Kullanılmış Fliegl Dts 300 Mit Radmulden satın al (11.624)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS 300 mit Radmulden
Çağrı
Koşul: yeni, makine/araç numarası: 195f80ad09517628522e33a91, boş ağırlık: 7.300 kg, azami yük ağırlığı: 16.700 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Chassis low-loader trailer
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Foldable rear support
2 wheel chocks with holder
Aluminum side underrun protection
Full-width rear mudflap
Quarter-shell mudguards in front of the 1st axle
1st pair of wheel recesses embedded in the deep bed lane area after the step, sloped for entry, approx. 1600 mm long at the bottom, approx. 400 mm deep. Note: The frame in the main beam area is 400 mm higher than the wheel recess.
2nd pair of wheel recesses embedded between the axles in the deep bed lane area, sloped for entry, approx. 600 mm long at the bottom, approx. 300 mm deep. Note: The frame in the main beam area is 300 mm higher than the wheel recess.
Extensions telescopic to 3,000 mm (not at rear taper)
(The track width of the construction machines or vehicles to be transported, however, must not exceed the external frame width of 2,550 mm)
Extensions telescopic to 3,000 mm, also in the wheel recesses at the bottom, foldable at the wheel recess extensions (widening not at the rear taper)
(The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm)
Wooden planks 70 mm for widening to 3000 mm
Lashing eyes low-loader
1 pair of lashing cutouts in the front longitudinal beam, recessed in the area of the step, each rated for 10 t
Bwsdsi Ri Rvjpfx Ah Sol
4 pairs of lashing holes in the external frame, each rated for 5 t (for attachment of lashing straps)
7 pairs of lashing mushrooms recessed at the top and side in the external frame, each rated for 10 t
1 x front in the step
6 x in the deep bed
First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm
Drawgear - Turntable trailer drawbar
Drawbar with tested 40 mm drawbar eye
Axles + Suspension
SAF drum braked axles
Axles/chassis laser-aligned to reduce tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber mountings
Wheels and tyres
235/75 R 17.5
manufacturer's choice
Steel rims in twin arrangement, factory silver
Brake system
2-line air brake system
Spring-loaded parking brake
2 foolproof coupling heads at the front with connecting lines to the tractor unit, ABS and ALB, with ABS connector at the front, including interconnecting cable. Attention: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS!
Electrics
24 volt, multi-chamber lights, yellow side LED lighting, 2 white position lights in front
2 white/red lane marker lights at rear
2 x 7-pin foolproof plugs at front with connecting cable
1 LED beacon with holder, switched via parking light (removable beacon)
2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm
Floor
Front step with steel/chequer plate covering
Storage box recessed in the approach slope to the step, followed by 70 mm softwood floor, in the wheel housing area with steel/chequer plate covering
Rear slope with 70 mm softwood floor
Low-loader area including rear slope 6500 mm
Loading ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
with wooden covering
with spring-assist lifting
Operating notes
For an axle load of 10,000 kg, a special permit is required; only indivisible loads permitted!!!
The total weight stated is technically feasible; depending on the cargo, the total weight may not be achieved while observing the permissible axle, load and fifth wheel loads. (Poor d
Küçük ilan
Gralla
1.820 km
Alçak şasi römork
Fliegl3achs Tieflader Anhänger DTS-S 300 mit Kröpfung
Çağrı
Koşul: yeni, boş ağırlık: 6.600 kg, azami yük ağırlığı: 17.400 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 6.500 mm, toplam uzunluk: 10.900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5 (Doppelbereifung), renk: gümüş, vites türü: mekanik, şehir içi yakıt tüketimi: 1.090 l/100 km, Unladen weight: 6,600 kg, permissible total weight: 24,000 kg, cargo area length: 6,500 mm. Tire size: 235/75 R17.5. 1st axle: , 2nd axle: , 3rd axle: , leaf suspension. 3-axle low-bed trailer with drop deck DTS-S 300 - Turntable with heavy-duty ball bearing slewing ring - Folding rear support - 1 spare wheel holder for 1 spare wheel, complete with mounting kit - 1 spare wheel, same make as the main tires, steel rim - 1 plastic toolbox - Extendable width to 3,000 mm (not available at rear incline) - Storage compartment for wooden planks in the center of the low-bed floor - 70 mm wooden planks for widening to 3,000 mm Tie-down points for low-bed: - with spring-assisted lifting support Axles + suspension: - SAF - Drum brake axles - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Braking system: - 2-line compressed air braking system - Spring-loaded parking brake Electrical system: - 24 Volt, multi-chamber lights, side-mounted yellow LED lighting - 1 LED beacon with bracket, switched via parking lights (removable beacon) - 2 pairs of warning plates, double LED lit and extendable to 3,000 mm Floor: - Storage box embedded in the drive-over slope to the drop deck - followed by 70 mm softwood floor, wheel arch area with steel/tread plate cover - Rear slope covered with 70 mm softwood floor Loading ramps: Steel ramps, 2,800 mm long, 750 mm wide, sideways adjustable, with wooden covering - 1 pair of ring lashing eyes set into the front of the drop deck, 10 t - 4 pairs of lashing holes at the rear with 5 t each for attaching tension belts - 7 pairs of lashing mushrooms recessed in upper and side outer frame, 10 t each - 1x front on the drop deck, 6x in the lower bed - 5 pairs of stake pockets recessed in outer frame, internal dimensions 70x40 mm (convertible to 5 t ring lashing eyes at extra charge) - 2 additional pairs of folding lashing eyes, 10 t each, 1x front on the drop deck, 1x behind 3rd axle. Axles + suspension: - SAF - Drum brake axles - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization
Bsdpfx Ahjtcwkrs Sjwl
Küçük ilan
Gralla
1.820 km
Alçak şasi römork
Fliegl3achs Tieflader Anhänger DTS-S 300 mit Kröpfun7
Çağrı
Koşul: yeni, boş ağırlık: 6.650 kg, azami yük ağırlığı: 17.350 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, toplam uzunluk: 10.900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5 (Doppelbereifung), renk: gümüş, vites türü: mekanik, şehir içi yakıt tüketimi: 1.090 l/100 km, Unladen weight: 6,650 kg, permissible total weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, - steel welded construction - turntable with heavy-duty ball-bearing slewing ring - foldable rear support - 1 spare wheel holder for 1 spare wheel, with wheel fastening kit - without spare wheel, - 1 plastic toolbox with shelf, dimensions 620mm x 360mm x 440mm (W/H/D), lockable with padlock - extendable side extensions up to 3,000 mm wide (not in the rear incline) - storage compartment for wooden planks underneath the low-bed area - 70 mm wooden planks for width extension to 3,000 mm - 1 pair of recessed ring lashing eyes at the front on the gooseneck, each rated at 5 t - 7 pairs of lashing mushroom anchors recessed at the top and side of the outer frame, each with a 10 t rating (1 x at the front on the gooseneck, 6 x in the low-bed area) - 5 pairs of stake pockets recessed in the outer frame, 70x40 mm internally - 2 additional pairs of folding lashing eyes, each rated at 10 t, 1x at the front on the gooseneck, 1x behind the 3rd axle - drawbar with 40 mm towing eye and 8° inclined towing eye - SAF drum brake axles - parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load equalization (rocker compensation) - 235/75 R17.5 - twin steel rims, factory silver - dual-line compressed air braking system - spring-loaded parking brake, ABS and ALB, with front connector, with connection cable - 24 volt, multi-chamber lights, side yellow LED lighting - 2 x 7-pin interlock-protected plugs at the front, with connection cable - 1 LED beacon with holder, switched via parking lights (removable beacon) - 2 pairs of warning panels with dual LED illumination, extendable to 3,000 mm - gooseneck front section with steel/chequer plate covering - storage box recessed into the transition incline to the gooseneck - thereafter with 70 mm softwood floor, in wheel arch area with steel/chequer plate covering - rear incline with 70 mm softwood floor - low-bed platform including rear incline: 6,500 mm - steel ramps: 2,800 mm long, 750 mm wide, laterally adjustable, surfaced with wood - additional ramp securing
Bwsdpeyxh Rzefx Ah Sol
Küçük ilan
Gralla
1.820 km
Alçak şasi römork
Fliegl3achs Tieflader Anhänger DTS-S 300 mit Kröpfung
Çağrı
Koşul: yeni, boş ağırlık: 6.600 kg, azami yük ağırlığı: 17.400 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, toplam uzunluk: 10.900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5 (Doppelbereifung), renk: gümüş, vites türü: mekanik, şehir içi yakıt tüketimi: 1.090 l/100 km, Unladen weight: 6,600 kg, permissible total weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, weights: Immediate registration technically possible
Total technically permissible weight: 24,000 kg / 30,000 kg
Payload approx.: 17,400 kg / 23,400 kg
Unladen weight approx.: 6,600 kg +/- build tolerance
Dimensions approx.:
Total length: 10,900 mm
Total width: 2,550 mm
Neck length: 2,180 mm
Low bed platform length incl. rear bevel: 6,500 mm
Rear bevel length: 950 mm
Chassis width: 2,520 mm
Loading height in loaded low bed: 860 mm
Drawbar height: 900 mm
Drawbar length: 1,900 mm
Features:
- Extendable outriggers to 3,000 mm (not in rear bevel) incl. wooden planks
- SAF drum brake axles
- Parabolic suspension
- Drawbar with certified 40 mm towing eye
Bedpox Nrp Nsfx Ah Sowl
- Tyres 235/75 R17.5
- Storage box integrated in transition slope to gooseneck
- 1 plastic toolbox with shelf, 620 x 360 x 440 mm (w/h/d)
- Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, timber lined
- Ramps with spring-assisted lifting
- Frame hot-dip galvanized
Subject to errors and modifications.
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS 300 P mit Radmulde
Çağrı
Koşul: yeni, makine/araç numarası: ede0610378cbe39cc4883251d, boş ağırlık: 24.000 kg, azami yük ağırlığı: 7.550 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low Loader Trailer
Steel welded construction
1st pair of wheel recesses integrated into the steel platform in the driving aisle area, tapered for entry, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note!
The frame is 400 mm higher than the wheel recess in the main beam area.
If machines are to be transported and the total height needs to be checked, we kindly request the technical datasheet of the machine types with exact specifications (if total height is exceeded -> customer risk, approval required). Depending on ground clearance under the machines, inserts in the wheel recesses may be required by the customer.
Turntable with heavy-duty ball bearing slewing ring, toolbox integrated into the turntable front section
Rear support foldable
2 wheel chocks with holders
Side underrun protection in aluminium
Rear mudflaps across the full width
Extendable widening to 3,000 mm (not in rear bevel area)
(The track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550 mm)
Storage compartment for wooden planks in the centre of the loading area
70 mm wooden planks for widening to 3,000 mm
Lashing points for low loader
3 pairs of lashing points integrated into the front floor, each 10 t Incl.
6 pairs of lashing mushrooms recessed in the upper and side external frame, each 10 t
1 x in the gooseneck area
The rest distributed in between, distance not greater than 1200 mm
1 x rear bevel
5 pairs of stake pockets recessed into the external frame, inside 70 x 40 mm (convertible to 5 t ring lashing points, not included)
Drawbar for turntable trailer
Drawbar with certified 40 mm towing eye
Axles + Suspension
SAF drum brake axles
Axle/undercarriage laser measured for reduced tyre wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber mounting
Brake System
2-line compressed air brake system
Colour-coded piping for easy servicing
Spring-actuated parking brake
2 non-interchangeable coupling heads at the front with connecting lines to the truck
ABS and ALB, with ABS socket at the front, including connection cable
Attention: The trailer may only be towed by vehicles that ensure the effective operation of the ABS!
Wheels and Tyres
235 / 75 R 17.5
manufacturer's choice
Steel rims in twin arrangement, factory silver
Electrics
24 Volt, multi-chamber lights, side-mounted yellow LED lighting
Bwedpei Ri Ryofx Ah Sel
2 white front position lights
2 white/red rear marker lights
2 x 7-pin non-interchangeable plugs at the front, with connection cable
1 LED beacon with holder, switched via parking light (removable beacon)
2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm
Floor
Steel floor in the front section, incl.
followed by 70 mm softwood floor, wheel arch areas with steel/checkered plate covering
Rear bevel with 70 mm softwood floor
Low loader platform incl. rear bevel 8,200 mm
Ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
covered with wood
with spring lift assistance
Operating Instructions
With 10,000 kg axle load an exemption permit is required, only indivisible loads possible!!!
The total weight stated is technically feasible; depending on the cargo, the total weight may not be achievable within the permitted axle, support, and fifth wheel loads (Poor driving and trailing behaviour possible due to incorrect load distribution)
Country of Approval / Plates
Country of approval: Germany Incl.
with Dekra approval and certificate (acco
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
FlieglDTS 300 3 Achs Tiefladeranhänger
Çağrı
Koşul: ikinci el, boş ağırlık: 6.520 kg, azami yük ağırlığı: 23.480 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2019, yükleme alanı uzunluğu: 8.610 mm, süspansiyon: hava, lastik boyutu: 235/75R17,5 ---/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 ---/140J, arka lastik boyutu: 235/75R17,5 ---/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Loading platform length (low bed) approx. 6.50 m, total loading platform length approx. 8.60 m, loading height approx. 900 mm.
Vehicle is being offered on behalf of a bank.
-- Subject to typographical errors, mistakes, and modifications. Sample images --
More data at: !
More details: !
Bwsdpfoy Izthsx Ah Sjl
Küçük ilan
Wiesmoor
2.630 km
Alçak şasi römork
FLIEGLDTS 300 P 3-Achs Tieflader Plateau hydr. Rampen
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 17.700 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/1994, yükleme alanı uzunluğu: 9.400 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 950 mm, toplam genişlik: 2.480 mm, Toplam uzunluk: 11.850 mm
Yükleme uzunluğu: 9.400 mm (arka eğim dahil)
Genişlik: 2.480 mm
Yükleme yüksekliği: 950 mm
Diğer bilgiler
- 40 km/sa
- Hidrolik rampalar
Bwedpjy Hn Ebsfx Ah Sol
- Dış şaside sabitleme halkaları
- Geniş sabitleme paketi
- Payanda cepleri
- İkiz lastikler
Küçük ilan
Burghaun
2.380 km
Düşük yükleyici
FlieglDTS 300 Rampen BPW auf 3.000mm verbreiterbar
Çağrı
Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2018, Donanım: ABS, = Diğer seçenekler ve donanımlar =
- Arka havalı süspansiyon
- Ön havalı süspansiyon
= Notlar =
Araçla ilgili sorularınız için Bay Seidel (tel. numarası talep üzerine) size memnuniyetle yardımcı olur.
Fliegl DTS 300 Alçak Yükleyici
BPW akslar, kampanalı frenler, yay depolama, mekanik rampalar, izin verilen azami toplam ağırlık: 24.000 kg, boş ağırlık: 6.350 kg, taşıma kapasitesi: 17.650 kg, yükleme alanı ölçüleri: U 8.490 mm G 2.510 mm, lastik diş derinliği: 1. aks 7-12 mm, 2. aks 7-8 mm, 3. aks 4-7 mm
Talep üzerine size leasing veya finansman teklifi sunabiliriz.
Bodey Adc Ijpfx Ah Sswl
Bay Seidel (tel. numarası talep üzerine) size memnuniyetle yardımcı olur.
Daha fazla bilgiyi web sitemizde bulabilirsiniz.
... Hatalar, değişiklikler ve ara satış hakkı saklıdır!!!
= Diğer Bilgiler =
Boş ağırlık: 6.350 kg
Yük kapasitesi: 17.650 kg
Azami toplam ağırlık: 24.000 kg
Dış ölçüler: 0x2550x3500
Daha fazla bilgi için Tobias Ebert ile iletişime geçebilirsiniz.
Küçük ilan
Bovenden
2.411 km
Alçak şasi römork
FlieglDTS-S 300, verbreiterbar auf 3,05m
Çağrı
Koşul: yeni, boş ağırlık: 5.740 kg, azami yük ağırlığı: 24.260 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, renk: gümüş, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Araç konumu: Bovenden, döner tepe lambası, 3 aks, SAF akslar, döner tabla, yaprak süspansiyon, ABS (Anti Blokaj Sistemi), 3 m'ye kadar genişletilebilir, bağlama halkaları, 2 parçalı yükleme rampaları, mekanik rampalar, uzatılabilir çekme oku, yan alüminyum yan koruma, çift lastik, EBS
Yapı: Yükleme uzunluğu yaklaşık 8,5 m, 3,05 m'ye kadar genişletilebilir. Demo araç!
Parabolik süspansiyonlu ve arka aks dengelemeli, 3x 10t SAF aks, azami toplam ağırlık 30t olabilir, uzunluğu ayarlanabilir çekme oku.
Bwodpfx Ajxbttqoh Ssl
Stoktan, üretici adına güncel sicil kaydı ile yeni araç! AKSESUAR BİLGİSİ GARANTİSİZ, değişiklik, ara satış ve hata yapılabilir!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS 300 P
Çağrı
Koşul: yeni, makine/araç numarası: 2dff0c136c85096f36822a0bb, boş ağırlık: 7.150 kg, azami yük ağırlığı: 16.850 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low-bed Trailer
Steel welded construction
Turntable with heavy-duty ball-bearing slewing ring, tool box recessed into turntable front section
Foldable rear supports
2 wheel chocks with holders
Aluminum side underrun protection
Full-width rear spray flaps
Extendable widening sections up to 3,000 mm (not including rear taper)
(The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm)
Central storage compartment for timber boards on the loading platform
70 mm timber boards for widening up to 3,000 mm
Lashing eyes for low loader
3 pairs of 10 t lashing points integrated into the front floor
6 pairs of 10 t lashing mushrooms, recessed into the upper and side outer frame
1x in the neck area
The remainder are distributed in between, distance not greater than 1,200 mm
1x rear taper
5 pairs of stake pockets recessed in the outer frame, inside dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included)
Towing Device Trailer Turntable
Drawbar with certified 40 mm towing eye
Axles & Suspension
SAF drum brake axles
Axle/chassis laser alignment to reduce tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker compensation)
Brake System
2-line compressed air brake system
Colored line routing for easy servicing.
Spring-loaded parking brake included.
2 non-interchangeable coupling heads at the front, with connecting lines to tractor unit
ABS and ALB with ABS connector at the front, with connecting cable
Note: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS!
Wheels and Tires
235 / 75 R 17.5
Manufacturer's choice
Twin steel rims, factory silver
Electrics
24 Volt, multi-chamber tail lights, side yellow LED lighting
2 white position lights at the front
2 white/red lane marker lights at the rear
2x 7-pin non-interchangeable connectors at the front, with connecting cable
1 LED beacon with holder, operated via parking light (removable lamp)
2 pairs of warning signs, double LED illuminated and extendable to 3,000mm
Floor
Front area steel floor,
then 70 mm softwood floor, steel/chequer plate covering in the wheel arch area
Rear taper with 70 mm softwood floor
Low-bed area incl. rear taper: 8,200 mm
Loading Ramps
Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable
Bwsdpfx Ahei Riy Ej Sel
Timber deck included
With spring-assisted lifting
Operating Notes
At 10,000 kg axle load, an exemption certificate is required! Only indivisible loads permitted!
The total weight specified is technically feasible; depending on the cargo, the total weight may not be achievable due to permissible axle, support, and fifth wheel loads. (Poor driving and trailing performance possible due to incorrect load distribution)
Country of Registration / Plates
Country of registration: Germany
With Dekra inspection and certificate (in accordance with §13 EC-FGV)
24/7 service hotline
Prepared for two-line license plate holder
Contour marking with reflective strips as per ECE R 048, side white and rear red
Paint finish
Frame DB 7350 Nova grey
10-year corrosion warranty
Drawbar galvanized or black,
manufacturer’s choice
Steel loading ramps hot-dip galvanized
Please note: Archive images!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS S 300 Parab/Hydr.
Çağrı
Koşul: yeni, makine/araç numarası: d461243f559015adca5bb372c, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Chassis for Low-Loader Trailer
Steel welded construction
Turntable bogie with heavy-duty slewing ring
Foldable rear support
2 wheel chocks with holders
Side underrun protection, aluminium
Full-width rear spray flap
Half-shell fenders on 1st axle with anti-spray flaps
Additional anti-spray flaps behind 2nd and 3rd axle
1 plastic toolbox, with tray, width = 620 mm, height = 360 mm, depth = 440 mm, lockable with padlock
Extendable width up to 3,000 mm
Central storage compartment for wooden planks in the loading area
70 mm wooden planks for extension to 3,000 mm
Lashing rings for low-loader (40 securing points)
1 pair of lashing cutouts indented in the front longitudinal beam (cranked zone), each rated for 10 t
4 pairs of lashing holes in the outer frame, each rated for 5 t (for tensioning straps)
7 pairs of lashing pins recessed in the top and side of the outer frame, each rated for 10 t
1 x at the front on the cranked zone
6 x in the low-bed
First lashing ring 250 mm from front and last one max. 250 mm from rear; spacing between lashing rings not more than 1,100 mm
5 pairs of stake pockets recessed in the outer frame, inside dimensions 70 x 40 mm, convertible to 5 t ring lashing eyes
2 additional pairs of folding lashing rings, each rated for 10 t
1 x on the cranked zone (protruding)
1 x recessed in the floor behind the last axle
Drawbar / Turntable coupling
Drawbar with certified 40 mm towing eye
Axles & Suspension
Drum brake axles
Parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load equalization (rocker balance)
Wheels and Tyres
235 / 75 R 17.5
Manufacturer's choice
Steel rims, twin arrangement, factory silver
Brake System
2-line compressed air brake system
Spring-loaded parking brake
2 anti-swap coupling heads at the front, with connecting lines to the tractor unit
ABS and ALB, with ABS socket at the front, including connecting cable
Make: Wabco, Knorr or Haldex
Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
2 white position lights at the front
2 white/red lane marker lights at the rear
2 x 7-pin anti-swap plugs at the front, with connecting cable
1 LED beacon with bracket, switched via parking light (removable lamp)
2 pairs of double warning panels, LED illuminated and extendable to 3,000 mm
Floor
Bodpsi Ri Dljfx Ah Sswl
Front cranked section with steel / tread plate surface
Storage box recessed in the ramp transition to cranked section
Followed by 70 mm softwood floor, in wheel arch area with steel / tread plate surface
Rear bevel with 70 mm softwood floor
Low-loader area incl. rear bevel: 6,500 mm
Loading Ramps
Steel ramps, 2,800 mm length, 750 mm width, laterally adjustable
Wooden inlay
Hydraulically operated via tractor auxiliary drive with restrictor, operation on left side, FR
Hydraulic connection with SVK coupling NW 10/3, including connecting hose
Registration / Plates
Country of registration: Germany
24/7 Service Hotline
Prepared for two-line plate holder
Contour marking with reflective tape according to ECE R 048, white on sides and red at rear
Warning panel according to ECE - 70
Paintwork
Frame hot-dip galvanized including passivation
15-year warranty against rust-through
Drawbar galvanized or black, manufacturer’s choice
Ramps hot-dip galvanized
Note! These are archive images!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS S 300 Parab/Feder
Çağrı
Koşul: yeni, makine/araç numarası: 628cde0fe99cc2d3c8eaa8dd8, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Lowbed trailer chassis
Steel welded construction
Turntable with robust ball bearing ring
Foldable rear support
2 wheel chocks with holders
Aluminum side underrun protection
Full-width rear splash guards
Half-shell fenders on axle 1 with anti-spray mudflaps, anti-spray mudflaps behind axles 2 and 3
1 plastic toolbox with shelf insert, dimensions: 620 x 360 x 440 mm (W x H x D), lockable with a padlock (padlock not included)
Extendable widenings up to 3,000 mm
Storage compartment for timber planks in the center of the loading area
70 mm timber planks for extension to 3,000 mm
Lashing eyes for low loader (40 lashing points)
1 pair of lashing cutouts in the front longitudinal beam, recessed in the cranked area, each 10 t
4 pairs of lashing holes in the outer frame, each 5 t (for attaching lashing straps)
7 pairs of recessed lashing mushrooms on top and side of outer frame, each 10 t
1 front cranked area
6 in the lowbed deck
First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm
5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included)
2 pairs of additional folding lashing eyes, each 10 t
1 located in the cranked area (protruding)
1 recessed in the floor behind the last axle
Towing equipment for turntable trailer
Drawbar with certified 40 mm towing eye
Axles & Suspension
Drum brake axles (manufacturer’s choice)
Axle/chassis laser alignment to reduce tire wear and fuel consumption
Parabolic spring suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation)
Wheels and tires
235 / 75 R 17.5
(manufacturer’s choice)
Steel rims, dual configuration, factory silver
Braking system
2-line compressed air braking system
Spring-loaded parking brake
2 non-interchangeable coupling heads front, with connecting lines to the tractor unit,
ABS and ALB, with ABS plug front, with connection cable
Brand: Wabco or Knorr
Electric system
24 volt, multi-chamber lights, yellow LED side marker lights
Bjdpei Ri Ddsfx Ah Sswl
2 white front position lights
2 white/red lane marker lights rear
2 x 7-pin non-interchangeable plugs at front, with connecting cable
1 LED rotating beacon light with bracket, switched via parking light (removable lamp)
2 pairs of warning boards, double LED illuminated, extendable to 3,000 mm
Floor
Front crank area with steel / chequer plate covering
Toolbox recessed in the ramp bevel to the crank
Then 70 mm softwood floor, steel / chequer plate covering in wheel arch area
Rear ramp bevel with 70 mm softwood floor
Lowbed loading area incl. rear ramp bevel: 6,500 mm
Ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Timber-covered
With spring assist
Country of approval / Number plates
Country of registration: Germany
24/7 service hotline
Prepared for two-line license plate holder
Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear
Warning board according to ECE-70
Painting
Frame hot-dip galvanized incl. passivation
15-year warranty against corrosion
Drawbar galvanized or black, as per manufacturer’s choice
Loading ramps hot-dip galvanized
Attention! These are archive images!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS 300
Çağrı
Koşul: yeni, makine/araç numarası: f8fb99947a1c19bc4d63549ff, boş ağırlık: 6 kg, azami yük ağırlığı: 17 kg, toplam ağırlık: 24 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Chassis Low-bed Trailer
Steel welded construction
Turntable with heavy-duty ball bearing race
Foldable rear support
2 wheel chocks with holder
Side underrun protection made of aluminium
Bwjdpfx Ahoi Riwfo Ssl
Full-width rear spray flaps
Half-shell fenders on the 1st axle with anti-spray mudflaps; anti-spray mudflaps behind 2nd and 3rd axles
1 plastic tool box, with shelf, w=620/h=360/d=440 mm, lockable with padlock (padlock not included)
Extendable widening to 3,000 mm (not at the rear chamfer) (the track width of machines or vehicles to be transported must not exceed 2,550 mm outer frame width)
Central storage compartment for wooden beams on the loading area
70 mm wooden beams for widening to 3,000 mm
Lashing points on low loader
1 pair of recessed ring lashing eyes at the front on the gooseneck, each rated 5t
7 pairs of mushroom lashing points, recessed at top and side in outer frame, each rated 10t
1x at the front on the gooseneck
6x in the drop deck
First lashing point 250 mm from front, last max. 250 mm from rear, distance between lashing eyes not greater than 1,100 mm
5 pairs of stake pockets recessed in side frame, internal dimension 70 x 40 mm (convertible for 5t ring lashing eyes, not included)
2 pairs of additional fold-down lashing eyes, each rated 10t
1x on the gooseneck (projecting)
1x recessed in the floor behind the last axle
Trailer turntable drawgear
Drawbar with certified 40 mm towing eye
Axles & Suspension
SAF drum brake axles
Axle/chassis laser alignment to reduce tyre wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (equalising rocker)
Wheels and Tyres
235 / 75 R 17.5
Manufacturer's choice with M&S marking
Steel wheels in twin arrangement, factory silver
Brake System
2-line compressed air braking system
Spring-loaded parking brake
2 non-interchangeable coupling heads at front, with connection lines to the towing vehicle
ABS and ALB, with ABS connector at front, with connection cable
Brand: Wabco or Knorr
Note: This trailer may only be towed by vehicles which ensure the proper functioning of the ABS!
Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
2 white front position lights
2 white/red rear outline marker lights
2 x 7-pin non-interchangeable plugs at front, with connection cable
1 LED rotating beacon with holder, switched via parking lights (removable beacon)
2 pairs of warning panels, double LED illuminated and extendable to 3,000mm
Floor
Gooseneck at front with steel/chequer plate covering
Storage box recessed on the transition slope to gooseneck
After that, 70 mm softwood floor, steel/chequer plate covering in wheel arch area
Rear slope with 70 mm softwood floor
Low-bed platform including rear slope 6,500 mm
Loading ramps
Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable
Additional ramp safety support, foldable underneath (prevents lateral slipping of the ramps, not in conjunction with hydraulic side ramp shift)
Wooden inlay on ramps
Spring lifting assistance
Operating instructions
At 10,000 kg axle load, an exemption permit is required, only indivisible loads possible!!!
The stated total weight is technically possible; depending on the load, the gross weight may not be achievable while adhering to permissible axle, support, and kingpin loads. (Poor driving and trailing behaviour may result from incorrect load distribution)
Country of registration/Plates
Country of registration: Germany
Approval according t
Küçük ilan
Wiesmoor
2.630 km
Alçak şasi römork
FLIEGLVTS 400 Tieflader mit Radmulden Luft/ Hydr.
Çağrı
Koşul: yeni, azami yük ağırlığı: 30.310 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, NEW VEHICLE Fliegl 4-axle low loader with 2 pairs of wheel recesses and ramps
Total weight: 40,000 kg
Payload: 30,310 kg
Unladen weight: 9,690 kg
Overall length: 12,000 mm
Loading length: 10,000 mm
Load bed: 7,150 mm including 850 mm drive-up slope
Loading height: 900 mm
1st pair of wheel recesses after drop in the load bed, length at bottom approx. 1,600 mm, 400 mm deep
2nd pair of wheel recesses between the axles in the load bed, length at bottom 600 mm, 300 mm deep
Extensions to 3,000 mm, warning signs, beacon,
Bwjdpfx Ajnzlg Deh Sol
Comprehensive lashing package
5 pairs of stake pockets in the outer frame
Excavator boom recess 1,800 mm long, 150 mm deep
Drawbar 50 mm
Air suspension with lifting and lowering valve, can be operated separately
BPW drum brakes
Tyres: 235 / 75 R 17.5"
Axle load detection via EBS CAN bus signal, Trailer Info Center
Ramps 2,800 mm x 750 mm with hydraulic operation
Hydraulic lateral shifting
Hire-purchase offer: 48-month term, residual value 40%, down payment only VAT on the rental instalments, monthly instalment EUR 970.00 net
Vehicle available from 11/09/2023 from the Neumünster trade fair.
Visit us at Nordbau - Stand West 121, right next to the main entrance.
Other 3-, 4- and 5-axle low loaders new and used available immediately.
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglSDS 470 T mit Radmulden
Çağrı
Koşul: yeni, makine/araç numarası: dc46d2e1cd272305b99fb3160, boş ağırlık: 9.800 kg, azami yük ağırlığı: 31.200 kg, toplam ağırlık: 41.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Vehicle consists of:
Chassis: Low-bed semi-trailer
Steel welded construction, kingpin plate with replaceable 2-inch kingpin and two kingpin positions
24 t, 2-speed landing gear, operated from one side, with straight foot, without telescopic compensation
Foldable rear support
2 wheel chocks with holders
Side underrun protection made of aluminium
Quarter-circle mudguards in front of and behind axle modules
1st pair of wheel recesses sunken into the low-bed loading area behind the gooseneck, bevelled for entry. Length at base approx. 1,600 mm, depth of recesses approx. 260 mm. Note! The frame is 260 mm higher than the wheel recess in the main beam area.
2nd pair of wheel recesses between axles A and B. Length at base approx. 350 mm, depth approx. 260 mm. Note! The frame is 260 mm higher than the wheel recess in the main beam area.
If wheel loaders are to be transported and the total height needs to be checked, please provide the technical data sheet for the respective wheel loader types with precise dimensions (if total height is exceeded -> customer assumes risk, permit required); depending on ground clearance under the machines, inserts in the wheel recesses may be required on the customer's side.
Wheel recess covers pull-out from the main frame, with wooden inlays.
Extensions can be pulled out to 3,000 mm (not possible in rear slope area and not at the base of the wheel recesses) (track width of construction machines/vehicles to be transported must not exceed external frame width of 2,550 mm).
Storage compartment for wooden planks on gooseneck, transverse at the front
70 mm wooden planks for widening to 3,000 mm
Tie-down points on low-bed
2 pairs of ring lashing eyes, each 5 t, at the front on the gooseneck
11 pairs of lashing points (Zurrpilze) recessed into the top and side of external frame, each 10 t
- 2x on gooseneck
- 9x on low-bed deck (first eye 250 mm from the front, last max. 250 mm from the rear, distance between eyes not greater than 1,100 mm)
8 pairs of stanchion sockets recessed in the external frame, internal dimensions 70 x 40 mm, or alternatively 5 t ring lashing eyes recessed in the floor instead of sockets
Axles + Suspension
SAF drum braked axles
Axles/chassis laser-aligned to reduce tire wear and fuel consumption
Air suspension
Wheels and Tires
235 / 75 R 17.5
to manufacturer’s choice
Steel twin wheels, factory silver
Braking system
2-line air brake system
Spring-loaded parking brake
EBS, electronic braking system with EBS socket at front, no connection cable
Attention: The trailer may only be towed by tractors that ensure full ABS functionality!
2 non-interchangeable coupling heads at front, without connecting pipe
With lifting & lowering valve
Axle load detection via EBS CAN bus signal, for indication on the truck’s cab display – truck must be pre-equipped accordingly, not truck-installed (not certified as a weighing system)
Vehicle stability control system
Electrics
24 volts, multi-chamber lights, yellow LED side marker lights
2 white position lights at the front
2 white/red lane marker lights at rear
2 x 7-pin non-interchangeable sockets at front, without connection cable
1 x LED beacon with bracket, controlled via parking light (rotating beacon detachable)
2 pairs of warning boards, double-sided, LED illuminated and extendable to 3,000 mm, removable with plug
Bedpfx Aei Ri Hcsh Sowl
Floor
Gooseneck with steel/checker plate covering
Storage box integrated in inclined drive-over area to gooseneck
- Then 70 mm softwoo
Küçük ilan
Triptis
2.248 km
Diğer
FlieglSZS 260 Jumbo mit Radmulden und Tiefbett für LKW
Çağrı
Koşul: yeni, makine/araç numarası: 3c70e9a5d82cfb3ada79baf95, boş ağırlık: 8 kg, azami yük ağırlığı: 17 kg, toplam ağırlık: 26 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 205 / 65 r 17,5, Further Information
Chassis Semi-Trailer for Freight Forwarding
Fine-grain steel welded construction, kingpin plate with interchangeable 2-inch kingpin, rear bevel to approx. 1920 mm, continuous hook-in profile for ramps at the rear and front on the gooseneck, wear rollers at the rear, lowered deck from the kink to the axle assembly. Drawing approval required from the customer upon placing the order!
Bodpoi Ri Hrsfx Ah Sjwl
Pair of lashing mushrooms recessed on top and side of the outer frame, each 10 tons
Pair of lashing rings recessed in the outer frame on the gooseneck, each 5 tons
24 t 2-speed landing gear, single-sided operation, with straight lower section, without lateral compensation
Rear support foldable, mounted externally
Chocks with holder
Side underrun protection, aluminium
Underrun protection, steel, for EU standards, if technically feasible
Quarter-shell mudguards
with anti-spray mud flaps to EU standards
1 pair of wheel recesses in the lowbed section after the gooseneck, recessed in the driving lane area, inclined for easier entry. Bottom length approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses at rear bevel. Depth approx. 200 mm. Note! Frame in the main beam area is 200 mm higher than wheel recess. Detailed technical evaluation required after order placement.
Wheel recess covers extendable from the lowbed with hardwood inserts, on rear bevel with hardwood inserts.
Electrical winch, 24 Volt, pulling force 5500 kg, mounted at gooseneck kink, not extending onto the loading area, operated by remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide roller at the rear bevel.
Axles + Suspension
SAF or BPW drum brake axles at our discretion
Air suspension with raise & lower valve + auto reset function
Wheels and Tyres
205 / 65 R 17.5 tyres with 129/127K (132/132G) marking for 8 t tyre load capacity at max. 90 km/h
manufacturer’s choice
Steel rims in twin arrangement, factory silver
Braking System
2-line compressed air braking system
Spring-loaded parking brake
2 foolproof couplings at the front, without interconnecting line
EBS manufacturer: Haldex, electronic brake system with EBS socket at the front, without interconnecting cable (brake calculation sent to customer for approval, 15.07.2021)
Note: The trailer must only be towed by vehicles that ensure the effectiveness of the ABS!
Axle load detection via EBS CAN bus signal, for display via dashboard in the tractor unit, truck must be factory-prepared accordingly, not installed in truck (not a certified weighing system)
Electrics
24 Volt, multi-chamber lights, lateral yellow LED lighting
2 white position lights at the front
2 white/red lane marking lights at the rear
2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without interconnecting cable
Floor
Gooseneck with steel / checker plate covering
30 mm phenolic plywood floor, in the lowbed between the main beams, center
In the driving lane area, with serrated grating, in the wheel recesses with steel/checker plate covering.
Ramps
Pair of aluminium ramps, 3200 mm long, load capacity per pair 12,000 kg
Pair of steel ramps for access to the lowbed
Pair of steel ramps for crossing onto the gooseneck
Side Boards
Registration / Plates
Registration country: Germany
with Dekra inspection and certificate (according to §13 EC-Vehicle Approval Regulation)
Prepared for single-line number plate holder
Contour marking with reflective tape according to ECE R 048, yellow on sides
Küçük ilan
Wiesmoor
2.630 km
Alçak şasi römork
FLIEGL3 Achsen Tieflader DTS 300, hydraulische Rampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 23.920 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, YENİ ARAÇ Fliegl 3 dingilli alçak şasi treyler Tip DTS 300, sıcak daldırma galvanizli
Toplam ağırlık 24.000 kg / 30.000 kg
Yük kapasitesi 17.920 kg / 23.920 kg
Boş ağırlık 6.080 kg
Toplam uzunluk 10.900 mm
Yükleme uzunluğu 8.680 mm
Yatak alanı 6.500 mm, 900 mm yaklaşım rampası dahil
Parabolik süspansiyon
2.800 mm uzunluğunda rampalar, hidrolik kumandalı
3.000 mm'ye kadar genişletilebilir, uyarı levhaları ve döner flaşörle birlikte
Bwodpfx Aexb Nmysh Sol
5,0 ve 10,0 tonluk sabitleme noktalarıyla büyük bağlama paketi
5 çift kazık cebi
40 mm çekme halkası
Ek olarak nakliye/hazırlama, Wiesmoor stok yerinden 1.280,00 €/net
Kiralama teklifi: Vade 48 ay, kalan değer %40, ön ödeme sadece KDV.
Aylık taksit: 500,00 EUR
Küçük ilan
Wiesmoor
2.630 km
Alçak şasi römork
FLIEGLDTS 300 3-Achs Tiefl 6,5m Parab Hydraulik
Çağrı
Koşul: yeni, azami yük ağırlığı: 17.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.670 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, From ongoing production
Total weight: 24,000kg / 30,000kg
Unladen weight: 6,100kg
Payload: 17,900kg / 23,900kg
Overall length: 10,890mm
Loading length: 8,670mm total, 2,520mm gooseneck, 6,500mm loading bed
Width: 2,520mm
Loading height: 860mm
Further information:
- Steel welded construction
- Turntable with robust slewing ring
- Folding rear support
- Chocks with holder
- Aluminium side underrun protection
- Full-width rear mudflap (not in combination with forklift bracket)
- Half-shell mudguards on 1st axle with anti-spray mudflaps
- Anti-spray mudflaps behind 2nd and 3rd axles
- Plastic toolbox
- Extendable width to 3,000mm
- Central storage compartment for wooden planks on the loading area
- 70mm wooden planks for extension to 3,000mm
- Lashing eyes low bed
- 1 pair of lashing cutouts recessed in the front longitudinal beam on the gooseneck, each rated at 10 tons
- 4 pairs of lashing holes in the external frame of the gooseneck, each rated at 5 tons (for attaching lashing straps)
- 7 pairs of lashing mushrooms inserted on top and side of the external frame, each rated at 10 tons
- 1x on the gooseneck, 6x in the low bed
- Pair of ring lashing eyes recessed in the external frame, each rated at 5 tons (convertible to stake pockets)
- Additional pair of folding lashing eyes, each rated at 10 tons
- 1x on the gooseneck
- 1x recessed in the floor behind the last axle
Towing device/trailer turntable:
- Drawbar with certified 40mm eye
- Drawbar height adjustable by spring
Axles & suspension:
- Drum brake axles, manufacturer’s choice
- "Laser-measured axles/chassis": reduces tyre wear and fuel consumption
- Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation)
Wheels & tyres:
- 235/75 R 17.5''
- Manufacturer’s choice
- Twin steel rims, factory silver
Bwjdpfxjuytx Se Ah Ssl
Braking system:
- Two-line air braking system
- Spring-loaded parking brake
- 2 non-interchangeable coupling heads at the front, with connecting lines to towing vehicle
- 24V ABS and ALB, with ABS plug at the front, incl. cable
Electrics:
- 24V, multi-chamber lights, yellow LED side lighting
- 2 white position lights at the front
- 2 white/red clearance marker lights at the rear
- 2x 7-pin non-interchangeable plugs at the front, with cable
- LED beacon with bracket, operated via parking lights (removable beacon)
- Pair of warning boards double LED-lit and extendable to 3,000mm
Floor:
- Gooseneck front with steel / checker plate covering
- Storage compartment recessed in the transition slope to the gooseneck
- Then approx. 70mm softwood floor, with steel/checker plate covering in wheel arch areas
- Rear bevel with 70mm softwood floor
- Low bed area including rear bevel 6,500mm
Access ramps:
- Steel ramps, 2,800mm long, 750mm wide, laterally adjustable
- Additional ramp securing, foldable below (prevents lateral shifting of the ramps; not compatible with hydraulic ramp shifting)
- Wood covered (tip portion with steel/checker plate)
- Hydraulic via tractor PTO with throttle, operation at left front side
- Hydraulic connection with SVK plug NW 10/3, incl. connecting hose
Painting:
- Frame hot-dip galvanized incl. passivation
- Ramps hot-dip galvanized
Plus delivery/preparation from stockyard 26639 Wiesmoor: €1,280.00 net
Küçük ilan
Wiesmoor
2.630 km
Alçak şasi römork
FLIEGL3 Achsen Tieflader DTS 300 Luftfederung
Çağrı
Koşul: yeni, azami yük ağırlığı: 23.890 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Vehicle from ongoing production
NEW VEHICLE Fliegl 3-axle low loader, Type DTS 300, hot-dip galvanized
Gross weight: 24,000 kg / 30,000 kg
Payload: 17,890 kg / 23,890 kg
Unladen weight: 6,080 kg
Overall length: 10,900 mm
Loading length: 8,680 mm
Load bed: 6,500 mm including 900 mm approach ramp
Loading height: 860 mm
Air suspension with lift/lower valve
Long ramps 2,800 mm, hydraulically operated
Width extensions to 3,000 mm with warning panels and rotating beacon
Large lashing package with 5.0 t and 10.0 t lashing points
5 pairs of stake pockets
Drawbar eye: 40 mm
Bedpfx Ask N Adksh Sowl
Plus pre-delivery / provision ex-stock Wiesmoor €1,280 net
Lease-purchase offer: Term 48 months, residual value 40%, down payment only the VAT
Monthly rate: EUR 609.00
Küçük ilan
Wiesmoor
2.630 km
Alçak şasi römork
FLIEGLDTS 300 3-Achs Tiefl Luft Hydraul - 780
Çağrı
Koşul: yeni, azami yük ağırlığı: 17.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.670 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, New vehicle: Fliegl 3-axle low-loader trailer with ramps, model DTS 300
Vehicle completely hot-dip galvanized
Gross weight: 24,000 kg / 30,000 kg
Unladen weight: 6,100 kg
Payload: 17,900 / 23,900 kg
Bsdpfx Ahov D T R Es Sjwl
Overall length: 10,890 mm
Loading length: 8,670 mm total, 6,500 mm recessed deck incl. rear bevel / 2,170 mm step deck
Width: 2,520 mm
Loading height: 860 mm
Further information
Plus pre-carriage / handling ex stock 26639 Wiesmoor: €1,280.00 net
Hire-purchase offer: Term 48 months, down payment VAT only, residual value 40%
Monthly rate: €569.00
Steel welded construction
Turntable with heavy-duty ball bearing ring
Foldable rear support
Chocks with bracket
Aluminum side underrun protection
Full-width rear spray flaps (not in combination with forklift holder)
Half-shell mudguards on the 1st axle with anti-spray flaps
Anti-spray flaps behind the 2nd and 3rd axles
1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable
Extendable width up to 3,000 mm (not in the rear bevel)
(The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm)
Storage compartment for timber planks in the center of the loading area
70 mm timber planks for extension to 3,000 mm
Tiedown points low-loader
1 pair of tiedown recesses in the main frame at the front of the step deck, each 10 t
4 pairs of lashing holes in the outer frame of the step deck, each 5 t (for lashing strap hooks)
7 pairs of lashing pins recessed in and on the side of the outer frame, each 10 t
1 at the front on the step deck
6 in the low-bed recessed deck
First lashing point 250 mm from the front and the last max. 250 mm from the rear, spacing of lashing points not greater than 1,100 mm
5 pairs of ring lashing eyes recessed in the outer frame, each 5 t (convertible to stake pockets)
2 pairs of additional foldable lashing eyes, each 10 t
1 on the step deck (protruding)
1 recessed in the floor behind the last axle
Drawbar/trailer running gear
Drawbar with tested 40 mm towing eye
Drawbar height adjustment via spring
Axles & suspension
Drum brake axles, manufacturer’s choice
"Laser-measured axles/running gear" for reduced tire wear and fuel consumption
Air suspension with raise & lower valve
Wheels and tires
235 / 75 R 17.5" tires, manufacturer’s choice
Twinned steel rims, factory silver
Braking system
Two-line air brake system
Spring-loaded parking brake
Vehicle stability system
Axle load detection via EBS CAN bus signal, for display in driver's cab—truck must be suitably equipped, no installation on truck (not a calibrated scale)
2 foolproof coupling heads at front, with connecting lines to tractor unit
24 V EBS, electronic braking system with EBS connector at front, with connecting cable
Note: The trailer may only be towed by vehicles that guarantee the effectiveness of ABS!
Electrics
24 V, multi-chamber lights, yellow LED side marker lights
2 white position lights at front
2 white/red track marker lights at rear
2 x 7-pin foolproof connectors at front, with connecting cable
1 LED beacon with bracket, controlled via position light (removable beacon)
2 pairs of warning panels, double LED illuminated, extendable to 3,000 mm
Floor
Front step deck with steel/chequer plate surface
Storage compartment recessed in transition to step deck
Then approx. 70 mm softwood floor, steel/chequer plate in the wheel arch area
Rear bevel with 70 mm softwood floor
Low-loader deck incl. rear bevel: 6,500 mm
Ramps
Steel ramps, 2,800 mm long, 750 mm wide,
Küçük ilan
Wiesmoor
2.630 km
Alçak şasi römork
FLIEGLDTS 300 3-Achs Tiefl 6,5 Parabel Feder - 843
Çağrı
Koşul: yeni, azami yük ağırlığı: 17.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.670 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, Gross vehicle weight: 24,000kg / 30,000kg
Unladen weight: 6,100kg
Payload: 17,900kg / 23,900kg
Overall length: 10,890mm
Loading length: total 8,670mm, gooseneck 2,170mm, loading deck 6,500mm
Width: 2,520mm
Loading height: 860mm
Additional information
plus pre-carriage / delivery ex-stock 26639 Wiesmoor €1,280.00 net
Chassis Lowbed Trailer
Steel welded construction
Turntable with heavy-duty ball race
Rear supports foldable
2 wheel chocks with holders
Aluminium side impact protection
Full-width rear spray flap (not in conjunction with forklift bracket)
Quarter shell mudguards in front of 1st axle
Anti-spray mud flaps behind 2nd and 3rd axle
1 lockable plastic toolbox, w=600mm / h=425mm / d=460mm
Extendable outriggers for widening to 3,000mm (not in rear bevel)
(Track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550mm)
Timber storage compartment centrally located on the loading area
70mm timber planks for extension to 3,000mm
Lashing eyes low loader
1 pair of front lashing recesses in main beam at gooseneck, each 10t
4 pairs of lashing holes in the outer frame of the gooseneck, each 5t (for attaching ratchet straps)
7 pairs of lashing points (studs) inset at top and side of outer frame, each 10t
1x at front on gooseneck
6x in well deck
First lashing eye 250mm from front, last max. 250mm from rear, distance between lashing eyes max. 1,100mm
5 pairs of recessed ring lashing eyes in outer frame, each 5t (convertible to stake pockets)
2 pairs of additional folding lashing eyes, each 10t
1x on gooseneck (protruding)
1x recessed in floor behind last axle
Towing gear Turntable trailer
Drawbar with certified 40mm towing eye
Drawbar height adjustment by spring
Axles and suspension
BPW drum braked axles
"Chassis/axle alignment with laser" to reduce tyre wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (walking beam equalizer)
Wheels and tyres
235/75 R 17.5"
Manufacturer's choice
Steel rims twin configuration, factory silver
Brake system
2-line air brake system
Spring-loaded parking brake
2 fail-safe couplings at front, connection lines to tractor unit
24V ABS and ALB, ABS socket at front, with connection cable
Note: This trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS!
Electrics
24 volt, multi-chamber lamps, yellow LED side marker lights
2 white position lights at front
2 white/red lane marker lights at rear
2x 7-pin fail-safe plugs at front, with connecting cable
1 LED beacon with bracket, controlled via sidelights (beacon removable)
2 pairs of warning panels, each LED illuminated and extendable to 3,000mm
Floor
Gooseneck clad with steel/chequer plate
Storage box inset in transition to gooseneck
Subsequent area fitted with approx. 70mm softwood floor, in wheel arch areas with steel/chequer plate
Rear incline with 70mm softwood flooring
Lowbed area incl. rear incline 6,500mm
Loading ramps
Steel ramps 2,800mm long, 750mm wide, laterally adjustable
Additional lower ramp locks folding (to prevent lateral slipping of ramps, not in conjunction with hydraulic side ramp shift)
Planked with timber (ends with steel/chequer plates)
Bodpfx Ajwlmr Rjh Sewl
With spring assist
Operating instructions
For a 10,000kg axle load, a special permit is required, only indivisible loads permitted!
For application of a sp...
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglSDS 510 mit Tiefbett
Çağrı
Koşul: yeni, makine/araç numarası: Produktpalette, boş ağırlık: 14 kg, azami yük ağırlığı: 35 kg, toplam ağırlık: 50 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, lastik durumu: 100 yüzde, Further information
Chassis: Low-bed semi-trailer
Steel welded construction, fifth wheel plate with replaceable twin kingpins
24 t, 2-speed landing gear, single-sided operation, with straight lower section, without compensating device
Foldable rear support
2x wheel chocks with holder
Aluminium side underrun protection
Quarter shell mudguards in front of and behind axle assembly
Bwodpfji Ri Hgsx Ah Ssl
Splash guards installed behind each axle
1x storage box, width: 2,350 mm x length: 730 mm x height: 640 mm, mounted transversely at the front on the floor of the gooseneck, with 2 storage trays
Extensions extendable to 3,000 mm (not in rear bevel) (Note: Track width of machines or vehicles to be transported must not exceed outer frame width of 2,550 mm)
Storage compartment for wooden planks on gooseneck, mounted transversely at the front
70 mm wooden planks for extension to 3,000 mm
Excavator arm recess from above the rear axles to the rear, approx. 500 mm wide and approx. 230 mm deep
Tie-down points, low-bed
3 pairs of 10 t lashing eyes at the front gooseneck, 8 pairs of 10 t lashing eyes in the low-bed section, 3 pairs of lashing rails in the track area of the low-bed, 3 pairs of 10 t lashing eyes in the axle/rear area
Axles & Suspension
SAF drum brake axles
Axles/chassis laser-aligned to reduce tyre wear and fuel consumption
With steering axle
Air suspension
Wheels and Tyres
235/75 R 17.5
Manufacturer's choice
Steel twin wheels, factory silver
Braking system
2-line compressed air brake system; colour-coded air lines for easy servicing
Spring-loaded parking brake
EBS (Electronic Braking System) with EBS socket at the front, without connection cable
Note: This trailer may only be towed by towing vehicles which provide effective ABS functionality!
2 tamper-proof coupling heads at the front, without connection line
With lift and lower valve, holding function in lowered position + auto-reset function
Axle load detection via EBS CAN bus signal, for display in the cab (truck must be prepared accordingly, no installation in truck, not a calibrated scale)
Vehicle stability system
Trailer Info Center, for displaying vehicle data such as axle loads (not a calibrated scale), mileage and diagnostic/system messages
Electrics
24 Volt, multi-chamber lights, yellow LED side marker lights
2 white LED position lights at the front
2 white/red lane illumination lights at the rear
2 x 7-pin tamper-proof sockets at the front, no connection cable
1x additional LED work light at the rear, switched via reversing light
1x LED beacon with bracket, switched via parking lights (removable beacon)
2 pairs of warning panels, double, LED illuminated, extendable to 3,000 mm
Floor
Gooseneck with steel/checker plate covering
In the track area with 70 mm softwood floor, in the wheel arch area with steel/checker plate covering; low-bed section left and right in the track area can be raised hydraulically via truck PTO
Rear inclination with 70 mm softwood floor
Low-bed length approx. 6,300 mm
Side walls
25 mm aluminium hollow profile, 400 mm high, plug-in type at the front and sides of the gooseneck
Access ramps
Steel ramps 2,800 mm long, 750 mm wide, side-mountable
Küçük ilan
Wiesmoor
2.630 km
Alçak şasi römork
FLIEGLTPS 140 Bau mit Heckanschr. 6,2m Tandem Plattfor
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.600 kg, toplam ağırlık: 14.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Vehicle / Body: Tandem trailer
First registration: New vehicle
Gross weight: 14,000 kg
Unladen weight: 3,400 kg
Payload: 10,600 kg
Overall length: 8,080 mm
Loading length: 6,200 mm including rear bevel
Width: 2,550 mm
Loading height: 900 mm
Further information
plus freight / provision from stock 26639 Wiesmoor €1,280.00 / net
- Platform width approx.: 2,480 mm
- Drawbar length approx.: 1,750 mm
Vehicle consisting of:
Central axle trailer chassis
Fine-grain steel welded construction
Outer frame slightly sloped, new version with "Load-Lock profile" for lashing strap attachment
6 pairs of lashing rings outside in floor/outer frame, each 5t
3 pairs of lashing rings outside in floor, each 5t
1 x front in the corners, 1 x before and 1 x in the rear bevel at the back
Gear support leg at front
Foldable rear supports
Wheel chocks with holder
Steel underrun protection
Full-width rear mudflap (not in combination with forklift holder)
Quarter-shell mudguards
1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable
Towing device for central axle trailer
Drawbar with certified 40 mm eye
Height adjustable drawbar via spindle, max adjustment range 250 mm
Axles & Suspension
Drum brake axles, manufacturer’s choice
"Axles/chassis laser-aligned" to reduce tyre wear and fuel consumption
Air suspension with raise & lower valve
Wheels & Tyres
235 / 75 R 17.5"
manufacturer’s choice
Steel twin rims, factory silver
Brake system
Bwedpfoy Dzk Sex Ah Sol
2-line compressed air brake system
Spring loaded parking brake
2 non-interchangeable coupling heads at the front with connection lines to the towing vehicle,
24 Volt EBS, electronic braking system with EBS socket at front and connecting cable
Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS!
Electrics
24 Volt, multi-chamber lights, yellow LED side marker lights
2 white position lights at front
2 white/red lane marker lights at rear
2 x 7-pin non-interchangeable plugs at front, with connection cable,
Floor
Steel/ribbed plate floor for high point load resistance
Note: slight floor unevenness possible due to welding distortion!
Platform length approx. 6,200 mm
Rear bevel approx. 900 mm
Front wall / corner stanchions at front
25 mm aluminium hollow profile, 400 mm high
Side walls
25 mm aluminium hollow profile, 400 mm high, foldable and removable
Rear wall / rear corner stanchions
1 pair of steel stanchions fixed to frame with bracket for securing ramps, entry width approx. 2,430 mm
Loading ramps
Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable
with hand grip on ramps
with wooden covering (front section with steel/ribbed plate)
with gas strut for one-person operation
Operating notes
The stated gross weight is technically possible; depending on the load, the gross weight may not be achieved while complying with permitted axle, nose, and fifth wheel loads. (Poor driving and trailing behavior due to incorrect load distribution possible)
Special permit required for trailer train length exceeding 18,750 mm. Observe country-specific registration regulations.
Country of registration / plates
Country of registration: Germany
with Dekra inspection and certificate (according to §13 EC-FGV)
24/7 service hotline
prepared for single-line number plate holder
Contour marking with reflective strips acc. ECE R 048, white on sides, red at rear
Paintwork
Frame DB 7350 Novagrau
"10-year anti-perforation warranty"
Front wall aluminium
Side wall anodized aluminium
Ramps hot-dip galvanized
Küçük ilan
Bottrop
2.595 km
Açık yarı römork
FLIEGLSattelpritsche mit Bordwänden und 3 Achsen
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 28.410 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2012, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 700 mm, FLIEGL yan camlı ve 3 akslı dorse
Bwsdpfxowgghne Ah Sjl
Yararlı yük: 28.410 kg
Tip: SDS350
Fren: Disk fren
Aks: BPW
+ Havalı süspansiyon
2x destek ayağı (JOST)
Uzunluk: 13,60 m
Genişlik: 2,40 m
Yükseklik: 0,70 m
Finansman/kiralama alanında da partnerlerimizle size memnuniyetle destek oluruz.
Tüm bilgiler garanti edilmez. Hata ve ara satış hakkı saklıdır.
Küçük ilan
Apeldoorn
2.688 km
Yükleme platformu
FlieglDPS 300 2016 BPW, Trommelremmen
Çağrı
Koşul: ikinci el, ilk tescil: 09/2016, renk: diğer, Üretim yılı: 2016, Donanım: ABS, = Diğer seçenekler ve donanımlar =
- BPW dingilleri
- Kaldırılabilir dingil
- Davlumbaz frenler
= Notlar =
Fliegl,
2016,
BPW dingilleri,
Birinci dingil kaldırılabilir,
davlumbaz frenler
= Firma bilgileri =
Banka bilgileri:
Rabobank Hesap No: 39.33.10.655
IBAN: NL73RABO0393310655
SWIFT kodu: RABONL2U
- İşlemden önce banka bilgilerimizi mutlaka kontrol edin!
- Araç rezervasyonu depozito olmadan mümkün değildir.
- Tüm ilan edilen araçlarda yazım ve metin hataları yapma hakkımız saklıdır.
Bodjy Avafjpfx Ah Sowl
Sizin için aramayı kolaylaştırıyoruz: "fliegl dts 300 mit radmulden"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.






















































































































































































