Kullanılmış Stas Schubboden S300 Zx, 2Xliftachse, Funk, Getreidegosse, 7Mm satın al (7.724)

Koşul: ikinci el, makine/araç numarası: YE6SZ339V600R0459, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2006, yükleme alanı uzunluğu: 13.350 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.750 mm, toplam uzunluk: 13.950 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 4.000 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: diğer, Üretim yılı: 2006, Donanım: ABS, = Additional Options and Equipment = - Hydraulics = Remarks = Chassis Chassis height: 100 cm Coupling pin / drawbar height: 120 cm Structure Hydraulics: ✓ Tank Fuel: ✓ = Additional Information = Axle Configuration Tyre size: 385/65 R22.5 Axle brand: Mercedes Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 65%; Tyre tread right: 10% Axle 2: Tyre tread left: 75%; Tyre tread right: 15% Axle 3: Tyre tread left: 70%; Tyre tread right: 15% Weights Unladen weight: 7,960 kg Payload: 31,040 kg Gijdpfoyq R Rysx Actst GVW: 39,000 kg Functional Body brand: Stas Loading platform height: 110 cm Identification Registration number: QAZ297 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Koşul: ikinci el, boş ağırlık: 7.910 kg, azami yük ağırlığı: 31.090 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2018, süspansiyon: hava, lastik boyutu: 385/65 22,5, lastik durumu: 40 yüzde, renk: gümüş, Üretim yılı: 2018, ön lastik ölçüsü: 385/65 22,5, arka lastik boyutu: 385/65 22,5, şoför kabini: gündüz kabini, emisyon sınıfı: hiçbiri, Donanım: ABS, kamyon kaydı, Reference number for inquiries: 40573 Stas, S 300CX * Year of manufacture: 2018 * ABS (Anti-lock Braking System) * Air suspension * Lift axle * Air coupling head (red + yellow) * 15-pin connector plug * Lifting and lowering device * Storage box / toolbox * Aluminum tipping body * Access platform * Roll-up tarpaulin * Grain discharge slider * Suspension: air * Gross vehicle weight: 39,000 kg * Unladen weight: 7,910 kg * Payload: 31,090 kg * Permissible total weight: 39,000 kg * Tire condition, 1st axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition, 3rd axle: 50% -- 50% - Tire size: 385/65 R22.5 * Tire size: 385/65 R22.5 * Wabco SmartBoard * Rear support * Wear plates, right & left * Folding underrun protection Disclaimer: Subject to change, prior sale, and errors excepted. You can find additional photos and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering export license plates / customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Gisdpjyicqyefx Actot Please consult our trained staff; we will be happy to advise you.

Koşul: ikinci el, azami yük ağırlığı: 27.500 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2023, bir sonraki muayene (TÜV): 06/2025, yükleme alanı hacmi: 100 m³, Üretim yılı: 2023, Donanım: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length Silver-grey BIOSTAR – STEERING AXLE – V14900 – VERTICAL FRONT WALL – VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross vehicle weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg Fifth wheel height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS Gisdpfexplxzsx Actst FIFTH WHEEL HEIGHT: Accurate fifth wheel height is 1,150 mm. AXLES Tridem: Brand: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 t Suspension: Original SAF air suspension Brakes: large disc Offset: ET 120 BVA: with The first axle is an automatic lift axle controlled via the EBS-E system. The third axle is a self-steering trailing axle. CONNECTION BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: No lift axle. With traction aid. TRACTION AID: The traction aid is activated by pressing a button in the truck (truck equipment not included). AIR SUSPENSION: Lifting and lowering equipment. Aluminium air tank. STEERING AXLE LOCK: The self-steering trailing axle is locked as follows: – via the reversing lights – via a button in the truck (truck equipment not included) TYRES: 6 x 385/65 R 22.5 regional transport tyres (manufacturer’s choice) on ALCOA MATT aluminium rims. ET 120. BRAKING SYSTEM – EBS: WABCO EBS-E 2S/2M system – PREMIUM MODULATOR 2-line compressed air braking system according to CE guidelines. Spring-loaded parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING – ASPÖCK 24 Volt electrical system. 2 x 7-pin + 1 x 15-pin ISO sockets. Aspöck kit. Orange LED side marker lighting mounted to the trailer. Without rear junction box – NORDIC. REAR LIGHTING IN UNDER-RUN PROTECTION: Lighting is mounted in the fixed aluminium under-run guard. With foldable aluminium lighting guard. 2 x 1 five-chamber rear lights – EUROPOINT III – LED version. HYDRAULIC CONNECTION: Connection at the front wall. With additional connection possibility below the body in front of the landing legs. ACCESSORIES REAR EXTENDABLE LADDER: Extendable ladder integrated at the rear of the vehicle, right side. PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER: Single aluminium spare wheel holder 2. BODY FRONT WALL: The front wall is made of robust aluminium plank profiles. INNER FRONT WALL TO FLOOR SEAL: Fixed seal between the floor and front wall using aluminium profile and PVC sealing. SIDE WALLS: Side walls smooth inside and out. Double-wall profiles, 600 mm wide – 30 mm thick – 3 mm inside, 2 mm outside (grain version). The side wall profiles are welded continuously on the inside. WEAR PLATE: Rectangular aluminium wear plate, inside rear, 2,000 (L) x 1,500 (H) x 4 mm. MOVING FLOOR SYSTEM: Cargo Floor CF 500 SL-C E-control. 21-board floor system. Drive segment consisting of 3 double-acting hydraulic cylinders with a stroke of 200 mm. Rear closure plate made of stainless steel. FLOOR SYSTEM CONTROL: E-control – Electric with radio remote control (original Cargo Floor). Load – stop – unload via switch. Manual emergency operation using unique red Cargo turn knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floorboards. FLOORBOARDS: 21 aluminium floor boards – 8 mm ribbed with welded aluminium end caps. REAR DOOR: 2 portal hinged...

Koşul: ikinci el, azami yük ağırlığı: 29.990 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2024, yükleme alanı hacmi: 52 m³, toplam genişlik: 2.550 mm, Üretim yılı: 2024, Donanım: ABS, Chassis Type: V-Chassis Kingpin Load National (t): 12 Axle Load National (t): 8 Axle Spacing (mm): 1310-1310 Fifth Wheel Height (mm): 1150 Chassis Width (mm): 1400 Loading Width (mm): 2475 Chassis Series: 090 Gross Vehicle Weight Rating (techn.): 39=12+9+9+9 t Internal Height Front (mm) (IHF): 2165 Internal Height Rear (mm) (IHB): 2165 Volume (m³): 51.8 Overall Width (mm): 2550 Gisdpfx Aeupqi Eoctst Wheelbase (mm) (WB): 6800 Overall Length (mm): 10656 Chassis: Chassis Material: Aluminium Tyre Size: 385/65R22.5 Load Length (mm): 9665 Axle Manufacturer: JOST (STAS manufacturer’s choice) Wheel Offset (ET): 120 Option 1st Axle: with lift axle and starting aid Activation of starting aid via button in truck (button installation not included in equipment scope) and by pressing brake pedal three times Option 3rd Axle: with lift axle and Optiturn Activation of additional lift axle control via Wabco Smartboard Brake Pad Wear Indicator: connected Tire Pressure Monitoring: Wabco Trailerpulse Air Suspension: ECAS with lift and lowering valve Automatic lowering of air suspension during tipping operation, can be manually locked via smartboard and switch on chassis Pneumatic Coupling Head: European palm coupling Tyre Brand: Manufacturer's choice Rims: Alcoa Dura Bright Tyre Type: Regional distance Wheel Nuts: Open Wheel Nut Caps: Chrome with STAS logo Landing Legs: Weweler as steel gear landing legs, type Weweler, with compensating feet, single-side operation, and 2 speeds Underrun Protection Operation: Manual Underrun Protection Mudflaps: Black with STAS logo, mounted across full width of underrun protection Mounting of Mudflap on Underrun Protection: Fixed Underrun Protection Cover: with covers Handle on underrun protection Control Console: EBS controls on the left in direction of travel, in front of axles Toolbox: Position: left in direction of travel, in front of axles Material: plastic Dimensions: 860x520x500 mm Mudguard Type: Domar STAS with white line Number of Mudflaps on Mudguard: 2 pcs Mudflap Type Mudguard: Clear Pass Lighting Manufacturer: Aspöck Lighting Type: ECOLED II Work Lights (operated via switch): 2 pcs LED reverse lights, rear, left and right in direction of travel, on the last cross beam of the chassis (controlled via reverse signal) Work Light Position (operated via switch): 2 pcs LED reverse lights front, left and right in direction of travel, mounted in the area of landing legs Tipping Cylinder Manufacturer: Hyva (STAS manufacturer’s choice) Tipping Cylinder Type: Hydraulic cylinder with large casing Tipping Cylinder Tilt Angle Normal: ±47° Tipping Cylinder Model: Hyva - FC 169 Tipping Cylinder Stroke: 7130 Tipping Cylinder Max. Pressure: 250 Cylinder Stage Surface Treatment: standard surface treatment Hydraulic Coupling: Rotary coupling Hydraulic Coupling - Size: 1 Hydraulic Coupling - Gender: Female Hydraulic Coupling - Hose: 2,500 mm Smartboard Type: Standard Air Connection: left in direction of travel, on lamp bracket Aluminum Access Ladder 3 m - mounted right in direction of travel Access Ladder Mounting for rear entry with hook Broom and Shovel Holder: 3 holders each, mounted on the chassis left in direction of travel Two plastic chocks incl. holder Locking Device Chassis-Superstructure: Rubber polyps (not for FSS 74 & 86) Air and Electrical Console: mounted right in direction of travel Body: A-plate on tipping body (not foldable) - right side Incline

Koşul: ikinci el, azami yük ağırlığı: 30.060 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2024, bir sonraki muayene (TÜV): 06/2025, yükleme alanı uzunluğu: 9.665 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 9.665 mm, yükleme alanı hacmi: 51 m³, Üretim yılı: 2024, Donanım: ABS, Last Königszapfen National 12t Fifth wheel load National 12t Axle load National 8t Axle spacing 1310-1310mm Coupling height 1150mm Chassis width 1400mm Internal height front 2165mm Internal height rear 2165mm Overall width 2550mm Wheelbase 6800mm Overall length 10656mm Chassis material Aluminum Tyres 385/65R22.5 Loading length 9665mm Axles SAF Brake type SAF - SBS 2220 Offset (ET) 120 Option 1st axle with lifting axle and start-up aid Start-up aid activation via button in the truck (button installation not included in standard scope) and by pressing the brake pedal 3 times Brake lining wear indicator Not connected Tire pressure monitoring system (Tire Pilot) Not included Tire pressure monitoring Wabco Trailerpulse Air suspension ECAS with lift/lower valve Air suspension lowering Automatic lowering of air suspension during tipping operation, can be manually locked via Smartboard and switch on chassis Coupling head pneumatic European palm coupling Wheel nut covers Chrome with STAS logo Landing gears Aluminum drop leg landing gears mounted at the front of the chassis, individually operated from both sides, support load 20t / per leg Underrun protection operation Manual Towing eye 1x in drive direction Splash guards underrun protection Black with STAS logo Underrun protection cover Handle on underrun protection Included EBS operating console In drive direction in front of the axles Toolbox position In drive direction left, in front of the axles, plastic Toolbox dimension - left in front of axles 860x520x500 Giedjuar Amopfx Actet Mudguard type Domar STAS with white line Number of splash guards on mudguard 2x Type of mudguard splash guards Clear Pass Lighting manufacturer Aspöck Lighting type ECOLED II Work lights (activated by switch) Included Position work lights (switch activation) 2x LED reversing spotlights at the front in drive direction left and right, area of landing gears Tipping cylinder manufacturer Hyva Tipping cylinder type Hydraulic cylinder with large jacket Tipping cylinder model Hyva - FC 169 Tipping cylinder stroke 7130 Tipping cylinder max. pressure 250 Cylinder stage surface treatment Standard surface treatment Hydraulic coupling Swivel coupling Hydraulic coupling - size 1 Hydraulic coupling - gender Female Hydraulic coupling - hose 2,500 mm Smartboard Aluminum leaning ladder 3 m Fastening of leaning ladder at rear access With hook for hanging Position broom and shovel holder With 3 holders each, at chassis on left side in drive direction Load pressure gauge Ø 100 mm - mounted front on chassis With two plastic wheel chocks including holders Safety catch chassis - body Rubber buffers Air and electrical console Centrally located in drive direction with gantry Front wall inclination (°) 90 Rear wall inclination (°) 90 Rear wall type Combination door Inclination of lower belt profile inside (°) 90 Floor 8 mm ALU - 110 Brinell Position rubber pads under floor crossmembers Front wall 4 mm (Alu) Side wall profile 3 mm - 2 mm in smooth finish inside and outside, double-wall profiles 600 mm wide - 30 mm thick Rear wall Alu Type of combination door 1/2 - 1/2 with swiveling upper cross tube Door wing opening Right door wing opens first (manufacturer's choice) Upper cross tube Swiveling Hinge type With double door hinge (double joint hinge) Slider Rectangular type, standard Slider position 2 sliders with operating lever, one each on left and right in drive direction Fixing of opened door wings Fixing using chains Seal rear wall With standard rubber gasket

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2008, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium parts, continuous rubber strip pressure-bonded to the longitudinal members, maximum stability via integrated tipping shaft with wear-resistant, pressed-in special bushings, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit Giodpfx Aoxf Spfectet Axles and Suspension, Disc Brakes Jost-disc axle units 3 x 9 tonnes with DCA air suspension, lift and lower valve, load gauge, 3rd axle automatically liftable Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 50-60% tread on silver steel rims, 11.75x22.5 ET 120 Landing Legs Mechanical support legs, load capacity 2 x 20 t, swing feet used for air suspension Brake System According to E.C. standard, two-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E system 2S/2M, with RSS (Roll Stability Support), ALU air tank Electrical System According to StVZO regulations, with two 5-chamber Aspöck LED tail lights, 24 Volt system with two 7-pin and one 15-pin socket at the front, EBS socket, with LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Tipping Body / Dump Bed ALU dump body, side walls with welded vertical aluminium profiles, floor approx. 6 mm in highly wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall angled design in 4 mm ALU with reinforcing profiles for hydraulic cylinder mounting, side walls in 3 mm hard alloy, straight rear wall, automatic pneumatic (lockable) universal tailgate with pendulum and 2/3-1/3 barn door configuration, double hinge, made from 4 mm thick aluminium, 1 grain chute with water protection, wear plates fitted on side approx. 400-1,000mm x 3,000mm x 4mm Hydraulic System Hydraulic cylinder mounted at the front wall, operating pressure 150 bar, brand Edbro, with approx. 2 m hydraulic hose and 1" quick-release coupling Accessories 6 Parlok plastic mudguards with 2 Stas splash guards, 3 m aluminium ladder, reinforced and foldable underrun protection with 2 towing eyes, one foldable side underrun guard, catwalk on front wall with access ladder (left side), 3 swivelling ALU bows, 1 central additional bow holder, rolling tarp with aluminium tube in centre, rolling tarp system, approx. 660g/m² quality, tarp fastener with quick-action lock (no lashing straps), wheel brace, 2 chocks, toolbox type 800, continuous splash flap on underrun guard, etc. Offer and images are subject to prior sale/change.

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, yükleme alanı uzunluğu: 10.550 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 50 m³, Chassis light version Aluminium (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension Disc brakes 430 mm "Off Road Version" SAF Intradisc axle units 3 x 9 t with SAF air suspension, central air bag arrangement next to the chassis longitudinal beams, 1st axle liftable with drive-off aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with trailing steering, electrically lockable, Tyres and Wheels 6 wheels fitted with 385/65 R 22.5 tyres, approx. 40-50 % tread remaining, with Alcoa aluminium rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminium rims Landing Gear Mechanical version with single-side operation, 2 speeds, with swing foot for air suspension, 2x20t static load capacity Braking System According to E.C. standards, twin-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E including RSS (Roll-Stability-System), Wabco Smartboard info center, aluminium air reservoir system Electrical System According to StVZO regulations, with 2 five-chamber lamps type Aspöck Ecopoint 2, 24-volt system with 2x7- and 1x15-pin sockets, with lateral outline marker lights, 2 separate LED reversing lights at the rear. All air and electrical lines neatly installed in plastic tubing. Tipping Body/Bin Body, fully welded interior Giedpoxf Sn Iofx Actet Aluminium bin, side walls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded, floor 8 mm thick high wear-resistant alloy (5383H34/HB 110), bulkhead 4 mm reinforced in straight version, rear wall as double swing doors in straight version with 2 half/half doors each with a grain chute, pneumatic floor vibrators underneath, rear hanger made of aluminium, swing-out, two hold-downs with rubber buffers on the tipper bin attached to the frame at the bulkhead, Hydraulic System Tipping cylinder with "cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted to the bulkhead, working pressure 220 bar, make Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48° Accessories 6 Parlok mudguards, full-width spray flaps fitted to underrun protection, aluminium spare wheel holder, foldable lateral underrun protection right-hand side, large 860-type toolbox, approx. 3 m aluminium ladder, 3 mid-position, approx. 150 mm raised swing bars, rolling tarp with central light strip and separate reinforcements at wear points, approx. 660 g/m² quality, with rolling tarpaulin system, perimeter rubber cord in rear end of tarp with two tension hooks to fix onto the rear swing bar, catwalk on bin with access on left, side tarp lock with tensioning straps, rear tarp closure with welded-in rubber cord for water resistance, robust foldable aluminium underrun guard with two towing eyes left and right including locking pins, 2 "Clear-Pass" spray flaps on the mudguard to EC standard, etc. Offer and images non-binding.

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2021, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.200 mm, yükleme alanı hacmi: 53 m³, Chassis, Lightweight Version Made of aluminum (15-6-12) Two fully-automated, welded I-beams longitudinally, with welded cross members. Chassis width: 1,600 mm Axles and Suspension: 430 mm disc brakes, 'Off-Road Version', SAF Intradisc Light axle units, 3 x 9 t with SAF air suspension, centrally aligned with the chassis longitudinal member, 1st axle liftable via air bags with starting aid and manual forced lowering, SmartBoard info center, Hebert lowering valve, front load pressure gauge Wheels and Tires on Aluminum Rims 6 wheels with 385/65 R 22.5 tires, approx. 50% tread, wheels 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims Kingpin 2” screw-in on an 8 mm thick 'light' mounting plate Landing Legs Support winches, each with 20 t capacity, swing foot for air suspension Brake System According to EC standards, dual-line Wabco system, spring-loaded parking brake acting on two axles, and Wabco EBS-E incl. RSS (Roll Stability System), Wabco SmartBoard Info Center, aluminum air tank system Electrical System According to German Road Traffic Licensing Regulations (StVZO), with 3 round triple-chamber Aspöck tail lights, 24-volt system with 2x7-pin and 1x5-pin sockets, 2x7 side marker lights, 2 centrally mounted LED reversing lights, 1 round fog lamp, 4 LED work lights, 1 interior LED light, 4 red LED position lights in rear door frame All air and electrical lines are properly laid in plastic conduits! Godoyiw T Eepfx Actjit Tipper Body / Tipping Body, "Smooth Construction" Body internally fully welded, aluminum tipping body, 30 mm thick plank profiles (2-3 mm), 600 mm wide welded side panels, 8 mm thick highly wear-resistant floor alloy (5383H34/HB 110) with 90° profile to side wall, 4 mm reinforced, straight front wall, universal straight rear door with two half-and-half swing doors and a grain chute, universal door automatic pneumatic operation with separate lockable lever, swingable ALU rear hoop, two hold-downs with rubber buffers on the tipper body fixed to the front wall frame. Hydraulic System—Tipping Cylinder with "Cladding" Mounting Hydraulic cylinder mounted on front wall with working pressure of 150 bar, Edbro brand, with approx. 2.5 m hydraulic hose and loose end 1”, tipping angle appx. 48° Accessories 6 Parlok mudguards, full-width splash guard mounted on underrun protection, no spare wheel holder, foldable aluminum side underrun protection (right), large Type 860 toolbox, approx. 3 m aluminum ladder, 3 central aluminum swing hoops, approx. 150 mm raised, additional mid mount, roll tarp with central skylight and extra reinforcement in wear areas, quality approx. 660 g/m², roll tarp system with quick-tension closure, all-round rubber rope at rear with two tension hooks to fasten on rear swing hoop, walkway on the frame, rear tarp edge has welded-in rubber cord for water protection, robust foldable underrun guard, 2 "Clear-Pass" spray flaps on the mudguard (EU standard), ALU grain funnel with dust sack fixed to the side of the frame, holders for shovel, broom, and scraper above the axles, etc. Unladen weight: 5,950 kg Offer and images non-binding.

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2013, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 46 m³, Chassis, lightweight version In aluminium (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width: 1,600 mm Axles and suspension, disc brake 430 mm "off-road version" SAF Intradisc light axle assemblies, 3 x 9 t with SAF air suspension, air bellows centrally aligned to the chassis longitudinal beams. 3rd axle liftable with starting aid and manual forced lowering, Smart Board Info Center, raising/lowering valve, BVA brake wear indicator Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 60-70% tread remaining, silver steel rims, 11.75x22.5 ET 120, UNI-wheel bolts Kingpin 2" – bolted into an 8 mm thick plate Gedpfxoyiw T Se Acteit Landing Legs Mechanical support winds, 2-speed, 2x20t load bearing capacity, with swivel base for air suspension Brake System According to E.E.C. standards, dual-line Wabco system, spring-loaded parking brake acting on two axles, and Wabco EBS-E incl. RSS (roll stability system), Wabco Smartboard Info Center, aluminium air tank system Electrical System Compliant with StVZO regulations, with 2 five-chamber Aspöck lamps, 24V system with 2x7- and 1x15-pin sockets, featuring side marker lights, 2 separate halogen reversing lights, all air and electrical lines neatly routed in plastic conduits Tipping Body/Tipper Body “smooth design”, fully welded on the inside Aluminium tipper body, sidewalls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded; floor 6 mm thick, high-wear resistant alloy (5383H34/HB 110) with 45-degree chamfer to the sidewall; front wall 4 mm reinforced, slanted design; rear wall as universal door, straight, with two wing doors in 2/3-1/3 configuration, fitted with a grain slide; ALU round profile welded to side and bottom of rear doors to seal the door gap; rear doors partially clad smooth in aluminium; operation of the universal door is automatic-pneumatic with separate lockable lever; rear bow swing-out in ALU; two hold-down clamps with rubber buffers attached between the tipper body and the frame at the front wall Hydraulics Tipping cylinder with "Rotulen" suspension (light version). Hydraulic cylinder mounted on the front wall with an operating pressure of 150 bar, make Edbro with approx. 2.5m hydraulic hose and 1" quick coupling, tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete with splash guards spanning the entire vehicle width attached to the underrun protection, without spare wheel holder ALU, collapsible side underrun protection on the right, large toolbox type 860, approx. 3 m aluminium ladder, 3 aluminium folding bows raised by approx. 150 mm centrally; additionally, one centrally mounted bow holder for positioning a total of 2 bows to increase loading width; rolling tarpaulin with central light strip and separate reinforcements in wear areas, approx. 660 g/m2 quality with rolling tarp system; all-round elastic cord at rear closure of tarp, with two tension hooks attached to the rear swing bow; catwalk on the frame in chassis color with access steps left and right; side tarp lock with quick release closure; rear tarp closure with welded-in elastic cord for water resistance; robust foldable underrun protection in aluminium; 2 "Clear-Pass" splash guards on the mudguards as per EC standard; laterally attached to the frame is an ALU grain hopper with tarpaulin sack; holders for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,960 kg Offer and images subject to change.

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 93 m³, Chassis Version with reinforced continuous frame, newly manufactured superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high in reinforced design (for high ground load capacity), additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to the support assembly (trailer construction max. 39,000 kg). Axles and Suspension "Disc brake 22.5" Jost (DCA) axle assemblies, 3x9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard infotainment center, electronic brake lining wear indicator (BVA) readable in the tractor unit (display), first axle with start-up aid (new EU regulation, without tractor unit equipment) (optional: 1st and 3rd axle liftable). Tyres and Wheels 6 wheels fitted with tyres size 385/65 R 22.5 of manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Landing Legs Mechanical landing gears with two speeds, 2x 20 tonnes load capacity with swivel foot. Gedpfxsyh S Ais Actoit Brake System In accordance with EU standard; EBS electronic system Wabco with RSS (Roll-Stability-Support) and premium modulator, spring-loaded parking brake system operating on two axles with controls at the rear, ALU air reservoir system. Electrical System According to the guidelines of EU standard 91/633 and 97/28, with 2 five-chamber lamps type Aspöck Europoint 3 integrated into the aluminium rear cover, 24 Volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the underrun protection. Superstructure / Tipper Body "Body fully welded inside" Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm ALU crossmembers, forklift floor load approx. 9 t/m², crossmembers closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in chamfered design, smooth rear wall in straight design with 2 ALU swing doors 50/30 mm thick, with 2 locking bars locked in a welded ALU rear frame, mounted with Teflon and Inox bearings, doors secured when open with one chain each side, reinforced wear plates on the side walls approx. 2,000x1,500x4 mm, fully welded, moving residue discharge wall with Kevlar tarp approx. 1,800 mm long plus side Kevlar tarp seals, service door in front wall with ladder folding inward. Hydraulic System "Cargo Floor" Moving Floor System Moving floor system in floor with hydraulically operated ALU profiles on ALU box section profiles with approx. 880 PE-HD sliding blocks plus anti-lifting sliding bearings, Type CF 10 mm floor version, hydraulic stroke approx. 200 mm working travel, fixed ends on front wall, separate option for connecting hydraulic lines under the vehicle with fixed couplings, line size NW 21, fixed couplings with size and type to be specified, operating pressure 190–max. 240 bar, ALU end pieces welded in moving floor, electronic controls rear left with radio control integrated in lockable waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps,

Koşul: yeni, azami yük ağırlığı: 30.050 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.664 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 52 m³, Üretim yılı: 2025, Braking System: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Disc brakes * Brake pad wear indicator (not connected) Axles: * 3 x 9 t SAF axles * 1st and 3rd axles are automatic lift axles, controlled via the EBS-E system Suspension: * Air suspension with raise/lower system (automatic lowering during tipping—can be manually locked via SmartBoard—as well as via switch on the chassis) Electrical / Lighting: * Tire pressure monitoring system (Wabco Trailerpulse) * Wabco SmartBoard * Starting aid is activated via button in the truck—without truck-side installation—as well as by pressing the brake pedal three times * 2 x 7-pin and 1 x 15-pin sockets * Aspöck LED lighting * 2 LED reversing lights (switched via reverse gear) * 1 LED work light on each side near the landing legs General Attachments: * Aluminum air tanks * Weweler crank landing gear * Side underrun protection * Foldable underrun guard with handle * Speedline Diamond aluminum rims * 1 x plastic toolbox on the left (approx. 860 x 520 x 500 mm) * Air pressure gun with 16 m hose reel in the toolbox * Closed plastic individual mudguards * 1 dust bag incl. bracket on the right side * 3 m aluminum access ladder stored on the right above the mudguards * Shovel and broom holder on the left above the mudguards * Loading pressure gauge mounted at the front of the chassis * Access steps and standing platform mounted at the front of the frame Chassis: Gsdjwgg Uzspfx Actoit * Aluminum chassis frame Tipping Body: * Aluminum rear tipper body—rectangular—with smooth side walls * Hyva hydraulic ram, 250 bar * Straight 4 mm aluminum front wall * Access steps on the inside left front wall of the body * Smooth inner and outer sidewalls * Double-walled 600 mm side wall profiles—30 mm thick—3 mm inside, 2 mm outside * Side wall profiles are continuously welded on the inside; 90° corners formed by right-angled profile between floor and side walls, enabling full utilization of loading width * Top rail 90 mm wide * 6 mm wear-resistant aluminum floor, 110 Brinell quality * Combination double-wing rear doors—straight mounted with double hinges and reinforcement profiles, each with a grain chute and all-round rubber seal * When open, doors are secured with chains, allowing them to rest almost flush against side walls * 4-point door locking hooks at the bottom, automatically released during tipping—can be pneumatically locked via lever on the frame Rollcover: * Rollcover—RAL 9005 deep black—with 3 side tensioning straps * Trapezoidal tarpaulin support, 150 mm high, at front wall and rear flap Loading Volume: * Loading volume: 51.8 m³ Fifth Wheel Height: * Fifth wheel height: 1,150 mm Information: * Body and chassis painted with acrylic paint in RAL 9005 deep black * --Technically permissible gross weight of 39,000 kg-- * New vehicle, unregistered, full manufacturer’s warranty * Errors and prior sale reserved Delivery Time: * Immediately available ex Egestorf

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2000, Stas S 3SA 334K Gisdpfx Ajydb R Rsctet Üretim yılı: 2000 3 dingilli Havalı süspansiyon Branda 2 x destek ayağı Boş ağırlık: 5.260 kg Azami toplam ağırlık: 38.000 kg = Ek Bilgiler = Boş ağırlık: 5.260 kg

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, renk: gri, Üretim yılı: 2000, Stas S 3SA 334K Üretim yılı: 2000 3 akslı Havali süspansiyon Branda Gijdpoyda Tdefx Actet 2 adet destek Boş ağırlık: 5.260 kg Azami yüklü ağırlık: 38.000 kg = Ek bilgiler = Boş ağırlık: 5.260 kg Taşıma kapasitesi: 32.740 kg Azami yüklü ağırlık: 38.000 kg

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2001, Stas S3 SA334K Üretim yılı: 2001 3 dingil Havalı süspansiyon Branda 2 x destek Boş ağırlık: 5.260 kg Giedoyda E Hopfx Actjt Azami toplam ağırlık: 39.000 kg = Ek bilgiler = Boş ağırlık: 5.260 kg Yük kapasitesi: 33.740 kg Azami yüklü ağırlık: 39.000 kg

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, renk: gri, Üretim yılı: 2008, Donanım: ABS, Stas S 339 CX Üretim yılı: 2008 Havalı süspansiyon 3 dingil Branda 2 x destek ayağı Yarım daire damper = Ek Bilgiler = Gisdpfx Acsydavxstot Boş ağırlık: 6.800 kg Yük kapasitesi: 32.200 kg Azami toplam ağırlık: 39.000 kg

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2008, Stas S 339 CX Model yılı: 2008 3 dingil Havalı süspansiyon Gedpsyc U Uaefx Acteit Branda 2 x destek ayağı Boş ağırlık: 4.890 kg Azami toplam ağırlık: 39.000 kg = Daha fazla bilgi = Boş ağırlık: 4.890 kg Yük kapasitesi: 34.110 kg Azami toplam ağırlık: 39.000 kg

Koşul: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 40 m³, Donanım: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle with lift, starting aid and electric actuation, raise/lower valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires mounted on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gear with single-sided operation, brake system according to E.E.C. standard, dual-line Westinghouse system, spring brakes acting on two axles, EBS electronic braking system from Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system per Road Traffic Licensing Regulations (StVZO) with two Aspöck five-chamber lights, 24-volt system, aluminum tipper body, hydraulics by Edbro incl. approx. 2 m hydraulic hose, 6 PVC mudguards with rubber splash flaps, side underrun protection, rear underrun protection, catwalk on the frame, fully welded, LL rubber gasket, spindle locks on the rear door, prepared for vibrating plate installation, mud-proofed! Gedpfxju Dvw Ej Actjit ADDITIONAL EQUIPMENT AVAILABLE ON REQUEST COLOR FREELY CHOICEABLE +590¤ delivery charge *Pictures and offers are subject to change*

Koşul: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 56 m³, Donanım: ABS, Chassis light version In aluminium (15-6-12) Two fully-automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and Suspension 430 mm disc brakes Jost (formerly Mercedes DCA) axle assemblies, 3 x 9 t with air suspension, centrally mounted air bellows aligned to the longitudinal beams, first axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, raise-lower valve, BVA brake wear indicator Tyres and Wheels 6 wheels with tyres size 385/65 R22.5 from leading manufacturers (manufacturer's choice), steel rims 11.75 x 22.5 ET 120 Landing Legs Mechanical design, single-sided operation, 2-speed, pivoting foot for air suspension Brake System According to E.G. standards, dual-line Wabco system, spring-loaded parking brakes acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System) and Premium Modulator, Wabco Smartboard Infocenter, aluminium air tank system Electrical System According to StVZO guidelines with 2 Aspöck Ecopoint 2 five-chamber lights, 24 Volt system with 2x 7-pin and 1x 5-pin socket, with side marker lights, 2 separate LED reversing lamps at rear, 1 LED headlight inside Tipping Body/Body Full Interior Welding Aluminium tipping body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide fully welded, floor 8 mm high-wear alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as universal door in straight design with 2-leaf doors (2/3-1/3 split) and one grain chute (alternatively 1/2-1/2 split, each with a grain chute), aluminium round profile welded to seal the door gap on sides and bottom of rear doors, rear doors partially smooth-panelled in aluminium, universal door operation automatic pneumatic with separate lockable lever, rear canopy in ALU, pivotable, two hold-downs with rubber stops attached to tipping body frame at front wall Gjdsfi Nmuopfx Actsit Hydraulic System Tipping Cylinder with Large Casing Hydraulic cylinder front-mounted, max. working pressure 150 bar, manufacturer Edbro, approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flaps across entire vehicle width attached to underrun protection, ALU spare wheel holder, right side underrun protection foldable, large toolbox Type 860, approx. 3 m aluminium ladder, 3 centre-pivot ALU hoops raised by approx. 150 mm, additional central hoop mount to hold up to 2 hoops for larger loading width, roll tarp with central light strip and separate reinforcement at wear areas, approx. 660 g/m² quality with roll tarp system, circumferential rubber cord at rear tarp edge with two hooks at rear pivot hoop, catwalk on frame in chassis colour, tarp closure with quick-release fastener, rear tarp end welded-in rubber seal against water ingress, robust foldable underrun guard with two optional towing eyes left & right incl. safety pins, 2 'Clear-Pass' spray flaps at mudguards (EG standard), ALU grain funnel with plan sack mounted on frame side, holders for shovel, broom and scraper mounted above axles, etc. + €590 delivery charge Available in 50m³ – 56m³ Load compartment length: 9,700 mm and 10,500 mm * Price varies depending on equipment

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 87 m³, Chassis Manufactured using self-supporting aluminum construction with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregate chassis made of aluminum, 140 mm frame height (max. 39 t), axles and suspension with disc brakes 22.5”, Jost axle units 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle can be lifted separately with start-assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 (manufacturer’s choice) on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel version + approx. 120 kg). Landing gears Aluminum drop leg landing gears, make: Alu-Leg, 2 x 10 t support load, for air suspension we use swivel feet. Brake system According to E.E.C. standard, dual-line brake system, Wabco EBS E-System with RSS (Roll Stability Support), spring-actuated parking brake acting on two axles with control at the rear, aluminum air reservoirs, premium modulator. Electrical system According to StVZO regulations, with two five-chamber lights type Aspöck Europoint III integrated into the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin sockets, with LED side marker lights, 2 work headlights at the rear, 2 LED work headlights at the sides at the height of the landing gears, 1 LED work headlight inside front left operable from outside. Body/tipper body — "Body fully welded inside" Bulkhead load 17,250 daN, rear and side walls 10,250 / 13,400 daN, aluminum tipper body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, fully welded with bottom and top chords, plank profiles fully welded inside! Floor as moving floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 7 t/m², closely spaced crossmembers (approx. 350 mm), aluminum bulkhead with 600 mm plank profile, 2-3 mm thick in straight design, special aluminum corner profiles in chamfered design, smooth rear wall in straight design with 2 aluminum swing doors 50/30 mm thick with 4 locking bars, fitted in a welded aluminum rear frame, mounted on Teflon and stainless steel bearings, traveling aluminum wall suspended from reinforced upper aluminum chord with "Kevlar tarp" for complete emptying, lateral brush sealing and additional Kevlar tarp at the sides, integrated discharge funnel with foldable cover plate at the rear left floor edge and operable from outside, inspection window at rear left, one sampling slider per rear door (total 2), service door on left in bulkhead. Godpfx Aogcw Rijctjit Hydraulic system "Cargo Floor" 24 board system — smooth version! Moving floor system in the base with hydraulically driven aluminum profiles on aluminum box profiles, fitted with approx. 880 PE-HD slide elements, approx. 8 mm floor thickness, hydraulic system with approx. 200 mm working stroke, fixed halves at bulkhead, separate possibility for connection of hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves to be specified in size and design, operating pressure 190–max. 240 bar, aluminum end pieces welded into the floor, actuation at the rear left with cable remote in a lockable waterproof box, without hydraulic hoses. Accessories PVC fenders with rubber splash guards, aluminum spare wheel holder, foldable aluminum side underrun protection, 1

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.880 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 47 m³, Donanım: ABS, Tipping semi-trailer with ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3x9 t axles with air suspension, 1st axle lift with starting aid and electric activation, raising and lowering valve for air suspension, Wabco SmartBoard, brake wear indicator, 6 wheels with 385/65 R22.5 size tires mounted on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gears with single-sided operation, braking system compliant with EEC standards, dual-circuit system, spring actuators operating on two axles, and Wabco EBS electronic system with RSS (Roll Stability Support), aluminum air tank, electrical system in accordance with StVZO with 2 Aspöck five-chamber tail lights, 24 volt system, aluminum tipping body, Edbro hydraulic system with about 2 m hydraulic hose, 6 PVC mudguards with rubber splash guards, lateral underrun and side impact protection, catwalk on the chassis, fully welded, long-life rubber seals, spindle locks on the rear door, body optionally also available mud-tight! Combination tail door split 2/3–1/3 with grain slider and automatic pneumatic locking. Giedpfx Acsu Dvw Sotet ADDITIONAL EQUIPMENT AVAILABLE ON REQUEST COLOR OPTION FREELY SELECTABLE +590€ transfer costs Also available in models Z9–Z13 *Pictures and offers are non-binding*

Koşul: yeni, azami yük ağırlığı: 28.840 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.660 mm, yükleme alanı genişliği: 2.250 mm, yükleme alanı yüksekliği: 2.350 mm, yükleme alanı hacmi: 50 m³, Donanım: ABS, Example: STRONG & LIGHT, now also available for heavy-duty applications, starting from 40 m³ loading volume and 6,600 kg. STRONG & LIGHT, now also available for heavy-duty applications, from 40m³ loading volume and 6,600kg ----Example: High-quality aluminium chassis with high-strength steel body, ACTUAL WEIGHT 7,160 KG, Chassis with 3x9t DCA axles, equipped with 430mm disc brakes, 6x steel rims, 1st axle as lift axle with starting aid, aluminium drop-leg supports (can be uncoupled when loaded), foldable underrun protection, digital load pressure gauge (indicates axle load), toolbox, access ladder, Body made from HB450 steel plates, floor thickness 5mm, side walls and rear doors made from 4mm HB450 steel sheets, swing doors (split 1/2 - 1/2) with grain chute on the right, remote unlock for rear doors, doors sealed with round steel (alternative rubber seal available – mud-tight), rolling tarpaulin with central pipe, aluminium fender to protect the roof tarpaulin during loading, platform mounted on the frame, EdBro tipping cylinder with long sleeve, loading height = 3,650mm. (Some vehicles shown include special equipment options) ----For further equipment details and a detailed vehicle offer, please contact us. Various loading volumes, vehicle lengths and heights available. Paintwork and equipment specifications as per customer's requirements +500¤ delivery costs Giedshfiqcepfx Actjt All offers and images subject to change.

Koşul: ikinci el, boş ağırlık: 11.245 kg, toplam ağırlık: 36.000 kg, Üretim yılı: 2009, Donanım: ABS, STAS/ALU/TIPPER Year of manufacture: 10/2009 2 axles Gross weight: 36,000 kg Unladen weight: 11,245 kg ABS Gsdpfxevdrt Sj Actsit

Koşul: ikinci el, kilometre: 867.000 km, güç: 324 kW (440,52 bg), ilk tescil: 06/2012, yakıt türü: dizel, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, renk: sarı, vites türü: mekanik, Üretim yılı: 2012, Donanım: elektronik denge programı (ESP), klima, MAN TGX 18.440 ÇEKİCİ + VİNÇ + UZAKTAN KUMANDA / 4x2 İthal / HASARSIZ Gsdpfxey R Ihqo Actjit İYİ DURUMDA! • ÜRETİM YILI: 2012 • KİLOMETRE: 867.000 km DONANIM: • ABS • ASR (Çekiş Kontrol Sistemi) • Hidrolik Direksiyon • Elektrikli Camlar • Elektrikli Aynalar • Motor Freni • Takograf • Klima AZAMİ YÜK AĞIRLIĞI: 18.000 kg DİNGİL MESAFESİ: 420 cm LASTİK EBATI: 385/65R22,5 SÜSPANSİYON: ÖN: YAY ARKA: HAVALI VİNÇ: PALFINGER PK 34002 - SH G + UZAKTAN KUMANDA TEL: *KUBA - POLSKA, İNGİLİZCE, ALMANCA, İTALYANCA *SEBASTIAN - POLSKA, ALMANCA, İTALYANCA, ????? *LASZLO - MACARCA *COSTEL - ROMENCE (Romence: Tüm ihracat işlemleri ve plakalar dahil yapılır) *RADEK - ????? Ref. No: 7735

Koşul: ikinci el, kilometre: 867.000 km, güç: 324 kW (440,52 bg), ilk tescil: 06/2012, yakıt türü: dizel, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, renk: sarı, vites türü: mekanik, Üretim yılı: 2012, Donanım: ABS, park ısıtıcısı, vinç, MAN TGX 18.440 ÇEKİCİ + VİNÇ + UZAKTAN KUMANDA / 4x2 İthal / KAZASIZ İYİ DURUMDA! ? ÜRETİM YILI: 2012 ? KİLOMETRE: 867.000 km DONANIM: ? ABS ? ASR ? HİDROLİK DİREKSİYON ? ELEKTRİKLİ CAMLAR ? ELEKTRİKLİ AYNALAR ? MOTOR FRENİ ? TAKOGRAF ? KLİMA TOPLAM AĞIRLIK: 18.000 kg DİNGİL ARALIĞI: 420 cm LASTİK EBADI: 385/65R22,5 Gjdpfjy R Ihkox Actoit SÜSPANSİYON: ÖN: YAYLI ARKA: HAVALI VİNÇ: PALFINGER PK 34002 - SH G + UZAKTAN KUMANDA TEL: * KUBA – POLONYA, İNGİLİZCE, ALMANCA, İTALYANCA * SEBASTIAN – POLONYA, ALMANCA, İTALYANCA, ???? * LASZLO – MACARCA * COSTEL – ROMENCE (Tüm ihracat işlemlerini Romence olarak yapıyoruz, dahil plaka) RADEK – ???? Ref. no: 7735

Koşul: ikinci el, kilometre: 324.000 km, güç: 302 kW (410,61 bg), ilk tescil: 09/2016, yakıt türü: dizel, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 3 aks, renk: beyaz, vites türü: otomatik, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 850 mm, Üretim yılı: 2016, Donanım: ABS, klima, vinç, SCANIA P 410 / 8x4 PLATFORM 7,30 m + VİNÇ + UZAKTAN KUMANDA Kazası Yok İyi Durumda! ? ÜRETİM YILI: 2016 ? KM: 324.000 km DONANIM: ? ABS ? ELEKTRİKLİ CAMLAR ? ELEKTRİKLİ AYNALAR ? DİREKSİYON SERTLEŞTİRME (HİDROLİK DİREKSİYON) ? TAKOGRAF ? KLİMA PLATFORM: 730 x 247 x 85 cm (U x G x Y) TAŞIMA KAPASİTESİ: 16.000 kg TOPLAM AĞIRLIK: 32.000 kg LASTİK EBATI: 315/80R22,5 DİNGİL MESAFESİ: 195/380/135 cm SÜSPANSİYON: ÖN: YAYLI ARKA: HAVALI VİNÇ: PALFINGER PK 34002 - SH F + UZAKTAN KUMANDA TEL: KUBA – POLONYA, İNGİLİZCE, ALMANCA, İTALYANCA SEBASTIAN – POLONYA, ALMANCA, İTALYANCA, ????? LASZLO – MACARCA COSTEL – ROMENCE Giodpfx Aey Rwp Rsctet (Romence tüm ihracat işlemlerini dahil numaralar da yapıyoruz) RADEK – ????? Ref. no: 9542