Alçak yükleyici

Fliegl SDS 470 T mit Radmulden

Further information

Vehicle consists of:
Chassis: Low-bed semi-trailer
Steel welded construction, kingpin plate with replaceable 2-inch kingpin and two kingpin positions
24 t, 2-speed landing gear, operated from one side, with straight foot, without telescopic compensation
Foldable rear support
2 wheel chocks with holders
Side underrun protection made of aluminium
Quarter-circle mudguards in front of and behind axle modules
1st pair of wheel recesses sunken into the low-bed loading area behind the gooseneck, bevelled for entry. Length at base approx. 1,600 mm, depth of recesses approx. 260 mm. Note! The frame is 260 mm higher than the wheel recess in the main beam area.
2nd pair of wheel recesses between axles A and B. Length at base approx. 350 mm, depth approx. 260 mm. Note! The frame is 260 mm higher than the wheel recess in the main beam area.
If wheel loaders are to be transported and the total height needs to be checked, please provide the technical data sheet for the respective wheel loader types with precise dimensions (if total height is exceeded -> customer assumes risk, permit required); depending on ground clearance under the machines, inserts in the wheel recesses may be required on the customer's side.
Wheel recess covers pull-out from the main frame, with wooden inlays.
Extensions can be pulled out to 3,000 mm (not possible in rear slope area and not at the base of the wheel recesses) (track width of construction machines/vehicles to be transported must not exceed external frame width of 2,550 mm).
Storage compartment for wooden planks on gooseneck, transverse at the front
70 mm wooden planks for widening to 3,000 mm
Tie-down points on low-bed
2 pairs of ring lashing eyes, each 5 t, at the front on the gooseneck
11 pairs of lashing points (Zurrpilze) recessed into the top and side of external frame, each 10 t
- 2x on gooseneck
- 9x on low-bed deck (first eye 250 mm from the front, last max. 250 mm from the rear, distance between eyes not greater than 1,100 mm)
8 pairs of stanchion sockets recessed in the external frame, internal dimensions 70 x 40 mm, or alternatively 5 t ring lashing eyes recessed in the floor instead of sockets
Axles + Suspension
SAF drum braked axles
Axles/chassis laser-aligned to reduce tire wear and fuel consumption
Air suspension
Wheels and Tires
235 / 75 R 17.5
to manufacturer’s choice
Steel twin wheels, factory silver
Braking system
2-line air brake system
Spring-loaded parking brake
EBS, electronic braking system with EBS socket at front, no connection cable
Attention: The trailer may only be towed by tractors that ensure full ABS functionality!
2 non-interchangeable coupling heads at front, without connecting pipe
With lifting & lowering valve
Axle load detection via EBS CAN bus signal, for indication on the truck’s cab display – truck must be pre-equipped accordingly, not truck-installed (not certified as a weighing system)
Vehicle stability control system
Electrics
24 volts, multi-chamber lights, yellow LED side marker lights
2 white position lights at the front
2 white/red lane marker lights at rear
2 x 7-pin non-interchangeable sockets at front, without connection cable
1 x LED beacon with bracket, controlled via parking light (rotating beacon detachable)
2 pairs of warning boards, double-sided, LED illuminated and extendable to 3,000 mm, removable with plug
Floor
Rsdei Ri Hcepfx Aaasch
Gooseneck with steel/checker plate covering
Storage box integrated in inclined drive-over area to gooseneck
- Then 70 mm softwoo

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.