Açık yarı römork

Fliegl 3-Achs Jumbo Sattelauflieger Plateau

Chassis semi-trailer for freight forwarding
Rsdpsza A Txsfx Aiwju
Fine-grain steel welded construction, fifth wheel plate with exchangeable 2" kingpin
Outer frame in a new, slightly angled design with “Load-Lock profile” for lashing strap attachment
24 t. 2-speed landing gear, single-side operation, with straight lower part, without compensating slide
Free landing gear foot distance or free rear swing radius approx. 1,920 mm
2 wheel chocks with holder
Aluminum side underrun protection
Steel rear underrun protection
Quarter shell mudguards in front of and behind each axle
Splash flaps in front of the 1st axle and behind each axle with anti-spray, EU-compliant
1 plastic toolbox, W=600 / H=425 / D=460 mm, lockable. (Lock not included)
Axles & Suspension
SAF drum brake axles
"Laser measured axles/chassis": reduces tire wear and fuel consumption
Air suspension
1st axle automatic lift axle including forced lowering and starting aid, operation via "3x braking" (starting aid function active up to axle load exceedance of 30% and up to a maximum speed of 25 km/h)
Axle lift below recommended driving height, therefore no warranty for tire damage
Braking system
2-line compressed air braking system
Color-coded line routing for easy service
Spring-actuated parking brake
2 anti-mix coupling heads at the front, without connecting line
EBS, electronic braking system with front EBS socket, without connecting line
Attention: The trailer may only be towed by tractors which ensure effective ABS operation!
With raise & lower valve
Vehicle stability control system
Wheels and tyres
235/75 R17.5, brand at the manufacturer's discretion
Steel rims, factory silver
Electrics
24 Volt, multi-chamber lights, yellow LED side lighting
2 white front position lights
2 white/red lane marker lights at rear
2 x 7-pin and 1 x 15-pin anti-mix sockets at the front, without connecting lines
Floor
Approx. 30 mm thick phenolic resin-coated plywood, high point load capacity for forklift axle load up to max. 5,600 kg
Front wall / corner posts
25 mm aluminum hollow profile, 1,350 mm high, steel corner posts in volume design
Country of registration / plates
Germany
With Dekra inspection certificate (in accordance with §13 EG – FGV)
24/7 service hotline
Prepared for single-line license plate holder
Contour marking with reflective tape according to ECE R 048, white on sides and red at rear
Paint
Frame: DB 7350 Nova grey
Front corner posts: hot-dip galvanized
Front wall: aluminum

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.