions * Lockable compartment under the tipping body for loading ramps * Includes aluminium ramps, 8t load capacity, 3.57m long, stowed in ramp compartment beneath the tipper body * Front wall hot-dip galvanised * 4 UVV tie-down rings LC 5000daN front and rear + 8 recessed, folding tie-down lugs LC 3000daN in the tipper floor (centred) * Continuously height-adjustable tow bar, hot-dip galvanised, towing eye 40mm Gsdpsyhtwwefx Ai Dsub * Net hooks * Bolted, galvanised rear stanchions * ---- * We are a Müller-Mitteltal distributor! Request a quote from us! * Example: €519 net per month for 60 months, no down payment, no residual value. An offer from our finance partner FM LeasingPartner ----Our business hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Available outside business hours by appointment We speak German, we speak English, mowimy po polsku, on parle francais, WhatsApp Leasing, financing, trade-in possible----

Koşul: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes Gsdjl Tlhrjpfx Ai Djub * 4 x 11 t Gigant axles * Air suspension with lift and lower system and RtR valve * Pressure gauge scale for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: plastic quarter mudguards with splash protection * Rear axle: straight, galvanized steel sheet skirts with splash protection * Reflective contour tape on the sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12/24 V * Removable LED rotating beacon at the rear * 2 LED reversing lights (activated by reverse gear) * Drawbar with 50 mm towing eye and height adjustment * Tool box made of galvanized, black powder-coated steel sheet, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip covering on the steel plate of the turntable platform * Load securing package consisting of: 1 x 13.4 t UVV lashing eye on left and right in front of the front wall support, 4 holes on each side of the turntable platform with 2 t lashing capacity each, 1 pair of lashing eyes (13.4 t) hanging at the rear left & right in front of the rear support, 4 pairs of UVV lashing rings (10 t) per side, pivoting and lowerable, loadable in all directions and integrated into the outer frame, 3 stake pockets per side with simultaneous 2 t lashing option * Hot-dip galvanized mechanical folding outriggers for 3 m total width (not at the rear bevel) * Beam holder for extensions under the chassis on the left, longitudinally * Excavator arm holder above the rear axle up to the end beam, approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 t lashing eyes per side in the excavator arm holder * Hardwood floor on the running surfaces of the low-loader platform * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) mechanically adjustable laterally * Outer beams of the loading ramps made of hardwood * Steel construction prepared for 6-control valve block * Loading edge unloaded approx. 950 mm +/- 20 mm chassis * Turntable, folding outriggers, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tank, drawbar painted in a black tone-- * Tyres 235/75 R 17.5 * Vehicle has a one-day registration in 07/2024 due to missing tire pressure monitoring system and was never loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system, including RtR valve * Manometer pressure gauge for load weight determination (axles separated into two air suspension circuits) * Side underrun protection * Swing-out support legs at the rear of the chassis frame * Mechanically adjustable warning sign kits at front and rear * Front axle: plastic quarter mudguards with splash protection * Rear axle: straight galvanized steel mud flaps with splash protection * Reflective contour tape on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at the rear * 2 LED reversing lights (activated via reverse gear) * Drawbar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of the turntable platform, approx. 490 mm long with 45° corners Gsdpfx Ajl Tnu Asi Djub * Robot-welded anti-slip covering on the steel plate of the turntable platform * Load securing package consisting of: in front of the bulkhead carrier left & right each 1 x 13.4 t UVV lashing ring, on each side 4 holes in the turntable platform with 2 t lashing force each, 1 pair of lashing rings (13.4 t) suspended at the rear left & right in front of the rear cross member, on each side 4 pairs of swiveling and lowerable UVV lashing rings (10 t), loadable in all directions and recessed in the outer frame, on each side 3 stake pockets with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical fold-out extensions for 3 m overall width (not in the rear slope area) * Plank holder for extensions under the chassis left, longitudinal orientation * Excavator stick rest, from rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep, on each side 2 pairs of 6.4 t lashing rings in the excavator stick rest * Hardwood flooring on the running surfaces of the low loader platform * Hydraulically operated single-piece loading ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable * Outer planks of the loading ramps made of hardwood * Steel structure pre-manufactured for 6-way control valve * Loading edge height unladen approx. 950 mm +/- 20 mm chassis * Turntable, fold-out extensions, mechanical supports, loading ramps all hot-dip galvanized * --Axles, air tanks, drawbar painted in black-- * Tyres: 235/75 R 17.5 * The vehicle has a day registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available immediately ex Egestorf

Koşul: ikinci el, boş ağırlık: 3.260 kg, azami yük ağırlığı: 7.240 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2008, yükleme alanı uzunluğu: 7.100 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.600 mm, toplam uzunluk: 2.550 mm, toplam genişlik: 3.750 mm, süspansiyon: hava, lastik boyutu: 245/70 R 19,5, renk: gri, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden. ABS (anti-lock braking system), air suspension, 2 axles, BPW axles, tandem, curtainsider, lashing rings, lift and lower function, through-loading system, height-adjustable towing bar. Gujdpfsi Rpxaox Ai Dsb Body: Through-loading via portal doors at the front, sliding mechanisms, tailgate with roller tarpaulin, drum brakes. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted!