Kullanılmış Müller-Mitteltal Eal-Ta-F satın al (33.719)

Koşul: yeni, azami yük ağırlığı: 16.400 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPM Tire Pressure Monitoring * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11-ton BPW Eco axles * Air suspension with lifting and lowering system * SmartBoard as an information tool on the trailer, with pressure sensors for display of total axle load per axle group * Lateral underrun protection * Mechanically adjustable warning panel packages front and rear * Front: closed plastic mudguards, Rear: straight galvanized steel skirts, each with spray guards * Hinged (hot-dip galvanized) lid for the toolbox on the turntable platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated), mounted on the right side * 15-pin power connector * LED lighting 12 / 24 V * Removable LED rotating beacon at the rear * Side marker lights with indicator control * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * Tire pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck) * Rubber covering on folding ramps and on the entry slope left and right (approx. 860 mm long) * Rubber covering on longitudinal beams from front to rear crossmember * Hardwood flooring on running surfaces of the low-bed platform * Four stake pockets on each side, with simultaneous 2-ton lashing capability per pocket * Load securing package comprising: 5 pairs UVV lashing rings, swiveling and retractable, loadable from all directions and recessed in the external frame - in the corners 13.4 tons, otherwise 10 tons * 6 pairs of mechanical folding outriggers for total width of 3 meters (not on the rear slope) * Plank holders under the loading area, longitudinal alignment * Raised roller stop in front of the front crossmember, with 1 x 6.4-ton lashing ring on each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves * Hydraulic lateral ramp displacement * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 up to max. 140 l/min) * Hydraulic control block, splash-proof * Two-line hydraulic system * Loading area above turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm entry slope) Itsdpfx Aoq Dyvcjb Teg * Loaded platform height: approx. 890 mm +/- 20 mm (with air suspension) * Chassis, turntable, roller stop, folding extensions & access ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks etc. painted in black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 20/2026

Koşul: yeni, azami yük ağırlığı: 16.400 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift and lower system * SmartBoard as an info tool on the trailer with pressure sensors to display axle loads per axle group * Side underrun protection * Mechanically adjustable warning sign packages at front and rear Itodpfx Astplv Neb Tsg * Front axle fully enclosed plastic mudguards and rear axle straight galvanized steel skirts, each with splash guards * Foldable (hot-dip galvanized) lid for the toolbox on the turntable platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated) mounted on the right side * 15-pin power connector * LED lighting 12/24 V * Removable LED beacon at the rear * Side marker lights with indicator activation * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * Tire pressure monitoring system with display capability in the truck via EBS signal (without truck-side installation) * Rubber covering on folding ramps and on the approach slope left and right (approx. 860 mm) * Rubber covering on longitudinal beams from front bulkhead to rear cross member * Hardwood flooring on the running surfaces of the low-bed platform * Four stake pockets each side with integrated 2 t lashing points * Load security package consisting of: 5 pairs of UVV lashing rings, swivel-mounted and retractable, loadable in all directions and embedded in the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers up to 3 m overall width (not on the rear slope) * Plank holder under the loading area in longitudinal direction * Raised roller stop in front of bulkhead with 1 x 6.4 t lashing ring each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically deployable tip section and load-holding valves * Hydraulic lateral ramp shift * Rear support hydraulically operated (single-stage cylinder) * Hydraulic flow divider in trailer (for hydraulic pump capacity in truck over 40 l/min up to max. 140 l/min) * Hydraulic control block splash-proof * Two-line hydraulic system * Turntable area loading deck: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach slope) * Loaded loading height: approx. 890 mm +/- 20 mm air suspension * Chassis, turntable, roller stop, folding extensions, and ramps hot-dip galvanized * Axles, turntable, drawbar, air tank, etc. painted in a black tone * Loaded loading height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from calendar week 20/2026

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 85.000 mm, yükleme alanı genişliği: 30.000 mm, yükleme alanı yüksekliği: 30.000 mm, Üretim yılı: 2016, T3 Profil 30, 0: Drum brakes, 3 x 10 t axles, side underrun protection, swing-out supports at the rear of the chassis frame, mechanically adjustable warning sign packages at the front and rear, folding lid on the toolbox in the bogie platform, 4 lashing eyes per side, 6 pairs of mechanical folding outriggers for a total width of 3 m, extension planks stored in the middle of the loading area, hydraulically operated, two-part loading ramps, laterally adjustable, loading area above the slewing ring: approx. 2,000 x 2,520 mm, loading height approx. 1,070 mm, rear loading area: approx. 6,500 x 2,520 / 3,000 mm, loading height approx. 910 mm (including 860 mm approach slope), technically permitted gross weight of 30,000 kg, vehicle is hot-dip galvanized and in excellent, near-new condition. Ijdsyz Ix Repfx Ab Tetg = Further information = Weights Payload: 24,000 kg gross vehicle weight: 6,000 kg Maintenance, history, and condition Number of owners: 1 Technical condition: Very good Visual condition: Very good Further details Front tire condition: 90% Rear tire condition: 90% Front tires: 235/75 R 17.5 Rear tires: 235/75 R 17.5 Country of manufacture: DE Further information Please contact Bernd Strack for further details.

Koşul: yeni, azami yük ağırlığı: 6.810 kg, toplam ağırlık: 9.600 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 4.030 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * EK 9.6 ----Braking system: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * SAF axle ----Suspension: * Parabolic springs ----Drawbar / Flange Eye: * Drawbar as central axle drawbar with 40 mm bolt-on drawbar eye * Infinitely adjustable drawbar height via spindle lifting element instead of rigid drawbar ----Coupling height: * Standard coupling height approx. 900 mm (+/- 150 mm) ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED tail lights * Flashing side marker lights ----General attachments: * Support windlass at the front * Enclosed plastic mudguards * Folding underride guard for paver applications ----Chassis: * Chassis made of fine-grain steel ----Tipper body: Iedpfx Abow Ndr Uj Totg * Pal.- 3-way tipper body * 700 mm steel front wall * Aluminum side walls, asymmetrical, continuous, without center stanchion, foldable with long travel locks and swinging via manual central locking * 800 mm high steel rear wall with automatic rear wall opening during rear tipping * 4 mm Hardox 450 steel floor ----Load securing: * On each side, 2 pairs of 3 t lashing rings, recessed and foldable in the steel floor ----Paintwork: * Chassis, drawbar, underride guard hot-dip galvanized * Tipper body painted in a RAL color of choice (no special or metallic paint), color can be changed up to approx. 6 weeks before completion ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. calendar week 42/2026

Koşul: ikinci el, boş ağırlık: 8.800 kg, azami yük ağırlığı: 31.200 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/1996, yükleme alanı uzunluğu: 10.000 mm, yükleme alanı genişliği: 2.510 mm, yükleme alanı yüksekliği: 1 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: kırmızı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Araç lokasyonu: Bovenden, 4 akslı, döner tabla, yaprak süspansiyon, 3 metreye kadar genişletilebilir, bağlama halkaları, 2 parçalı rampalar, hidrolik rampalar, arka destek, yan alüminyum yan koruma, çift tekerlek, depolama kutusu. Üst yapı: Hidrolik 2 parçalı rampa ile donatılmış 4 akslı alçak yükleyici dorse. Yükseklik yaklaşık 900 mm. 4x 10 ton SAF aks, kampanalı frenler, 40'lık ve 50'lik çeki halkası! Üst platform uzunluğu yaklaşık 2900 mm! Alt platform uzunluğu yaklaşık 7100 mm! EKİPMAN BİLGİLERİ GARANTİSİZ VERİLMİŞTİR, değişiklik, ara satış ve yazım hataları saklıdır! Itjdeywvhrspfx Ab Tjg

Koşul: yeni, azami yük ağırlığı: 30.080 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T4 RM 40.0: * Wabco EBS-E (elektronisches Bremssystem) * Notlöseeinrichtung für Federspeicherzylinder * Reifendrucküberwachung mit Anzeigemöglichkeit im LKW über EBS-Signal – keine zusätzliche LKW-seitige Installation erforderlich * Trommelbremsen * 4 x 11 t Gigant-Achsen * Luftfederung mit manueller Absenkung hinten * Warnzeichenpaket vorne & hinten * SmartBord Infotool zur Achslastanzeige je Achsgruppe, mit Drucksensoren montiert * Reflektierendes Konturband seitlich und hinten * Abnehmbare LED-Rundumleuchte hinten * 15-poliger Stromstecker * LED-Schlussleuchten * Gerade Zugdeichsel mit 50 mm Zugöse und stufenloser Höheneinstellung * Geschlossene Kunststoff-Einzelkotflügel vorne * Gerade Stahlkotflügel hinten, jeweils mit Spritzschutz (zur Sprühnebelunterdrückung) * Seitlicher Unterfahrschutz * Vorbau vor der Drehgestellplattform ca. 520 mm, 45° Ecken, 3 Ablagefächer mit abschließbaren, nach hinten öffnenden Klappdeckeln * Fahrgestell aus hochfestem Feinkornstahl * Plattenboden über Drehgestellplattform: 50 mm Nadelholz, auf der Tiefladeplattform: 60 mm Nadelholz * Auffahrrampen: äußere Bohlen aus 50 mm Hartholz * Ladungssicherungspaket (Lasi-Paket): Itsdpfx Abexmpydj Teg - 2 Zurrösen (6,4 t) vorne links und rechts auf Hauptrahmen der Drehgestellplattform - Seitlich vorne und hinten je 1 Paar Zurringe (13,4 t) am Außenrahmen - Seitlich je 1 Paar Zurringe (10 t) schwenk- und absenkbar, alle Richtungen belastbar, im Außenrahmen eingelassen - An Außenseiten der Radmulden angeschraubte Zurringe (5 t) – vorne je 2 Stück, hinten 1 Stück - Seitlich in Baggerstielablage 2 Paare Zurringe (6,4 t) * 11 Paare Klappausleger für 3 m Gesamtbreite (ausgenommen Heckschräge) * Staufach für Verbreiterungsbohlen aus Stahlblech (L = 2.470 x B = 570 x H = 250 mm), quer vor 1. Hinterachse montiert * Baggerstielablage über Hinterachse bis Ende Anfahrschräge (ca. 2.300 x 740 x 190 mm) * Seitlich je 2 Radmulden (ca. 640 mm breit; vorn 340 mm tief, hinten 220 mm tief), mit einschiebbarer Abdeckung, Ablage vorne auf der Drehgestellplattform – geeignet für Radlader-Transport mit 3.100 – 3.640 mm Radstand * Mechanische Fallstützen hinten * Hydraulische Klapprampen mit hydraulisch ausstellbarem Spitzteil (ca. 4.650 x 720 mm) * Hydraulischer Rampenverschub seitlich * Ladefläche über Drehkranz: ca. 2.990 x 2.520 mm * Hintere Ladefläche: ca. 6.780 x 2.520 mm, Ladehöhe beladen ca. 890 mm +/- 20 mm (inklusive 860 mm Anfahrschräge) * Fahrgestell, Drehgestell, Klappausleger, hintere Fallstützen und Auffahrrampen feuerverzinkt * Achsen, Luftkessel und Zugdeichsel in Schwarz lackiert * Bereifung: 235/75R17.5 * Fahrzeug ist feuerverzinkt * Neufahrzeug mit Herstellergarantie * Irrtümer und Zwischenverkauf vorbehalten * Sofort verfügbar ab Egestorf

Koşul: yeni, azami yük ağırlığı: 30.080 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with in-cab display via EBS signal – no truck-side installation required * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning panel packages front & rear * SmartBord info tool installed with pressure sensors for displaying total axle loads per axle group * Reflective contour tape on the sides and rear * Removable LED beacon at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and continuously adjustable height * Closed individual plastic mudguards at the front * Straight steel mud flaps at the rear, each with spray suppression Iedsxmpykepfx Ab Tjtg * Side underrun protection * Front section in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments with lockable hinged covers (opens to the rear) * Chassis made of high-strength fine-grained steel * Decking above bogie platform: 50 mm softwood; low loader platform: 60 mm softwood * Outer planks of ramps made from 50 mm hardwood * Load securing package including: 2 lashing eyes (6.4 t) front left and right on the main frame of the bogie platform; 1 pair of 13.4 t lashing rings left and right at the front and rear on the outer frame; 1 pair each side 10 t lashing rings foldable and lowerable, loadable in all directions and recessed in the outer frame; 5 t lashing rings bolted to the outer frame near wheel recesses (2 at the front wheel well, 1 at the rear); 2 pairs of 6.4 t lashing rings within the excavator boom trough * 11 pairs folding extensions for 3 m overall width (not on rear slope) * Storage box (L = 2,470 x W = 570 x H = 250 mm) for width extension planks made from sheet metal, mounted crosswise to the loading area in front of the first rear axle * Excavator boom trough above rear axle to end of approach slope approx. 2,300 x 740 x 190 mm * 2 wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with insertable covers (storage for inserts at the front on the bogie platform) for transporting wheel loaders with wheelbase 3,100 – 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm * Hydraulic lateral ramp displacement * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm; loaded platform height approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, bogie, folding extensions, rear supports and ramps hot-dip galvanized * Axles, air tanks and drawbar painted black * Tyres: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to prior sale and errors * Immediately available from Egestorf

Koşul: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height increases by +30 mm when lifted) * Last axle steered (axle steering lock for maneuvering can be engaged from the driver’s cab without truck-side installation or additionally via a switch on trailer). The lock must be disengaged before entering public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (requires truck-side installation), with speed-dependent activation via EBS control Iodpfxol Tihue Ab Totg ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring system, displayable in truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * Removable LED beacon at the rear ----General Attachments: * Mechanical warning sign package for 3 m total width * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, mounted left side * Front plastic mudguards and rear galvanized steel mudflaps ----Low Loader Deck: * Gooseneck turntable platform with 45° corners and 3 storage compartments with lockable folding lids (rear-opening) * Shortened lowbed platform by 500 mm to 6,280 mm including extended stepped contour, 500 mm forward * Rubber lining on folding frame, drive-on slope and load-bearing surface on the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing points per side (front & rear corners) * 5 x 10 t UVV lashing rings per side (pivoting, retractable, loadable in all directions) * 4 stake pockets per side, also providing 2 t lashing capability each * 1 x 16 t UVV lashing point on the rear traverse ----Widening: * Extendable and foldable extension arms for up to 3 m total width (deck board holder under the chassis, right side) ----Excavator Stick Recess: * Fully continuous, reinforced profile from last axle to rear cross member. Approx. L=2,350 x W=770 x D=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for truck hydraulic pump outputs over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Load area above turntable: 2,600 + 390 x 2,520 mm * Lowbed area: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Paintwork: * Chassis, turntable, drawbar, extension consoles, and loading ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Notes: * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: Immediately available*

Koşul: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring brake chambers * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm with axle lifted) * Last axle with trailing steering (lockable from cab for shunting without truck-side installation, additionally lockable via switch on the trailer). Lock must be deactivated before entering public roads. * Forced relief as well as forced lowering of lift axle for manoeuvring purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon at rear ----General Attachments: * Mechanical warning sign kit for 3 m overall width * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, on left side * Plastic fenders at front axle, galvanized sheet steel fender skirts at rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear) * Shortening of the low-loader platform by 500 mm to 6,280 mm including extended offset bending by 500 mm to the front * Rubber coating on folding frame, approach slope, and running surface of low loader platform Itjdpfx Asxptn Djb Teg * Bamboo timber between longitudinal beams in front of excavator stick rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings in the front corners * 2 x 13.4 t UVV lashing points front and rear on each side * 5 x 10 t UVV lashing rings on each side (pivoting, lowerable, and loadable from all directions) * 4 stake pockets per side, each with 2 t lashing option * 1 x 16 t UVV lashing point at rear cross member ----Widening: * Extendable and foldable widening arms for 3 m overall width (plank holder under the chassis on front right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on the side in the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and deployable pointed section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump performance in truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Deck Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope ----Paintwork: * Chassis, turntable, drawbar, widening consoles, access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: Available immediately*

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2005, renk: siyah, Üretim yılı: 2005, Donanım: ABS, - Stepne - Çift tekerlek dingili Iodpfx Ajxw T Uaeb Tjtg

Koşul: ikinci el, azami yük ağırlığı: 15.100 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/1987, yükleme alanı uzunluğu: 8.650 mm, yükleme alanı genişliği: 2.480 mm, ? Mekanik rampalar ? Yükleme yüksekliği: yaklaşık 910 mm ? Stepne tutucu ? 40 mm çekme halkası ? Dönerek yanıp sönen uyarı lambası ? Kampana frenler ? Yaprak yaylar Ijdeyw Egwspfx Ab Tstg ? 1 x saklama kutusu ? Çift lastik ? SAF akslar Tüm bilgiler taahhütsüzdür / Ara satış hakkı saklıdır.

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2004, Üretim yılı: 2004, Donanım: ABS, - EBS Daha fazla bilgi için lütfen bizimle iletişime geçin. Itjdjxyx Haopfx Ab Tog

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes Isdpjx Ipa Nefx Ab Totg * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front: closed plastic fenders; Rear: straight galvanized steel skirts, both with splash protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi-voltage electrical system * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * Four stake pockets on each side (stakes not included), with simultaneous lashing facility * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slant) * Widening planks stored at the center of the loading area * Excavator arm rest from rear axle to end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the excavator arm rest) * Mechanical one-piece access ramps with spring assistance (approx. 3,000 x 720 mm) * Mechanically adjustable lateral ramp positioning * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, towing bar, and access ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * Dead weight 5,900 kg * --Technically possible gross vehicle weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available from Egestorf

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization (rear) * Side underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox on the bogie platform * Multi-voltage system Iedpfxjx Ipavs Ab Totg * LED rear lights * Detachable rotating beacon (rear) * Towing bar with 40 mm towing eye and height adjustment via return spring & turnbuckle * 15-pin electrical connector * 4 stake pockets per side (stakes not included) with integrated lashing points * Load securing package (La-Si Package) includes: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV lashing rings, pivoting and retractable, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3 m overall width (not at the rear diagonal) * Widening planks stowed in the center of the loading area * Excavator arm trough over rear axle to end crossmember, approx. 2,100 mm long (2 pairs 6.4 t lashing eyes on each side in the excavator arm trough) * Mechanical single-piece access ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment * Load area above turntable: approx. 1,960 x 2,520 mm * Unladen load height: approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Unladen load height: approx. 910 mm (incl. 860 mm approach angle) * Chassis, bogie, towing bar, and ramps hot-dip galvanized * Axles, springs, air reservoir, etc. painted in black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * Technically permissible gross weight of 30,000 kg * Vehicle is hot-dip galvanized * Brand new vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: ikinci el, azami yük ağırlığı: 17.290 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2017, bir sonraki muayene (TÜV): 07/2026, yükleme alanı uzunluğu: 8.900 mm, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, * ABS * 5-odalı arka farlar Itsdpsyulu Usfx Ab Tsg * Turuncu döner uyarı lambası * Duomatik hava bağlantısı * BPW-ECO akslar ----Üst yapı: Alçak şasi römork, galvanizli şasi (1900+7000mm)/yaklaşık 900mm yükleme yüksekliği, arka kısmı eğimli/yaklaşık 770mm rampa yüksekliği, çelik/ahşap zemin, 3 metreye kadar genişletilebilir, kaymaz kaplamalı hidrolik katlanır rampalar (galvanizli), hidrolik olarak yana kaydırılabilir, sabitleme halkaları Satış yalnızca ticari işletmelere yapılmaktadır. İHRACATTA SADECE NET FİYAT ÖDENİR!!!!! TÜM BİLGİLER EKİPMAN VE AKSESUARLAR İÇİN GARANTİSİZ VERİLMİŞTİR. Tüm satın alma sözleşmeleri, faturalar, proforma faturalar, siparişler ve satış görüşmelerinin temeli genel şartlarımızdır (ayrıntılar için künyeye bakınız).

Koşul: ikinci el, ilk tescil: 06/2011, toplam genişlik: 25.500 mm,

Koşul: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2025, * T3 Profi 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Rear swing-out supports mounted to chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic fenders; rear axle: straight galvanized steel skirts, each with spray guards * Reflective contour marking tape on sides and rear * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Foldable lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Towing bracket with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pole power plug * 4 stake pockets per side (no stakes included), with integrated lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed into the outer frame – rated at 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3 m total width (not on the rear slope) * Widening planks stored in the center of the loading area * Hot-dip galvanized monobloc hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally * 4-way control block for retrofit of hydraulic side ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach ramp) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight Itodpsl Th I Asfx Ab Teg * Technically permissible total weight: 30,000 kg * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from calendar week 11/2026

Koşul: yeni, azami yük ağırlığı: 30.740 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lower function and RtR valve * Smard-Board for load weight measurement * Warning panel packages at front & rear * Side and rear reflective contour tape * Rotating beacon (removable) at rear * LED lamp * Straight drawbar with 50 mm towing eye and infinitely adjustable height setting Itjdpfxel Tik Nj Ab Tog * Tool box made of powder-coated steel sheet and spare wheel holder in basket design, right side * Closed individual plastic mudguards at the front * Straight steel mud flaps with splash guards at the rear (spray suppression) * Side underrun protection * Extension of the turntable platform at front by 520 mm with 45° corners and three recessed storage compartments incl. lid and lockable * Chassis made of high-strength fine-grain steel * Platform floor over turntable platform made of 50 mm and in low-loader platform of 60 mm coniferous wood * Outer planks of the drive-on ramps made of hardwood * Four stake pockets each side (stakes not included), with simultaneous 2 t lashing capability * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform * Two pairs of 13.4 t lashing rings each at the front and rear of the side outer frame, and four pairs of 10 t lashing rings each side, swiveling and lowerable * Loadable in all directions and recessed into the outer frame * Two pairs of 6.4 t lashing rings at the excavator stick recess on each side * 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening planks stored in side left storage compartment * Excavator stick compartment above rear axle up to end of drive-on slope, approx. 2,100 x 740 x 190 mm * Mechanical support legs at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm, incl. hydraulic side ramp shift and load holding valve * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height laden: approx. 890 mm, +/- 20 mm (including 860 mm drive-on slope) * Flow divider installed * Chassis, turntable, drive-on ramps, folding outriggers and mechanical support legs hot-dip galvanized * Axles, drawbar, air reservoir and slewing ring painted in black * Tires 235/75 R 17.5 * New vehicle without first registration with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf, on the A7

Koşul: yeni, azami yük ağırlığı: 30.740 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system and RtR valve * Smard on-board system for load weight determination * Warning panel packages at front & rear * Reflective contour marking tape on sides and rear * Removable rear rotating beacon * LED lights * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel carrier in basket design, mounted on the right side * Front: closed single fender in plastic * Rear: straight steel mudguards with spray suppression (spray mist reduction) * Side underrun protection * Extension of the bogie platform at the front by 520 mm with 45° corners and 3 integrated storage compartments including lids, lockable * Chassis made of high-strength fine-grained steel Iedpfx Absl Tphrs Tstg * Floor above bogie platform: 50 mm softwood; deep bed platform: 60 mm softwood * Outer planks of access ramps made of hardwood * 4 stake pockets per side (no stakes present), each with 2 t lashing capacity * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform * At the side, front and rear: 2 pairs each of 13.4 t lashing rings on the outer frame; also, 4 pairs per side of 10 t lashing rings, swivel and lowerable * Loadable in all directions and recessed into the outer frame * 2 pairs of 6.4 t lashing rings at the excavator arm rest * 8 pairs of galvanized fold-out outriggers for 3-meter total width (not in the rear slope) * Widening planks for the left side stored in a compartment * Excavator arm rest above the rear axle up to the end of the approach slope approx. 2,100 x 740 x 190 mm * Mechanical rear supports * Hydraulic folding ramps with hydraulically adjustable tip section approx. 4,650 x 720 mm incl. hydraulic lateral ramp shifting & load-holding valve * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height (loaded): approx. 890 mm, +/- 20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, bogie, access ramps, fold-out outriggers and mechanical rear supports hot-dip galvanized * Axles, drawbar, air tank and slewing ring painted in black * Tires: 235/75 R 17.5 * New vehicle without first registration, includes manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf, A7

Koşul: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0: * EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical rear axle compensation * Side underrun protection * Swing-type supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel sheet skirts, each with spray protection * Reflective contour tape on sides and rear * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Foldable lid (hot-dip galvanized) for the toolbox in the bogie platform * Multi-voltage electrical system * LED tail lights * Rear removable beacon * Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included), can also be used for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 6 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and integrated in the outer frame – in the corners rated at 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for a 3 m overall width (not at the rear taper) * Widening planks stored in the center of the loading area * One-piece hot-dip galvanized hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Four-way control block for retrofitting hydraulic lateral ramp displacement * Platform over fifth wheel: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear platform: approx. 6,500 x 2,520 mm Iedpfxol Th Nns Ab Totg * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technically permissible gross weight: 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 11/2026

Koşul: ikinci el, azami yük ağırlığı: 9.400 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2020, yükleme alanı uzunluğu: 6.300 mm, yükleme alanı genişliği: 2.480 mm, Stok No.: ZANDT Çok iyi bakılmış tandem platform dorse ZANDT Cargo * TAT B 110 * Platform * Güçlendirilmiş ahşap taban * Ağır hizmet tipi yük bağlama rayları * 2 dingilli tandem * Geniş lastikler * Ayarlanabilir çekme oku * Azami toplam ağırlık 11.900 kg * Çok iyi durumda Takas mümkün %3,99'dan başlayan finansman Hatalar ve ara satış hakkı saklıdır! Itedsymuz Uopfx Ab Tsg Bu ilandaki bilgiler bağlayıcı olmayan tanımlardır ve taahhüt edilmiş özellikler olarak kabul edilemez. Satıcı, yazım veya veri iletim hatalarından sorumlu değildir. Belirtilen donanım ayrı olarak kontrol edilmelidir. İlanlardaki tüm bilgiler bağlayıcı değildir! Almanya genelinde teslimat talep üzerine mümkündür Çalışma saatleri: Pazartesi - Perşembe 09:00-17:00 Cuma 09:00-14:00 ve randevu ile!

Koşul: ikinci el, azami yük ağırlığı: 9.400 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2020, yükleme alanı uzunluğu: 6.300 mm, yükleme alanı genişliği: 2.480 mm, Stok No.: ZANDT Çok iyi bakımlı tandem platform römork ZANDT Cargo * TAT B 110 * Platform * Güçlendirilmiş ahşap zemin * Ağır yük bağlama rayları * 2 dingilli tandem * Geniş lastikler * Ayarlanabilir çekme oku * Azami toplam ağırlık 11.900 kg * Çok iyi durumda Takas mümkündür %3,99’dan başlayan finansman Hatalar ve ara satış hakkı saklıdır! Bu ilandaki bilgiler bağlayıcı olmayıp, taahhüt edilen özellikler değildir. Satıcı yazım veya veri iletim hatalarından sorumlu değildir. Belirtilen donanımlar ayrıca kontrol edilmelidir. İlanlardaki tüm bilgiler bağlayıcı değildir! Tüm Almanya’ya teslimat talep üzerine mümkündür Çalışma saatleri: Pazartesi-Perşembe 09:00-17:00 Cuma 09:00-14:00 ve randevu ile! Itodpfx Asymuz Ieb Teg

Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Braking System: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: Iodpov D Tbkefx Ab Tetg * Air suspension with lift and lowering function ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 removable LED beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3-m warning board sets, front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, each left & right side * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m external container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) at an overall external width of 3,000 mm ----Load Securing: * Perforated outer frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option for installing 3 t recessed lashing rings every 600 mm – 5 x 3 t UVV lashing rings installed on each side * In the front and rear corners, 1 x 6.3 t lashing eye each (in front directly behind the container locks in the wooden floor and at the rear in the end beam) * Various drillings in the front and rear beams for 1.2 t lashing points ----Ramps: * 1 pair of aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired and tracked vehicles * Rear accessible storage compartment recessed under the loading platform in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized--- * Axles, air tank, front support winch, and flange drawbar eye painted black ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 22/2026

Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Brakes: * EBS (Electronic Braking System) * Emergency release mechanism for spring-loaded brake cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Eye: * Drawbar height-adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting B-dimension approx. 8,080 mm) * 40 mm flange drawbar eye Itsdpov D Tbdofx Ab Teg ----Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (activated via reverse gear) * 1 removable LED beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning panel sets front and rear * Landing gear at the front * Outward-folding support legs at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, mounted on left and right side * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable; locking measure retracted according to ISO-DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this is not a DIN standard) at a total external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for fitting 3 t recessed lashing rings every 600 mm — mounted 5 x 3 t UVV-certified lashing rings per side * In the front and rear corners, 1 x 6.3 t lashing ring each (front, directly behind the container locks in the timber floor, rear in the end beam) * Multiple holes in front and rear end beams for 1.2 t lashing options ----Ramps: * 1 pair aluminum slide-in ramps approx. 3,570 x 410 mm (10 t/pair load capacity), suitable for rubber-tyred and tracked vehicles * Rear-accessed storage compartment under the loading area, integrated into the chassis ----Paintwork: * Chassis, drawbar, front wall, underrun protection as well as rear supports galvanized * Axles, air tanks, front landing gear, and flange drawbar eye painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 22/2026

Koşul: ikinci el, azami yük ağırlığı: 17.500 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2005, bir sonraki muayene (TÜV): 01/2027, yükleme alanı genişliği: 2.500 mm, ? Hidrolik rampalar ? Genişletilebilir ? Her iki tarafta 8 adet yük bağlama halkası ? Stepne tutucu ? Yükleme yüksekliği: yaklaşık 930 mm ? Kampanalı fren ? Duomatic bağlantı ? Yaprak yaylı süspansiyon ? Çift tekerlekli lastik Itsdpfxoytz Hwe Ab Tog Tüm bilgiler garanti verilmeden sunulmuştur / Ara satış hakkı saklıdır.