Damperli yarı römorkSTAS
51,8 m³ Voll- ALU- Mulde, 5,95 to. LG, Kombikl.
Damperli yarı römork
STAS
51,8 m³ Voll- ALU- Mulde, 5,95 to. LG, Kombikl.
sabit fiyat KDV hariç
€62.900
(€74.851 brüt)
Üretim yılı
2025
Durumu
Yeni
Konum
Egestorf 

Resimleri göster
Haritayı göster
Temel veriler
Fiyat ve Konum
sabit fiyat KDV hariç
€62.900
(€74.851 brüt)
- Satıcının konumu:
- Eichenstich 12, 21272 Egestorf, Almanya

Ara
Teknik detaylar
- Azami yük ağırlığı:
- 30.050 kg
- Toplam ağırlık:
- 36.000 kg
- Dingil konfigürasyonu:
- 3 dingil
- Yükleme alanı uzunluğu:
- 9.664 mm
- Yükleme alanı genişliği:
- 2.475 mm
- Yükleme alanı yüksekliği:
- 2.165 mm
- Yükleme alanı hacmi:
- 52 m³
Teklif detayları
- Listeleme kimliği:
- A190-44-341
- Referans no.:
- 6293
- Son güncelleme tarihi:
- 24.07.2025
Açıklama
* Wabco EBS-E (electronic braking system with RSS)
* Emergency release device for spring brake cylinders
* Disc brakes
* Brake pad wear indicator (not connected)
Bdedpowgg Uzefx Adtji
* Tyre pressure monitoring system (Wabco Trailerpulse)
* Wabco Smart-Board
* 3 x 9 t SAF axles
* Air suspension with lift and lowering system (automatic lowering during tipping operation - can be manually locked via SmartBoard and via switch on the chassis)
* 1st and 3rd axles are automatic lift axles, controlled through the EBS-E system
* Starting aid activated via button in the truck—does not require installation on the truck side—and also by threefold operation of the brake pedal
* Aluminium air reservoir
* Weweler crank landing gear
* Side underrun protection
* Foldable underrun guard with handle
* 2 x 7-pin and 1 x 15-pin sockets
* Aspöck LED lighting
* 2 LED reversing lights (activated via reverse gear)
* One LED work light each next to the landing gears on both sides
* Speedline Diamond aluminium rims
* One plastic toolbox approx. 860 x 520 x 500 mm on the left side
* Compressed air gun with 16-m hose reel in the toolbox
* Enclosed plastic single mudguards
* One dust bag with bracket, mounted on the right side
* 3 m aluminium ladder stored on the right above the mudguards
* Shovel and broom holder above the mudguards on the left
* Load pressure gauge mounted at the front of the chassis
* Aluminium chassis frame
* Rectangular aluminium rear tipping body with smooth sidewalls
* Hyva hydraulic ram, 250 bar
* Straight 4 mm aluminium front wall
* Climbing steps inside the body on the left at the front wall
* Smooth sidewalls inside and outside
* Double-walled 600 mm sidewall profiles – 30 mm thick – 3 mm inside, 2 mm outside
* Sidewall profiles are continuously welded inside; 90° corners realised with a right-angled profile between floor and sidewalls — this allows maximum floor width utilisation
* Top rail 90 mm wide
* 6 mm wear-resistant aluminium floor, 110 Brinell quality
* Combination double-wing doors set vertically with double hinges and reinforcement profiles, each with one grain hatch and all-round rubber seal
* When doors are open, they are secured with chains—doors lie as flat as possible against the sidewalls
* 4-way lower door latches are automatically released during tipping — pneumatically lockable using a valve on the frame
* Roll tarp — RAL 9005 deep black — with three tension belts on the side
* Trapezoidal tarpaulin support, 150 mm high, fitted on the front wall and rear flap
* Access ladder and standing platform mounted at the front of the frame
* Loading volume 51.8 m³
* Body and chassis coated with acrylic paint in RAL 9005 deep black
* --Permissible gross weight of 39,000 kg technically possible--
* Saddle height 1,150 mm
* New vehicle, unregistered, with manufacturer's warranty
* Subject to prior sale and errors excepted
* Immediately available from Egestorf
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
* Emergency release device for spring brake cylinders
* Disc brakes
* Brake pad wear indicator (not connected)
Bdedpowgg Uzefx Adtji
* Tyre pressure monitoring system (Wabco Trailerpulse)
* Wabco Smart-Board
* 3 x 9 t SAF axles
* Air suspension with lift and lowering system (automatic lowering during tipping operation - can be manually locked via SmartBoard and via switch on the chassis)
* 1st and 3rd axles are automatic lift axles, controlled through the EBS-E system
* Starting aid activated via button in the truck—does not require installation on the truck side—and also by threefold operation of the brake pedal
* Aluminium air reservoir
* Weweler crank landing gear
* Side underrun protection
* Foldable underrun guard with handle
* 2 x 7-pin and 1 x 15-pin sockets
* Aspöck LED lighting
* 2 LED reversing lights (activated via reverse gear)
* One LED work light each next to the landing gears on both sides
* Speedline Diamond aluminium rims
* One plastic toolbox approx. 860 x 520 x 500 mm on the left side
* Compressed air gun with 16-m hose reel in the toolbox
* Enclosed plastic single mudguards
* One dust bag with bracket, mounted on the right side
* 3 m aluminium ladder stored on the right above the mudguards
* Shovel and broom holder above the mudguards on the left
* Load pressure gauge mounted at the front of the chassis
* Aluminium chassis frame
* Rectangular aluminium rear tipping body with smooth sidewalls
* Hyva hydraulic ram, 250 bar
* Straight 4 mm aluminium front wall
* Climbing steps inside the body on the left at the front wall
* Smooth sidewalls inside and outside
* Double-walled 600 mm sidewall profiles – 30 mm thick – 3 mm inside, 2 mm outside
* Sidewall profiles are continuously welded inside; 90° corners realised with a right-angled profile between floor and sidewalls — this allows maximum floor width utilisation
* Top rail 90 mm wide
* 6 mm wear-resistant aluminium floor, 110 Brinell quality
* Combination double-wing doors set vertically with double hinges and reinforcement profiles, each with one grain hatch and all-round rubber seal
* When doors are open, they are secured with chains—doors lie as flat as possible against the sidewalls
* 4-way lower door latches are automatically released during tipping — pneumatically lockable using a valve on the frame
* Roll tarp — RAL 9005 deep black — with three tension belts on the side
* Trapezoidal tarpaulin support, 150 mm high, fitted on the front wall and rear flap
* Access ladder and standing platform mounted at the front of the frame
* Loading volume 51.8 m³
* Body and chassis coated with acrylic paint in RAL 9005 deep black
* --Permissible gross weight of 39,000 kg technically possible--
* Saddle height 1,150 mm
* New vehicle, unregistered, with manufacturer's warranty
* Subject to prior sale and errors excepted
* Immediately available from Egestorf
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2001
İstek gönder
Telefon & Faks
+49 40 33... ilanlar
İlanınız başarıyla silindi
Bir hata oluştu












































