Kullanılmış Fruehauf Tf34C13Raa Plateau satın al (330)

Koşul: ikinci el, azami yük ağırlığı: 25.660 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2022, Üretim yılı: 2022, Donanım: ABS, Schwarzmüller RH240 Jumbo Flatbed Low Loader Semi-Trailer, Day Registration Extendable and telescopic – for transport of construction materials and construction machinery – Condition: as new – GVW 36,000 kg Unladen weight 10,340 kg Internal length approx. 13,570 mm = Front platform length approx. 3,950 mm Rear platform length approx. 9,620 mm Platform width at the lower deck approx. 2,540 mm Loading height in the well (unloaded) approx. 830 mm Frame: Extendable central frame welded construction Extension length 6,000 mm Pneumatically lockable, actuated on the trailer + additional position for 40ft container in the well Reinforced version for building material transport, rated for 20 t over 5 m at the center of gravity and for construction machinery up to 20 t Frame suitable for transporting timber components L/W/H approx. 13,000/575/3,200 mm Reinforced frame for point loads at front and rear with bearing block Reinforced outer frame on gooseneck platform 6 mm Reinforced outer frame in the well 6 mm Tapered cross members Sliding intermediate support approx. 300 mm (non-removable), mechanically lockable, designed as stanchion cross member for box section stanchions 80x80 mm; also 1 pair of 5 t lashing rings integrated into the intermediate support externally Frame suitable for 2-axle tractor units, fifth wheel height (unloaded) approx. 960 mm – 1,020 mm with air suspension At the front, 3 pairs and at the rear, 10 pairs of 10 t lashing rings extendable from the outer frame, on both sides, can also be folded outward for overwidth securing 10 pairs of lashing mushrooms with welded round steel at the lower outer frame Frame attachments: 10 pairs of plug-in holders with reinforcement beams for box section stanchions 80x80 mm, on both sides of outer frame 6 stanchion cross members for box section stanchions 80x80 mm 24 steel box-segment stanchions 80x80x5 mm, usable height approx. 2,000 mm, with lashing holes at top for tie-down straps, hot-dip galvanized 3 pairs of container locks in the low bed platform, retractable, for: 1 x 20ft container 1 x 30ft container 1 x 40ft container (when extended) U-profile rail for loading ramps at frame end Support equipment: Mechanical steel support winches, 2 x 12 t 2 drop-down supports, both sides at rear of frame Wheels: Tires 205/65 R 17.5 Steel rims 6.00 x 17.5 Axles: SAF low loader axles with drum brakes Axle lift on 1st axle Axle distance 1,310 + 1,410 mm Steered trailing SAF axle, approx. 20° steering angle, electro-pneumatic reverse lock, automatically engaged in reverse gear Last axle is steered trailing axle Braking system/Suspension: Wabco branded brake system Brake/air connections with 2 single coupling heads yellow/red, EBS/ABS socket at front Air suspension with lift/lower feature, total stroke approx. 200 mm Automatic adjustment to programmed ride height above 15 km/h Assistance/Safety Systems: Standard reporting interval Every 15 minutes when ignition is on Every 24 hours when ignition is off Axle load display via EBS CAN bus signal for display in truck cab (truck must be pre-equipped) SmartBoard by Wabco for data readout via display (kilometers, axle group load, brake diagnostics, etc.) Floor: 35 mm larch wood floor, double-sided impregnated, longitudinally laid with small gaps, with steel chequer plate covers over the wheels Bdodpfx Aju A Nhnsh Ssb Front wall: Fixed profiled steel front wall, approx. 2,700 mm high with 2 central supports 2 front corner posts, integrated into the front wa

Koşul: ikinci el, azami yük ağırlığı: 17.700 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/1994, yükleme alanı uzunluğu: 9.400 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 950 mm, toplam genişlik: 2.480 mm, Toplam uzunluk: 11.850 mm Yükleme uzunluğu: 9.400 mm (arka eğim dahil) Genişlik: 2.480 mm Yükleme yüksekliği: 950 mm Diğer bilgiler - 40 km/sa - Hidrolik rampalar - Dış şaside sabitleme halkaları - Geniş sabitleme paketi - Payanda cepleri Bdedpfx Ahoy Hn Ebe Seb - İkiz lastikler

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 3 kg, azami yük ağırlığı: 8 kg, toplam ağırlık: 11 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, The images are archive images. Further Information: Chassis Central Axle Trailer Fine-grained steel welded construction Outer frame slightly sloped with Load-Lock profile for lashing strap attachment Note: To attach the straps in combination with side walls, the side walls must be opened! Gear support leg at the front Foldable rear support 2 wheel chocks with holders Galvanized steel underrun protection Quarter-shell mudguards 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with a padlock (padlock not included) 1 storage compartment for plug-in stakes, open, below loading area 4 pairs of stake pockets recessed in the outer frame, internal dimensions 83 x 83 mm 4 stake pockets centrally embedded in the floor, reinforced to the main frame, 83 x 83 mm internal dimensions 6 pairs of plug-in stakes B=80/ D=80/ L=2000 mm, hot-dip galvanized Note: Stake pockets / plug-in stakes are not intended for the sole securing of long goods, pipes, etc. without lashing around them Drawbar Equipment Tandem Trailer Drawbar with certified 40 mm towing eye Drawbar mechanically length-adjustable by 4 x 500 mm from 1800 - 3800 mm, drawbar set to 1800 mm, (Note: Observe load distribution and support load) Axles + Suspension GFA axles with tapered roller bearings and S-cam brakes Bdodpoi Ri H Defx Ah Ssb Axles / chassis laser aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load compensation (rocker compensation) Wheels & Tyres 235 / 75 R 17.5, manufacturer’s choice Steel rims, factory silver Braking System 2-line compressed air brake system Spring-loaded parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting lines to the truck, ABS and ALB, with ABS connector at the front and connection cable Attention: The trailer may only be towed by towing vehicles that ensure effective ABS operation! Electrics 24 Volts, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red outline marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cables Floor Phenolic coated plywood panels approx. 30 mm thick, for high point load capacity Note: Floor deformation due to weather conditions possible! Platform length approx. 6,200 mm Operating Instructions The stated total weight is technically possible; depending on the cargo, the total weight may not be achievable while observing the permissible axle, support and kingpin loads. Registration / Plates Country of registration: Germany With Dekra approval and report 24/7 service hotline Prepared for single-line license plate holders Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paint Frame DB 7350 Nova Grey Attention: Archive images!

Koşul: ikinci el, boş ağırlık: 1 kg, azami yük ağırlığı: 15.999 kg, toplam ağırlık: 16.000 kg, ilk tescil: 01/2023, renk: kırmızı, Üretim yılı: 2023, şoför kabini: gündüz kabini, emisyon sınıfı: hiçbiri, Donanım: kamyon kaydı, Reference number for inquiries: 69311 Krone, swap body / container * Year of manufacture: 2023 * 7.45 m * Rail-transportable - craneable * Miscellaneous, other * Gross weight: 16,000 kg * Tare weight: 1 kg Bjdjyib Azopfx Ah Sjdb * Payload: 15,999 kg * Permissible total weight: 16,000 kg * Corner fitting dimensions E=5,853 mm * Overhang dimensions: 799 mm * Support height: 1,120 mm * Krone swap body type 745 platform, loading area 7,300 mm x 2,480 mm Disclaimer: Specifications subject to change, prior sale, and errors excepted. More photos and videos available on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Processing of all (export) documents * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, graphics, paintwork, etc. * Professional loading / load securing * TÜV inspections and registration service * Transport of commercial vehicles Contact our trained specialist staff – we are happy to advise you.

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 12/1993, toplam uzunluk: 13.600 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 2.850 mm, süspansiyon: hava, lastik boyutu: 385 / 65 / R22.5, dingil mesafesi: 8.810 mm, renk: kırmızı, Üretim yılı: 1993, General Information Model code: ## Axle Configuration Tyre size: 385 / 65 / R22.5 Axle brand: ROR Bodpfxey Hvlcs Ah Ssdb Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Weights Unladen weight: 7,600 kg Payload: 31,400 kg Gross vehicle weight (GVW): 39,000 kg Functional Body manufacturer: Groenewegen Curtain Sider / Flatbed Maintenance APK (Technical Inspection): valid until 07/2026 Condition General condition: average Technical condition: average Visual appearance: average Product Safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Koşul: ikinci el, boş ağırlık: 6.540 kg, azami yük ağırlığı: 32.460 kg, toplam ağırlık: 39.000 kg, ilk tescil: 04/2015, bir sonraki muayene (TÜV): 08/2025, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı hacmi: 91 m³, süspansiyon: hava, lastik boyutu: 385/55 R22.5, renk: siyah, vites türü: diğer, ön lastik ölçüsü: 385/55 R22.5, arka lastik boyutu: 385/55 R22.5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, aydınlatma, basınçlı hava freni, ek farlar, kamyon kaydı, sisal lambaları, şasi, Kögel 3 Dingilli İnşaat Platform Yarı Römorku * Kaldırılabilir dingil * 24 EURO palet için palet kutusu * Delikli dış şasi * Havalı süspansiyon (kaldır/indir) * Disk frenler * BPW dingiller * ABS, EBS, ALB, LSV, CDF * Geri vites lambası * Lastikler: 385/55 R22.5 (%%30-50) * Arkada 2 çift plastik çamurluk ve su sıçrama siperliği * İç ölçüler: U- 13,62 m, G- 2,48 m * Ağırlıklar: AZM- 39.000 kg, BOS- 6.540 kg, YK- 32.460 kg * Alman aracı ve Alman evrakları!! * 1. el!! * İlk tescil: 09.04.2015 * Muayene (TÜV) 08/2025’e kadar --> YENİ MÜMKÜN * SP 04/2026'ya kadar * Şasi No: WK0S0002400178283 Ara satış, hata ve değişiklik hakkı saklıdır! Bdodjy A Eybspfx Ah Sob Fotoğraflarda firma logoları kısmen kaldırılmıştır - lütfen sorunuz! Ekstra donanımların işlevselliği garanti edilmez! İrtibat kişiniz: Marcel Schwämmle Tel. + WhatsApp:

Koşul: iyi (kullanılmış), dingil konfigürasyonu: 2 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, ilk tescil: 10/2008, süspansiyon: hava, lastik boyutu: 445/45/19.5, dingil mesafesi: 5.200 mm, renk: siyah, Üretim yılı: 2008, Krone AZ BDF platformlu römork, BPW akslar, Alman tescili, geçerli muayenesi Bdedpfxswwtgrj Ah Sjb = Daha Fazla Bilgi = Aks konfigürasyonu Lastik ölçüsü: 445/45/19,5 Aks markası: BPW Süspansiyon: Havalı süspansiyon Ön aks: Maks. aks yükü: 9.000 kg; Yönlendirmeli; Sol lastik dişi: %60; Sağ lastik dişi: %60 Arka aks: Maks. aks yükü: 9.000 kg; Sol lastik dişi: %60; Sağ lastik dişi: %60 Ağırlıklar Boş ağırlık: 2.870 kg Yük kapasitesi: 15.130 kg Azami toplam ağırlık: 18.000 kg Fonksiyonel Yükleme platformu yüksekliği: 135 cm Durum Teknik durumu: iyi Görsel durumu: iyi Daha fazla bilgi Daha fazla bilgi için lütfen Gerrit Haverhoek ile iletişime geçiniz.

Koşul: ikinci el, ilk tescil: 03/2002, bir sonraki muayene (TÜV): 03/2027, Donanım: ABS, Yalnızca ihracat için Bsdpfey Dmq Dex Ah Sjdb Satış sadece yurtdışına SPR 324 Kotschenreuther 3 dingil

Koşul: ikinci el, makine/araç numarası: WFDFLT21801003760, boş ağırlık: 4.480 kg, azami yük ağırlığı: 13.520 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2014, lastik boyutu: 445/45 r19,5, Üretim yılı: 2014, Further Information Bodpjni Udzjfx Ah Ssdb Fine-grain steel welded construction 1 front gearbox support leg, with straight base and single-sided operation on the right in the direction of travel Wheel chocks with holder, aluminium side underrun protection, steel rear underrun protection Half-shell mudguards slightly protruding above the main frame, rear impact bumper Tandem trailer coupling device Drawbar with certified 50 mm towing eye, forwarding version, underslung drawbar Axles & Suspension BPW disc brake axles, manufacturer’s choice Air suspension with lift & lower valve Wheels and Tyres 445 / 45 R 19.5, manufacturer’s choice, steel rims in factory silver Brake System 2-line compressed air braking system Spring-loaded parking brake, Duomatic coupling in front, with connecting line to the towing vehicle, EBS, electronic braking system with EBS plug at the front, with connection cable Brand: Haldex Note: The trailer may only be towed by towing vehicles that ensure the ABS functions correctly! Floor: Platform length approx. 7,300 mm, anti-slip plywood floor Front wall: aluminium approx. 1,200 mm, corner posts in high-volume steel design Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 1 x 15-pin socket at the front with connecting cable Approval / License Plates Country of approval: Germany, with Dekra inspection and certificate 24/7 service hotline, prepared for single-line number plate holder, contour marking with reflective tape in accordance with ECE R 048, white on the sides and red at the rear.

Koşul: yeni, boş ağırlık: 5.467 kg, azami yük ağırlığı: 33.533 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.480 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5, Üretim yılı: 2026, Donanım: ABS, Boş ağırlık: 5467 kg, azami toplam ağırlık: 39.000 kg, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.480 mm. Lastik ebadı: 385/65 R22.5, 1. aks: , 2. aks: , 3. aks: , havalı süspansiyon, alt koruma, ön kaldırılabilir aks, elektronik fren sistemi (EBS), alet kutusu, cıvatalı şasi, 1x15 ve 2x7 kutuplu bağlantı fişi, antisprey, lastik basınç kontrolü, tampon koruma. Tüm araç tekliflerimizi web sitemizde bulabilirsiniz. Finansman mı istiyorsunuz? Value Added Service hizmetimiz ile size özel finansman seçenekleri, tam servis ve telematik hizmetleri sunuyoruz. Size memnuniyetle danışmanlık yaparız. Bdsdpfx Asy A U E Teh Sjb

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2006, yükleme alanı uzunluğu: 13.450 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 1.620 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5, dingil mesafesi: 1.320 mm, Üretim yılı: 2006, Tyre size: 385/65R22.5 Suspension: Air suspension Drive: Wheel drive Bdjdpfoy Ewvmox Ah Ssb Unladen weight: 6,140 kg Payload: 32,860 kg Gross vehicle weight (GVW): 39,000 kg Body manufacturer: KRONE

Koşul: iyi (kullanılmış), kilometre: 293.139 km, güç: 177 kW (240,65 bg), ilk tescil: 05/2011, yakıt türü: dizel, lastik boyutu: 285/70 R19.5, lastik durumu: 80 yüzde, dingil konfigürasyonu: 4x2, dingil mesafesi: 5.600 mm, yakıt: dizel, renk: diğer, şoför kabini: gündüz kabini, vites sayısı: 6, emisyon sınıfı: Euro 5, süspansiyon: çelik-hava, koltuk sayısı: 2, izin verilen dingil yükü (dingil 1): 5.800 kg, izin verilen dingil yükü (dingil 2): 10.900 kg, Üretim yılı: 2011, Donanım: ABS, diferansiyel kilidi, elektrikli ayna, elektrikli cam sistemi, sisal lambaları, vinç, = Additional Options and Equipment = - 4x2 drive - Speed limiter - Air suspension - Parabolic suspension - Radio Bdsdpoymptlsfx Ah Ssb - Beacon - Differential lock - PTO (Power Take-Off) = Notes = Crane Operating hours: 1695 hrs Number of hydraulic extensions: 4 Number of stabilizers: 2 Remote control: ✓ Load hook: ✓ Rotator: × Squeeze-Box: × Winch: × Pallet hook: × Reach: 12 m Lifting capacity: 5,360 kg = Further Information = General Information Number of doors: 2 Cabin: FL, single Technical Information Number of cylinders: 6 Engine displacement: 7,146 cc Gross vehicle weight: 16,000 kg Powertrain Engine brand: VOLVO Axle Configuration Tyre size: 285/70 R19.5 Tyre tread: 80% Front axle: Max. axle load: 5,800 kg; Steered Rear axle: Twin tyres; Differential lock; Max. axle load: 10,900 kg Functional Crane: PALFINGER PK9002EH-C (4x) + RADIO, year of manufacture 2011, mounted behind the cab Condition Technical condition: good Visual condition: good

Koşul: yeni, azami yük ağırlığı: 23.800 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Complete specification available on request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = Raised front platform including neck, corners chamfered * Approx. 5,350 mm = Low-bed platform – flat loading area Bodpfxey Aug Ro Ah Sjdb * Approx. 850 mm = Rear ramp slope * Overall width approx. 2,550 mm (or with extensions approx. 3,000 mm) * Loaded loading height approx. 870 mm * When assembling a combination, please ensure compliance with the legally permissible total height and length! Chassis: * Steel welded construction with front neck and chamfered rear * Ramp slope with excavator bucket recess in center = rear depression between main beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing rails (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, retractable approx. 10 t lashing rings (4x in the low-bed, 1x in the ramp slope, 2x on the raised platform) * Standard ball-bearing slewing ring Chassis Attachments: * Pull-out extensions with softwood planks approx. 50 mm on both sides of the low-bed platform (track width of construction machines to be transported must not exceed outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, allocation: 1 pair at front raised platform inside main beams; 1 pair at the very rear in the bucket recess left and right; 1 pair at front raised platform in front of the neck, inside main beams; 1 pair at the rear of low-bed in front of ramp slope, in the bucket recess left and right Towing Equipment: * Fixed drawbar with swivel towing eye approx. 40 + 50 mm, cranked design, silent bushing bearing, drawbar hold spring with tensioner * Truck coupling height from approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support Equipment: * 2 pcs. automatic folding rear supports Axles: * SAF air-suspension low-loader axles with drum brakes, axle load 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 12 pcs. tires 235/75 R 17.5, 141J, manufacturer according to factory selection Brake System/Suspension: * Brake system in accordance with ECE directive R13 * Two-line compressed air brake system * Manufacturer Wabco, EBS system 4S3M, 1st and 2nd axle monitored * RSS/RSP stability program * Spring-actuated parking brake on 2nd and 3rd axle * Brake/air connection lines with 2 individual couplings yellow/red * EBS/ABS connection cable * Air suspension with lifting/lowering facility (only on rear axles), automatic ride height adjustment from 15 km/h (RTR), with axle stop on front axle Assistance/Safety Systems: * SWIT – Schwarzmüller Intelligent Telematics * Axle load display via EBS CAN bus signal for display in truck cab (truck must be prepared accordingly, not a certified scale) * Tire pressure monitoring as per ECE directive 141, with pressure sensor in the wheels, for display in truck cab (display unit etc. must be available in the tractor unit) Floor: * Softwood floor approx. 50 mm, impregnated, projecting approx. 5–10 mm above frame upper edge * Steel checker plate covering above wheels Ramps: * 2 pcs. foldable single-piece lightweight steel loading ramps, length approx. 2,800 mm, width approx. 750 mm, with impregnated hardwood floor approx. 35 mm * Ramps adjustable in width from intermediate di

Koşul: yeni, azami yük ağırlığı: 30.860 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.550 mm, Donanım: ABS, Our complete vehicle inventory, including vehicles available immediately and at short notice, can be found on our website. Excerpts from the equipment list. Full equipment details available on request. Frame: * Steel welded construction with front frame drop, front corners chamfered and rear taper, drive-on ramp with centrally positioned excavator bucket recess = rear depression between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t rated lashing brackets, 7 pairs of recessed, pull-out approx. 10 t lashing rings (2x on the raised platform, 1x in the front frame drop, 3x in the lowbed between the wheel recesses and 1x in the drive-on ramp) 2 pairs of wheel recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located at the front after the frame drop including one-piece drive-over aluminium cover, for max. surface load of approx. 11,650 daN/unit * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), located between the 3rd and 4th axles, including one-piece drive-over aluminium cover, suitable for the transport of wheel loaders with a wheelbase of approx. 2,700 - 3,600 mm, with wheel diameter around 1,485 – 1,740 mm, maximum wheel loader overhang at rear 2,220 mm * Width between the wheel recesses approx. 1,255 mm (= outer edge to outer edge of longitudinal beams) Frame attachments: * 5 pairs of receptacle sockets in the outer frame for square tube stanchions approx. 100 x 50 x 5 mm (3x in the lowbed, 2x on the raised platform) * Both sides of the lowbed platform extendable widening with softwood planks approx. 50 mm (track width of construction machinery to be transported must not exceed outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, arranged: 1 pair at the front of the raised platform inside the longitudinal beams, 1 pair at the very rear in the excavator bucket recess left and right, 1 pair at the front of the raised platform before the frame drop inside the longitudinal beams, 1 pair at the rear of the lowbed before the drive-on ramp in the excavator bucket recess left and right Drawbar: * Fixed drawbar with approx. 50 mm heavy-duty towing eye, cranked version, silent bushing mount, drawbar retention spring with tensioner * Truck coupling height from approx. 775 mm to approx. 975 mm * Drawbar length approx. 1,800 mm Support system: * 2 hydraulic rear supports – individually operated, control system housed in a separate stainless steel box Axles: * SAF air suspension low-bed axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 16 tyres 245/70 R 17.5, 146/146F, make: Conti HTR2 (tyre load capacity approx. 12 t/axle) Brake system/suspension: * Brake system according to ECE directive R13 dual-line pneumatic brake system * Wabco EBS system 4S3M, 1st and 3rd axle sensor-controlled * RSS/RSP – stability program * Spring-loaded parking brake on 3rd and 4th axles * Aluminium air tanks for total weight 44 t * Brake/air hose couplings with 2 individual coupling heads yellow/red * EBS/ABS connection cable * Retaining rubber for EBS and electric connectors * Air suspension with lifting and lowering function, front and rear individually operable * Automatic adjustment to programmed ride height from 15 km/h Bedpfx Ahsy Auhnj Sedb Assistance/safety systems: * SWIT – Schwarzmüller Intelligent Telematics Floor: * Softwood flooring approx. 50 mm, impregnated,

Koşul: ikinci el, ilk tescil: 06/2008, toplam ağırlık: 39.000 kg, boş ağırlık: 6.450 kg, renk: siyah, vites türü: diğer, emisyon sınıfı: hiçbiri, Üretim yılı: 2008, azami yük ağırlığı: 32.550 kg, bir sonraki muayene (TÜV): 06/2025, süspansiyon: hava, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.500 mm, lastik boyutu: 385/65 R22.5, ön lastik ölçüsü: 385/65 R22.5, arka lastik boyutu: 385/65 R22.5, şoför kabini: diğer, Donanım: ABS, aydınlatma, basınçlı hava freni, ek farlar, elektronik denge programı (ESP), kamyon kaydı, sisal lambaları, şasi, Kögel 3 Dingilli Platform/Kasa Dorse SN 24 * Kaldırılabilir dingil * Palet kutusu * SAF dingiller * Disk frenler * Zeminde her iki tarafta 13 gömme yük bağlama halkası * Lastik ölçüsü: 385/65 R22.5 * Havalı süspansiyon (kaldırma/indirme) * İç ölçüler: U- 13,62 m, G- 2,50 m, ön duvar yüksekliği- 2,15 m * Ağırlıklar: Azami yüklü ağırlık- 39.000 kg, boş ağırlık- 6.450 kg, taşıma kapasitesi- 32.550 kg * Alman aracı ve Alman evrakları! * Orijinalinde brandalı üst yapı vardı! Bdsdpfx Ahsyyypre Sob * 1. el! * İlk tescil: 02.06.2008 * Muayene geçerlilik bitişi: 06/2025 * Yol güvenlik (SP) bitişi: 12/2025 * Şasi no: WK0S0002400102068

Koşul: ikinci el, boş ağırlık: 5.870 kg, azami yük ağırlığı: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2018, süspansiyon: hidrolik, lastik durumu: 70 yüzde, yük kapasitesi: 36.130 kg, • 1. dingil kaldırılabilir • Omega çelik zemin • Yük sabitleme halkaları Bdsdpfx Ahey Abrmo Ssb • Yedek tekerlek taşıyıcısı • Depolama kutuları

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 6.640 kg, toplam ağırlık: 40.000 kg, ilk tescil: 02/2023, yükleme alanı uzunluğu: 13.510 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 445/45 R 19,5, renk: gri, Üretim yılı: 2023, 3-Axle Mega Flatbed Semi-Trailer HeavyTrailer Gross Weight: approx. 40,000 kg Fifth Wheel Load: approx. 16,000 kg Axle Load: approx. 24,000 kg Unladen Weight: 6,640 kg Payload: 33,360 kg Length: 13,510 mm Vehicle Width: 2,540 mm Coupling Height: approx. 980 mm / 1,100 mm Loading Height (unladen): 1,080 mm / 1,200 mm Chassis - Chassis frame construction made of welded longitudinal beams and continuous crossmembers - Wide underride guard nose approx. 700 mm - 6 pairs of lashing eyes (2,000 kg lashing force), welded into the outer frame - 6 pairs of stanchion pockets (80 x 50 mm) in the outer frame - 6 pairs of stanchion pockets (80 x 50 mm) on the inside of the longitudinal beam - 2 pairs of ferry lashings, painted yellow - 6 pairs of lashing eyes (5,000 kg lashing force), welded into the outer frame - Front wall approx. 2,000 mm high with metal cladding, bolted design - Rear premium lamp panel, large and edged - Welded underride protection (rectangular tube) - Side underrun protection on both sides Landing Gear - 24 t telescopic landing gear with single-sided operation and semi-circular support plate Axles/Suspension - 3 axles at 8 t each (technically 9 t), disc brakes - Secondary ride height: Button for 2nd ride height at the bracket for raising and lowering (+ approx. 120 mm) - Air suspension, total lift approx. 300 mm - Raise and lower device with 1 rotary valve - Mounting bracket for raise/lower device, bolted design - 6 tyres 445/45 R 19.5 - Wheel mounting via centralisation Brakes - Two-line compressed air brake system according to EC Directive 71/320 - With dual-eye valve for brake and spring actuators - Test nipple for brake cylinder pressure on front right brake cylinder - One red and one yellow coupling knob - Raise/lower device mounted at rear left in direction of travel - 2 x approx. 80 l air reservoirs, steel, black painted (1x brakes, 1x raising/lowering) Lighting System - 24 Volt lighting system with large multifunction rear lights - Side marker light (LED) with reflector - Front position light, below, white, 1 pc. each left and right - 15-pin plug and socket at the front - EBS socket - Number plate lighting Floor - 28 mm hardwood floor with galvanised omega steel profiles - Hardwood floor bolted to the crossmembers - Omega profiles bolted to the front frame Painting - KTL (cathodic dip coating) with zinc phosphating plus powder coating - Chassis + front wall: MB 7350 novagrau (nova grey) Accessories - Contour marking for flatbed vehicles - Removable front wall up to 2,000 mm high with metal cladding - Holder for revolving beacon at rear - SmartBoard - ECE marking board at rear - 4x extendable warning boards - Folding and extendable access ladder at rear right - 2x wheel chocks with holder - 2 rubber impact buffers on rear corners - Rear mudguard - Plastic mudguards with anti-spray mudflaps Bdodpjv Darpefx Ah Ssb - 4 pairs of container locks with retractable twist locks, recessed into the floor, including additional crossmembers - Suitable for accommodating 1x40' and 2x20' containers - Open box made of perforated sheet metal, longitudinally in direction of travel (600 x 450 x 2,670 mm), galvanised, bolted

Koşul: iyi (kullanılmış), kilometre: 293.139 km, güç: 177 kW (240,65 bg), ilk tescil: 05/2011, yakıt türü: dizel, lastik boyutu: 285/70 R19.5, lastik durumu: 80 yüzde, dingil konfigürasyonu: 4x2, dingil mesafesi: 5.600 mm, yakıt: dizel, renk: diğer, şoför kabini: gündüz kabini, vites sayısı: 6, emisyon sınıfı: Euro 5, süspansiyon: çelik-hava, koltuk sayısı: 2, izin verilen dingil yükü (dingil 1): 5.800 kg, izin verilen dingil yükü (dingil 2): 10.900 kg, Üretim yılı: 2011, Donanım: ABS, diferansiyel kilidi, elektrikli ayna, elektrikli cam sistemi, sisal lambaları, vinç, = Further Options and Accessories = - 2 axles - 4x2 drive - Speed limiter - Air suspension - Parabolic suspension - Radio - Beacon light - Lock - PTO (power take-off) = Remarks = Crane Hours: 1695 hrs Number of hydraulic extensions: 4 Number of outriggers: 2 Remote control: ✓ Load hook: ✓ Rotator: × Squeeze box: × Winch: × Pallet fork: × Reach: 12 m Capacity: 5,360 kg = Further Information = General Information Number of doors: 2 Cab: FL, single Technical Information Number of cylinders: 6 Engine displacement: 7,146 cc Gross vehicle weight: 16,000 kg Drivetrain Engine make: VOLVO Axle Configuration Tire size: 285/70 R19.5 Tread depth: 80% Bdsdpfx Ahsy Ak Uwe Seb Front axle: Max axle load: 5,800 kg; Steering Rear axle: Twin tires; Differential lock; Max axle load: 10,900 kg Functional Crane: PALFINGER PK9002EH-C (4x) + RADIO, year of construction: 2011, mounted behind the cab Condition Technical condition: good Visual condition: good

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2003, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, toplam uzunluk: 13.900 mm, toplam genişlik: 2.540 mm, toplam yükseklik: 2.600 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5, renk: diğer, Üretim yılı: 2003, Donanım: ABS, = Further options and accessories = - EBS - Alloy wheels = Remarks = Number of axles: 3, Unladen weight: 7,110 kg, Gross weight: 39,000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Alloy wheels, Suspension type: Full air suspension, ABS, EBS, Body year: 2003, Axle type: BPW = Further information = General information Cab: Day Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 6 mm; Tyre tread right: 3 mm Axle 2: Tyre tread left: 5 mm; Tyre tread right: 5 mm Bjdpfsyu Hz Nex Ah Sedb Axle 3: Steered; Tyre tread left: 8 mm; Tyre tread right: 6 mm Weights Curb weight: 7,110 kg Payload: 31,890 kg Gross Vehicle Weight (GVW): 39,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damages: none = Company information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European brands, model years and price categories. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing selection • Recognisable quality • Good pricing • Professional, correct business conduct • Multilingual staff • We understand our customers • Assistance with import and transport • (Export) registration quickly arranged • Competent technical services • The security of “recognisable quality” • And much more… Please visit our website for special offers and full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry through our website. Ask directly about our European warranty package.

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2003, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, toplam uzunluk: 10 mm, toplam genişlik: 2.540 mm, toplam yükseklik: 2.600 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5, renk: diğer, Üretim yılı: 2003, Donanım: ABS, = Additional Options and Equipment = - EBS - Alloy wheels Bedpfsyu Hzcsx Ah Sjdb = Notes = Number of axles: 3, Unladen weight: 5,930 kg, Gross weight: 39,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin diameter: 2 inch, Alloy wheels, Suspension type: Full air suspension, ABS, EBS, Body year: 2003, Axle type: BPW = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 2 mm; Tyre tread right: 7 mm Axle 2: Tyre tread left: 6 mm; Tyre tread right: 7 mm Axle 3: Steering axle; Tyre tread left: 4 mm; Tyre tread right: 6 mm Weights Unladen weight: 5,930 kg Payload: 33,070 kg GVW: 39,000 kg Functional Loading floor height: 128 cm Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealerships for used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European makes across all years and price ranges. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognized quality • Competitive pricing • Reliable business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • Assurance of "recognized quality" • And much more… Visit our website for special offers and full stock listings: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an enquiry via our website. Ask directly about our European warranty package.

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2005, yükleme alanı uzunluğu: 12.150 mm, yükleme alanı genişliği: 2.500 mm, toplam uzunluk: 12.400 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 2.600 mm, süspansiyon: hava, lastik boyutu: 425/65R22,5, renk: diğer, Üretim yılı: 2005, Donanım: ABS, = Additional Options and Equipment = Bjdpjyupansfx Ah Sjdb - EBS = Notes = Number of axles: 2, Unladen weight: 7,200 kg, Gross weight: 38,000 kg, Type of chassis: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body year: 2005, Axle type: BPW = Further Information = General Information Cab: Day cab License plate: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tire size: 425/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tire tread left: 6 mm; Tire tread right: 4 mm Axle 2: Steered; Tire tread left: 12 mm; Tire tread right: 12 mm Weights Unladen weight: 7,200 kg Payload: 30,800 kg Gross vehicle weight: 38,000 kg Functional Loading platform height: 158 cm Environment Emission class: Euro 0 Condition General condition: Moderate Technical condition: Moderate Visual condition: Moderate Damages: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing inventory of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, years of manufacture, and price categories. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing stock • Recognizable quality • Good prices • Accurate business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of “recognizable quality” • And much more…. Please visit our website for special offers and complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Ask directly about our European warranty package.

Koşul: yeni, toplam ağırlık: 16.000 kg, Flatbed swap body | Drop sides: 0.80 m | Length: 7.45 metres | Mounting points: 5.85 m | Subject to error, input mistakes and prior sale. Bdodjya Hcdopfx Ah Sjb

Koşul: ikinci el, ilk tescil: 02/2008, Üretim yılı: 2008, Schmidt Hagen SP/42/E/13,5-21,5 ∗3 dingilli platform dorse∗Yönlendirilebilir dingiller∗ALCOA∗ !!! Çok iyi durumda !!! ● ABS ● Havalı süspansiyon ● Kaldırma/indirme sistemi ● Zemin yüksekliği: 1.420 mm ● Alcoa - Dura Bright jantlar ● 3 x Mercedes dingil, disk frenli ● Tüm 3 dingil yönlendirilebilir! ● Lastik ölçüsü: 385/55 R 22.5 ● Diş derinliği: 3/2 / 5/4 / 5/6 mm ● Toplam ağırlık: 42.000 kg ● Boş ağırlık: 10.200 kg ● Yük kapasitesi: 31.800 kg - Alman dorse - TÜV / Araç muayenesi: İsteğe bağlı ve ek ücret karşılığında: YENİ! Bedsyutxzepfx Ah Ssdb Hatalar ve ara satış hakkı saklıdır! = Daha fazla bilgi = Daha fazla bilgi için Joannis Arpantzanis veya Kai Bühler ile iletişime geçin.

Koşul: ikinci el, boş ağırlık: 6.580 kg, azami yük ağırlığı: 27.420 kg, toplam ağırlık: 34.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2011, süspansiyon: hava, lastik boyutu: 385/65 R22,5, Donanım: ABS, Schwarzmüller platform dorse | BPW dingilleri, disk frenli | 2011 model | Stepne tutucu | Takım kutusu | Lastikler: 385/65 R22,5 | Hatalar ve ön satış hakkı saklıdır. Bodpfx Ahsx Uqxme Sjdb

Koşul: iyi (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 11/2011, toplam uzunluk: 13.650 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/55R22.5, dingil mesafesi: 9.350 mm, renk: beyaz, Üretim yılı: 2011, Axle configuration Tyre size: 385/55R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Aluminium rims; Lifting axle; Max. axle load: 9,000 kg Rear axle 2: Aluminium rims; Max. axle load: 9,000 kg Rear axle 3: Aluminium rims; Max. axle load: 9,000 kg Weights Unladen weight: 9,650 kg Payload: 29,350 kg Gross vehicle weight: 39,000 kg Condition Technical condition: good Visual condition: good Identification Bdedpeyyztrjfx Ah Sob Number plate: OL-78-GG Further information Please contact Arie for more information. = Additional features and equipment = - Electronic Braking System (EBS) - Hardwood floor - Lifting axle - Air suspension - Disc brakes