Kullanılmış Martz Alçak Yükleyici Inşaat Makineleri satın al (22.887)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tele-Semi-Radmu.-Ram.
Ara
Durum: yeni, boş ağırlık: 11.000 kg, azami yük ağırlığı: 38.500 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Gooseneck:
- Gooseneck with rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Loading Platform:
- Telescopic loading platform with rear chamfer approx. 1,000 mm x 8°
- 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm
- Wheel recesses with 15 x 15 mm square climbing strips and lower section widenings
- Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm
- Recess in the bevel and extending into loading platform for excavator stick approx. 2,900 x 750 x 210/290 mm
- 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN)
- 5 pairs of outward-folding lashing rings (LC 5,000 daN)
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- 2 pairs of lashing rings in excavator stick recess (LC 5,000 daN)
- Cut-outs in outer frame of loading platform for securing straps (LC 2,000 daN)
- Incl. 3-piece removable galvanized covers over wheel recesses – max. point load 3.5 t / each
Two-Piece Steel Ramps:
- One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm hardwood covering
- Ramp with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulically shiftable
Axles and Tyres:
- BPW axles and suspension, 2 rigid axles, 1 self-steering axle
- Technical axle load: 12,000 kg
Gbsdpfx Aqjup U Hzotjn
- Electromagnetic reverse lock activated via reverse gear and manually
- Air suspension with lifting and lowering valve
- Axle tools
- Tyres 235/75 R 17.5
- TPMS tyre pressure monitoring system in accordance with ECE R 141
Accessories Included:
- Brackets for warning panels left and right on gooseneck and rear, incl. socket
- One spare wheel
- 2" kingpin
- One galvanized steel front wall, approx. 400 mm high
- Yellow-red air couplings on galvanized connection rail at front
- 4 wheel chocks
- Galvanized, extendable widenings by approx. 230 mm per side
- Galvanized folding supports under rear bevel of platform
- Bracket for beacon at rear of trailer
- Cover plates to bridge the gap between ramps and platform
- White reflective tape to EU regulations on sides and extension, red at the rear
- Electro-hydraulic unit at rear, under loading platform
- Control valves for ramps positioned on right side of trailer
- European reflector signs (red-yellow) on rear of trailer
- Four extendable warning panels by approx. 400 mm, approx. 423 x 423 mm, with a position light
- Mount for beacon on warning panels
- Removable ALU sideboards and tailgate on gooseneck approx. 2,440 x 400 mm
- Rear galvanized removable stakes (body length approx. 2,560 mm)
- 2 pairs WADER container locks in the loading platform for one 20ft or 30ft container
- 3 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the platform
- One removable galvanized intermediate table with 1 pair WADER container locks
- Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the platform bevel
- Anti-slip coated sand layer on tread plates of gooseneck and platform
- 80 km/h speed limit stickers on the rear and on both sides
- Load gauge for determining axle loads, including load diagram
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
Meusburger3-Achs-Semi 2P. Radmul.-Federhebewerkra.
Ara
Durum: yeni, boş ağırlık: 8.950 kg, azami yük ağırlığı: 40.050 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.950 kg, Donanım: ABS, Chassis:
- Robust welded steel frame construction with a cranked front section and level loading area, with rear tapering approx. 500x100 mm
- Neck height 200 mm with chamfered corners
- Tapered end swan-neck approx. 500 x 100 mm (anti-slip ribs on outer frame in area of rear taper)
- 2 king pin positions, replaceable 2" king pin
- Closed outer frame with perforated outer profile for lashing with tension straps
- Reinforced frame design / point load in center of gravity
- Preparations for extendable loading area wideners
- With excavator trough, approx. 220 mm deep, approx. 600 mm wide, extending approx. from after second axle to end of vehicle
- 1 pair of wheel recesses in front of axle with steel covers
- (Covers coated with Körapur), approx. 400 mm deep, and 1 pair of wheel recesses between 1st and 2nd axle with steel covers
- Rear underride guard = extended end plate
- Drop supports at rear
Ramps:
- 2 single-piece aluminum drive-on ramps with spring-assisted lifting function
- Length x width approx. 2,500 mm x 600 mm
- Lockable in transport position using tension straps
- Manually sideways adjustable
Floor:
- 35 mm larch wood floor with aluminum omega profiles
Landing Gears:
- Mechanical 24t landing gears, one-side operation with load compensation
Axles, Steering and Tires:
- BPW air suspension axles, 10t axle load each, air bag diameter 360 mm
- S-cam brake 300/200 mm, asbestos-free brake pads
- Automatic slack adjuster
- Lifting and lowering device, total stroke approx. 200 mm
- 2nd ride height via ball valve +50 mm
- 1st axle with lift function (wired via EBS), fully automatic confirmation with mechanical emergency actuation via push button on trailer
- 3rd axle as friction-steered trailing axle with electrical and mechanical lock
- 12 steel disc wheels, 10-hole, centered offset
- 12 tires 245/70 R 17.5 143/141J, tubeless
- Incl. tire pressure monitoring
Brake System:
Gbjdjwu Agijpfx Aqtjn
- Dual-circuit brake system with EBS-E including RSS
- EBS (WABCO 4S3M)
- Spring-loaded parking brake
- Air connections yellow / red
Painting:
- Steel shot blasting, spray galvanizing of frame and primer
- Painting chassis/wheel hubs/outer frame in DB 7350 Nova Grey
- Plastic parts black, unpainted
- Rims: factory silver
- Reflective tape side and rear in yellow
Accessories:
- Plug-in side and rear boards on the swan neck, approx. 400 mm high
- Spare wheel holder
- Aluminum docking protection
- 4 wheel chocks
- Sheet metal mudguards with Clear-Pass
- Elongated license plate holder in end plate
- 1 plug-in ECE panel at rear
- 11 pairs of ZK modules 10t side:
- 2x on the swan neck
- 9x on the loading platform
- Without rear tow rings
- Extendable warning signs incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm
- 4 holders for warning signs, insertable into stake pockets on loading platform
- 6 pairs of stake pockets on the side for insertable stakes 100x50 mm
- 2 rows of transverse stake pockets for insertable stakes 100x50 mm on swan neck from outer frame towards main frame (1x before and 1x after king pin positions)
- 3 rows of transverse stake pockets for insertable stakes 100x50 mm on the loading platform from outer frame towards main frame (1x front, 1x before 1st axle, and 1x after 3rd axle)
- 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container
- Rubber apron mounted on underride guard
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
Meusburger2-Achs-Jumbo-Tiefbett mit Planenaufbau
Ara
Durum: yeni, boş ağırlık: 11.000 kg, azami yük ağırlığı: 27.000 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 235/75 R17.5, renk: gri, işletme ağırlığı: 11.000 kg, Donanım: ABS, Chassis:
- Welded steel frame construction with front and rear frame cranking and drop deck without rear bevel
- Frame neck + fifth wheel plate 225 mm
- Drop deck designed for a point load of 25 t over 5 m
- Outer frame closed outward with welded-in lashing rings for securing loads
- Interchangeable 2" kingpin
- Rear mounting rail for aluminum ramps
Axles and Tyres:
- BPW low-bed trailer axles, each with a 10 t axle load, air bag diameter 360 mm
- Air suspension with lifting and lowering function, stroke 220 mm (-60/+160 mm)
- Wabco SmartBoard with ECAS function for two coupling heights +100 mm
- S-cam brake 300/200 mm, asbestos-free brake linings
- Automatic slack adjusters
- IVTM tire pressure monitoring system
- 9 tires 235/75 R 17.5, tubeless
Steering:
- 1st and 2nd axle hydraulically forced steered via fifth wheel coupling
Gbjdeiu Eu Nspfx Aqtsn
Floor:
- Multi-layer bonded flooring, 27 mm thick, flush with outer frame and longitudinal beams
- Underside reinforced with GRP coating
- 12 pairs of lashing rings welded into the outer frame (8 pairs RUD 8 t – 6 pairs in the drop deck as well as 1 pair each on the gooseneck and at the beginning of the rear unit – 2 pairs of 4 t lashing rings on both gooseneck and rear unit)
- 6 pairs of mushroom-type lashing points in the outer frame in the drop deck
- Storage compartment with lid in the front left and right of the drop deck floor
Front Wall:
- 25 mm aluminum hollow profiles raised to the lower edge of the roof with integrated tarpaulin tensioning system
Sliding Tarpaulins:
- Sliding curtain both sides with welded-in vertical and horizontal straps (approx. 600 mm spacing) and stainless-steel tension locks
- Adjustable curtain straps (over-center) for loading width up to 4,000 mm including curtain extension with press studs and Velcro fastener
- Curtain extension in driving direction: 300 mm, in height: 750 mm
- Incl. eyelets for loose curtain extension part
- 1 pair of vertical curtain pockets approx. 1,000 mm length, positioned in the drop deck at the front cranking
- With belt pockets
Rear Wall:
- Steel rear portal frame with side tarpaulin hook-in device
- Aluminum double-wing door, 25 mm thick
- Both door wings fully foldable with door retainer
- One aluminum double-joint hinge and two recessed grip recesses per door wing
Front Corner Posts:
- At roof height, bolted at the front end
Central Posts:
- 3 pairs of continuously adjustable folding stanchions
- Stanchions can be moved along the entire length via trolleys
- Central stanchions in the drop deck can also be fixed at the rear platform
Roof:
- EDSCHA sliding roof (galvanized) with crossbeams that can be shifted in both directions (pushed together to the front in the cargo area)
- Rear portal cross member can be swiveled away
- PVC tarpaulin roof without customs seal
- Hand-operated hydraulic lifting roof on both sides, lift 450 mm
- Raised roof movable to the front (9x50) and rear (9x50) positions
- Including rear curtain extension and curtain skirt
- Roof can be cranked out at the very front on the bulkhead by 900 mm each
Accessories:
- Extendable warning boards (removable front and rear with socket) incl. position lights up to 4,000 mm loading width
- Storage for 4 warning boards on the front wall, top right and left inside
- 1 aluminum ladder with bracket, 2,500 mm long, mounted on the front wall
- 2 rows of self-locking aluminum slats
- Sheet metal fenders with mud flaps
- 1 night parking sign and 1 ADR panel on the rear wall
- Central lub
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMT 6-2+4-Achs-Tiefbett-Kombination
Ara
Durum: yeni, boş ağırlık: 29.600 kg, azami yük ağırlığı: 72.400 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 6.650 mm, yükleme alanı genişliği: 2.840 mm, yükleme alanı yüksekliği: 550 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 29.600 kg, Donanım: ABS, Gooseneck:
- Gooseneck hydraulically liftable/lowerable and detachable
- Length approx. 3,650 mm
- For tractor units: 6 x 4 or 8 x 4
2-Axle Front Bogie:
- Hook pick-up at front and rear
- Chassis length x chassis width approx. 2,200 mm x 2,850 mm
Excavator Deck 'BB-A':
- Telescopic excavator deck 'BB-A' with drive-over bridge hooks at the front and bolt-eye coupling at the rear
- Length x base width approx. 6,650 mm x 2,850 mm
- Beam height x beam width approx. 400 mm x 1,350 mm
- Loading height 550 mm with ground clearance 150 mm
4-Axle Rear Bogie:
- Mechanical bolt-eye coupling for connecting a low-bed at the front, rear cross member at the back
- Bogie length x bogie width approx. 5,480 mm x 2,850 mm
- Numerous lashing points
Pendulum Axle and Tyres (Front and Rear Bogie):
- "PENDULUM AXLE", all axles hydromechanically forced-steered
- Burst hose valve on axle compensation cylinders with automatic reset function
- Hydraulic cylinders with shut-off valves and locking pins to secure in raised position
- Final paint of axles with double-layer 2-component paint in MB 7350 Novagrau, single-color finish
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tyres: 285/70 R19.5
Remote Steering:
- Steering from front and rear via cable remote control with push-buttons, including single-track alignment monitoring
- Socket for remote steering operation on the gooseneck
- Cable remote control with push-buttons including single-track alignment monitoring
Included Accessories:
- At the galvanized connection bar at the front: yellow-red air couplings
Gbjdpfx Aswcmhasqton
- Steel front wall approx. 400 mm high
- 4 wheel chocks
- 3.5" kingpin
- One 7-pin socket at left and right rear of the gooseneck for warning signs
- Support bracket with winch for spare wheel at the front of the gooseneck
- Truck hydraulic connection with flow controller (40 l/min), including bracket for suspension of supply lines; tractor unit tank must be at least 80 liters with couplings
- Plug-in ALU side and tail boards on the gooseneck, approx. 400 mm high, anodized
- Control lever on the gooseneck protected by a fold-down cover
- Separate air connection with air gun on the gooseneck
- Central lubrication system BEKAMAX, 1x on the gooseneck, 1x on the 2-axle bogie, and 1x on the 4-axle bogie
- Variomax tool kit
- Multi-coupling hydraulic connections on the gooseneck and in the area of the low-bed hook-up
- 2 spare wheels
- One 7-pin socket left and right, at the front and rear end of the rear bogie for the warning sign
- Front bogie with separate air connection for air tools
- Foldable extensions with steel deck inserts, width adjustable from approx. 2,850 mm to approx. 3,250 mm
- Steel deck inserts can be placed in 2 positions to create a lowered loading area
- Steel mats with 12 mm thick rubber surface
- Screw-in option (⌀ 40 mm) every approx. 500 mm on the outside flange of the outer tube of the excavator deck for lashing rings
- One locking position every approx. 500 mm at the extension with mechanical lock
- Socket for cable remote control of the remote steering at the rear bogie
- 2 reversing lights on the rear panel
- Four warning signs extendable by approx. 2,000 mm approx. 423 x 423 mm with a position light
- 1 work light left/right on the rear panel of the gooseneck with separate on/off switch
- Two INOX toolboxes approx. 855 x 340 x 390 mm
- 1-cylinder Hatz diesel engine (Silent Pack)
- Wireless remote control for the remote steering
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-A-S-hyd.Ladebo.-hyd.Rampen
Ara
Durum: yeni, boş ağırlık: 10.300 kg, azami yük ağırlığı: 39.200 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck with rear chamfer approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Loading Area:
- Loading area after the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8°
- Cut-outs in the outer frame of the loading area for securing tension straps (LC 2,000 daN)
- Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles
Two-part Steel Ramps:
- One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering
- Ramps with hydraulically folding and unfolding ramp sections, hydraulic lifting mechanism, and hydraulically adjustable
- Maximum load per pair: 40,000 kg
Axles, Suspension and Tyres:
- BPW axles and suspension, 2 axles rigid, 1 axle trailing steer
- Technical axle load: 12,000 kg
- Electro-magnetic reverse lock, activated via reverse gear and manually
- Air suspension with lift and lowering valve
- Axle tools
- Tyres 235/75 R 17.5 3PMSF
- TPMS tyre pressure monitoring system according to ECE R 141
Included Accessories:
- One spare wheel with holder in front of the bulkhead
- 2" kingpin
- One galvanized steel front wall approx. 400 mm high
- Yellow-red air couplings at the galvanized connection rail at the front
- 4 wheel chocks
- Galvanized folding supports under the chamfer of the loading area
- One holder for a beacon at the rear of the trailer
- Cover plates to bridge the gap between the ramps and the loading area
- White reflective tape according to EU regulations on the sides of the trailer and red on the rear
- Electro-hydraulic unit at the rear, under the loading area
- Holder for warning signs left and right on the gooseneck and ramps, including socket
- Control valves for the ramps located on the right side of the trailer
- European reflective boards (red-yellow) at the rear of the trailer
- Manual and description on USB stick
- On the gooseneck, ALU drop-in side boards and rear wall approx. 2,440 x 400 mm
- The rear, galvanized drop-in stakes are removable (length of superstructure approx. 2,560 mm)
- An electric cable winch with radio remote control, approx. 5,400 kg lifting force, including 9.5 mm thick steel cable, 24 m long with cable guide roller
- Bolted 5t ring for running the winch cable on the gooseneck without pulley
- 2 pairs of WADER container pockets in the loading area for one 20ft container
- 6 pairs of stake pockets for drop-in stakes 100 x 50 mm in the outer frame of the loading area
- Lift axle on the front axle controlled by TEBS E depending on the current axle load and load status
- 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN)
- 1 pair of recessed lashing rings along the central beam at the rear in the chamfer (LC 10,000 daN)
Godeu Hp Hrepfx Aqtobn
- On the chequer plates on the gooseneck and the loading area, painted sand layer as slip resistance
- BEKAMAX centralized lubrication system (Pico) with standard grease NLGI-2 and removable guard for the pump
- Four warning boards extendable by approx. 400 mm, size approx. 423 x 423 mm
- 80 km/h speed stickers at the rear and on both sides
- Load gauge to determine axle loads, including load diagram
- HRM metallization (High Resistance Metallization) of the outer frame
- Complete steel structure shot blasted, then defined visible surfaces hot-coated in metallization with ZINACOR 850 (85% zinc - 15% aluminium)
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
Faymonville3-Achs-Semi-hydr.Ladeboden-Rampen-Gitter
Ara
Durum: yeni, boş ağırlık: 10.900 kg, azami yük ağırlığı: 37.100 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear with approx. 1,000 mm x 6° chamfer
- Technical fifth wheel load: 18,000 kg
- For tractor units: 4 x 2 and 6 x 2
Loading Platform:
- Loading area, approx. 9,600 mm long, with chamfer at the rear approx. 900 mm x 6°
- Loading area behind the gooseneck hydraulically raiseable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg
- Grating surface and approx. 5 mm steel plate as additional reinforcement on the chamfered section of the loading area
Ramps:
- One pair of two-piece AXS steel ramps, approx. 4,675 mm long, approx. 900 mm wide
- Grating surface
- Hydraulically folding ramp tips
- Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 365 mm inwards
- Painted sand coating on the outer frame of the ramp as well as on the ramp tip
- Flashing lights on the outer side of the ramp tips with switch next to the ramp control
- Ramp locking in transport position with quick-release fastener
Axles, Suspension and Tyres:
- BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle self-steering
- 1st axle with starting aid
- Operated via the brake pedal of the tractor unit
- Technical axle load: 12,000 kg
- Air suspension with lift and lower valve
- 235/75 R 17.5
- TPMS tyre pressure monitoring system according to ECE R 141
- TPMS tyre pressure sensors fitted on all wheels including spares
Brake System:
- WABCO EBS-E braking system according to EU regulations
Paintwork:
- Trailer painted MB 7350 Novagrau grey
Accessories Included:
- Plug-in steel front wall, approx. 400 mm high
- 3 kW electric hydraulic power pack for controlling hydraulic operations, except hydraulic winches
- Guide plate from gooseneck for the fifth wheel plate, approx. 500 mm wide
- JOST Module B – static test load = 50,000 kg
- Continuous grating surface with 5 mm steel plate underneath as additional reinforcement
- Painted sand coating
- Cut-outs in the outer frame of the loading platform and lifting bed for attaching hydraulic ramp control valves on the right side of the vehicle
- 2" king pin
- Central lubrication system with one pump, brand BEKAMAX
Gjdpfx Aouadk Neqtjbn
- On gooseneck, 1 pair of plug-in side ALU folding walls, approx. 400 mm high, anodized
- Electric cable winch, approx. 5,400 kg pulling force, with radio remote control
- Steel rope approx. 24 m long, rope ø approx. 9.5 mm, incl. rope press roller
- WABCO Smart Board system
- 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
Faymonville4-2+2-Achs-Tele-Semi m. Radmulden u. Rampen
Ara
Durum: yeni, boş ağırlık: 13.500 kg, azami yük ağırlığı: 51.500 kg, toplam ağırlık: 69.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r17.5, renk: gri, Donanım: ABS, Gooseneck:
Gooseneck in SNT design for optimization of loading area length, length approx. 3,700 mm
Gooseneck rear with bevel approx. 1,000 mm x 10°
Godpfxek Ahugs Aqtsbn
Loading Area:
Telescopic loading area, length approx. 8,800 mm, with rear incline approx. 500 mm x 10°
Recess in the incline and extending into the loading area for accommodating the excavator dipper stick
Pneumatic locking with conical pin and reinforced locking positions
The supply lines are protected within the extendable beam and adjust to the respective loading area length
Ramps:
1 pair of two-piece steel ramps, approx. 4,350 mm x 900 mm
Hydraulically folding ramp tips
Ramps can be hydraulically adjusted individually approx. 235 mm outwards and 215 mm inwards
Axles and Suspension:
BPW axles and suspension, two fixed axles, two steering trailing axles
Electromagnetic reverse lock activated via reverse gear and manually
Air suspension with lifting and lowering valve
Axle tool
Tyres: 235/75 R17.5 3PMSF twin tyres
Load index: 143/141J (144/144F)
Brake System:
WABCO brake system, EBS-E according to EU regulations
Lighting System:
24-volt lighting system, “ASPÖCK-NORDIK full LED”
Metallization:
Standard HRM metallization of the external frame
Complete steel structure shot blasted, subsequently visible defined surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-finished
Steel Structure:
Steel grades:
S355J2+N/S355MC (yield strength 355MPa)
S690QL/S700MC (yield strength 690MPa)
Welders certified according to DIN-EN 287-1
MAG welding process according to EN ISO 4063
Shielding gas M21 according to EN ISO 14175
Included accessories:
Removable steel front wall, height approx. 400 mm
ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets
24N connection according to ISO-1185
24S connection according to ISO-3731
15-pin connection according to ISO-12098
Round NATO socket on the front connection strip
Cable for supplying the electro-hydraulic pump and/or electric winch (35 mm², 3.5 m long) between trailer and tractor unit with plug (NATO-NATO)
3 kW electro-hydraulic unit for controlling hydraulic operations (except for hydraulic winches)
1 spare wheel with mounting adapter
External beams on the gooseneck with mounting holes for bolt-on lashing rings, first hole approx. 200 mm from the front, then approx. every 400 mm
2 pairs of screw-in lashing rings included
Mounting hole on the upper rear of the gooseneck external beam for a screw-on lashing ring
1 pair screw-in lashing rings
Approx. 40 mm thick hardwood floor above gooseneck
On the gooseneck, 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized
On the gooseneck, one plug-in aluminium rear wall, approx. 400 mm high, anodized
2" king pin
Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide
4 wheel chocks with holders
Provision for aluminium approach ramps
Mechanical landing gears with 2-speed gearbox and crank
On the loading area, continuous hardwood floor approx. 50 mm thick, interrupted only between the axles
Load area locking with conically welded positioning profiles every 250 mm including pre-tension plate
Slotted holes at the front of the loading area for attachable and repositionable bridging plates
1 intermediate table with recessed loading area, approx. 300 mm wide, for the large cross-section sliding tube with sheet metal covering
Front and rear with longe...
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tiefbett mit Pendelachsen
Ara
Durum: yeni, boş ağırlık: 17.500 kg, azami yük ağırlığı: 43.500 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 400 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimizing the loading platform length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and removable
- For tractor units: 6x4 or 8x4
Lowbed:
- Lowbed with external beams, extendable version, “SUPER LOW” design, length approx. 7,550 mm
- Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking
- Supply lines routed protected inside the extendable beams and automatically adjust to the respective lowbed length
Rear running gear:
- Rear running gear with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at rear
- 2 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame
Axles and tyres:
- “PENDLE-AXLE”, all axles forced-steered by hydromechanics
- Burst protection valve on axle compensation cylinder with automatic RESET feature
- Hydraulic cylinders with shut-off valves and locking pins for securing in raised position
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- 245/70 R 17.5 tyres / 3PMSF
Accessories included:
- Prepared for mounting attachable container positions for 1x 20ft or 1x 40ft container on the outer beams
- 2'' king pin
- One galvanized steel front wall approx. 400 mm high
- One spare wheel with bracket
- At the galvanized front connection strip: yellow-red air couplings
- 4 wheel chocks
- Remote steering from front and rear by cable remote control with push buttons, including track alignment monitoring for the axles
- Hydraulic couplings from gooseneck to lowbed with multi-coupling system instead of screw couplings
Gbjdpfeh Hm Thex Aqtsn
- Electro-hydraulic unit
- White reflector tape according to EU regulations on the sides, extension, and red at the rear
- 2 wooden blocks 500x250x200 mm
- European reflector plates (red-yellow) at the rear of the trailer
- On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket
- Central lubrication system with 2 BEKAMAX (Pico) pumps for NLGI-2 standard grease
- Load pressure gauge to determine axle loads, including load chart
- On the gooseneck, plug-in ALU side and rear walls approx. 2,000 x 400 mm
- The rear galvanized plug-in posts are removable (body length approx. 2,120 mm)
- Separate air connection with air gun on the gooseneck
- Duomatic air coupling from gooseneck to lowbed
- Gooseneck closed at the rear upper section with a removable cover
- 1 pair of steel ramps to bridge the mountings of the lowbed
- Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm
- Radio remote control for the steering in addition to the cable remote, with indicator lights on receiver for track monitoring
- 6 pairs of threaded blocks between lashing rings under the top chord on the outer beam for mounting screwable RUD rings VLBG-4
- 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform
- Folding extensions, approx. 230 mm per side
- Anti-slip sand layer painted on the loading platform
- Dipper recess on the rear running gear closed at the front and rear with plug-in plates
- HRM metallization (High Resistance Metallisation) of the outer frame
- Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (Zinc 85% - Alu 15%)
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
FaymonvilleMAX Trailer 4-Achs-Tele-Semi-Rampen-nlla
Ara
Durum: yeni, azami yük ağırlığı: 49.000 kg, toplam ağırlık: 60.800 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r 17.5, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Extendable Loading Platform:
- Loading platform in extendable design with rear taper approx. 1,000 mm x 8°
- 5 pairs of outward folding lashing rings (LC 5,000 daN)
- 3 pairs of outward folding lashing rings (LC 10,000 daN)
- 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN)
- Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN)
- c. 48 mm thick hardwood flooring, over the axles with checker plate covering
Detachable Two-Part Ramps:
- One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering
- Ramps with hydraulically folding ramp sections, hydraulic lifting unit and hydraulically adjustable
- Maximum load per pair: 40,000 kg
Landing Legs:
- JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load)
Axles and Tyres:
- BPW axles, two rigid axles, two steering trailing axles, air suspension, with drum brakes, with raise/lower function
- The trailing steering axles can be locked electromagnetically via reverse gear or manually
- Axle tools
- Tyres: 235/75 R 17.5
Brake System:
- Brake system according to EU regulations with EBS-E (4S3M)
Steel Construction:
- Steel construction made of high-tensile fine-grained steels
- Steel grades:
- S355J2+N/S355MC (yield strength 355 MPa)
- S690QL/S700MC (yield strength 690 MPa)
Paintwork:
- First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer
- High-quality 2-component (2K) top coat finish in single-colour Novagrau
Electrical System:
- Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
- ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin sockets
Accessories Included:
- 2" king pin
- One galvanized steel front wall approx. 400 mm high
- One spare wheel with holder in front of the headboard
- Yellow-red air couplings at the galvanized front terminal strip
- 4 chocks with holder at the front wall
- Mounting at the rear area of the gooseneck for ALU drive-on ramps
- Galvanized folding supports under the taper of the loading platform
- Bracket for a rotating beacon
- Cover plates to bridge the gap between ramps and loading platform
- White reflector tape to EU specification on the sides, red at rear and on extension
- Electro-hydraulic power pack
- On both sides of the gooseneck and ramps, mounting brackets for warning signs incl. socket outlet
- Ramp control valves installed on the right trailer side
- One mudguard at the rear of the trailer
- Instruction manual and description on USB stick
Gedjh Etf Repfx Aqtobn
- ALU side walls and end wall, plug-in, on gooseneck approx. 2,440 x 400 mm
- The rear galvanized plug-in posts are removable (length of structure approx. 2,560 mm)
- 4 pairs of WADER container pockets in the loading platform for one 20ft, 2x 20ft or one 40ft container
- 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform
- Extensions, galvanized, extendable by approx. 230 mm per side
- Lift axle on the front axle with control
- Square climbing rails 20 x 20 mm
- Central lubrication system BEKAMAX
- F
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
FaymonvilleMAX Trailer 2-Achs-Tiefbett mit Pendelachsen
Ara
Durum: yeni, boş ağırlık: 12.900 kg, azami yük ağırlığı: 34.100 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 350 mm, süspansiyon: diğer, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 12.900 kg, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimized loading area length, approx. 3,750 mm long
- Gooseneck hydraulically height-adjustable and detachable
- Technical fifth wheel load: 23,000 kg
- Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4
Loading Platform:
- Low bed with external beams in extendable "SUPER LOW" design, length approx. 6,850 mm
- Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking
Rear Chassis:
- Rear chassis with closed outer frame, checker plate covering and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear
- 2 pairs of lashing rings foldable outward
- 1 pair of lashing rings lying in the trough
- 2 pairs of stake pockets for plug-in stakes (100 x 50 mm) in the outer frame
Pendulum Axle and Tires:
- "PENDULUM AXLE", all axles hydromechanically forced-steered
- Hose rupture valve on axle compensation cylinder with automatic RESET function
Gbedpfx Aqohlz R Setjn
- Hydraulic cylinders with shut-off valves and pre-insert to secure in lifted position
- Final coating of axles with 2 layers of single-color 2K paint, painted in "FAY-Grey-34-0260"
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tires 245/70 R17.5
- TPMS (Tire Pressure Monitoring System) compliant with ECE R 141
Accessories:
- Prepared for fitting of bolted container locking positions for 1x 20ft or 1x 40ft container on the external beams
- 2" kingpin
- Galvanized steel front wall approx. 400 mm high
- One spare wheel
- On the galvanized connection strip at the front: yellow-red air couplings
- 4 wheel chocks
- Remote steering front and rear operable via cable remote control with push buttons, including single-track monitoring of the axles
- Hydraulic connections from gooseneck to low bed with multi-coupling instead of threaded couplings
- Electro-hydraulic unit
- White reflector tape on sides, extension and rear, according to EU regulations
- European reflector panels (red-yellow) at the rear of the trailer
- At the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket
- 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting of bolt-on RUD rings VLBG-4
- Removable ALU side walls and rear wall on the gooseneck, approx. 2,440 x 400 mm
- Rear galvanized plug-in posts are removable (body length approx. 2,560 mm)
- Gooseneck at the upper rear area closed with a removable cover
- 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform
- Fold-out extensions, approx. 230 mm per side
- 2 pairs of bolt-on RUD rings VLBG-4 M24 (LC 8,000 daN)
- 1 pair of steel ramps for bridging the low bed’s mounting hooks
- Sanded layer painted on the loading platform as an anti-slip coating
- Speed stickers 80 km/h on rear and both sides
- Rear chassis’ bucket recess at the rear closed with a plug-in plate
- Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm
- Radio remote control for the rear steering, in addition to the cable remote control, with indicator lights on the receiver as single-track monitoring
- Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2
- Load gauge for determining axle loads
- HRM (High Resistance Metallisation) of the outer frame
- Complete steel construction shot-blasted, then all defined visible surfaces hot-finished in metallization with ZINACOR 850 (Zinc 85% - Alu 15%)
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 4-Achs-Jumbo-Semi mit Plane
Ara
Durum: yeni, azami yük ağırlığı: 38.100 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 13.100 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5 3PMSF, renk: gri, Donanım: ABS, Gooseneck:
Gooseneck with rear chamfer approx. 750 mm x 10°
3 pairs of lashing rings
30 mm thick hardwood flooring
Loading Platform:
5 pairs of fold-out lashing rings on the outside
3 pairs of fold-out lashing rings on the outside
1 pair of horizontal lashing rings at the front end of the platform
Cut-outs in the outer frame of the loading platform for attaching tension straps
Approx. 48 mm thick hardwood flooring, checker plate flooring above the axles
Landing Gears:
JOST landing legs with 2-speed gearbox, lifting capacity 24 t
Axles and Tyres:
BPW axles, two fixed axles, two steered trailing axles, air suspension, drum brakes, raise/lower function
Trailing steering axles with electro-magnetic reverse lock, activated via reverse gear or manually
Axle tool
Godpetphtmsfx Aqtsbn
Tyres 205/65 R17.5 3PMSF
Brake System:
WABCO brake system according to EU regulations, with EBS-E
Steel Construction:
High-strength fine-grained steel construction
Steel Grades:
S355J2+N/S355MC
S690QL/S700MC
Electrical Equipment:
Electrical system according to EU regulations, lighting: 24 Volt ASPÖCK-NORDIK
ASPÖCK-UNIBOX at the front connection panel, with 24N, 24S & 15 pin sockets
Connections according to ISO
Paintwork:
First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by 2-component zinc-dust primer
Premium 2-component topcoat, single colour in MB 7350 Novagrau
No metallic finish possible
Rear section metallized and painted RAL 9010
Accessories Included:
1 spare wheel 205/65 R 17.5
TPMS tyre pressure monitoring system according to ECE R 141
Galvanized front connection bar with yellow-red air couplings
4 chocks with holder at the front wall
Mounting at rear of gooseneck for ALU loading ramps
Galvanized folding supports under the loading platform’s rear chamfer
Holder for a warning beacon at the rear of the trailer
Height-adjustable tarpaulin superstructure
Galvanized front wall with tensioning mechanism for sliding curtains
Height-adjustable by approx. 400 mm
Roof brand "EDSCHA" sliding forward on ALU roof support profiles, screwed front and rear walls
On platform: 3 pairs of adjustable stanchions
Rear of superstructure can be hydraulically widened left and right by approx. 750 mm
Sliding roof with upward swinging portal beam
Sliding tarpaulin with 700 mm length reserve, securing straps at approx. 600 mm intervals
Height upper edge of superstructure approx. 3,960 mm
Driving with open sliding roof is not permitted and will damage the tarpaulin
Suspension rail for ALU loading ramps at the rear of the vehicle
At the gooseneck and at the left and right rear panel: each with a bracket for warning boards including socket
Mudflap at the rear of the trailer
European reflector boards at the rear of the trailer
7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform
Lift axle on the front axle with TEBS E control, depending on current axle load and loading status
Rear of superstructure with closed ALU wing doors
Anti-slip sand finish painted on checker plates on gooseneck and platform
Central lubrication system BEKAMAX, standard grease NLGI-2, removable protective cover for pump
80 km/h speed sticker at rear and on both sides
Load gauge for axle load determination including load chart
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FAYMONVILLE5-Achs-Doppel-Tele-Semi-Sattelauflieger
Ara
Durum: yeni, boş ağırlık: 15.450 kg, azami yük ağırlığı: 65.550 kg, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 21.900 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 925 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck:
Gooseneck in SNT design for optimised load platform length, approx. 3,700 mm long, rear section with incline approx. 1,000 mm x 10°. Technical fifth wheel load: 30,000 kg. Compatible with tractor units: 4x2, 6x2, and 6x4.
Loading Platform:
Double-extendable loading platform, approx. 8,800 mm long with rear incline approx. 500 mm x 10°. A central support beam features a welded-on support table approx. 300 mm wide, with elongated holes at the front and rear for optional bridging elements that can be hooked in and repositioned.
Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length.
Axles and Tyres:
BPW axles and suspension, first axle steered passively, all other axles with hydro-mechanical forced steering. The first axle is equipped with an electro-magnetic reverse lock, activated via reverse gear or manually. Technical axle load: 12,000 kg. Air suspension with lift and lower valve. Manufacturer at our discretion.
Sockets and Lighting:
Gbodpfx Aorigw Roqton
24-volt lighting system in accordance with EU regulations. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. Complete HRM metallisation. Entire steel construction shot-blasted, then hot-dip refined with ZINACOR 850.
Paint Finish:
6-step final treatment: Complete steel structure shot-blasted after welding. One coat of zinc-based primer, one coat of bonding primer. Final paint finish with two layers of single-colour 2-pack paint in DB 7350 Novagrey, followed by cavity sealing with special wax.
Accessories:
Plug-in steel front wall, approx. 400 mm high. Supply line connection bar to tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. If your pin configuration differs from ISO standards, please notify us.
3 kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches. On the gooseneck, 1 pair of plug-in ALU side walls, approx. 400 mm high, anodised finish. 3.5" kingpin. Gooseneck guide plate for the fifth wheel, approx. 500 mm wide.
2 wheel chocks with mounting bracket in front of the front wall. Mechanical landing legs with 2-speed gearbox and crank. Control valves for hydraulic ramps on the right side of the vehicle.
1 pair of mechanical rear supports. Central lubrication system with 1 pump (BEKAMAX brand) using normal grease (NLGI-2 standard).
Removable protection for the central lubrication pump(s). Remote axle steering from the front and rear by cable remote control using push-buttons, with single-track control, without installation in the tractor unit.
Under the gooseneck and at the rear end cross-member, left and right, one 7-pin socket with bracket for warning boards. One 7-pin socket at the rear end cross-member. Operating manual and documentation included.
One one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm, straight version.
Please note that special equipment and accessories will usually increase the unladen weight and accordingly reduce the payload capacity.
Warning package: 4 warning boards, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and mounting brackets for beacon.
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 8-(3+5)-Achs-Tiefbett-Kombi.
Ara
Durum: yeni, boş ağırlık: 34.500 kg, azami yük ağırlığı: 106.700 kg, toplam ağırlık: 141.200 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 7.150 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 580 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 34.500 kg, Donanım: ABS, Gooseneck:
- Hydraulic gooseneck, height-adjustable and detachable
- Length approx. 3,650 mm
- Numerous lashing points
- For tractor units: 6x4 or 8x4
3-Axle Compact Front Bogie:
- Hook mounts at the front and rear
- Bogie length x width: approx. 3,560 mm x 2,850 mm
- Numerous lashing points
Excavator Deck "BB-A":
- Telescopic excavator deck "BB-A" with drive-over bridge hooks at the front and bolt-eye coupling at the rear
- Length x base width: approx. 7,150 mm x 2,850 mm
- Beam height x width: approx. 430 mm x 1,350 mm
- Loading height 580 mm with ground clearance of 150 mm
- 5 pairs of drop-forged lashing rings (LC 10,600 daN)
- 4 pairs of M30 threaded inserts on the inner beam for mounting bolt-on rings
5-Axle Rear Bogie:
- Mechanical bolt-eye coupling for mounting a lowbed at the front, rear cross member at the back
- Bogie length x width: approx. 6,840 mm x 2,850 mm
- Numerous lashing points
Pendulum Axles and Tires (Front and Rear Bogies):
- "PENDEL-AXLE", all axles with hydromechanical forced steering
- Hose rupture valve on equalizing cylinder with automatic reset
- Hydraulic cylinders with shut-off valves and safety lock pins for securing in raised position
- Axles finished with two coats of 2K paint, single-color MB 7350 Novagrau
- Technical axle load: 14,640 kg (62 km/h)
- Hydraulic axle compensation
- Axle tools
- Tires: 285/70 R19.5
Remote Steering:
- Remote steering operational from front and rear via cable remote control with push-buttons, including axle tracking monitoring
- Socket for operating the remote steering on the gooseneck
- Cable remote control with push-buttons and axle tracking monitoring included
Accessories Included:
- Galvanized front connector bar with yellow-red air couplings
- Steel front wall approx. 400 mm high
- 4 wheel chocks with brackets
- 2 spare wheels 285/70 R19.5
- 3.5" king pin
- Gantry with winch for spare wheel on the front of the gooseneck
- Truck hydraulic connection with flow regulator (40 l/min), including gantry for suspending supply lines; tractor tank must have minimum capacity of 80 liters, complete with couplings
- White reflective tape to EU specs on the sides and extensions, red at the rear
- Plug-in ALU side and rear panels on the gooseneck, approx. 400 mm high, anodized
- Gooseneck operating lever protected by a folding cover
- Separate air connection with air gun on the gooseneck
- Central lubrication system BEKAMAX with multipurpose grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle bogie, 1x at the 5-axle bogie
- Variomax tool kit
- Multi-couplings for hydraulics in the area of the lowbed hook mounts
- Front bogie with separate air connection for pneumatic tools
- Thread inserts (ø 40 mm) every approx. 500 mm on the external upper flange of the excavator deck for bolt-on rings
- Foldable extensions with steel decks, adjustable in width from approx. 2,850 mm to 3,250 mm
- Steel decks with approx. 12 mm thick rubber surface
- Two INOX toolboxes 855 x 340 x 390 mm
Gbedpowhywfjfx Aqtsn
- Wireless remote control for remote steering in addition to cable control
- Slip-resistant sanded surface coating
- Single-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
Meusburger3-Achs-Semi mit 2 Paar Radmulden
Ara
Durum: yeni, boş ağırlık: 8.490 kg, azami yük ağırlığı: 40.510 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.490 kg, Donanım: ABS, Chassis:
- Robust welded steel frame construction with front frame drop and level loading area, rear taper approx. 500x100 mm
- Neck height 200 mm with beveled corners
- Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper)
- 2 king pin positions with interchangeable 2” king pin
- Outer frame closed on the outside as a perforated outer frame for lashing with tie-down straps
- Reinforced frame design / point load at the center of gravity
- Prepared for extendable load width extensions
- With excavator recess (open type), depth approx. 220 mm, width approx. 600 mm, beginning just after 2nd axle to end of vehicle
- 1 pair of wheel recesses in front of axle with steel covers
- (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers
- Rear underrun protection = extended end plate
- Drop-leg stabilizers at rear
Floor:
- 35 mm larch wood floor with aluminum omega profiles
Axles, Steering, and Tires:
- BPW air suspension axles, each with 10 t axle load, air bellow diameter 360 mm
- S-cam brakes 300/200 mm, asbestos-free brake linings
- Automatic slack adjuster
- Lift and lowering mechanism, total travel approx. 200 mm
- 2nd ride height setting via ball valve +50 mm
- 1st axle lift axle (wired via EBS), confirmation fully automatic with mechanical emergency operation via pushbutton on trailer
- 3rd axle is a friction-steered trailing axle with electric and mechanical lock
- 12 steel disc wheels, 10-hole, with centered offset
- 12 tires 245/70 R 17.5 143/141J, tubeless
- Including tire pressure monitoring
Brake System:
- Dual-line brake system with EBS-E including RSS
- EBS (WABCO 4S3M)
- Spring-loaded parking brake
- Air connections yellow / red
Paintwork:
- Steel shot blasting, chassis spray galvanizing and priming
- Painting of chassis/hub/outer frame in DB 7350 Novagrau
Accessories:
- Removable drop sides and tailboard on gooseneck, approx. 400 mm high
- Spare wheel holder
- Side aluminum underrun protection
- 4 wheel chocks
- Metal mudguards with Clear-Pass
- Long number plate holder integrated in end plate
- 1 removable ECE plate at rear
- 11 pairs of ZK-modules 10t side-mounted:
- 2x on the gooseneck
- 9x on the loading area
- Without rear towing eyes
- Extendable warning signs incl. 3 position lamps each, at the front at landing gear and rear before end plate, infinitely extendable to a loading width of 4,500 mm
- 4 holders for warning signs, insertable in stake pockets on loading area
- 6 pairs of side stake pockets for insertable stanchions 100x50 mm
Gbodpfx Aqewu A Sleten
- 2 cross rows of stake pockets for insertable stanchions 100x50 mm on gooseneck, from outer frame to main frame (1x before and 1x after king pin positions)
- 3 cross rows of stake pockets for insertable stanchions 100x50 mm on loading area, from outer frame to main frame (1x at the front area, 1x before 1st axle, 1x after 3rd axle)
- 2 pairs of steel plates in loading area for container locks to accommodate one 20ft container
- Rubber apron mounted on underrun protection
- Preparation (wiring for NATO cable and hole pattern for retrofit installation of NATO socket at front of end plate and bracket on vehicle) for subsequent installation of an electrohydraulic unit on the right rear side for possible ramp operation
- Mechanical landing legs 24t, single-sided operation with load compensation
Optionally, the trailer is available with aluminum approach ramp
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 4-Achs-Mega-Tele-Semi-niedri
Ara
Durum: yeni, boş ağırlık: 10.600 kg, azami yük ağırlığı: 39.400 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, işletme ağırlığı: 10.600 kg, Donanım: ABS, Swan-neck:
- Swan-neck with 30 mm thick hardwood flooring
- Swan-neck at the rear in straight design
- 3 pairs of lashing rings (LC 5,000 daN)
Extendable loading platform:
- Loading platform in extendable version
- 5 pairs of fold-out lashing rings
- 3 pairs of fold-out lashing rings
- 1 pair of horizontal lashing rings at the front of the loading platform
- Cut-outs in the outer frame of the loading platform for attaching tension belts
- Hardwood flooring approx. 48 mm thick, checker plate covering above the axles
Landing legs:
- JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Axles and tyres:
- BPW axles, two fixed and two steering axles
- Air suspension, drum brakes, with lift/lower function
- The steering axles can be locked electro-magnetically via reverse gear or manually
- Axle tools
- Tyres: 205/65 R17.5
Brake system:
- Brake system according to EU regulations with EBS-E (4S3M)
Steel construction:
- Steel structure made of high-strength fine-grain steels
- Steel grades:
- S355J2+N/S355MC (yield strength 355 MPa)
- S690QL/S700MC (yield strength 690 MPa)
Electrical system:
- Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3)
- ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets
- Connections according to ISO:
- 24N ISO-1185
- 24S ISO-3731
- 15-pin ISO-12098
Paintwork:
- First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer
- High-quality 2-component (2K) top coat, single colour in Nova grey
- Rear section metallized and painted in RAL 9010 (pure white)
Included accessories:
- One spare wheel with holder located in front of the bulkhead
- 2" king pin
- Galvanized steel front wall approx. 400 mm high
- Yellow-red air couplings on the front galvanized connection strip
- 4 wheel chocks with holder at the bulkhead
- Galvanized folding supports under the sloped part of the loading platform
- Holder for rotating beacon at the rear of the trailer
- Galvanized, extendable width extensions approx. 230 mm per side
- White reflective tape according to EU regulations on sides, at extension section, and red at rear
- On swan-neck and rear panel: one mount each for warning panels including socket (left and right)
- European reflective warning boards (red-yellow) at the rear of the trailer
- TPMS tyre pressure monitoring system in accordance with ECE R 141
- On the swan-neck: removable ALU side panels and tailboard approx. 2,440 x 400 mm
- The rear, galvanized stanchions are removable (length of superstructure approx. 2,560 mm)
Gbsdpfjt Ag Uwjx Aqtsn
- 7 pairs of WADER container locks
- 1x 20ft container on the loading platform; 1x 40ft container on the loading platform; 1x 40ft container over the swan-neck; 2x 20ft containers
- 7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading platform
- Lift axle at the front axle, controlled by TEBS E in relation to current axle load and loading status
- Sliding hook-in rail for ALU loading ramps at the rear of the vehicle
- Sanded, anti-slip coating painted onto checker plate on swan-neck and loading platform
- Four warning panels extendable by approx. 400 mm each, approx. 423 x 423 mm, with a position lamp
- Mount for rotating beacon on warning panels
- Speed stickers 80 km/h at the rear and on both sides
- Load gauge to determine axle loads, including load chart
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
Faymonville6-Achs-Tele-Semi mit PA-X Achssystem
Ara
Durum: yeni, boş ağırlık: 22.700 kg, azami yük ağırlığı: 79.300 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 11.000 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 920 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 22.700 kg, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimized loading deck length, approximately 3,750 mm long, with rear tapering of about 850 mm x 10°
- Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles
- Open in the rear third
- For tractor units: 6x4 and 8x4
Loading Platform:
- Extendable loading platform, length approx. 11,000 mm with rear taper approx. 500 mm x 10°
- A recess in the platform and into the taper for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm
- Pneumatic locking with conical locking bolt and reinforced locking positions; supply lines are protected in the extendable beams and automatically adapt to the respective platform length
Ramps:
Gbjdpfx Ask Af Sveqtjn
- One pair of two-part steel ramps, approx. 4,650 mm long and approx. 900 mm wide
- Hydraulically folding ramp tips
- Ramps individually hydraulically adjustable approx. 235 mm outwards and approx. 215 mm inwards
- "Super Grip" rubber flooring 25 mm and approx. 5 mm steel flooring as additional reinforcement on the tapered section of the platform
- Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp
Axles, Suspension and Tyres:
- PA-X axle system, all axles forced steered hydro-mechanically
- Steering behavior of the first two axles can be optimally adjusted to the platform length both mechanically and hydraulically
- Hose rupture valve on the axle compensation cylinder with automatic RESET function
- Hydraulic cylinders with shut-off valves and pilot pin for securing in raised position
- 245/70 R 17.5 3PMSF
Accessories Included:
- Removable steel front wall, approx. 400 mm high
- Supply line connection strip to tractor unit, mounted at the height of the outer frame profile
- 1 spare wheel
- Outer beams of the gooseneck with mounting holes for screwable lashing rings
- The first hole approx. 200 mm from the front, then spaced approx. every 400 mm
- 2 pairs of screw-in lashing rings included
- Checker plate covering over the gooseneck
- 1 pair of removable ALU sideboards approx. 400 mm high, anodized, mounted on the gooseneck
- Removable rear ALU wall on the gooseneck, approx. 400 mm high, anodized
- 3.5" king pin / 2" king pin fitted
- Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide
- 4 wheel chocks
- 4 axle load gauges
- Mechanical fixed support legs at the front
- 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm
- Mechanical fixed support legs at the front
- Continuous steel sheet flooring with painted-in sand layer on the platform for anti-slip protection
- 1 intermediate table, approx. 500 mm wide, for the extending section, with elongated holes for suspended and adjustable bridging elements
- Painted sand coating on the supporting surfaces of the intermediate table
- Mechanical locking for securing the intermediate table in the extended position
- 8 pairs of stake pockets in the outer frame
- Extendable (galvanized) widening units approx. 230 mm per side
- 1 pair of hydraulic rear supports
- Central lubrication system
- 1 reversing light each left and right at the rear of the vehicle
- 3 kW electro-hydraulic power unit
- Widening boards, loose, in reinforced steel U-frame
- Radio and cable remote control
- 4 warning panels, approx. 423 x 423 mm
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tele-Semi-nachlaufg.
Ara
Durum: yeni, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5 3PMSF, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck with front corners chamfered at 45° and rear bevel approximately 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Extendable Loading Platform:
- Extendable loading platform with rear bevel approximately 1,000 mm x 8°
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 3 pairs of outward-folding lashing rings (LC 10,000 daN)
- 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN)
- Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN)
- Approx. 48 mm thick hardwood flooring, over-axle areas with checker plate
Axles and Tyres:
- BPW axles and suspension, 2 rigid axles, 1 self-tracking axle
- Technical axle load: 12,000 kg
- Electromagnetic reversing lock, activated via reverse gear or manually
- Air suspension with raise/lower valve
- Axle tools
- 235/75 R 17.5 3PMSF
Brake System:
- WABCO braking system complying with EU regulations, with EBS-E (2S2M)
Landing Legs:
- JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load)
Accessories Included:
- One spare wheel with holder in front of the front wall
- 2" kingpin
- Galvanised steel front wall, approx. 400 mm high
- Yellow-red air couplings on the galvanised front connection strip
- 4 wheel chocks with holders on the front wall
- Bracket for beacon at rear of trailer
- Recess at rear of gooseneck for ALU entry ramps
- Galvanised folding supports under the loading platform's rear bevel
- Cover plates to bridge gap between ramps and loading platform
- White reflective tape according to EU regulations on sides, extendable section, and rear in red
- Electro-hydraulic unit at the rear, under the loading platform
- Brackets for warning signs on both left/right of gooseneck and ramps, with socket
Gbodpsuqlmnofx Aqtjn
- Ramp control valves fitted on right-hand side of trailer
- Mudflap at the trailer rear
- Manual and documentation on USB stick
- ALU side boards and rear wall on gooseneck approx. 2,440 x 400 mm
- Rear galvanised plug-in stanchions, removable (superstructure length approx. 2,560 mm)
- Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light
- 3 pairs of WADER container locks in the loading platform for 20ft, 30ft or 40ft container
- 6 pairs of stake pockets 100x50 mm in outer frame of loading platform
- Galvanised extendable width extensions, approx. 230 mm per side
- 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading platform bevel
- Sanded, painted anti-slip layer on checker plates over kingpin and loading platform
- Holder for beacon on warning signs
- European reflector boards (red-yellow) at the rear
- 80 km/h speed limit stickers on rear and both sides
- Load manometer for determining axle loads including load chart
- HRM Metallisation (High Resistance Metallisation) of outer frame
- Complete steel structure shot-blasted, then defined visible surfaces metallised with ZINACOR 850 (Zinc 85% - Aluminium 15%) hot-finished
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Semi-nachlaufgelenkt
Ara
Durum: yeni, boş ağırlık: 7.900 kg, azami yük ağırlığı: 41.600 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, işletme ağırlığı: 7.900 kg, Donanım: ABS, Gooseneck:
- Gooseneck with rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Loading Area:
- Loading area with rear bevel approx. 1,000 mm x 8°
- Recess in the bevel and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm
- Cut-outs in the outer frame of the loading area for attaching tensioning straps
- Approx. 48 mm thick hardwood flooring, checker plate covering above the axles
Landing Gear:
- JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity 24 t (test load 50 t)
Axles and Tyres:
- BPW axles and suspension, 2 fixed axles, 1 self-steering axle
- Technical axle load: 12,000 kg
- Electromagnetic reversing lock, activated via reverse gear and manually
- Air suspension with lift and lower valve
- TPMS tyre pressure monitoring system as per ECE R 141
- Tyres: 235/75 R 17.5
Paintwork:
- Complete steel structure automatically blasted with shot blasting machine after welding
- Second blasting with corundum for optimal coating adhesion
- Final painting with 2 coats of 2K topcoat, single colour RAL MB 7350 Novagrau
- Rims painted silver
- Rear section metallised and painted RAL 9010 (Pure White)
- Cavities sealed with special wax
Electrical System:
- Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
- ASPÖCK-UNIBOX on the front connection bar with sockets: 2 x 7-pin & 1 x 15-pin
Accessories Included:
- Numerous lashing positions
- 2" king pin
- One galvanised steel front wall, approx. 400 mm high
- Yellow-red air couplings on the galvanised front connection bar
Gbodpjunrapefx Aqten
- 4 wheel chocks with holder on the front wall
- Holder at the rear of the gooseneck for ALU loading ramps
- Galvanised folding support legs under the rear bevel of the loading area
- Holder for rotating beacon at the rear of the trailer
- Galvanised, extendable widenings approx. 230 mm per side
- White reflective tape to EU regulations on the sides, red at the rear
- Holders for warning panels with socket at the gooseneck and rear crossmember, left and right
- Removable ALU sideboards and rear board on the gooseneck, approx. 2,440 x 400 mm
- Removable rear galvanised stakes
- 2 pairs of WADER container pockets in the loading area for a 20ft container
- 6 pairs of post pockets (for 100 x 50 mm stakes) in the outer frame of the loading area
- Movable mounting bar for ALU loading ramps at the rear of the vehicle
- 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area bevel
- Anti-slip sand coating applied to checker plates on gooseneck and loading area
- Four extendable warning signs, approx. 400 mm extension, size 423 x 423 mm, each with a position light
- Bracket for rotating beacon on the warning signs
- 80 km/h speed stickers at rear and on both sides
- European reflector panels (red/yellow) at rear of trailer
- Manual and operating instructions on USB stick
- HRM metallisation (High Resistance Metallisation) of the outer frame
- Complete steel structure shot-blasted, then all defined visible surfaces hot-finish metallised with ZINACOR 850 (zinc 85% - alu 15%)
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
Faymonville2-Achs-Tiefbett-Pendelach.-Bolzen-Lasch.
Ara
Durum: yeni, boş ağırlık: 12.800 kg, azami yük ağırlığı: 36.200 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 375 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 12.800 kg, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimized load bed length, approx. 3,750 mm long
- Gooseneck hydraulically lift/lowerable and detachable
- Technical fifth wheel load: 25,000 kg
- Suitable for tractor units: 4x2, 6x2, and 6x4
Gbodjvy Edcopfx Aqtjn
Load bed:
- Low bed with external beams, designed as a telescopic boiler bridge in low-profile construction with front extension
- Length 6,850 mm x width 2,540 mm
- One locking point approximately every 1,000 mm on the extension
Rear running gear:
- Rear running gear with closed outer frame with chequer plate cover and continuous prism-shaped excavator recess approx. 1,250/700 x 505 mm, open at the rear
Axles, Suspension, and Tires:
- "PENDULUM AXLE", all axles hydro-mechanically steered
- Hose rupture valve on axle compensation cylinder with automatic reset function
- Hydraulic cylinders with shut-off valves and securing pin for safe retention in raised position
- Final coat of axles in 2-layer acrylic paint (2K), single color "FAY-Grey-34-0260"
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tires: 245/70 R 17.5
- TPMS tire pressure monitoring system according to ECE R 14
- TPMS pressure sensors mounted in all wheels, including spares
Included accessories:
- Plug-in steel front wall, approx. 400 mm high
- 3 kW electro-hydraulic unit for controlling hydraulic functions, except for hydraulic winches
- One spare wheel with mounting adapter
- Gooseneck outer beams with mounting holes for bolt-on lashing rings
- Removable ALU side panels, approx. 400 mm high, anodized, on the gooseneck
- One removable ALU rear panel, approx. 400 mm high, anodized, on the gooseneck
- Chequer plate cover over the gooseneck
- Gooseneck guide plate for the fifth wheel, approx. 500 mm wide
- Gooseneck operation lighting with on/off switch
- Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly
- 2" king pin
- Anti-slip sticker on the left chamfer of the gooseneck
- Gooseneck closed at the rear upper area with a removable cover
- 4 chocks with holders
- Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings
- 1 pair of steel ramps with climbing strips and retaining bolts for bridging the reception hooks of the low bed
- The ramps can be placed above or between the hooks
- Mounting facility for steel drive-on ramps at the rear between the outer beams of the gooseneck
- Prepared for bolt-on container supports for 1x20ft on the outer beams
- Mechanical pin and strap connection from low bed to running gear for load bed exchange or installation of extension beams
- With electro-pneumatic-hydraulic couplings
- Outer beams of the low bed with integrated sand coating as anti-slip protection
- Removable loading floor (galvanized), can be inserted in 3 elements between the outer beams, with hardwood covering
- Folding extensions, approx. 230 mm per side
- Hook-in rail at the front of the rear running gear to the low bed for loose approach ramps
- 2 pairs of stake pockets recessed in the external frame of the running gear, for plug-in stakes approx. 100 x 50 mm
- Hook-in rail for loose ALU approach ramps on the rear cross member of the vehicle
- Central lubrication system with 2 pumps
- Remote control (radio and cable)
- 4 extensible warning signs approx. 423 mm x 423 mm
- Extensive lashing positions
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
FaymonvilleMAX Trailer 3-Achs-Mega-Tele-Plateau-zwangsgel.
Ara
Durum: yeni, boş ağırlık: 10.600 kg, azami yük ağırlığı: 35.400 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 940 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Loading platform:
- Loading platform with extendable design
- Loading platform with hardwood planks, approx. 500 mm x 8° rear chamfer
Gbjdpfjl Ux Rwex Aqtjn
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 3 pairs of outward-folding lashing rings (LC 10,000 daN)
- Cut-outs in the outer frame of the loading platform for attaching tension straps
Brake system:
- Brake system compliant with EU regulations with EBS-E (2S2M)
Paintwork:
- First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer
- High-quality 2-component (2K) topcoat, single-color in Novagrau (Nova grey)
- Rear section metallized and painted in RAL 9010 (Pure White)
- Metallic paint not available
Landing legs:
- JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load)
Steel construction:
- Steel construction made of high-strength fine-grained steels
- Steel grades:
- S355J2+N/S355MC (yield strength 355MPa)
- S690QL/S700MC (yield strength 690MPa)
Electrical system:
- Electrical system according to EU regulations, LED lighting 24 Volt
- Sockets: 2x 7-pin & 1x 15-pin
Axles and tires:
- BPW axles, air-suspended, with disc brakes (377 mm), with lift/lower function
- Hydro-mechanically forced steering
- Axle tool kit
- Twin tires 235/75 R 17.5
Included accessories:
- Yellow-red air couplings on the galvanized front connection rail
- 4 chocks with holders
- 2" king pin
- Galvanized steel front wall approx. 1600 mm high
- White reflective tape as per EU regulations on sides, extension, and rear in red
- Loading platform with heavy-duty hardwood floor
- Steering from front and rear via cable
- Remote control via push buttons with single-track axle monitoring
- Radio remote control for auxiliary steering
- 9 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform
- Galvanized folding supports under the loading platform chamfer
- Sliding hook-in rail for ALU ramps at the rear of the vehicle
- European reflective signs (red-yellow) at the rear of the trailer
- One mudflap at the rear of the trailer
- One bracket for a rotating beacon at the rear of the trailer
- On the gooseneck and on the left/right rear panel each: one holder for warning signs including socket
- INOX toolbox 1,500 x 390 x 810 under the loading platform on the right (direction of travel)
- BEKAMAX (Pico) central lubrication system with standard grease NLHI-2 and removable guard for the pump
- 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft container, or 1x 40ft container, with additional locking point in the extension for a 45ft container
- 4 pairs of cross-mounted stake pocket rails in the loading platform, for plug-in stanchions 100 x 50 mm
- Lift axle at the front axle with TEBS-controlled adjustment, depending on current axle load and loading status
- Speed stickers 80 km/h at rear and both sides
- Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light
- Holder for rotating beacon on warning signs
- Load pressure gauge for axle load determination, including load diagram
- HRM metallization (High Resistance Metallisation) of the outer frame
- Complete steel construction shot-blasted, then defined visible areas hot-finished metallized with ZINACOR 850 (Zinc 85% - Alu 15%)
Küçük ilan
Wendelstein
2.230 km
Inşaat makineleri için aks
CarraroAxle 26.16 Achse
Ara
Durum: ikinci el, Aks:
+ Carraro
+ Tip 26.16
Tüm yeni eklenen araçları e-posta ile alın – Bültenimize abone olun!
Godpfxjyx Hgno Aqtebn
Hatalar ve yazım yanlışları mümkündür, ara satış hakkı saklıdır!
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Hooglede
2.834 km
Yarı alçak yükleyici
KaiserLowbed
Ara
Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/1994, süspansiyon: çelik, lastik boyutu: 9.5r17.5, renk: diğer, Üretim yılı: 1994, Aks konfigürasyonu
Lastik ölçüsü: 9.5r17.5
Frenler: kampanalı frenler
Süspansiyon: yaprak süspansiyon
Arka aks 1: Çift lastik; sol iç lastik diş derinliği: 3 mm; sol dış lastik diş derinliği: 8 mm; sağ iç lastik diş derinliği: 3 mm; sağ dış lastik diş derinliği: 5 mm
Arka aks 2: Çift lastik; sol iç lastik diş derinliği: 6 mm; sol dış lastik diş derinliği: 6 mm; sağ iç lastik diş derinliği: 6 mm; sağ dış lastik diş derinliği: 6 mm
Arka aks 3: Çift lastik; yönlendirilebilir; sol iç lastik diş derinliği: 3 mm; sol dış lastik diş derinliği: 3 mm; sağ iç lastik diş derinliği: 2 mm; sağ dış lastik diş derinliği: 2 mm
Ağırlıklar
Boş ağırlık: 10.350 kg
Yük kapasitesi: 39.650 kg
Azami toplam ağırlık: 50.000 kg
Durum
Hasar: yok
Gjdpfoy Il Nysx Aqtjbn
Küçük ilan
Hooglede
2.834 km
Yarı alçak yükleyici
Vanhool
Ara
Durum: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 01/1992, süspansiyon: hava, lastik boyutu: 265/70 R19.5, renk: diğer, Üretim yılı: 1992, Lastik ölçüsü: 265/70 R19.5
Frenler: Tambur frenler
Süspansiyon: Havalı süspansiyon
Arka aks 1: Çift lastikli; Sol iç lastik diş derinliği: 10 mm; Sağ iç lastik diş derinliği: 86 mm; Sağ dış lastik diş derinliği: 10 mm
Arka aks 2: Çift lastikli; Aks markası: SAF; Sol iç lastik diş derinliği: %10; Sol dış lastik diş derinliği: %10; Sağ iç lastik diş derinliği: %10; Sağ dış lastik diş derinliği: %10
Boş ağırlık: 13.670 kg
Yük taşıma kapasitesi: 18.330 kg
Gjdpfxoy Ilimo Aqtsbn
toplam ağırlık: 32.000 kg
Hasar: yok
Küçük ilan
Hooglede
2.834 km
Yarı alçak yükleyici
MOL
Ara
Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2014, süspansiyon: hava, lastik boyutu: 245/70 R17.5, renk: diğer, Üretim yılı: 2014, Aks düzeni
Aks markası: SAF
Frenler: Kampanalı frenler
Süspansiyon: Havalı süspansiyon
Arka aks 1: Lastik ebadı: 245/70 R17.5; Çift tekerlekli; Sol iç diş derinliği: 3 mm; Sol dış diş derinliği: 3 mm; Sağ iç diş derinliği: 3 mm; Sağ dış diş derinliği: 3 mm
Arka aks 2: Lastik ebadı: 235/75 R17.5; Çift tekerlekli; Sol iç diş derinliği: 5 mm; Sol dış diş derinliği: 5 mm; Sağ iç diş derinliği: 5 mm; Sağ dış diş derinliği: 5 mm
Arka aks 3: Lastik ebadı: 235/75 R17.5; Çift tekerlekli; Yönlendirilebilir; Sol iç diş derinliği: 8 mm; Sol dış diş derinliği: 8 mm; Sağ iç diş derinliği: 8 mm; Sağ dış diş derinliği: 8 mm
Ağırlıklar
Boş ağırlık: 8.690 kg
Yük kapasitesi: 39.310 kg
Azami yüklü ağırlık: 48.000 kg
Godpfx Aqoy Ilbijtebn
Durum
Hasar: yok
Küçük ilan
Renswoude
2.710 km
Yarı alçak yükleyici
VTRMACHINE LOADER | BRIDGE | DOUBLE RAMPS | ALL ST...
Ara
Durum: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 01/2026, toplam uzunluk: 136.600 mm, toplam genişlik: 2.540 mm, toplam yükseklik: 900 mm, süspansiyon: hava, renk: gri, Üretim yılı: 2026, Donanım: ABS, = Additional Options and Accessories =
- Air suspension
= Remarks =
VTR - Vlastuin Trailer
Low loader
18-ton drawbar
30-ton wide axle
Payload capacity: 34,000 kg
Color: Grey RAL 7021
Completely open loading platform
Double rear ramps (4,500 mm)
Movable lifting device for easy access to the drawbar
Extendable: 2,500 mm
Raised: 25 mm
Axle 1: Fixed, height adjustable
Axles 2 and 3: Hydraulically steered
Functions: Remote control, rear ramps, lifting device, and steering
245/70 R17.5 Goodyear
Alcoa DB
SAF axle
Wabco Smartboard+
Axle load measurement
Tyre Pressure Monitoring System (TPMS)
Full LED lighting
Marker/width indicators
Powerful spotlight on the mount/switchable off
Work lights
Galvanized grating floor
42 lashing eyes positioned throughout the trailer for good visibility
Load securing
Extensions 250 mm – galvanized
4 stainless steel storage boxes 100 × 50 × 30 cm
Storage box at the neck, easy-to-mount winch (optional)
Intermediate table, 50 cm, removable with supports for easy storage
Neck: 3,950 mm long, lashing eyes and aluminium plates for load securing
Lower loading platform: 9,200 mm loading length, height 90 cm
Supports: 25,000 kg Jost module
Rear supports for loading heavy machinery
= Further Information =
Axle Configuration
Axle brand: Goodyear
Brakes: Drum brakes
Suspension: Air suspension
Rear axle 1: Twin tyres; light alloy rims; lift axle; Max. axle load: 10,000 kg
Rear axle 2: Twin tyres; light alloy rims; max. axle load: 10,000 kg; steered
Rear axle 3: Twin tyres; light alloy rims; max. axle load: 10,000 kg; steered
Weights
Unladen weight: 14,000 kg
Payload: 34,000 kg
GVW: 48,000 kg
Functional
Platform height: 90 cm
Gbedpfoyctz Esx Aqtjn
Extendable body: Yes
Maintenance, History, and Condition
APK (vehicle inspection): valid until 01.2027
Technical condition: very good
Visual condition: very good
Further Information
Please contact David F Middelman for more information.
Sizin için aramayı kolaylaştırıyoruz: "martz alçak yükleyici inşaat makineleri"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.











































































































































































































































































