Alçak şasi römork

SCHWARZMÜLLER Tieflader mit gekröpftem Plateau

Durum: yeni, azami yük ağırlığı: 23.800 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Complete specification available on request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = Raised front platform including neck, corners chamfered Hfodpfx Asy Aug Robmoh * Approx. 5,350 mm = Low-bed platform – flat loading area * Approx. 850 mm = Rear ramp slope * Overall width approx. 2,550 mm (or with extensions approx. 3,000 mm) * Loaded loading height approx. 870 mm * When assembling a combination, please ensure compliance with the legally permissible total height and length! Chassis: * Steel welded construction with front neck and chamfered rear * Ramp slope with excavator bucket recess in center = rear depression between main beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing rails (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, retractable approx. 10 t lashing rings (4x in the low-bed, 1x in the ramp slope, 2x on the raised platform) * Standard ball-bearing slewing ring Chassis Attachments: * Pull-out extensions with softwood planks approx. 50 mm on both sides of the low-bed platform (track width of construction machines to be transported must not exceed outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, allocation: 1 pair at front raised platform inside main beams; 1 pair at the very rear in the bucket recess left and right; 1 pair at front raised platform in front of the neck, inside main beams; 1 pair at the rear of low-bed in front of ramp slope, in the bucket recess left and right Towing Equipment: * Fixed drawbar with swivel towing eye approx. 40 + 50 mm, cranked design, silent bushing bearing, drawbar hold spring with tensioner * Truck coupling height from approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support Equipment: * 2 pcs. automatic folding rear supports Axles: * SAF air-suspension low-loader axles with drum brakes, axle load 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 12 pcs. tires 235/75 R 17.5, 141J, manufacturer according to factory selection Brake System/Suspension: * Brake system in accordance with ECE directive R13 * Two-line compressed air brake system * Manufacturer Wabco, EBS system 4S3M, 1st and 2nd axle monitored * RSS/RSP stability program * Spring-actuated parking brake on 2nd and 3rd axle * Brake/air connection lines with 2 individual couplings yellow/red * EBS/ABS connection cable * Air suspension with lifting/lowering facility (only on rear axles), automatic ride height adjustment from 15 km/h (RTR), with axle stop on front axle Assistance/Safety Systems: * SWIT – Schwarzmüller Intelligent Telematics * Axle load display via EBS CAN bus signal for display in truck cab (truck must be prepared accordingly, not a certified scale) * Tire pressure monitoring as per ECE directive 141, with pressure sensor in the wheels, for display in truck cab (display unit etc. must be available in the tractor unit) Floor: * Softwood floor approx. 50 mm, impregnated, projecting approx. 5–10 mm above frame upper edge * Steel checker plate covering above wheels Ramps: * 2 pcs. foldable single-piece lightweight steel loading ramps, length approx. 2,800 mm, width approx. 750 mm, with impregnated hardwood floor approx. 35 mm * Ramps adjustable in width from intermediate di

Durum: yeni, azami yük ağırlığı: 30.860 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.550 mm, Donanım: ABS, Our complete vehicle inventory, including vehicles available immediately and at short notice, can be found on our website. Excerpts from the equipment list. Full equipment details available on request. Frame: * Steel welded construction with front frame drop, front corners chamfered and rear taper, drive-on ramp with centrally positioned excavator bucket recess = rear depression between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t rated lashing brackets, 7 pairs of recessed, pull-out approx. 10 t lashing rings (2x on the raised platform, 1x in the front frame drop, 3x in the lowbed between the wheel recesses and 1x in the drive-on ramp) 2 pairs of wheel recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located at the front after the frame drop including one-piece drive-over aluminium cover, for max. surface load of approx. 11,650 daN/unit * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), located between the 3rd and 4th axles, including one-piece drive-over aluminium cover, suitable for the transport of wheel loaders with a wheelbase of approx. 2,700 - 3,600 mm, with wheel diameter around 1,485 – 1,740 mm, maximum wheel loader overhang at rear 2,220 mm * Width between the wheel recesses approx. 1,255 mm (= outer edge to outer edge of longitudinal beams) Frame attachments: * 5 pairs of receptacle sockets in the outer frame for square tube stanchions approx. 100 x 50 x 5 mm (3x in the lowbed, 2x on the raised platform) * Both sides of the lowbed platform extendable widening with softwood planks approx. 50 mm (track width of construction machinery to be transported must not exceed outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, arranged: 1 pair at the front of the raised platform inside the longitudinal beams, 1 pair at the very rear in the excavator bucket recess left and right, 1 pair at the front of the raised platform before the frame drop inside the longitudinal beams, 1 pair at the rear of the lowbed before the drive-on ramp in the excavator bucket recess left and right Drawbar: * Fixed drawbar with approx. 50 mm heavy-duty towing eye, cranked version, silent bushing mount, drawbar retention spring with tensioner * Truck coupling height from approx. 775 mm to approx. 975 mm * Drawbar length approx. 1,800 mm Support system: * 2 hydraulic rear supports – individually operated, control system housed in a separate stainless steel box Axles: * SAF air suspension low-bed axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 16 tyres 245/70 R 17.5, 146/146F, make: Conti HTR2 (tyre load capacity approx. 12 t/axle) Brake system/suspension: * Brake system according to ECE directive R13 dual-line pneumatic brake system * Wabco EBS system 4S3M, 1st and 3rd axle sensor-controlled Hjdpfey Auhnjx Abmofh * RSS/RSP – stability program * Spring-loaded parking brake on 3rd and 4th axles * Aluminium air tanks for total weight 44 t * Brake/air hose couplings with 2 individual coupling heads yellow/red * EBS/ABS connection cable * Retaining rubber for EBS and electric connectors * Air suspension with lifting and lowering function, front and rear individually operable * Automatic adjustment to programmed ride height from 15 km/h Assistance/safety systems: * SWIT – Schwarzmüller Intelligent Telematics Floor: * Softwood flooring approx. 50 mm, impregnated,