Kullanılmış Müller-Mitteltal Ka-Ta-R 14,4 Breitreifen, Rampen satın al (56.952)

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS Brake System * Drum Brakes * BPW Axle * Parabolic Springs * Front Support Winch * Spring-assisted square tube supports at the rear with baseplate and safety locking pins for different support heights * Drawbar with 40 mm bolt-on towing eye (height adjustable, mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubular steel and cross members * Enclosed steel mudguards with splash protection * Enclosed side underrun protection, suitable as advertising space * Plastic toolbox with floor insert (installed lying down), approx. 500 x 350 x 400 mm * Swiveling cable drum structure, light width between drum arms 1,700 mm, with clamp lock for securing the drum at the ends of the support arms, as well as central claw lock for fixing the cable drum structure to the chassis Dkedpfx Adou I Iqfjdel * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated friction rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, with centering and rotating ends * 1 pair of stepwise graduated centering cones made of polyamide * Hydraulic pump unit with Loncin petrol engine, including hand and electric starter * Fuel tank and hand starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * Unladen weight 2,690 kg * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Available immediately ex Egestorf * Sample images

Koşul: yeni, azami yük ağırlığı: 6.900 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Support windlass at the front * Spring-assisted square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm screwed towing eye (height adjustable mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and crossbeams * Closed fenders made of sheet steel with splash guards * Closed side underrun protection can be used as an advertising area * Plastic toolbox with base inlay (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum frame, clear width between the drum arms 1,700 mm with tension latch for drum securing at the support arm ends and a central claw lock securing the drum frame to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering and rotating ends * 1 pair of stepwise offset centering cones made of polyamide * Hydraulic lines supply and return * Chassis and hydraulic preparation for retrofit of a separate engine * 315/80 R 22.5 tires * Unladen weight: 2,690 kg * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and intermediate sale excepted * Immediately available ex Egestorf Dksdpfexyniwsx Addsl

Koşul: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring * Emergency release device for spring-actuated cylinders * Drum brakes Dkjdpfxol Tihxs Addol * 2 x 11 ton Gigant axles * Air suspension with lifting and lowering function * Fixture in front of the bulkhead and rear slant for retrofitting container locks for transporting 20" containers * Drawbar with 50 mm flange tow eye and height-adjustable drawbar * Jost landing gear at the front * External folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED lights * 21 ton GVW design with reinforced frame and reinforced axles * Reinforcement package on the chassis for drill rig transport * 50 mm softwood floor, clamped design * Fixture on the front bulkhead for optional retrofitting of container locks * Bolted smooth steel sheet front wall * Split, trapezoid-profiled steel side walls, foldable with middle drop-in stanchion * Steel rear wall, can be inserted between the ramps – storage bracket inside the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45° angled, with 2 ton lashing capacity every 480 mm * Option for installing 3 ton folding lashing brackets every 600 mm * Profifix lashing rail centrally along vehicle axis for lashing up to LC 3000 daN * In each corner front and rear: 1 x 10 ton lashing ring * Lashing package with 2 x 8 ton retractable lashing rings per side in the outer frame, various drillings in the front and rear crossmember for 1.2 ton lashing options * One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (collapsible down to 20 mm) * Rear ramp angle approx. 860 mm chassis height * Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black tone * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Side wall paintwork in a RAL color of your choice (no special or metallic colors), changeable up to approx. 6 weeks before completion * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 29 / 2026

Koşul: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 19.0: * Wabco EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 10 t BPW Eco axles * Parabolic springs - 110 mm wide - with tandem equalizer assembly * Drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing gear at front * Rear foldable external support legs * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolt-on flat steel bulkhead * Side walls made of trapezoidal-profile steel sheeting, fold-down with drop-side spring lift assist * Steel rear wall, slidable between the ramps, storage mount inside front bulkhead when not in use * Rear stanchions bolted * Perforated outer frame, approx. 45° edged, with 2 t lashing capacity every 480 mm * Option to fit 3 t fold-down lashing rings every 600 mm * In each corner, front and rear, 1 x 10 t lashing ring, multiple holes in the bulkhead and end cross member for 1.2 t lashing points * Profifix lashing rail along the centre axis for lashing capacity up to LC 3000 daN * One-piece mechanical grating ramps with spring mechanism for single-man operation, approx. 2,750 x 620 mm (can be compressed to 20 mm) Dsdpfx Asl Th Hwjddskl * Rear approach wedge approx. 860 mm * Chassis, drawbar, bulkhead, rear wall, ramps and support legs hot-dip galvanized * Body side walls painted RAL 9010 pure white * Side walls can be painted in any RAL color for an additional charge * Axles, springs, air tanks, flange eye and landing gear painted in black * New vehicle with full manufacturer warranty * Subject to errors and prior sale * Available approx. from calendar week 21/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 19.0: * Wabco EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10 t BPW Eco axles * Parabolic springs – 110 mm wide – with tandem equalizing unit * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at front * External folding supports at rear * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * 50 mm softwood floor * Fixture in front of bulkhead for retrofitting container locks * Bolted flat plate bulkhead * Trapezoidal-profiled steel side panels, foldable with drop side spring assist * Steel rear wall, retractable between the ramps – bracket for storage in the front bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option to fit 3 t recessed lashing rings every 600 mm Dsdpfx Ael Th Hljddokl * In each front and rear corner 1 x 10 t lashing ring, various holes for 1.2 t lashing options in front and rear crossmembers * Profifix lashing rail along center axis for securing up to LC 3000 daN * One-piece mechanical grating ramps with spring mechanism suitable for single-person operation, approx. 2,750 x 620 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, rear wall, loading ramps, and folding supports hot-dip galvanized * Side panel painting in RAL 9010 pure white * Painting in other RAL shades available on request for additional charge * Axles, springs, air tank, flange towing eye, and landing gear painted black * New vehicle with full manufacturer’s warranty * Errors and prior sale excepted * Available approx. from calendar week 21/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system (TPMS) * Emergency release device for spring-actuated cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lift and lowering device * Drawbar with 50 mm flange towing eye and height adjustment of 110 mm by offset plate * Jost landing gear at front * External folding supports at rear * Plastic toolbox, approx. 750 x 350 x 300 mm, on right side * Lateral underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Multi-chamber tail lights * Reinforcement package for drilling rig transport on chassis * 50 mm softwood floor, clamped design * Preparation in front of bulkhead for retrofitting container locks * Bolted front wall made of smooth panel * Split side walls made of trapezoidal-profiled steel sheet, foldable, with central folding stanchion * Steel rear wall, can be slid in between ramps—bracket for stowage when not in use, mounted inside front wall * Rear stakes bolted * Perforated outer frame, approx. 45° bent with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm * Lashing package: in each corner front and rear 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV retractable lashing rings in outer frame, multiple holes in front and rear cross beam for 1.2 t lashing possibilities Dkjdpjmi Tmasfx Addsl * One-piece slide-in ramps, 12 t per pair, approx. 2,750 x 620 mm * Rear approach slope approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports and access ramps hot-dip galvanized * ---Axles, air tanks, flange towing eye and landing gear painted black--- * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering system * Tow bar with 50 mm flange eye and height adjustment of 110 mm via offset plate * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical socket * Multi-chamber tail lights * Reinforcement package on chassis for drill rig transport * 50 mm softwood floor in clamped version * Pre-fitted equipment for retrofitting container locks in front of bulkhead * Bolt-on bulkhead made of smooth sheet metal * Split side walls, steel sheet - trapezoidal profile - foldable with central folding stake * Rear wall, steel, slide-in type between ramps - bracket for storage in front of bulkhead when not in use * Rear stakes bolted * Perforated outer frame approx. 45° angle, with 2 t lashing capacity every 480 mm * Option to install 3 t drop-forged lashing rings every 600 mm * Load securing package (Lasi): front and rear corners each equipped with 1 x 10 t UVV lashing ring, sides each with 2 x 8 t UVV retractable lashing rings in outer frame, multiple holes in bulkhead and end crossmember for 1.2 t lashing points * One-piece slide-in ramps, 12 t / pair, ramps approx. 2,750 x 620 mm * Rear access ramp approx. 860 mm Dedpfx Aemi Tcqeddekl * Chassis, tow bar, bulkhead, tailgate, folding supports and loading ramps hot-dip galvanized * ---Axles, air tanks, flange eye and landing gear painted in black--- * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release device for spring-actuated cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Towing Eye / Flange Tow Eye: * Towing bar adjustable in height by 300 mm * 40 mm flange tow eye Dedpfx Aol Th Nroddskl ----General Attachments: * Jost landing gear front * Exterior folding support legs at the rear * Plastic toolbox, front right, mounted externally on the front wall * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform 5.37 m * 50 mm softwood floor * Bolted front wall made of smooth sheet metal * Drop sides made of trapezoidal-profiled steel, foldable with drop side spring assist * Steel rear wall, slide-in panel between ramp holders - stowed in front of the front wall when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, angled approx. 45 degrees with 2 t lashing capacity at 480 mm intervals * Option to equip with 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Approach slope at the rear approx. 860 mm chassis height ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, tailgate, folding supports, and access ramps hot-dip galvanized * Axles, springs, air tanks, 40 mm flange tow eye painted in black * Sideboard painted RAL2011 deep orange * Painting of side panels in any RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * Drawbar with 300 mm adjustable height * 40 mm flanged towing eye ----General Attachments: * Jost mechanical landing gear at front * Externally mounted, hot-dip galvanized folding supports at rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted externally on the front wall ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin electrical connector * LED tail lights ----Cargo Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted smooth sheet steel front wall * Drop sides made of trapezoidal steel sheet, foldable, with drop-side spring assist * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated external frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Option to install 3 t swing lashing rings every 600 mm (5 lashing rings mounted on each side) * One 6.3 t lashing ring in each of the four corners front and rear * Various holes in the front and rear crossmembers for 1.2 t lashing options ----Ramps: Dkedpel Thy Refx Addsl * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear access, storage compartment below loading platform integrated into the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall * Dropside colour in RAL 9010 pure white * Painting of sidewalls in an RAL colour at additional cost possible ----Information: * New vehicle, unregistered * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system Dodpsl Th Ncsfx Addekl * Emergency release system for spring brake cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Height-adjustable drawbar, 300 mm range * 40 mm flange towing eye ----General Attachments: * Jost landing gear at the front * External foldable support legs at the rear * Plastic toolbox, front right, mounted externally on the front bulkhead * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ (tyre pressure monitoring) * LED lighting ----Loading Platform: * Loading length 5.37 m * 50 mm softwood floor * Bolted front bulkhead made of smooth sheet steel * Drop sides made of trapezoidal profiled steel, foldable, with drop side spring assist * Rear wall made of steel, can be slid between the ramp holders forward of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * One 6.3 t lashing ring in each front and rear corner * Various holes in front and end crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical steel grating ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Approach slope at rear approx. 860 mm chassis height ----Tyres: * 235/75 R 17.5 tyres ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, bulkhead, tail gate, support legs, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flange towing eye painted black * Drop sides painted in RAL2011 deep orange * Sides can be painted in any RAL color at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex works Egestorf

Koşul: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic brake system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Drawbar adjustable in height by approx. 300 mm * 40 mm flange towing eye Dksdpfx Aol Tilxeddjl ----General Attachments: * Jost mechanical landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted exterior on bulkhead ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----Cargo Area: * 50 mm softwood floor * 20" container locks, mounted at front and rear * Bolted smooth sheet steel bulkhead * Drop-down trapezoidal profile steel side walls with spring-assisted wall lifters * Bolted, hot-dip galvanized rear stakes ----Load Securing: * Perforated outer frame, bent at approx. 45°, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing brackets every 600 mm (5 lashing rings fitted on each side) * 1 x 6.3 t lashing ring at each front and rear corner * Various boreholes in the bulkhead and rear cross-member for 1.2 t lashing options ----Ramps: * 1 pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear-accessed storage compartment for ramps, integrated under the loading area within the chassis ----Paint / Finish: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Drop side color RAL 9010 pure white * Side wall painting in a RAL color of your choice available at extra cost ----Information: * New vehicle without registration * Subject to errors and prior sale ----Delivery Time: * Available immediately ex Egestorf

Koşul: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline: Dedpfx Adspk D D Ujdokl ----Braking System: * EBS brake system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding support legs at the rear * Toolbox made from galvanized sheet steel on the right side * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * Bolt-on underrun protection with LED rear lights ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel * Hot-dip galvanized chassis * Fully galvanized steel three-way tipper body * Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors * Rear tailgate foldable and swinging via manual central locking * Hot-dip galvanized, bolted rear stanchion ----Load Securing: * 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame * 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks * Lockable rear storage compartment recessed in the chassis beneath the loading area ----Tyres: * 235/75 R 17.5 tires ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf, near the A7

Koşul: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline: ----Braking System: * EBS brake system * Emergency release mechanism for spring brake cylinders Dksdpfspk D Dmsx Addel * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding support legs at the rear * Toolbox made from galvanized sheet steel on the right side * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * Bolt-on underrun protection with LED rear lights ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel * Hot-dip galvanized chassis * Fully galvanized steel three-way tipper body * Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors * Rear tailgate foldable and swinging via manual central locking * Hot-dip galvanized, bolted rear stanchion ----Load Securing: * 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame * 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks * Lockable rear storage compartment recessed in the chassis beneath the loading area ----Tyres: * 235/75 R 17.5 tires ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf, near the A7

Koşul: yeni, azami yük ağırlığı: 8.670 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, * KA-TA-R 11.9 Masterline: ----Brakes: * Wabco EBS * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Towing Eye: Djdjq Hg Dxepfx Addjkl * Height-adjustable (300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting * 15-pin power connector ----General Attachments: * Galvanized sheet steel toolbox, right side-mounted * Bolted underrun protection * Plastic quarter mudguards * Jost mechanical landing leg at the front * Rear: 2 mechanical, hot-dip galvanized folding supports ----Tipper Body: * Mesh hooks on sides and rear in the central locking mounts, plus 3 additional on the front wall * Hot-dip galvanized chassis * Steel pallet three-way tipper body * Continuous, drop-side panels without central stanchion, folding with drop-side assist spring * Rear tailgate can be folded down or swung with manual central locking * Hot-dip galvanized, bolted rear stanchion * 4 mm steel floor plate * Rear ramp mounting rail ----Load Securing: * Each corner with 1 x 5 t recessed and foldable lashing ring * Additionally, 4 x 3 t foldable lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area, integrated into the chassis at the rear ----Tyres: * Tyres: 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar, and landing leg painted in black * Side panels painted in RAL 9010 pure white * Painting of the side panels in an RAL color of your choice available at extra charge * Floor and front wall hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately ex Egestorf

Koşul: yeni, azami yük ağırlığı: 8.600 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, * KA-TA-R 11.9 Masterline: ----Braking System: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Drawbar Eye: * Height-adjustable, hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange drawbar eye ----Electrics / Lighting: * RDÜ tire monitoring system * LED lighting * 15-pin plug connector ----General Attachments: * Toolbox made of galvanized sheet steel, mounted on the right side * Bolt-on underrun protection * Quarter mudguards made of plastic * Jost mechanical landing gear at the front * Rear: 2 mechanical, hot-dip galvanized fold-down supports ----Tipper Body: * Net hooks on the sides and rear in the central locking mounts as well as 3 units on the front wall exterior * Hot-dip galvanized chassis * Steel platform, 3-way tipper body * Continuous side walls, drop-down without central stanchion, with drop-side spring assist * Tailgate, drop-down and swinging with manual central locking * Hot-dip galvanized bolted rear stanchion Dsdpev Dz N Aofx Addskl * 4 mm steel floor plate * Rear guide rail for drive-on ramps ----Load Securing: * 1 x 5 t recessed, folding lashing ring in each corner * 4 x 3 t recessed and folding lashing rings in the outer frame on each side ----Ramps: * 1 pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area, recessed into the chassis from the rear ----Tires: * Tires 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar, and landing gear painted in black tone * Drop-side paintwork in RAL 9010 pure white * Paint finish for side walls in any RAL color available at extra cost * Floor and front wall hot-dip galvanized ----Information: * Reinforced body with load securing certificate in accordance with EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at rear * Plastic quarter mudguards * Plastic toolbox at the front right outside on the front wall ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Area: Djdpfx Adsq Ra D Esdokl * Loading area: 6.27 m * Suitable for container transport * 50 mm softwood flooring * Preparation in front of bulkhead for retrofitting container locks * Bolted smooth steel bulkhead * Drop-side panels made of trapezoidal-profiled sheet steel, foldable with sideboard spring assist * Rear wall slidably mounted between ramp brackets, when not in use stows inside in front of the bulkhead * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option for installation of 3 t foldable lashing rings every 600 mm * In each corner front and rear: 1 x 6.3 t lashing point * Various drillings in front and rear traverse for 1.2 t lashing option ----Ramps: * One-piece mechanical drive-on ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together up to 20 mm) * Rear approach angle approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, rear wall, rear stakes, and drive-on ramps * Sides painted in RAL 9010 pure white * Painting of side panels available in any RAL color at extra cost ----Info: * Subject to errors and prior sale * New vehicle with manufacturer’s warranty ----Delivery Time: Available from CW (calendar week)

Koşul: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Drawbar Eye: * Drawbar adjustable in height by 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox, front right, mounted externally on the front wall ----Electrics / Lighting: * Tire pressure monitoring system (RDÜ) * LED lighting ----Load Area: * Load length 6.27 m * Suitable for container transport * 50 mm softwood floor Dedpfx Ajrvvfwsddekl * Preparation in front of the front wall for retrofitting container locks * Front wall bolted from smooth sheet metal * Drop sides made from trapezoidal-profiled steel, foldable with spring lifter * Rear wall made of steel, can be slid in between the ramp holders, stored in front when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame angled at approx. 45 degrees, lashing force 2 t every 480 mm * Installation of foldable lashing rings with 3 t rating every 600 mm possible * In each corner front and rear: 1 x 6.3 t lashing point * Various bores in the front and rear cross members for 1.2 t lashing options ----Ramps: * One-piece mechanical loading ramps with spring assembly for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Rear approach angle approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Chassis, drawbar, front wall, rear wall, rear stakes, and ramps hot-dip galvanized * Drop side panels painted in RAL 9010 pure white * Side walls can be painted in any RAL color for a surcharge ----Notes: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery Time: Available from CW (calendar week)

Koşul: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles Dedpfxspk D D Hj Addekl * Air suspension, drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing gear at the front * External folding support legs at the rear * Toolbox made of galvanized sheet steel, approx. 650 x 350 x 320 mm, mounted laterally on the right (powder-coated in black) * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * Reinforcement package for drill rig transport on chassis – loading height + 20 mm * 50 mm softwood floor, clamped design * Provisions in front of the bulkhead for subsequent installation of container locks * Bolted smooth sheet steel front wall * Drop-down side walls of trapezoidal profiled steel with tailgate spring assist * Steel rear panel, retractable between ramps – bracket inside ahead of front wall for storage when not in use * Bolted rear stanchions * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * In each front and rear corner: one 10 t lashing point; various holes for 1.2 t lashing options in the front and rear cross members * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be compacted to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, front wall, tailgate, rear folding supports, and access ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black * Wheelbase: 1,310 mm * Tires: 235/75R17.5 * Side board coating in RAL 9010 pure white * Painting of the side walls in a RAL color of your choice available at extra charge * New vehicle with manufacturer's warranty * Subject to changes and prior sale * Immediately available from Egestorf

Koşul: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at the front * Rear external folding supports * Tool box, galvanized steel sheet approx. 650 x 350 x 320 mm, mounted right side (black powder-coated) * Side underrun protection * Plastic quarter mudguards * 15-pin power connector * LED tail lights * Reinforcement package for drilling rig transport on chassis (loading height +20 mm) * 50 mm softwood flooring, clamped version * Fixture in front of bulkhead for retrofitting container locks * Bolted smooth plate steel bulkhead * Fold-down, trapezoidal-profile steel sidewalls with drop side spring assist * Removable steel tailgate insertable between ramps, holder inside front bulkhead when not in use * Bolted rear stakes * Perforated outer frame approx. 45° bent, with 2 t lashing capacity every 480 mm * Optionally, 3 t flush lashing rings can be installed every 600 mm * In each front and rear corner: 1 x 10 t lashing point, various holes in front and end cross-members for 1.2 t tie-down possibility * One-piece mechanical grid ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (collapsible down to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, front wall, rear tailgate, rear folding supports and access ramps hot-dip galvanized Djdjpk D Ncjpfx Addokl * Axles, springs, air tanks and landing gear painted in black * Wheelbase: 1,310 mm * Tires: 235/75R17.5 * Sidewalls painted in RAL 9010 pure white * Custom color for sidewalls in any RAL shade available for an extra charge * New vehicle with manufacturer's warranty * Subject to prior sale and errors excepted * Available immediately ex Egestorf

Koşul: ikinci el, boş ağırlık: 4.550 kg, azami yük ağırlığı: 13.450 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2016, yükleme alanı uzunluğu: 6.540 mm, yükleme alanı genişliği: 2.480 mm, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5, renk: beż, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, 10 pairs of lashing rings, loading height approx. 900 mm, customer vehicle, -- subject to typing errors, mistakes and changes, sample images --, More data at: !, More Details: ! Dsdpfx Adsy Niwwjdokl

Koşul: ikinci el, azami yük ağırlığı: 39.500 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 09/2010, bir sonraki muayene (TÜV): 12/2026, yükleme alanı uzunluğu: 9.345 mm, Üretim yılı: 2010, * Müller Mitteltal T50 Compact Dksdpfsyzlyxsx Addol * Low-bed trailer * Ramps * Tires: see images * 5 axles * Gigant axles * Permissible gross weight: 50,000 kg * Unladen weight: 10,500 kg * Payload: 39,500 kg * Air suspension * Immediately available * Subject to prior sale and errors. Do you have any questions? Contact us for quick assistance, you are also welcome to reach out directly via WhatsApp: Our services include: Net purchase for companies within the EU with a valid VAT ID number, and for customers from non-EU countries. Leasing and financing options. Handling all customs formalities. Issuance of short-term and export license plates. Transport to the port. All prices listed in classified ads are gross prices and already include the statutory VAT of 19%.

Koşul: yeni, azami yük ağırlığı: 27.940 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * Wabco EBS-E (electronic braking system) Djdpewh Hdxjfx Addskl * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t axles * Air suspension with raise/lower function and RtR valve * Start-assist for maneuvering via EBS to the first axle (no truck-side installation) with lifted lift axle +30 mm ride height * Smart-Board information tool mounted on trailer with pressure sensors for total axle load display * Last axle configured as self-steering axle with electro-pneumatic steering lock * Steering lock for the self-steering axle can be activated from the tractor for maneuvering via EBS (without truck-side installation) * 2" king pin * 1 liftable axle * Side underrun protection * Front aluminum drop legs and rear swinging supports on chassis * Alcoa LVL One aluminum rims * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 2 LED work lights on trailer sides (no truck-side installation) * 7-pin socket at rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with in-cab display option via EBS signal (without truck-side installation) * Mechanically adjustable warning sign holder packages front and rear * Straight steel fenders * Fifth-wheel platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 mm x H = 500 mm x L = 665 mm) with top folding lid and side doors in the chamfered corners * On each side of the fifth-wheel platform, 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable * Rear drop-in wall, 150 mm high * Rear slant on the fifth-wheel platform to the lowbed, approx. 700 mm long with checker plate and perforated strip for attaching aluminum loading ramps * Fifth-wheel and lowbed platforms with 50 mm clamped wooden planks * Tread plate above axles * Preparation for 3 receptacle shafts under the fifth-wheel platform for storing optional aluminum ramps * Swivel arm as a carrier for connecting lines from the truck to the trailer * Load securing package consisting of: perforated outer frame on the fifth-wheel platform, 45° bent with hole pattern for lashing equipment (2 t lashing force per point with min. 480 mm spacing), 2 x 6.3 t recessed lashing rings on each side, 1 x 16.5 t lashing ring per side on the slope from lowbed platform to fifth-wheel platform, 2 pairs of 16.5 t lashing rings in the lowbed platform (1 pair on the longitudinal beams after the step, 1 pair over the middle axle next to the longitudinal beam), 3 x 13.4 t lashing rings per side on the outer frame (1 at beginning of fifth-wheel frame step, 1 at start of ramp slope, 1 at end of ramp slope), 3 x 10 t lashing rings each side (2 between front wheel recess and 1st axle, 1 between 2nd and 3rd axle), 3 x 5 t lashing rings per side bolted to the outer frames of the wheel recesses (2 at the front, 1 at the rear) * Extended excavator arm resting area from the end of the last rigid axle over the steering axle to the rear cross member, continuous with internal reinforcement profile approx. W = 770 mm x Depth rear = 270 mm / Depth front 170 mm; 2 x 6.4 t lashing rings per side in the excavator arm rest * 2 wheel recesses per side, 390 mm deep and 640 mm wide, for transporting wheel loaders with a wheelbase of 3,000 – 3,590 mm and a tire diameter of 1,760 mm – with sliding covers * 2nd sliding cover...

Koşul: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – no installation required on the truck side * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Height-adjustable drawbar (~300 mm) with 40 mm flanged towing eye * Jost manual landing gear at the front * Two manual folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted at the front right side of the chassis * 15-pin power connector * LED rear lights 12/24 V * Bolt-on underrun protection Djdjx Hm Rcepfx Addokl * Plastic quarter mudguards * Tie-down hooks at the positions of the central locking as well as 2 pieces at the front wall * Chassis made of fine-grained steel * Steel pallet-style three-way tipper body with reinforced Strong side panels (continuous side walls at the top with internal tube reinforcement – without mid-stakes – foldable with panel spring lifter) * Rear stakes bolted * Combination steel double-wing rear doors, asymmetrically split – can be swung and locked at 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping operation, locking by zinc-coated rotary bolt closure at the rear and central locking, deactivation function for automatic tailgate during reverse tipping with open wing door * Each corner equipped with one 5 t lashing point, each side with four 3 t lashing rings recessed in the outer frame * 4 mm floor plate made of fine-grained steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load bearing capacity 10 t/pair) suitable for rubber-tired & tracked vehicles * Lockable storage compartment recessed under the loading platform at the rear in the chassis for ramps * Drawbar, underrun protection, rear stakes and rear folding supports hot-dip galvanized * Axles, springs, air tanks and landing gear painted in a shade of black * Tyres: 358/55 R 19.5 * Side panels painted to customer’s RAL color specification (except special or metallic paint) – may be changed up to approx. 6 weeks before completion * Errors and prior sale excepted * Available from week 29/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Tire pressure monitoring with display capability in the truck via EBS signal - no truck-side installation required - * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem balancing unit * Drawbar height-adjustable by approx. 300 mm with 40 mm flanged towing eye * Jost mechanical landing gear at the front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on chassis * 15-pin power connector * LED tail lights 12/24 V * Bolt-on underrun protection * Plastic quarter fenders * Net hooks at each lock location and 2 at the front wall * Chassis made of fine-grain steel * Steel pallet - three-way tipper body with reinforced strong side boards (continuous upper side walls with internal pipe reinforcement - without intermediate stanchions - foldable with board spring lifter * Screw-on rear stanchions * Combination steel swing door rear wall, 2-leaf, asymmetrically split, can be swung and locked up to 270° - not foldable - with additional pendulum frame for automatic tailgate opening when tipping, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic tailgate function when tipping backwards with doors open * In each corner, 1 x 5 t lashing point and each side, 4 x 3 t lashing rings recessed in the outer frame * 4 mm fine-grain steel floor plate * Rear mounting rail for loading ramps * Reinforced body with load securing certificate Djdpfx Adex Hm Rijdskl * 1 pair aluminum ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Rear lockable storage compartment recessed into the chassis below the loading area for ramp storage * Drawbar, underrun protection, rear stanchion, rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a black shade * Tires: 358/55 R 19.5 * Side walls painted in customer-chosen RAL color (no special or metallic paints) – color can be changed up to approx. 6 weeks prior to completion * Subject to errors and prior sale * Available immediately from KW 29/2026 * Sample images

Koşul: ikinci el, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2016, Donanım: ABS, Johanning’s Nutzfahrzeuge'ye hoş geldiniz, genç ve seçkin ikinci el araçlarınız için uzmanınız. HEMEN teslim! Teslimat mümkün. Fiyat istek üzerine! Finansman ve kiralama istek üzerine mümkündür. Konum: 39606 Osterburg Marka: Mueller Mitteltal Model: TA-2 / ETUE-TA-R 11,9 Yıl: 2016 Boş ağırlık: 3.250 kg TÜV: Mart / 2026 SP: Eylül 2026 Daha fazla fotoğraf veya video talep edebilirsiniz. Dsdpfx Ajycpd Aeddekl Johanning’s Nutzfahrzeuge, seçkin ve genç ikinci el araçlarınız için partneriniz. Hizmetlerimiz – Sizin avantajlarınız (satış sonrası) – Aracınız her durumda takas alınabilir – Aracınız anında ücretsiz olarak terkin edilir – Ruhsat işlemi 150 € (ücretler ve plaka dahil) – Kısa süreli kayıt – Telefonla randevu ile her zaman inceleme ve test sürüşü mümkündür – Teslimat, anlaşmaya göre adrese kadar mümkündür. Hatalar ve ara satış hakkı saklıdır.