Kullanılmış Fliegl Tps 118 Bau 5,2M M. Heckan satın al (44.371)

Koşul: yeni, makine/araç numarası: a3b1347da4aa7f31dceb875db, boş ağırlık: 2 kg, azami yük ağırlığı: 9 kg, toplam ağırlık: 11 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Central axle trailer Fine-grain steel welded construction 6 pairs of lashing eyes bolted to the floor/outer frame, each rated for 5 tons Gear support leg at front Foldable rear support 2 wheel chocks with holders Steel underrun protection Full-width rear spray flaps Quarter-shell mudguards Central axle trailer drawbar Drawbar with certified 40 mm draw eye Drawbar height adjustable by spindle, max. adjustment range 300 mm Axles & Suspension BPW drum brake axles Axles/chassis laser-measured to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker balance) Wheels and Tires 235/75 R 17.5 Manufacturer's choice Steel rims, factory silver Brake System 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at front with connections to the towing vehicle ABS and ALB, with ABS connector at front, incl. connection cable Csdpfx Aji Ri Ilsldogt Attention: The trailer may only be towed by traction vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, side LED marker lights (amber) 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable plugs at front, with connecting cables Floor Steel / checker plate for high point load capacity Note: Slight floor warping possible due to welding distortion! Platform length approx. 5,200 mm Rear taper approx. 900 mm Front wall / corner stanchions 25 mm aluminium hollow section, 320 mm high Side walls 25 mm aluminium hollow section, 320 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions fixed to the frame with bracket for securing the loading ramps, drive-on width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with carry handles Wooden surface With gas strut for one-man operation Operating Instructions The specified gross weight is technically possible; depending on the load, the gross weight may not be achievable due to permitted axle, support, and kingpin loads (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of registration / Plates Country of registration: Germany With Dekra inspection and appraisal (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective strips according to ECE R 048, side white and rear red Paintwork Frame DB 7350 Novagrau 10-year warranty against rust-through Front wall aluminium Sidewalls aluminium, anodised Loading ramps hot-dip galvanised Note: Archive images!

Koşul: yeni, makine/araç numarası: ebf3f771e96394cd89e56bbb7, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Central Axle Trailer Fine-grained steel welded construction 6 pairs of lashing eyes bolted to the exterior floor/frame, each rated at 5t 2 additional pairs of lashing eyes bolted to the floor in the corners, each rated at 5t Front support leg, gearbox type Foldable rear support 2 wheel chocks with holders Steel underrun protection Full-width rear mud flaps Quarter mudguards 1 plastic toolbox with shelf, dimensions b=620/h=360/d=440 mm, lockable with a padlock (padlock not included) Drawbar Central Axle Trailer Drawbar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles & Suspension Drum brake axles as per manufacturer's specification Axle/chassis laser alignment for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (balancing rocker) Wheels and Tyres 235 / 75 R 17.5 as per manufacturer's specification Factory silver steel rims Brake System 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at front with connecting lines to the tractor ABS and ALB, with ABS socket at the front and connecting cable Cgjdpfx Alji Rixrsdot Electrics 24 Volts, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, with connecting cable Floor Steel chequered plate floor for high point load capacity Note: Slight floor undulation due to welding distortion possible! Platform length approx. 5,200 mm Rear taper approx. 900 mm Front wall / corner posts 25 mm aluminium hollow profile, 400 mm high Side walls 25 mm aluminium hollow profile, 400 mm high, foldable and removable Rear wall / rear corner posts 1 pair steel posts fixed to the frame with holders to secure loading ramps, clear entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with hand grip on ramps Surfaced with 3 serrated steel tracks Gas strut support for single person operation Registration Country/ Plates Registration country: Germany 24/7 service hotline Prepared for single-line licence plate holder Contour marking with reflective tape as per ECE R 048, white at the sides and red at the rear Paintwork Frame hot-dip galvanised including passivation 15-year warranty against rust-through Front wall aluminium Side wall aluminium anodised Loading ramps hot-dip galvanised Note: These are archive images.

Koşul: yeni, azami yük ağırlığı: 8.840 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Overall length: 8,000 mm Loading length: 6,200 mm incl. rear incline Further information plus preliminary freight / provision ex warehouse 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: Central axle trailer Fine-grain steel welded construction Outer frame with slight slope, new design with 'Load-Lock profile' for lashing strap attachment Pair of lashing eyes outside in the floor, each rated at 5t 1x at the front corners, 1x before and 1x in the rear incline at the back 6 pairs of lashing eyes outside in the floor/outer frame, each 5t Support jack at the front Foldable rear support Wheel chocks with holder Aluminium side underrun protection Galvanised steel rear underrun protection Full-width rear splash guards (not in combination with forklift holder) Quarter shell mudguards 1 plastic toolbox, W=600 / H=425 / D=460 mm, lockable Central axle trailer drawbar system Drawbar with tested 40 mm towing eye Codpfx Aloyl E Dqjdegt Drawbar height adjustable by spindle, max adjustment range 300 mm Axles & Suspension GFA or BPW axles as per manufacturer’s selection, with tapered roller bearings and S-cam brake 'Axles/chassis laser-measured': reduces tyre wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber mounting and mechanical axle load equalisation (rocker compensation) Brake system 2-line compressed air braking system Coloured line routing for easy service Hand spindle parking brake 2 non-interchangeable coupling heads at front, with connecting lines to tractor unit, 24 volt ABS and ALB, ABS plug at front, with connecting cable, Note: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! Wheels and Tyres 235/75 R17.5, brand as per manufacturer’s selection Steel rims, factory silver Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white marker lights at front in LED 2 white/red lane marker lights at rear 2x 7-pin non-interchangeable connectors at the front, with connecting cable Floor Steel/chequer plate floor for high point loading capacity Note: slight floor waviness due to welding distortion possible! Platform length approx. 6,200 mm Rear incline approx. 900 mm Front wall / front corner posts 25 mm aluminium hollow section, 400 mm high Side walls 25 mm aluminium hollow section, 400 mm high, foldable and removable Centre posts Without centre posts Rear wall / rear corner posts 1 pair of steel posts fixed to the frame with bracket for securing loading ramps, entry width approx. 2,430 mm Ramps Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable with hand grip on ramps with wooden covering (tip area with steel/chequer plate) with gas strut for single-person operation Operating notes The stated gross weight is technically feasible; depending on the load, the gross weight may not be achievable within the permitted axle, support, and kingpin loads. (Poor driving and tracking behaviour due to incorrect load distribution possible.) Country of Registration / Plates Germany with Dekra inspection and certificate (per §13 EG - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape to ECE R 048, side white and rear red Painting Frame DB 7350 Novagrau Front wall aluminium Side wall aluminium anodized Loading ramps hot-dip galvanised

Koşul: yeni, azami yük ağırlığı: 8.840 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New Fliegl Tandem Low Loader with Ramps, Type TPS 118 Chassis fully hot-dip galvanized – side walls aluminum Vehicle in ongoing production – delivery time approx. two weeks Gross weight: 11,800 kg Unladen weight: 2,960 kg Payload: 8,840 kg Overall length: 8,000 mm Loading length: 6,200 mm including rear slope Width: 2,550 mm Loading height: 900 mm Further Information plus pre-transport / provisioning ex stock location 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: central axle trailer High-tensile steel welded construction Outer frame slightly angled, new design with "Load-Lock profile" for attaching lashing straps 3 pairs of lashing rings (external, in floor), each 5 t 1 in front corners, 1 at and 1 within the rear slope Pair of lashing rings (external in the floor/outer frame), each 5 t Support leg at the front Foldable rear supports 2 wheel chocks with holders Side underrun protection, aluminum Rear underrun protection, galvanized steel Full-width rear mudflap (not in combination with forklift holder) Partial round fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Towing equipment: central axle trailer Drawbar with tested 40 mm towing eye Drawbar height adjustable by spindle, max adjustment range 300 mm Axles & Suspension GFA axles with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load balancing (rocker equalization) Brake system Two-line compressed air braking system Color-coded piping for easier servicing Manual spindle parking brake 2 non-interchangeable coupling heads at front, with connecting lines to the towing vehicle 24 Volt ABS and ALB, with ABS plug at the front and connection cable Cjdjv E Dqlepfx Aldegt Note: The trailer must only be towed by vehicles that ensure the effectiveness of the ABS! Wheels and Tires 4 x 235/75 R17.5, brand at manufacturer’s discretion 4 steel rims, factory silver Electrics 24 Volt, multi-chamber lighting, lateral yellow LED lighting 2 white front position lights in LED 2 white/red marker lights at rear 2 x 7-pin non-interchangeable plugs at front, with connecting cable Floor Steel/chequer plate flooring for high point load tolerance Note: Slight floor undulation due to welding distortion possible! Platform length approx. 6,200 mm Rear inclination approx. 900 mm Front wall/corner stanchions 25 mm aluminum box section, 400 mm high Side walls 25 mm aluminum box section, 400 mm high, foldable and removable Middle stanchions 1 pair folding stanchions, sidewall height, foldable and removable Rear wall/rear corner stanchions 1 pair steel stanchions attached to frame, with holders for securing the ramps Entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with grab handle on ramps wooden covering (tip area with steel/chequer plate) gas spring assisted for single-person operation Paintwork Chassis hot-dip galvanized including passivation “15 years warranty against rust-through” Front wall painted RAL 9006 White Aluminum Drop sides painted RAL 9006 White Aluminum Loading ramps hot-dip galvanized Finance lease offer: 48 months term, down payment only VAT, residual value 40%, monthly installment EUR 350.00

Koşul: yeni, azami yük ağırlığı: 8.665 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 910 mm, toplam genişlik: 2.550 mm, NEW VEHICLE Fliegl Tandem Timber Transport Trailer with Stanchions, Type TPS 118 Holz Total weight: 11,800 kg Unladen weight: 3,135 kg Payload: 8,665 kg Overall length: 8,350 mm Loading length: 6,200 mm Width: 2,550 mm Loading height: 910 mm Additional Information + Pre-transport / provision from logistics location 26639 Wiesmoor €1,280.00 / net Loading width: 2,480 mm Chassis: Central axle trailer Fine-grained steel welded construction Outer frame slightly angled with 'Load-Lock Profile' for securing lashing straps Gear support foot at the front Foldable rear support 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Open compartment for stanchions under the loading area 4 pairs of stanchion pockets recessed in the external frame, 83 x 83 mm internal dimensions 4 stanchion pockets centrally recessed in the floor with reinforcements to the main frame, 83 x 83 mm internal dimensions 6 pairs of removable stanchions W=80 / D=80 / L=2,000 mm, hot-dip galvanized Note: Stanchion sockets/inset stanchions are not designed for the sole load securing of long materials, pipes, etc., without lashing Aluminum side underrun protection Tandem trailer tow bar assembly Drawbar with certified 40 mm towing eye Drawbar length mechanically adjustable by 4 x 500 mm increments from 1,800 - 3,800 mm, set at 1,800 mm (Note: Observe load distribution and drawbar load) Axles & Suspension GFA or BPW axles, manufacturer’s choice, with tapered roller bearings and S-cam brakes "Axle/Running gear laser-measured" for reduced tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalization) Wheels and Tires 235 / 75 R 17.5" Steel rims, factory silver Braking System 2-line air brake system Spring-loaded parking brake Integrated air tank 2 fool-proof coupling heads at the front, with connecting hoses to the truck, ABS and ALB, ABS socket at the front, with connecting cable Attention: The trailer must only be towed by towing vehicles guaranteeing full ABS functionality! Electrics 24 Volt, multi-chamber LED rear lights, yellow LED side marker lights, LED number plate lighting (Note: depending on towing vehicle, possible diagnostic errors may occur despite full functionality) 2 white position lights at the front (LED) 2 white/red lane lights at the rear (LED) 2 x 7-pin fool-proof plugs at the front with connecting cables Floor Phenolic plywood approx. 30 mm thick for high point-load capacity Note: Floor deformation due to weather influences possible! Platform length approx. 6,200 mm Operating Instructions The stated total weight is technically possible; depending on cargo, the total weight might not be achievable within permissible axle, support, and fifth-wheel loads. Special permit required if the overall towing length exceeds 18,750 mm. Observe country-specific registration regulations. Registration / Plates Csdpfx Aew N U I Hsldegt Registration country: Germany With Dekra inspection and certificate 24/7-Service hotline Prepared for single-line number plate holder Contour markings with reflective strips per ECE R 048, white on sides, red at rear Paintwork Chassis hot-dip galvanized incl. passivation "15-year warranty against rust-through" Note: Floor warping due to galvanizing possible! Vehicle is from ongoing production – delivery time approx. 2–3 weeks.

Koşul: yeni, azami yük ağırlığı: 10.600 kg, toplam ağırlık: 14.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Vehicle / Body: Tandem trailer First registration: New vehicle Gross weight: 14,000 kg Unladen weight: 3,400 kg Payload: 10,600 kg Overall length: 8,080 mm Loading length: 6,200 mm including rear bevel Width: 2,550 mm Loading height: 900 mm Further information plus freight / provision from stock 26639 Wiesmoor €1,280.00 / net - Platform width approx.: 2,480 mm - Drawbar length approx.: 1,750 mm Vehicle consisting of: Central axle trailer chassis Fine-grain steel welded construction Outer frame slightly sloped, new version with "Load-Lock profile" for lashing strap attachment 6 pairs of lashing rings outside in floor/outer frame, each 5t 3 pairs of lashing rings outside in floor, each 5t 1 x front in the corners, 1 x before and 1 x in the rear bevel at the back Gear support leg at front Foldable rear supports Wheel chocks with holder Steel underrun protection Full-width rear mudflap (not in combination with forklift holder) Quarter-shell mudguards 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Towing device for central axle trailer Drawbar with certified 40 mm eye Height adjustable drawbar via spindle, max adjustment range 250 mm Axles & Suspension Cedoy Dzk Sopfx Aldogt Drum brake axles, manufacturer’s choice "Axles/chassis laser-aligned" to reduce tyre wear and fuel consumption Air suspension with raise & lower valve Wheels & Tyres 235 / 75 R 17.5" manufacturer’s choice Steel twin rims, factory silver Brake system 2-line compressed air brake system Spring loaded parking brake 2 non-interchangeable coupling heads at the front with connection lines to the towing vehicle, 24 Volt EBS, electronic braking system with EBS socket at front and connecting cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable plugs at front, with connection cable, Floor Steel/ribbed plate floor for high point load resistance Note: slight floor unevenness possible due to welding distortion! Platform length approx. 6,200 mm Rear bevel approx. 900 mm Front wall / corner stanchions at front 25 mm aluminium hollow profile, 400 mm high Side walls 25 mm aluminium hollow profile, 400 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions fixed to frame with bracket for securing ramps, entry width approx. 2,430 mm Loading ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with hand grip on ramps with wooden covering (front section with steel/ribbed plate) with gas strut for one-person operation Operating notes The stated gross weight is technically possible; depending on the load, the gross weight may not be achieved while complying with permitted axle, nose, and fifth wheel loads. (Poor driving and trailing behavior due to incorrect load distribution possible) Special permit required for trailer train length exceeding 18,750 mm. Observe country-specific registration regulations. Country of registration / plates Country of registration: Germany with Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline prepared for single-line number plate holder Contour marking with reflective strips acc. ECE R 048, white on sides, red at rear Paintwork Frame DB 7350 Novagrau "10-year anti-perforation warranty" Front wall aluminium Side wall anodized aluminium Ramps hot-dip galvanized

Koşul: yeni, makine/araç numarası: e77e603e96d0ea4194a7f7661, boş ağırlık: 3.000 kg, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Central Axle Trailer Fine-grained steel welded construction 5 pairs of lashing eyes bolted to the outer floor/frame, each rated 3t 2 additional pairs of lashing eyes bolted to the floor in the corners, each rated 5t Gear support foot at the front Rear support foldable 2 wheel chocks with holders Galvanized steel underrun protection Full-width rear mudflap Quarter-shell mudguards Drawbar for Central Axle Trailer Drawbar with certified 40mm towing eye Cgodpfoi Riv Tjx Aldst Drawbar height adjustable via spindle, max. adjustment range 250mm Axles & Suspension GFA or BPW drum brake axles Axles/chassis laser-measured to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load balancing (rocker balance) Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Factory silver steel rims Braking System 2-line pneumatic braking system Mechanical parking brake with hand spindle Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS connector at the front and connecting cable Note: The trailer must only be towed by vehicles that ensure proper ABS functionality! Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2x 7-pin non-interchangeable plugs at the front, with connecting cable Floor Steel / tread plate floor for high point load capacity Note: Slight floor warping due to welding distortion possible! Platform length approx. 5,200 mm Front wall / corner posts 25 mm aluminum hollow profile, 320 mm high, corner posts made of steel in volume design Side boards (drop sides) 25 mm aluminum hollow profile, 320 mm high, foldable and removable, divided by 1 pair of plug-in center stanchions Rear wall / corner posts at rear 1 pair of steel stanchions mounted on the frame and with holders for securing the loading ramps, entry width approx. 2,430 mm Loading Ramps 2 steel ramps, 3,100 mm long, 510 mm wide, split lengthwise, laterally adjustable with hand grip on ramps Wood covering With gas struts for single-person operation Operating Instructions The stated gross weight is technically achievable; depending on the load, the gross weight cannot be reached when adhering to the permissible axle, support, and kingpin loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7-service hotline Prepared for single-line license plate holders Contour marking with reflective strips according to ECE R 048, side white and rear red Paint Frame: DB 7350 Nova Grey, 10-year warranty against rust-through Front wall/side walls aluminum anodized, center stanchion DB 7350 Nova Grey Ramps hot-dip galvanized Note: Archive images!

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 3 kg, azami yük ağırlığı: 8 kg, toplam ağırlık: 11 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, The images are archive images. Further Information: Chassis Central Axle Trailer Fine-grained steel welded construction Outer frame slightly sloped with Load-Lock profile for lashing strap attachment Note: To attach the straps in combination with side walls, the side walls must be opened! Gear support leg at the front Foldable rear support 2 wheel chocks with holders Galvanized steel underrun protection Quarter-shell mudguards 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with a padlock (padlock not included) 1 storage compartment for plug-in stakes, open, below loading area 4 pairs of stake pockets recessed in the outer frame, internal dimensions 83 x 83 mm 4 stake pockets centrally embedded in the floor, reinforced to the main frame, 83 x 83 mm internal dimensions 6 pairs of plug-in stakes B=80/ D=80/ L=2000 mm, hot-dip galvanized Note: Stake pockets / plug-in stakes are not intended for the sole securing of long goods, pipes, etc. without lashing around them Drawbar Equipment Tandem Trailer Drawbar with certified 40 mm towing eye Drawbar mechanically length-adjustable by 4 x 500 mm from 1800 - 3800 mm, drawbar set to 1800 mm, (Note: Observe load distribution and support load) Axles + Suspension GFA axles with tapered roller bearings and S-cam brakes Axles / chassis laser aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load compensation (rocker compensation) Wheels & Tyres 235 / 75 R 17.5, manufacturer’s choice Steel rims, factory silver Braking System 2-line compressed air brake system Spring-loaded parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting lines to the truck, ABS and ALB, with ABS connector at the front and connection cable Attention: The trailer may only be towed by towing vehicles that ensure effective ABS operation! Electrics 24 Volts, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red outline marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cables Floor Phenolic coated plywood panels approx. 30 mm thick, for high point load capacity Note: Floor deformation due to weather conditions possible! Platform length approx. 6,200 mm Operating Instructions The stated total weight is technically possible; depending on the cargo, the total weight may not be achievable while observing the permissible axle, support and kingpin loads. Registration / Plates Country of registration: Germany With Dekra approval and report Cgedpfx Aji Ri H Djldet 24/7 service hotline Prepared for single-line license plate holders Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paint Frame DB 7350 Nova Grey Attention: Archive images!

Koşul: yeni, azami yük ağırlığı: 8.220 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.790 mm, NEW VEHICLE Fliegl Tandem Sliding Curtain Throughloader Tandem Through-loading system with front portal doors Cgjdpfop N Ib Njx Aldot Drive-over flap 2,400 mm wide and 350 mm long Gross weight 11,800 kg Payload 8,220 kg Unladen weight 3,580 kg Overall length 9,450 mm Load length 7,300 mm Load width 2,480 mm Internal height 2,790 mm Loading height 1,000 mm Outer frame with LOAD LOCK profile Foldable rear support legs 40 mm towing eye Length-adjustable drawbar from 1,950 mm to 2,300 mm Air suspension with lift and lower valve Plus pre-carriage / provisioning fee ex stock Wiesmoor EUR 1,280.00 net Lease purchase offer: Term 48 months, residual value 40%, down payment only VAT, monthly installment EUR 519.00 net Vehicle available at short notice from current production. Curtain colour still partly selectable.

Koşul: ikinci el, boş ağırlık: 3.500 kg, azami yük ağırlığı: 8.300 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2009, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.440 mm, yükleme alanı yüksekliği: 3.000 mm, süspansiyon: hava, lastik boyutu: 235/75R17,5, renk: beyaz, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden. Curtain-sided body and tarpaulin, 2 axles, tandem, air suspension, lift and lower function, ABS (anti-lock braking system), Edscha sliding roof, lashing eyes, underrun protection, front support, rear support, height-adjustable drawbar. Body: Flatbed + curtain trailer for glass transport with Edscha roof. Tyres approx. 50% tread remaining. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted. Cgjdpfxsi Rpx Ne Aldjt

Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT21201011556, boş ağırlık: 3.300 kg, azami yük ağırlığı: 8.200 kg, toplam ağırlık: 11.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 450 mm, süspansiyon: çelik, lastik boyutu: 235/75 r17,5, renk: kırmızı, The images are archive photos; the vehicle may still be in use! Further Information: - Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tipping bearing Cgedpslhpzvjfx Aldjt - Gear support foot at the front, foldable rear support, 2 wheel chocks with holder, steel underride guard, mudflap across full rear width, quarter shell fenders, spare wheel (same make as main tyres), steel rim, loose, 1 plastic toolbox with removable shelf (dimensions: w=620/h=360/d=440 mm), lockable with padlock (padlock not included). Note: In the folded-down position, the sideboard touches the storage box. - Lockable storage compartment for loading ramps beneath the cargo bed, 1 pair of aluminum ramps, length 3,000 mm, width 360 mm, load capacity per pair 8,000 kg (ramp mounting rail at rear) - Drawbar with certified 40 mm towing eye, height-adjustable via spindle, max. adjustment range 300 mm - BPW drum brake axles, axles/chassis laser-aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bushings and mechanical load equalization (rocker balancing) - 2-line compressed air braking system, color-coded lines for easy servicing. - Hand spindle parking brake, integral air reservoir, ABS and ALB, with ABS socket at front, complete with connecting cable. Note: The trailer may only be towed by vehicles capable of supporting ABS functionality. 2 non-interchangeable coupling heads at the front, with connecting hoses to the tow vehicle. - 24 volts, multi-chamber lights, yellow LED side lighting, 2 white position lights at the front - 2 white/red marker lights at the rear, two 7-pin non-interchangeable sockets at the front, with connecting cable - Three-way tipper body, hydraulic multi-piston press with lift limiter and safety cable, low-pressure cylinder up to max. 170 bar, without throttle (to be retrofitted to the truck if required). Hydraulic connection SVK coupling NW 10/3 with hose included - Actuation hydraulically via truck PTO - Robust tipping platform with 4 mm steel floor plate, steel sideboard construction, continuous sides, fold-down and swing-mounted with lower central locking. Removable rear corner posts. Rear wall fold-down and swing-mounted with lower central locking. - Platform length approx. 5,000 mm, side walls with 6 lower hinges, platform width 2,420 mm - 5 pairs of lashing rings in the floor, each rated at 5 tons Country of registration: Germany, with Dekra inspection and certificate (as per §13 EC-FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective tape according to ECE R 048 (white on the side, red at rear)

Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT21201012268, boş ağırlık: 3.240 kg, azami yük ağırlığı: 8.560 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2022, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, lastik boyutu: 235/75 r17,5, renk: yeşil, işletme ağırlığı: 3.240 kg, Further information Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tip bearing, gearbox support foot at the front, foldable rear support, wheel chocks with holders, steel underrun protection, rear mudflap covering the full width (not available with forklift holder), quarter shell mudguards, spare wheel, same brand as main tyres, steel rim, loose, plastic toolbox with shelf, width=620 mm / height=360 mm / depth=440 mm, lockable with padlock (lock not included). Note: Dropside contacts the storage box when folded down, lockable storage compartment for loading ramps underneath the loading area, pair of aluminium ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg (mounting rail for ramps at the rear). Cgjdpfx Alsk E Tdasdst Drawbar with certified 40 mm towing eye, height adjustable via spindle, max. adjustment range 300 mm BPW drum brake axles, axles/chassis laser aligned to reduce tyre wear and fuel consumption, parabolic suspension with maintenance-free steel/rubber bearings and mechanical axle-load compensation (rocker balancing) 2-line compressed air brake system, colour-coded piping for easy servicing, manual spindle parking brake. Integral air reservoir, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be towed by tractors that guarantee the effectiveness of the ABS. Duomatic coupling at the front, with connecting line to the tractor unit. 24 Volt, multi-chamber lights, side marker LEDs in yellow, 2 white position lights at the front, 2 white/red track markers at the rear, 1 x 15-pin plug at the front, with connecting cable. Three-way tipper system, hydraulic multi-piston press with stroke limiter and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, throttle to be retrofitted on the truck. Hydraulic connection with SVK connector NW 10/3, including connecting hose; operation hydraulically via truck PTO. Sturdy tipping platform with 4 mm steel plate floor, steel dropside body, continuous sidewalls, foldable and pendulum-mounted with central bottom lock. Removable rear corner posts. Tailboard foldable and pendulum-mounted, with central bottom lock, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Dropside return springs (not available with split sidewalls), platform width 2,420 mm, pair of lashing eyes in the floor, each rated at 5 tonnes. Operating instructions: The stated gross weight is technically possible; depending on the load, the gross weight may not be achieved while complying with permissible axle, support, and kingpin loads. (Poor driving and trailing behavior possible due to improper load distribution) Country of registration: Germany, with Dekra inspection and certificate (according to §13 EG-FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear.

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2020, Donanım: ABS, = Ekstra seçenekler ve donanımlar = - Arka havalı süspansiyon - Ön havalı süspansiyon Codpfx Ajy Ada Tsldogt = Notlar = Araç ile ilgili sorularınız için Bay Seidel size memnuniyetle yardımcı olur (Tel.). Fliegl TPS 119 platform Havalı süspansiyon, 40’lık çekme halkası, Duomatic, GFA akslar, Knorr ABS, yaylı fren, rampa, azami toplam ağırlık: 11.900 kg, boş ağırlık: 3.250 kg, taşıma kapasitesi: 8.650 kg, yükleme alanı ölçüleri: U 6.200 mm G 2.490 mm Y 380 mm, lastik diş derinliği: 1. aks 10 mm, 2. aks 10 mm Talebiniz üzerine size bir leasing veya finansman teklifi sunabiliriz. Bay Seidel (Tel.) memnuniyetle yardımcı olur. Daha fazla bilgi için web sitemizi ziyaret edin. ... Hatalar, değişiklikler ve ara satış hakkı saklıdır !!! - = Ek bilgiler = Boş ağırlık: 3.250 kg Taşıma kapasitesi: 8.650 kg Azami toplam ağırlık: 11.900 kg Yükleme alanı ölçüleri (UxGxY): 6.200x2.490x380 mm Son muayene: 2026-07 Daha fazla bilgi için Tobias Ebert ile iletişime geçin.

Koşul: ikinci el, makine/araç numarası: WFDFLT21801003760, boş ağırlık: 4.480 kg, azami yük ağırlığı: 13.520 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2014, lastik boyutu: 445/45 r19,5, Üretim yılı: 2014, Further Information Fine-grain steel welded construction 1 front gearbox support leg, with straight base and single-sided operation on the right in the direction of travel Wheel chocks with holder, aluminium side underrun protection, steel rear underrun protection Half-shell mudguards slightly protruding above the main frame, rear impact bumper Tandem trailer coupling device Drawbar with certified 50 mm towing eye, forwarding version, underslung drawbar Axles & Suspension BPW disc brake axles, manufacturer’s choice Air suspension with lift & lower valve Wheels and Tyres 445 / 45 R 19.5, manufacturer’s choice, steel rims in factory silver Brake System 2-line compressed air braking system Spring-loaded parking brake, Duomatic coupling in front, with connecting line to the towing vehicle, EBS, electronic braking system with EBS plug at the front, with connection cable Brand: Haldex Note: The trailer may only be towed by towing vehicles that ensure the ABS functions correctly! Floor: Platform length approx. 7,300 mm, anti-slip plywood floor Front wall: aluminium approx. 1,200 mm, corner posts in high-volume steel design Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Cgjdpfx Asni Udzsldot 2 white position lights at the front 2 white/red lane marking lights at the rear 1 x 15-pin socket at the front with connecting cable Approval / License Plates Country of approval: Germany, with Dekra inspection and certificate 24/7 service hotline, prepared for single-line number plate holder, contour marking with reflective tape in accordance with ECE R 048, white on the sides and red at the rear.

Koşul: ikinci el, makine/araç numarası: WFDFLT22001011091, boş ağırlık: 5.340 kg, azami yük ağırlığı: 12.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2021, lastik boyutu: 235/75 r17,5, Üretim yılı: 2021, Further information Chassis central axle trailer Fine-grain steel welded construction Type TPS 200 (special permit required) Gear support leg at front Rear support can be folded Wheel chocks with holders Side underrun protection made of aluminium Full-width rear mud flaps Mud flaps in front of each axle and anti-spray mud flaps behind each axle 1x spare wheel holder for 1 spare wheel, with wheel fixing kit 1x spare wheel, same make as standard tires, steel rim 1x stainless steel toolbox, w=600/h=400/d=500 mm, with polished lockable door Cgjdpep N Dgusfx Aldst Lashing points low loader 5 pairs of stake pockets recessed in the outer frame, inside 70 x 40 mm, (convertible to 5t lashing rings, not included) 7 pairs of lashing mushrooms recessed on the top and side of the outer frame, each rated at 10t 2 pairs of folding lashing rings additionally recessed in the low bed area, each 10t (1 pair at the front and 1 at the rear slope) Drawbar system for central axle trailer Drawbar with certified 50 mm towing eye Axles + Suspension SAF drum brake axles Laser-measured axles/chassis to reduce tire wear and fuel consumption Axle spacing 1810 mm (then 10t axle load technically permitted) Air suspension Braking system 2-line compressed air brake system, color-coded lines for easy servicing. Spring-loaded parking brake Duomatic coupling at front, with connecting line to tractor unit EBS electronic brake system with EBS connector at the front, including connection cable Note: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! With lift & lower valve Vehicle – driving stability system Axle load detection via EBS CAN bus signal, for display in the cabin, truck needs appropriate preparation, not installed in the truck (not a calibrated scale) Wheels and tires 235/75 R17.5, make: Fulda Steel rims, factory silver Electrics 24 volt, multi-chamber lights, yellow side LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 15-pin connector at front including connecting cable 1 additional LED work light at rear, switched via reverse light 1x LED beacon with bracket, powered by position light (removable beacon) Floor Subsequently finished with 70 mm softwood floor, wheel arch area with steel/chequer plate cover Rear incline with Mega Grip surface made from serrated grating Low bed area including rear incline 6500 mm Front wall / corner stanchions 25 mm aluminium hollow profile, 400 mm high, detachable Loading ramps Steel ramps 3600 mm long, 750 mm wide, split by cable tensioning, laterally adjustable Ramp displacement: min. spacing approx. 600 mm, max. outside width approx. 2880 mm Ramp surface with Mega Grip made from serrated grating Operated hydraulically by separate electrohydraulic unit, mounted in steel box, controlling located on right-hand side. Note: NATO socket with connection cable on truck required. Connection cable must not be connected while driving! Hydraulic lateral displacement of ramps, individually controllable (only in conjunction with hydraulic ramp actuation)

Koşul: yeni, azami yük ağırlığı: 8.580 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 950 mm, toplam genişlik: 2.550 mm, Further information plus freight/handling from warehouse location 26639 Wiesmoor €1,280.00 net Chassis central axle tipping trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical bearing Gear support leg at the front Foldable rear support 2 wheel chocks with holders Steel underrun protection Rear mud flaps across the full width (not available in conjunction with forklift holder) Quarter-shell mudguards 1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable (lock not included) Note! The drop side touches the storage box when folded down. Lockable storage compartment for loading ramps underneath the platform Central axle trailer coupling Drawbar with certified 40 mm towing eye Drawbar height-adjustable via spindle, maximum adjustment range 300 mm Axles + Suspension GFA or BPW axles at the manufacturer's discretion, with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker compensation) Wheels and Tires 235 / 75 R 17.5" as per manufacturer's choice Steel rims, factory silver Brake system 2-line compressed air brake system Color-coded line installation for easy servicing. Manual spindle-type parking brake 24V ABS and ALB, with ABS plug at the front, complete with connection cable, Attention: The trailer may only be towed by vehicles capable of supporting the ABS functionality! 2 foolproof coupling heads at the front, with connection lines to the towing vehicle Electrics 12 to 24 volt, multi-chamber LED lights, side yellow LED marker, LED license plate lighting (Note! With some towing vehicles, diagnostic errors may occur, even if function is given) 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin foolproof plugs at the front, with connection cable 1 additional LED work light at the rear, switched via reverse light Hydraulics Three-way tipping system, hydraulic multi-piston cylinder with lift limit and safety cable Low-pressure cylinder up to max. 170 bar, no flow restrictor. If required, this must be retrofitted to the truck. (Truck must have a maximum hydraulic flow rate of 55 l/min) Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Hydraulic operation via truck PTO Tipping platform Robust tipping bed with 4 mm steel plate floor, steel side panel assembly, continuous side panels, foldable and swinging, with central locking at the bottom. Rear stanchions plug-in. Rear wall foldable and swinging, with central locking at the bottom. Platform length approx. 5,000 mm, side panels with 6 hinges at the bottom. Side wall retraction springs (not available with fold-down front wall) Platform width 2,420 mm 3 pairs of lashing rings in the floor, each rated for 5 t Operating notes The indicated total permissible weight is technically feasible; depending on the load, the total permissible weight within the allowable axle/support/kingpin loads may not be achieved. (Poor driving or tracking behavior can result from incorrect load distribution) Country of registration/Number plates Country of registration: Germany With Dekra inspection and certificate (in accordance with §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Conspicuity marking with reflective strips according to ECE R 048, white on sides and red at rear Codpjy Dzlijfx Aldsgt Paint Frame hot-dip galvanized including pa

Koşul: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 950 mm, toplam genişlik: 2.550 mm, Further information plus pre-carriage / provision ex stock location 26639 Wiesmoor €1,280.00 / net Chassis Central Axle Tipper Trailer Steel welded construction, continuous tipping shaft at rear with 80 mm spherical bearing gear support leg at front foldable rear support 2 wheel chocks with holders Steel underrun protection Full-width rear spray flaps Quarter shell mudguards 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Note! Sideboard contacts the toolbox when folded down. Lockable storage space for loading ramps underneath the loading area Codpfey Dzlcex Aldsgt WITHOUT ramps towing equipment for central axle trailer drawbar with certified 40 mm towing eye drawbar height-adjustable via spindle, max. adjustment range 300 mm Axles & Suspension BPW drum brake axles "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5" manufacturer’s choice steel rims, factory silver Brake System 2-line air brake system colour-coded line routing for easy servicing manual spindle parking brake integral air reservoir ABS and ALB, with ABS connector at the front, with connection cable. Attention: The trailer may only be towed by vehicles which guarantee effective operation of the ABS! 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle Electrics 24 Volt, multi-chamber lamps, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cables Hydraulics three-way tipping system, hydraulic multi-piston ram with stroke limiter and safety cable low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this must be retrofitted on the lorry. hydraulic connection with SVK plug NW 10/3, incl. connecting hose hydraulic operation via truck PTO Tipping Platform Robust tipping platform with 4 mm steel floor, steel sideboard structure, continuous sidewalls, foldable not pendulum-mounted, without central locking below. Removable corner stanchions at the rear. Rear wall foldable and pendulum-mounted, central locking below. Loading platform length approx. 5,000 mm, sidewalls with 6 hinges at the bottom. Sideboard retraction springs (not possible with split sidewalls) Platform width 2,420 mm 5 pairs of lashing rings in the floor, each 5 tonnes Operating Instructions The stated gross weight is technically possible; depending on the load carried, the total weight may not be achievable in compliance with the permitted axle, support and kingpin loads. (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany with Dekra inspection and report (according to §13 EC Vehicle Approval Regulation) 24/7 service hotline prepared for one-line number plate holder Contour markings with reflective strips according to ECE R 048, sides white and rear red Paint Finish Frame hot-dip galvanised including passivation "15 years warranty against rust-through" sideboard/platform RAL 5002 ultramarine blue Note! Platform internally only primed if painted platform version ordered! Optional: Pair of ramps €1,280.00 / net

Koşul: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 950 mm, toplam genişlik: 2.550 mm, Further information plus pre-carriage / provisioning from warehouse location 26639 Wiesmoor €1,280.00 net Chassis Central Axle Tipper Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing support Front gearbox support leg Foldable rear support 2 wheel chocks with holders Steel underrun protection Full-width rear mud flaps Quarter-shell mudguards 1 plastic toolbox, W=600 / H=425 / D=460 mm, lockable Note! When folded down, the drop side contacts the toolbox. Lockable storage space for loading ramps below the loading platform Central axle trailer towing system Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles + suspension GFA drum brake axles "Axle/chassis laser aligned" to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load compensation (rocker equalization) Wheels and tyres 235 / 75 R 17.5" as per manufacturer’s choice Factory silver steel rims Brake system 2-line compressed air brake system Color-coded line routing for easy service. Manual spindle parking brake ABS and ALB, with ABS plug at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that ensure effective ABS functionality! 2 non-interchangeable coupling heads at the front, with connecting lines to the truck Electrics 24 volt, multi-chamber lights, yellow LED side marker lights 2 white front position lights 2 white/red lane departure lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable Hydraulics Three-way tipping system, hydraulic multi-piston press with stroke limiter and safety cable. Low-pressure cylinder up to max. 170 bar, without restrictor. If needed, must be retrofitted on the truck. Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Hydraulic operation via truck PTO Tipper bodies Robust tipping body with 4 mm steel sheet floor, steel side walls, sides continuous, foldable and pendulum-mounted with central locking at the bottom. Rear corner stanchions insertable. Tailgate foldable and pendulum-mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 bottom hinges. Drop side return springs (not available with split sides) Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated to 5 t Operating notes The stated gross weight is technically possible; depending on the load, the total weight may not be achievable within the permitted axle/support/king pin loads. (Poor driving and tracking behavior possible due to incorrect load distribution). Country of registration / signs Country of registration: Germany With Dekra inspection and expert report (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides, red at rear Paintwork Frame hot-dip galvanized incl. passivation "15 years warranty against perforation corrosion" Side walls / body RAL 9005 deep black Optional loading ramps €1,280.00 net Cgsdsy Dzk Ejpfx Aldet

Koşul: ikinci el, azami yük ağırlığı: 8.470 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2018, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 11.800 kg Boş ağırlık: 3.330 kg Yük kapasitesi: 8.470 kg Toplam uzunluk: 6.950 mm Yükleme uzunluğu: 5.000 mm Genişlik: 2.550 mm / Yükleme genişliği yaklaşık 2.420 mm Yükleme yüksekliği: yaklaşık 950 mm Diğer bilgiler - Ön destek ayağı Cgsdpfx Ajy Arkaoldot - Katlanabilir arka destek - 450 mm yan paneller - Büyük yük sabitleme paketi - Şase sıcak daldırma galvanizli ve pasifleştirilmiş - Opsiyonel yükleme rampaları: 1.280,00 €

Koşul: yeni, azami yük ağırlığı: 13.200 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.500 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.550 mm, Gross weight: 18,000kg / 21,000kg Unladen weight: 4,800kg Payload: 13,200kg / 16,200kg Overall length: 9,450mm Loading length: 7,500mm incl. rear bevel Width: 2,520mm Loading height: 860mm Additional information: - Frame painted in stock colour Nova grey - 70 mm wooden floor - Steel ramps, 2,800mm long x 750mm wide, laterally adjustable - With spring assist - Folding rear support - Aluminium side underrun protection Cgodor Da Uvspfx Aldot - Plastic toolbox - 3m widening package - Large lashing package – 5 pairs of flush-mounted ring lashing eyes in the outer frame (can be converted to stake pockets), each rated to 5t, 7 pairs of lashing mushrooms flush-mounted at the top and side of the outer frame, each rated to 10t - 50mm towing eye - Air suspension - Lift & lower valve - Axle load detection via EBS CAN bus signal - Tyres: 235/75R17.5 - 2 x 7-pin connectors at the front - LED beacon - 2 pairs of warning boards, double LED illuminated, extendable to 3m Plus delivery/hand-over ex stock location 26639 Wiesmoor €1,280.00 net

Koşul: ikinci el, boş ağırlık: 3.690 kg, azami yük ağırlığı: 9.810 kg, toplam ağırlık: 13.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2019, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.700 mm, yükleme alanı hacmi: 48 m³, süspansiyon: hava, lastik boyutu: 285/70R19,5 148J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 285/70R19,5 148J, arka lastik boyutu: 285/70R19,5 148J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Lashing eyes, -- Errors in printing, inaccuracies, and subject to change, Sample images --, More data at: !, More details: ! Cedpfxoy Hhzco Aldogt

Koşul: ikinci el, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 01/2018, Donanım: ABS, Besuchen Sie unsere Webseite, wo Sie unseren vollständigen Fahrzeugbestand mit vielen weiteren Fotos und Informationen in mehreren Sprachen finden. SEL 8382 Fliegl ZPS180 Baustofftransport / Alufelgen / 40 mm Deutsche Zulassung Erstzulassung: 25.01.2018 Techn. zulässiges Gesamtgewicht (kg): 18.000 Zulässiges Gesamtgewicht (kg): 18.000 Leergewicht (kg): 3.450 FIN: WFDFLT21801007501 HU (Hauptuntersuchung): 02.2026 / SP (Sicherheitsprüfung): 08.2026 BEREIFUNG UND ACHSEN: Bereifung: 385/65 R 22,5 Achskonfiguration: 2 Achsen / SAF Luftfederung Scheibenbremsen Alufelgen AUFBAU Innenmaße: Breite (m): 2,49 Länge (m): 6,90 Klappenhöhe (m): 1,00 FAHRZEUGUNTERLAGEN: Zulassungsbescheinigung Teil I (Fahrzeugschein) Zulassungsbescheinigung Teil II (Fahrzeugbrief) M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosanski) L. OBODYNSKA Ukrainisch, Russisch Wir sprechen: DEUTSCH, ENGLISCH, ITALIENISCH, SPANISCH, PORTUGIESISCH, UKRAINISCH, RUSSISCH, POLNISCH, BOSNISCH Trotz aller Sorgfalt bei der Erstellung der Informationen übernehmen wir keine Haftung für eventuelle Fehler oder Auslassungen. Wir bitten unsere Kunden, die verfügbaren Fotos sorgfältig zu prüfen. Die angegebenen Maße sind Circa-Werte. Csdpfxjx Tmzzs Aldsgt Unsere Fahrzeuge werden im vorhandenen Zustand verkauft. Wir laden unsere Kunden herzlich ein, unser Unternehmen zu besuchen und den Zustand des Fahrzeugs persönlich zu begutachten. Zudem bieten wir Ihnen die Möglichkeit einer Probefahrt. Bitte beachten Sie, dass die zum Fahrzeug gehörenden Batterien die aktuell verbauten sind. Für Informationen zu Neupreisen von Batterien stehen wir Ihnen gerne zur Verfügung.

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33802011324, boş ağırlık: 5.340 kg, azami yük ağırlığı: 29.660 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2021, yükleme alanı uzunluğu: 10.000 mm, süspansiyon: hava, lastik boyutu: 385 / 65 R 22,5", renk: gri, Üretim yılı: 2021, The images are archive photos; the vehicle may still be in use! Chassis: Semi-trailer for containers Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin 24 t, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight mounting plate, with sliding compensation, 2 wheel chocks with holders, aluminum side underrun protection, foldable steel rear underrun protection, half-shell mudguards with anti-spray flaps behind each axle 8 timber bolster frames (manufacturer's choice), each with 16 lashing eye-hook combinations, bolted to the frame, each with 2 telescopic timber stakes, extendable from approx. 2,000 to 2,800 mm, load capacity per pair 7 t Axles & Suspension SAF disc brake axles with 430 mm disc diameter, air suspension with raise & lower valve 1st axle automatic lift axle, additionally manually lowerable, can be operated via push button on the vehicle Wheels and Tires 385/65 R 22.5", Athos drop-forged steel rims, factory silver Braking system 2-line compressed air brake system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractors that ensure the ABS functions correctly! Vehicle Stability System, EBS 2S/2M Electrics 24 Volt, multi-chamber lights, side yellow LED lighting, 2 x 7-pin non-interchangeable sockets at the front, without connecting cable, 2 x reversing lights at the rear Front wall Steel/mesh front wall, approx. 2,300 mm high Cjdpfxewk Hcge Aldegt Approval / Plates Country of registration: Spain, type approval according to EC 2007/46, prepared for double single-line number plate holder 1 x plastic, 1 x stainless steel (interchangeable)

Koşul: yeni, makine/araç numarası: eca976917d325d4adc41b69e8, boş ağırlık: 7.200 kg, azami yük ağırlığı: 27.800 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r 22,5, Further information Chassis semi-trailer for freight forwarding High-strength fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2-inch kingpin, main frame reinforcement for 25 t at the center of gravity over 3 m loading length when retracted. 13 pairs of hooks for lashing strap attachment welded to the crossmembers 23 pairs of lashing rings recessed into the outer frame, each rated for 3.5 t Outer frame with load-lock profile for lashing strap attachment Note! Not usable with side walls! 24 t 2-speed landing gear in reinforced version for unhitching while loaded, single-sided operation, with semi-circular lower section and straight mounting plate, with thrust compensation Wheel chocks with holders Aluminum side underrun protection Rear underrun protection Half-shell mudguards With anti-spray mud flaps in accordance with EU regulations 1 spare wheel carrier for 1 spare wheel, with wheel fastening kit 1 stake storage box, closed at the sides, open at the top, below the loading area, doors on both sides, W=450 mm/H=400/420 mm/D=2460 mm 6 pairs of extendable stake pockets for square tube stanchions 80x80 mm, extendable from loading width 2000 mm to 3100 mm 4 pairs of stake pockets recessed in the outer frame for square tube stanchions 80x80 mm Cedpfoi Ri Szex Aldjgt 11 stake pockets centrally recessed in the floor for square tube stanchions 80x80 mm, with reinforcement beams, installed between the outer stake pockets 5 x 3 pairs of stake pockets on the outer longitudinal beams for square tube stanchions 80x80 mm, including reinforcement beams – for load securing to the front and rear during transport of reinforcing steel mesh, 2x5000 mm or 2x6000 mm 6 lightweight plug-in stanchions W=80/D=80 mm, usable height approx. 1850 mm, hot-dip galvanized, top with cable guides for strap tensioning 12 lightweight plug-in stanchions W=80/D=80 mm, usable height approx. 1850 mm, hot-dip galvanized with lashing rings welded to both sides at the bottom Note: Stake pockets/plug-in stanchions are not designed for sole securement of long materials, pipes, etc. without additional lashing 2 plastic tool boxes, with drawer and shelf, W=650/H=520/D=670 mm, lockable with a padlock (lock not included) 6 reinforcing steel winches with wire cable and counter hook, with cable feed-through in the outer frame, 1 removable plug-in gearbox for reinforcing steel winches supplied loose (without frame mounting) Telescoping Main frame telescopic, extendable by max. 4000 mm and lockable at approx. every 500 mm Locking with pneumatic bolt locking + frame locking indicator on both sides, operation via manual button, control for brake/locking and suspension on driver’s side, ahead of the axles Storage compartment between longitudinal beams when extended Axles & Suspension SAF disc brake axles with 430 mm disc diameter Rear axle is self-steering, with automatic reverse lock via reversing light, with additional lock function on the trailer via hand button, and manual override in the tractor unit (pin 10), no truck installation required. Offset axle spacing mm Air suspension 1st axle with automatic lift, also electrically controllable from the truck, with starting aid, no truck installation required (starting aid functional up to 30% axle overload and max. speed of 25 km/h) Brake System 2-line compressed air brake system Color-coded line routing for easy servicing Spring-actuated parking brake 2 error-proof coupling heads at the front, without connectio

Koşul: yeni, makine/araç numarası: d9c951d746f03c05bc5470f89, boş ağırlık: 5 kg, azami yük ağırlığı: 29.045 kg, toplam ağırlık: 35 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further Information Chassis Semi-Trailer Forwarding Fine-grain steel welded construction, fifth-wheel plate with interchangeable 2-inch kingpin Vario stanchion system 4 pairs recessed into the loading area, collapsible to 2,100 mm and extendable to approx. 3,500 mm for loading. Stanchions can be locked at 100 mm intervals for an internal width of 2,100 mm to 3,000 mm, 4 pairs of divisible stanchions 600 mm + 1,200 mm, total height 1,800 mm, removable. For an internal stanchion width above approx. 2,350 mm, oversize width. Vario bulkheads Floor prepared for the installation of 3 bulkheads. 4 x 5 pairs of Vario stanchion pockets for plug-in bulkheads (front and rear respectively), and 1 x 3 pairs each in the center for transporting welded mesh of 2 x 5,000 mm or 2 x 6,000 mm 2 Vario bulkheads, each consisting of 1 pair of plug-in stanchions and 1 crossbeam at the top approx. 2,200 mm wide. Crossbeam extendable by 220 mm on each side, with lashing hole for securing. Height of Vario bulkhead approx. 1,900 mm, adjustable to 1,300 mm or 700 mm. 4 stanchion pockets recessed in the center of the floor for 80 x 80 mm plug-in stanchions 1 pair of supports at the bottom for front Vario bulkhead 1 pair of supports at the bottom for rear Vario bulkhead Outer frame with slight incline, with Load-Lock profile for lashing strap hooks 14 additional pairs of lashing eyes recessed in the outer frame, 5 tons each 24 t, 2-speed landing gear, single-side operation, with straight lower section, without compensating device Pull-out ladder at rear Wheel chocks with holder Cjdei Ri R Djpfx Aldjgt Aluminum side underrun protection Galvanized steel rear underrun protection Quarter fenders in front of and behind the axle assembly With anti-spray mud flaps only on the last axle Rear impact guard 8 construction steel winches with wire rope and counter hooks, 4 left and 4 right, with wire rope routing through the outer frame, 1 removable plug-on transmission for construction steel winches – supplied loose (without frame mount) 1 spare wheel holder for 1 E-wheel, with wheel fastener set 1 plastic toolbox, with drawer and shelf, w=650 / h=520 / d=670 mm, can be locked with a padlock (lock not included) 1 stanchion storage box closed, open at the top, below the loading area, doors on both sides, w=450 mm / h=400/420 mm / d=2460 mm 4 lashing/stanchion rails set transversely in the floor across the full width to the outer frame (max. usable internal width between the outer plug-in stanchions approx. 2,170 mm), approx. 100 mm high. With 20 mm round steel bars, top and bottom, spaced approx. 60 mm apart (of the round steel). Bottom finishes with angle steel, half open downwards. For lashing and plugging in 80 x 80 mm stanchions. Note: Stanchion pockets/plug-in stanchions are not designed solely for securing long loads, pipes, etc. without lashing Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser aligned to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, activated by braking 3x (starting aid works up to 30% axle overload and up to a max speed of 25 km/h) Axle lift below the recommended driving height, therefore no warranty for tire damages Brake system 2-line compressed air brake system, color-coded line routing for easy service Spring-actuated parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at front, no c