Alçak şasi römork

SCHWARZMÜLLER Tieflader mit gekröpftem Plateau

Durumu: yeni, azami yük ağırlığı: 30.860 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Donanım: ABS, Excerpt from Features List Frame - Steel welded frame construction with front frame kick-up, beveled front corners and rear chamfer, drive-on ramp with central excavator bucket recess (rear depression between the longitudinal rails, approx. 2,300 mm long). - Integrated in the outer frame: - 4 pairs of approx. 4t lashing straps - 7 pairs of recessed, retractable approx. 10t lashing rings (2x on the raised platform, 1x on the front chamfer, 3x in the low bed between the wheel recesses, and 1x on the drive-on ramp) 2 Pairs Wheel Recesses - 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), front after the kick-up, incl. one-piece drivable aluminum cover, for a max. surface load of approx. 11,650 daN per piece - 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), between the 3rd and 4th axle, including one-piece drivable aluminum cover, suitable for transporting wheel loaders with a wheelbase of approx. 2,700 - 3,600 mm and wheel diameter approx. 1,485 – 1,740 mm, rear loader overhang max. 2,220 mm - Width between the wheel recesses approx. 1,255 mm (= longitudinal rails outer/outer) Frame Attachments - 5 pairs of pockets in the outer frame for square post stakes approx. 100x50x5 mm (3x in the low bed, 2x on the raised platform) - Supplied without stakes - Both sides of low bed platform with extendable width extensions with approx. 50 mm softwood planks (the transport width of the machine must not exceed the frame width of approx. 2,550 mm) - 4 pairs of foldable approx. 10 t lashing rings, breakdown: - 1 pair front on raised platform, inside the longitudinal rails - 1 pair fully at the rear in the bucket recess left/right - 1 pair front on the raised platform before the kick-up, inside the longitudinal rails - 1 pair low bed at the rear before the ramp, in the bucket recess left/right Drawbar Equipment - Fixed drawbar with approx. 50 mm heavy-duty towing eye, cranked design, silent bushing support, drawbar holding spring with tensioner - Truck coupling height approx. 775 mm to approx. 975 mm - Drawbar length approx. 1,800 mm Support Equipment - 2 hydraulic rear supports – individually operated, controls in a separate stainless steel box Axles - SAF air-suspended low loader axles with drum brakes, axle load approx. 11 t/axle, S-cam brakes approx. 300/200 mm, automatic brake adjusters Wheels - 16 tires 245/70 R 17.5, 146/146F, Brand: Conti HTR2 (tire load capacity approx. 12 t/axle) Brake System/Suspension - Brake system per ECE regulation R13 - Two-line compressed air brake system - Brand: Wabco - EBS system 4S3M, 1st + 3rd axle sensor-monitored - RSS/RSP stability program - Spring-actuated parking brake on 3rd and 4th axle - Aluminum air tank for total weight 44t - Brake/air hoses with 2 single coupling heads yellow/red - EBS/ABS connection cable - Bungee cord for EBS and power plug storage - Air suspension with axle-lift/drop front and rear individually operated - Automatic adjustment to programmed driving level above 15 km/h Assistance/Safety Systems - SWIT – Schwarzmüller Intelligent Telematics Giedpfxoy Auhnj Abzjr Floor - Softwood floor approx. 50 mm, impregnated, protruding approx. 5–10 mm above frame upper edge - Steel checker plate cover over rear wheels Ramps - 2 folding 2-section steel ramps, hydraulically extendable, approx. 10° gradient, length approx. 2,750 + 1,350 mm, width approx. 800 mm, with 50 mm impregnated hardwood flooring - Ramps adjustable in width from center spacing approx. 250 mm