Kullanılmış Müller-Mitteltal Tandem Tieflader- Tiefbett, 5,5 M - Durchfahrbar satın al (44.064)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranhänger
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E brake system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* Duomatic brake connection
----Axle:
* 2 x SAF axles, rated at required tonnage
* First axle configured as a lift axle (fully automatic)
* Lift axle with ride height +30 mm via control cylinder
* Start-assist function for maneuvering and forced lowering to the first axle — switchable via speed-dependent EBS electronic system (no installation required on the truck side, with additional cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering via radio remote control
----Drawbar / Flange Towing Eye:
* 50 mm bolted flange towing eye — height-adjustable by +77 mm and -33 mm — for 2 t support load
----Electric / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary connector
* LED lighting system 12 / 24V
* 2 LED reversing lights, actuated via reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems
* Extended connection cables for agricultural and forestry vehicles
* Wireless power supply 12V + 24V via tail light circuit
----General Attachments:
* BPW support winch at the front
* Mechanically extendable underride guard for container lengths over 6,000 mm
* Speedline diamond-finish aluminum rims
* Detachable pin-type towing coupling (use only with retracted underride guard)
* Enclosed plastic half-shell single mudguards
* Two-step access ladder in front of the bulkhead, left side (direction of travel)
* Shovel and broom holder in front of the bulkhead
* 2 matte stainless steel toolboxes approx. 650 x 350 x 320 mm, mounted laterally on the right
* Enclosed side impact protection, usable as advertising space
----Hydraulics:
* Dual-circuit hydraulic connections (engine side from truck/tractor), rated for 180 bar (tractor operation)
* Double-acting control circuit for hydraulic tailgate (mounted right, direction of travel) with remote control operation
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift device (serial no. 100746129, year 2023)
* Main frame constructed from high-strength fine-grain steel
* 20,000 kg lifting capacity
* Hook height 1,570 mm
* Hooklift operation controlled by radio remote
* Remote with fast function for unloading, but not for loading
* Emergency stop switches on both left and right sides
* Container supports: 4 lateral supports per side and 1 rear roller each side
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to assist main arm lifting
* 2 mechanical drop supports at the rear
* Approval for 20 tonnes gross vehicle weight (2 x 9 t axles) and 2 t support load
* Note: If the remote control is removed from its charging station, the service brake must be applied to enable radio operation. Brake connections must remain connected at all times to allow electro-hydraulic/pneumatic valves to open
* Monitoring system for underride guard to ensure it is retracted when tipping
----Loading Height:
* Unladen approx. 1,300 mm with lift axle lowered
----Paintwork:
* Chassis, drawbar, step, underride protection, and support legs hot-dip galvanized
* Axles, air tank, and front support winch painted in black
* Palfinger hooklift painted in black / yellow
Ledpfx Asx Dp Agolaohg
----Information:
* Subject to errors and prior sale
* Vehicle is in very good / as-new condition
----Delivery Time:
* Vehicle is available immediately
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranh. mit Container
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
* Duomatic brake coupling
----Axle:
* 2 x SAF axles, rated for high load
* First axle configured as lift axle (fully automatic)
* Lift axle travel height +30 mm via height-adjustment cylinder
* Start-assist function for maneuvering and forced lowering to first axle – activated through speed-dependent EBS electronic module (no installation required on towing vehicle, includes additional cable for in-cab operation from tractor)
----Air Suspension:
* Air suspension with lowering function via radio remote control
----Drawbar / Flanged Eye:
* 50 mm flanged towing eye - height-adjustable by +77 mm and -33 mm - for 2 t vertical load
----Electrics / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary socket
* LED lighting system 12 / 24V
* 2 LED reversing lights, activated via reverse gear
* EBS multi-voltage system, compatible with towing vehicles fitted with 12V & 24V electrics
* Extended connection cables for agricultural and forestry vehicles
* Power supply for remote control: 12+24 V via tail light circuit
----General Equipment:
* BPW manual landing gear at the front
* Mechanically extendable underrun protection for container lengths over 6,000 mm
* Speedline diamond-cut aluminium wheels
* Pin-type towing coupling (use only when underrun protection is retracted)
* Enclosed plastic half-shell single wheel guards
* Double access step, front left of the bulkhead
* Shovel and broom holder in front of the bulkhead
* 2 stainless steel toolboxes (matte finish), approx. 650 x 350 x 320 mm, mounted right-hand side
* Enclosed side underrun protection, suitable for use as advertising space
----Hydraulics:
* Dual-circuit hydraulic couplings (vehicle/tractor side) rated for 180 bar (tractor operation)
* Double-acting hydraulic control circuit for rear tailgate (mounted front right), operated via radio remote control
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023)
* Base frame constructed from high-tensile fine-grained steel
* 20,000 kg traction force
* Hook height: 1,570 mm
* Hooklift controls via radio remote
* Quick function available for discharging, not for loading
* Emergency stop button on both left and right sides
* Container mounts: each side with 4 supports plus 1 rear roller each
* Hydraulically operated rear internal locking
* 2 additional hydraulic cylinders to assist main arm lifting
* 2 x mechanical drop-down supports at rear
* Homologated for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load
* Note: If the remote control is outside the charging cradle, the service brake must be applied to enable radio operation. Brake couplings must remain connected to allow operation of the hydraulic/pneumatic control valves
* Monitoring system ensuring underrun protection is retracted before tipping
----Loading Height:
* Unladen approx. 1,300 mm with lowered lift axle
Lhedpsx Dp Amofx Alajg
----Paintwork:
* Chassis, drawbar, access steps, underrun protection, and drop supports hot-dip galvanized
* Axles, air reservoirs, and front landing gear painted in black
* Palfinger hooklift painted black/yellow
----Information:
* Errors and prior sale excepted
* Vehicle is in very good / as-new condition
----Container Dimensions:
* Internal length: 5,500 mm
* Internal width: 2,300 mm
* Internal height: 1,000 mm
Information:
* Mounting brackets for hook s
Küçük ilan
Bovenden
2.411 km
Roll-off dorse
Müller-MitteltalTRA-Kombi 18,0 Abroll/Absetz/Tieflader
Çağrı
Koşul: ikinci el, boş ağırlık: 5.100 kg, azami yük ağırlığı: 12.900 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 12/1998, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 1 mm, toplam uzunluk: 2.550 mm, toplam genişlik: 1.600 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, dingil mesafesi: 5.400 mm, renk: turuncu, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), lashing rings, container locks, underrun protection, pneumatically adjustable drawbar, side aluminium side impact protection, twin tyres, storage box, removable side walls.
Lhjdpfxei Rpxwe Alasg
Wheelbase: 5,400 mm. Body: Trailer for roll-off containers in lengths 6 m to 6.75 m, SAF axles type SKRZ 11030, pneumatic hook low-tension device, 2 x mounting pockets for plug-in locking hooks, 4 x pockets for plug-in container centring and container stops. The trailer can also be used as a flatbed! Aluminium side walls with a height of 600 mm are included with the trailer!
Loading ramps available at an additional net price of €900. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to modifications, prior sale and errors!

Şimdi bilgi alın
+49 201 858 95 507
+49 201 858 95 507
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTALPT40 Sonderpreis, Tieflader mit hydr. Rampen
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 4 x 11 t Gigant axles
* Air suspension with lift and lower system and RtR valve
* Pressure gauge scale for load weight determination (axles separated into 2 air suspension circuits)
* Side underrun protection
* Swing-out supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages front and rear
* Front axle: plastic quarter mudguards with splash protection
* Rear axle: straight, galvanized steel sheet skirts with splash protection
* Reflective contour tape on the sides and rear
* EBS multi-voltage system with 12 & 24 V electrics
* 15-pin power connector
* LED lighting system 12/24 V
* Removable LED rotating beacon at the rear
* 2 LED reversing lights (activated by reverse gear)
* Drawbar with 50 mm towing eye and height adjustment
* Tool box made of galvanized, black powder-coated steel sheet, approx. 1,000 mm wide, 600 mm deep, 300 mm high
* Front extension in front of the turntable platform, approx. 490 mm long with 45° corners
* ROBOT-welded anti-slip covering on the steel plate of the turntable platform
* Load securing package consisting of: 1 x 13.4 t UVV lashing eye on left and right in front of the front wall support, 4 holes on each side of the turntable platform with 2 t lashing capacity each, 1 pair of lashing eyes (13.4 t) hanging at the rear left & right in front of the rear support, 4 pairs of UVV lashing rings (10 t) per side, pivoting and lowerable, loadable in all directions and integrated into the outer frame, 3 stake pockets per side with simultaneous 2 t lashing option
* Hot-dip galvanized mechanical folding outriggers for 3 m total width (not at the rear bevel)
* Beam holder for extensions under the chassis on the left, longitudinally
* Excavator arm holder above the rear axle up to the end beam, approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 t lashing eyes per side in the excavator arm holder
* Hardwood floor on the running surfaces of the low-loader platform
Lsdjl Tlhrepfx Alaohg
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) mechanically adjustable laterally
* Outer beams of the loading ramps made of hardwood
* Steel construction prepared for 6-control valve block
* Loading edge unloaded approx. 950 mm +/- 20 mm chassis
* Turntable, folding outriggers, mechanical drop supports, loading ramps hot-dip galvanized
* --Axles, air tank, drawbar painted in a black tone--
* Tyres 235/75 R 17.5
* Vehicle has a one-day registration in 07/2024 due to missing tire pressure monitoring system and was never loaded/used
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Absetzcont.-Anh., Sonderpreis
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4:
----Braking System:
* Wabco ABS braking system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalization unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar (+/- 150 mm)
* 40 mm bolted towing eye
----General Attachments:
* Jost landing gear at the front
* Side underrun protection
* Foldable rear A-shield
----Electrics / Lighting:
* 15-pin power connector
* Multi-chamber tail lights
----Body:
* Fixed steel front and side walls
* Removable steel rear wall
* Floor made from 50 mm softwood
Ljdpfx Aol Th Eyjlaohg
* 1 sliding plate 750 x 1,000 mm positioned at the front, incl. 2 moveable trough stops at the front (plug-in, 2 positions each)
* Rear crossmember suitable for use with aluminum approach ramps, incl. 2 additional drop-down supports at the rear
----Loading Edge:
* Unladen loading edge approx. 710 mm
----Load Securing:
* 4 repositionable trough stops, can be plugged into 2 positions for lateral centering of the troughs
* On each side: 1 x (13.5 t) UVV tie-down point for attaching tensioning devices
* 2 ratchet tensioners (spindle adjustment) with equalizing chain and quick-shortener (tensioning force 6,300 kg)
----Tyres:
* Tyres: 285/70R19.5
----Wheelbase:
* Wheelbase: 1,140 mm
----Paintwork:
* Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized
* Axles, springs, landing gear, and air reservoir painted in black
----General Information:
* The vehicle has a day registration from 06/2024, has not been in use or loaded due to the absence of a tire pressure monitoring system
* Subject to prior sale and errors excepted
----Delivery Time:
* Available immediately ex Egestorf on the A7
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTAL14,4 to. Tandem Absetzcont.-Anh., Sonderpreis
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4:
----Brakes:
* Wabco ABS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizing unit
----Tow Bar / Flange Drawbar Eye:
* Height-adjustable tow bar (+/- 150 mm)
* 40 mm bolted drawbar eye
----General Attachments:
* Jost landing gear at the front
* Side underrun protection
* Foldable rear A-plate
----Electrics / Lighting:
* 15-pin electrical connector
* Multi-chamber tail lights
----Body:
* Fixed steel front and side walls
* Removable steel rear wall
* Floor made of 50 mm softwood
* 1 sliding sheet metal plate 750 x 1,000 mm at the front, including 2 removable trough stops at the front, insertable in 2 positions
* Rear traverse for mounting aluminum loading ramps, including 2 additional rear drop stands
----Loading Edge:
* Unladen loading height approx. 710 mm
----Load Securing:
* 4 repositionable trough stops, insertable in 2 positions for lateral centering of the troughs
* On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices
* 2 ratchet tensioners (spindle adjustment) with compensating chain and quick shortener (tensioning force 6,300 kg)
----Tyres:
* Tyres: 285/70R19.5
----Wheelbase:
* Wheelbase: 1,140 mm
----Paintwork:
* Chassis, front wall, side walls, mudguards, tow bar, and rear drop stands hot-dip galvanized
* Axles, springs, landing gear, and air tanks painted in black
----General Information:
* Vehicle has a one-day registration in 06/2024 due to missing tire pressure monitoring system, and has not been loaded or used
* Subject to errors and prior sale
Lhjdpel Th Dmsfx Alaeg
----Delivery Time:
* Available immediately from Egestorf on the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALPT 40 Sonderpreis, Tieflader mit hydr. Rampen
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 4 x 11 t Gigant axles
* Air suspension with lifting and lowering system, including RtR valve
* Manometer pressure gauge for load weight determination (axles separated into two air suspension circuits)
* Side underrun protection
* Swing-out support legs at the rear of the chassis frame
* Mechanically adjustable warning sign kits at front and rear
* Front axle: plastic quarter mudguards with splash protection
* Rear axle: straight galvanized steel mud flaps with splash protection
* Reflective contour tape on sides and rear
* EBS multi-voltage system with 12 & 24 V electrics
* 15-pin power connector
* LED lighting system 12 / 24 V
* Removable LED beacon at the rear
* 2 LED reversing lights (activated via reverse gear)
* Drawbar with 50 mm towing eye and height adjustment
* Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high
* Extension in front of the turntable platform, approx. 490 mm long with 45° corners
* Robot-welded anti-slip covering on the steel plate of the turntable platform
* Load securing package consisting of: in front of the bulkhead carrier left & right each 1 x 13.4 t UVV lashing ring, on each side 4 holes in the turntable platform with 2 t lashing force each, 1 pair of lashing rings (13.4 t) suspended at the rear left & right in front of the rear cross member, on each side 4 pairs of swiveling and lowerable UVV lashing rings (10 t), loadable in all directions and recessed in the outer frame, on each side 3 stake pockets with simultaneous 2 t lashing possibility
* Hot-dip galvanized mechanical fold-out extensions for 3 m overall width (not in the rear slope area)
* Plank holder for extensions under the chassis left, longitudinal orientation
Lsdel Tnu Ajpfx Alajhg
* Excavator stick rest, from rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep, on each side 2 pairs of 6.4 t lashing rings in the excavator stick rest
* Hardwood flooring on the running surfaces of the low loader platform
* Hydraulically operated single-piece loading ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable
* Outer planks of the loading ramps made of hardwood
* Steel structure pre-manufactured for 6-way control valve
* Loading edge height unladen approx. 950 mm +/- 20 mm chassis
* Turntable, fold-out extensions, mechanical supports, loading ramps all hot-dip galvanized
* --Axles, air tanks, drawbar painted in black--
* Tyres: 235/75 R 17.5
* The vehicle has a day registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Available immediately ex Egestorf
Küçük ilan
Egestorf
2.484 km
Skip loader römork
Müller-Mitteltal14,4 to. Tandem Absetzcont.-Anh., Sonder
Çağrı
Koşul: yeni gibi (kullanılmış), azami yük ağırlığı: 14.400 kg, toplam ağırlık: 12.080 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, süspansiyon: parabolik yaprak (yay), lastik boyutu: 285/70R19.5, dingil mesafesi: 1.140 mm, römork freni: frenli römork, Üretim yılı: 2022, - ETM-TA 14.4:
- Wabco ABS braking system
- Emergency release mechanism for spring-loaded cylinders
- Drum brakes, 2 x 7 t Gigant axles
- Parabolic springs with tandem compensation unit
- Height-adjustable drawbar (+/- 150 mm) with 40 mm screwed towing eye
Ljdpfx Alexvbcpoaehg
- Jost landing gear at the front, lateral underrun protection
- Foldable A-panel at the rear
- 15-pin electrical connector, multi-chamber tail lights
- Fixed steel front and side walls
- Removable steel rear wall
- Floor made of 50 mm softwood
- 1 sliding plate pad 750 x 1,000 mm in the front area incl. 2 removable skip stops at the front, each adjustable to 2 positions
- 4 interchangeable skip stops, adjustable to 2 positions each for lateral centering of the skips
- 1 UVV-compliant lashing point per side (13.5 t) for attaching tensioning elements
- 2 ratchet tensioners (spindle adjustment) with equalizer chain and quick shortener (tension force 6,300 kg)
- Rear crossmember for mounting aluminum loading ramps incl. 2 additional drop-down supports at the rear
- Unladen loading edge approx. 710 mm
- Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized
- Axles, springs, landing gear, air tanks painted black
- Tyres: 285/70R19.5
- Wheelbase: 1,140 mm
- Unladen loading edge: approx. 710 mm
- Hot-dip galvanized finish
- Vehicle has day registration from 06/2024, not loaded/used due to missing tire pressure monitoring system
- New vehicle with manufacturer's warranty
- Subject to errors and prior sale
- Immediately available from Egestorf off A7
Küçük ilan
Wardenburg
2.588 km
Üç yöne devirmeli römork
MÜLLER-MITTELTALTandem-3-Seiten-Kipper KA-TA-R 11,9
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 8.750 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, toplam genişlik: 2.550 mm, Üretim yılı: 2023, Müller Mitteltal KA-TA-R 11.9 Tandem Three-Way Tipper with Many Extras. Gross weight: 11,900 kg. Standard payload approx.: 8,750 kg. Internal dimensions: 5,000 x 2,420 x 500 mm. Tyres: 385/55R19.5. 4-coat single-colour paint. Wheels: silver. Chassis/underrun protection: hot-dip galvanized. Platform with front wall: hot-dip galvanized. Axles/springs/air tank etc.: black. Side and rear walls: RAL 2011 deep orange. Reinforced and certified body according to EN 12642 XL incl. load securing certificate (only in combination with 500 mm high steel drop sides). Rear stakes bolted, hot-dip galvanized, no top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated laterally and at the rear in the central locking mounts of the base side wall, plus 2 units on the front wall. BPW axles instead of GIANT. Tipping platform with fixed front wall, hot-dip galvanized version, with bolted, galvanized rear stakes, no additional coating (not applicable with HARDOX floor). Due to the system, waviness may occur during hot-dip galvanizing, especially with large floor sheets; complaints regarding this are excluded from warranty coverage. Tyres 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, code 08.940, ramp length 3,570 mm required). 1 plastic toolbox, black, lockable, W=750 x H=350 x D=300 mm (45 kg capacity with even load), location: on right side of chassis frame in driving direction. 1 pair ALU loading ramps without wheel track (8 t/pair), 3,570 x 400 x 105 mm, suitable for rubber-tyred and tracked vehicles, 55 kg/unit. Two-step access in front of the front wall, on left in driving direction (hot-dip galvanized). Connection lines extended for agricultural and forestry tractors.
Further information:
Lhjdpfx Asvy Tvtelajg
New: No
Küçük ilan
Wiesmoor
2.630 km
Alçak şasi römork
BLOMENRÖHRTandem Tiefbett Tieflader 545/5000
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 3.570 kg, toplam ağırlık: 5.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 01/2015, bir sonraki muayene (TÜV): 07/2025, yükleme alanı uzunluğu: 3.500 mm, yükleme alanı genişliği: 1.800 mm, yükleme alanı yüksekliği: 600 mm, toplam genişlik: 2.280 mm, Toplam ağırlık: 5.000 kg
Boş ağırlık: 1.430 kg
Taşıma kapasitesi: 3.570 kg
Toplam uzunluk: 5.580 mm
Lodpfxow N A E Hs Alaehg
Yükleme uzunluğu: 3.500 mm
Genişlik: toplam genişlik 2.280 mm / yükleme genişliği 1.800 mm
Yükseklik: yaklaşık 600 mm
Diğer bilgiler
- Izgaralı rampalar 2.000x450 mm
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-ER 19.0:
----Braking system:
* Wabco EBS-E (electronic braking system)
* Emergency release for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 11 t Gigant axles
----Suspension:
* Air suspension with lifting and lowering facility
----Drawbar / Flange Drawbar Eye:
* Drawbar with 50 mm flange drawbar eye and 110 mm height adjustment via offset plate
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin power connector
* LED tail lights 12 / 24 Volt
----General Attachments:
* Jost landing leg at front
* External folding supports at rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* Reinforcement package for drilling rig transport on the chassis
* 50 mm softwood floor, clamped design
* Fittings in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth sheet
* Split steel side walls, trapezoidal-profiled, foldable with folding stake in the center
* Steel rear wall, slide-in between ramps (storage bracket for non-use inside in front of bulkhead)
* Rear stakes bolted
----Load securing:
* Perforated outer frame approx. 45 degrees angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashings every 600 mm
* Load securing package: in front and rear corners, each 1 x 10 t UVV-rated lashing point, each side 2 x 8 t UVV-rated lashing rings, retractable in outer frame; various holes for 1.2 t lashing option in front and rear cross members
Lhjdpjmi Tmaefx Alaog
----Ramps:
* One-piece slide-in ramps, 12 t / pair, approx. 2,750 x 620 mm
* Rear driving slope approx. 860 mm
----Loading height:
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
----Tyres / Wheelbase:
* Wheelbase: 1,810 mm
* Tyres: 235/75R17.5
----Paintwork:
* Chassis, drawbar, bulkhead, rear gate, folding supports, and loading ramps hot-dip galvanized
* ---Axles, air tanks, flange drawbar eye, and landing leg painted in black shade---
* Vehicle is hot-dip galvanized
----Info:
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted / subject to change
----Delivery time:
* Immediately available from Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-ER 19.0:
----Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 11 t Gigant axles
----Suspension:
* Air suspension with lifting and lowering device
----Drawbar / Flange Eye:
* Drawbar with 50 mm flange towing eye and height adjustment by 110 mm via offset plate
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin power connector
* LED tail lights 12 / 24 volt
----General Attachments:
* Jost landing gear at the front
* External folding supports at the rear
* Plastic Toolbox approx. 750 x 350 x 300 mm, right side
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Bed:
Lodpjmi Tcqofx Alaohg
* Reinforcement package for drill rig transport on the chassis
* 50 mm softwood floor, clamped version
* Provision in front of bulkhead for subsequent installation of container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of trapezoidal-profiled steel sheet, fold-down with folding stanchion in the center
* Steel rear wall insertable between ramps—bracket for stowing inside in front of bulkhead when not in use
* Screw-mounted rear posts
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing brackets every 600 mm
* Load securing package: Each front and rear corner with 1 x 10 t UVV lashing ring; each side with 2 x 8 t UVV retractable lashing rings integrated into outer frame; various boreholes in front and end crossmembers for 1.2 t lashing points
----Ramps:
* Single-piece sliding ramps, 12 t/pair, approx. 2,750 x 620 mm
* Rear approach angle approx. 860 mm
----Loading Height:
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
----Tyres / Wheelbase:
* Wheelbase: 1,810 mm
* Tyres: 235/75R17.5
----Paintwork:
* Chassis, drawbar, bulkhead, rear flap, folding supports, and access ramps hot-dip galvanized
* ---Axles, air tank, flange towing eye, and landing gear painted in black---
* Vehicle is hot-dip galvanized
----Information:
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Agra vorbereitung
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline
----Braking System:
* Wabco EBS
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Flange Eye:
* Height-adjustable drawbar (up to 300 mm), with 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ Tire Pressure Monitoring System
* Multivoltage
* 15-pin power connector
* 12V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED rear lights
----General Attachments:
* Manual landing gear at the front
* Two mechanical folding supports at the rear
* Plastic toolbox, right-hand side
* Two-step entry at the front left (in direction of travel)
* Bolted underrun protection
* Plastic quarter mudguards
----Tipper Platform:
* Mesh hooks on sides and rear at the central locking mounts, plus two on the front bulkhead
* Steel platform superstructure, 3-way tipper (continuous side walls, without center stanchions, drop-down with tailgate spring assist, tailboard foldable and swinging via manual central locking)
* 4 mm steel bed
* Rear ramp mounting rail
----Load Securing:
* One lashing point (5 t) in each corner
* Four lashing rings (3 t each) recessed on each side into the outer frame
----Ramps:
* One pair of aluminum approach ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment for ramps recessed under the loading area in the chassis
----Tyres:
* Tyres 385/55 R 19.5
Ljdpfx Aloq Euagoashg
----Paintwork:
* Chassis, drawbar, tipper body, bulkhead, folding supports, and rear stanchions hot-dip galvanized
* Axles, springs, air tank, flange eye and landing gear painted in black
* Side panels painted in a RAL color of your choice (no special or metallic finishes); color can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced body with EN 12642 XL load securing certificate
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Sample images
----Delivery Time:
* Available from approx. calendar week 28 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Agra vorbereitung
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline
----Braking System:
* Wabco EBS
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalisation unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar (adjustable by 300 mm) with 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* Multivoltage
* 15-pin power connector
* 12 V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED rear lights
----General Attachments:
* Mechanical landing gear at the front
* Two mechanical folding supports at the rear
* Plastic toolbox on the right side
* Two-step entry step at the front left (in driving direction)
* Bolted underrun protection
* Plastic quarter mudguards
----Tipper Body:
* Net hooks on the sides and rear in the central locking bearing, plus 2 on the front wall
Lhsdpfxel Thw Is Alasg
* Steel pallet-3-way tipping body (continuous side walls, without centre stanchions, foldable with board wall spring assist, tailgate foldable and swinging via manual central locking)
* 4 mm steel floor
* Mounting rail at the rear for loading ramps
----Load Securing:
* 1 x 5 t lashing ring in each corner
* 4 x 3 t lashing rings recessed into the outer frame on each side
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment under the loading platform, recessed into the chassis at the rear
----Tyres:
* Tyres 385/55 R 19.5
----Paintwork:
* Chassis, drawbar, tipping body, front wall, folding supports and rear stanchions hot-dip galvanised
* Axles, springs, air tanks, flange towing eye and landing gear painted black
* Side walls painted in a custom RAL colour (no special or metallic finishes), can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced body with EN 12642 XL load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Sample images
----Delivery Time:
* Available from approx. week 28 / 2026
Küçük ilan
Bovenden
2.411 km
Brandalı açık römork
Müller-MitteltalMüller EAL-TA-P 10,5 Tandempritsche
Çağrı
Koşul: ikinci el, boş ağırlık: 3.260 kg, azami yük ağırlığı: 7.240 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2008, yükleme alanı uzunluğu: 7.100 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.600 mm, toplam uzunluk: 2.550 mm, toplam genişlik: 3.750 mm, süspansiyon: hava, lastik boyutu: 245/70 R 19,5, renk: gri, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden. ABS (anti-lock braking system), air suspension, 2 axles, BPW axles, tandem, curtainsider, lashing rings, lift and lower function, through-loading system, height-adjustable towing bar.
Body: Through-loading via portal doors at the front, sliding mechanisms, tailgate with roller tarpaulin, drum brakes. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted!
Lhjdpsi Rpxaofx Alajg
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL11,9 to Tandemtiefl. 5,37 mtr mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9:
Lhedpfxel Th Nro Alasg
----Braking System:
* EBS brake system
* Emergency release device for spring-actuated cylinders
* Drum brakes, 2 x 5.5 t
----Axles:
* Gigant axles
----Suspension:
* Parabolic springs with equalizing unit
----Towing Eye / Flange Tow Eye:
* Towing bar adjustable in height by 300 mm
* 40 mm flange tow eye
----General Attachments:
* Jost landing gear front
* Exterior folding support legs at the rear
* Plastic toolbox, front right, mounted externally on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----Loading Platform:
* Loading platform 5.37 m
* 50 mm softwood floor
* Bolted front wall made of smooth sheet metal
* Drop sides made of trapezoidal-profiled steel, foldable with drop side spring assist
* Steel rear wall, slide-in panel between ramp holders - stowed in front of the front wall when not in use
* Rear stakes bolted
----Load Securing:
* Perforated outer frame, angled approx. 45 degrees with 2 t lashing capacity at 480 mm intervals
* Option to equip with 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each of the front and rear corners
* Various holes for 1.2 t lashing options in the front and rear crossmembers
----Ramps:
* One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm)
* Approach slope at the rear approx. 860 mm chassis height
----Tyres:
* Tyres 235/75 R 17.5
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
* Drawbar, front wall, tailgate, folding supports, and access ramps hot-dip galvanized
* Axles, springs, air tanks, 40 mm flange tow eye painted in black
* Sideboard painted RAL2011 deep orange
* Painting of side panels in any RAL color available at extra cost
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemtiefl. 5,37 mtr mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9:
----Braking System:
* EBS brake system
* Emergency release system for spring brake cylinders
* Drum brakes, 2 x 5.5 t
----Axles:
* Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Eye:
* Height-adjustable drawbar, 300 mm range
* 40 mm flange towing eye
----General Attachments:
* Jost landing gear at the front
* External foldable support legs at the rear
* Plastic toolbox, front right, mounted externally on the front bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
Lhjdol Th Ncjpfx Alaog
* RDÜ (tyre pressure monitoring)
* LED lighting
----Loading Platform:
* Loading length 5.37 m
* 50 mm softwood floor
* Bolted front bulkhead made of smooth sheet steel
* Drop sides made of trapezoidal profiled steel, foldable, with drop side spring assist
* Rear wall made of steel, can be slid between the ramp holders forward of the bulkhead when not in use
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* One 6.3 t lashing ring in each front and rear corner
* Various holes in front and end crossmembers for 1.2 t lashing options
----Ramps:
* One-piece mechanical steel grating ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm)
* Approach slope at rear approx. 860 mm chassis height
----Tyres:
* 235/75 R 17.5 tyres
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
* Drawbar, bulkhead, tail gate, support legs, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, and 40 mm flange towing eye painted black
* Drop sides painted in RAL2011 deep orange
* Sides can be painted in any RAL color at extra cost
----Information:
* New vehicle with manufacturer's warranty
* Subject to prior sale and errors
----Delivery Time:
* Available immediately ex works Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to. Tandemtiefl. / Einschubrampen verzinkt
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9:
----Braking System:
* Electronic brake system (EBS)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axle assembly
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Eye:
* Drawbar adjustable in height by approx. 300 mm
* 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing gear at the front
* Externally mounted, hot-dip galvanized folding support legs at the rear
* Side underrun protection
* Plastic quarter mudguards
* Plastic toolbox, front right, mounted exterior on bulkhead
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* LED tail lights
----Cargo Area:
* 50 mm softwood floor
* 20" container locks, mounted at front and rear
* Bolted smooth sheet steel bulkhead
* Drop-down trapezoidal profile steel side walls with spring-assisted wall lifters
* Bolted, hot-dip galvanized rear stakes
----Load Securing:
* Perforated outer frame, bent at approx. 45°, with 2 t lashing capacity every 480 mm
* Option to fit 3 t folding lashing brackets every 600 mm (5 lashing rings fitted on each side)
* 1 x 6.3 t lashing ring at each front and rear corner
* Various boreholes in the bulkhead and rear cross-member for 1.2 t lashing options
----Ramps:
* 1 pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Rear-accessed storage compartment for ramps, integrated under the loading area within the chassis
----Paint / Finish:
* Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall
* Drop side color RAL 9010 pure white
* Side wall painting in a RAL color of your choice available at extra cost
Ljdpfsl Tilxsx Alajhg
----Information:
* New vehicle without registration
* Subject to errors and prior sale
----Delivery Time:
* Available immediately ex Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline:
----Braking System:
* EBS brake system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange Towing Eye:
* Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye
----General Attachments:
Lhjdpspk D D Ujfx Alaeg
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding support legs at the rear
* Toolbox made from galvanized sheet steel on the right side
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* Bolt-on underrun protection with LED rear lights
----Tipping Platform:
* Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel
* Hot-dip galvanized chassis
* Fully galvanized steel three-way tipper body
* Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors
* Rear tailgate foldable and swinging via manual central locking
* Hot-dip galvanized, bolted rear stanchion
----Load Securing:
* 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame
* 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps
----Ramps:
* 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks
* Lockable rear storage compartment recessed in the chassis beneath the loading area
----Tyres:
* 235/75 R 17.5 tires
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Vehicle hot-dip galvanized
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available from Egestorf, near the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline:
----Braking System:
* EBS brake system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
Lhsdpfx Aepk D Dmslaog
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange Towing Eye:
* Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding support legs at the rear
* Toolbox made from galvanized sheet steel on the right side
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* Bolt-on underrun protection with LED rear lights
----Tipping Platform:
* Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel
* Hot-dip galvanized chassis
* Fully galvanized steel three-way tipper body
* Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors
* Rear tailgate foldable and swinging via manual central locking
* Hot-dip galvanized, bolted rear stanchion
----Load Securing:
* 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame
* 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps
----Ramps:
* 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks
* Lockable rear storage compartment recessed in the chassis beneath the loading area
----Tyres:
* 235/75 R 17.5 tires
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Vehicle hot-dip galvanized
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available from Egestorf, near the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Anlegerampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.670 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, * KA-TA-R 11.9 Masterline:
----Brakes:
* Wabco EBS
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalization unit
----Drawbar / Flange Towing Eye:
* Height-adjustable (300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* LED lighting
* 15-pin power connector
----General Attachments:
* Galvanized sheet steel toolbox, right side-mounted
* Bolted underrun protection
* Plastic quarter mudguards
* Jost mechanical landing leg at the front
* Rear: 2 mechanical, hot-dip galvanized folding supports
Ledjq Hg Dxepfx Alashg
----Tipper Body:
* Mesh hooks on sides and rear in the central locking mounts, plus 3 additional on the front wall
* Hot-dip galvanized chassis
* Steel pallet three-way tipper body
* Continuous, drop-side panels without central stanchion, folding with drop-side assist spring
* Rear tailgate can be folded down or swung with manual central locking
* Hot-dip galvanized, bolted rear stanchion
* 4 mm steel floor plate
* Rear ramp mounting rail
----Load Securing:
* Each corner with 1 x 5 t recessed and foldable lashing ring
* Additionally, 4 x 3 t foldable lashing rings recessed into the outer frame on each side
----Ramps:
* 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the loading area, integrated into the chassis at the rear
----Tyres:
* Tyres: 235/75 R 17.5
----Paintwork:
* Axles, springs, air tanks, drawbar, and landing leg painted in black
* Side panels painted in RAL 9010 pure white
* Painting of the side panels in an RAL color of your choice available at extra charge
* Floor and front wall hot-dip galvanized
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to prior sale and errors excepted
----Delivery Time:
* Available immediately ex Egestorf
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Anlegerampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.600 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, * KA-TA-R 11.9 Masterline:
Lhsdjv Dz N Aepfx Alasg
----Braking System:
* Wabco EBS
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizing unit
----Drawbar / Drawbar Eye:
* Height-adjustable, hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange drawbar eye
----Electrics / Lighting:
* RDÜ tire monitoring system
* LED lighting
* 15-pin plug connector
----General Attachments:
* Toolbox made of galvanized sheet steel, mounted on the right side
* Bolt-on underrun protection
* Quarter mudguards made of plastic
* Jost mechanical landing gear at the front
* Rear: 2 mechanical, hot-dip galvanized fold-down supports
----Tipper Body:
* Net hooks on the sides and rear in the central locking mounts as well as 3 units on the front wall exterior
* Hot-dip galvanized chassis
* Steel platform, 3-way tipper body
* Continuous side walls, drop-down without central stanchion, with drop-side spring assist
* Tailgate, drop-down and swinging with manual central locking
* Hot-dip galvanized bolted rear stanchion
* 4 mm steel floor plate
* Rear guide rail for drive-on ramps
----Load Securing:
* 1 x 5 t recessed, folding lashing ring in each corner
* 4 x 3 t recessed and folding lashing rings in the outer frame on each side
----Ramps:
* 1 pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the loading area, recessed into the chassis from the rear
----Tires:
* Tires 235/75 R 17.5
----Paintwork:
* Axles, springs, air tanks, drawbar, and landing gear painted in black tone
* Drop-side paintwork in RAL 9010 pure white
* Paint finish for side walls in any RAL color available at extra cost
* Floor and front wall hot-dip galvanized
----Information:
* Reinforced body with load securing certificate in accordance with EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Immediately available ex Egestorf
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalT 3 3 Achs Tieflader- Anhänger
Çağrı
Koşul: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2010, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Vehicle is being sold on behalf of a customer. Some wooden planks are damaged. 17 pairs of lashing rings. Loading height approx. 900 mm. -- Typographical errors, mistakes and alterations reserved, sample images -- More data at: !, More Details: !
Ledpfsy Tll Sox Alajhg
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalT 3 3 Achs Tieflader- Anhänger
Çağrı
Koşul: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2010, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Vehicle is being sold on behalf of a customer. Some wooden planks are damaged. 17 pairs of lashing rings. Loading height approx. 900 mm. -- Typographical errors, mistakes and alterations reserved, sample images -- More data at: !, More Details: !
Lhjdpfxoy Ryb Ns Alaog
Küçük ilan
Koenigs-Wusterhausen
2.227 km
Alçak şasi römork
MÜLLER-MITTELTALTieflader T 4 Profi 40,0 Tiefladeranhänger hydr.
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 02/2020, bir sonraki muayene (TÜV): 02/2027, yükleme alanı uzunluğu: 9.800 mm, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, * ABS
* Rear support
* BPW ECO-Plus axles
Lsdpfxjy T Dh Sj Alashg
* Amber rotating beacon
* Alloy wheels
* Duomatic air coupling
----Body: Galvanized low-loader trailer (2500+7300mm)/Loading height approx. 900mm, rear sloped/Ramp height approx. 770mm, steel/wood floor with anti-slip covering, extendable to 3 meters, hydraulic loading ramps (folded for low loading angle) with anti-slip covering, also hydraulically laterally adjustable, lashing rings
Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE !!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. The basis for all purchase contracts, invoices, proforma invoices, orders, and sales discussions are our terms and conditions (see imprint).
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal tandem tieflader- tiefbett, 5,5 m - durchfahrbar"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 858 95 507
+49 201 858 95 507
Şimdi ilan ver
*ilan başına/ay































































































































































































































































































































































































