Kullanılmış Müller-Mitteltal 14,4 To Tandem Tieflader 7 Mtr Mit Auffahrrampen satın al (44.330)

Koşul: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual rear lowering ----Axle: * 3 x 11 t Gigant axles * Center axle can be lifted ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Tool box made of powder-coated steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray suppression * Plastic rear bumper pads * Mechanical rear safety support legs ----Container / Low-loader Platform: * Hot-dip galvanized main frame with raised outer rails (approx. 25 mm higher) for guiding roll-off containers * Steel floor with roller depressions in the turntable area * For roll-off container transport, container lengths from 5,500 - 7,000 mm possible * Pneumatic 4-point locking system and mechanical plug-in end stops at the front of the running rails Fedpfx Astplv Teddegb * Load securing certificate as per DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 removable skip container stops for lateral centering, front 4 stops with swingable end stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on each side for attaching tie-down elements for positive and non-positive securing of skip containers * 4 cloverleaf-style lashing bars (each side) and 1 pair of 13.4 t UVV lashing rings to the front * Load securing certificates per DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Welded bead as anti-slip surface in the ramp track area * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Tires: * Tires: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides & rear * Axles, turntable, drawbar and air tanks painted in a shade of black * Hot-dip galvanized main frame ----Info: * Gross vehicle weight of 27,000 kg technically possible * New vehicle without initial registration, with manufacturer warranty * Errors and prior sale reserved ----Delivery Time: * Available from approx. week 47/2026

Koşul: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, * TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and adjustable height mechanism ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring), display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Tool box made of powder-coated sheet steel, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets made of galvanized sheet metal, approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic impact buffer * Mechanical drop-down supports at the rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll containers * Steel floor with wheel recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point locking clamps and mechanically insertable front stops in the rail, cargo securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a max. volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops inserted with pivoted stop * Weld bead as anti-slip coating in the run-up ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning equipment for positive and frictional securing of skips * 4 lashing cleats each in cloverleaf design (side) * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminum approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible total weight of 20,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale Fedpel Thv Refx Addegb ----Delivery Time: * Available from approx. CW 44 / 2026

Koşul: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, * TRA-Kombi 18.0: * 3-in-1 functionality: suitable for roll-off containers, skip containers, and as a low loader ---- Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release for spring-loaded cylinders ---- Axles: * 2 x 12 t Gigant axles ---- Suspension: * Parabolic springs ---- Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and height adjustment mechanism ---- Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS display capability in the truck via EBS signal (no truck-side installation required) ---- General Attachments: Fgsdpfxsl Thwcj Addsb * Toolbox made of powder-coated steel sheet, mounted on the right side * Side underrun protection * Quarter plastic mudguards with spray protection * Storage box for container nets, made of galvanized sheet metal, approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic bump stops * Mechanical drop-down supports at rear --- Loading Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide roll-off containers * Steel floor plate with roller recesses in the bogie area * For roll-off container transport, possible container lengths from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking as well as mechanical plug-in stop angles at the front in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Including 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops often with swiveling stops * Welded seam as anti-slip coating in the ramp area ---- Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning elements for positive and non-positive securing of skips * 4 lashing brackets in cloverleaf design on each side * 1 pair of 13.4 t UVV lashing rings at the front ---- Ramps: * 1 pair of aluminum approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at rear) ---- Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible total weight of up to 20,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to errors and intermediate sale ---- Delivery Time: * Available from approx. calendar week 44 / 2026

Koşul: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle with lift function ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & adjustable height device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) Fgodpjpk D Iisfx Addeb ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic impact protection buffers * Mechanical drop-down supports at the rear ----Container / Low Loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with wheel recesses in the bogie area * Suitable for roll-off containers with a container length of 5,500 - 7,000 mm * Pneumatic 4-point clamp-locking system plus mechanical plug-in front stops in the running rails * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip container stops for lateral centering, front 4 stops lockable with pivoting backstop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tension elements to secure skip containers positively and non-positively * 4 lashing rails per side (cloverleaf design) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Weld beads as anti-slip surface in the track area of the ramp slope * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tires: 235/75 R17.5 ----Loaded Platform Height: * Platform height loaded: approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Paintwork: * Contour tape, reflective, on sides and rear * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanized main frame ----Info: * Technical permissible total weight: 27,000 kg * New vehicle without first registration with manufacturer warranty * Subject to alterations and prior sale ----Delivery time: * Available from approx. week 47/2026

Koşul: yeni, azami yük ağırlığı: 13.830 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, Üretim yılı: 2026, * KA-TA-R 18 ----Braking System: * EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 9 t Gigant axles ----Suspension: * Air suspension with level control during tipping ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck dashboard via EBS signal -no truck-side installation required- * 15-pin power connector * LED lighting with galvanized protective cover * 2 LED reversing lights ----Drawbar / Towing Eye: * Drawbar with 50 mm flange-type towing eye (adjustable by +77 mm and -33 mm via offset plate) ----General Attachments: * Support winch at front * Foldable galvanized steel underrun protection for paver feeding * Closed single plastic mudguards * Front wall platform made of grating with access step at drawbar and handrails on the front wall Fgodpfx Asx Ipbysddob ----Chassis: * Chassis made of high-tensile fine-grain steel ----Tipping Body: * 3-way steel tipper body with asymmetrical continuous aluminium side walls - without central stanchion - swinging via manual central locking, can be folded down on the left with side board spring-assist * Tailgate - made of HBW 400 steel - swinging with automatic 2-claw locking * 5 mm steel floor made of HBW 450 steel ----Load Securing: * 4 x 3 t lashing rings per side - recessed and foldable - integrated into the steel floor ----Tarpaulin: * Rolling tarpaulin - agate grey similar to RAL 7038 - * Tarpaulin tensioning with side-mounted tensioning ratchets and elastic cords at the front and rear ----Painting: * Chassis, underrun protection, and drawbar hot-dip galvanized * Axles, air tanks, support winch, and flange-type towing eye painted in a black tone * Side panels painted in a RAL color of your choice (except special or metallic paint), changeable up to approx. 6 weeks before completion ----Information: * Reinforced and certified body according to EN 12642 XL incl. load securing certificate up to 19 t * New vehicle without initial registration including manufacturer's warranty * Subject to errors and prior sale * Sample images (photos may differ due to optional equipment) ----Delivery time: * Vehicle available from week 42/2026

Koşul: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – no installation required on the truck side * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Height-adjustable drawbar (~300 mm) with 40 mm flanged towing eye * Jost manual landing gear at the front * Two manual folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted at the front right side of the chassis * 15-pin power connector * LED rear lights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Tie-down hooks at the positions of the central locking as well as 2 pieces at the front wall * Chassis made of fine-grained steel * Steel pallet-style three-way tipper body with reinforced Strong side panels (continuous side walls at the top with internal tube reinforcement – without mid-stakes – foldable with panel spring lifter) * Rear stakes bolted * Combination steel double-wing rear doors, asymmetrically split – can be swung and locked at 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping operation, locking by zinc-coated rotary bolt closure at the rear and central locking, deactivation function for automatic tailgate during reverse tipping with open wing door * Each corner equipped with one 5 t lashing point, each side with four 3 t lashing rings recessed in the outer frame * 4 mm floor plate made of fine-grained steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load bearing capacity 10 t/pair) suitable for rubber-tired & tracked vehicles * Lockable storage compartment recessed under the loading platform at the rear in the chassis for ramps * Drawbar, underrun protection, rear stakes and rear folding supports hot-dip galvanized * Axles, springs, air tanks and landing gear painted in a shade of black * Tyres: 358/55 R 19.5 * Side panels painted to customer’s RAL color specification (except special or metallic paint) – may be changed up to approx. 6 weeks before completion * Errors and prior sale excepted * Available from week 29/2026 Fsdpfex Hm Rcsx Addogb * Sample images

Koşul: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Tire pressure monitoring with display capability in the truck via EBS signal - no truck-side installation required - * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem balancing unit * Drawbar height-adjustable by approx. 300 mm with 40 mm flanged towing eye * Jost mechanical landing gear at the front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on chassis * 15-pin power connector Fgodex Hm Rijpfx Addob * LED tail lights 12/24 V * Bolt-on underrun protection * Plastic quarter fenders * Net hooks at each lock location and 2 at the front wall * Chassis made of fine-grain steel * Steel pallet - three-way tipper body with reinforced strong side boards (continuous upper side walls with internal pipe reinforcement - without intermediate stanchions - foldable with board spring lifter * Screw-on rear stanchions * Combination steel swing door rear wall, 2-leaf, asymmetrically split, can be swung and locked up to 270° - not foldable - with additional pendulum frame for automatic tailgate opening when tipping, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic tailgate function when tipping backwards with doors open * In each corner, 1 x 5 t lashing point and each side, 4 x 3 t lashing rings recessed in the outer frame * 4 mm fine-grain steel floor plate * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair aluminum ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Rear lockable storage compartment recessed into the chassis below the loading area for ramp storage * Drawbar, underrun protection, rear stanchion, rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a black shade * Tires: 358/55 R 19.5 * Side walls painted in customer-chosen RAL color (no special or metallic paints) – color can be changed up to approx. 6 weeks prior to completion * Subject to errors and prior sale * Available immediately from KW 29/2026 * Sample images

Koşul: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2010, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Vehicle is being sold on behalf of a customer. Some wooden planks are damaged. 17 pairs of lashing rings. Loading height approx. 900 mm. -- Typographical errors, mistakes and alterations reserved, sample images -- More data at: !, More Details: ! Fgodpsyy I U Nofx Addsb

Koşul: ikinci el, boş ağırlık: 7.340 kg, azami yük ağırlığı: 22.660 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2012, yükleme alanı uzunluğu: 9.200 mm, süspansiyon: çelik, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Yükleme alanı uzunluğu yaklaşık 9.200 mm, yükseklik yaklaşık 900 mm, 16 adet bağlama halkası, araç sipariş üzerine satılmaktadır, baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler. Daha fazla bilgi için: !, More Details: ! Fodpfx Asyy I U Aoddogb

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/1993, Üretim yılı: 1993, Donanım: ABS, - EBS Fgsdpoxt Rw Refx Addsb Daha fazla bilgi için lütfen bizimle iletişime geçin.

Koşul: ikinci el, azami yük ağırlığı: 7.100 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2007, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 1.100 mm, toplam genişlik: 2.550 mm, Araç / Üst yapı: Tandem üç taraflı damper İlk tescil: 07/07 Toplam ağırlık: 10.000 kg Boş ağırlık: 2.900 kg Taşıma kapasitesi: 7.100 kg Toplam uzunluk: 6.900 mm Yükleme uzunluğu: 5.000 mm Genişlik: 2.550 mm / yaklaşık yükleme genişliği 2.450 mm Yükleme yüksekliği: yaklaşık 1.100 mm Diğer bilgiler - 40 km/s - 500 mm yan paneller - 500 mm galvanizli ön ek - Yük yüzeyinde 7 çift sabitleme halkası - Üst yapı dışında 4 çift sabitleme halkası Fedpsyz H Azsfx Addegb - Destek ayağı - Arka destek - Yan panel kaldırma yayı - Opsiyonel rampalar 1.280,00 €

Koşul: ikinci el, azami yük ağırlığı: 7.000 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/1999, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 1.100 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 10.000 kg Boş ağırlık: 2.000 kg Taşıma kapasitesi: 7.000 kg Toplam uzunluk: 6.900 mm Yükleme uzunluğu: 5.000 mm Genişlik: 2.550 mm / Yükleme genişliği yaklaşık 2.450 mm Yükseklik: yaklaşık 1.100 mm Ek bilgiler - 40 km/s - 500 mm yan kapaklar - 500 mm galvanizli ön panel uzatması Fodpfx Ajyz H A Ijddjgb - Yükleme alanında 8 çift sabitleme halkası - Kasa altında dışarıda 4 çift sabitleme halkası - BPW akslar - Destek ayağı - Yan kapak kaldırma yayı - Opsiyonel çıkarma rampaları: 1.280,00 €

Koşul: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height increases by +30 mm when lifted) * Last axle steered (axle steering lock for maneuvering can be engaged from the driver’s cab without truck-side installation or additionally via a switch on trailer). The lock must be disengaged before entering public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (requires truck-side installation), with speed-dependent activation via EBS control ----Suspension: * Air suspension, lifting and lowering system with RtR valve Fsdpfel Tihusx Addjgb ----Drawbar: Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring system, displayable in truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * Removable LED beacon at the rear ----General Attachments: * Mechanical warning sign package for 3 m total width * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, mounted left side * Front plastic mudguards and rear galvanized steel mudflaps ----Low Loader Deck: * Gooseneck turntable platform with 45° corners and 3 storage compartments with lockable folding lids (rear-opening) * Shortened lowbed platform by 500 mm to 6,280 mm including extended stepped contour, 500 mm forward * Rubber lining on folding frame, drive-on slope and load-bearing surface on the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing points per side (front & rear corners) * 5 x 10 t UVV lashing rings per side (pivoting, retractable, loadable in all directions) * 4 stake pockets per side, also providing 2 t lashing capability each * 1 x 16 t UVV lashing point on the rear traverse ----Widening: * Extendable and foldable extension arms for up to 3 m total width (deck board holder under the chassis, right side) ----Excavator Stick Recess: * Fully continuous, reinforced profile from last axle to rear cross member. Approx. L=2,350 x W=770 x D=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for truck hydraulic pump outputs over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Load area above turntable: 2,600 + 390 x 2,520 mm * Lowbed area: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Paintwork: * Chassis, turntable, drawbar, extension consoles, and loading ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Notes: * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: Immediately available*

Koşul: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring brake chambers * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm with axle lifted) * Last axle with trailing steering (lockable from cab for shunting without truck-side installation, additionally lockable via switch on the trailer). Lock must be deactivated before entering public roads. * Forced relief as well as forced lowering of lift axle for manoeuvring purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon at rear ----General Attachments: * Mechanical warning sign kit for 3 m overall width * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, on left side * Plastic fenders at front axle, galvanized sheet steel fender skirts at rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear) * Shortening of the low-loader platform by 500 mm to 6,280 mm including extended offset bending by 500 mm to the front * Rubber coating on folding frame, approach slope, and running surface of low loader platform * Bamboo timber between longitudinal beams in front of excavator stick rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings in the front corners * 2 x 13.4 t UVV lashing points front and rear on each side * 5 x 10 t UVV lashing rings on each side (pivoting, lowerable, and loadable from all directions) * 4 stake pockets per side, each with 2 t lashing option * 1 x 16 t UVV lashing point at rear cross member ----Widening: * Extendable and foldable widening arms for 3 m overall width (plank holder under the chassis on front right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on the side in the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and deployable pointed section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump performance in truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Deck Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope Fgedpfxoxptn Dj Addsb ----Paintwork: * Chassis, turntable, drawbar, widening consoles, access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: Available immediately*

Koşul: yeni, azami yük ağırlığı: 8.770 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, * Müller-Mitteltal ETÜ-TA-R 11.9 Low Loader Tandem Trailer / Ramps * BRAND NEW VEHICLE, no first registration * Available mid/end of May '26 in RAL 7016 Anthracite Inquiry no.: 30504 * Gross weight: 11.9 t, Payload: 8.77 t * Reinforced and certified bodywork according to EN 12642 XL incl. load securing certificate * 6.27m x 2.47m x 0.4m laser-welded steel drop sides, foldable with 2 spring balancers * Front wall bolted, made of smooth sheet (hot-dip galvanized) * Rear wall: (hot-dip galvanized) placed in front of the ramps with a storage bracket behind the front wall * Rear stakes bolted (hot-dip galvanized) * 50mm thick softwood floor * 4 UVV lashing rings LC 6300daN recessed front and rear in the cross member * 10 UVV lashing brackets LC 3000daN recessed in the perforated pattern in the outer frame * Ramps: one-piece with hot-dip galvanized grating, anti-slip design * Preparation in front of the front wall for retrofitting container locks * Plastic toolbox in front of the front wall Fgsdpfx Asyxbdboddob * Chassis and drawbar (hot-dip galvanized) * 235/75 R17.5 (4 wheels), parabolic springs * BPW axles with tire pressure monitoring * EBS 24 Volt * Height-adjustable drawbar (hot-dip galvanized) with 40 mm towing eye * 2 LED reversing spotlights at the rear of the trailer * LED lighting system for 12+24 Volt * Side marker lights with indicator activation * 1 removable LED rotating beacon (warning light) incl. bracket and installation ---- * Trade-in possible * Financing through our partners, with or without down payment or balloon payment, various terms available. Request an offer! ---- * Example hire purchase with our partner FM LeasingPartner: €475/month net for 60 months, no down payment, zero balloon. Other terms with/without down payment or final payment available. Request an offer! We are an official MüllerMitteltal dealer! ---- * Our business hours: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside of office hours available by appointment * We speak German, English, Russian, Polish, and French.

Koşul: yeni, azami yük ağırlığı: 11.050 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low Loader Three-way Tipper Trailer with Ramps * NEW VEHICLE * Available mid-May 2026 in RAL 9016 traffic white * Leasing, financing, and trade-in of your old trailer possible ---- * Reference number for inquiries: 30505 ---- * Remote diagnostics with display option in truck via EBS signal * Side marker lights with indicator control * Gross weight: 14,400 kg, payload: 11,050 kg Fodpfxoyvxg Is Addegb * EBS 2S/2M * Galvanized floor 5m x 2.42m x 0.5m, laser-welded drop sides, swinging, folding, and removable, prepared for later retrofit of additional side panels * Lockable compartment under the tipping platform for loading ramps * Incl. 1 pair aluminum loading ramps 8t per pair, 3.57m * Chassis hot-dip galvanized, front wall hot-dip galvanized * 4 UVV lashing rings LC 5000daN front and rear + 8 lashing eyes LC 3000daN flush mounted and foldable in tipper floor (centered) * Hardwood excavator bucket rest * 2-step access in front of the front wall (hot-dip galvanized) * Continuously height-adjustable drawbar, hot-dip galvanized, 40mm towing eye * Wide tires 385/55R 19.5 (4x), parabolic springs * Net hooks, rear stanchions screwed on, hot-dip galvanized * Extension cables for the rear drop side * Plastic toolbox on right side of chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at rear of trailer ---- * Hire purchase price: * e.g. €549 for 60 months, no down payment, no residual value. An offer from our financing partner "FM LeasingPartner". Other terms with/without residual value or down payment available * Request our offer! * We are Müller-Mitteltal dealers * Free delivery possible for timely orders! ----Our business hours: Monday to Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside business hours, appointments can be arranged. We speak German, English, Polish, and French. WhatsApp

Koşul: ikinci el, azami yük ağırlığı: 30.700 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 11/2002, Donanım: ABS, * MüllerMitteltal alçak şasi 4 dingilli T40 * 2X yönlendirilebilir döner tabla aksı * Alman römorku * Direk Fgedpfsyuri Eox Addjb * Hidrolik olarak yana kaydırılabilen rampalar (sol-sağ) * Katlanabilir, bölünmüş rampalar * Genişletilebilir * ABS * BPW akslar * 40 ton * Boş ağırlık: 9.300 kg * Dingil başına yük kapasitesi: 10 ton * Tam çalışır durumda * Lastikler iyi durumda

Koşul: yeni, azami yük ağırlığı: 13.490 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, TRA-Kombi 18.0: 3 in 1 = for roll-off containers, skip containers, and use as low loader ----Braking system: Fgsdpfx Ajl Tld Ieddeb * EBS-E (electronic braking system) * Emergency release device for spring-type cylinders * Drum brakes ----Axles: * 2 × 10.5 t axles ----Suspension: * Air suspension with manual lowering at rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment mechanism ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System), indication in the truck via EBS signal (without truck-side installation) * LED tail lights 12/24 V * 15-pin power connector ----General attachments: * Tool box made of powder-coated sheet steel * Spare wheel carrier in basket design on the right side * Closed side underrun protection * Plastic quarter mudguards with spray protection * Rear plastic impact buffers * Folding A-plate at rear ----Loading area: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel floor with roller recesses in the bogie area * Transport of roll-off containers with container length from 5,500 mm to 7,000 mm possible * Pneumatic 4-way clamp locking and mechanical plug-in stop angles at the front of the guide rails * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 relocatable skip stops for lateral centring, front 4 skip stops are plugged in with tiltable stops * Weld bead as anti-slip coating in the drive-on ramp area * Mechanical drop-down supports at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tie-down elements for positive and non-positive securing of skips; 4 cloverleaf-style lashing cleats on each side * 1 pair of 13.4 t UVV lashing rings at the front * Each side fitted with 4 × 8 t lashing loops recessed in the outer frame ----Ramps: * Aluminium approach ramps (10.6 t / pair), 2,800 × 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on sides and rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Notes: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * --Perm. total weight of 20,000 kg technically possible-- * New vehicle without initial registration with manufacturer’s warranty * Errors and intermediate sale excepted ----Delivery time: * Immediately available from Egstorf

Koşul: yeni, azami yük ağırlığı: 13.490 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, TRA-Kombi 18.0: 3 in 1 – for roll-off containers, skip containers, and as a low-loader ----Braking system: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 t axles Fgjdpfol Tnwzsx Addeb ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm length, with 40 mm towing eye and height adjustment mechanism ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System), can be displayed in the truck via EBS signal (no need for truck-side installation) * LED tail lights 12 / 24 V * 15-pin power connector ----General equipment: * Tool box made of powder-coated sheet steel * Spare wheel holder in cage design on right side * Closed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Foldable A-sign at the rear ----Loading platform: * Hot-dip galvanized main frame with raised outer frame to guide roll containers * Steel floor with recesses for rollers in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point locking clamps and mechanically insertable stop angles at the front of the track * Can transport up to 2 skip containers with a maximum volume of 10 m³ * Includes 8 repositionable skip stops for lateral centering, front 4 are pinned with pivoting stop * Weld bead as anti-slip surface in the inclined ramp area * Mechanical drop-down supports at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips, 4 lashing cleats in cloverleaf design on each side * 1 pair of 13.4 t UVV lashing rings at the front * 4 x 8 t lashing eyes per side recessed into the outer frame ----Ramps: * Aluminum drive-on ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Painting: * Reflective contour tape on sides & rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Info: * Load securing certificate according to DIN 30722-1 * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * --Permissible total weight of 20,000 kg technically possible-- * New vehicle without initial registration, comes with manufacturer’s warranty * Errors and subject to prior sale ----Delivery time: * Available immediately from Egstorf

Koşul: yeni, azami yük ağırlığı: 13.490 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, TRA-Kombi 18.0: * 3-in-1 – suitable for hooklift, skip containers, and as a low-loader ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5-ton axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment mechanism ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System), displayable in truck via EBS signal (no truck-side installation required) * LED tail lights 12/24 V * 15-pin electrical connector ----General Attachments: Fgsdpfx Adjwb Rakodsb * Tool box made of powder-coated steel plate * Spare wheel carrier in basket design on right-hand side * Enclosed side underrun protection * Quarter mudguards with splash guards made of plastic * Plastic rear impact protection buffers * Folding A-board at rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame to guide roll containers * Steel plate floor with roller recesses in the bogie area * Suitable for hook lift container transport, container lengths from 5,500 – 7,000 mm * Pneumatic four-point clamping lock and mechanically inserted front stops in the guide rails * Transport of up to 2 skip containers with max. 10 m³ possible * Eight repositionable skip stops for side centering. The front four can be inserted and are pivotable. * Weld seam as anti-slip coating in the inclined ramp area * Mechanical rear drop-down supports ----Load Securing: * 3 pairs of 10-ton UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of skips; each side with 4 cloverleaf lashing brackets * 1 pair of 13.4-ton UVV lashing rings facing towards the front * Four 8-ton lashing eyes per side integrated into the outer frame ----Ramps: * Aluminium loading ramps (10.6 ton/pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Painting: * Reflective contour tape, sides and rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible gross weight of 20,000 kg technically possible * New vehicle, unregistered, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egstorf

Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low-loader | Flatbed | Trailer Available immediately | Request number: 27678 | Delivery to your address possible * We are happy to provide you with an individual offer Technical Specifications: * Gross weight: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27 m x 2.47 m flatbed with galvanized 400 mm front wall * Excavator bucket rest made of hardwood, bolted to front wall * Platform height unladen 930 mm / laden 870 mm * Single-piece ramps with hot-dip galvanized anti-slip grating, can be pushed together to approx. 20 mm, secured with holding rods and diagonal supports * Ramp lifters with vertically mounted, adjustable springs for easy single-person operation * 4 drop-forged lashing eyes (UVV, LC 6300 daN) * Perforated outer frame (45°-bent with hole pattern for lashing equipment, lashing capacity per point LC 2000 daN at a minimum spacing of 480 mm). Installation of drop-forged lashing eyes LC 3000 daN at approx. 600 mm spacing possible. Closely spaced transverse profiling, high-profiled front and rear closure, rear access ramp, hot-dip galvanized. * 10 recessed UVV lashing eyes LC 3000 daN in pre-existing hole pattern in outer frame, additional options * Further lashing options via holes (Ø 50 mm, LC 1200 daN) in front and rear beam * Toolbox positioned in front of the bulkhead * Side marker lights with indicator function * Softwood floor, 50 mm thick. Chassis hot-dip galvanized * 2 recessed container locks in front cross member * Height-adjustable support jack at the front, foldable supports at the rear * Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable; 50 mm towing eye available on request * 1 removable LED marker light at rear ---- Leasing, hire purchase, financing, and trade-in available E.g. 515 euros for 60 months term without down payment or final residual value ---- Our Opening Hours Fgedpfsyadz Rex Addeb Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside opening hours, we are available by appointment We speak German, English, Polish, and French Leasing, financing, and trade-in possible

Koşul: ikinci el, boş ağırlık: 3.650 kg, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2011, bir sonraki muayene (TÜV): 08/2024, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: hava, lastik boyutu: 285/70R19.5, renk: beyaz, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, tandem, air suspension, ABS (anti-lock braking system), tailgate, lashing rings, underrun protection, front support, rear support, swing tailgates, height-adjustable drawbar. Body: Tandem 3-way tipper trailer with aluminum drop sides, 2x Gigant axles, drum brakes! Fgodsth Uavepfx Addsb Loading ramps available at an extra charge of €990.00 net! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Koşul: ikinci el, ilk tescil: 11/2006, Üretim yılı: 2006, MÜLLER - MITTELTAL T4 Kompakt Döner Tabla - Alçak Şasi Dorsesi, havalı süspansiyon ve teker çukuru ile - 4 x havalı süspansiyonlu GIGANT aks - havalı süspansiyonlu - 4 x teker çukuru - mekanik rampa - arkada 2 destek, katlanabilir - uzatılabilir uyarı levhaları - ABS - MICHELIN lastikler: 235/75 R 17.5 - ağır model: 40.000 kg azami yüklü ağırlık - boş ağırlık: 8.400 kg - toplam uzunluk: 11.750 mm - 50 mm çeki halkası Fgedpfx Aewmpbdoddeb Özellikle kalk freze makineleri taşımak için uygundur! - Alman römorku - Muayene / teknik kontrol istek üzerine ve ek ücretle mümkün! Hata ve ön satış hakkı saklıdır!

Koşul: ikinci el, boş ağırlık: 5.100 kg, azami yük ağırlığı: 12.900 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 12/1998, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 1 mm, toplam uzunluk: 2.550 mm, toplam genişlik: 1.600 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, dingil mesafesi: 5.400 mm, renk: turuncu, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), lashing rings, container locks, underrun protection, pneumatically adjustable drawbar, side aluminium side impact protection, twin tyres, storage box, removable side walls. Wheelbase: 5,400 mm. Body: Trailer for roll-off containers in lengths 6 m to 6.75 m, SAF axles type SKRZ 11030, pneumatic hook low-tension device, 2 x mounting pockets for plug-in locking hooks, 4 x pockets for plug-in container centring and container stops. The trailer can also be used as a flatbed! Aluminium side walls with a height of 600 mm are included with the trailer! Fgedpfx Aji Rpxweddob Loading ramps available at an additional net price of €900. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to modifications, prior sale and errors!

Koşul: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * Drawbar with 300 mm adjustable height * 40 mm flanged towing eye ----General Attachments: * Jost mechanical landing gear at front * Externally mounted, hot-dip galvanized folding supports at rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted externally on the front wall ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin electrical connector * LED tail lights ----Cargo Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted smooth sheet steel front wall * Drop sides made of trapezoidal steel sheet, foldable, with drop-side spring assist * Hot-dip galvanized, bolted rear stanchions ----Load Securing: Fgsdpfx Adel Thy Rodeb * Perforated external frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Option to install 3 t swing lashing rings every 600 mm (5 lashing rings mounted on each side) * One 6.3 t lashing ring in each of the four corners front and rear * Various holes in the front and rear crossmembers for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear access, storage compartment below loading platform integrated into the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall * Dropside colour in RAL 9010 pure white * Painting of sidewalls in an RAL colour at additional cost possible ----Information: * New vehicle, unregistered * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf