Kullanılmış Fliegl 3-Achs Holzrungensattel Sds 390 L=13,5M satın al (60.956)

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902028859, boş ağırlık: 5.660 kg, azami yük ağırlığı: 29.340 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, toplam uzunluk: 13.700 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.700 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", lastik durumu: 100 yüzde, renk: kırmızı, Chassis semi-trailer for forwarding/logistics Steel welded construction in reinforced design, only 2 longitudinal beams as double-T beams with steel/chequer plate between the beams, fifth wheel plate with replaceable 2" king pin. Rear light protection fender. 8 pairs of lashing eyes bolted or welded to the frame, at the manufacturer’s discretion 24-ton, 2-speed landing gear, single-side operation, with straight base, no sliding compensation Wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, hot-dip galvanized steel Half-shell mudguards with anti-spray flaps according to EC regulations 1 spare wheel holder for 1 spare wheel, with wheel mounting kit 1 toolbox recessed between the longitudinal beams 8 timber stakes as per manufacturer’s choice, bolted to the frame, each with 2 telescopic timber uprights extendable from 1800 mm to 2800 mm, 7 tons per pair Axles & Suspension BPW disc brake axles with 430 mm disc diameter Air suspension with lift & lower valve, safety cable on the axles 1st axle is an automatic lift axle including forced-lowering and starting aid, operated by “3x brake application” (the starting aid functions up to 30% axle overload and up to max. 25 km/h) Axle spacing offset 1410/1310 mm (suitable for combined transport), up to 44 tons gross train weight Wheels and Tyres 385 / 65 R 22.5" Manufacturer’s choice Steel rims, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake Axle load detection via EBS CAN bus signal, display in cab (the truck must be pre-equipped, not installed on the truck, not a calibrated scale) 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer must only be towed by vehicles that ensure the effectiveness of the ABS! "Safe Parking" Electrical System 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable Bdjdpfoza Anvox Ah Nsc Front bulkhead/corner stanchions Steel/mesh bulkhead, approx. 2,300 mm high, bolted to frame Approval / Plates Country of registration: Germany Approval in accordance with EC 2007/46 Prepared for single-line number plate holder Outline marking with reflective tape as per ECE R 048, white on the side, red at the rear Warning signs as per ECE-70 Paintwork Frame: DB 7350 Nova grey Landing legs: black coated Front bulkhead: hot-dip galvanized

Koşul: yeni, dingil konfigürasyonu: 3 dingil, renk: gri-siyah, vites türü: mekanik, Color natural, lift axle, electronic braking system (EBS), 1x 15-pin connector, features: outer frame slightly angled, new design with "Load-Lock profile" for lashing strap attachment, 13 additional pairs of lashing rings in the outer frame, each rated at 5 to 24 tons. 2-speed landing gear, single-sided operation, with half-round lower section and straight steel forklift collision guard on outer frame (side and rear). 1 spare wheel holder for 1 single tire, including wheel fastening kit. 1 plastic toolbox (650mm x 520mm x 670mm). 7 pairs of stake pockets recessed into the outer frame, 83 x 83 mm. SAF disc brake axles with 430 mm air suspension. First axle as automatic lift axle, including forced lowering function and starting aid, operated by 3x brakes. Wheels and tires: 6 x 385/65 R22.5, manufacturer: 6 steel rims, factory silver. Floor made from ca. 30 mm film-coated plywood panels, cross joints with omega inserts for high point loading capacity, suitable for forklift axle load up to max. 7,100 kg. Front bulkhead/corner stanchions made from 25 mm aluminum hollow profile, 1,950 mm high, corner stanchions in high-volume steel version + 2 additional center supports ("crash-blockers"), bottom inside at approx. 140 mm height. Side walls: 25 mm aluminum hollow profile, 700 mm high. Frame painted: hot-dip galvanized incl. passivation ("15 years anti-corrosion warranty"). Side walls: aluminum anodized. Errors and changes excepted. Bdedpfetcwmisx Ah Nsc

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT34202038273, boş ağırlık: 5.680 kg, azami yük ağırlığı: 29.320 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.680 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5", lastik durumu: 100 yüzde, renk: gümüş, Chassis Semi-Trailer Forwarding Fine-grained steel welded construction in reinforced Scandic design, fifth wheel plate with replaceable 2" kingpin Outer frame in low loader design: 7 pairs of lashing mushrooms embedded on top and side of the outer frame, each rated for 10 t 10 pairs of combination stake pockets with ring lashing eyes (bolted), each rated for 5 t, embedded in the outer frame, approx. 72 x 42 mm internal dimensions Outer frame with 'Load-Lock Profile' for lashing strap hooks, with holes approx. every 400 mm 24 t, two-speed landing gear, single-side operation Free swing radius to landing leg approx. 2500 mm, landing leg spacing approx. 2600 mm Telescopic ladder at the rear 2 wheel chocks with holder Side impact protection, aluminium Underrun protection, galvanized steel Rear mud flaps across full width Quarter shell fenders before and after axle assembly with anti-spray mud flaps only on last axle 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable in front of axles 1x on driver's side and 1x on passenger side 1 storage box, full width, closed, underneath the loading deck, approx. w=450 mm / h=400 mm / d=2460 mm mounted directly in front of axles 3 lashing/stake rails with 4 pairs of locking slots, installed crosswise in the floor over the full width up to the outer frame (max. usable internal width between the outer removable stakes approx. 1782 mm), approx. 80 mm high. With cut-outs on top and bottom for lashing and inserting stakes 80 x 80 mm. Bottom partially open downwards with angle bracket as stop. Combined design for 2 x 20 ft or 1 x 40 ft container, 4 pairs of container locking adapters 10 combination removable stakes with cut-out at the bottom W=80/D=50/L=1200 mm 6 removable stakes W=80/D=80/L=1200 mm, hot-dip galvanized Axles + Suspension BPW disc brake axles with 430 mm disc diameter Air suspension 1st axle automatic lift axle, additionally electric control from the truck, including forced lowering and start-up aid Brake system 2-line compressed air braking system Spring-loaded parking brake 2 foolproof coupling heads at the front 24 Volt EBS, electronic braking system with EBS socket at the front Note: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! with Raise & Lower valve + auto-reset function Vehicle stability control system Axle load detection via EBS CAN-bus signal, display in driver’s cab Wheels and Tyres 385/65 R22.5" Steel rims 'RDKS' Tyre Pressure Monitoring System in accordance with ECE R 141, display in towing vehicle, via EBS Electrics 24 Volt, multi-chamber lights, side yellow LED lighting side yellow LED lighting linked to indicator "Flashing side marker lights" 2 white LED position lights at the front 2 white/red lane control lights at the rear 2 x 7-pin and 1 x 15-pin foolproof sockets at the front 2 additional LED work lights at the rear 1 LED beacon with bracket 2 pairs of LED warning signs illuminated and extendable up to 3,000mm 2 additional LED work lights on top of the front bulkhead additional 7-pin socket in the rear underrun protection Floor Anti-slip phenolic plywood panels approx. 30 mm thick, high point-load capacity for forklift axle loads up to max. 7,900 kg 'Premium floor sealing' throughout, floor all-round jointed Front Bulkhead / Corner Posts Bdedpfozbbpuex Ah Nsc 25 mm aluminium hollow section, 1,350 mm high, steel corner posts in volume version Front bulkhead additionally lined inside with 1,250 mm high phenolic plywood panel 'Crash-blocker', steel i

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33801013475, boş ağırlık: 7.180 kg, azami yük ağırlığı: 28.820 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5", lastik durumu: 100 yüzde, renk: gümüş, multiple units available. Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin, additional spray guard as sheet metal riveted underneath the floor, at the neck area above the rear axle of the tractor unit as well as above the wheels on the vehicle, chassis in reinforced design for vehicle loading up to the outer frame, outer frame with 'Load-Lock profile' approx. every 400 mm for lashing strap hooks, 10 pairs of lashing mushrooms recessed on the top/outside of the outer frame, each rated at 10 t, 24 t 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with transverse compensator, folding rear support, wheel chocks with holders, aluminium side underrun guard, steel rear underrun protection, quarter shell fenders before and after each axle, with additional sheet metal spray guard above the wheels, EG-compliant anti-spray mud flaps, 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable, container locks, 4 pairs of lock recesses integrated into the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container lock adapters (additional cross supports at the front and rear of the container are required, the container must rest evenly along its width in conjunction with the locks, cross supports are not included in the delivery), loading edge for approach ramps at the full width of the rear extension, mechanical hand-crank rear extension extendable by approx. 1,500 mm, lockable every 500 mm, incl. extendable rear underrun protection with lighting. Lane area fitted with Lohr anti-slip grating, steel chequer plate in the center, integrated storage compartment for ramps in rear extension (usable only when rear extension is extended by approx. 1,000 mm); for transporting ramps with the rear extension retracted – ramp storage compartment in FR-right located in front of the axles. 1 pair of ramps, 3,000 mm long, 300 mm wide, load capacity per pair 6,000 kg, electric cable winch, 24 volts, pulling force approx. 8,165 kg, mounted centrally at the very front, operated via radio remote control, cable length 35 m x approx. 10 mm, with roller fairlead and removable guide rollers. Bdodpfx Ajza Aiyjh Njc Axles & Suspension: SAF/BPW drum brake axles, manufacturer’s choice, air suspension, first axle lift axle, additionally electrically operated from the truck, including forced lowering and starting aid. Braking system: 2-line compressed air braking system, color-coded line installation for easy service, spring-actuated parking brake, 2 foolproof coupling heads at the front, EBS (Electronic Braking System) with front EBS socket, without connecting cable, with raise & lower valve with quick release, holding function in lowered position + auto-reset function, vehicle stability control system, axle load detection via EBS CAN bus signal. Wheels and tyres: 235/75 R 17.5" manufacturer’s choice, steel twin wheels. Electrics: 24 volts, multi-chamber LED lights, side yellow LED lighting, LED license plate lighting, 2 white LED position lights at the front, 2 white/red LED lane marking lights at rear, 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with bracket, operated via parking light, 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm, 1 additional 7-pin socket (according to ISO 1724) in the rear underrun protection, 2 LED work lights at the sides (1 FR-left, 1 FR-right). Floor: Lohr anti-slip flo

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33801012811, boş ağırlık: 6.350 kg, azami yük ağırlığı: 28.650 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 435/50 R19,5", lastik durumu: 100 yüzde, renk: gümüş, Multiple units available Chassis – Semi-trailer for freight forwarding: Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin, frame in reinforced design for vehicle loading, outer frame with "Load-Lock profile" approx. every 400 mm for lashing strap attachment, 10 pairs of lashing mushroom anchors recessed in the outer upper frame, each rated at 10 t, foldable rear support, 2 wheel chocks with holders, aluminium side underrun protection, galvanised steel rear underrun protection, quarter fenders in front of the 1st axle and behind each axle, with anti-spray mudflaps behind each axle, 1 spare wheel holder for 1 spare wheel, with wheel fastening kit, 2 plastic toolboxes (W=600 / H=425 / D=460 mm), lockable, container locking system, 4 pairs of twistlocks recessed in the floor for 2 x 20-foot or 1 x 40-foot containers, front position as fold-down recessed lock, 10 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm, 10 stake pockets centrally recessed in the floor (70 x 40 mm), 2 transverse lashing/stake rails recessed across the width of the floor up to the outer frame (usable internal width between outer stanchions approx. 2170 mm), approx. 100 mm high, equipped with 20 mm round bar rails (top and bottom), vertical clearance approx. 60 mm (between round bars), bottom closed off with angle iron – half open downwards. For lashing and inserting stakes (80 x 80 mm). Arrangement: Positions 2 and 4 as per Fliegl data sheet, 20 plug-in stanchions, hot-dip galvanised, storage compartment for aluminium ramps, ramps can be inserted from the rear, 3 pairs of foldable lashing rings (10t) integrated in the outer frame (1 x front wall, 2 x at rear). Bsdeza Agropfx Ah Njdc Axles & Suspension: SAF disc brake axles, air suspension, 1st axle with automatic lift axle, including forced lowering and start assist, operated by "braking 3x", axle lift below recommended driving height, therefore no guarantee for tyre damage Brake System: 2-line pneumatic brake system, color coded airlines for easy servicing, spring-loaded parking brake, 2 non-swappable coupling heads at the front, no connecting line, EBS (Electronic Braking System) with EBS socket at the front, without connecting cable, with raise & lower valve, 2 ride heights switchable via hand button, 1 x for coupling height 980 mm, 1 x for coupling height 1100 mm, ride height varies with lift axle, raising the lift axle increases loading/overall height by 50 mm, vehicle stability control system Wheels & Tires: 435/50 R19.5, manufacturer at OEM’s choice, steel rims Electrics: 24 volt system, multi-chamber tail lights, side yellow LED lighting, 2 white marker lights (front, LED), 2 white/red lane marker lights (rear), 2 x 7-pin and 1 x 15-pin non-swappable sockets at front, LED work lights on sides (1 left, 1 right), 2 additional LED work lights (rear), 1 rotating beacon with bracket, operated via parking light, 2 pairs of LED illuminated and extendable warning panels (to 4000 mm), additional 7-pin socket on rear underrun Floor: approx. 30 mm phenolic wooden floor panels, mounted on longitudinal subframes for high point load capacity, suitable for forklift axle loads up to max. 7100 kg Front bulkhead / Corner posts: 25 mm aluminium hollow section, 1350 mm high, corner posts steel, high-volume version, front bulkhead internally lined with 1250 mm high phenolic panel, "Crash Blocker", with 140 mm high steel impact guard inside at the bottom, internal storage compar

Koşul: ikinci el, Fonksiyonellik: sınırlı işlevsellik, boş ağırlık: 6.575 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 07/2011, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.300 mm, toplam uzunluk: 13.650 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5, lastik durumu: 30 yüzde, dingil mesafesi: 1.360 mm, Üretim yılı: 2011, Donanım: ABS, Kullanılmış açık yarı römork Uzun demirler için çentikli çelik ön duvar Taban çelik profillerle güçlendirilmiş Yanlarda dikme cepleri Takma dikmeler için depo kutusu Bjdpfx Ahey Ercbo Nsdc

Koşul: yeni, azami yük ağırlığı: 29.500 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.450 mm, yükleme alanı hacmi: 25 m³, toplam genişlik: 2.550 mm, Vehicle is from ongoing production – available in approx. 2 weeks Vehicle / Body: Tipper body Gross weight: 35,000 kg / 39,000 kg Unladen weight: 5,500 kg!!! Payload: 29,500 kg / 33,500 kg Overall length: 8,600 mm Volume: 25 cbm Further information: - Overall height approx. 3,160 mm - Internal width approx. 2,350 mm - Fifth wheel height approx. 1,200 mm Chassis for tipping semi-trailer: - Fine-grain steel welded construction, basic lightweight design - 1 central landing leg - Folding underrun protection - Underrun protection with 'spring assistance' for easier operation - Half-shell mudguards - Integrated 'mudguard bracket', stone-repellent surface - Antispray mudflaps only on rearmost axle - 2 towing eyes at the rear Axles and Suspension: - SAF disc brake axles with 430 mm disc diameter - 'Axles/chassis laser alignment' to reduce tire wear and fuel consumption - Axles in off-road specification - Air suspension - Air spring pressure gauge mounted at front on curved chassis - 1st axle automatic lift axle, additionally electrically operated from the truck, including forced lowering and starting aid, without truck installation (starting aid operates up to axle load exceedance of 30% and up to a maximum speed of 25 km/h) Braking System: - 2-line compressed air brake system, color-coded piping for easy servicing - Spring-loaded parking brake - 2 fail-safe coupling heads at the front, without connecting lines - 24-volt EBS electronic braking system with EBS socket at front, no connecting cable - With lift and lower valve - Vehicle stability control system - Automatic tipper lowering with shut-off valve Bdedpfxovhyf Ro Ah Njc Wheels and Tires: - 6 x 385/65 R22.5", European brand, manufacturer’s choice Electrics: - 24-volt, multi-chamber lights in LED, amber side LED lighting, license plate LED lighting (Note: certain towing vehicles may display diagnostic errors despite proper function) - Amber side LED lighting linked with the indicator, 'flashing side marker lamps' - Premium LED side marker lamps, each with 20 LED diodes - 2 white front position lamps (LED) included - 2 rear white/red lane marker lamps (LED) included - 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cables - Side LED work lights, both sides (switched via reverse light) - 2 additional LED work lights recessed at the rear Hydraulics: - High-pressure cylinder, max. 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed section, NW 48 mm - Brand: Hyva - Hydraulic operation via truck PTO - Hydraulic connection with hose and vehicle screw connector NW = 54 mm with large wing nut Body: HARDOX steel round body in 'Stone Master Design' made from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mount. Integrated access at the front wall. - Greenline – conical and aerodynamic body shape - Shovel and broom holder on external front wall - 'Membrane' rear wall - Rear wall as pendulum tailgate with 'double-joint hinge', external mounting with double hook locking. 2 clamping screws with toggle fasteners at lower sides - Rear wall with rubber seal Note: Heat-resistant up to max. 170°C! - Continuous 4 mm side walls, 4/5 mm floor, wear and weight-optimized design - Fliegl S.T.E.P. – swiveling front standing platform with foldable access ladder for side entry on front-left

Koşul: yeni, azami yük ağırlığı: 26.100 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Vehicle / Body: Low-bed semi-trailer First registration: New vehicle Gross weight: 35,000 kg / 47,000 kg Unladen weight: 8,900 kg Payload: 26,100 kg / 38,100 kg Overall length: 13,300 mm Loading length: 9,200 mm Width: 2,520 mm Loading height: 900 mm Further information: Bodpfsut Idnsx Ah Nodc Chassis low-bed semi-trailer Steel welded construction, fifth wheel plate with replaceable 2" king pin and two king pin positions (not in combination with forced steering) 24 t 2-speed landing gear, single-side operation, straight base, without load equalizer Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width mudflap at rear Mudflaps with antispray in front of the 1st axle and behind each axle, in accordance with EC regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable widening to 3,000 mm (not applicable to rear bevel) (The track width of the construction machinery or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks on neck, transverse at front 70 mm wooden planks for extension to 3,000 mm Excavator arm recess starting over rear axles up to the rear, approx. 3,000 mm long, approx. 650 mm wide, approx. 230 mm deep 2 pairs of lashing holes rated to 5 t each in the excavator arm recess, lateral on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear slope Lashing points low-bed trailer: 11 pairs of lashing mushrooms recessed on top and side of external frame, each rated to 10 t 2 x on gooseneck 9 x distributed on low-bed area 2 pairs of lashing eyes front on gooseneck, each rated to 5 t 3 pairs of swivel lashing eyes on the gooseneck, each 5 t 2 pairs of folding lashing eyes additionally recessed in low-bed area, each 10 t 1 x at the start of low-bed area 1 x at the end of the rear slope 1 pair prepped on gooseneck slope for 6.7 t bolt lashing eye (JDT) 8 pairs of ring lashing eyes recessed in the external frame, each 5 t (convertible to stanchion pockets) 1 pair of bolt lashing eyes each 6.7 t (JDT), with large flange plate incl. thread as counterholder Axles & Suspension: SAF or BPW drum brake axles, at manufacturer's discretion "Axle/chassis laser alignment" reduces tire wear and fuel consumption Last axle self-steering, with automatic reverse lock via reversing light and additional locking function on vehicle via push button Air suspension Wheels and tires: 235/75 R 17.5" At manufacturer's discretion Steel rims in twin arrangement, factory silver Brake system: 2-line air brake system Color-coded hose layout for easy servicing Spring-actuated parking brake 24 Volt EBS, Electronic Braking System with EBS socket at front, without connection cable Note: The trailer may only be towed by tractor units that ensure functioning ABS! 2 mistake-proof coupling heads at front, without connecting line With lift & lower valve Axle load detection via EBS-CAN bus signal, for display in cab, truck must be pre-equipped, not installed on truck (not a calibrated scale) Vehicle stability control system Tire pressure monitoring system to ECE R 141, display via tractor unit display, via EBS, not installed on truck (requirements must be met by the truck) Electrics: 24 Volt, multi-chamber lamps, lateral yellow LED lighting Side yellow LED lights linked to indicator "flashing side marker lights" 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin mistake-proof sockets at front, without conn

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2023, yükleme alanı uzunluğu: 13.700 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 3.000 mm, toplam uzunluk: 13.900 mm, toplam genişlik: 2.600 mm, toplam yükseklik: 4.000 mm, süspansiyon: hava, lastik boyutu: 435/50R19,5, renk: diğer, Üretim yılı: 2023, Donanım: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 3, Unladen weight: 6,080 kg, Gross weight: 39,000 kg, Chassis type: Complete chassis, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body year: 2023, Sliding roof, Axle type: SAF Bdedpfx Ahjy U Ut Uo Noc = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tyre size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Left tyre tread: 9 mm; Right tyre tread: 9 mm Axle 2: Left tyre tread: 10 mm; Right tyre tread: 10 mm Axle 3: Left tyre tread: 8 mm; Right tyre tread: 7 mm Weights Unladen weight: 6,080 kg Payload: 32,920 kg Gross vehicle weight: 39,000 kg Functionality Sliding roof: Yes Environment Emission class: Euro 0 Maintenance APK (Technical Inspection): inspected until 11/2026 Condition General condition: average Technical condition: average Visual condition: average Damages: none Financial Information Leasing price: €334 per month (default, 60 months); please inquire for further details and conditions = Company Information = Kleyn Trucks is one of the world’s largest independent traders of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-moving stock • Recognizable quality • Competitive pricing • Professional business conduct • Multilingual staff • Comprehensive customer understanding • Assistance with import and transport • (Export) licence plates arranged quickly • Expert technical services • The assurance of ‘recognizable quality’ • And more… Please visit our website for special offers and full stock listings: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit your inquiry via our website. Ask us directly about our European warranty package.

Koşul: ikinci el, azami yük ağırlığı: 24.200 kg, toplam ağırlık: 31.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2018, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 13.850 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.860 mm, yükleme alanı hacmi: 93 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Donanım: ABS, Sürgülü taban +/- 93 m³, arka çift kanatlı kapı ve döner çubuk kilidi, üst yapının önünde tırmanma ve durma platformu, branda, "Cargo Floor" taban (21 tahta x 10 mm), sürgülü tabanın altında arkada paslanmaz çelik aşınma plakası, her iki tarafta 12 yük bağlama halkası, tam boşaltma (hareketli ön duvar), içeri/dışarı sürme fonksiyonu, yükleme manometresi, katlanır arka lamba koruması, kablolu uzaktan kumanda, ABS, EBS, BPW Eco Plus aks(lar), kampanalı fren sistemi, destek ayakları, 1x alet kutusu, araç reklam ile kaplanmış ve/veya yazılı olabilir. SI84517 Bedjr Hlvkjpfx Ah Nodc Teklifimiz genel olarak yeni TÜV muayenesi olmadan geçerlidir. Yeni TÜV muayenesi istenirse, partner atölyelerimizin teklifini memnuniyetle sunarız! Araç reklam ile kaplanmış ve/veya yazılı olabilir. Genel teslimat ve ödeme şartlarımız geçerlidir. Bu obje için finansman veya leasing teklifi de memnuniyetle hazırlanır. Lütfen bizimle iletişime geçin!

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33903000211, boş ağırlık: 7.707 kg, azami yük ağırlığı: 27.293 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2023, yükleme alanı uzunluğu: 15.030 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.655 mm, yükleme alanı hacmi: 101 m³, toplam uzunluk: 15.350 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.005 mm, süspansiyon: hava, lastik boyutu: 385/55 R22,5", Üretim yılı: 2023, The images shown are stock photos; the vehicle may still be in use! Vehicle configuration: Chassis: • Semi-trailer, haulier specification • Fine-grain steel lightweight welded construction up to the support legs, fifth wheel plate with replaceable 2" kingpin Bedpfx Ahoy Snmpj Njdc • 24 t two-speed landing gear, single-sided operation, with straight lower section • Rear extension ladder • Side door retainers • 2 wheel chocks with holders • Aluminium side underrun protection • Steel rear underrun protection with wide Fliegl mud flaps • Foldable mudguard for lighting unit • Quarter shell fenders • Rear impact protection • Tarpaulin support bar with holder • 1 plastic toolbox Axles & Suspension: • 3 BPW disc brake axles • 'Axles/Chassis laser-aligned' for reduced tyre wear and fuel consumption • Air suspension Brake system: • Two-line compressed air brake system • Colour-coded pipework for easier servicing • Spring-actuated parking brake • Duomatic coupling • EBS (Electronic Braking System) with EBS socket at front, without connection cable Note: This trailer must only be towed by tractors that ensure the effectiveness of the ABS! • With lift and lower valve Vehicle stability system: • AAC Basic, automatic lift axle on the last axle acts as a maneuvering aid, up to 20 km/h, can be deactivated manually • Axle load detection via EBS Canbus signal Wheels and tyres: • 385/55 R22.5", manufacturer at supplier's discretion Electrics: • 24 Volt, multi-chamber rear lights, side yellow LED lighting • Side yellow LED lights linked to indicators (flashing side marker lights) • 2 white front position lights • 2 white/red lane marker lights at rear • 2x 7-pin and 1x 15-pin interchangeable sockets at the front, without connection cable SB Hydraulics: • Hydraulic cylinder with sliding device fitted in the floor. 2-circuit hydraulic system. • Forward/reverse switching is electric via cable remote control. • Operation hydraulically via truck PTO • Hydraulic connection with hose at front wall and HDK screw-in plug Recommended pump performance: • Flow rate: 110 ltr/min • Pressure: 250 bar • Oil reservoir minimum: 100 ltr Floor: 8 mm aluminium floor planks, grooved design Aluminium box-type body made of high-grade, wear-resistant material. Front and side walls from aluminium hollow profiles, all-round upper edge with welded-on wide special reinforcement profile. Sliding wall for improved load discharge, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminium hollow profiles, double-leaf door with 50/50 split, all-round special U-profile frame with stop and rubber gasket, equipped with 2 external locking rod mechanisms, locked top and bottom. Rear wall with mechanical safety lock, operated from the left-hand side (direction of travel). With pivoting upper crossbar. Standing platform with ladder access from both sides 3 removable, pivoting cross bars for tarpaulin support Roll tarp, one-sided opening, with 2 longitudinal tensioning straps, 3 ratchet tensioning straps on the side Operating instructions: Special permit required if overall length exceeds 16,500 mm. Registration/Country plates: • Germany • With Dekra inspection and report (in accordance with §13 EC-FGV) • Warning sign "Long vehicle" • Long vehicle/trailer combination certificate • Driver briefing at the Triptis factory for up to 4 people per truck combination Paintwork: • Frame: DB 7350 Novagrau • Body: Natural aluminium • Roll tarp: RAL 7035 light grey

Koşul: ikinci el, azami yük ağırlığı: 30.290 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2021, yükleme alanı uzunluğu: 13.460 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.755 mm, yükleme alanı hacmi: 92 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Donanım: ABS, Sürgülü taban +/- 92 m³, arka çift kanatlı kapı ve çubuk mandallı kilit, üstyapı önünde tırmanma ve durma platformu, branda, 21 tahta 10 mm olan "Cargo Floor" döşeme, tam boşaltma (hareketli ön duvar), itmeli-çekmeli fonksiyon, yükleme manometresi, katlanabilir arka lamba koruması, kablolu uzaktan kumanda, ABS, EBS, SAF INTRA aks/akslar, disk fren sistemi, kaldırma ve alçaltma özellikli havalı süspansiyon, kaldırılabilir aks, destek ayakları, 1x takım sandığı, yedek lastik tutucu, araç reklamla kaplanmış ve/veya yazılı olabilir. SI84502 Bdedpfx Ajwfvqvjh Njc Teklifimiz genel olarak yeni TÜV muayenesi olmadan sunulmaktadır. Yeni TÜV muayenesi istenirse iş ortaklarımızdan teklif sunabiliriz! Araç reklamla kaplanmış ve/veya yazılı olabilir. Genel teslimat ve ödeme şartlarımız geçerlidir. Bu ürün için finansman veya leasing teklifi hazırlamaktan memnuniyet duyarız. Lütfen bizimle iletişime geçin!

Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902027826, boş ağırlık: 6.590 kg, azami yük ağırlığı: 28.410 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 02/2021, bir sonraki muayene (TÜV): 02/2027, yükleme alanı uzunluğu: 15.020 mm, yükleme alanı genişliği: 2.490 mm, yükleme alanı yüksekliği: 2.810 mm, toplam uzunluk: 15.100 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5, lastik durumu: 60 yüzde, renk: kırmızı, römork freni: frenli römork, Üretim yılı: 2021, Donanım: ABS, For sale is a FLIEGL SDS 390 X-TRA LONG curtainsider trailer. The trailer is equipped with a large and a small pallet storage box, Alcoa aluminum rims, work lights, fire extinguisher boxes, and an air pipe system for roof de-icing. The trailer is in excellent technical and visual condition. The vehicle has low mileage and is in very good condition! Specifications: - First registration: 01.02.2021 - VIN: WFDFLT33902027826 - Main inspection (HU): 02/2027 - Safety inspection (SP): 08/2026 - 1st axle tires: 385/65R22.5, tread depth approx. 60%, suspension: air - 2nd axle tires: 385/65R22.5, tread depth approx. 60%, suspension: air - 3rd axle tires: 385/65R22.5, tread depth approx. 60%, suspension: air - Frame galvanized and painted - Portal doors - Alcoa Dura-Bright aluminum rims - AIR PIPE to prevent ice formation - Work lights - Mud flaps - Pallet storage boxes - Fire extinguisher box - Load securing tarpaulin Bdodpsyqxkhjfx Ah Njc Offer is subject to change; input errors, changes, mistakes, as well as prior sale reserved. Financing available on request. We are happy to organize customs clearance for you as well. Opening hours: Mon.-Fri. 8:00–16:00 or by appointment Price is NET / negotiable basis. An invoice with indicated VAT will be issued upon sale. Vehicle location: Im Gewerbepark 11 99441 Umpferstedt

Koşul: ikinci el, azami yük ağırlığı: 31.620 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2016, Platform B = 12.000 mm Yükleme uzunluğu: 13.500 mm, yükleme genişliği: 2.480 mm Yükleme yüksekliği: 1.200 mm Bodpfx Ahjx I U E Do Nsdc SAF akslar Son aks yönlendirilebilir (art aks) Havalı süspansiyon Kaldırılabilir aks Genişletme levhaları Enine şeritli yük direkleri Şaside direk cepleri Konteyner kilitleri 2x 20 ve 40 ft

Koşul: yeni, makine/araç numarası: eca976917d325d4adc41b69e8, boş ağırlık: 7.200 kg, azami yük ağırlığı: 27.800 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r 22,5, Further information Chassis semi-trailer for freight forwarding High-strength fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2-inch kingpin, main frame reinforcement for 25 t at the center of gravity over 3 m loading length when retracted. 13 pairs of hooks for lashing strap attachment welded to the crossmembers 23 pairs of lashing rings recessed into the outer frame, each rated for 3.5 t Outer frame with load-lock profile for lashing strap attachment Note! Not usable with side walls! 24 t 2-speed landing gear in reinforced version for unhitching while loaded, single-sided operation, with semi-circular lower section and straight mounting plate, with thrust compensation Wheel chocks with holders Aluminum side underrun protection Rear underrun protection Half-shell mudguards With anti-spray mud flaps in accordance with EU regulations 1 spare wheel carrier for 1 spare wheel, with wheel fastening kit 1 stake storage box, closed at the sides, open at the top, below the loading area, doors on both sides, W=450 mm/H=400/420 mm/D=2460 mm 6 pairs of extendable stake pockets for square tube stanchions 80x80 mm, extendable from loading width 2000 mm to 3100 mm 4 pairs of stake pockets recessed in the outer frame for square tube stanchions 80x80 mm 11 stake pockets centrally recessed in the floor for square tube stanchions 80x80 mm, with reinforcement beams, installed between the outer stake pockets 5 x 3 pairs of stake pockets on the outer longitudinal beams for square tube stanchions 80x80 mm, including reinforcement beams – for load securing to the front and rear during transport of reinforcing steel mesh, 2x5000 mm or 2x6000 mm 6 lightweight plug-in stanchions W=80/D=80 mm, usable height approx. 1850 mm, hot-dip galvanized, top with cable guides for strap tensioning 12 lightweight plug-in stanchions W=80/D=80 mm, usable height approx. 1850 mm, hot-dip galvanized with lashing rings welded to both sides at the bottom Note: Stake pockets/plug-in stanchions are not designed for sole securement of long materials, pipes, etc. without additional lashing 2 plastic tool boxes, with drawer and shelf, W=650/H=520/D=670 mm, lockable with a padlock (lock not included) 6 reinforcing steel winches with wire cable and counter hook, with cable feed-through in the outer frame, 1 removable plug-in gearbox for reinforcing steel winches supplied loose (without frame mounting) Telescoping Bdjdpfsi Ri Szox Ah Njc Main frame telescopic, extendable by max. 4000 mm and lockable at approx. every 500 mm Locking with pneumatic bolt locking + frame locking indicator on both sides, operation via manual button, control for brake/locking and suspension on driver’s side, ahead of the axles Storage compartment between longitudinal beams when extended Axles & Suspension SAF disc brake axles with 430 mm disc diameter Rear axle is self-steering, with automatic reverse lock via reversing light, with additional lock function on the trailer via hand button, and manual override in the tractor unit (pin 10), no truck installation required. Offset axle spacing mm Air suspension 1st axle with automatic lift, also electrically controllable from the truck, with starting aid, no truck installation required (starting aid functional up to 30% axle overload and max. speed of 25 km/h) Brake System 2-line compressed air brake system Color-coded line routing for easy servicing Spring-actuated parking brake 2 error-proof coupling heads at the front, without connectio

Koşul: yeni, makine/araç numarası: 068983c41e44eb5660fa9100c, boş ağırlık: 6 kg, azami yük ağırlığı: 28 kg, toplam ağırlık: 35 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 435/50 r19,5, Further Information Chassis Semi Logistics Fine-grained steel welded construction with preload slight pre-tension in the neck area, fifth wheel plate with replaceable 2" kingpin X-tra Long, with 15,030 mm internal length Slightly sloped new outer frame version with load-lock profile for attaching lashing straps 24 t 2-speed landing gear, single-side operation, with straight lower part, without compensating foot Note: Free support leg corner dimension or clear rear swing radius approx. 1,930 mm Pull-out ladder at the rear Side door holders 2 wheel chocks with bracket Side underrun protection aluminium Rear underrun protection galvanized steel Quarter mudguards in front of first axle and behind each axle Rear impact protection Axles + Suspension SAF disc brake axles Axle/chassis laser measured to reduce tire wear and fuel consumption Air suspension Brake System 2-line compressed air brake system Color-coded line arrangement for easy service. Spring-loaded parking brake 2 foolproof coupling heads at front, without connection line EBS, Electronic Braking System with EBS socket at front, without connecting cable Attention: The trailer may only be towed by tractor vehicles that ensure the effectiveness of the ABS! with lift & lowering valve Vehicle - Driving Stability System AAC Basic, automatic axle lift on the last axle as a maneuvering aid, active up to 20 km/h, can be deactivated manually Axle load detection via EBS canbus signal, for display on the in-cab monitor, truck must be correspondingly equipped, no installation (not a calibrated scale) Wheels and Tires 435/50 R19.5, brand as selected by manufacturer Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED side marker lights Yellow LED side marker lights with flashing function, connected with indicator 2 white position lights at the front 2 white/red lane control lights at the rear 2 x 7-pin foolproof sockets at front, without connection cable Floor Antislip phenolic plywood floor approx. 30 mm thick, on long longitudinal beams for high point load capacity for fork-lift axle load up to max. 7,100 kg Front wall / front corner stanchions 2,580 mm high, steel corner stanchions, volume construction, release mechanism for side curtain at front wall, crash blocker, inner lower section with steel bumper at approx. 140 mm height Middle stanchions 3 pairs of sliding stanchions, fully adjustable lengthwise, with four insertion pockets and long pocket below. 3 pairs of stanchion positions Insert slats 5 rows of wooden insert slats Rear wall / rear corner stanchions Rear steel corner stanchions up to lower edge of roof, hooks for curtain with round tube and tension ratchet Double-wing rear portal doors with 2 internal locking rods each Tarpaulin Tarpaulin with welded horizontal and vertical straps Tension locks made of stainless steel Roof Sliding roof, rear end-lift foldable, roof slides from rear to front, L-roof beam for automotive industry, internal width between roof beams approx. 2,490 mm, tarpaulin color: white Non-elastic roof, minimal roof beam sag during loading and unloading EcoLift - lifting roof can be raised approx. 380 mm on both sides, with gas pressure strut support, 3 ride heights at front: Internal height at front approx. 2,900 mm / 2,950 mm / 3,000 mm, adjusted to approx. 3,000 mm Optimized rain gutter at rear, at upper end cross member, above doors Bdedpfx Ahei Riwus Nsc Operating Notes Special permit required if overall train length exceeds 16,500 mm. When arrangi

Koşul: yeni, makine/araç numarası: f80f2330e1318ef03bc20755e, boş ağırlık: 3.200 kg, azami yük ağırlığı: 35.800 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further information Fine-grained steel welded construction in lightweight design, fifth-wheel plate with replaceable 2" kingpin, only 2 longitudinal members as double-T-beams for subsequent mounting of a headboard rack at the front in the new/current design, outer frame slightly angled with load-lock profile for lashing strap attachment. Note! In order to attach straps in conjunction with drop sides, the sides must be opened! 24 t, 2-speed landing gear with single-sided operation, straight base, without slide compensation, wheel chocks with holders, foldable aluminium side underrun protection, extendable galvanized steel rear underrun protection, half-shell mudguards - loose, not installed!, with anti-spray flaps behind each axle, 1 plastic water tank, capacity approx. 30 l, installed on the left (direction of travel). Bodpfsi Riwqsx Ah Nedc BPW disc brake axles with 430 mm disc diameter, axles/chassis laser aligned to reduce tyre wear and fuel consumption, air suspension, first axle with automatic lift axle, additionally manually lowerable, operable via push button on the vehicle. 2-line air brake system, with 1 standard central air reservoir, spring-loaded parking brake, 2 interlock-safe coupling heads at the front, without connecting line, EBS (Electronic Braking System) with EBS socket at the front, without connection cable, EBS 2S/2M, test connection for brake cylinder pressure leading outside on the EBS module. Attention: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! With lifting and lowering valve, control unit + brakes integrated in the frame as with tipper semi-trailers, mounted in front of the axles. Brake lining wear indicator on disc brakes via ABS/EBS lamp on the truck. 385/65 R22.5 Continental make, steel rims, factory silver. 24-volt multi-chamber lights, side-mounted yellow LED lighting as on tipper semi-trailers, 3,000 mm width must be observed, 2 front white position lights in LED, loose, 2 white/red lane marker lights at the rear, 2 x 7-pin interlock-safe sockets at the front, without connecting cable. Germany, approval to EC 2007/46 for complete vehicle, 24/7 service hotline, prepared for double one-line license plate holder: 1 x plastic and 1 x stainless steel interchangeable holder. Warning panel according to ECE-70, aluminium, loose, EBS, safe parking, without contour marking / reflective tape according to ECE R 048. Frame: DB 7350 Nova Grey, Landing legs: black coated. Immediately available!

Koşul: yeni, makine/araç numarası: d9c951d746f03c05bc5470f89, boş ağırlık: 5 kg, azami yük ağırlığı: 29.045 kg, toplam ağırlık: 35 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further Information Chassis Semi-Trailer Forwarding Fine-grain steel welded construction, fifth-wheel plate with interchangeable 2-inch kingpin Vario stanchion system 4 pairs recessed into the loading area, collapsible to 2,100 mm and extendable to approx. 3,500 mm for loading. Stanchions can be locked at 100 mm intervals for an internal width of 2,100 mm to 3,000 mm, 4 pairs of divisible stanchions 600 mm + 1,200 mm, total height 1,800 mm, removable. For an internal stanchion width above approx. 2,350 mm, oversize width. Vario bulkheads Floor prepared for the installation of 3 bulkheads. 4 x 5 pairs of Vario stanchion pockets for plug-in bulkheads (front and rear respectively), and 1 x 3 pairs each in the center for transporting welded mesh of 2 x 5,000 mm or 2 x 6,000 mm 2 Vario bulkheads, each consisting of 1 pair of plug-in stanchions and 1 crossbeam at the top approx. 2,200 mm wide. Crossbeam extendable by 220 mm on each side, with lashing hole for securing. Height of Vario bulkhead approx. 1,900 mm, adjustable to 1,300 mm or 700 mm. 4 stanchion pockets recessed in the center of the floor for 80 x 80 mm plug-in stanchions 1 pair of supports at the bottom for front Vario bulkhead 1 pair of supports at the bottom for rear Vario bulkhead Outer frame with slight incline, with Load-Lock profile for lashing strap hooks 14 additional pairs of lashing eyes recessed in the outer frame, 5 tons each 24 t, 2-speed landing gear, single-side operation, with straight lower section, without compensating device Pull-out ladder at rear Wheel chocks with holder Aluminum side underrun protection Galvanized steel rear underrun protection Quarter fenders in front of and behind the axle assembly With anti-spray mud flaps only on the last axle Rear impact guard 8 construction steel winches with wire rope and counter hooks, 4 left and 4 right, with wire rope routing through the outer frame, 1 removable plug-on transmission for construction steel winches – supplied loose (without frame mount) 1 spare wheel holder for 1 E-wheel, with wheel fastener set 1 plastic toolbox, with drawer and shelf, w=650 / h=520 / d=670 mm, can be locked with a padlock (lock not included) 1 stanchion storage box closed, open at the top, below the loading area, doors on both sides, w=450 mm / h=400/420 mm / d=2460 mm Bodpfx Aoi Ri R Deh Nsdc 4 lashing/stanchion rails set transversely in the floor across the full width to the outer frame (max. usable internal width between the outer plug-in stanchions approx. 2,170 mm), approx. 100 mm high. With 20 mm round steel bars, top and bottom, spaced approx. 60 mm apart (of the round steel). Bottom finishes with angle steel, half open downwards. For lashing and plugging in 80 x 80 mm stanchions. Note: Stanchion pockets/plug-in stanchions are not designed solely for securing long loads, pipes, etc. without lashing Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser aligned to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, activated by braking 3x (starting aid works up to 30% axle overload and up to a max speed of 25 km/h) Axle lift below the recommended driving height, therefore no warranty for tire damages Brake system 2-line compressed air brake system, color-coded line routing for easy service Spring-actuated parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at front, no c

Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902029406, boş ağırlık: 5.800 kg, azami yük ağırlığı: 29.200 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/2021, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.790 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5", renk: gümüş, Üretim yılı: 2021, The images are archive photos; the vehicle may still be in use! Bjdpfxewhp A De Ah Nsdc Chassis Semi-Trailer Spedition High-tensile steel welded construction in lightweight design, fifth wheel plate with replaceable 2-inch kingpin, coil well approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with phenolic plywood boards and steel cross members, 2 slit strip covers for the coil well, each approx. 293 mm wide, unladen weight approx. 13 kg per cover, outer frame slightly inclined with 'Load-Lock profile' for lashing strap attachment. Note: To attach the straps in combination with side walls, the side walls must be opened! 9 pairs of lashing eyes, each with a 5-ton capacity, recessed in the coil well area, 24-ton, 2-speed landing gear, single-sided operation, with straight base section, without compensating ram. Note: Free landing leg corner dimension or free pivoting radius to the rear approx. 1,930 mm, without landing gear, pull-out ladder at the rear, door retainers at the sides, 2 wheel chocks with holders, side underrun protection made of aluminum, bracket mounted transversely to the longitudinal beam and on the longitudinal beam for supporting aluminum planks, rear underrun protection aluminum, half-shell mudguards, fitted with anti-spray mudflaps according to EU, rear bumper, 1 plastic toolbox, 2 pairs of stanchion sockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, positions 1 and 2 according to Fliegl stanchion data sheet (old version), as with AU 19219. 2 stanchion sockets centrally recessed into the floor, approx. 72 x 42 mm internal dimensions, positions 1 and 2 according to Fliegl stanchion data sheet (old version), as with AU 192198. Note: Stanchion sockets/inserting stanchions are not designed for sole load securing of long material, pipes, etc. without lashing. Axles & suspension SAF disc brake axles with 430 mm disc diameter, 'axle/chassis laser alignment' reduces tire wear and fuel consumption, axle spacing offset 1,410/1,310 mm (combined transport) up to 44-ton total train weight, air suspension, no lift axle. Please note: The images are archive photos, the vehicle may still be in use!

Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33901014232, boş ağırlık: 5.900 kg, azami yük ağırlığı: 29.100 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2025, bir sonraki muayene (TÜV): 07/2026, yükleme alanı uzunluğu: 13.800 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 2.638 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5, renk: diğer, Üretim yılı: 2025, Chassis Semi Low-loader for Haulage Fine-grain steel welded construction, fifth wheel plate with interchangeable 2" kingpin Drive-over and loadable with construction/agricultural machinery up to max. 24,000 kg gross weight and up to a maximum machine width of 2,480 mm (the track width of the machine/vehicle to be transported must not exceed 2,200 mm), with latching bar for aluminium ramps at the rear (wider construction/agricultural machines may not be loaded) Outer frame, slightly sloped new design with "Load-Lock profile" for lashing strap attachment 14 pairs of recessed lashing rings in the outer frame, each rated at 2.5 t 6 pairs of recessed lashing rings in the outer frame, each rated at 5 t 24 t, 2-speed landing gear, single-side operation, straight base, without load equalisation Clear landing gear foot dimension or free swing radius towards rear approx. 1,920 mm Rear folding support 2x wheel chocks with holder Side protection in aluminium Underrun protection steel Quarter shell mudguards in front of and behind each axle With anti-spray flaps behind each axle 1x spare wheel holder for 1 emergency wheel, incl. wheel fixing kit 1x spare wheel, same manufacturer and design as main tyres, steel rim Axles & Suspension SAF drum brake axles "Axles/chassis laser measured" - reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, additionally electrically operated from truck, including forced lowering & starting aid, without truck installation (starting aid functional up to axle overload of 30% and up to max. 25 km/h) Brake System 2-line compressed air brake system Colour-coded line routing for easy service. Spring-loaded parking brake 2 non-interchangeable coupling heads at front, without interconnection pipe 24 Volt EBS, electronic braking system with EBS socket at the front, without connection cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! With raise & lower valve Bdjdpfxsxb D Swe Ah Noc Vehicle stability system "TPMS" Tyre Pressure Monitoring System according to ECE R 141, displayed via the truck's display, via EBS, without truck installation (precondition must be met in the truck. Only for main tyres) Wheels and Tyres 12x 235/75 R17.5 Twin tyres 12x steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting synchronised with indicator "Flashing side marker lights" 2 white LED position lamps at the front 2 white/red track marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connection cable Floor Birch plywood approx. 30 mm, high point load capacity for forklift axle load up to max. 5,600 kg Front bulkhead / front corner posts 25 mm aluminium hollow profile, 1,350 mm high, steel corner posts in volume design Front bulkhead inside additionally plated with 1,250 mm high birch plywood

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902029968, boş ağırlık: 6.100 kg, azami yük ağırlığı: 28.900 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2022, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 3.000 mm, süspansiyon: hava, lastik boyutu: 435/50 R19,5", The images are archive photos; the vehicle may still be in use! Specifications available upon request! Bdodpfewk Dckex Ah Nec

Koşul: ikinci el, azami yük ağırlığı: 30.670 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2019, yükleme alanı uzunluğu: 13.850 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.860 mm, yükleme alanı hacmi: 93 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Donanım: ABS, Hareketli zemin +/- 92 metreküp, arkada ispanyolet kilitli çift kanatlı kapı, gövde ön kısmında erişim ve ayakta durma alanı, katlanır branda, 21 panelli "Cargo Floor" zemin 10 mm, paslanmaz çelik aşınma Arkada hareketli zeminin altında plaka, her iki tarafta 12 bağlama halkası, tamamen boşaltma (hareketli ön duvar), dışarı itme fonksiyonu, yükleme manometresi, katlama. Arka ışık koruması, kablolu uzaktan kumanda, ABS, EBS, BPW Eco Plus aks(lar), disk fren sistemi, destek vinçleri, 1x saklama kutusu, araç kapatılabilir ve/veya reklamla etiketlenebilir Teklifimiz genellikle yeni bir TÜV onayı gerektirmez. Yeni bir TÜV onayı isteniyorsa, partner atölyelerimizden size teklif vermekten mutluluk duyarız! Araç reklamla kaplanabilir ve/veya etiketlenebilir. Genel teslimat ve ödeme koşullarımız geçerlidir. Bu mülk için size bir finansman veya kiralama teklifi sunmaktan mutluluk duyarız. Bdsdpfx Ahouf Iruj Noc Lütfen bizimle iletişime geçin!

Koşul: ikinci el, azami yük ağırlığı: 33.500 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2018, bir sonraki muayene (TÜV): 02/2026, Donanım: ABS, Fliegl SDS 390 brandalı dorse, BPW akslar, havalı süspansiyon, seviye ayarı, kaldırılabilir dingil, EBS, ABS Bdedpfx Ahox A Rkps Nec Muayene 02/26'ya kadar Dorse kazalıdır. Tamamen çalışır durumda. Brandası hasarlı.

Koşul: ikinci el, azami yük ağırlığı: 27.290 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2020, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.853 mm, Donanım: ABS, SDS390 101m³ X-TRA Long Walking Floor, Lift Axle, SAF* German Semitrailer * 101m³ X-TRA Long model * SAF axles * Lift axle * Disc brakes * Floor: Walking floor with rear wear plate made of V2A stainless steel sheet, aluminum floorboards, 8 mm floor profile, ribbed design, end caps in aluminum * Tires: 385/55 R 22.5, 1st axle 9/9 mm, 2nd axle 12/10 mm, 3rd axle 11/9 mm * Empty weight: 7,710 kg * Gross permissible weight: 35,000 kg * Payload: 27,290 kg * Air suspension * All information without guarantee * Further information and specifications on request. Additional Services: * Repainting and retrofitting possible * Short-term or customs license plates available * Transfer and shipping possible * Assistance with customs and export documentation * Procurement of COC and EUR documents * On the market since 1991 Bdsdpfxorwvl To Ah Nsc * Leasing and financing available. We have been working with various leasing companies for many years and can therefore find the optimal financing for every customer. We can also often assist customers with weak credit ratings and connect them with reputable leasing partners. * Own workshop * Mówimy po polsku. * We speak English. * Говорим по-русски. Repainting in your desired color is possible at our company at a reasonable price and in good quality. Are you located further away and have no opportunity or time to visit and inspect a truck in person? No problem—you are welcome to commission an independent expert of your choice to inspect the truck technically and visually. Should any deficiency arise contrary to expectations, we can rectify it quickly and efficiently in our workshop. Additionally, for an extra charge, we can deliver your new used vehicle Europe-wide.

Koşul: ikinci el, azami yük ağırlığı: 32.700 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2022, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.480 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 39.000 kg Boş ağırlık: 6.300 kg Taşıma kapasitesi: 32.700 kg Toplam uzunluk: 13.850 mm Yükleme uzunluğu: 13.650 mm Genişlik: 2.550 mm Yükseklik (yükleme): yaklaşık 1.100 mm Diğer bilgiler: - İç yükseklik yaklaşık 2.600 mm - İç uzunluk yaklaşık 13.650 mm - İç genişlik yaklaşık 2.480 mm - Lastik ölçüsü 385/65R22,5 - SAF akslar Bjdoywq E Sspfx Ah Nedc - Alt koruma (underrun koruma) - Forklift giriş yuvası arka - Havalı süspansiyon - Son aks yönlendirmeli - "Blitz" sürgülü üst tente - Sürgü halkaları - Takma çıtalar