Kullanılmış Fliegl Szs 310 Jumbo Plateau Holz satın al (1.889)

Koşul: yeni, makine/araç numarası: e7fbe178b85a202cade7e95af, boş ağırlık: 5 kg, azami yük ağırlığı: 22 kg, toplam ağırlık: 29 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis: Semitrailer for Forwarding Operators Fine-grain structural steel welded construction, fifth wheel plate with replaceable 2" kingpin, with two kingpin positions. Outer frame slightly inclined with Load-Lock profile for lashing strap hooks. Note! To hook lashing straps in combination with side walls, the side walls must be opened! 2 pairs of lashing eyes recessed in the gooseneck outer frame, each rated at 5 tonnes. 8 pairs of lashing eyes recessed in the outer frame at the lowbed area, each rated at 5 tonnes. 24-ton 2-speed landing gear, single-sided operation, with straight base, without compensating mechanism. 2 wheel chocks with holder. Aluminum side underrun protection. Steel rear underrun protection. Crjdpfxji Ri Hvo Aldjb Quarter-shell mudguards in front of and behind axle assembly. 2 stainless steel toolboxes, width=600/height=400/depth=500 mm, with polished, lockable door. 2 pairs of stake pockets recessed in the gooseneck outer frame, inner dimension 70 x 40 mm. 6 pairs of stake pockets recessed in the outer frame at the lowbed area, inner dimension 70 x 40 mm. Internal width between stakes: 2420 mm! 3 lashing/stake rails in the lowbed, transversely embedded in the floor, over the entire width to the outer frame (usable internal width between outer removable stakes approx. 2170 mm), approx. 100 mm high; with 20 mm round steel bars, top and bottom, spacing between bars approx. 60 mm. Bottom finished with angle sheet, half open downward. Suitable for lashing and inserting stakes 80 x 80 mm. Removable stakes, width=80/depth=50/length=1200 mm, hot-dip galvanized. Removable stakes, width=80/depth=80/length=1200 mm, hot-dip galvanized. Note: Stake pockets/removable stakes are not intended for the sole securing of long materials, pipes, etc. without additional lashing. Mechanical rear extension with hand crank, extendable by approx. 1,500 mm, lockable every 500 mm. Comes with support beam, load capacity over the entire width: 2,000 kg at 500 mm, 1,000 kg at 1,000 mm, and 500 kg at 1,500 mm. Includes retractable rear underrun protection with lighting. 2 pairs of removable stakes, width=80/depth=80/length=1200 mm, hot-dip galvanized. Open storage compartment for removable stakes, at the front wall or under the loading area (for 10 removable stakes 80 x 50 x 1200 mm and 4 removable stakes 80 x 80 x 1200 mm). Axles + Suspension SAF drum brake axles. Axle/chassis laser alignment - reduces tire wear and fuel consumption. Last axle is self-steering with automatic reverse lock via reverse light, and additional lock function on the vehicle via hand knob. Air suspension with raise & lower valve. Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice. Steel twin wheels, factory silver. Braking System 2-line compressed air brake system. Spring-loaded parking brake. 2 foolproof coupling heads at the front, without connecting line. EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection via EBS CAN bus signal for display in the truck cab. The truck must be correspondingly equipped; no truck installation or calibrated weighing system included. Electrics 24 Volt, multi-chamber tail lights, yellow LED side marker lights. 2 white position lights at the front. 2 white/red track marker lights at the rear. 2 x 7-pin sockets at the front, without connecting cable. 2 additional LED work lights at the rea

Koşul: yeni, makine/araç numarası: 1acf251a278ec5cde4067a7b1, boş ağırlık: 5.800 kg, azami yük ağırlığı: 22.200 kg, toplam ağırlık: 28.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r17,5, Further information Chassis Semi-Trailer Forwarder Fine-grain steel welded construction, fifth wheel plate with replaceable 2-inch kingpin Outer frame slightly inclined, new version with load-lock profile for lashing straps 24 t, 2-speed landing gear, operated from one side, straight base, without compensating mechanism Free landing gear corner dimension or rear swing clearance approx. 1920 mm 2 wheel chocks with holders Side underrun protection aluminium Rear underrun protection steel Quarter mudguards in front of and behind each axle 1 spare wheel holder for 1 spare wheel, with wheel fastening kit 1 plastic toolbox, with shelf, width=620 / height=360 / depth=440 mm, lockable with padlock (padlock not included) Axles & Suspension Drum brake axles, as per manufacturer’s choice Axles/chassis laser-measured to reduce tyre wear and fuel consumption Air suspension Brake system Crsdpfx Alskv Uvzedjb 2-line compressed air brake system, color-coded line routing for easier servicing Spring-applied parking brake Duomatic coupling front, without connecting hose EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that can guarantee the effectiveness of the ABS! With lift & lower valve Vehicle stability system Wheels and tyres 235/75 R17.5, brand at manufacturer’s choice Steel rims, factory silver Electrics 24 volt, multi-chamber tail lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 15-pin socket at the front, without connection cable Floor Approx. 30 mm thick phenolic resin plywood for high point load capacity, suitable for forklift axle loads up to max. 5,600 kg Front panel / corner posts front 25 mm aluminium hollow section, approx. 1,350 mm high, corner posts steel in volume version Country of registration / plates Germany With DEKRA inspection and certificate (according to §13 EC-FGV) 24/7 Service Hotline Prepared for single-line license plate holder Conspicuity marking with reflective tape in accordance with ECE R 048, white on the sides and red at the rear Paint Frame hot-dip galvanized including passivation, 15-year anti-perforation warranty Front wall aluminium Attention! Archive images shown!

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 3 kg, azami yük ağırlığı: 8 kg, toplam ağırlık: 11 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, The images are archive images. Further Information: Chassis Central Axle Trailer Fine-grained steel welded construction Outer frame slightly sloped with Load-Lock profile for lashing strap attachment Note: To attach the straps in combination with side walls, the side walls must be opened! Gear support leg at the front Foldable rear support 2 wheel chocks with holders Galvanized steel underrun protection Quarter-shell mudguards 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with a padlock (padlock not included) 1 storage compartment for plug-in stakes, open, below loading area 4 pairs of stake pockets recessed in the outer frame, internal dimensions 83 x 83 mm 4 stake pockets centrally embedded in the floor, reinforced to the main frame, 83 x 83 mm internal dimensions 6 pairs of plug-in stakes B=80/ D=80/ L=2000 mm, hot-dip galvanized Note: Stake pockets / plug-in stakes are not intended for the sole securing of long goods, pipes, etc. without lashing around them Drawbar Equipment Tandem Trailer Drawbar with certified 40 mm towing eye Drawbar mechanically length-adjustable by 4 x 500 mm from 1800 - 3800 mm, drawbar set to 1800 mm, (Note: Observe load distribution and support load) Axles + Suspension GFA axles with tapered roller bearings and S-cam brakes Axles / chassis laser aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load compensation (rocker compensation) Wheels & Tyres 235 / 75 R 17.5, manufacturer’s choice Steel rims, factory silver Braking System 2-line compressed air brake system Spring-loaded parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting lines to the truck, ABS and ALB, with ABS connector at the front and connection cable Attention: The trailer may only be towed by towing vehicles that ensure effective ABS operation! Electrics 24 Volts, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red outline marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cables Floor Phenolic coated plywood panels approx. 30 mm thick, for high point load capacity Note: Floor deformation due to weather conditions possible! Platform length approx. 6,200 mm Operating Instructions The stated total weight is technically possible; depending on the cargo, the total weight may not be achievable while observing the permissible axle, support and kingpin loads. Registration / Plates Country of registration: Germany With Dekra approval and report 24/7 service hotline Prepared for single-line license plate holders Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paint Frame DB 7350 Nova Grey Codpsi Ri H Dofx Aldsrb Attention: Archive images!

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Fuhrpark, boş ağırlık: 6.000 kg, azami yük ağırlığı: 20.000 kg, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2018, lastik boyutu: 205 / 65 r 17,5, Further information: Fine-grained steel welded construction, fifth wheel plate with replaceable 2-inch king pin. Reinforced mounting point for gooseneck coupling with robust wear plates all around, cross-profile made of flat steel below the outer frame. Outer frame slightly sloped with load-lock profile for securing straps. Note: When attaching straps in conjunction with sideboards, the sideboards must be opened! 24-ton 2-speed landing gear, single-sided operation, with straight base, without compensating tube. Wheel chocks with holder, side underrun protection made of aluminum, recessed inwards as far as technically possible, rear underrun protection made of steel with maximum possible ground clearance, quarter circle mudguards in front of and behind each axle, mounting rail for aluminum ramps at the rear, plastic toolbox with shelf (W=620/H=360/D=440 mm), lockable with a padlock (padlock not included). SAF drum brake axles with axle stoppers, axle spacing 1,600 mm, air suspension with lift & lower valve. 205/65 R 17.5, dual arrangement of steel rims, factory silver. 2-line air brake system, spring-loaded parking brake, two non-interchangeable coupling heads at the front (no connecting line), EBS electronic braking system with EBS socket at the front (no connecting cable). Attention: The trailer must only be towed by towing vehicles that ensure the functionality of the ABS! 24 Volt, multi-chamber lighting, lateral yellow LED lights integrated into the outer frame profile recessed by approx. 25 mm, 10 per side. Two protected white position lights at the front, two white/red lane marker lights at the rear, additional LED work light at the rear, switchable via reverse light. Two 7-pin and one 15-pin non-interchangeable sockets at the front, no connecting cable. Approximately 30 mm thick phenolic-coated plywood flooring, designed for high point loads for forklift axle loads up to max. 5,600 kg. Special floor installation: testing of new profiles, no screwing. In the wheel housing area: steel/chequer plate covering. Front bulkhead/corner stanchions 25 mm aluminum hollow profiles approx. 800 mm high. Steel volume corner stanchions with inspection windows on both sides. Credpfomp Ug Dox Aldsb Country of registration: Germany, with Dekra inspection and certificate (according to §13 EC-FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear.

Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33901014232, boş ağırlık: 5.900 kg, azami yük ağırlığı: 29.100 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2025, bir sonraki muayene (TÜV): 07/2026, yükleme alanı uzunluğu: 13.800 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 2.638 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5, renk: diğer, Üretim yılı: 2025, Chassis Semi Low-loader for Haulage Fine-grain steel welded construction, fifth wheel plate with interchangeable 2" kingpin Drive-over and loadable with construction/agricultural machinery up to max. 24,000 kg gross weight and up to a maximum machine width of 2,480 mm (the track width of the machine/vehicle to be transported must not exceed 2,200 mm), with latching bar for aluminium ramps at the rear (wider construction/agricultural machines may not be loaded) Outer frame, slightly sloped new design with "Load-Lock profile" for lashing strap attachment 14 pairs of recessed lashing rings in the outer frame, each rated at 2.5 t 6 pairs of recessed lashing rings in the outer frame, each rated at 5 t 24 t, 2-speed landing gear, single-side operation, straight base, without load equalisation Clear landing gear foot dimension or free swing radius towards rear approx. 1,920 mm Rear folding support 2x wheel chocks with holder Side protection in aluminium Underrun protection steel Quarter shell mudguards in front of and behind each axle With anti-spray flaps behind each axle 1x spare wheel holder for 1 emergency wheel, incl. wheel fixing kit 1x spare wheel, same manufacturer and design as main tyres, steel rim Axles & Suspension SAF drum brake axles "Axles/chassis laser measured" - reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, additionally electrically operated from truck, including forced lowering & starting aid, without truck installation (starting aid functional up to axle overload of 30% and up to max. 25 km/h) Brake System 2-line compressed air brake system Colour-coded line routing for easy service. Spring-loaded parking brake 2 non-interchangeable coupling heads at front, without interconnection pipe 24 Volt EBS, electronic braking system with EBS socket at the front, without connection cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! With raise & lower valve Vehicle stability system "TPMS" Tyre Pressure Monitoring System according to ECE R 141, displayed via the truck's display, via EBS, without truck installation (precondition must be met in the truck. Only for main tyres) Wheels and Tyres 12x 235/75 R17.5 Twin tyres 12x steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting synchronised with indicator "Flashing side marker lights" 2 white LED position lamps at the front 2 white/red track marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connection cable Floor Birch plywood approx. 30 mm, high point load capacity for forklift axle load up to max. 5,600 kg Front bulkhead / front corner posts Crjdpfsxb D Swex Aldsb 25 mm aluminium hollow profile, 1,350 mm high, steel corner posts in volume design Front bulkhead inside additionally plated with 1,250 mm high birch plywood

Koşul: yeni, makine/araç numarası: 3c70e9a5d82cfb3ada79baf95, boş ağırlık: 8 kg, azami yük ağırlığı: 17 kg, toplam ağırlık: 26 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 205 / 65 r 17,5, Further Information Chassis Semi-Trailer for Freight Forwarding Fine-grain steel welded construction, kingpin plate with interchangeable 2-inch kingpin, rear bevel to approx. 1920 mm, continuous hook-in profile for ramps at the rear and front on the gooseneck, wear rollers at the rear, lowered deck from the kink to the axle assembly. Drawing approval required from the customer upon placing the order! Pair of lashing mushrooms recessed on top and side of the outer frame, each 10 tons Pair of lashing rings recessed in the outer frame on the gooseneck, each 5 tons 24 t 2-speed landing gear, single-sided operation, with straight lower section, without lateral compensation Rear support foldable, mounted externally Chocks with holder Side underrun protection, aluminium Underrun protection, steel, for EU standards, if technically feasible Quarter-shell mudguards with anti-spray mud flaps to EU standards 1 pair of wheel recesses in the lowbed section after the gooseneck, recessed in the driving lane area, inclined for easier entry. Bottom length approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses at rear bevel. Depth approx. 200 mm. Note! Frame in the main beam area is 200 mm higher than wheel recess. Detailed technical evaluation required after order placement. Wheel recess covers extendable from the lowbed with hardwood inserts, on rear bevel with hardwood inserts. Electrical winch, 24 Volt, pulling force 5500 kg, mounted at gooseneck kink, not extending onto the loading area, operated by remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide roller at the rear bevel. Axles + Suspension SAF or BPW drum brake axles at our discretion Air suspension with raise & lower valve + auto reset function Wheels and Tyres 205 / 65 R 17.5 tyres with 129/127K (132/132G) marking for 8 t tyre load capacity at max. 90 km/h manufacturer’s choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 foolproof couplings at the front, without interconnecting line EBS manufacturer: Haldex, electronic brake system with EBS socket at the front, without interconnecting cable (brake calculation sent to customer for approval, 15.07.2021) Note: The trailer must only be towed by vehicles that ensure the effectiveness of the ABS! Axle load detection via EBS CAN bus signal, for display via dashboard in the tractor unit, truck must be factory-prepared accordingly, not installed in truck (not a certified weighing system) Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without interconnecting cable Floor Gooseneck with steel / checker plate covering 30 mm phenolic plywood floor, in the lowbed between the main beams, center Crodpfx Aoi Ri Hreldob In the driving lane area, with serrated grating, in the wheel recesses with steel/checker plate covering. Ramps Pair of aluminium ramps, 3200 mm long, load capacity per pair 12,000 kg Pair of steel ramps for access to the lowbed Pair of steel ramps for crossing onto the gooseneck Side Boards Registration / Plates Registration country: Germany with Dekra inspection and certificate (according to §13 EC-Vehicle Approval Regulation) Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, yellow on sides

Koşul: yeni, azami yük ağırlığı: 8.665 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 910 mm, toplam genişlik: 2.550 mm, NEW VEHICLE Fliegl Tandem Timber Transport Trailer with Stanchions, Type TPS 118 Holz Total weight: 11,800 kg Unladen weight: 3,135 kg Payload: 8,665 kg Overall length: 8,350 mm Loading length: 6,200 mm Width: 2,550 mm Loading height: 910 mm Additional Information + Pre-transport / provision from logistics location 26639 Wiesmoor €1,280.00 / net Loading width: 2,480 mm Chassis: Central axle trailer Fine-grained steel welded construction Outer frame slightly angled with 'Load-Lock Profile' for securing lashing straps Credpfxow N U I Hs Aldob Gear support foot at the front Foldable rear support 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Open compartment for stanchions under the loading area 4 pairs of stanchion pockets recessed in the external frame, 83 x 83 mm internal dimensions 4 stanchion pockets centrally recessed in the floor with reinforcements to the main frame, 83 x 83 mm internal dimensions 6 pairs of removable stanchions W=80 / D=80 / L=2,000 mm, hot-dip galvanized Note: Stanchion sockets/inset stanchions are not designed for the sole load securing of long materials, pipes, etc., without lashing Aluminum side underrun protection Tandem trailer tow bar assembly Drawbar with certified 40 mm towing eye Drawbar length mechanically adjustable by 4 x 500 mm increments from 1,800 - 3,800 mm, set at 1,800 mm (Note: Observe load distribution and drawbar load) Axles & Suspension GFA or BPW axles, manufacturer’s choice, with tapered roller bearings and S-cam brakes "Axle/Running gear laser-measured" for reduced tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalization) Wheels and Tires 235 / 75 R 17.5" Steel rims, factory silver Braking System 2-line air brake system Spring-loaded parking brake Integrated air tank 2 fool-proof coupling heads at the front, with connecting hoses to the truck, ABS and ALB, ABS socket at the front, with connecting cable Attention: The trailer must only be towed by towing vehicles guaranteeing full ABS functionality! Electrics 24 Volt, multi-chamber LED rear lights, yellow LED side marker lights, LED number plate lighting (Note: depending on towing vehicle, possible diagnostic errors may occur despite full functionality) 2 white position lights at the front (LED) 2 white/red lane lights at the rear (LED) 2 x 7-pin fool-proof plugs at the front with connecting cables Floor Phenolic plywood approx. 30 mm thick for high point-load capacity Note: Floor deformation due to weather influences possible! Platform length approx. 6,200 mm Operating Instructions The stated total weight is technically possible; depending on cargo, the total weight might not be achievable within permissible axle, support, and fifth-wheel loads. Special permit required if the overall towing length exceeds 18,750 mm. Observe country-specific registration regulations. Registration / Plates Registration country: Germany With Dekra inspection and certificate 24/7-Service hotline Prepared for single-line number plate holder Contour markings with reflective strips per ECE R 048, white on sides, red at rear Paintwork Chassis hot-dip galvanized incl. passivation "15-year warranty against rust-through" Note: Floor warping due to galvanizing possible! Vehicle is from ongoing production – delivery time approx. 2–3 weeks.

Koşul: ikinci el, boş ağırlık: 5.300 kg, azami yük ağırlığı: 12.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2010, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.900 mm, yükleme alanı hacmi: 52 m³, süspansiyon: hava, lastik boyutu: 235/75R17,5 ---/141J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 ---/141J, arka lastik boyutu: 235/75R17,5 ---/141J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Lashing eyes, -- Errors, omissions, and changes excepted, sample images --, More data at: !, More details: ! Crsdpfx Aey Niuisldob

Koşul: ikinci el, boş ağırlık: 4.300 kg, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2019, yükleme alanı uzunluğu: 7.200 mm, süspansiyon: hava, lastik boyutu: 445/45 R19,5 160J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 445/45 R19,5 160J, arka lastik boyutu: 445/45 R19,5 160J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, -- Druckfehler, Irrtümer und Änderungen vorbehalten, Musterbilder -- Weitere Informationen unter: !, Mehr Details: ! Crsdpfx Aey Nitroldeb

Koşul: ikinci el, Fonksiyonellik: sınırlı işlevsellik, boş ağırlık: 6.575 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 07/2011, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.300 mm, toplam uzunluk: 13.650 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5, lastik durumu: 30 yüzde, dingil mesafesi: 1.360 mm, Üretim yılı: 2011, Donanım: ABS, Kullanılmış açık yarı römork Uzun demirler için çentikli çelik ön duvar Taban çelik profillerle güçlendirilmiş Crjdpfx Asy Ercbeldeb Yanlarda dikme cepleri Takma dikmeler için depo kutusu

Koşul: yeni, dingil konfigürasyonu: 3 dingil, renk: gri-siyah, vites türü: mekanik, Color natural, lift axle, electronic braking system (EBS), 1x 15-pin connector, features: outer frame slightly angled, new design with "Load-Lock profile" for lashing strap attachment, 13 additional pairs of lashing rings in the outer frame, each rated at 5 to 24 tons. 2-speed landing gear, single-sided operation, with half-round lower section and straight steel forklift collision guard on outer frame (side and rear). 1 spare wheel holder for 1 single tire, including wheel fastening kit. 1 plastic toolbox (650mm x 520mm x 670mm). 7 pairs of stake pockets recessed into the outer frame, 83 x 83 mm. SAF disc brake axles with 430 mm air suspension. First axle as automatic lift axle, including forced lowering function and starting aid, operated by 3x brakes. Wheels and tires: 6 x 385/65 R22.5, manufacturer: 6 steel rims, factory silver. Floor made from ca. 30 mm film-coated plywood panels, cross joints with omega inserts for high point loading capacity, suitable for forklift axle load up to max. 7,100 kg. Front bulkhead/corner stanchions made from 25 mm aluminum hollow profile, 1,950 mm high, corner stanchions in high-volume steel version + 2 additional center supports ("crash-blockers"), bottom inside at approx. 140 mm height. Side walls: 25 mm aluminum hollow profile, 700 mm high. Frame painted: hot-dip galvanized incl. passivation ("15 years anti-corrosion warranty"). Side walls: aluminum anodized. Errors and changes excepted. Cjdpfxstcwmio Aldsrb

Koşul: ikinci el, makine/araç numarası: WFDFLT21801003760, boş ağırlık: 4.480 kg, azami yük ağırlığı: 13.520 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2014, lastik boyutu: 445/45 r19,5, Üretim yılı: 2014, Further Information Fine-grain steel welded construction Crsdpfx Aloni Udzodsb 1 front gearbox support leg, with straight base and single-sided operation on the right in the direction of travel Wheel chocks with holder, aluminium side underrun protection, steel rear underrun protection Half-shell mudguards slightly protruding above the main frame, rear impact bumper Tandem trailer coupling device Drawbar with certified 50 mm towing eye, forwarding version, underslung drawbar Axles & Suspension BPW disc brake axles, manufacturer’s choice Air suspension with lift & lower valve Wheels and Tyres 445 / 45 R 19.5, manufacturer’s choice, steel rims in factory silver Brake System 2-line compressed air braking system Spring-loaded parking brake, Duomatic coupling in front, with connecting line to the towing vehicle, EBS, electronic braking system with EBS plug at the front, with connection cable Brand: Haldex Note: The trailer may only be towed by towing vehicles that ensure the ABS functions correctly! Floor: Platform length approx. 7,300 mm, anti-slip plywood floor Front wall: aluminium approx. 1,200 mm, corner posts in high-volume steel design Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 1 x 15-pin socket at the front with connecting cable Approval / License Plates Country of approval: Germany, with Dekra inspection and certificate 24/7 service hotline, prepared for single-line number plate holder, contour marking with reflective tape in accordance with ECE R 048, white on the sides and red at the rear.

Koşul: ikinci el, makine/araç numarası: WFDFLT22001011091, boş ağırlık: 5.340 kg, azami yük ağırlığı: 12.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2021, lastik boyutu: 235/75 r17,5, Üretim yılı: 2021, Further information Chassis central axle trailer Fine-grain steel welded construction Type TPS 200 (special permit required) Gear support leg at front Rear support can be folded Wheel chocks with holders Csdpfx Aljp N Dgujdjrb Side underrun protection made of aluminium Full-width rear mud flaps Mud flaps in front of each axle and anti-spray mud flaps behind each axle 1x spare wheel holder for 1 spare wheel, with wheel fixing kit 1x spare wheel, same make as standard tires, steel rim 1x stainless steel toolbox, w=600/h=400/d=500 mm, with polished lockable door Lashing points low loader 5 pairs of stake pockets recessed in the outer frame, inside 70 x 40 mm, (convertible to 5t lashing rings, not included) 7 pairs of lashing mushrooms recessed on the top and side of the outer frame, each rated at 10t 2 pairs of folding lashing rings additionally recessed in the low bed area, each 10t (1 pair at the front and 1 at the rear slope) Drawbar system for central axle trailer Drawbar with certified 50 mm towing eye Axles + Suspension SAF drum brake axles Laser-measured axles/chassis to reduce tire wear and fuel consumption Axle spacing 1810 mm (then 10t axle load technically permitted) Air suspension Braking system 2-line compressed air brake system, color-coded lines for easy servicing. Spring-loaded parking brake Duomatic coupling at front, with connecting line to tractor unit EBS electronic brake system with EBS connector at the front, including connection cable Note: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! With lift & lower valve Vehicle – driving stability system Axle load detection via EBS CAN bus signal, for display in the cabin, truck needs appropriate preparation, not installed in the truck (not a calibrated scale) Wheels and tires 235/75 R17.5, make: Fulda Steel rims, factory silver Electrics 24 volt, multi-chamber lights, yellow side LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 15-pin connector at front including connecting cable 1 additional LED work light at rear, switched via reverse light 1x LED beacon with bracket, powered by position light (removable beacon) Floor Subsequently finished with 70 mm softwood floor, wheel arch area with steel/chequer plate cover Rear incline with Mega Grip surface made from serrated grating Low bed area including rear incline 6500 mm Front wall / corner stanchions 25 mm aluminium hollow profile, 400 mm high, detachable Loading ramps Steel ramps 3600 mm long, 750 mm wide, split by cable tensioning, laterally adjustable Ramp displacement: min. spacing approx. 600 mm, max. outside width approx. 2880 mm Ramp surface with Mega Grip made from serrated grating Operated hydraulically by separate electrohydraulic unit, mounted in steel box, controlling located on right-hand side. Note: NATO socket with connection cable on truck required. Connection cable must not be connected while driving! Hydraulic lateral displacement of ramps, individually controllable (only in conjunction with hydraulic ramp actuation)

Koşul: ikinci el, azami yük ağırlığı: 23.730 kg, toplam ağırlık: 29.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2022, Sol/sağ sürgülü brandalı kasa, sürgülü tavan, EcoLift kaldırılabilir tavan yaklaşık 380 mm, AAC Basic, alet kutusu, SAF destek ayakları, yangın söndürücü tutucu, gri renk Credpfx Aljyf Sy Sodjb

Koşul: ikinci el, toplam ağırlık: 25.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2014, Donanım: ABS, Besuchen Sie unsere Webseite, auf der Sie unseren vollständigen Fahrzeugbestand mit vielen weiteren Fotos und Informationen in mehreren Sprachen finden. SEL 7566 Fliegl SZS 270 Deutsche Zulassung / 1. Hand Erstzulassung: 24.06.2014 Techn. zul. Gesamtgewicht (kg): 27.000 Zulässiges Gesamtgewicht (kg): 25.000 Leergewicht (kg): 5.100 Crjdpfx Alex Ep Eyedob FIN: WFDFLT22701003772 BEREIFUNG UND ACHSEN: Bereifung: 205/65 R 17,5 Achsenkonfiguration: 2 Achsen SAF Luftfederung Trommelbremsen AUFBAU: Innenmaße: Breite (m): 2,48 Länge (m): 9,21 + Klappenhöhe (m): 0,58 FAHRZEUGUNTERLAGEN: Schein Brief DE-Fahrzeuggenehmigungsbogen M. BUFANO m. (Italienisch, Englisch, Deutsch) J. CORDEIRO j. (Portugiesisch, Spanisch, Italienisch, Englisch) J. MARJANOVIC j. (Deutsch, Bosnisch) L. OBODYNSKA Ukrainisch, Russisch Wir sprechen: DEUTSCH, ENGLISCH, ITALIENISCH, SPANISCH, PORTUGIESISCH, UKRAINISCH, RUSSISCH, POLNISCH, BOSNISCH Obwohl alle Anstrengungen unternommen wurden, um die Richtigkeit der Angaben zu gewährleisten, übernehmen wir keine Haftung für Fehler oder Auslassungen. Wir bitten unsere Kunden, die verfügbaren Fotos zu prüfen. Angegebene Maße sind Circa-Angaben. Unsere Fahrzeuge werden im aktuellen Zustand verkauft, in dem sie sich befinden. Wir laden unsere Kunden ein, unser Unternehmen zu besuchen, um den Zustand des Fahrzeugs persönlich zu überprüfen. Außerdem bieten wir die Möglichkeit einer Probefahrt. Es ist zu beachten, dass die mit dem Fahrzeug gelieferten Batterien diejenigen sind, die aktuell eingebaut sind. Sollte der Kunde neue Batterien wünschen, geben wir gerne Preisinformationen dazu.

Koşul: yeni, azami yük ağırlığı: 23.340 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, NEW VEHICLE Fliegl 3-Axle Flatbed Low Loader DTL - S - 300 Agrar, frame and chassis hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Payload: 17,340 kg / 23,340 kg Unladen weight: 6,660 kg Overall length: 11,625 mm Platform length: 9,000 mm incl. 900 mm approach ramp Loading height: 900 mm Comprehensive lashing package Drawbar 40 mm Tyres 235 / 75 R 17.5" dual wheels Without ABS, approval max. 60 km/h Electrical system 12 Volt, LED beacon Ramps with spring assist, ramp length 2,800 mm Vehicle from current production – lead time approx. 14 days. Plus freight/preparation from Wiesmoor depot €1,280.00 / net Towing vehicle LoF, agricultural or forestry registration Hire purchase offer: 48-month term, residual value 40%, down payment only VAT. Crsdpfollwhnjx Aldsb Monthly rate: €599.00

Koşul: yeni, azami yük ağırlığı: 13.200 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.500 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.550 mm, Gross weight: 18,000kg / 21,000kg Unladen weight: 4,800kg Payload: 13,200kg / 16,200kg Overall length: 9,450mm Loading length: 7,500mm incl. rear bevel Width: 2,520mm Loading height: 860mm Additional information: - Frame painted in stock colour Nova grey - 70 mm wooden floor - Steel ramps, 2,800mm long x 750mm wide, laterally adjustable - With spring assist - Folding rear support - Aluminium side underrun protection Crodpfx Aer Da Uveldjb - Plastic toolbox - 3m widening package - Large lashing package – 5 pairs of flush-mounted ring lashing eyes in the outer frame (can be converted to stake pockets), each rated to 5t, 7 pairs of lashing mushrooms flush-mounted at the top and side of the outer frame, each rated to 10t - 50mm towing eye - Air suspension - Lift & lower valve - Axle load detection via EBS CAN bus signal - Tyres: 235/75R17.5 - 2 x 7-pin connectors at the front - LED beacon - 2 pairs of warning boards, double LED illuminated, extendable to 3m Plus delivery/hand-over ex stock location 26639 Wiesmoor €1,280.00 net

Koşul: yeni, makine/araç numarası: eca976917d325d4adc41b69e8, boş ağırlık: 7.200 kg, azami yük ağırlığı: 27.800 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r 22,5, Further information Chassis semi-trailer for freight forwarding High-strength fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2-inch kingpin, main frame reinforcement for 25 t at the center of gravity over 3 m loading length when retracted. 13 pairs of hooks for lashing strap attachment welded to the crossmembers 23 pairs of lashing rings recessed into the outer frame, each rated for 3.5 t Outer frame with load-lock profile for lashing strap attachment Note! Not usable with side walls! 24 t 2-speed landing gear in reinforced version for unhitching while loaded, single-sided operation, with semi-circular lower section and straight mounting plate, with thrust compensation Wheel chocks with holders Aluminum side underrun protection Rear underrun protection Half-shell mudguards With anti-spray mud flaps in accordance with EU regulations 1 spare wheel carrier for 1 spare wheel, with wheel fastening kit 1 stake storage box, closed at the sides, open at the top, below the loading area, doors on both sides, W=450 mm/H=400/420 mm/D=2460 mm 6 pairs of extendable stake pockets for square tube stanchions 80x80 mm, extendable from loading width 2000 mm to 3100 mm Cjdpfx Alsi Ri Szsdjrb 4 pairs of stake pockets recessed in the outer frame for square tube stanchions 80x80 mm 11 stake pockets centrally recessed in the floor for square tube stanchions 80x80 mm, with reinforcement beams, installed between the outer stake pockets 5 x 3 pairs of stake pockets on the outer longitudinal beams for square tube stanchions 80x80 mm, including reinforcement beams – for load securing to the front and rear during transport of reinforcing steel mesh, 2x5000 mm or 2x6000 mm 6 lightweight plug-in stanchions W=80/D=80 mm, usable height approx. 1850 mm, hot-dip galvanized, top with cable guides for strap tensioning 12 lightweight plug-in stanchions W=80/D=80 mm, usable height approx. 1850 mm, hot-dip galvanized with lashing rings welded to both sides at the bottom Note: Stake pockets/plug-in stanchions are not designed for sole securement of long materials, pipes, etc. without additional lashing 2 plastic tool boxes, with drawer and shelf, W=650/H=520/D=670 mm, lockable with a padlock (lock not included) 6 reinforcing steel winches with wire cable and counter hook, with cable feed-through in the outer frame, 1 removable plug-in gearbox for reinforcing steel winches supplied loose (without frame mounting) Telescoping Main frame telescopic, extendable by max. 4000 mm and lockable at approx. every 500 mm Locking with pneumatic bolt locking + frame locking indicator on both sides, operation via manual button, control for brake/locking and suspension on driver’s side, ahead of the axles Storage compartment between longitudinal beams when extended Axles & Suspension SAF disc brake axles with 430 mm disc diameter Rear axle is self-steering, with automatic reverse lock via reversing light, with additional lock function on the trailer via hand button, and manual override in the tractor unit (pin 10), no truck installation required. Offset axle spacing mm Air suspension 1st axle with automatic lift, also electrically controllable from the truck, with starting aid, no truck installation required (starting aid functional up to 30% axle overload and max. speed of 25 km/h) Brake System 2-line compressed air brake system Color-coded line routing for easy servicing Spring-actuated parking brake 2 error-proof coupling heads at the front, without connectio

Koşul: yeni, makine/araç numarası: 56c59c8aba35227ffb44c9f75, boş ağırlık: 11.350 kg, azami yük ağırlığı: 26.650 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Jumbo Chassis Semi-Trailer Steel welded construction with closely spaced cross members, reinforced design, low-loader outer frame profile, suitable for transporting construction machinery up to 32,000 kg and a maximum external machine width of 2550 mm, fifth wheel plate with interchangeable 2'' kingpins. Rear slant approx. 1200 mm at 7°. Enclosed upper ramp shaft with steel/tread plate. In the low-bed section, omega rail laterally below the outer frame serves as a hanging strip for tarpaulins and distance holders for the lashing mushrooms, not in the wheel area. For the lift table: an additional fixed lightweight outer frame with omega profile allows for the lift table to be raised with closed tarpaulin! 24 t, 2-speed landing gear with single-side operation, half-round base and straight mounting plate, with thrust compensation. Free swing radius to rear: approx. 1950 mm. Rear support foldable 2 wheel chocks with holders Side underrun protection made of aluminium Quarter-shell mudguards at front and rear of each axle Anti-spray flaps behind each axle Rear underrun protection made of steel Full-width spray flap across the rear 4 stainless steel toolboxes, w=800/h=350/d=350 mm, with polished doors, lockable; 2 each on FR-left and FR-right in front of the 1st axle Lift table after gooseneck, approx. 3000 mm long, hydraulically liftable for driving over the gooseneck, with mechanical locking in raised position (cylinder angled for good ground clearance, Fliegl standard). Controls on FR-right + additional operation via wireless remote control (same as ramp operation). Lift table can be raised with tarpaulin closed! Tarpaulin hanging on lift table area on an additional lightweight fixed outer frame with omega profile, lift table can be raised with closed tarpaulin! Lashing mushrooms remain usable even when table is lowered! Crjdpfx Aji Riw Asldob Lashing points Gooseneck: 4 pairs of 5 t lashing rings recessed into outer frame 2 pairs of lashing mushrooms, both above and on the sides, recessed into outer frame Low-bed: 8 pairs of lashing mushrooms, both top and side, recessed into outer frame, each 10 t 't 9 pairs of 5 t in outer frame Axles & Suspension SAF drum brake axles Last axle steered, with automatic reverse lock via reversing light, and additional lock feature on vehicle via hand button Air suspension with lift & lower valve + auto-reset function H & S function with quick venting 1st axle is an automatic lift axle, including forced lowering and starting aid, actuated by 3x braking (starting aid is functional up to 30% axle load exceedance and up to a max. speed of 25 km/h) Axle lift is below recommended driving height, therefore no guarantee for tire damage Wheels and Tyres 235 / 75 R 17.5 from leading manufacturers Steel twin wheels, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 tamper-proof coupling heads at front, no connecting line EBS, electronic braking system with EBS socket at front, no connecting cable Note: The trailer may only be towed by trucks that guarantee the effectiveness of the ABS! Axle load detection in the truck via EBS, without truck installation (no calibrated scale) Electrical System 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front, in LED 2 white/red lane marker lights at the rear 1 rotating beacon with holder, switchable via parking light (removable beacon) 2 pairs of warning signs, double LED illuminated and e

Koşul: yeni, makine/araç numarası: 207ad28f83705ed0d38a4f174, boş ağırlık: 3 kg, azami yük ağırlığı: 11 kg, toplam ağırlık: 14 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r17,5, Further information Chassis Swap Central Axle Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with robust outriggers for 20-foot swap bodies, suitable for swap bodies 7.15 and 7.45 rear-flush (for 7.15 swap bodies, not rear-flush; forklift pockets/frame protrudes) Telescopic support leg at the front 1 pair of gearbox support feet at the front, with straight lower part and single-sided operation on the right (FR) Wheel chocks with holder Aluminium side underrun protection Steel rear underrun guard Half-shell mudguards Mounting for truck-mounted forklift at the rear, incl. 2 fork insertion pockets, 2 extendable support tubes, bracket for chain securing with locking pin. Rear underrun guard with light unit can be folded away. Includes 2 loose rubber pads to protect the rear panel; we recommend counterweight! Note: Partially low ground clearance with forklift, poor trailing behaviour possible, no guarantee! (Forklift self-weight up to max. 1,500 kg for trailers.) (With proximity switch for forklift control in conjunction with lift axle) The forklift mounting shifts the axles rearwards, pay attention to load distribution when driving without a forklift. Customer risk! (For swap body trailers, driving with forklift is only permitted in conjunction with a swap body.) Forklift mount adapted as per AU 203670 for 7.45m swap bodies Counterweight at the front between the frames, approx. 300 kg, if required, exact check still pending Drawbar equipment for central axle trailers Drawbar with approved 50 mm towing eye, forwarding edition (not suitable for trucks with tail lift, exact check still required when ordering) Undercoupler drawbar Drawbar without length adjustment Axles + Suspension SAF drum brake axles as per manufacturer's choice Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Brake system 2-line compressed air brake system, colour-coded line routing for easier service Spring-loaded parking brake Duomatic connection at front, with connecting line to the tractor, on the left (FR) Duomatic connection at front, with connecting line to the tractor, connection on the right (FR) EBS, Electronic Braking System with EBS plug at the front, with connection cable, on the left (FR) Attention: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! With lift & lower valve, holding function in each lift/lower position Vehicle - Drive stability system Wheels and Tyres 235/75 R17.5, brand as per manufacturer's choice Crodpfsi Ri Iasx Aldeb Steel twin wheels, factory silver Electrics 24 Volt, 4 x 3-chamber tail lamps + 1 round reversing lamp + 1 round rear fog lamp, side yellow LED lighting, lights mounted protected! 2 white position lamps at the front 2 white/red lane marking lamps at the rear 1 x 15-pin connector at the front, with connecting cable, on the left (FR) 2 x 7-pin sockets at the rear left (FR) for truck-mounted forklift 1 x 15-pin socket at the rear left (FR) for truck-mounted forklift LED work lights on both sides behind the 2nd axle (switched via reverse light) Additional LED work light at rear, switched via reverse light Approval / Plates Germany With Dekra inspection and certificate (as per §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour markings with reflective tape as per ECE R 048, white on the sides and red at the rear Painting Frame DB

Koşul: yeni, makine/araç numarası: 06017a31026c05fc8f6ccf5ae, boş ağırlık: 3.055 kg, azami yük ağırlığı: 14.945 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r17,5, Further information Chassis: Swappable rotating dolly Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with robust outriggers on 20-ft base for swap bodies 7.15 and 7.45 Rotating dolly with heavy-duty ball bearing turntable 2 wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Quarter mudguards at the front and half-mudguards at the rear Drawbar device for dolly trailers Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Laser-measured axles/chassis for reduced tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake system, color-coded line routing for easy servicing Spring-loaded parking brake 2 foolproof coupling heads at the front, with connecting lines to the motor vehicle EBS, Electronic Braking System with EBS plug in front with connecting cable Note: The trailer may only be towed by towing vehicles that can ensure effective ABS operation! With raise & lower valve, holding function in both lower and raised positions Wheels and tires 235/75 R17.5 tires, brand at manufacturer's discretion Steel twin wheels, factory silver Electrics 24 volt, multi-chamber LED lights with resistor, yellow LED side marker lights, LED number plate light (Note: Certain towing vehicles may trigger false diagnostics despite proper functioning) 2 white front position lights in LED 2 white/red lane marker lights at rear in LED 1 x 15-pin plug at front with connecting cable Additional LED work light at the rear, switched via reverse light Approval / Plates Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Codpfji Ri Rcjx Alderb Paintwork Frame: DB 7350 Novagrau Note: Archive images!

Koşul: yeni, makine/araç numarası: c13a96854ea37997845c1bf36, boş ağırlık: 6.860 kg, azami yük ağırlığı: 28.140 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235/75 17,5,

Koşul: yeni, makine/araç numarası: d24246f092ae53c0e155d19dd, boş ağırlık: 2.400 kg, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 16.000 kg, Further information Chassis tandem trailer Steel welded construction with approx. 152 mm high floor section; load-oriented and torsion-resistant steel frame structure. Longitudinal floor beams with a load-resistant outer frame and a guide tunnel every 600 mm, tunnel with positioning aids at the top and sides; tunnel height approx. 45 mm. 4 interchangeable container corner fittings on 20ft basis. 4 jack legs for jumbo parking height 970 mm, extendable and foldable sideways by 90°, with short safety strut and securing mechanism, pin lock on the frame, sturdy spring bolt as additional transport lock, symmetrical arrangement of legs Form A 2 for CWB C 745 / 782, suitable for parking height approx. 970 mm. Reinforcement between support legs. 7 pairs of lashing rings recessed in the outer frame, each rated at 2.5 t. Heavy-duty pallet stops on both sides, approx. 20–25 mm high, lashing option every 200 mm, loading height reduced by approx. 20–25 mm. Side-mounted door retainers. Rear underrun protection made of flat steel. Flooring Phenolic resin-coated plywood panels, approx. 27 or 30 mm thick (manufacturer's choice), designed for high point load capacity, suitable for forklift axle loads up to max. 4,400 kg. Front bulkhead/corner posts 2,800 mm high, remaining section covered with tarpaulin; volume-optimized steel corner posts; quick-release device for side curtain at front bulkhead. Central stanchions 1 pair of sliding stanchions, adjustable along the full length, with four pockets for insert slats and long lower pocket. Insert slats 3 rows of aluminum V-insert slats or wooden insert slats as per manufacturer, plus 1 additional row of aluminum V-insert slats. Rear wall/corner posts rear Crjdpekt Ni Uofx Aldeb Rear steel corner posts up to underside of roof, curtain suspension with round tube and tensioning ratchet. Rear portal doors, double-wing, each with 2 internal locking rods. Curtain Tarpaulin with welded-in horizontal and vertical tension belts. Tension locks in stainless steel. Roof Sliding roof; rear Endlift, can be folded up high at the back, roof slides from rear to front; L-roof beam designed for the automotive industry; internal width between roof beams approx. 2,490 mm, curtain color: white. EcoLift – lifting roof, can be raised by approx. 380 mm, gas-strut assisted. Approval / Plates Country of registration: Germany. Manufacturer's certificate according to EN 12642 XL. Paintwork Chassis hot-dip galvanized. Front corner posts hot-dip galvanized. Front wall aluminum. Rear corner posts hot-dip galvanized. Rear wall white. Tarpaulin RAL 9005 jet black with advertising lettering. Attention! These are archive images.

Koşul: yeni, makine/araç numarası: 8df1ead53cc82aeb51e50a37d, boş ağırlık: 4 kg, azami yük ağırlığı: 13.880 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Turntable Skip Loader Fine-grain steel welded construction Container locking system: - 2 pairs of locking hooks recessed into the floor - Pneumatic operation The container locking system is designed as an internal 2-point mechanism; locking of skip containers with internal bars is not possible (designed for the transport of roll-off containers with subframes according to DIN 30722). Note! At the start of the roller trough at the front, the container must be pushed on completely flat! Longitudinal guide rails, laterally adjustable and removable, rails approx. 115 mm high Turntable with heavy-duty ball bearing slewing ring 8 pairs of lashing mushrooms recessed into the upper and side parts of the outer frame, each rated at 5 t 7 pairs of stake pockets recessed into the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t lashing rings, not included) 2 wheel chocks with holder Aluminium side underrun protection Steel rear underrun protection Quarter section mudguards according to EC standards With anti-spray mudflaps to EC Directive Drawbar arrangement for turntable trailers Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Wheels and Tires 235 / 75 R 17.5 Manufacturer’s choice Steel wheels in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 interchangeable coupling heads at front, with connecting lines to towing vehicle, ABS and ALB, with ABS socket at front, with connection cable Attention: The trailer may only be towed by tractors that ensure proper ABS function! Electrics 24 Volt, multi-chamber tail lights, yellow LED side marker lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin interchangeable plugs at front, with connecting cable Floor Steel floor Container roller trough at front, recessed in floor, for roll-off containers 5,000 – 7,000 mm length Note: Minor floor deformation due to welding distortion possible! Loading ramps Lockable storage space for loading ramps beneath bed Operating instructions For 10,000 kg axle loads, a special permit is required. The permit must be applied for separately in each federal state; there is no guarantee from the legislator for 20 t permissible total weight. Customer’s risk. The specified total weight is technically possible; depending on the type of load, the permissible total weight may not be achievable while adhering to axle/support and kingpin loads (impaired driving and tracking possible from poor load distribution). Country of registration / Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC-FGV) Crsdpfx Alsi Ri Nusdjb 24/7 Service Hotline Prepared for one-line number plate holder Contour marking with reflective tape to ECE R 048, white lateral and red rear Warning panel according to ECE-70 Paintwork Frame DB 7350 Nova Grey 15-year warranty against rust-through Note: Floor deformation from hot-dip galvanization possible! Drawbar KTL black Important: Archive photos!

Koşul: yeni, makine/araç numarası: 81b04fd2e28f354df79a4c3b3, boş ağırlık: 3 kg, azami yük ağırlığı: 14 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r17,5``, Further information Cedsi Riy Nepfx Alderb Chassis Swap Central Axle Trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear Locking folding adapter + height adjustment for parking height 1,000 - 1,120 mm, folding centre supports and re-mountable guide rollers upwards, 4 container locks with sturdy outriggers on 20-foot base for swap bodies 7.15 / 7.45 and 7.82 1 pair of gearbox support feet at the front, with straight lower section and single-side operation on FR right 2 wheel chocks with holders Side underrun protection aluminium Rear underrun protection steel Half-shell mudguards Drawbar arrangement for central axle trailer Drawbar with certified 50 mm towing eye, freight forwarding version (not suitable for trucks with tail lift, or subject to further inspection in case of order) Undermount drawbar, free drawbar length approx. 2200 mm Axles & Suspension SAF drum brake axles Axle/chassis laser alignment, reduces tyre wear and fuel consumption Air suspension Brake system 2-line compressed air brake system with colour-coded piping for easy servicing. Spring-loaded parking brake 2 misconnection-proof coupling heads at the front, with connection lines to the truck, connector at FR-right EBS, Electronic Brake System with EBS plug at front, with connection cable, connector at FR-right Note: The trailer must only be towed by vehicles which ensure ABS functionality! With raise/lower valve, with holding function in both lower and raise position Vehicle – Driving Stability System Wheels and tyres 235/75 R17.5'' tyres, manufacturer at discretion Steel twin wheels, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red outline marker lights at the rear 1 x 15-pin plug at the front, with connection cable, connector at FR-right 2 additional LED work lights at rear, switched via reversing light 1 LED work light front centre between the carriers, rear-facing, switched via reversing light Operating notes The stated total weight is technically feasible, depending on the load, the total weight may not be achievable within the permissible axle, support and kingpin loads. (Incorrect load distribution can result in poor driving and tracking behaviour) Registration country / Plates Germany With Dekra approval and inspection report (in accordance with §13 EC - FGV) 24/7 Service hotline Prepared for single-line license plate holder Warning plate in accordance with ECE - 70 Contour marking with reflective strips to ECE R 048, white on sides and red at rear Paint Frame in DB 7350 Novagrau, 10-year warranty against rust penetration Note: Archive images!