Kullanılmış Müller-Mitteltal Tandem Tieflader- Tiefbett, 5,5 M - Durchfahrbar satın al (45.727)

Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flanged towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flanged towing eye ----Lighting / Electrics: * RDÜ (Tire Pressure Monitoring System) * LED taillights 12/24 V * 15-pin electric connector ----General Attachments: * Jost landing gear at front * External hot-dip galvanized folding support legs at rear * Plastic toolbox, front right outside on front wall * Side underrun protection * Plastic quarter mudguards Fodpfxepk Dv Rs Aqijpi ----Low-bed loading area: * 50 mm softwood floor * Preparation in front of bulkhead for later installation of container locks * Bolt-on smooth steel front wall * Side walls made of trapezoidal steel sheet, foldable, with drop side lifting device * Steel rear wall, insertable between ramp mounts; when not in use, stored inside in front of bulkhead * Bolt-on rear stanchions * Rear approach angle approx. 860 mm ----Load securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Provision for fitting 3 t lashing rings every 600 mm * In each corner at front and rear: 1 x 6.3 t lashing ring * Various drilled holes for 1.2 t lashing points in front and rear crossmembers ----Ramps: * One-piece mechanical grid ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (collapsible to 20 mm width) ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, tailgate, and ramps * Drop side color in RAL 9010 pure white * Painting of side walls in a RAL color of your choice available at extra cost ----Info: * --Reinforced and certified body according to EN 12642 XL, including load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durum: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Tow Bar / Flange Drawbar Eye: * Height-adjustable tow bar (+/- 150 mm) * 40 mm bolted drawbar eye ----General Attachments: * Jost landing gear at the front * Side underrun protection * Foldable rear A-plate ----Electrics / Lighting: * 15-pin electrical connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding sheet metal plate 750 x 1,000 mm at the front, including 2 removable trough stops at the front, insertable in 2 positions * Rear traverse for mounting aluminum loading ramps, including 2 additional rear drop stands ----Loading Edge: * Unladen loading height approx. 710 mm ----Load Securing: * 4 repositionable trough stops, insertable in 2 positions for lateral centering of the troughs Fpodpfsl Th Dmjx Aqiei * On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, tow bar, and rear drop stands hot-dip galvanized * Axles, springs, landing gear, and air tanks painted in black ----General Information: * Vehicle has a one-day registration in 06/2024 due to missing tire pressure monitoring system, and has not been loaded or used * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf on the A7

Durum: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E braking system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake coupling ----Axle: * 2 x ton SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with ride height +30 mm via actuator cylinder * Start-up assist for manoeuvring and forced lowering to the first axle – controlled via speed-dependent EBS electronics – (no truck-side installation required, includes cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flanged towing eye – height-adjustable by +77 mm and -33 mm – for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary socket * LED lighting system 12 / 24V * 2 LED reversing lights, activated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Radio remote power supply 12+24 V via tail light ----General Attachments: * BPW landing gear front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminium rims * Drop-in-pin towing coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell individual mudguards * Two-step access in front of the bulkhead, left side * Shovel and broom holder in front of the bulkhead * 2 stainless steel toolboxes – matt finish – approx. 650 x 350 x 320 mm, right-hand side * Enclosed side underrun protection can be used as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor) rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right-hand side front) with operation via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame made of high-tensile fine-grain steel * 20,000 kg pulling force * Hook height 1,570 mm * Control of the hooklift device via remote control * Remote control with fast function when unloading but not when loading * Emergency stop buttons on both left and right sides * Container saddle with 4 supports per side and 1 roller at the rear per side * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist with main arm lifting * 2 x mechanical drop-down supports at the rear * Approved for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the charging cradle, the service brake must be applied to enable wireless release. The brake connections must remain coupled in order to operate the hydraulically/pneumatically controlled valves. * Monitoring system for underrun protection to ensure it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, step, underrun protection and drop supports hot-dip galvanized * Axles, air tanks, front landing gear painted in black Fpedpox Dp Atsfx Aqisi * Palfinger hooklift painted black/yellow ----Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is available immediately

Durum: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E brake system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake connection ----Axle: * 2 x SAF axles, rated at required tonnage * First axle configured as a lift axle (fully automatic) Fsdpox Dp Agsfx Aqijpi * Lift axle with ride height +30 mm via control cylinder * Start-assist function for maneuvering and forced lowering to the first axle — switchable via speed-dependent EBS electronic system (no installation required on the truck side, with additional cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering via radio remote control ----Drawbar / Flange Towing Eye: * 50 mm bolted flange towing eye — height-adjustable by +77 mm and -33 mm — for 2 t support load ----Electric / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights, actuated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * Extended connection cables for agricultural and forestry vehicles * Wireless power supply 12V + 24V via tail light circuit ----General Attachments: * BPW support winch at the front * Mechanically extendable underride guard for container lengths over 6,000 mm * Speedline diamond-finish aluminum rims * Detachable pin-type towing coupling (use only with retracted underride guard) * Enclosed plastic half-shell single mudguards * Two-step access ladder in front of the bulkhead, left side (direction of travel) * Shovel and broom holder in front of the bulkhead * 2 matte stainless steel toolboxes approx. 650 x 350 x 320 mm, mounted laterally on the right * Enclosed side impact protection, usable as advertising space ----Hydraulics: * Dual-circuit hydraulic connections (engine side from truck/tractor), rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right, direction of travel) with remote control operation ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift device (serial no. 100746129, year 2023) * Main frame constructed from high-strength fine-grain steel * 20,000 kg lifting capacity * Hook height 1,570 mm * Hooklift operation controlled by radio remote * Remote with fast function for unloading, but not for loading * Emergency stop switches on both left and right sides * Container supports: 4 lateral supports per side and 1 rear roller each side * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist main arm lifting * 2 mechanical drop supports at the rear * Approval for 20 tonnes gross vehicle weight (2 x 9 t axles) and 2 t support load * Note: If the remote control is removed from its charging station, the service brake must be applied to enable radio operation. Brake connections must remain connected at all times to allow electro-hydraulic/pneumatic valves to open * Monitoring system for underride guard to ensure it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lift axle lowered ----Paintwork: * Chassis, drawbar, step, underride protection, and support legs hot-dip galvanized * Axles, air tank, and front support winch painted in black * Palfinger hooklift painted in black / yellow ----Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is available immediately

Durum: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles Fedpfx Aqel Thv Reispi ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and adjustable height mechanism ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring), display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Tool box made of powder-coated sheet steel, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets made of galvanized sheet metal, approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic impact buffer * Mechanical drop-down supports at the rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll containers * Steel floor with wheel recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point locking clamps and mechanically insertable front stops in the rail, cargo securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a max. volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops inserted with pivoted stop * Weld bead as anti-slip coating in the run-up ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning equipment for positive and frictional securing of skips * 4 lashing cleats each in cloverleaf design (side) * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminum approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible total weight of 20,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. CW 44 / 2026

Durum: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 18.0: * 3-in-1 functionality: suitable for roll-off containers, skip containers, and as a low loader Fpjdpfx Asl Thwcsqiji ---- Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release for spring-loaded cylinders ---- Axles: * 2 x 12 t Gigant axles ---- Suspension: * Parabolic springs ---- Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and height adjustment mechanism ---- Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS display capability in the truck via EBS signal (no truck-side installation required) ---- General Attachments: * Toolbox made of powder-coated steel sheet, mounted on the right side * Side underrun protection * Quarter plastic mudguards with spray protection * Storage box for container nets, made of galvanized sheet metal, approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic bump stops * Mechanical drop-down supports at rear --- Loading Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide roll-off containers * Steel floor plate with roller recesses in the bogie area * For roll-off container transport, possible container lengths from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking as well as mechanical plug-in stop angles at the front in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Including 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops often with swiveling stops * Welded seam as anti-slip coating in the ramp area ---- Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning elements for positive and non-positive securing of skips * 4 lashing brackets in cloverleaf design on each side * 1 pair of 13.4 t UVV lashing rings at the front ---- Ramps: * 1 pair of aluminum approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at rear) ---- Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible total weight of up to 20,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to errors and intermediate sale ---- Delivery Time: * Available from approx. calendar week 44 / 2026

Durum: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4: ----Braking System: * Wabco ABS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolted towing eye ----General Attachments: * Jost landing gear at the front * Side underrun protection * Foldable rear A-shield ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made from 50 mm softwood * 1 sliding plate 750 x 1,000 mm positioned at the front, incl. 2 moveable trough stops at the front (plug-in, 2 positions each) * Rear crossmember suitable for use with aluminum approach ramps, incl. 2 additional drop-down supports at the rear ----Loading Edge: * Unladen loading edge approx. 710 mm ----Load Securing: Fsdpfxjl Th Eys Aqiopi * 4 repositionable trough stops, can be plugged into 2 positions for lateral centering of the troughs * On each side: 1 x (13.5 t) UVV tie-down point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with equalizing chain and quick-shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized * Axles, springs, landing gear, and air reservoir painted in black ----General Information: * The vehicle has a day registration from 06/2024, has not been in use or loaded due to the absence of a tire pressure monitoring system * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately ex Egestorf on the A7

Durum: yeni, azami yük ağırlığı: 30.440 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0 ----Fren: * Wabco EBS-E (elektrikli fren sistemi) * Yaylı akümülatör silindirleri için acil serbest bırakma sistemi * Kampana frenler ----Akslar: * 4 x 11 tonluk Gigant akslar ----Süspansiyon: * Kaldırma ve alçaltma sistemi ve RtR vanası ile hava süspansiyonu ----Çeki Demiri: * 50 mm çeki borusu ve kademesiz yükseklik ayarı olan düz çeki demiri ----Elektrik / Aydınlatma: * EBS sinyali üzerinden kamyon ekranında görüntüleme imkanı olan lastik basıncı izleme sistemi -kamyon tarafında herhangi bir kurulum gerektirmez- * Aks yükü göstergesi için basınç sensörlü, bilgi aracı olarak kullanılan SmartBoard, her aks grubuna göre * 15 kutuplu elektrik fişi * LED arka stop lambaları * LED yanıp sönen lambalar (çıkarılabilir) arka kısımda ----Genel Ek Parçalar: * Ön ve arka kısımda uyarı levhası takımları * Yaklaşık 650 x 300 x 600 mm boyutlarında, galvanizli ve elektrostatik boyalı çelik sacdan yapılmış 2 x alet kutusu, sağ tarafta * Ön kısımda kapalı, plastik, tek çamurluk * Arka kısımda düz çelik çamurluk korumaları, her birinde sıçrama önleyici (püskürtme sisi azaltma) * Yan çarpma koruması ----Alçak Yatak Platformu: * 45° açılı köşeler ve 3 adet kapaklı, kilitlenebilir, gömülü saklama bölmeleri ile birlikte döner tabla platformunun ön kısmı 520 mm uzatılmıştır. * Döner tabla platformu üzerinde 50 mm, alçak yatak platformunda ise 60 mm kalınlığında iğne çam ağacı * Rampa alanında, 6.780 mm toplam alçak yatak uzunluğu dahil olmak üzere, ahşap zemin yerine 20 mm kalınlığında kauçuk kaplama * Sol ve sağ taraftaki rampa üzerinde, yaklaşık 860 mm uzunluğunda kauçuk kaplama * Her iki tarafta 4 adet bağlama noktası (ancak bağlama çubukları bulunmamaktadır), aynı zamanda 2 tonluk bağlama imkanı ----Şasi: * Yüksek mukavemetli ince taneli çelikten yapılmış şasi ----Yük Sabitleme (Lasi - Paket): Döner Tabla Platformu: * Döner tabla platformunun dış çerçevesinde 2 çift 13,4 tonluk bağlama noktası Alçak Yatak: * Her iki tarafta, dış çerçevede, aşağı indirilebilen ve her yönde yüke dayanabilen 4 çift 10 tonluk bağlama noktası * Arka kısımda, her iki tarafta, dönebilen 2 çift 13,4 tonluk bağlama noktası ----Rampalar: * Katlanabilir rampaların üzerinde kauçuk kaplama * Hidrolik olarak katlanabilen rampalar, hidrolik olarak açılabilen uç kısmı, yaklaşık 4.650 x 720 mm boyutlarında * Hidrolik yan rampa kaydırma ve yük tutma vanaları ----Arka Destek: Fpsdpfxeylfvmj Aqiei * Hidrolik arka destek ----Genişletme: * 3 metre toplam genişlik için 8 çift galvanizli katlanabilir destek ayağı (ancak arka rampada bulunmamaktadır) * Genişletme panoları, sol tarafta bir saklama bölmesinde saklanır ----Kazıcı Kolu Tutucu: * Arka aksın üzerinden, rampa sonuna kadar, yaklaşık L=2.100 mm x G=740 x D=190 mm boyutlarında kazıcı kolu tutucu * Kazıcı kolu tutucusunun her iki yanında 2 çift 6,4 tonluk bağlama noktası ----Hidrolik: * Römork üzerinde hidrolik debi ayırıcı (kamyondaki hidrolik pompa gücü 40 - maksimum 120 litre/dakika olduğunda) ----Yükleme Ölçüleri: * Arka yükleme alanı: yaklaşık 6.780 x 2.520 mm (860 mm'lik rampayı içerir) * Döner tabla üzerinde yükleme alanı: yaklaşık 2.990 x 2.520 mm ----Yükleme Yüksekliği: * Yük altında yaklaşık 890 mm, +/- 20 mm ----Boya: * Yan ve arka kısımda yansıtıcı şeritler, * Şasi, döner tabla, rampalar ve katlanabilir destek ayakları sıcak daldırma galvanizli * Akslar, çeki demiri, hava tankı ve döner tabla, siyah tonunda boyalı ----Bilgiler: * Üretici garantili yeni araç * Hatalar ve ön satış mahfuzdur ----

Durum: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height increases by +30 mm when lifted) * Last axle steered (axle steering lock for maneuvering can be engaged from the driver’s cab without truck-side installation or additionally via a switch on trailer). The lock must be disengaged before entering public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (requires truck-side installation), with speed-dependent activation via EBS control ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring system, displayable in truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * Removable LED beacon at the rear ----General Attachments: * Mechanical warning sign package for 3 m total width * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, mounted left side * Front plastic mudguards and rear galvanized steel mudflaps ----Low Loader Deck: * Gooseneck turntable platform with 45° corners and 3 storage compartments with lockable folding lids (rear-opening) * Shortened lowbed platform by 500 mm to 6,280 mm including extended stepped contour, 500 mm forward * Rubber lining on folding frame, drive-on slope and load-bearing surface on the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess Fjdpfxsl Tihuj Aqijpi ----Load Securing (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing points per side (front & rear corners) * 5 x 10 t UVV lashing rings per side (pivoting, retractable, loadable in all directions) * 4 stake pockets per side, also providing 2 t lashing capability each * 1 x 16 t UVV lashing point on the rear traverse ----Widening: * Extendable and foldable extension arms for up to 3 m total width (deck board holder under the chassis, right side) ----Excavator Stick Recess: * Fully continuous, reinforced profile from last axle to rear cross member. Approx. L=2,350 x W=770 x D=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for truck hydraulic pump outputs over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Load area above turntable: 2,600 + 390 x 2,520 mm * Lowbed area: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Paintwork: * Chassis, turntable, drawbar, extension consoles, and loading ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Notes: * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: Immediately available*

Durum: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring brake chambers * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm with axle lifted) * Last axle with trailing steering (lockable from cab for shunting without truck-side installation, additionally lockable via switch on the trailer). Lock must be deactivated before entering public roads. * Forced relief as well as forced lowering of lift axle for manoeuvring purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon at rear ----General Attachments: * Mechanical warning sign kit for 3 m overall width * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, on left side * Plastic fenders at front axle, galvanized sheet steel fender skirts at rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear) * Shortening of the low-loader platform by 500 mm to 6,280 mm including extended offset bending by 500 mm to the front * Rubber coating on folding frame, approach slope, and running surface of low loader platform * Bamboo timber between longitudinal beams in front of excavator stick rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings in the front corners * 2 x 13.4 t UVV lashing points front and rear on each side * 5 x 10 t UVV lashing rings on each side (pivoting, lowerable, and loadable from all directions) * 4 stake pockets per side, each with 2 t lashing option * 1 x 16 t UVV lashing point at rear cross member ----Widening: * Extendable and foldable widening arms for 3 m overall width (plank holder under the chassis on front right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on the side in the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and deployable pointed section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support Fjdpfx Aqjxptn Doiepi ----Hydraulics: * Hydraulic flow divider (for hydraulic pump performance in truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Deck Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope ----Paintwork: * Chassis, turntable, drawbar, widening consoles, access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: Available immediately*

Durum: yeni, azami yük ağırlığı: 30.440 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0 ----Fren Sistemi: * Wabco EBS-E (elektronik fren sistemi) * Yaylı akümülatör silindiri için acil serbest bırakma mekanizması * Kampana frenler ----Akslar: * 4 x 11 tonluk Gigant akslar ----Süspansiyon: * Kaldırma ve alçaltma sistemi ve RtR valfi ile hava süspansiyonu ----Çekme Çubuğu: * 50 mm çekme pimli ve kademesiz yükseklik ayarına sahip düz çekme çubuğu ----Elektrik / Aydınlatma: * EBS sinyali üzerinden kamyonun ekranında görüntüleme imkanı olan lastik basıncı izleme sistemi -kamyon tarafında herhangi bir kurulum gerektirmez- * Aks yükü göstergesi için basınç sensörleri içeren SmartBoard bilgi aracı (her aks grubu için) * 15 kutuplu elektrik fişi * LED arka stop lambaları * LED çok yönlü aydınlatma lambaları (çıkarılabilir), arka kısımda ----Genel Montaj Parçaları: * Ön ve arka kısımda uyarı tabelası takımları * Sağ tarafta, yaklaşık 650 x 300 x 600 mm boyutlarında, galvanizli ve toz boyalı çelik sacdan yapılmış 2 adet alet kutusu * Ön kısımda kapalı, plastik tek çamurluk * Arka kısımda düz çelik çamurluklar, her biri sıçratma koruması ile (püskürtme önleme) * Yan yana çarpma koruması ----Alçak Yatak Platformu: * Döner platformun ön kısmı 45°'lik köşeler ve 3 adet gömülü depolama bölmesiyle (kapak dahil) 520 mm uzatılmıştır ve kilitlenebilir * Döner platformun üzerindeki zemin, 50 mm kalınlığında iğne yapraklı ağaçtan, alçak yatak platformu ise 60 mm kalınlığında iğne yapraklı ağaçtan yapılmıştır. * Rampa alanında, ahşap zeminin yerine 20 mm kalınlığında kauçuk kaplama, toplam 6.780 mm uzunluğunda bir alçak yatak ve rampa eğimi dahil * Rampa eğiminin sol ve sağ tarafında yaklaşık 860 mm uzunluğunda kauçuk kaplama * Her iki yanda 4 adet tutma yuvası (ancak tutma çubukları mevcut değildir) ve aynı zamanda 2 tonluk sabitleme imkanı ----Şasi: * Yüksek mukavemetli, ince taneli çelikten yapılmış şasi ----Yük Sabitleme (Lasi - Paketi): Döner Platform: Fedpsylfvgefx Aqiepi * Döner platformun dış çerçevesinde 2 çift 13,4 tonluk sabitleme halkası Alçak Yatak: * Her iki yanda, dış çerçevede, aşağı indirilebilen ve her yönden yüke dayanabilen 4 çift 10 tonluk sabitleme halkası * Arka kısımda her iki yanda, dönebilen 2 çift 13,4 tonluk sabitleme halkası ----Rampalar: * Katlanabilir rampalarda kauçuk kaplama * Hidrolik olarak katlanabilir rampalar, hidrolik olarak açılabilen bir uç bölümle yaklaşık 4.650 x 720 mm * Hidrolik yan rampa kaydırma ve yük tutma vanaları ----Arka Destek: * Hidrolik arka destek ----Genişletme: * 3 metre toplam genişlik için 8 çift galvanizli katlanabilir destek ayağı (ancak arka eğimde değildir) * Genişletme tahtaları, sol tarafta bir depolama bölmesinde saklanır. ----Kazıcı Kolu Rafı: * Arka aksın üzerinde, rampa eğiminin sonuna kadar, yaklaşık L=2.100 mm x B=740 x T=190 mm boyutlarında kazıcı kolu rafı * Kazıcı kolu rafında her iki yanda 2 çift 6,4 tonluk sabitleme halkası ----Hidrolik: * Treylerde hidrolik debi ayırıcı (kamyondaki hidrolik pompa kapasitesi 40 - maksimum 120 ltr./dakika'dan fazla ise) ----Yükleme Ölçüleri: * Arka yükleme alanı: yaklaşık 6.780 x 2.520 mm (860 mm rampa eğimi dahil) * Döner platform üzerindeki yükleme alanı: yaklaşık 2.990 x 2.520 mm ----Yükseklik: * Yüklenmiş halde yaklaşık 890 mm, +/- 20 mm ----Boya: * Yanlarda ve arkada yansıtıcı şerit * Şasi, döner platform, rampalar ve katlanabilir destek ayakları sıcak daldırma galvanizli * Akslar, çekme çubuğu, hava tankı ve döner platform koyu renk boyayla boyanmıştır. ----Bilgiler: * Üreticinin garanti kapsamındak

Durum: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General fittings: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted externally to the right front bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Fixture in front of bulkhead for subsequent installation of container locks * 400 mm bolt-on smooth steel front bulkhead * Bolt-on rear stanchions * Drop sides with spring assist ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various holes in front and rear crossmember for 1.2 t lashing option * Profifix lashing rail installed centrally in longitudinal axis for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps approx. 2,750 x 600 mm (can be collapsed to 20 mm gap) * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 l/min up to max. 140 l/min) ----Paintwork: Fodpfjrwc R Asx Aqijpi * Chassis, drawbar, front bulkhead, mechanical drop supports, and ramps galvanized * Axles, springs, air tank, front support winch, and flange towing eye painted black * Drop sides painted in RAL 9010 pure white * Side walls painted in any RAL color at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Immediately available from Egestorf

Durum: yeni, azami yük ağırlığı: 13.490 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, TRA-Kombi 18.0: * 3-in-1 – suitable for hooklift, skip containers, and as a low-loader ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5-ton axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment mechanism ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System), displayable in truck via EBS signal (no truck-side installation required) * LED tail lights 12/24 V * 15-pin electrical connector ----General Attachments: * Tool box made of powder-coated steel plate * Spare wheel carrier in basket design on right-hand side * Enclosed side underrun protection * Quarter mudguards with splash guards made of plastic * Plastic rear impact protection buffers * Folding A-board at rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame to guide roll containers * Steel plate floor with roller recesses in the bogie area * Suitable for hook lift container transport, container lengths from 5,500 – 7,000 mm * Pneumatic four-point clamping lock and mechanically inserted front stops in the guide rails * Transport of up to 2 skip containers with max. 10 m³ possible * Eight repositionable skip stops for side centering. The front four can be inserted and are pivotable. * Weld seam as anti-slip coating in the inclined ramp area * Mechanical rear drop-down supports ----Load Securing: * 3 pairs of 10-ton UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of skips; each side with 4 cloverleaf lashing brackets * 1 pair of 13.4-ton UVV lashing rings facing towards the front * Four 8-ton lashing eyes per side integrated into the outer frame ----Ramps: * Aluminium loading ramps (10.6 ton/pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Painting: * Reflective contour tape, sides and rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 Fodpowb Rakofx Aqiopi * Permissible gross weight of 20,000 kg technically possible * New vehicle, unregistered, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egstorf

Durum: yeni, azami yük ağırlığı: 13.410 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, yükleme alanı hacmi: 11 m³, Üretim yılı: 2026, * KA-TA-R 18.0 ML * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display capability in the truck’s dashboard via EBS signal (installation on the truck side not required) * 2 x 9 t Gigant axles * Air suspension with level control during tipping operation * Drawbar with 50 mm flange eye (adjustable by +77 mm and -33 mm via offset plate) * Jost landing gear at the front * Foldable galvanized steel underrun protection for paver feeding * Closed individual plastic fenders * Standing platform at the front wall * Manual roll-up tarpaulin * 15-pin electrical connector * LED tail lights with galvanized protective cover * 2 LED reversing lights * Chassis made of fine-grain steel * Steel three-way tipper body (side walls with MM profile – continuous without central stanchion – side walls pendulum-mounted via manual central locking, left side foldable with wall spring assist) * Roll tarp similar to RAL 7038 agate grey, with tarp tensioning by side ratchets and front and rear tensioning rubbers * Front wall platform of grating with step at the drawbar and a hand grip on the front wall * Tailgate made of HBW 400 steel, pendulum-mounted with automatic double claw lock * 5 mm steel floor from HBW 450 steel * Each side with 4 x 3 t recessed and foldable lashing rings – integrated in the steel floor * Reinforced and certified structure according to EN 12642 XL including cargo securing certificate up to 19 t * Side wall painting in a RAL color of your choice (excluding special or metallic paints) – color can be changed up to approx. 6 weeks before delivery * Axles, air tanks, landing gear, flange towing eye painted in black tone * Chassis, underrun protection and drawbar hot-dip galvanized Fedpfxexl Nkge Aqiopi * New vehicle with full manufacturer’s warranty * Errors and prior sale excepted * Available from approx. week 44 / 2026

Durum: ikinci el, boş ağırlık: 4.500 kg, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/2015, bir sonraki muayene (TÜV): 07/2025, yükleme alanı uzunluğu: 4.800 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 1.000 mm, renk: mavi, Üretim yılı: 2015, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, * German trailer * Condition as shown in photos * Müller-Mitteltal 3-way tipper, type KA-TA-R 18.0 tandem * Tipper dimensions: 4,800 x 2,400 x 1,000 mm * Roll tarp * Air suspension * Disc brakes * Platform * Jost support leg * Permissible load: 13,500 kg If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. Fedpfjwz H Nbsx Aqiepi You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods to avoid any misconceptions about the condition and suitability by the buyer. Inspections and examinations are possible at any time by appointment and are expressly encouraged. All information is without guarantee. No liability is accepted for mistakes or incorrect details in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Durum: ikinci el, azami yük ağırlığı: 9.050 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2014, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 1.100 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 11.900 kg Boş ağırlık: 2.850 kg Yük kapasitesi: 9.050 kg Toplam uzunluk: 7.400 mm Yükleme uzunluğu: yaklaşık 5.500 mm Genişlik: 2.550 mm / Yükleme genişliği yaklaşık 2.430 mm Yükleme yüksekliği: yaklaşık 1.100 mm Diğer bilgiler - Çeki oku yükseklik ayarlı - Ön destek ayağı yükseklik ayarlı - 800 mm yan ve arka kapak katlanabilir - Bölünmüş yan paneller, Kinnegrip K20 - BPW akslar Fpsdpfx Aqezc Dnvsisi - Havalı süspansiyon - Takozlar Araç reklamla kaplanmış ve/veya yazılı olabilir.

Durum: ikinci el, azami yük ağırlığı: 8.750 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, toplam genişlik: 2.550 mm, Üretim yılı: 2023, Müller Mitteltal KA-TA-R 11.9 Tandem Three-Way Tipper with Many Extras. Gross weight: 11,900 kg. Standard payload approx.: 8,750 kg. Internal dimensions: 5,000 x 2,420 x 500 mm. Tyres: 385/55R19.5. 4-coat single-colour paint. Wheels: silver. Chassis/underrun protection: hot-dip galvanized. Platform with front wall: hot-dip galvanized. Axles/springs/air tank etc.: black. Side and rear walls: RAL 2011 deep orange. Reinforced and certified body according to EN 12642 XL incl. load securing certificate (only in combination with 500 mm high steel drop sides). Rear stakes bolted, hot-dip galvanized, no top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated laterally and at the rear in the central locking mounts of the base side wall, plus 2 units on the front wall. BPW axles instead of GIANT. Tipping platform with fixed front wall, hot-dip galvanized version, with bolted, galvanized rear stakes, no additional coating (not applicable with HARDOX floor). Due to the system, waviness may occur during hot-dip galvanizing, especially with large floor sheets; complaints regarding this are excluded from warranty coverage. Tyres 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, code 08.940, ramp length 3,570 mm required). 1 plastic toolbox, black, lockable, W=750 x H=350 x D=300 mm (45 kg capacity with even load), location: on right side of chassis frame in driving direction. 1 pair ALU loading ramps without wheel track (8 t/pair), 3,570 x 400 x 105 mm, suitable for rubber-tyred and tracked vehicles, 55 kg/unit. Two-step access in front of the front wall, on left in driving direction (hot-dip galvanized). Connection lines extended for agricultural and forestry tractors. Further information: Fjdpfx Aevy Tvtsqijpi New: No

Durum: ikinci el, azami yük ağırlığı: 7.100 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2007, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 1.100 mm, toplam genişlik: 2.550 mm, Araç / Üst yapı: Tandem üç taraflı damper Fedpfx Aqjyz H Azjiopi İlk tescil: 07/07 Toplam ağırlık: 10.000 kg Boş ağırlık: 2.900 kg Taşıma kapasitesi: 7.100 kg Toplam uzunluk: 6.900 mm Yükleme uzunluğu: 5.000 mm Genişlik: 2.550 mm / yaklaşık yükleme genişliği 2.450 mm Yükleme yüksekliği: yaklaşık 1.100 mm Diğer bilgiler - 40 km/s - 500 mm yan paneller - 500 mm galvanizli ön ek - Yük yüzeyinde 7 çift sabitleme halkası - Üst yapı dışında 4 çift sabitleme halkası - Destek ayağı - Arka destek - Yan panel kaldırma yayı - Opsiyonel rampalar 1.280,00 €

Durum: ikinci el, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 13.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2007, bir sonraki muayene (TÜV): 04/2027, toplam genişlik: 2.550 mm, toplam yükseklik: 1.500 mm, Donanım: ABS, * Air suspension ----* Tire size: 285/70R22.5 * Technical gross weight: 13,500 kg * Unladen weight: 2,550 kg * Overall length: 6,600 mm * Safety inspection (SP) due: 10/2026 Fpsdpfx Aozb Avioqiei ----Vehicle number: 12150----Errors and prior sale excepted----Advertising and various decals have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle—simply let us know your wishes and suggestions, and we will take care of the rest. Among other things, for an additional charge, we can offer you the following services:----Trade-in of your old vehicleTÜV/SP certificationComplete export processingArrangement of financingApplication for export license platesTransport of vehiclesVehicle registrationRecovery and transportation of vehicles----Your VTS Team

Durum: ikinci el, azami yük ağırlığı: 23.900 kg, toplam ağırlık: 31.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2007, Üretim yılı: 2007, Dahili araç numarası: G400178 Kaufungen'deki tesisimizde hemen teslim edilebilir Daha fazla bilgi için: * Golec Nutzfahrzeuge GmbH (Almanca, İngilizce, Bulgarca, Rusça) * Viktoria Sologubova (Lehçe, Rusça, Ukraynaca, İngilizce) Boş ağırlık: 7.100 kg Toplam uzunluk: 10.800 mm Fsdezahg Depfx Aqiepi Azami izin verilen ağırlık: 31.000 kg Bilgi hatalarına karşı değişiklik hakkı saklıdır Kullanılmış aracınızı memnuniyetle takasa alıyoruz. Finansman doğrudan bizimle mümkündür. GOLEC NUTZFAHRZEUGE GMBH Konuşulan diller: Almanca, İngilizce, İspanyolca, Lehçe, Ukraynaca, Rusça, Bulgarca.

Durum: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform | Trailer Available in 37th week of 2026. Inquiry no.: 31941. Delivery to your address possible. * We are happy to provide a tailored offer. * ----- * Gross weight: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27 m x 2.47 m platform with galvanized 400 mm front wall * Digger bucket rest made of hardwood bolted to the front wall * Unladen deck height: 930 mm / Laden: 870 mm * One-piece ramps with hot-dip galvanized anti-slip grating, adjustable to approx. 20 mm width, secured by holding rods and diagonal supports * Ramp lift with vertically mounted, adjustable springs for convenient single-operator use * 4 UVV drop lashing rings (LC 6300 daN) * Perforated outer frame (45° angled, with lashing holes; lashing point load capacity LC 2000 daN at minimum 480 mm spacing). Installation of drop lashing rings LC 3000 daN approx. 600 mm apart possible. Tight crossmember spacing, high-profile front & rear ends with rear loading slope, hot-dip galvanized * 10 UVV lashing rings LC 3000 daN, retractable in the existing hole pattern on the outer frame, in addition * Additional lashing options via drilled holes (Ø 50 mm, LC 1200 daN) in front and rear beams * Toolbox mounted in front of the front wall * Side marker lights with indicator function * 50 mm thick softwood floor. Chassis hot-dip galvanized * Height-adjustable landing gear at the front, folding supports at the rear * 2 container locks recessed in the front crossmember * Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable. 50 mm towing eye available on request * 1 removable LED beacon at the rear ----- * Leasing, hire purchase, financing, trade-in available * Example: €525 per month, 60-month term, no down payment, no final installment ----- * Our opening hours: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 Outside of opening hours, appointments are possible by arrangement. Fpedpozbfmqsfx Aqioi We speak German, English, Polish, French. Leasing, financing, and trade-in available.

Durum: ikinci el, azami yük ağırlığı: 27.300 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2013, bir sonraki muayene (TÜV): 08/2026, yükleme alanı uzunluğu: 11.700 mm, yükleme alanı genişliği: 3.000 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.700 mm, Donanım: ABS, * Gooseneck with storage boxes * Self-steering axles * Hydraulic loading ramps * Widenable lowbed ----* Tire size: 235/75R17.5 * Gross vehicle weight: 42,000 kg * Curb weight: 8,700 kg * Overall length: 13,150 mm * Next safety inspection due: 02/2027 ----Vehicle number: 12148----Errors and prior sale excepted----Advertising and various stickers have been digitally removed.-----We are happy to assist you with all formalities involved in the purchase of a vehicle—simply let us know your requirements and suggestions, and we will take care of the rest. Among other services, we can offer you the following for an additional charge:----Trade-in of your old vehicle TÜV/safety inspection Complete export processing Financing arrangements Application for export license plates Vehicle transfer Vehicle registration Recovery and vehicle transport---- Your VTS Team Fpjdjza Rliepfx Aqiji

Durum: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0 ----Brake System: * EBS braking system * Emergency release for spring-actuated brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle equalization at the rear ----Drawbar: Fsdsl Th Nnepfx Aqiopi * Drawbar with 50 mm draw eye and height adjustment via tension spring & turnbuckle ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED tail lights 12 / 24 V * Removable beacon at the rear * 15-pin power connector ----General Attachments: * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front: enclosed plastic mudguards; rear: straight galvanized steel mud flaps, each with splash guards * Tool box made of galvanized steel sheet, black powder-coated, approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox on the turntable platform * Four stake pockets per side (stakes not included), each with integrated lashing option ----Load securing (La-Si package comprises): * 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions, recessed into the outer frame * 13.4 t at the corners, otherwise 10 t ----Widening: * 6 pairs of mechanical folding outriggers for a total width of 3 m (not at the rear chamfer) * Widening planks stored in the middle of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way valve block for retrofitting hydraulic side ramp displacement ----Loading area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm entry slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black ----Information: * Permissible gross weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: Immediately available ex Egestorf

Durum: ikinci el, azami yük ağırlığı: 8.750 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2026, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 970 mm, Üretim yılı: 2026, Donanım: ABS, Müller-Mitteltal KA-TA-R 11.9 ML / 024 Truck Tandem Three-way Tipper - Tipper body: 5,000 x 2,420 mm (internal dimensions) - Sidewall height: 500 mm - Floor made from fine-grain steel S 420 MC, 4 mm thick - Sidewalls laser-welded from fine-grain steel, front wall fixed - 2 pairs of folding lashing rings with lashing capacity LC 5,000 daN, one pair each recessed in the steel floor at the front and rear. 4 pairs of folding lashing rings with LC 3,000 daN recessed in the steel floor. - Mesh hooks integrated on both sides and rear in the sidewall mounts and in the front wall. - Reinforced and certified superstructure according to EN 12642 XL - 2 LED reversing lights at the rear of the trailer - Aluminium loading ramps without wheel tracks, suitable for rubber-tyred and tracked vehicles (8 t/pair), 3,310 x 400 x 105 mm - Plastic toolbox - Aluminium air reservoir - BPW axles with S-cam brakes - Tyres: 235/75R17.5 Suitable for coupling height approx. 925 mm unladen +/- 150 mm. Subject to prior sale and errors excepted! Sale exclusively in accordance with our Terms and Conditions (AGB) Fpsdpfxsy S Nwve Aqioi Important note ? Important Information: Despite careful verification of all details in our offer, errors may occur. Some may arise from transmission errors in the systems of various platform providers. Therefore, we explicitly point out that all specifications are made without guarantee and do not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 of the German Civil Code (BGB). It is merely information for contract initiation. The details provided here are without guarantee and do not represent warranted characteristics.

Durum: ikinci el, azami yük ağırlığı: 18.050 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2010, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, • Spring ramps • Spare wheel holder • 7 lashing rings per side • 4 stake pockets per side • 50 mm towing eye • Loading height: approx. 910 mm • Drum brakes • ABS • Leaf suspension • EBS • Twin tires Fsdpfoy T Tvxsx Aqiopi All information subject to change / prior sale reserved.