Alçak şasi römork

FLIEGL VTS 400 Tieflader mit Radmulden Luft/ Hydr.

Durum: yeni, boş ağırlık: 9.650 kg, azami yük ağırlığı: 30.350 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 9.740 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 r17,5 zoll, Üretim yılı: 2026, Donanım: ABS, merkez döner tabla, 4-AXLE LOW LOADER IN TOP SPECIFICATION! => HOT-DIP GALVANIZED (CHASSIS FRAME, BOGIE FRAME, LOADING RAMPS) => FULL AIR SUSPENSION => WITH LIFTING AND LOWERING FUNCTION (REAR AXLE UNIT!) => SAF LOW LOADER AXLES => LASHING PACKAGE => PERFORATED OUTER FRAME FOR ADDITIONAL LASHING POINTS => CLIMBING STRIPS AT THE REAR OF THE INCLINED RAMP => 6 LASHING POINTS IN THE EXCAVATOR ARM RECESS AT THE REAR => LONG ONE-PIECE LOADING RAMPS => LOW LOADING ANGLE Perm. total weight: 40,000 kg Payload approx. 30,350 kg Chassis frame hot-dip galvanized Bogie frame hot-dip galvanized Loading ramps hot-dip galvanized Air suspension SAF axles with drum brakes EBS Electronic Braking System Tyres 235/75R17.5 – 16-ply Low-bed length approx. 7,160 mm Excavator arm recess approx. 3,000 x 730 x 180 mm at the rear of the low-bed 4 pairs of recessed lashing rings rated at 10 t in the low-bed 2 pairs of recessed lashing rings rated at 10 t in the upper bed 4 pairs of lashing points rated at 3 t in the outer frame (low-bed) 3 pairs of lashing eyes rated at 6 t on the outer frame 4 pairs of stake pockets on the outer frame (upper bed) 4 pairs of stake pockets on the outer frame (low-bed) 3-metre extension package with folding outriggers, without slope 4 x warning signs with lighting Rotating beacon at the rear LARGE STEEL TOOLBOX under the loading platform 2 storage compartments with folding lids in the upper deck Hydraulic ramp lifters One-piece ramps approx. 3,150 x 750 mm Softwood timber decking for loading platform and ramps 40,000 kg GVW only with special permit under §70 => Delivery freight cost: €2.90 plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hauptmann Tel. DOLL VEHICLE MANUFACTURING *Subject to prior sale and changes!* *Price valid ex works D-86368 Gersthofen* *Sales to business customers only!* *Images may differ and are for general reference only => may show/contain optional equipment at extra charge* Gbedpfx Amohvxgzjbow

Durum: yeni, boş ağırlık: 408 kg, azami yük ağırlığı: 1.018 kg, toplam ağırlık: 1.350 kg, yükleme alanı uzunluğu: 2.500 mm, yükleme alanı genişliği: 1.565 mm, yükleme alanı yüksekliği: 150 mm, yükleme alanı hacmi: 0,8 m³, renk: diğer, inşaat yüksekliği: 660 mm, çalışma genişliği: 2.250 mm, Manufacturer: Humbaur Model: Absenkanhänger HKT 132515 S Permissible total weight: 1,350 kg Payload: 1,018 kg Unladen weight: 332 kg Internal dimensions: 2,500 x 1,565 x 150 mm Tires: 195/50 R13C Loading height: 420 mm Gsdpfx Amegf Nbtobsbw - Bolted, hot-dip galvanized chassis - Loading platform hydraulically lowerable - Mechanical safety lock for the swivel axle during driving operation - Humbaur multifunction lighting - With rear drive-on point - Rear license plate holder can be swung out of the way for loading - 15 mm thick wooden floor - Side walls made of aluminum, 150 mm high, with 4 pairs of integrated lashing rings (400 kg pulling force per ring, Dekra certified) - Corner sockets on all four corners, e.g., for a tarpaulin frame Options: 100 km/h road permit: 150 € Tarpaulin and frame, clear loading height 160 cm: 899 € Tarpaulin and frame, clear loading height 180 cm: 999 € Tarpaulin and frame, clear loading height 200 cm: 1,099 € Tarpaulin color freely selectable Motorcycle wheel chock ACE Bikes: 150 € Price includes vehicle registration document (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun Upon request, we can provide a free transit license plate. We repair trailers from all manufacturers. Further accessories available upon request. Technical modifications, price changes, and errors excepted. No liability for mistakes or printing errors. Features: reverse-automatic braking system, rubber suspension axle, loading ramp, tiltable loading platform, jockey wheel, marker lights, bolted hot-dip galvanized chassis, braked, incl. warranty, hydraulically lowerable loading platform, mechanical safety lock for swivel axle during driving operation, Humbaur multifunction lighting, rear drive-on point, rear license plate holder can be swung out of the way for loading, 15 mm thick wooden floor, aluminum side walls 150 mm high with 4 pairs of integrated lashing rings (400 kg pulling force per ring, Dekra certified), corner sockets for e.g. tarpaulin frame on all corners, 13-pin plug and reversing light.

Durum: ikinci el, boş ağırlık: 9.400 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, ilk tescil: 03/2024, bir sonraki muayene (TÜV): 03/2027, yükleme alanı uzunluğu: 9.450 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5, renk: kırmızı, Donanım: ABS, EBS Tamburlu fren Yükleme alanının genişliği 2.550 mm / 3.000 mm Kapasite 30.600 kg NATO bağlantı prizli elektro-hidrolik pompa ünitesi Hidrolik rampalar, yana kaydırmalı Hidrolik destek ayakları SAF akslar Kazıcı küreği taşıma kasası 3 metreye kadar genişletilebilir Yükleme kenarı yüksekliği 910 mm Gbjdpfx Aszzdx Djmbow Yeni fiyat 72.000,00 € (KDV hariç) Hatalar ve önceden bildirilmemiş değişiklikler saklıdır.

Durum: yeni, azami yük ağırlığı: 30.010 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 10.000 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New vehicle: Fliegl 4-axle low loader trailer with wheel recesses and split ramps, type VTS 400 RM Lease-purchase offer: 48-month term, down payment only VAT, final residual value 40% Monthly rate: EUR 899.00 Vehicle / Body: Low loader First registration: New vehicle Gross weight: 24,000 kg / 40,000 kg Unladen weight: 9,990 kg Payload: 14,010 kg / 30,010 kg Overall length: 12,000 mm Load length: total approx. 10,000 mm, gooseneck approx. 2,850 mm, loading deck including rear bevel approx. 7,150 mm Width: 2,550 mm Loading height: 900 mm Further information: Chassis: Low loader trailer Steel welded construction Turntable with heavy-duty ball race Rear support foldable Wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st & 2nd axle with anti-spray flaps behind each axle, anti-spray flaps behind the 4th axle Excavator arm recess above the rear axles, extending to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes, each rated 5 t, in the excavator arm recess at approx. 300 mm from the front and approx. 200 mm before the rear bevel Spare wheel holder for 1 spare wheel, mounted vertically on the front center of the gooseneck. Spare wheel manufacturer as base tires, steel rim Storage box sunken into the floor of the gooseneck with cover, W=720 mm / L=520 mm / D=170 mm 1st pair of wheel recesses behind gooseneck, fitted in low-bed lane area, ramped entrance, bottom length approx. 1,600 mm, approx. 400 mm deep. Note: Main frame is 400 mm higher than wheel recess in this area. 2nd pair of wheel recesses between axles, fitted in low-bed lane area, ramped entrance, bottom length approx. 600 mm, approx. 300 mm deep. Note: Main frame is 300 mm higher than wheel recess in this area. Extendable width up to 3,000 mm (extension not available at the rear bevel or inside wheel recesses). (Track width of machines/vehicles to be transported must not exceed external frame width of 2,550 mm) Storage compartment for timbers under the low bed deck 70 mm timbers for extension to 3,000 mm Lashing points low loader: 1 pair of recessed ring lashing points at front of gooseneck, each 5 t 4 pairs of lashing holes in external frame, each 5 t (for hook-in ratchet straps) 8 pairs of welded-on lashing mushrooms, top and sides of the external frame, each 10 t 2x at front on gooseneck 6x in the low bed First lashing point 250 mm from the front, last max. 250 mm from rear; distance between lashing points not greater than 1,100 mm 5 pairs of stanchion pockets recessed in the external frame, internal 70 x 40 mm (can be converted to 5 t ring lashing points, not included) 1 pair of additional folding lashing points recessed in the floor, each 10 t 1x inside next to main frame at start of low bed 2 pairs of additional folding lashing points, each 10 t 1x on gooseneck (protrudes) 1x recessed in floor behind rearmost axle Drawbar coupling for turntable trailer: Gbedstrizkspfx Ambew Drawbar with tested 50 mm coupling eye, coupling eye angled at 8° D-value min. 160 kN Axles + Suspension: BPW drum brake axles Laser-aligned axles/chassis; reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation at front (rocker compensation) Wheels and tires: 235/75 R 17.5" Manufacturer’s choice, with M+S marking Steel rims in twin-wheel configuration, factory silver Braking system: 2-line compressed air brake system Spring-loa

Durum: ikinci el, boş ağırlık: 8.940 kg, azami yük ağırlığı: 31.060 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, ilk tescil: 03/2026, yükleme alanı uzunluğu: 10.250 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 930 mm, süspansiyon: hava, lastik boyutu: 235/75R17.5, renk: gümüş, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Araç konumu: Bovenden, 4 akslı, döner platformlu, hava süspansiyonlu, ABS (kilitlenme önleyici sistem), 3 metreye kadar genişletilebilir, bağlama halkaları, hidrolik rampalar, arka destek, yan alüminyum koruma, ikiz lastik, tekerlek yuvaları. Gjdpfx Amezr Rmijbebw Üstyapı: Tekerlek yuvaları, ekskavatör kolu yuvası ve hidrolik rampaları olan 4 akslı, alçak platformlu römork. Galvanizli, 4x 10 ton akslı, tambur frenler, toplam ağırlık teknik olarak 40000 kg, 3000 mm'ye kadar genişletilebilir! Platformun üstündeki uzunluk yaklaşık 2800 mm! Platformun altındaki uzunluk yaklaşık 7450 mm! Rampa uzunluğu yaklaşık 2900 mm! Öndeki tekerlek yuvasının yükseklik: yaklaşık 550 mm! Arkadaki tekerlek yuvasının yükseklik: yaklaşık 620 mm! Öndeki tekerlek yuvasının uzunluğu yaklaşık 1600 mm! Arkadaki tekerlek yuvasının uzunluğu yaklaşık 600 mm! AKSESUARLARIN MEVCUTLUĞU GARANTİ EDİLMEZ, değişiklikler, ön satış ve hatalar saklıdır!

Durum: yeni, azami yük ağırlığı: 30.740 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, Üretim yılı: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lower function and RtR valve * Smard-Board for load weight measurement * Warning panel packages at front & rear * Side and rear reflective contour tape * Rotating beacon (removable) at rear * LED lamp * Straight drawbar with 50 mm towing eye and infinitely adjustable height setting * Tool box made of powder-coated steel sheet and spare wheel holder in basket design, right side * Closed individual plastic mudguards at the front * Straight steel mud flaps with splash guards at the rear (spray suppression) * Side underrun protection * Extension of the turntable platform at front by 520 mm with 45° corners and three recessed storage compartments incl. lid and lockable * Chassis made of high-strength fine-grain steel * Platform floor over turntable platform made of 50 mm and in low-loader platform of 60 mm coniferous wood * Outer planks of the drive-on ramps made of hardwood * Four stake pockets each side (stakes not included), with simultaneous 2 t lashing capability * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform * Two pairs of 13.4 t lashing rings each at the front and rear of the side outer frame, and four pairs of 10 t lashing rings each side, swiveling and lowerable * Loadable in all directions and recessed into the outer frame * Two pairs of 6.4 t lashing rings at the excavator stick recess on each side * 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening planks stored in side left storage compartment * Excavator stick compartment above rear axle up to end of drive-on slope, approx. 2,100 x 740 x 190 mm * Mechanical support legs at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm, incl. hydraulic side ramp shift and load holding valve * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height laden: approx. 890 mm, +/- 20 mm (including 860 mm drive-on slope) Godpfx Asl Tik Njmbjbw * Flow divider installed * Chassis, turntable, drive-on ramps, folding outriggers and mechanical support legs hot-dip galvanized * Axles, drawbar, air reservoir and slewing ring painted in black * Tires 235/75 R 17.5 * New vehicle without first registration with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf, on the A7