Açık yarı römork

FLIEGL Fliegl SZS 270 Mega Plateau

The images shown are archive photos! The vehicle may currently be in use!

2-axle flatbed semi-trailer
Type: SZS 270 Mega
RH 95

Weights and Dimensions:
Permissible/technical gross weight: 27,000 kg
Permissible/technical payload approx.: 23,000 kg
Permissible/technical axle load: 16,000 kg
Permissible/technical king pin load: 11,000 kg
Unladen weight approx.: 4,000 kg +/- build tolerance

Overall length approx.: 13,850 mm
Overall width max.: 2,550 mm
Overall height approx.: 2,220 mm
Platform length approx.: 13,650 mm
Platform width approx.: 2,480 mm
Coupling height approx.: 950 mm
King pin mounting dimension approx.: 1,680 mm
Front corner dimension approx.: 2,040 mm

Vehicle consists of:
Semi-trailer chassis for forwarding
Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin
Outer frame with "Load-Lock profile" for lashing strap attachment. Note: In order to attach straps when using sideboards, the sideboards must be opened.
14 pairs of lashing rings, each rated at 2.5 t
24 t, 2-speed landing gear, single-side operation, with straight base section, without shift compensation
Without landing legs
Wheel chocks with holders
Aluminum side underrun protection
Steel rear underrun protection
Quarter-shell mudguards

Gbjdpfx Aaoy Rxmwe Nol
Axles & Suspension:
SAF disc brake axles
Air suspension

Brake System:
2-line compressed air brake system
Spring-loaded parking brake
2 interchangeable coupling heads at the front (without connector hose)
EBS (Electronic Braking System) with EBS socket at front, without connecting cable
Note: The trailer may only be towed by towing vehicles which ensure the functionality of ABS!
With lift & lower valve
Vehicle stability control system

Wheels and Tyres:
385/55 R19.5", manufacturer at OEM's discretion
Steel rims, factory silver

Electrical System:
24 Volt, multi-chamber lights, yellow LED side marker lighting
2 white position lights at the front, protected by round bar
2 red/white lane marker lights at the rear
2 x 7-pin interchangeable sockets at front (without connecting cable)

Floor:
Approx. 30 mm phenolic-coated plywood panels, with transverse joints featuring omega-section inserts, mounted on longitudinal beams for high point load capacity, suitable for forklift axle load up to max. 7,100 kg
Note: Floor swelling due to weather influences possible.

Front Wall/Front Corner Posts:
25 mm aluminum hollow section, approx. 1,350 mm high, steel volume-design corner posts with access holes for forklift drivers

Approval / Certificates:
Germany
With Dekra inspection and certification
24/7 Service Hotline
Pre-equipped for single-line license plate holder
Warning panel to ECE-70 standard
Contour marking with reflective strips as per ECE R 048, white on the sides and red at the rear

Paintwork:
Chassis: RAL 3002 carmine red
Landing feet: black coated

The images shown are archive photos! The vehicle may currently be in use!

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.