Alçak yükleyici yarı römork

Faymonville MAX Trailer 3-Achs-Tele-Semi-Radmu.-Ram.

Gooseneck:
- Gooseneck with rear chamfer approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring

Loading platform:
- Telescopic loading platform with rear bevel approx. 1,000 mm x 8°
- 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm
- Wheel recesses with 15 x 15 mm square climbing strips and lower section widenings
- Between the 1st and 2nd axles, one pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm
- Recess in the chamfer as well as projecting into the loading platform to accommodate the excavator dipper stick approx. 2,900 x 750 x 210/290 mm
Podoup U Hzspfx Agysgu
- 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN)
- 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN)
- 2 pairs of fold-out lashing rings on the outside (LC 10,000 daN)
- Cutouts on the outer frame of the loading platform for attaching tension straps (LC 2,000 daN)
- Includes 3-piece removable galvanized covers over the wheel recesses – max. point load 3.5 t / piece

Hydraulic two-piece steel ramps:
- One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering
- Ramps with hydraulically folding ramp sections, hydraulic lifting system, and lateral hydraulic adjustment

Axles and tires:
- BPW axles and suspension, 2 rigid axles, 1 self-steering axle
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock, activated via reverse gear and manually
- Air suspension with lift/lower valve
- Axle tools
- Tires 235/75 R 17.5

Accessories included:
- 2” King pin
- One galvanized steel front wall approx. 400 mm high
- One spare wheel with holder in front of the front wall
- Yellow-red air couplings on the galvanized connector bar at the front
- 4 wheel chocks with holder on the front wall
- Mounting at the rear of the gooseneck for ALU loading ramps
- Galvanized extendable widenings, extendable by approx. 230 mm per side
- Galvanized folding supports under the bevel of the loading platform
- Bracket for a beacon lamp at the rear of the trailer
- White reflective tape according to EU regulations on the sides, extendable parts and rear in red
- Gooseneck and rear panel left and right with a holder for warning signs including receptacle
- One mud flap at the rear of the trailer
- European reflector plates (red-yellow) at the rear of the trailer
- On gooseneck: plug-in ALU side and rear boards approx. 2,440 x 400 mm
- Rear galvanized plug-in stakes removable (superstructure length approx. 2,560 mm)
- 2 pairs WADER container pockets in the loading platform for a 20 ft or 30 ft container
- 3 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area
- One removable galvanized intermediate table with 1 pair of WADER container pockets
- Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading platform chamfer
- Four extendable warning signs, approx. 400 mm extendable, size approx. 423 x 423 mm, each with a position lamp
- Holder for beacon lamp fitted to warning signs
- 80 km/h speed stickers at the rear and on both sides
- Load manometer for determining axle loads, including load diagram
- HRM metallization (High Resistance Metallisation) of the outer frame
- Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (Zinc 85% - Alu 15%)

Optional extras:
- One toolbox on the gooseneck

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.