Kullanılmış Müller Mitteltal Ka-Ta-R 13,5 13,5 T Tandemkipper- Tieflader Aufsatzbordwände Breitbereift satın al (63.030)

Durum: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profi ----Brake System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and adjustable height ----Lighting / Electrics: * EBS multi-voltage system with 12 & 24 V wiring * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at rear * 2 LED reversing lights (activated via reverse gear) ----General Attachments: * Manometer – pressure gauge for payload determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: plastic quarter mudguards with splash protection * Rear axle: straight galvanized steel skirts with splash protection * Reflective contour tape on sides and rear * Tool box made of galvanized steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low Loader Platform: * Forepart in front of the turntable platform approx. 490 mm long with 45° corners * Robot-welded anti-slip coating on the turntable platform steel deck * Hardwood flooring on running surfaces of the low loader platform ----Load Securing (La-Si Package, consisting of): * In front of the bulkhead carrier left & right, each with 1 x 13.4 t UVV lashing ring * Four holes per side in the turntable platform, each with 2 t lashing capacity * 1 pair of 13.4 t lashing rings suspended at the rear left & right in front of the rear crossmember * Four pairs per side of 10 t foldable and lowerable UVV lashing rings, loadable in all directions, integrated into the outer frame * Three stake pockets per side, each with 2 t lashing option ----Widening Package: * Hot-dip galvanized mechanical folding outriggers for 3 m total width (not in the sloping rear) * Board holder for extensions mounted longitudinally under the chassis on the left ----Excavator Arm Rest: * Excavator arm rest from rear axle to end crossmember, approx. 2,100 mm long and approx. 190 mm deep * Two pairs per side of 6.4 t lashing rings in the excavator arm rest ----Ramps: * Single-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable side-to-side * Outer boards of the loading ramps made of hardwood * Steel structure prepped for 6-way control valve ----Loading Height: * Unladen loading height approx. 950 mm +/- 20 mm ----Tyres: * Tyres 235/75 R 17.5 ----Paint: * Chassis, turntable, folding outriggers, mechanical drop-down supports, and loading ramps hot-dip galvanized * Axles, air tanks, and drawbar painted in black ----Information: * Vehicle has a day registration dated 07/2024, due to the missing tire pressure monitoring system and has not been loaded or used * New vehicle with manufacturer's warranty * Subject to prior sale and errors Itjdel Tlhrepfx Ad Ish ----Delivery Time: * Immediately available ex Egestorf

Durum: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profi ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering function and RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment ----Lighting / Electrical System: * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at the rear * 2 LED reversing lights (switched by reverse gear) ----General Attachments: * Manometer - pressure gauge for determining load weight (axles separated over 2 air suspension circuits) * Side underrun protection * Swing-out supports at rear of chassis frame * Mechanically adjustable warning board sets front and rear * Front axle plastic quarter mudguards with spray protection * Rear axle straight galvanized steel mud flaps with spray protection * Reflective contour tape on sides and rear * Toolbox, black powder-coated galvanized steel, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low Loader Deck: * Extension in front of turntable platform approx. 490 mm long with 45° corners * ROBOT-WELDED anti-slip covering on steel plate of the turntable platform * Hardwood flooring on running surfaces of the low loader deck ----Load Securing (load securing package includes): * In front of the front wall carrier left & right, 1 x 13.4 t UVV lashing point each * 4 holes per side in the turntable platform, each with a lashing capacity of 2 t * 1 pair of lashing points (13.4 t) suspended at the rear left & right in front of the rear cross member * Per side 4 pairs of UVV lashing rings (10 t), swiveling and lowerable, loadable in all directions and recessed into the outer frame * Per side 3 stake pockets, each with a simultaneous 2 t lashing option ----Widening Kit: * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (except at the rear bevel) * Plank holders for extensions under the chassis, left side in longitudinal direction ----Excavator Arm Rest: * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4 t lashing points per side in the excavator arm rest ----Ramps: * Hydraulically operated, one-piece drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks on the ramps made of hardwood * Steel construction prepared for 6-function slider valve ----Loading Height: * Loaded edge (unladen) approx. 950 mm +/- 20 mm ----Tyres: * Tyres 235/75 R 17.5 ----Paintwork: * Chassis, turntable frame, folding outriggers, mechanical drop supports, ramps galvanized * --Axles, air tank, drawbar painted in black tone-- ----Info: * Vehicle has a temporary registration in 07/2024 due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Availability: * Immediately available from Egestorf Itjdpfx Ael Tnu Ajd Ioh

Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 14.4 ----Braking System: * Wabco EBS * Emergency release device for spring-type actuators * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable, hot-dip galvanized drawbar (adjustable by approx. 300 mm) with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear at the front * Two mechanical, hot-dip galvanized folding supports at the rear * Hot-dip galvanized, bolted underride protection * Tool box made of galvanized sheet steel, mounted on the right-hand side * Plastic quarter mudguards * Two-step entry on the left side for easy access ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power socket * LED rear lights ----Tipper Body: * Steel pallet 3-way tipper body * Continuous top side walls with internal tube reinforcement – without central stanchions – foldable with tailboard spring assist * Tailgate both fold-down and swinging, operates via manual central locking * Hot-dip galvanized, bolted rear stanchions * 4 mm fine-grain steel floor plate * Net hooks, guide rail at the rear for loading ramps * Prepared for later retrofit with side wall extensions Itodpfev Dz N Njx Ad Ioh ----Chassis: * Hot-dip galvanized chassis ----Load Securing: * 1 x 5 t lashing point in each corner and 4 x 3 t lashing rings recessed into outer frame on each side ----ALU Loading Ramps: * 1 pair of aluminum loading ramps (approx. 3,570 x 400 mm, load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps, installed in the chassis under the loading platform at the rear ----Tires: * Tires 385/55 R 22.5 ----Paintwork: * Axles, springs, air tanks, and landing gear painted black * Chassis, drawbar, floor, front wall, and folding supports hot-dip galvanized * Body side panels painted in customer-specified RAL color (no special or metallic finishes), color change possible until approx. 6 weeks before completion ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle, unregistered, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 29/2026

Durum: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and adjustable height mechanism ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring), display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Tool box made of powder-coated sheet steel, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets made of galvanized sheet metal, approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic impact buffer * Mechanical drop-down supports at the rear ----Loading Platform: Itsdpsl Thv Rofx Ad Ieh * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll containers * Steel floor with wheel recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point locking clamps and mechanically insertable front stops in the rail, cargo securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a max. volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops inserted with pivoted stop * Weld bead as anti-slip coating in the run-up ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning equipment for positive and frictional securing of skips * 4 lashing cleats each in cloverleaf design (side) * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminum approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible total weight of 20,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. CW 44 / 2026

Durum: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 18.0: * 3-in-1 functionality: suitable for roll-off containers, skip containers, and as a low loader ---- Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release for spring-loaded cylinders ---- Axles: * 2 x 12 t Gigant axles ---- Suspension: * Parabolic springs ---- Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and height adjustment mechanism ---- Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS display capability in the truck via EBS signal (no truck-side installation required) ---- General Attachments: * Toolbox made of powder-coated steel sheet, mounted on the right side * Side underrun protection * Quarter plastic mudguards with spray protection * Storage box for container nets, made of galvanized sheet metal, approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic bump stops * Mechanical drop-down supports at rear --- Loading Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide roll-off containers * Steel floor plate with roller recesses in the bogie area * For roll-off container transport, possible container lengths from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking as well as mechanical plug-in stop angles at the front in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Including 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops often with swiveling stops * Welded seam as anti-slip coating in the ramp area ---- Load Securing: Isdel Thwcjpfx Ad Isth * 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning elements for positive and non-positive securing of skips * 4 lashing brackets in cloverleaf design on each side * 1 pair of 13.4 t UVV lashing rings at the front ---- Ramps: * 1 pair of aluminum approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at rear) ---- Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible total weight of up to 20,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to errors and intermediate sale ---- Delivery Time: * Available from approx. calendar week 44 / 2026

Durum: yeni, azami yük ağırlığı: 31.900 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height setting ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required * SmartBoard as infotool with pressure sensors for axle load indication per axle group * 15-pin electrical connector * LED rear lights * LED beacon (removable) at the rear ----General attachments: * Warning sign packages front & rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, mounted right side * Front closed plastic single mudguards * Rear straight steel mud aprons each with spray protection (spray mist suppression) * Side underrun protection ----Low-loader platform: * Turntable platform extended by 520 mm with 45° corners and 3 recessed storage compartments including covers, lockable * Floor on turntable platform made of 50 mm and on low-loading platform of 60 mm softwood * 20 mm rubber overlay instead of wooden floor in trackway area, with a low-bed length of 6,780 mm including approach ramp * Rubber overlay on the approach ramp left and right, approx. 860 mm long * Each side with 4 pocket stakes (no stakes included) with simultaneous 2-ton lashing capacity each ----Chassis: * Chassis made of high-strength fine grain steel ----Load securing (Lasi package): Turntable platform: * 2 pairs of 13.4 ton lashing eyes in the outer frame of the turntable platform Low-bed: * Each side with 4 pairs of 10 ton drop-down lashing rings on the outer frame, loadable in all directions * Rear sides each with 2 pairs of 13.4 ton swing-out lashing rings ----Ramps: * Rubber overlay on folding loading ramps * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shift & load holding valves ----Rear support: * Hydraulic rear support ----Wideners: * 8 pairs of galvanized folding outriggers for 3 meters overall width (not included on the rear slope) * Widening planks stored in a compartment left side ----Digger stick recess: * Digger stick recess over the rear axle up to the end of approach ramp, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 ton lashing rings in the digger stick recess on each side ----Hydraulics: * Hydraulic flow divider in the trailer (with truck hydraulic pump output over 40 – max. 120 l/min) Itedpfeylfvmjx Ad Ioh ----Loading dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm approach ramp) * Loading area above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape, sides and rear * Chassis, turntable, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images may include special equipment ----Delivery time: * Vehicle is expected to be available from week 23/2026

Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 14.4 ----Braking system: * Wabco EBS * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles Itjdpfx Adel Th A Eo Ish ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Height-adjustable (approx. 300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Hot-dip galvanized bolted underrun protection * Tool box made of galvanized sheet steel, mounted on the right-hand side * Plastic quarter mudguards * Two-step access on the left side as climbing aid ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electric power connector * LED taillights ----Tipper body: * Steel pallet-type 3-way tipping body * Continuous top side walls with internal tube reinforcement – foldable, without centre stanchions, with drop-side torsion spring assist * Fold-down tailgate with manual central locking, can also be operated in swing mode * Hot-dip galvanized, bolted rear stanchions * 4 mm fine-grained steel floor plate * Lashing hooks, mounting rail at the rear for loading ramps * Prepared for retrofitting extension side panels ----Chassis: * Hot-dip galvanized chassis ----Load securing: * Each corner equipped with 1 x 5 t lashing ring, plus 4 x 3 t lashing rings recessed into the external frame on each side ----Aluminium loading ramps: * 1 pair of aluminium ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment underneath the loading surface, recessed into the chassis at the rear ----Tyres: * Tyre size 385/55 R 22.5 ----Paintwork: * Axles, springs, air tanks and landing gear painted in a black shade * Chassis, drawbar, floor, front wall, and folding supports hot-dip galvanized * Sideboards painted in RAL 9010 Pure White * Side wall paintwork in a RAL colour available at extra cost ----General Information: * Reinforced superstructure with EN 12642 XL load securing certificate * New vehicle, never registered, with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 29/2026

Durum: yeni, azami yük ağırlığı: 31.900 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height setting ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required * SmartBoard as infotool with pressure sensors for axle load indication per axle group * 15-pin electrical connector * LED rear lights * LED beacon (removable) at the rear ----General attachments: * Warning sign packages front & rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, mounted right side * Front closed plastic single mudguards * Rear straight steel mud aprons each with spray protection (spray mist suppression) * Side underrun protection ----Low-loader platform: * Turntable platform extended by 520 mm with 45° corners and 3 recessed storage compartments including covers, lockable * Floor on turntable platform made of 50 mm and on low-loading platform of 60 mm softwood * 20 mm rubber overlay instead of wooden floor in trackway area, with a low-bed length of 6,780 mm including approach ramp * Rubber overlay on the approach ramp left and right, approx. 860 mm long * Each side with 4 pocket stakes (no stakes included) with simultaneous 2-ton lashing capacity each ----Chassis: * Chassis made of high-strength fine grain steel ----Load securing (Lasi package): Turntable platform: * 2 pairs of 13.4 ton lashing eyes in the outer frame of the turntable platform Low-bed: * Each side with 4 pairs of 10 ton drop-down lashing rings on the outer frame, loadable in all directions * Rear sides each with 2 pairs of 13.4 ton swing-out lashing rings ----Ramps: * Rubber overlay on folding loading ramps * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shift & load holding valves ----Rear support: * Hydraulic rear support ----Wideners: * 8 pairs of galvanized folding outriggers for 3 meters overall width (not included on the rear slope) * Widening planks stored in a compartment left side ----Digger stick recess: * Digger stick recess over the rear axle up to the end of approach ramp, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 ton lashing rings in the digger stick recess on each side ----Hydraulics: * Hydraulic flow divider in the trailer (with truck hydraulic pump output over 40 – max. 120 l/min) ----Loading dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm approach ramp) * Loading area above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape, sides and rear * Chassis, turntable, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer's warranty Itedoylfvgopfx Ad Ioh * Errors and prior sale excepted * Sample images may include special equipment ----Delivery time: * Vehicle is expected to be available from week 23/2026

Durum: ikinci el, azami yük ağırlığı: 9.050 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2014, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 1.100 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 11.900 kg Boş ağırlık: 2.850 kg Yük kapasitesi: 9.050 kg Toplam uzunluk: 7.400 mm Yükleme uzunluğu: yaklaşık 5.500 mm Genişlik: 2.550 mm / Yükleme genişliği yaklaşık 2.430 mm Itsdpozc Dnvefx Ad Ish Yükleme yüksekliği: yaklaşık 1.100 mm Diğer bilgiler - Çeki oku yükseklik ayarlı - Ön destek ayağı yükseklik ayarlı - 800 mm yan ve arka kapak katlanabilir - Bölünmüş yan paneller, Kinnegrip K20 - BPW akslar - Havalı süspansiyon - Takozlar Araç reklamla kaplanmış ve/veya yazılı olabilir.

Durum: ikinci el, azami yük ağırlığı: 18.150 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2023, yükleme alanı uzunluğu: 8.300 mm, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, * ABS * 5-chamber rear lights * Duomatic air coupling * Gigant axles * Rear support Isdpszaln Sjfx Ad Ioth --- Superstructure: Low loader trailer (1,800 + 6,500 mm) / loading height approx. 920 mm, tapered at the rear / ramp height approx. 770 mm, steel/wood floor, hydraulic access ramps (galvanized), load capacity 15,000 kg/ramp, lashing rings and lashing eyes Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!! ALL INFORMATION PROVIDED WITHOUT WARRANTY, INCLUDING EQUIPMENT AND ACCESSORIES. All purchase agreements, invoices, proforma invoices, orders, and sales discussions are based on our General Terms and Conditions (see Legal Notice).

Durum: ikinci el, azami yük ağırlığı: 23.900 kg, toplam ağırlık: 31.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2007, Üretim yılı: 2007, Internal vehicle number: G400178 German vehicle Available immediately at our yard in Kaufungen - Kassel, Germany More INFO at: Itsdpfx Adjzahg Do Ieh * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Empty weight: 7,100 kg Total length: 10,800 mm Max. permissible weight: 31,000 kg Subject to errors and prior sale. We will gladly take your used vehicle in part exchange. Financing available directly through our company. GOLEC NUTZFAHRZEUGE GMBH Languages spoken: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Durum: ikinci el, azami yük ağırlığı: 30.100 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 02/2000, yükleme alanı uzunluğu: 10.600 mm, yükleme alanı genişliği: 2.750 mm, toplam genişlik: 2.750 mm, Müller Mitteltal TT40 Low Loader - Trailer: ---- * Manufacturer: Müller Mitteltal * Model: TT40 * First registration: 02 / 2000 Iodpfx Adozaylfe Isth * Gross vehicle weight: 40,000 kg * Unladen weight: 9,900 kg * Payload: 30,100 kg * 4-axle * Last axle steered * MOT / Inspection due! * Hydraulic ramps * Wooden planks in the low-bed section have been replaced previously * Inspection (MOT/TÜV) due * German registration * Total loading area: approx. 10.60 meters * Loading width: approx. 2.75 meters * Low-bed length: approx. 4.50 meters * Rear loading height: approx. 0.9 meters * Low-bed loading height: approx. 0.65 meters * Front neck loading height: approx. 1.05 meters * Additional photos on request (WhatsApp Erik) * Price: 12,900 Euro, net plus 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp All information provided without guarantee or warranty. Subject to errors and prior sale.

Durum: ikinci el, azami yük ağırlığı: 27.300 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2013, bir sonraki muayene (TÜV): 08/2026, yükleme alanı uzunluğu: 11.700 mm, yükleme alanı genişliği: 3.000 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.700 mm, Donanım: ABS, * Gooseneck with storage boxes * Self-steering axles * Hydraulic loading ramps * Widenable lowbed ----* Tire size: 235/75R17.5 * Gross vehicle weight: 42,000 kg * Curb weight: 8,700 kg * Overall length: 13,150 mm * Next safety inspection due: 02/2027 ----Vehicle number: 12148----Errors and prior sale excepted----Advertising and various stickers have been digitally removed.-----We are happy to assist you with all formalities involved in the purchase of a vehicle—simply let us know your requirements and suggestions, and we will take care of the rest. Among other services, we can offer you the following for an additional charge:----Trade-in of your old vehicle TÜV/safety inspection Complete export processing Financing arrangements Isdpfx Adsza Rlis Ijth Application for export license plates Vehicle transfer Vehicle registration Recovery and vehicle transport---- Your VTS Team

Durum: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at rear ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle ----Lighting / Electrical: * RDÜ Tire pressure monitoring system * Multi-voltage electrical system * LED tail lights 12 / 24 V * Removable rotating beacon at rear * 15-pin power connector ----General Attachments: * Side underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Stainless steel front mudguards (enclosed), as well as straight galvanized steel skirts at rear, each with splash protection * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Four stake pockets per side (stakes not included) with integrated lashing option ----Load Securing (La-Si-Package consisting of): * 2 lashing rings (6.4 t) front left and right on the main frame of the turntable platform Itsdpfx Ajl Th I Aed Ioh * 6 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame * In corners 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical folding extensions for 3 m total width (excluding rear taper) * Widening planks stowed in center of cargo area ----Ramps: * Hot-dip galvanized, single-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically width-adjustable * 4-way valve block for retrofit of hydraulic lateral ramp shifting ----Cargo Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm approach slope) ----Tyres: * 235/75 R 17.5 twin tires ----Unladen Weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0 ----Brake System: * EBS braking system * Emergency release for spring-actuated brake cylinders * Drum brakes Iodpfxol Th Nno Ad Ijth ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle equalization at the rear ----Drawbar: * Drawbar with 50 mm draw eye and height adjustment via tension spring & turnbuckle ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED tail lights 12 / 24 V * Removable beacon at the rear * 15-pin power connector ----General Attachments: * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front: enclosed plastic mudguards; rear: straight galvanized steel mud flaps, each with splash guards * Tool box made of galvanized steel sheet, black powder-coated, approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox on the turntable platform * Four stake pockets per side (stakes not included), each with integrated lashing option ----Load securing (La-Si package comprises): * 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions, recessed into the outer frame * 13.4 t at the corners, otherwise 10 t ----Widening: * 6 pairs of mechanical folding outriggers for a total width of 3 m (not at the rear chamfer) * Widening planks stored in the middle of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way valve block for retrofitting hydraulic side ramp displacement ----Loading area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm entry slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black ----Information: * Permissible gross weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: Immediately available ex Egestorf

Durum: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/1993, Üretim yılı: 1993, Donanım: ABS, - EBS Daha fazla bilgi için lütfen bizimle iletişime geçin. Ijdpfx Adoxt Rw Re Ioth

Durum: ikinci el, azami yük ağırlığı: 18.050 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2010, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, • Spring ramps • Spare wheel holder • 7 lashing rings per side • 4 stake pockets per side • 50 mm towing eye Iodpfsy T Tvxsx Ad Ioth • Loading height: approx. 910 mm • Drum brakes • ABS • Leaf suspension • EBS • Twin tires All information subject to change / prior sale reserved.

Durum: ikinci el, azami yük ağırlığı: 31.820 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/1980, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 3.000 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 900 mm, Üretim yılı: 1980, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal T4 Low-bed Trailer * SAF axles with drum brakes * Twin tires * Low-bed deck with platform extension * Hydraulic loading ramps, adjustable (2 units) * Drivable gooseneck * Additional rear supports * Turntable design ----Dimensions & Loading Platform * Loading platform length approx. 9,800 mm * Loading platform width: 2,550 - 3,000 mm * Loading platform height: 900 mm ----* Permissible total weight: 40,000 kg * Payload: 31,820 kg * Tyres: 235/75R17.5 ----Vehicle number: 11892 ----Errors and prior sale reserved ----Advertising and various inscriptions have been digitally removed. -----We are happy to assist you with all formalities arising from the purchase of a vehicle. Simply let us know your requests and suggestions, and we will take care of them. Among other things, we can offer the following services for an additional fee: ----Trade-in of your old vehicle TÜV or safety inspection Complete export processing Financing arrangement Application for export licence plates Vehicle transfer Vehicle registration Itjdpfxoy Skl Is Ad Ish Vehicle recovery and transport ?YOUR VTS TEAM

Durum: ikinci el, ilk tescil: 11/2006, Üretim yılı: 2006, MÜLLER - MITTELTAL T4 Kompakt Döner Tabla - Alçak Şasi Dorsesi, havalı süspansiyon ve teker çukuru ile - 4 x havalı süspansiyonlu GIGANT aks - havalı süspansiyonlu - 4 x teker çukuru - mekanik rampa - arkada 2 destek, katlanabilir - uzatılabilir uyarı levhaları - ABS - MICHELIN lastikler: 235/75 R 17.5 - ağır model: 40.000 kg azami yüklü ağırlık - boş ağırlık: 8.400 kg Iodpewmpbdefx Ad Ieth - toplam uzunluk: 11.750 mm - 50 mm çeki halkası Özellikle kalk freze makineleri taşımak için uygundur! - Alman römorku - Muayene / teknik kontrol istek üzerine ve ek ücretle mümkün! Hata ve ön satış hakkı saklıdır!

Durum: ikinci el, boş ağırlık: 8.680 kg, azami yük ağırlığı: 31.320 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 09/2018, süspansiyon: diğer, lastik boyutu: 235/75R17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5, arka lastik boyutu: 235/75R17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Kasnak halkaları, ABS, uyarı levhalı genişletme, araç talep üzerine satılmaktadır., -- Baskı hataları, yanlışlıklar ve değişiklik hakkı saklıdır, örnek resimler --, Daha fazla veri için: !, More Details: ! Itjdpfx Aozfgxbjd Ijh

Durum: ikinci el, boş ağırlık: 3.960 kg, azami yük ağırlığı: 10.440 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2020, yükleme alanı uzunluğu: 5.050 mm, yükleme alanı genişliği: 2.420 mm, süspansiyon: çelik, lastik boyutu: 385/55 R19,5 150/---J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/55 R19,5 150/---J, arka lastik boyutu: 385/55 R19,5 150/---J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Geniş taban lastik, sabitleme halkaları, rampalar için ek ücret: 800 €, araç vekâleten satılmaktadır., -- Yazım hataları, yanlışlıklar ve değişiklikler saklıdır, örnek görseller --, Daha fazla bilgi için: !, Ayrıntılı Bilgi: ! Iedpfx Adezfv I Es Ijth

Durum: yeni, boş ağırlık: 3.650 kg, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.120 mm, yükleme alanı genişliği: 2.420 mm, süspansiyon: çelik, lastik boyutu: 385/55 R 19,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/55 R 19,5, arka lastik boyutu: 385/55 R 19,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, 3 taraflı damperli kasa, yan duvarlar 600 mm yüksekliğinde, galvanizli, yükleme yüksekliği (yüklü) yaklaşık 990 mm, tabanda 4 adet 5 ton kapasiteli bağlama halkası, tabanda 8 adet 3 ton kapasiteli bağlama halkası, önde yük ve hızlı modlu güçlendirilmiş dişli tipi destek krikosu, geniş taban lastikler: 385/55 R 19,5, şasi: sıcak daldırma galvanizli, ek ücret karşılığında: alüminyum rampalar (yaklaşık 3.520 x 400 mm), her bir çift için taşıma kapasitesi 10 ton ve arka kısımda 2 adet katlanır destek, fiyat: 1.500 euro. -- Yazım hataları, değişiklikler ve yanlışlıklar söz konusu olabilir, örnek resimler -- Daha fazla bilgi için! Iodpfxozfv Hus Ad Ioth

Durum: yeni, boş ağırlık: 4.580 kg, azami yük ağırlığı: 14.420 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.700 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 1.800 mm, yükleme alanı hacmi: 24 m³, süspansiyon: diğer, lastik boyutu: 435/50 R 19,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 435/50 R 19,5, arka lastik boyutu: 435/50 R 19,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Three-way tipper, loading platform approx. 5,700 mm x 2,420 mm, drop sides 600 mm + two sets of 600 mm extension sides, total side wall height approx. 1,800 mm, drop sides hot-dip galvanized, loading height approx. 1,080 mm, 12 lashing eyes in floor, reinforced gearbox support winch with load and fast mode at front, two folding supports at rear, 435/50 R 19.5, chassis and tipper bridge hot-dip galvanized, surcharge for aluminum ramps: price: 1,600 euros. -- Subject to errors, omissions and changes, sample images -- Iedpfxszfk H Aj Ad Ieth More data at: ! More details: !

Durum: yeni, boş ağırlık: 4.460 kg, azami yük ağırlığı: 14.540 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, süspansiyon: diğer, lastik boyutu: 435/50 R 19,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 435/50 R 19,5, arka lastik boyutu: 435/50 R 19,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Üç yönlü damper, yan paneller 600 mm yüksekliğinde, galvanizli, yaklaşık 1.080 mm yükleme yüksekliği, zemine gömülü 4 x 5 tonluk bağlama halkası, zemine gömülü 8 x 3 tonluk bağlama halkası, önde yük ve hızlı modlara sahip güçlendirilmiş dişli vinç, 435/50 R 19,5 lastikler, şasi ve damper şasi sıcak daldırma galvanizli. Ek ücret ile: alüminyum rampalar (yaklaşık 3.500 mm uzunluğunda) ve 2 adet arka katlanır destek, fiyat: 1.700 Euro. Yazım hatası, yanlışlıklar ve değişiklik hakkı saklıdır, örnek resimlerdir. Daha fazla bilgi için: !, Daha fazla detay: ! Iodpfx Adjzfk Ime Ijth

Durum: yeni, boş ağırlık: 4.650 kg, azami yük ağırlığı: 14.350 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, süspansiyon: diğer, lastik boyutu: 435/50 R 19,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 435/50 R 19,5, arka lastik boyutu: 435/50 R 19,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, with hydraulic tailgate, three-way tipper, side boards 600 mm high, galvanized, loading height approx. 1,080 mm, 4 recessed lashing rings (5 t each) in the floor, 8 recessed lashing rings (3 t each) in the floor, reinforced gear support winch at the front with load and quick mode, 435/50 R 19.5, chassis hot-dip galvanized and tipper platform hot-dip galvanized or painted, surcharge for: aluminum ramps (approx. 3,500 mm long) and 2 fold-down supports at the rear, price: 1,700 euros, -- Subject to typographical errors, mistakes and changes, sample images --, More data at: !, More Details: ! Itsdpfx Aszfk Igsd Ish