Kullanılmış Müller-Mitteltal Tandem-Tieflader Anhänger Ets-Ta-B 11,9 satın al (36.523)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4
----Brakes:
* EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
Klodepk Dv Rspfx Ad Iou
----Suspension:
* Air suspension
----Drawbar / Flanged towing eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flanged towing eye
----Lighting / Electrics:
* RDÜ (Tire Pressure Monitoring System)
* LED taillights 12/24 V
* 15-pin electric connector
----General Attachments:
* Jost landing gear at front
* External hot-dip galvanized folding support legs at rear
* Plastic toolbox, front right outside on front wall
* Side underrun protection
* Plastic quarter mudguards
----Low-bed loading area:
* 50 mm softwood floor
* Preparation in front of bulkhead for later installation of container locks
* Bolt-on smooth steel front wall
* Side walls made of trapezoidal steel sheet, foldable, with drop side lifting device
* Steel rear wall, insertable between ramp mounts; when not in use, stored inside in front of bulkhead
* Bolt-on rear stanchions
* Rear approach angle approx. 860 mm
----Load securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Provision for fitting 3 t lashing rings every 600 mm
* In each corner at front and rear: 1 x 6.3 t lashing ring
* Various drilled holes for 1.2 t lashing points in front and rear crossmembers
----Ramps:
* One-piece mechanical grid ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (collapsible to 20 mm width)
----Paintwork:
* Hot-dip galvanized chassis, drawbar, front wall, rear wall, tailgate, and ramps
* Drop side color in RAL 9010 pure white
* Painting of side walls in a RAL color of your choice available at extra cost
----Info:
* --Reinforced and certified body according to EN 12642 XL, including load securing certificate--
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL18t. Kombi, Abroller Absetzer Tieflader, Parabel
Ara
Durum: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 18.0:
* 3 in 1 = for roll-off containers, skip containers, and as a low-loader
----Brakes:
* TPMS (Tire Pressure Monitoring System)
* EBS-E (Electronic Braking System)
* Emergency release device for spring brake cylinders
----Axles:
* 2 x 12 t Gigant axles
----Suspension:
* Parabolic springs
----Drawbar:
* Pneumatically lowerable drawbar, 2,100 mm long
* 40 mm towing eye and adjustable height mechanism
----Electrics / Lighting:
* LED tail lights
* 15-pin electrical connector
* TPMS (Tire Pressure Monitoring), display option in the truck via EBS signal (no truck-side installation required)
----General Attachments:
* Tool box made of powder-coated sheet steel, right side
* Side underrun protection
* Plastic quarter mudguards with spray protection
* Storage box for container nets made of galvanized sheet metal, approx. 960 x 300 x 400 / 450 mm, right side
* Rear plastic impact buffer
* Mechanical drop-down supports at the rear
----Loading Platform:
* Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll containers
* Steel floor with wheel recesses in the bogie area
* For roll-off container transport, container length from 5,500 to 7,000 mm possible
* Pneumatic 4-point locking clamps and mechanically insertable front stops in the rail, cargo securing certificate according to DIN 30722-1
* Transport of up to 2 skip containers with a max. volume of 10 m³ possible
* Includes 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops inserted with pivoted stop
* Weld bead as anti-slip coating in the run-up ramp area
----Load Securing:
* 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning equipment for positive and frictional securing of skips
* 4 lashing cleats each in cloverleaf design (side)
* 1 pair of 13.4 t UVV lashing rings at the front
----Ramps:
* 1 pair of aluminum approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear)
----Information:
Klodpfx Ael Thv Rod Isu
* Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700
* Permissible total weight of 20,000 kg technically possible
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. CW 44 / 2026
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL18t. Kombi, Abroller Absetzer Tieflader, Parabel
Ara
Durum: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 18.0:
* 3-in-1 functionality: suitable for roll-off containers, skip containers, and as a low loader
---- Brakes:
* TPMS (Tire Pressure Monitoring System)
* EBS-E (Electronic Braking System)
* Emergency release for spring-loaded cylinders
---- Axles:
* 2 x 12 t Gigant axles
---- Suspension:
* Parabolic springs
---- Drawbar:
* Pneumatically lowerable drawbar, 2,100 mm long
* 40 mm towing eye and height adjustment mechanism
---- Electrics / Lighting:
* LED tail lights
* 15-pin power connector
* TPMS display capability in the truck via EBS signal (no truck-side installation required)
---- General Attachments:
* Toolbox made of powder-coated steel sheet, mounted on the right side
* Side underrun protection
* Quarter plastic mudguards with spray protection
* Storage box for container nets, made of galvanized sheet metal, approx. 960 x 300 x 400 / 450 mm, right side
* Rear plastic bump stops
* Mechanical drop-down supports at rear
--- Loading Platform:
* Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide roll-off containers
* Steel floor plate with roller recesses in the bogie area
* For roll-off container transport, possible container lengths from 5,500 to 7,000 mm
* Pneumatic 4-point clamp locking as well as mechanical plug-in stop angles at the front in the track, load securing certificate according to DIN 30722-1
* Transport of up to 2 skip containers with a maximum volume of 10 m³ possible
* Including 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops often with swiveling stops
* Welded seam as anti-slip coating in the ramp area
---- Load Securing:
* 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning elements for positive and non-positive securing of skips
* 4 lashing brackets in cloverleaf design on each side
* 1 pair of 13.4 t UVV lashing rings at the front
---- Ramps:
* 1 pair of aluminum approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at rear)
---- Information:
* Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700
* Permissible total weight of up to 20,000 kg technically possible
* New vehicle with manufacturer's warranty
Klsdpfxol Thwco Ad Ieu
* Subject to errors and intermediate sale
---- Delivery Time:
* Available from approx. calendar week 44 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
Ara
Durum: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA 18.0:
* 2-in-1 = for roll-off containers and as a low-bed trailer
----Braking system:
* EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 10 t axles
----Suspension:
* Air suspension with lifting and lowering system as well as RTR valve
----Drawbar:
* Drawbar 2,000 mm long with 40 mm towing eye and height adjustment device
----Electrics / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required)
* LED rear lights 12 / 24 V
* 15-pin electrical connector
----General attachments:
* Toolbox made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm
* Storage box for container nets made of galvanized sheet, 960 x 300 x 450/400 mm
* Reflective contour marking tape on sides and rear
* Side underrun protection
* Plastic quarter mudguards with spray suppression
Ksdpfel Tq Nmjx Ad Ielu
* Plastic rear bumper buffer
* Folding A-sign at rear
----Loading platform:
* Main frame with raised outer rails for guiding roll-off containers
* Steel floor plate with recesses for rollers in the bogie area
* Container length possible from 5,500 - 7,000 mm
* Pneumatic 4-way clamp locking and mechanical removable stop wedges at the front of the running track, cargo securing certificate according to DIN 30722-1
* Weld bead as anti-slip surface in the inclined running track area
* Mechanical drop-down rear supports
----Load securing:
* 1 pair 10 t UVV lashing rings at the front bulkhead support
* 3 pairs 10 t UVV lashing rings at the lateral outer frame
* On each side, 4 x 2 t lashing eyes in cloverleaf design
* 4 x 8 t recessed lashing brackets in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps (10.6 t / pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessed from rear)
----Paintwork:
* Chassis, bogie, locking parts, and rear drop-down supports hot-dip galvanized
* But the drawbar, axles, and air tanks painted in a black tone
----Information:
* New vehicle, never registered, with full manufacturer's warranty
* Subject to errors and prior sale
* Reference images
----Delivery time:
* Available approx. from CW 43 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL4-achs Anh. Tieflader, Klapprampe, Gummibelag
Ara
Durum: yeni, azami yük ağırlığı: 31.900 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0
----Braking system:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 4 x 11 ton Gigant axles
----Suspension:
* Air suspension with lifting and lowering system and RtR valve
----Drawbar:
* Straight drawbar with 50 mm towing eye and continuously adjustable height setting
----Electrics / Lighting:
* Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required
* SmartBoard as infotool with pressure sensors for axle load indication per axle group
* 15-pin electrical connector
* LED rear lights
Kedpfeylfvmjx Ad Ijlu
* LED beacon (removable) at the rear
----General attachments:
* Warning sign packages front & rear
* 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, mounted right side
* Front closed plastic single mudguards
* Rear straight steel mud aprons each with spray protection (spray mist suppression)
* Side underrun protection
----Low-loader platform:
* Turntable platform extended by 520 mm with 45° corners and 3 recessed storage compartments including covers, lockable
* Floor on turntable platform made of 50 mm and on low-loading platform of 60 mm softwood
* 20 mm rubber overlay instead of wooden floor in trackway area, with a low-bed length of 6,780 mm including approach ramp
* Rubber overlay on the approach ramp left and right, approx. 860 mm long
* Each side with 4 pocket stakes (no stakes included) with simultaneous 2-ton lashing capacity each
----Chassis:
* Chassis made of high-strength fine grain steel
----Load securing (Lasi package):
Turntable platform:
* 2 pairs of 13.4 ton lashing eyes in the outer frame of the turntable platform
Low-bed:
* Each side with 4 pairs of 10 ton drop-down lashing rings on the outer frame, loadable in all directions
* Rear sides each with 2 pairs of 13.4 ton swing-out lashing rings
----Ramps:
* Rubber overlay on folding loading ramps
* Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm
* Hydraulic lateral ramp shift & load holding valves
----Rear support:
* Hydraulic rear support
----Wideners:
* 8 pairs of galvanized folding outriggers for 3 meters overall width (not included on the rear slope)
* Widening planks stored in a compartment left side
----Digger stick recess:
* Digger stick recess over the rear axle up to the end of approach ramp, approx. L=2,100 mm x W=740 x H=190 mm
* 2 pairs of 6.4 ton lashing rings in the digger stick recess on each side
----Hydraulics:
* Hydraulic flow divider in the trailer (with truck hydraulic pump output over 40 – max. 120 l/min)
----Loading dimensions:
* Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm approach ramp)
* Loading area above turntable: approx. 2,990 x 2,520 mm
----Loading height:
* Loaded approx. 890 mm, +/- 20 mm
----Paintwork:
* Reflective contour tape, sides and rear
* Chassis, turntable, ramps, and folding outriggers hot-dip galvanized
* Axles, drawbar, air tanks and turntable painted in black tone
----Info:
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Sample images may include special equipment
----Delivery time:
* Vehicle is expected to be available from week 23/2026
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Ara
Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum mounts
----Braking System:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with lift and lowering system
----Drawbar:
* Drawbar, 1,800 mm long, with 40 mm towing eye
----Electrical / Lighting:
* Tyre pressure monitoring with display option in the truck dashboard via EBS signal (no installation required on truck side)
* 15-pin electrical connector
Kjdpfex Nli Nox Ad Ielu
* 2 additional LED reversing lights (activated by reverse gear)
* LED lighting
----General Fittings:
* Aluminium air tank
* Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm
* Side underrun protection
* Plastic quarter mudguards
* Rear underrun protection
----Platform:
* Zurr-fix outer frame, 45° angled with perforation pattern for load securing devices, lashing capacity per tie-down point 2,000 kg at a spacing of 480 mm
* Option to install 3,000 kg drop-in lashing brackets at approx. 600 mm intervals – delivery includes 12 pieces of 3,000 kg lashing brackets per side
* 5 pockets per side for pipe stakes, 100 x 50 mm, integrated in the outer frame (stakes not included in delivery)
* 30 mm phenolic plywood floor
----Cable Drum Mounts:
* 3 galvanized cable drum mounts, secured by container lockings with side forklift pockets, center-to-center 800 mm (pocket width 185 mm)
* Max. drum diameter 2,600 mm and drum width max. 1,650 mm
* Clear width between support arms approx. 1,775 mm, with cross connection
* Max. drum weight per mount: 6,000 kg
* Without drive and drum brake
* Support arm with tension latch for drum shaft securing
* Steel drum shaft, 76 mm diameter with centering and rotatable ends
* 2 spacer rings
* 2 polyamide centering cones
* 4 pieces of 3.2 t lashing eyes on support arms for customer’s own securing of the drum against rotation and unspooling
----Loading Height:
* Loaded approx. 1,040 mm
----Paintwork:
* Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized
* Axles painted in a black tone
----Info:
* Technical uprating to 30 t GVW possible
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from week 51 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL5 achs Tieflader, Nachlauflenkachse, MA liftbar
Ara
Durum: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0:
----Braking System:
* Wabco EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 5 x 11 t Gigant axles
* 3rd axle liftable (ride height increases by +30 mm when lifted)
* Last axle steered (axle steering lock for maneuvering can be engaged from the driver’s cab without truck-side installation or additionally via a switch on trailer). The lock must be disengaged before entering public roads.
* Forced lifting and lowering of the lift axle for maneuvering purposes (requires truck-side installation), with speed-dependent activation via EBS control
----Suspension:
* Air suspension, lifting and lowering system with RtR valve
----Drawbar:
Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment
----Electrics / Lighting:
* Smartboard as info tool with pressure sensors for total axle load display per axle group
* Tire pressure monitoring system, displayable in truck via EBS signal (without truck-side installation)
* LED lighting system 12/24 V
* Removable LED beacon at the rear
----General Attachments:
* Mechanical warning sign package for 3 m total width
* Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, mounted left side
* Front plastic mudguards and rear galvanized steel mudflaps
----Low Loader Deck:
* Gooseneck turntable platform with 45° corners and 3 storage compartments with lockable folding lids (rear-opening)
* Shortened lowbed platform by 500 mm to 6,280 mm including extended stepped contour, 500 mm forward
* Rubber lining on folding frame, drive-on slope and load-bearing surface on the low loader platform
* Bamboo wood between the longitudinal beams in front of the excavator stick recess
----Load Securing (LaSi package):
* 2 x 6.4 t lashing rings at the front corners
* 2 x 13.4 t UVV lashing points per side (front & rear corners)
* 5 x 10 t UVV lashing rings per side (pivoting, retractable, loadable in all directions)
* 4 stake pockets per side, also providing 2 t lashing capability each
* 1 x 16 t UVV lashing point on the rear traverse
Kledpfel Tihusx Ad Ieu
----Widening:
* Extendable and foldable extension arms for up to 3 m total width (deck board holder under the chassis, right side)
----Excavator Stick Recess:
* Fully continuous, reinforced profile from last axle to rear cross member. Approx. L=2,350 x W=770 x D=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides
----Ramps:
* Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift
----Rear Support:
* Hydraulic rear support
----Hydraulics:
* Hydraulic flow divider (for truck hydraulic pump outputs over 40 l/min up to max. 140 l/min)
----Loading Height:
* Loaded: 890 mm +/- 20 mm via air suspension
----Platform Dimensions:
* Load area above turntable: 2,600 + 390 x 2,520 mm
* Lowbed area: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope
----Paintwork:
* Chassis, turntable, drawbar, extension consoles, and loading ramps hot-dip galvanized
* Tow bar, axles, hydraulic axle supports, and air tanks painted in black
----Notes:
* New vehicle with manufacturer’s warranty
* Subject to prior sale and errors
----Delivery Time:
Immediately available*
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTAL5 achs Tieflader, Nachlauflenkachse, MA liftbar
Ara
Durum: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0:
----Braking System:
* Wabco EBS (Electronic Braking System)
* Emergency release device for spring brake chambers
* Drum brakes
----Axles:
* 5 x 11 t Gigant axles
* 3rd axle liftable (ride height +30 mm with axle lifted)
* Last axle with trailing steering (lockable from cab for shunting without truck-side installation, additionally lockable via switch on the trailer). Lock must be deactivated before entering public roads.
* Forced relief as well as forced lowering of lift axle for manoeuvring purposes (truck-side installation required), with speed-dependent control via EBS electronics
----Suspension:
* Air suspension, lifting and lowering system with RtR valve
----Drawbar:
Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment
----Electrics / Lighting:
* Smartboard as an infotool with pressure sensors for total axle load display per axle group
* Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required)
* LED lighting system 12/24 V
* Removable LED beacon at rear
----General Attachments:
* Mechanical warning sign kit for 3 m overall width
* Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, on left side
* Plastic fenders at front axle, galvanized sheet steel fender skirts at rear axle
----Low Loader Platform:
* Front section of turntable platform with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear)
* Shortening of the low-loader platform by 500 mm to 6,280 mm including extended offset bending by 500 mm to the front
* Rubber coating on folding frame, approach slope, and running surface of low loader platform
* Bamboo timber between longitudinal beams in front of excavator stick rest
----Load Securing (LaSi Package):
* 2 x 6.4 t lashing rings in the front corners
* 2 x 13.4 t UVV lashing points front and rear on each side
* 5 x 10 t UVV lashing rings on each side (pivoting, lowerable, and loadable from all directions)
* 4 stake pockets per side, each with 2 t lashing option
* 1 x 16 t UVV lashing point at rear cross member
----Widening:
* Extendable and foldable widening arms for 3 m overall width (plank holder under the chassis on front right side)
----Excavator Stick Rest:
* Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on the side in the excavator stick rest
----Ramps:
* Hydraulic folding ramp with dual-line hydraulics and deployable pointed section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift
----Rear Support:
* Hydraulic rear support
----Hydraulics:
Klsdpfxsxptn Do Ad Iju
* Hydraulic flow divider (for hydraulic pump performance in truck over 40 l/min up to max. 140 l/min)
----Loading Height:
* Loaded: 890 mm +/- 20 mm via air suspension
----Deck Dimensions:
* Platform over turntable: 2,600 + 390 x 2,520 mm
* Low-bed platform: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope
----Paintwork:
* Chassis, turntable, drawbar, widening consoles, access ramps hot-dip galvanized
* Drawbar, axles, hydraulic axle supports and air tanks painted in black
----Information:
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
----Delivery Time:
Available immediately*
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
Ara
Durum: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA 18.0:
* 2-in-1: For hook lift containers and as a low-loader trailer
----Braking System:
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10 ton axles
----Suspension:
* Air suspension with lifting/lowering system and RTR valve
----Drawbar:
Kledpfx Asl Tpc Aod Iou
* Drawbar, 2,000 mm long, with 40 mm towing eye and height adjustment
----Electrics / Lighting:
* Tyre pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required
* LED rear lights, 12 / 24 V
* 15-pin power plug
----General Attachments:
* Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm
* Storage box for container net, made of galvanized sheet metal, 960 x 300 x 450/400 mm
* Reflective contour tape on sides & rear
* Side underrun protection
* Plastic quarter mudguards with spray protection
* Plastic rear impact buffers
* Folding A-board at the rear
----Loading Platform:
* Main frame with raised outer frame for guiding roll-off containers
* Steel floor plate with roller recesses in the bogie area
* Container lengths from 5,500 – 7,000 mm possible
* Pneumatic 4-way clamp locking as well as mechanically insertable bracket stops front in the running area, load securing certificate according to DIN 30722-1
* Weld seam as non-slip coating in the ramp area
* Mechanical falling supports at rear
----Load Securing:
* 1 pair 10 t UVV lashing rings at the front wall carrier
* 3 pairs of 10 t UVV lashing rings on the sides in the outer frame
* 4 x 2 t cloverleaf-type lashing eyes per side
* 4 x 8 t lashing brackets set into the outer frame
----Ramps:
* 1 pair of aluminium loading ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear)
----Paintwork:
* Chassis, bogie, locking parts, and rear supports hot-dip galvanized
* Drawbar, axles, and air tanks painted in a black tone
----Information:
* New vehicle, never registered, with full manufacturer’s warranty
* Subject to errors and prior sale
* Sample images
----Delivery Time:
* Available from approx. week 43 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to., verst. Strongwände, Kombi- Heckklappe
Ara
Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9
----Braking System:
* Wabco EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Towing Eye:
* Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required
Kodsxf Skpepfx Ad Islu
* 15-pin power connector
* LED lighting system 12 / 24 V
* 2 LED reversing lights at the rear, activated via reverse gear
----General Attachments:
* Mechanical BPW landing gear at the front
* 2 mechanical foldable supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis
* Bolt-on underrun protection
* Plastic quarter mudguards
* Two-step access in front of the bulkhead on the left (direction of travel)
----Chassis:
* Chassis made from fine-grained steel
----Tipping Body:
* Net hooks located at the central locking bearings and 2 on the bulkhead
* Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards
* Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist
* Rear stanchions bolted
* Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping
* Locking via galvanized rotating rod lock at the rear and central locking
* Deactivation function for automatic tailgate on rear tipping with open wing door
* Rear mounting rail for loading ramps
----Load Securing:
* Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side
* 4 mm floor plate made of S 420 MC 4 fine-grained steel
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable compartment under the loading area, built into the chassis from the rear
----Paintwork:
* Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised
* Sidewalls and tailgate painted RAL 3003 ruby red
* Axles, springs, air tanks, and landing gear painted in black
----Info:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTAL4-achs Anh. Tieflader, Klapprampe, Gummibelag
Ara
Durum: yeni, azami yük ağırlığı: 31.900 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0
----Braking system:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 4 x 11 ton Gigant axles
Klsdpfx Aeylfvged Isu
----Suspension:
* Air suspension with lifting and lowering system and RtR valve
----Drawbar:
* Straight drawbar with 50 mm towing eye and continuously adjustable height setting
----Electrics / Lighting:
* Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required
* SmartBoard as infotool with pressure sensors for axle load indication per axle group
* 15-pin electrical connector
* LED rear lights
* LED beacon (removable) at the rear
----General attachments:
* Warning sign packages front & rear
* 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, mounted right side
* Front closed plastic single mudguards
* Rear straight steel mud aprons each with spray protection (spray mist suppression)
* Side underrun protection
----Low-loader platform:
* Turntable platform extended by 520 mm with 45° corners and 3 recessed storage compartments including covers, lockable
* Floor on turntable platform made of 50 mm and on low-loading platform of 60 mm softwood
* 20 mm rubber overlay instead of wooden floor in trackway area, with a low-bed length of 6,780 mm including approach ramp
* Rubber overlay on the approach ramp left and right, approx. 860 mm long
* Each side with 4 pocket stakes (no stakes included) with simultaneous 2-ton lashing capacity each
----Chassis:
* Chassis made of high-strength fine grain steel
----Load securing (Lasi package):
Turntable platform:
* 2 pairs of 13.4 ton lashing eyes in the outer frame of the turntable platform
Low-bed:
* Each side with 4 pairs of 10 ton drop-down lashing rings on the outer frame, loadable in all directions
* Rear sides each with 2 pairs of 13.4 ton swing-out lashing rings
----Ramps:
* Rubber overlay on folding loading ramps
* Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm
* Hydraulic lateral ramp shift & load holding valves
----Rear support:
* Hydraulic rear support
----Wideners:
* 8 pairs of galvanized folding outriggers for 3 meters overall width (not included on the rear slope)
* Widening planks stored in a compartment left side
----Digger stick recess:
* Digger stick recess over the rear axle up to the end of approach ramp, approx. L=2,100 mm x W=740 x H=190 mm
* 2 pairs of 6.4 ton lashing rings in the digger stick recess on each side
----Hydraulics:
* Hydraulic flow divider in the trailer (with truck hydraulic pump output over 40 – max. 120 l/min)
----Loading dimensions:
* Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm approach ramp)
* Loading area above turntable: approx. 2,990 x 2,520 mm
----Loading height:
* Loaded approx. 890 mm, +/- 20 mm
----Paintwork:
* Reflective contour tape, sides and rear
* Chassis, turntable, ramps, and folding outriggers hot-dip galvanized
* Axles, drawbar, air tanks and turntable painted in black tone
----Info:
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Sample images may include special equipment
----Delivery time:
* Vehicle is expected to be available from week 23/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Ara
Durum: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
Ksdpfx Asrwc R Ajd Islu
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange eye:
* Height-adjustable drawbar by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
----Electrics / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required)
* 15-pin electrical connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
----General fittings:
* Support winch at the front
* External folding supports at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm mounted externally to the right front bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood floor
* Fixture in front of bulkhead for subsequent installation of container locks
* 400 mm bolt-on smooth steel front bulkhead
* Bolt-on rear stanchions
* Drop sides with spring assist
----Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each of the front and rear corners
* Various holes in front and rear crossmember for 1.2 t lashing option
* Profifix lashing rail installed centrally in longitudinal axis for lashing up to LC 3000 daN
----Ramps:
* One-piece hydraulic grating ramps approx. 2,750 x 600 mm (can be collapsed to 20 mm gap)
* Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 l/min up to max. 140 l/min)
----Paintwork:
* Chassis, drawbar, front bulkhead, mechanical drop supports, and ramps galvanized
* Axles, springs, air tank, front support winch, and flange towing eye painted black
* Drop sides painted in RAL 9010 pure white
* Side walls painted in any RAL color at extra cost
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Sample images
----Delivery time:
* Immediately available from Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to., verst. Strongwände, Kombi- Heckklappe
Ara
Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9
----Braking System:
* Wabco EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Towing Eye:
* Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* 2 LED reversing lights at the rear, activated via reverse gear
----General Attachments:
* Mechanical BPW landing gear at the front
* 2 mechanical foldable supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis
* Bolt-on underrun protection
* Plastic quarter mudguards
* Two-step access in front of the bulkhead on the left (direction of travel)
----Chassis:
* Chassis made from fine-grained steel
----Tipping Body:
* Net hooks located at the central locking bearings and 2 on the bulkhead
* Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards
* Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist
* Rear stanchions bolted
* Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping
* Locking via galvanized rotating rod lock at the rear and central locking
* Deactivation function for automatic tailgate on rear tipping with open wing door
* Rear mounting rail for loading ramps
----Load Securing:
* Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side
* 4 mm floor plate made of S 420 MC 4 fine-grained steel
Klsdpfx Adsxf Skvo Iju
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable compartment under the loading area, built into the chassis from the rear
----Paintwork:
* Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised
* Sidewalls and tailgate painted RAL 3003 ruby red
* Axles, springs, air tanks, and landing gear painted in black
----Info:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Ara
Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 Cable Drums (Cable Reel Mounts)
Kljdpfx Adsx Nlkao Ieu
----Braking System:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with raise/lower control
----Drawbar:
* Drawbar, 1,800 mm long, with 40 mm towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display capability on the truck dashboard via EBS signal (no installation required on the truck side)
* 15-pin power connector
* 2 additional LED reversing lights (activated via reverse gear)
* LED lighting
----General Attachments:
* Aluminum air tank
* Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm
* Side underrun protection
* Plastic quarter mudguards
* Rear underrun protection
----Flatbed:
* "Zurr-fix" outer frame, 45° bent, with drilled hole pattern for lashing points, lashing capacity per point: 2,000 kg at 480 mm spacing
* Option to install 3,000 kg folding lashing rings at approx. 600 mm spacing – 12 pcs 3,000 kg lashing rings included per side
* 5 pockets per side for stake tubes 100 x 50 mm in the outer frame – stakes themselves not included in delivery
* 30 mm phenolic resin-coated plywood floor
----Cable Drum Mounts (Drum Supports):
* 3 galvanized cable drum mounts secured by container locks with lateral forklift pockets, center-to-center 800 mm (pocket width 185 mm)
* Max. drum diameter 2,600 mm and max. drum width 1,650 mm
* Clear width between support arms approx. 1,775 mm, with crossbar
* 6,000 kg drum weight per cable drum mount
* Without drive system and drum brake
* Support arm with clamping latch to secure drum shaft
* Steel drum shaft, 76 mm diameter, with centering and rotating ends
* 2 clamping rings
* 2 centering cones made from polyamide
* 4 pcs 3.2 t lashing eyes on the support arms for customer-provided securing against drum rotation and unwinding
----Loading Height:
* Approx. 1,040 mm when loaded
----Paintwork:
* Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized
* Axles painted in black
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL18 t. Kombi Abroller Absetzer Tieflader, Luft
Ara
Durum: yeni, azami yük ağırlığı: 13.490 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, TRA-Kombi 18.0:
* 3-in-1 – suitable for hooklift, skip containers, and as a low-loader
----Brakes:
* EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10.5-ton axles
----Suspension:
* Air suspension with manual rear lowering
----Drawbar:
* Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment mechanism
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System), displayable in truck via EBS signal (no truck-side installation required)
* LED tail lights 12/24 V
Kledpfxowb Rake Ad Isu
* 15-pin electrical connector
----General Attachments:
* Tool box made of powder-coated steel plate
* Spare wheel carrier in basket design on right-hand side
* Enclosed side underrun protection
* Quarter mudguards with splash guards made of plastic
* Plastic rear impact protection buffers
* Folding A-board at rear
----Loading Platform:
* Hot-dip galvanized main frame with raised outer frame to guide roll containers
* Steel plate floor with roller recesses in the bogie area
* Suitable for hook lift container transport, container lengths from 5,500 – 7,000 mm
* Pneumatic four-point clamping lock and mechanically inserted front stops in the guide rails
* Transport of up to 2 skip containers with max. 10 m³ possible
* Eight repositionable skip stops for side centering. The front four can be inserted and are pivotable.
* Weld seam as anti-slip coating in the inclined ramp area
* Mechanical rear drop-down supports
----Load Securing:
* 3 pairs of 10-ton UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of skips; each side with 4 cloverleaf lashing brackets
* 1 pair of 13.4-ton UVV lashing rings facing towards the front
* Four 8-ton lashing eyes per side integrated into the outer frame
----Ramps:
* Aluminium loading ramps (10.6 ton/pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear)
----Painting:
* Reflective contour tape, sides and rear
* Frame hot-dip galvanized
* Axles and drawbar painted black
----Information:
* Load securing certificate according to DIN 30722-1
* Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700
* Permissible gross weight of 20,000 kg technically possible
* New vehicle, unregistered, with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery Time:
* Immediately available ex Egstorf
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Ara
Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum supports
----Braking System:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with lift/lowering device
----Tow Bar:
* Tow bar 1,800 mm long with 40 mm towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display capability in the truck cockpit via EBS signal (no installation required on truck side)
* 15-pin power plug
* 2 additional LED reversing lights (activated by reverse gear)
* LED lighting
----General Attachments:
* Aluminum air tank
* Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm
* Lateral underrun protection
* Plastic quarter fenders
* Rear underrun guard
----Platform:
* Zurr-fix external frame, 45° bent, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing
* Option for 3,000 kg lashing rings at approximately 600 mm intervals – 12 units of 3,000 kg lashing rings included per side
* 5 pockets per side in the outer frame for pipe stakes 100 x 50 mm (stakes not included)
* 30 mm phenolic resin plywood flooring
----Drum Supports:
* 3 galvanized drum supports secured by container locks with side forklift pockets, center/center 800 mm (pocket width 185 mm)
* Maximum drum diameter 2,600 mm, maximum drum width 1,650 mm
* Clear width between support arms approx. 1,775 mm with cross-connection
* Load capacity per cable drum support 6,000 kg
* Without drive and drum brake
* Support arm with tension latch for securing the drum shaft
* Steel drum shaft, 76 mm diameter, with centering and rotating ends
* 2 locating rings
* 2 centering cones made of polyamide
* 4 units 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding
----Loading Height:
* Loaded approx. 1,040 mm
----Coating:
* Chassis, turntable, tow bar, outer frame, underrun guard hot-dip galvanized
* Axles painted in a shade of black
----Information:
* Technical uprating to 30 t GVW possible
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
Kjdpex Nlkgjfx Ad Islu
* Available from approx. week 51 / 2026
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTALTandem- Stahl- 3- Seitenkipper mit Rollplane
Ara
Durum: yeni, azami yük ağırlığı: 13.410 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, yükleme alanı hacmi: 11 m³, Üretim yılı: 2026, * KA-TA-R 18.0 ML
* Wabco EBS-E (electronic braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes
* Tire pressure monitoring system with display capability in the truck’s dashboard via EBS signal (installation on the truck side not required)
* 2 x 9 t Gigant axles
* Air suspension with level control during tipping operation
* Drawbar with 50 mm flange eye (adjustable by +77 mm and -33 mm via offset plate)
* Jost landing gear at the front
* Foldable galvanized steel underrun protection for paver feeding
* Closed individual plastic fenders
* Standing platform at the front wall
* Manual roll-up tarpaulin
* 15-pin electrical connector
* LED tail lights with galvanized protective cover
* 2 LED reversing lights
* Chassis made of fine-grain steel
* Steel three-way tipper body (side walls with MM profile – continuous without central stanchion – side walls pendulum-mounted via manual central locking, left side foldable with wall spring assist)
* Roll tarp similar to RAL 7038 agate grey, with tarp tensioning by side ratchets and front and rear tensioning rubbers
* Front wall platform of grating with step at the drawbar and a hand grip on the front wall
* Tailgate made of HBW 400 steel, pendulum-mounted with automatic double claw lock
* 5 mm steel floor from HBW 450 steel
* Each side with 4 x 3 t recessed and foldable lashing rings – integrated in the steel floor
* Reinforced and certified structure according to EN 12642 XL including cargo securing certificate up to 19 t
* Side wall painting in a RAL color of your choice (excluding special or metallic paints) – color can be changed up to approx. 6 weeks before delivery
* Axles, air tanks, landing gear, flange towing eye painted in black tone
Ksdpoxl Nkgjfx Ad Ijlu
* Chassis, underrun protection and drawbar hot-dip galvanized
* New vehicle with full manufacturer’s warranty
* Errors and prior sale excepted
* Available from approx. week 44 / 2026
Küçük ilan
Wiesmoor
2.630 km
Roll-off dorse
MÜLLER-MITTELTALTRA Kombi Anhänger 18,0
Ara
Durum: ikinci el, azami yük ağırlığı: 13.640 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2019, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 1.000 mm, toplam genişlik: 2.500 mm, - Yeni HU (Muayene)
- Toplam ağırlık: 18.000kg / 20.000kg
- Boş ağırlık: 4.360kg
Ksdpfxjyw Ep Ss Ad Iolu
- Taşıma kapasitesi: 13.640kg / 15.640kg
Diğer bilgiler
- Çift lastikli 235/75R17,5
- Gigant akslar
- 4 çift yük sabitleme halkası
- PNömatik kilitleme sistemi
- Alçaltılabilir döner şasi
- Yaklaşık 2.300mm'lik rampa, saklama bölmesinde
- Arka destek ayağı
- Ekipman dolabı
- Alt koruma
Küçük ilan
Coppenbrügge
2.460 km
Müller-Mitteltal KWH 9.9 - kablo makarası römorku
Müller-MitteltalKWH 9.9 - Kabeltrommel-Anhänger
Ara
Durum: yeni, Üretim yılı: 2026, New model, now with 9,900 kg gross vehicle weight!
Cable drum transport trailer. Permissible gross weight: 9,900 kg, payload approx. 7,000 kg (standard equipment). Hydraulic lifting and lowering of the cable drum from the towing vehicle or via separate engine (4-stroke petrol, 8.1 kW, electric start) with weather protection cover, hydraulically driven drum with rubber-coated drive rollers, drum diameter 800–3,000 mm, drum width up to approx. 1,650 mm, centring cones for cable drums. Dual-speed support winch at the front, extendable rear support. BPW axle, EBS, parabolic suspension, tyres 315-80R22.5, tyre pressure monitoring. Height-adjustable 40 mm towing eye, 2-line air, LED lighting 12+24 V. Toolbox, advertising panels integrated into the side underrun protection. Fully hot-dip galvanized vehicle. New vehicle including factory warranty. Available from approx. week 26, 2026. (Archive photos)
= Further information =
Ksdpfeyyhb Nsx Ad Iolu
Unladen weight: 2,900 kg
Payload: 7,000 kg
Gross vehicle weight: 9,900 kg
Front tyres: 315-80R22.5
Country of manufacture: DE
Please contact Jan-Marc Schwickert for further information.
Küçük ilan
Koenigs-Wusterhausen
2.227 km
Alçak şasi römork
MÜLLER-MITTELTALTieflader T 4 Profi 40,0 Tiefladeranhänger hydr.
Ara
Durum: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 02/2020, bir sonraki muayene (TÜV): 02/2027, yükleme alanı uzunluğu: 9.800 mm, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, * ABS
* Rear support
* BPW ECO-Plus axles
* Amber rotating beacon
* Alloy wheels
Klsdpfxsy T Dh Sj Ad Iju
* Duomatic air coupling
----Body: Galvanized low-loader trailer (2500+7300mm)/Loading height approx. 900mm, rear sloped/Ramp height approx. 770mm, steel/wood floor with anti-slip covering, extendable to 3 meters, hydraulic loading ramps (folded for low loading angle) with anti-slip covering, also hydraulically laterally adjustable, lashing rings
Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE !!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. The basis for all purchase contracts, invoices, proforma invoices, orders, and sales discussions are our terms and conditions (see imprint).
Küçük ilan
Alsdorf
2.622 km
Alçak şasi römork
MÜLLER-MITTELTALETÜTAR 14,4 Tieflader, LED, Runduml.
Ara
Durum: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform | Trailer
Available in 37th week of 2026. Inquiry no.: 31941. Delivery to your address possible.
* We are happy to provide a tailored offer.
* -----
* Gross weight: 14.4 t, Payload: 10.95 t
* LED lighting system
* GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs
* Tire pressure monitoring system (TPMS)
* 6.27 m x 2.47 m platform with galvanized 400 mm front wall
* Digger bucket rest made of hardwood bolted to the front wall
* Unladen deck height: 930 mm / Laden: 870 mm
* One-piece ramps with hot-dip galvanized anti-slip grating, adjustable to approx. 20 mm width, secured by holding rods and diagonal supports
* Ramp lift with vertically mounted, adjustable springs for convenient single-operator use
Kedpfx Aozbfmqod Ijlu
* 4 UVV drop lashing rings (LC 6300 daN)
* Perforated outer frame (45° angled, with lashing holes; lashing point load capacity LC 2000 daN at minimum 480 mm spacing). Installation of drop lashing rings LC 3000 daN approx. 600 mm apart possible. Tight crossmember spacing, high-profile front & rear ends with rear loading slope, hot-dip galvanized
* 10 UVV lashing rings LC 3000 daN, retractable in the existing hole pattern on the outer frame, in addition
* Additional lashing options via drilled holes (Ø 50 mm, LC 1200 daN) in front and rear beams
* Toolbox mounted in front of the front wall
* Side marker lights with indicator function
* 50 mm thick softwood floor. Chassis hot-dip galvanized
* Height-adjustable landing gear at the front, folding supports at the rear
* 2 container locks recessed in the front crossmember
* Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable. 50 mm towing eye available on request
* 1 removable LED beacon at the rear
-----
* Leasing, hire purchase, financing, trade-in available
* Example: €525 per month, 60-month term, no down payment, no final installment
-----
* Our opening hours:
* Monday – Thursday: 08:00 – 17:00
* Friday: 08:00 – 15:00
Outside of opening hours, appointments are possible by arrangement.
We speak German, English, Polish, French.
Leasing, financing, and trade-in available.
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL18 t. Kombi Abroller Absetzer Tieflader, Luft
Ara
Durum: yeni, azami yük ağırlığı: 13.490 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, TRA-Kombi 18.0:
3 in 1 = for roll-off containers, skip containers, and as a low loader
---- Brakes:
* EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
---- Axles:
* 2 x 10.5-ton axles
---- Suspension:
* Air suspension with manual lowering at the rear
---- Drawbar:
* Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment
---- Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System), display possible in the truck via EBS signal (no installation required in the truck)
* LED tail lights 12 / 24 V
* 15-pin power connector
---- General Mounted Parts:
* Toolbox made of powder-coated sheet steel
* Spare wheel holder in basket design, right side
* Closed side underrun protection
* Plastic quarter mudguards with splash protection
* Plastic rear underrun protection buffers
* Folding rear A-sign
---- Loading Platform:
* Hot-dip galvanized main frame with raised outer frame for guiding roll-off containers
* Steel sheet floor with wheel wells in the bogie area
* When transporting roll-off containers, container length of 5,500 – 7,000 mm possible
* Pneumatic 4-point clamp lock and mechanically insertable stop angles at the front in the runway
* Transport of up to 2 skip containers with a maximum volume of 10 m³ possible
* Includes 8 repositionable bin stops for lateral centering of bins, front 4 bin stops inserted with swiveling stop
* Weld bead as anti-slip surface in the ramp area
* Mechanical drop-down supports at the rear
---- Load Securing:
* 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements to secure bins by friction and form fit, 4 lashing rails in cloverleaf design (side)
* 1 pair of 13.4 t UVV lashing rings at the front
* Each side with 4 x 8 t lashing eyes recessed in the outer frame
---- Ramps:
Ksdpsl Tld Iofx Ad Ijlu
* Aluminium approach ramps (10.6 t / pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear)
---- Paintwork:
* Reflective contour tape on the sides and rear
* Frame hot-dip galvanized
* Axles and drawbar painted black
---- Information:
* Load securing certificate in accordance with DIN 30722-1
* Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700
* --Permissible total weight of 20,000 kg technically possible--
* New vehicle without first registration with manufacturer warranty
* Errors and prior sale excepted
---- Delivery Time:
* Available immediately from Egstorf
Küçük ilan
Alsdorf
2.622 km
Üç yöne devirmeli römork
MÜLLER-MITTELTALKA-TA-R 14,4 Breitreifen, Rampen
Ara
Durum: yeni, azami yük ağırlığı: 11.050 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low-loader Three-way tipper trailer with ramps
* NEW VEHICLE
* Now available immediately in RAL 9016 traffic white
* Leasing, financing, and trade-in of your old trailer possible
* Ref. No. for inquiries: 11654
* ABS with optional truck display via EBS signal
* Side marker lights with indicator function
* Gross weight: 14,400 kg, Payload: 11,050 kg
* EBS 2S/2M
* Galvanized floor 5m x 2.42m x 0.5m, laser-welded sideboards, swinging, folding, removable, pre-fitted for later sidewall extension kits
* Lockable compartment under the tipping bridge for loading ramps
* Includes 1 pair of aluminium loading ramps, 8t/pair, length: 3.57m
* Chassis hot-dip galvanized, front wall hot-dip galvanized
* 4 UVV tie-down rings LC 5000daN (front & rear) + 8 recessed and foldable lashing eyes LC 3000daN in the tipping floor (centrally aligned)
* Hardwood excavator bucket rest
* Two-step access in front of the front wall (hot-dip galvanized)
Kledpfx Aeyvxg Ijd Isu
* Continuously height-adjustable, hot-dip galvanized drawbar, 40 mm towing eye
* Wide tyres 385/55R 19.5 (4x), parabolic springs
* Net hooks, bolted rear stanchions, hot-dip galvanized
* Guide ropes for the rear drop side
* Plastic toolbox on the right-hand chassis frame
* LED lighting system 12 + 24 Volt
* 2 LED reversing lights at the rear of the trailer
* Lease-purchase price:
* e.g. €560 for 60 months, without down payment, no residual value. An offer from our financing partner "FM LeasingPartner". Other terms with/without residual value or down payment available.
* Request an offer from us!
* We are Müller-Mitteltal authorized dealer
* Delivery to your site possible with timely order!
----Our opening hours
Monday – Thursday: 08:00 – 17:00
Friday: 08:00 – 15:00
Outside of business hours, we are available by appointment.
We speak German, English, Polish, French.
WhatsApp
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL18 t. Kombi Abroller Absetzer Tieflader, Luft
Ara
Durum: yeni, azami yük ağırlığı: 13.490 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, TRA-Kombi 18.0:
* 3-in-1 – suitable for hooklift, skip containers, and as a low-loader
----Brakes:
* EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10.5-ton axles
----Suspension:
* Air suspension with manual rear lowering
----Drawbar:
* Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment mechanism
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System), displayable in truck via EBS signal (no truck-side installation required)
* LED tail lights 12/24 V
* 15-pin electrical connector
----General Attachments:
* Tool box made of powder-coated steel plate
* Spare wheel carrier in basket design on right-hand side
* Enclosed side underrun protection
* Quarter mudguards with splash guards made of plastic
* Plastic rear impact protection buffers
* Folding A-board at rear
----Loading Platform:
* Hot-dip galvanized main frame with raised outer frame to guide roll containers
* Steel plate floor with roller recesses in the bogie area
* Suitable for hook lift container transport, container lengths from 5,500 – 7,000 mm
* Pneumatic four-point clamping lock and mechanically inserted front stops in the guide rails
* Transport of up to 2 skip containers with max. 10 m³ possible
* Eight repositionable skip stops for side centering. The front four can be inserted and are pivotable.
* Weld seam as anti-slip coating in the inclined ramp area
* Mechanical rear drop-down supports
----Load Securing:
* 3 pairs of 10-ton UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of skips; each side with 4 cloverleaf lashing brackets
* 1 pair of 13.4-ton UVV lashing rings facing towards the front
* Four 8-ton lashing eyes per side integrated into the outer frame
----Ramps:
* Aluminium loading ramps (10.6 ton/pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear)
----Painting:
Kjdpfx Adel Tnwzj Iolu
* Reflective contour tape, sides and rear
* Frame hot-dip galvanized
* Axles and drawbar painted black
----Information:
* Load securing certificate according to DIN 30722-1
* Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700
* Permissible gross weight of 20,000 kg technically possible
* New vehicle, unregistered, with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery Time:
* Immediately available ex Egstorf
Küçük ilan
Legden
2.617 km
Alçak şasi römork
MÜLLER-MITTELTALT4 Tieflader 40to. hydr. Rampen verbreiterbar
Ara
Durum: ikinci el, azami yük ağırlığı: 31.820 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/1980, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 3.000 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 900 mm, Üretim yılı: 1980, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal T4 Low-bed Trailer
* SAF axles with drum brakes
* Twin tires
* Low-bed deck with platform extension
* Hydraulic loading ramps, adjustable (2 units)
* Drivable gooseneck
* Additional rear supports
* Turntable design
----Dimensions & Loading Platform
Kljdpsy Skl Iofx Ad Ieu
* Loading platform length approx. 9,800 mm
* Loading platform width: 2,550 - 3,000 mm
* Loading platform height: 900 mm
----* Permissible total weight: 40,000 kg
* Payload: 31,820 kg
* Tyres: 235/75R17.5
----Vehicle number: 11892
----Errors and prior sale reserved
----Advertising and various inscriptions have been digitally removed.
-----We are happy to assist you with all formalities arising from the purchase of a vehicle. Simply let us know your requests and suggestions, and we will take care of them. Among other things, we can offer the following services for an additional fee:
----Trade-in of your old vehicle
TÜV or safety inspection
Complete export processing
Financing arrangement
Application for export licence plates
Vehicle transfer
Vehicle registration
Vehicle recovery and transport
?YOUR VTS TEAM
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal tandem-tieflader anhänger ets-ta-b 11,9"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.


































































































































































































































































































































































































































































































