Kullanılmış Es-Ge 3-Achs-Ballastauflieger satın al (45.393)

Koşul: yeni, azami yük ağırlığı: 39.070 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. Excerpt from the equipment list. Full specification available upon request. Chassis: * Welded structure made of high-quality steel profiles with through cross-members. Designed for high point loads * Outer frame as UNP profile * Wear plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also suitable for 3.5-inch mounting) Crsdsyz E T Sjpfx Aldjb Underrun protection: * According to EU regulations, bolted version Side impact protection: * According to EU regulations Landing gear: * 24 t landing legs with single-sided operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted 10-hole wheel bolts with ET 120, total air suspension lift approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), control via rotary slide valve with stop function, with RTR function * Switch for second ride height (+ approx. 50 mm) mounted on the lift/lowering unit bracket * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic, load-dependent lift control, start assist via push button in driver's cab (15-pin socket PIN12). The cab push button is not included in delivery Brake system: * Two-line compressed air brake system according to EU standard with EBS and RSS, automatic load-dependent adjustment, spring-loaded cylinders as parking brake, anti-swap coupling heads firmly mounted on front cross-member, no connecting line to the tractor unit, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on rim 11.75 x 22.5 (brand of our choice), ET 120 * Basic tyre pressure monitoring system, connected to the EBS CAN-bus system * Tyre pressure display in the driver’s cab (pre-installed by chassis manufacturer) Mudguards: * According to EU regulations, PVC mudguards (half-shells) over all axles * Mud flaps with anti-spray design Load securing: * 8 pairs of hook plates welded into the outer frame (pulling force approx. 3 t) * 6 pairs of lashing rings in the outer frame, evenly distributed (pulling force approx. 10 t) Stanchion pockets / stanchions: * 5 pairs of stanchion pockets recessed into the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stanchion pockets recessed into the floor, approx. 90 x 90 x 4 mm * 10 removable stanchions made of galvanized square tube, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Front wall bolted, approx. 1,200 mm high, sheet metal clad Stanchion magazine: * Magazine for removable stanchions inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized Omega steel profiles Lighting system: * According to EU regulations, 24 Volt with multi-chamber lights, LED side marker lights, white LED position lights front, LED outline marker lights rear, license plate lights * 1 x 15-pin and 2 x 7-pin socket at the front cross-member Equipment: * Warning plate according to ECE 70 * 2 x LED work lights at the lamp carrier (activated by reverse gear) * Bracket for rotating beacon at the rear (including rotating beacon) * 1 folding and extendable rear access ladder (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via switch on the c

Koşul: yeni, azami yük ağırlığı: 39.850 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment specification. Full specification available on request. Chassis: * Welded construction made from high-grade steel profiles with punched profile cross members * Designed for high point loads. Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underrun nose approx. 700 mm wide * Mounting bracket at front for customer-side installation of a support device, approx. 90 x 90 x 4 mm Coupling gear: Codpfxewx Dbpj Aldorb * 2-inch kingpin (also suitable for 3.5) Underride guard: * According to EC standards, bolted version Side underrun protection: * According to EC standards Landing legs: * 24 t landing legs, single-sided operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle assemblies, brand of our choice, disc brakes approx. 430 x 45 mm * ABS * Centrally aligned wheel connection, 10 holes with ET 120 * Total air suspension lift approx. 200 mm, comprising lift approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with detent function, with RTR function * Switch for second driving height (+ approx. 50 mm) on the lift/lower device bracket * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic, load-dependent lift control, start-up aid via push button in the cab (15-pin socket PIN12). Push button in the cab not included in scope of delivery Brake system: Brand of our choice * Dual-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent control * Spring actuators as parking brake * Non-interchangeable coupling heads fixed to the front cross member, without connecting line to the truck Tyres: * 6x, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand of our choice), ET 120 * Basic version of tyre pressure monitoring, connected to EBS CAN bus system * Tyre pressure display in cab (pre-installation by truck manufacturer) Mudguards: * According to EC standards, PVC mudguards (half-shells) over all axles * Mud flaps with anti-spray Load securing: * 8 pairs of hook plates welded into outer frame (lashing capacity approx. 3 t) * 6 pairs of lashing rings on the side in the outer frame, evenly distributed (lashing capacity approx. 10 t) * 13 pairs of lashing eyes (U-rings) in the outer frame (tested lashing capacity approx. 2.5 t per lashing point) Stanchion pockets/stanchions: * 5 pairs of stanchion pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stanchion pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stanchions made of galvanized square tube, approx. 80 x 80 x 4 mm, with stop at the bottom Front wall: * Bolted front wall, approx. 1,200 mm high, clad with approx. 5.5 m sheet metal Stanchion magazine: * Inside at the front wall, magazine for plug-in stanchions Floor: * Approx. 28 mm hardwood floor recessed in outer frame, with galvanized omega-steel profiles Lighting system: * According to EC standards, 24 Volt with multi-chamber lamps * LED side marker lights * LED front position lights (white) * LED rear outline marker lights * Number plate illumination * 1x 15-pin and 2x 7-pin connectors on front cross member Equipment: * Wheel chock with double holders * Warning sign according to ECE 70 * 2 LED work lights on lamp bracket (switched via reverse gear) * Bracket for rotating beacon at rear (incl. rotating

Koşul: yeni, azami yük ağırlığı: 32.155 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Selection of features. Full specification on request. Chassis: Cjdpfxjy Auhzs Aldorb * Welded structure made of high-quality steel profiles with punched profile cross members. Designed for high point loads. Coupling system: * Fifth wheel plate with 2-inch kingpin. Underrun protection: * In accordance with EC regulations, bolted design. Side underrun protection: * In accordance with EC regulations. Landing legs: * 2 x 12 t landing legs with compensating foot and single side operation (right side in direction of travel). Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, centered wheel hub ET120, ABS, total air suspension travel approx. 180 mm (lifting approx. 110 mm, lowering approx. 70 mm) * Air suspension controlled via manual control valve with stop function. Steering: * Last axle forced-steered via rod linkage. Axle lift: * First axle liftable, with fully automatic load-dependent lift control. Brake system: * Two-line pneumatic brake system according to EC with EBS and RSS, automatic load-sensing control, spring-loaded cylinders for parking brake, anti-interchange couplings mounted fixed to front cross member, no connecting line to tractor unit. * Manufacturer: Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 ET 120 rims – brand of our choice. Incl. tyre pressure monitoring, tyre pressure display in cab (prepared by vehicle manufacturer). Mudguards: * In accordance with EC regulations, 1/4 PVC mudguards front and rear of axle units. Load securing: * 9 pairs of foldable lashing rings, evenly distributed (traction force approx. 8.0 t) * 8 pairs of foldable lashing rings, evenly distributed (traction force approx. 2.5 t) * External frame features a lashing point approx. every 500 mm for tension belts (lashing can be applied with side walls closed; outer frame with chamfered design). Stake pockets: * 10 pairs of stake pockets evenly distributed in outer frame * 4 rows of transverse stake pockets across the loading area * Plug-in stanchions: 20 pcs, galvanized pipe approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stanchions mounted inside front bulkhead. Front bulkhead: * Reinforced fixed steel construction, interior paneled with approx. 9 mm phenolic plywood (height approx. 1,250 mm) Floor: * Approx. 28 mm Z-hardwood floor recessed into the outer frame. Sideboards: * 4 x 25 side panels and rear wall made from anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stanchions. * Sideboard and stanchion magazine: under chassis * Insertion rails on left and right for sideboards and stanchions Lighting system: * In accordance with EC regulations, 24 Volt with multi-chamber lights, LED side marker lamps, LED front position lamps (white), LED rear outline lamps, license plate lamps * 1 x 15-pole and 2 x 7-pole socket connections on front cross member. Equipment: * Two wheel chocks with holders * Warning boards according to ECE 70 * Work light mounted on light bar (switches on via reverse gear) * Holder for beacon at rear incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Painting: * Chassis and front bulkhead cleaned by sandblasting, primed and finished in a single color * Chassis: hot-dip galvanized + RAL color of choice * Front bulkhead: RAL color of choice * Sideboards: anodized aluminum * Front bulkhead stanchions: hot-dip galv

Koşul: yeni, azami yük ağırlığı: 63.960 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our entire vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available upon request. Chassis: * Welded construction made from high-grade steel profiles with punched-through cross members, designed for high point loads * Outer frame made of UNP steel Coupling device: * 2-inch king pin Underride protection: * According to EC standards, bolted version Side underrun protection: * According to EC standards Landing gear: * Landing legs with single-sided operation, support load approx. 66 t / lifting capacity approx. 24 t Axles: * 5 x 10 t air suspension axle units, SAF brand, with drum brakes approx. 400 x 200 mm * ABS * Centered 10-hole wheel mounting, offset 0 * Total air suspension travel approx. 200 mm (lift approx. 140 mm, lower approx. 60 mm), controlled via rotary lever valve with detent function Steering: * 1st axle steered, 2nd axle fixed, 3rd, 4th, and 5th axles force-steered via tie rod system * Centralized external grease points Axle lift: * First and second axles automatically liftable, with additional cutoff on the chassis Brake system: * Two-line compressed air brake system according to EC standards with EBS and RSS, automatic load-dependent adjustment, Wabco brand 4S/3M * Spring-loaded brake cylinders as parking brake, anti-swapping coupling heads mounted directly on front cross member, no connection line to truck * Aluminum air reservoir Tyres: * 10-fold 445/65 R22.5 164J on 11.75 X 22.5 offset 0 rims – brand of our choice TPMS: * Tire pressure monitoring system (TPMS) according to ECE R141, with data transmission to tractor unit Mudguards: * According to EC standards, 1st axle front, 2nd axle rear, 3rd, 4th, and 5th axles each with 1/4 PVC mudguard front and rear * Rear mudguards with spray flaps Load securing: * 5 pairs of folding lashing rings, evenly distributed (tensile force approx. 14 t) * 11 pairs of welded lashing plates in the outer frame (tensile force approx. 3 t) * 10 pairs of side lashing rings in the outer frame, evenly distributed (tensile force approx. 8 t) Cjdjwx Dcaopfx Aldorb Stake pockets: * 10 pairs of stake pockets inset in the outer frame * 6 pairs of stake pockets inset in the floor (on outer longitudinal beam) Removable stakes: * 16 galvanized plug-in stakes, approx. 80 x 80 x 8 mm, usable length approx. 850 mm Stake magazine: * On each side in front of the front wall, a magazine for 8 plug-in stakes approx. 80/80 mm Front wall: * Bolted corner uprights filled with aluminum hollow profiles, inside with full-width and height steel impact plate Floor: * Approx. 28 mm Z-hardwood flooring inset into the outer frame, flush Lighting system: * According to EC standards, 24 Volt with multi-chamber lamps * LED side marker lamps * Front white LED position lamps * Rear LED outline marker lamps * License plate lamp, 1x15 and 2x7-pin plug connectors at front cross member Equipment: * Two wheel chocks with holders * Warning panel according to ECE 70 * Work light on lamp carrier (activated by reverse gear) * Bracket for rotating beacon at rear (including beacon) * 1 fixed access ladder on each side, including plug-in step assistance * Smart Board * Vehicle swing-out warning sticker & load center of gravity label Paintwork: * Chassis and front wall sandblasted and finished with high-quality coating * Chassis: hot-dip galvanized + RAL color of your choice * Front wall: RAL color of your choice * Front wall corner posts: ho

Koşul: yeni, azami yük ağırlığı: 56.570 kg, toplam ağırlık: 66.500 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.550 mm, Donanım: ABS, Our complete vehicle stock with immediately and short-term available vehicles can be found on our website. Excerpt from the equipment specification. Complete equipment details available on request. Chassis: * Chassis frame construction made of welded longitudinal beams and inserted cross members * Underrun nose width approx. 700 mm * Fifth wheel plate at least approx. 8 mm thick, positioned between the main beams * Maximum cross member spacing 400 mm (for longitudinally laid floor) * 3.5 inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing legs: * 24 t telescopic landing gear JOST - MODUL CH (Heavy Duty) S-foot Axles: * 4 x 10 t SAF axles with large drum brake * 22.5 single tires * Axle spacings approx. 1,700/1,810/1,810 mm * Air suspension units, each with 10 t load capacity, lifting and lowering device with 1 rotary valve Knorr/Wabco * Mounting bracket for lifting and lowering device, bolted version Brakes: * Smartboard/TIM/Infocenter on the holder for lifting and lowering, in addition to the lifting and lowering valve, without battery (can only be operated with the towing vehicle) * Holder for lights and brakes at the front of the underrun nose, total height approx. 700 mm * Tire pressure monitoring basic version, connected to the EBS CAN bus system * With dual release valve for brake and spring accumulator * Test nipple for brake cylinder pressure on the front right brake cylinder * 1 coupling head each red and yellow * Lifting and lowering device installed at the rear left in driving direction * EBS brake system by Wabco, EBS diagnostics via CAN bus (EBS connector), no external diagnostic cable provided!! Tyres: * 8 x 445/65 R 22.5 – branded manufacturer of our choice * Hub centering Lubrication: * Grease nipple strips on the bogies and at the front on the steering. No central lubrication Body: * Without body certificate according to DIN EN 12642 XL * 2x LED work lamps on top of the front wall (rear-facing), switch on lifting/lowering control bracket * Robust front wall for platform body * Contour markings side yellow, rear yellow * Front wall approx. 800 mm high, with sheet metal cladding, bolted design Lighting system: * 2x LED work lamps, installed in the lamp plate, switched via reverse gear * 2x LED work lamps, switched via reverse gear, 1x per side near landing gear Crjdpfswx Dctsx Aldsb * 2x LED reversing lights per side, 1 mounted before the 1st axle * Lighting/wiring system by manufacturer of our choice * Number plate lighting * The towing vehicle must provide adequate power for the chosen lighting (esp. reversing lights) * Position lights front, bottom, white, 1 each right and left (LED) * 24 volt lighting system with large multifunction lamp * Side marker lights (LED) flashing * 1x 15-pin and 2x 7-pin connectors at the front via multifunction box * EBS socket * 1 pair of lane departure warning lights (LED) Floor: * Hardwood floor approx. 28 mm, alternately with galvanized omega steel profiles Paint/Coating (no metallic colors): * Chassis painted in RAL color of choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing legs black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted in RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 hook plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD SLP lashing points per side w

Koşul: yeni, toplam ağırlık: 43.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, Our complete vehicle inventory, featuring vehicles available for immediate and short-term delivery, can be found on our website. Excerpt from the equipment specification. Complete equipment details available on request. Chassis: * Welded construction made of high-quality steel profiles with through-type cross-members, designed for high point load * Underride nose, approx. 700 mm wide * Outer frame as UNP profile * Wear plate approx. 8 mm * Fifth wheel height at front approx. 130 mm Towing Equipment * 2" kingpin Underrun Protection * Bolted version, compliant with EC standards Side Protection * EC compliant, made of anodized aluminum profiles Landing Legs * 2 x 12 t landing legs with compensation foot and single-side operation on the right in direction of travel Axles * 3 x 9 t air suspension axle units, disc brakes 22.5" * Total lift approx. 180 mm * Lifting and lowering system via rotary slide valve Brake System * Dual-line compressed air brake system according to EC, with EBS and RSS, automatic load-dependent control * Spring-actuated cylinders as parking brake * Reversal-proof coupling heads permanently mounted on front beam, without connecting line to tractor unit Tyres * 6-off, 385/55 R22.5 160J on 11.75x22.5 ET 120 steel rims, manufacturer of our choice * Tyre pressure monitoring (TPMS) via EBS CAN-bus system Fenders * EC compliant Spare Wheel Carrier Not included Load Securing * 9 pairs of foldable lashing rings, evenly distributed, tensile strength approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, tensile strength approx. 2.0 t * Outer frame with boreholes approx. every 400–600 mm for inserting tension belts Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed in outer frame with galvanized omega steel profiles Lighting System * EC compliant, 24 V, with multi-chamber lights * LED side marker lights * LED position lights, white, front * LED outline lights, rear * License plate lights * Lane marker LED lights * 1x15- and 2x7-pin socket connectors on front beam Equipment * 2 wheel chocks with holder * ECE 70 warning panels * Bracket for rotating beacon, incl. beacon * 2 rubber dock buffers at the rear * Rear right foldable and extendable access ladder (no platform) * 1 open box made of perforated sheet metal, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind axles Paintwork * Front wall: RAL single colour of choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + RAL single colour of choice * Central stanchions: RAL single colour of choice Codpfjw U H Sbox Alderb * Side guard system: aluminium anodized * Underrun protection: white (RAL 9016 traffic white) * Add-on parts: galvanized/KTL black * Rims: silver Conspicuity Marking * Fully yellow Including Special Accessories * First axle liftable, with fully automatic, load-dependent lifting control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets transverse to the loading area * 20 pieces of stanchions made of galvanized tube 80/50, total length approx. 1,200 mm * Magazine for 20 insertable stanchions on inside of front wall * 5 x 25 side panels and rear panel made of anodized aluminum hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side panel and stanchion magazine: under-chassis left and right i

Koşul: yeni, azami yük ağırlığı: 34.350 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specification on request. Chassis: * Welded construction from high-quality steel profiles with punched cross members, suitable for high ground or point loads, featuring a heavy-duty outer frame * Rear loading floor as a steel welded construction, equipped with two welded-in outer driving rails made from 5-hole steel plate (hole pattern system Lohr/Rolfo), hydraulically lowerable over a length of approx. 2,250 mm by approx. 350 mm * Rear of vehicle incorporates a hydraulically extendable loading table (approx. 1,500 mm) as a steel welded structure with 5-hole steel plate (hole pattern system Lohr/Rolfo) cover, lamp mount, and 2 ramp compartments with ramp supports * Rear section operated and controlled via an electric-hydraulic power unit, mounted in a stainless steel box on the left side of the chassis, controlled by radio remote control * Power supply via the towing vehicle’s battery (NATO socket on the front wall, no connecting cable to the tractor) Kingpin: * 2-inch kingpin, replaceable from below Underrun Protection: * According to EU standards, fixed mounted Landing Legs: * 2 x 12 t landing gears with 2-speed gearbox Axles: * 3 x 9 t air suspension axle units * Make: SAF with disc brakes approx. 370 x 45 mm * ABS Csdpfx Alowt Iyljderb * 10-hole wheel connection, centered, ET120 * Total air suspension stroke approx. 310 mm (raising approx. 220 mm, lowering approx. 90 mm) * Air suspension control via hand lever with stop function Lift Axle: * 1st and 3rd axles liftable automatically, additionally switchable via controls on the chassis frame or via PIN 12 of the lighting socket Tyres: * 6x, 445/45R19.5, on 14.00x19.5 rims, 10-hole ET120 fitted Mudguards: * According to EU standards, 1/4 PVC mudguards * 1st axle front and rear, 2nd and 3rd axle rear Brake System: * Make: Wabco * Dual-line brake system according to EU standards, with EBS and automatic load sensing * Spring actuators serving as parking brakes on 2 axles * Interchange-proof coupling heads fixed to the front cross member, without connecting line to the tractor Lighting System: * According to EU standards, 24 Volt, * Multi-chamber rear lights * License plate lights * LED side marker lamps * LED position lamp (white) front and LED lane marker lights on the rear * 15-pin socket as well as 2x 7-pin sockets fixed on the front cross member, no connecting lines to the tractor Load Securing: * 9 pairs of folding lashing rings evenly distributed, lashing capacity approx. 8 t * 8 pairs of folding lashing rings evenly distributed, lashing capacity approx. 2.5 t * 2 pairs of folding lashing rings at vehicle rear, lashing capacity approx. 2.5 t * Drilled holes in outer frame every approx. 500 mm for tie-down straps Stake Pockets: * 16 detachable stakes approx. 100/40 mm, usable length approx. 800 mm Stake Pocket Recesses: * Each side recessed with 8 stake pockets in the outer frame * 4 rows of stake pockets transverse to the loading platform Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame Front Wall: * Enclosed front wall * Storage depot for 16 detachable stakes approx. 100/40 mm * Front wall bolted to head frame Equipment: * 2 wheel chocks with brackets * 2x PVC toolboxes, approx. 600/400/500 mm * Bracket for revolving beacon at rear incl. lamp * 2 LED reversing lights (at rear) * 2 aluminium loading ramps, approx. 1,550 x

Koşul: ikinci el, azami yük ağırlığı: 32.610 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2023, bir sonraki muayene (TÜV): 11/2025, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Complete specifications available upon request. Chassis: * Welded construction made of high-quality steel profiles with through-profile crossmembers, designed for high point loads Fifth wheel coupling: * 2-inch kingpin Underrun protection: Codjwyhy Eopfx Aldjrb * Bolted design, compliant with EU regulations Side underrun protection: * Compliant with EU regulations Landing gear: * 2 x 12 t landing legs with compensating foot and single-sided operation on the right in driving direction Axles: * 3 x 9 t air suspension axle assemblies * Disc brakes * Brand: Gigant Brake system: * Dual-line compressed air brake system according to EU regulations with EBS and RSS, automatic load-dependent control * Spring-type cylinders as parking brake * Mistake-proof coupling heads permanently mounted on the front crossmember, without connecting line to the towing vehicle * Brand: Wabco Tyres: * 6 units, 385/55 R22.5 160J on 11.75 x 22.5 steel rims, offset 120 Mudguards: * Compliant with EU regulations, PVC mudguards before and after the axle assemblies Spare wheel carrier: * 1 double basket with mounting material for one spare wheel with offset 120 Load securing: * 9 pairs of foldable lashing rings, evenly distributed, tensile strength approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tensile strength approx. 2.5 t * Holes for tension belts in the outer frame, approx. every 500 mm Front wall: * Reinforced steel construction, fixed * Interior covered with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor recessed in the outer frame Lighting system: * Compliant with EU regulations, 24 Volt, with multi-chamber lights * LED side marker lights * LED front position lights (white) * LED rear outline marker lights * Number plate lights * 1x 15-pin and 2x 7-pin socket connections on front crossmember Paintwork: * Chassis and front wall cleaned by sandblasting, primed and painted in single color * Chassis: RAL 3002 Carmine red * SSV: Aluminium anodized * Underrun protection: white RAL 9010 * Attachments: galvanized/black KTL * Rims: silver Incl. special equipment: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanized tube 80/50, total length approx. 1,000 mm * Magazine for 20 plug-in stanchions inside the front wall * Container locks for 1 x 40' and 2 x 20' containers, flush with rear * Container locking for 1 x 20' container in the center * Work lamp on lamp bracket (switched via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Koşul: yeni, toplam ağırlık: 43.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Cedjugqvfjpfx Alderb Excerpt from the equipment list. Full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with punched-through cross members, designed for high point loads * Underride protection nose, approx. 700 mm wide * Outer frame as UNP profile * Wear plate approx. 8 mm * Neck height at front approx. 130 mm Coupling Device: * 2" kingpin Rear Underride Guard: * Bolted version, compliant with EU regulations Side Underrun Protection: * EU-compliant, made of anodised aluminium profiles Landing Legs: * 2 x 12 t landing legs with compensating foot and single-side operation, positioned front right Axles: * 3 x 9 t air suspension axle assemblies * 22.5" disc brakes * Total lift approx. 180 mm * Lifting and lowering device via rotary slide valve Braking System: * Dual-circuit compressed air braking system according to EU regulations with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Reversal-proof coupling heads permanently mounted on the front crossmember, without connection line to the tractor unit Tyres: * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 * Manufacturer of our choice * Tyre pressure monitoring (TPMS) via EBS CAN bus system Mudguards: * EU-compliant Spare Wheel Holder: * Not included Load Securing: * 9 pairs of folding lashing rings, evenly spaced, traction approx. 5.0 t * 9 pairs of folding lashing rings, evenly spaced, traction approx. 2.0 t * In the outer frame, holes approx. every 400-600 mm for attaching tie-down straps Front Wall: * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanised omega steel profiles Lighting System: * EU-compliant, 24 volt, with multi-chamber lights * LED side marker lights * LED position lights front white * LED outline marker lights rear * Number plate lights * Lane assist LED lights * 1x 15-pin and 2x 7-pin connectors on front crossmember Equipment: * 2 chocks with holders * ECE 70 warning plates * Holder for rotating beacon incl. rotating beacon * 2 rubber bump stops at rear * Rear right access ladder, foldable and extendable (without platform) * 1 open box made of perforated sheet metal, lateral to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, positioned behind the axles Paintwork: * Front wall: single colour RAL as desired * Chassis: hot-dip galvanised * Outer frame: hot-dip galvanised + single colour RAL as desired * SSV: Aluminium anodised * Underride protection: white (RAL 9016 traffic white) * Attachments: galvanised/KTL black * Rims: silver * Contour marking: complete yellow Including Special Equipment: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion sockets in the outer frame, evenly distributed * 4 rows of stanchion sockets across the load area * 20 pieces of stanchions made from galvanised tube 80/50, total length approx. 1,200 mm * Magazine inside front wall for 20 plug-in stanchions * Container locks for 1 x 40' as well as 2 x 20' containers, flush at rear * Container lock for 1 x 20' container central position * Work spotlight on lamp bracket (activated by reverse gear) * 2 stainless steel toolboxes, approx. 600x500x50

Koşul: ikinci el, boş ağırlık: 14.100 kg, azami yük ağırlığı: 33.900 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 12/1999, süspansiyon: hava, lastik boyutu: 235/75 17,5, lastik durumu: 50 yüzde, renk: yeşil, Üretim yılı: 1999, ön lastik ölçüsü: 235/75 17,5, arka lastik boyutu: 235/75 17,5, şoför kabini: gündüz kabini, emisyon sınıfı: hiçbiri, Donanım: ABS, kamyon kaydı, Reference number for inquiries: 68575 Nooteboom, Euro norm * Year of manufacture: 1999 * ABS (Anti-lock Braking System) * Air suspension * Suspension type: Air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload: 33,900 kg Crodpfx Aoyibz Roldeb * Permissible total weight: 48,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 50% / 50% - Tire dimension: 235/75 R17.5 * Tire condition 2nd axle: 40% / 40% - Tire dimension: 235/75 R17.5 * Tire condition 3rd axle: 50% / 50% - Tire dimension: 235/75 R17.5 * Tire size: 235/75 R17.5 * Manufacturer: ES-GE * 3rd axle hydraulically forced-steered * Extendable up to 9,950 mm * Telescope extension defective * Loading area: 10,990 mm Disclaimer: Specifications subject to change without notice, prior sale, and errors excepted. More pictures and videos are available on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Processing of all (export) documentation * Arrangement of export / customs number plates * Vehicle preparation: new tarpaulins, signwriting, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transportation of commercial vehicles Please contact our trained staff—we are happy to advise you.

Koşul: ikinci el, azami yük ağırlığı: 69.060 kg, toplam ağırlık: 84.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 06/2013, bir sonraki muayene (TÜV): 07/2026, toplam genişlik: 2.540 mm, Donanım: ABS, Acil ve kısa vadede erişilebilir araçlarımızın tamamını internet sitemizde bulabilirsiniz. Donanımdan bir alıntı. Tam donanım talep üzerine sunulur. - Yüksek kaliteli QSTE ince taneli çelikten şasi, merkez kirişli, teleskopik değil - Halka başına yaklaşık 100 kN yük mukavemetli, katlanabilir sabitleme halkaları - Yük sehpası bölgesinde 4 çift payanda cebi, yaklaşık 80 x 80 mm - Hidrolik destek ayakları (elektro-hidrolik) Crsdpfsy Ikbhox Aldeb - 6 x 11.000 kg (teknik), SAF akslar - Havalı süspansiyon - 1. aks yönlendirmeli, 2. aks sabit - 3. - 6. akslar zorunlu yönlendirmeli - Tridec direksiyon - Ek yönlendirme - NATO soketi - 1. aks kaldırılabilir - Lastikler 265/70R19.5 - 3,5 inç değiştirilebilir king pin - Wabco ABS/EBS fren sistemi - Yaklaşık 400 mm yüksekliğinde çelik ön duvar - Kuğu boynunda 2 yan kapak - RAL 3000 kırmızı, tek renk boya

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 9.000 kg, azami yük ağırlığı: 29.000 kg, toplam ağırlık: 38.000 kg, ilk tescil: 08/2020, renk: kırmızı, Üretim yılı: 2020, ES-GE 2-Axle Lowbed, non-extendable, Tridec Steering Gross weight: 38,000 kg Axle load (2 x 10,000 kg): 20,000 kg Fifth-wheel load: 18,000 kg Unladen weight +/- manufacturer's tolerance: approx. 9,000 kg Payload: approx. 29,000 kg Overall length: approx. 13,650 mm Overall width: approx. 2,540 mm Loading platform length: approx. 13,200 mm Loading platform width: approx. 2,540 mm Front overhang: approx. 1,200 mm Front radius: approx. 1,750 mm Swing radius (tractor unit): approx. 2,100 mm Coupling height: approx. 1,150 mm B-dimension: approx. 12,000 mm Raised bed length: approx. 3,700 mm Raised bed loading height: approx. 1,480 mm Lowbed length: approx. 6,500 mm Lowbed loading height: approx. 250 mm Lowbed ground clearance: approx. 100 mm Loading height above axle assembly: approx. 3,000 mm Tractor unit details A-dimension: approx. 4,500 mm Coupling height: approx. 1,150 mm Swing radius: approx. 2,100 mm Chassis: - Chassis manufactured from high-quality fine-grain steels - Lowbed in rigid construction - Axle assembly not detachable - Without excavator trough Kingpin - 2" kingpin Landing legs - Without front landing gear Axles - 2 x 10,000 kg axles (17.5"), technically rated at 12,000 kg each – brand: Gigant - Enclosed drum brakes, asbestos-free brake linings - Automatic slack adjusters, centralizing device - Axle spacing approx. 1,360 mm Suspension - Air suspension with lift and lower system - Second ride height for air suspension (+ approx. 30 mm) Steering - Hydraulic axle steering - All axles steered, make "Tridec" Tyres - 9 tyres 245/70 R 17.5, load index 146/146 F – tyre brand: Continental - Steel rims Brakes - Dual-line air brake system according to EC directive, make "Knorr" - Automatic load-dependent brake force regulator - Operated via standard air couplings, red/yellow, acc. ISO 1726 - Electronic brake system (EBS), 7-pin socket acc. to ISO 7638, mounted at the front, acc. to EU regulations. With ABS 4S/2M - With RSS (Roll Stability Support) - Parking brake with spring-loaded cylinder - 4 wheel chocks with holders - Without connecting hoses (Wendeflex) to tractor - Aluminium air tanks - TIMG2 (Trailer Information Module) installed for current axle load readout Rear underrun protection - Integrated into the rear end plate Side frame Crjdsu U Np Tjpfx Aldob - Side frames made of UNP steel, approx. 200 mm Load securing - 13 lashing points per side with 13,400 kg tensile force, foldable outwards, mounted on the outer frame - 1 pair of lashing rings with approx. 13,400 kg lashing capacity in the rear area of the gooseneck, approx. 400 mm above the ground - 1 pair of lashing rings with approx. 13,400 kg tensile force at the rear of the lowbed at the vertical neck - 7 stake pockets per side on the inside of the outer frame for bolsters approx. 80x50x4 mm, evenly distributed along the loading platform - 6 stake pockets per side welded externally onto the longitudinal beam Floor - Approx. 28 mm hardwood floor with Omega profiles, fitted between the longitudinal beams - Chequer plate (approx. 8/10 mm) above axle assembly Bulkhead - Designed as a toolbox with lid, approx. D 400 x H 450 mm, spanning the full width of the loading platform, corners chamfered Side panels - 3 removable, anodised side panels on the gooseneck, approx. 2,440 x 400 mm - Removable stanchions at rear, galvanized Finishing - All steel parts shot-blasted - Chassis spray-galvanized Paintwork - Primer and single-color coating in RAL 3002 flame red - Axles and landing gear KTL-c

Koşul: yeni, makine/araç numarası: 087c7b6bc0c6118a84279fb46, boş ağırlık: 4.100 kg, Further Information Frame Steel welded construction made of fine-grained steel, hot-dip galvanized, flat platform without raised edges, load area beveled downward by approx. 8° behind the rear axle. Longitudinal beams made from steel profiles. Steel frame hot-dip galvanized, with stainless steel plate at the bending point as rope guide—flush with the floor. For trucks with wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1,350 mm. Towing Coupling Towing coupling ball head D24.8: (height from ground to top approx. 480 mm), towing capacity 2,800 kg, incl. installation and electrical wiring with 7-pin socket. Accessories/Modifications 2 holders for wheel chocks, foldable aluminium side underrun protection – transferred from the truck! Steel underrun protection, quarter-shell mudguards with mudflaps – transferred from the truck! Storage Boxes Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with padlock (padlock not included). 1 holder for 3 fuel canisters. 1 stainless steel storage box, w=600 / h=400 / d=500 mm, with polished door, lockable, contains control valve and electrohydraulic pump unit. Control box with circumferential door seal and sealing sleeves on rear (splash proof according to technical feasibility). Electrics Adjustment of existing taillights, 2 additional LED work lights recessed into front wall, switched via parking light with switch on outer front wall left side, 1 LED work light at rear, with integrated reversing camera incl. color flat screen monitor, monitor with suction cup mount and 24V power supply, voltage converter 24/12V, 1 7-pin 12V socket = plug adapter. Floor Mega Grip galvanized serrated grating, steel grating 50/4 mm incl., mesh size 50 mm. Top side with anti-slip serration, continuous over the entire main frame platform. Lashing Rings 12 pairs of pivot-mounted lashing rings on the outer frame—each rated 10 tons. One at the very front and one at the very rear. One lashing ring at the very rear in the center for winch cable attachment. 12 lashing points recessed centrally in the floor, each rated 5 tons (not included in rear bevel). Codpfji Riytex Aldorb Headboard Headboard made from steel sheet, height 1,500 mm. Fixed, with corner posts the height of the front wall. Each with 2 x 12 suspension brackets for lashing chains on left and right sides of the headboard. Winch Electric winch, 24 volt, pull rating approx. 6,350 kg, mounted centrally at headboard (recessed into loading platform), operated by radio remote control, rope length min. 35 m x 9.5 mm, with roller fairlead, with rope pressure plate, incl. overload protection, freewheeling clutch, hand control with approx. 5 m control cable, winch certification, civil engineer test report, inspection book, operating manual. Ramps Length 3,500 mm – 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg/pair (also during ramp loading), electrohydraulically foldable and laterally adjustable – incl. electrohydraulic pump unit. Ramp angle approx. 8° with lowered rear axle. Ramp base made of hot-dip galvanized steel grating (same as loading platform), with anti-slip serration. Ramps can be contracted to approx. 170 mm, hydraulic ramp extension. Ramp prepared for operation at loading docks with full load capacity. Ramp locking with 2 tension straps. Ramp tip offset (nose min. 150 mm) suitable for resting on loading ramps. Ramp operation labeling. Descent brake valve for lowering ramp. Support Height-adjustable support legs at rear, foldable a

Koşul: yeni, azami yük ağırlığı: 28.600 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı hacmi: 25 m³, Üretim yılı: 2025, Brake system: * Wabco EBS-E / ABS (electronic brake system with RSS) * Emergency release device for spring brake cylinders * 22.5" disc brakes * Paver brake with shortened rear mudguards and manual paver switch ---Axles: * 3 x 9 t BPW or SAF axles * Lift axle with traction aid ---Suspension: * Air suspension with automatic lowering during tipping procedure (to increase stability, can be deactivated for overhead pavers) ---Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 1 x 15-pin trailer socket * Eco-LED II lighting with protective roof * 1 x additional LED work light * Flashing side marker lights ---General fittings: * Aluminum air tank * Telescopic steel landing legs with plate foot (can only be disconnected when unladen) * 4 m aluminum access ladder stored on the right side above the mudguards * Enclosed individual plastic mudguards * Folding underrun protection * Rear towing eye * Folding access ladder at the front left side * Document box on the front wall ---Chassis: * High chassis frame made of high-strength, fine-grained steel with Meiller-specific torsion cross members ---Tipping body: * Half-shell rear tipping trough made of STEELECT 450 steel -HBW 450- * Front hydraulic ram with medium working pressure * Front wall with 600 mm front canopy as tarpaulin carrier * Side walls with robust, continuous, inward-facing top rail * Overlapping tailgate with rubber seal and 2 additional toggle latches, as well as automatic 2-hook locking Crjdpfow Eg D Tox Aldjb ---Steel thickness of floor, side, front and rear walls: * Front, side, and rear walls 4 mm * Front and rear walls angled * Tailored floor 5 / 6 mm ---Tarpaulin: * Electric sliding tarpaulin -RAL 9006 white aluminum- with manual switch on chassis and radio remote control ---Loading volume: * About 25 m³ ---Fifth wheel height: * Unladen approx. 1,350 mm * Laden approx. 1,340 mm ---Paintwork: * Chassis painted in RAL 7021 black grey * Tipping body in RAL 9006 white aluminum ---General fittings: * --Permissible gross weight technically possible: 39,000 kg-- * Subject to errors and prior sale * New vehicle with manufacturer's warranty ---Delivery time: * Immediately available ex Egestorf

Koşul: ikinci el, azami yük ağırlığı: 31.800 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2007, Donanım: ABS, * Inquiries welcome via WhatsApp * Semi-trailer for interchangeable compactor containers * Manufacturer: H&W * Type: HWDCSS39 * Disc brakes * ABS * Lifting axle * Steering axle * Hydraulic extension cylinder * 4 x container locks (Twistlock) * Tare weight: 7,200 kg * Tires: 385/55R22.5 approx. 80-70-80% * German vehicle * List price: €73,000 * Net sale within the EU only with VAT deposit and proof of registration in the destination country (confirmation of arrival) * Sale only to businesses, delivery to port possible * This offer is non-binding and subject to prior sale. Errors and interim sale excepted. Crjdohy R Swopfx Aldeb * No warranty for input errors. Viewing by appointment only, via WhatsApp

Koşul: ikinci el, boş ağırlık: 9.140 kg, azami yük ağırlığı: 28.860 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 01/2007, yükleme alanı uzunluğu: 11.600 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235/75R17.5, renk: kırmızı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Araç konumu: yolda / sevk halinde, 2 akslı, havalı süspansiyonlu, son aks yönlendirilebilir, ABS (kilitlenme önleyici sistem), 3 metreye kadar genişletilebilir, bağlantı halkaları, hidrolik rampalar, arka destek, yan alüminyum sürüş koruması, destek ayakları, çift lastikler. Cjdpfeyzgndex Aldjrb Kasa: Hidrolik rampa donanımlı 2 akslı alçak şasi treyler. Tüm bilgiler teminat verilmeksizin, treyler sevk halinde olduğundan değişiklik, ara satış ve hatalar saklı tutulur! AKSESUAR BİLGİLERİ İÇİN GARANTİ YOKTUR, değişiklik, ara satış ve hatalar saklıdır!

Koşul: ikinci el, Üretim yılı: 2000, ES-GE 4.vod-25-40.4-h13. Baujahr: 2000. 10-Tonnen-SAF-Achsen. Eigengewicht: 16.840 kg. Nutzlast: 45.660 kg. Gesamtgewicht: 62.500 kg. Sattellast: 22.500 kg. Crsdpfxoy Ay Efo Aldjb 2-fach ausziehbar: 10,4 Meter + 9,3 Meter = Gesamt 19,7 Meter ausziehbar. Hydraulikversorgung über NATO-Kupplung vom Zugfahrzeug. Servolenkung mit 4 gelenkten Achsen. Luftfederung. Werkzeugkästen. Abmessungen Ladefläche: Länge: 16.000 mm. Breite: 2.550 mm. Höhe: 1.500 mm. Sattelhöhe: 1.250 mm. Bereifung: 275/70R22,5, Profil 80%. Deutscher Auflieger! ID-Nr.: 487. Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für alle Anzeigen, Angebote und Offerten sowie für sämtliche Verträge und den ihnen vorausgehenden Verhandlungen. Mit einer Kontaktaufnahme erkennen Sie die Gültigkeit der Allgemeinen Geschäftsbedingungen an und bestätigen deren Kenntnisnahme. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2000 Leergewicht: 16.840 kg Zuladung: 45.660 kg zGG: 62.500 kg Ausziehbarer Aufbau: Ja = Firmeninformationen = Für weitere Informationen: WhatsApp:

Koşul: yeni, Üretim yılı: 2026, Equipment: BDF ZAA 2-Axle Swap Body Chassis 1120-1320 * Distance between twist-locks (width): 2259 mm * Distance between twist-locks (length): 5853 mm * Wheelbase: 1420 mm * Support height: 1120-1320 mm * Special lift: 450 mm * Ride height: approx. 1110 mm * Tyres: 385/55R22.5, new * Coupling eye height: 400 mm * Gross weight: 18,000 kg Csdoyv Ttijpfx Aldsrb * Manufactured according to EN 284 for C745/C782, new * Tare weight: 3270 kg * Rubber-steel rear impact bumper * Guide rollers – 2 pairs * Bolted towing bar, non-adjustable in length * Side underrun protection made of steel, Wielton design * Support height: 1120 - 1320 mm * Frame made of high-strength S700 steel, hot-dip galvanized. Container carrier with individual locking devices (twist locks) for securing swap bodies. * Wheelbase: 1420 mm * Coupling eye Ø50 mm, height adjustable * Rear underrun protection made of steel, galvanized * Adjustable front bumper, suitable for C745 / C782 bodies * Steel lamp bracket * Axles and suspension * Number of axles: 2 * BPW axles 2x 9000 kg 22.5 with disc brakes. * Large air suspension stroke (450 mm). * Landing legs * 2 SAF steel crank-type landing legs at the front * 2 SAF steel crank-type landing legs at the rear * Mudguards * Single wheel mudguards, plastic * Rims * 4x steel rim 22.5-11.75 ET-120 * Tyres * Hankook tyres 385-55-22.5 * Other chassis equipment * Marker plates as per ECE * Wheel chocks with handles, installed * Two toolboxes (145 l Aberg), fitted on both sides in front of the axles * Brake System/Pneumatics * Wabco braking system with basic modulator with RSS/RSP * Steel air tank * Duomatic connection * HS valve, fitted in front of the axles on the left side (driver’s side) * Chassis paintwork * Frame hot-dip galvanized * Electrical system * Partial-LED lighting by Aspöck – EUROPOINT III * Hybrid lamp version (LED + bulbs). * Position lights in LED technology. * Other functions with bulbs. * Connection lines swivel arm right side (passenger side) * Electrical connectors: 15-pin and EBS. System meets ADR requirements * LED work lights controlled via a switch on the HS console: 5 LED lights at the rear (2 on each side, behind axles), LED lights at the front (2 on each side, in front of axles), centrally mounted LED light (1 unit, in front of the rear container carrier) * The system is developed for semi-trailers and trailers, and is used for monitoring the tyre pressure and temperature of the vehicle. Manufacturer: ABERG Connect. The system consists of TPMS sensors (for tyre pressure and temperature) fitted to the rims and a device connected to the EBS. * Suspension lift relief system (Bounce Control) * Marking * Partial contour marking with Wielton logo * Partial contour marking, sides in white * Partial contour marking, rear in red * Warranty period for ON-ROAD / OFF-ROAD products * 24 months for the complete product from date of first registration * 36 months on the vehicle frame from date of first registration (excluding surface rust) * 10 years warranty against chassis perforation corrosion (understood as rust forming from inside to outside) * Guarantee: 24 months from registration, excluding wear parts, subject to a technical inspection after 12 months. The respective axle assemblies are warranted according to the axle manufacturers’ terms. * Delivery ex EBB, Heilbronn All information subject to change without notice. Errors and prior sale excepted.

Koşul: ikinci el, azami yük ağırlığı: 26.910 kg, toplam ağırlık: 38.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2008, Üretim yılı: 2008, * Dahili No: 97 * Şasi No: VAVSAP3388H2755448 * Üretici: Schwarzmüller * Araç tipi: Yarı römork * Model: SPA 3/E * Kasa: Kayar brandalı / Tautliner * Aks sayısı: 3 * Uzunluk: 13,60 m Donanım ve Özellikler: Cjdpsy Ebhyjfx Aldjrb * Kayar branda * Tautliner üst yapı * 3 dingilli Fiyat: * Net

Koşul: ikinci el, azami yük ağırlığı: 15.300 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2013, bir sonraki muayene (TÜV): 02/2026, yükleme alanı uzunluğu: 8.670 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 3.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2013, Donanım: ABS, WS Trucks GmbH: Your Reliable Partner for Commercial Vehicles Expertise and Service from a Single Source WS Trucks GmbH is your trusted partner for the purchase and sale of commercial vehicles. With over 25 years of experience, we offer an extensive range of used and new trucks, livestock carriers, refrigerated vehicles, trailers, and semi-trailers. --- Robust Menke-Janzen Tandem Low-Bed Trailer for Professional Livestock Transport. Engineered for efficiency with thoughtful features, high payload capacity, and perfectly suited for tractor towing. Features & Highlights * 2-deck low-bed livestock trailer * Low loading ramp * High interior standing height * Drinking water system on both decks * 3 axles * Independent generator unit * 24 batteries – fully self-sufficient operation * Very high payload: approx. 15,300 kg * K80 towing eye – ideal for tractor use * Sturdy, field-proven construction for daily operation * Tyres: 60% tread remaining Loading Area Dimensions 1st Deck: * Length: 8,670 mm * Width: 2,450 mm * Height: 1,800 mm 2nd Deck: * Length: 8,670 mm * Width: 2,230 mm * Height: 1,800 mm Subject to errors and prior sale --- Our Services for You: * Tailored Consultation: We take the time to understand your requirements and find the right vehicle for you. * Financing: We offer attractive financing and leasing options. * Trade-Ins: We provide fair evaluations and accept your used vehicle as part payment. * Registration & Deregistration: We handle the full registration of your new vehicle and deregistration of your old one. * Complete Export Handling: We take care of the entire customs process. * Maintenance & Repairs: Our professional workshop takes care of all your maintenance and repair needs. Your Advantages: * Expertise: We are commercial vehicle specialists with in-depth market knowledge. * Reliability: We keep our promises and provide hands-on support and guidance. * Service: We offer comprehensive, single-source service. * Quality: We only offer high-quality vehicles from renowned manufacturers. Our Core Competence: Livestock and Meat Transport Vehicles * Extensive Know-How: We understand the specific demands of livestock and meat transport and will gladly advise you on the right vehicle selection. * Wide Selection: We offer a broad range of vehicles from various manufacturers and price categories. * Quality: We offer only high-quality vehicles from reputable manufacturers. * Comprehensive Service: We provide a complete solution from consultation and financing to maintenance and repair. Krone Trailer Partner WS Trucks GmbH is a Krone Trailer Partner. As a Krone Trailer Partner, we offer a large selection of new and used Krone semi-trailers. Menke-Janzen Partner WS Trucks GmbH is also a partner of Menke-Janzen Fahrzeugbau. As a Menke-Janzen partner, we provide a wide selection of new and used livestock transporters. We assist in the planning and realization of your new livestock transporter from 3.5 t to 40 t. For More Information: Website: Codpfx Alox Surxodjrb Phone: Email: WS Trucks GmbH: Your Partner for Commercial Vehicles

Koşul: ikinci el, azami yük ağırlığı: 36.250 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2015, yükleme alanı uzunluğu: 12.350 mm, yükleme alanı genişliği: 2.490 mm, yükleme alanı yüksekliği: 800 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.030 mm, Donanım: ABS, Meusburger platform dorse, 3 dingilli Tip: MPS-3 Cjdpfsy Iibtex Aldsrb Fren: Disk fren Yük kapasitesi: 36.250 kg Dingil: BPW 1x kaldırılabilir dingil 2x destek noktası Platform: Uzunluk: 12,35 m Genişlik: 2,49 m Yükseklik: 0,80 m Finansman/leasing konusunda da iş ortaklarımızla sizlere memnuniyetle destek sağlıyoruz. Tüm bilgiler taahhütsüzdür. Hata ve ön satış hakkı saklıdır.

Üretim yılı: 2005, Koşul: ikinci el, - Kilitlenme Önleyici Fren Sistemi Credpfx Alexzpzwsdsb

Koşul: ikinci el, boş ağırlık: 6.420 kg, azami yük ağırlığı: 23.580 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2012, bir sonraki muayene (TÜV): 09/2026, süspansiyon: diğer, lastik boyutu: 235/75 R17,5 ---/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R17,5 ---/140J, arka lastik boyutu: 235/75 R17,5 ---/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Bağlantı halkaları, direk cepleri, -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler -- Daha fazla veri için: !, Daha fazla detay: ! Cjdpfey Niw Rox Aldsrb

Koşul: yeni, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.200 mm, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Toplam yükleme alanı uzunluğu yaklaşık: 8.200 mm, alçak yatak yaklaşık: 6.000 mm uzunluğunda, yüklü yükseklik yaklaşık: 890 mm, 22 x her biri 10 tonluk bağlama halkası, dış çerçevede 10 x dikme cebi, rampa (yaklaşık 3.100 x 750 mm), rampaların ve arka eğimin dış kısmında tırmanma çıtası, rampalar yandan ayarlanabilir, 68 mm kalınlığında ahşap zemin, yük zincirleri veya gergi kayışları için kapaklı saklama kutusu, yönetmeliğe uygun dış hat işaretlemesi, tepe lambası, araç daldırma ile sıcak daldırma galvanizli, aks yük göstergeleri dahil, ek ücretli: aydınlatmalı ve tepe lambalı uyarı levhaları, ahşap ile 3 m’ye genişletme, fiyat: 500 €, ekskavatör kol için oyuk, fiyat: 1.000 € net. Baskı hataları, değişiklikler ve yanlışlıklar saklıdır, örnek resimlerdir. Daha fazla bilgi: !, Detaylar: ! Credpfx Aloy Niv Hedjb

Koşul: yeni, boş ağırlık: 6.950 kg, azami yük ağırlığı: 24.050 kg, toplam ağırlık: 31.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.500 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Şasi: Sıcak daldırma galvanizli, 70 mm kalınlığında ahşap taban, 18 bağlama halkası, 12 dikme cebi, 2 adet 3.110 mm uzunluğunda x 760 mm genişliğinde rampa, hidrolik tek parça rampalar, yükleme yüksekliği: 880 mm, aks yük göstergeleri dahil. Ek ücretler: Son aksı yönlendirici olarak: 3.500 €, uyarı tabelaları + aydınlatma ve döner ışıklı lamba: 200 €, ahşaplarla 3 m'ye genişletme: 300 €, rampaların hidrolik kaydırılması: 1.000 €, yan ve ön paneller: 3.500 €. K80 çekme gözlü olarak da temin edilebilir! -- Yazım hatası, yanlışlık ve değişiklik hakkı saklıdır, örnek görseller -- Daha fazla bilgi için lütfen iletişime geçin! Credpfey Nivgjx Aldjb