Kullanılmış Fliegl Zts 200 P satın al (33.113)

Koşul: yeni, makine/araç numarası: 535119ca408d3bd5a8e74be51, boş ağırlık: 6 kg, azami yük ağırlığı: 11 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-loader Trailer Welded steel construction Turntable with heavy-duty ball bearing slewing ring, tool box recessed in the turntable frame Foldable rear support Wheel chocks with holders Aluminium side underrun protection Half-shell mudguards on 1st axle, quarter-shell mudguards in front of and behind the 2nd axle with anti-spray mudflaps behind each axle 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with padlock (lock not included) Extendable deck widenings to 3,000 mm (not in rear chamfer) (the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm), central compartment for timber planks on the loading area, 70 mm planks for widening to 3,000 mm Lashing Points Low-loader 3 pairs of 10 t lashing points integrated in the floor at the front 6 pairs of lashing mushrooms, 10 t each, recessed at the top and side in the outer frame 1 x after gooseneck, remaining distributed in between, spacing not greater than 1,200 mm 1 x rear chamfer 5 pairs of ring lashing eyes in the outer frame, 5 t each (instead of stake pockets) Trailer Drawbar Assembly - Turntable trailer Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum brake axles Axles/chassis laser measured to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings Cgedpei Ri N Hofx Aldot Wheels and Tyres 235 / 75 R 17.5 As per manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connecting cable Note: This trailer may only be towed by tractor units that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, yellow LED side markers 2 white/red lane marker lights at the rear 2 white position lights at the front 1 revolving beacon with holder, switchable via parking light (beacon removable) 2 pairs of warning signs, double LED illuminated, extendable to 3,000 mm 2 x 7-pin interchange-proof plugs at the front, with connecting cable Deck Front section with steel floor, then 70 mm softwood floor, wheel arch areas with steel/chequer plate covering Rear chamfer with 70 mm softwood floor Low-loading area incl. rear chamfer 8,200 mm Access Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional foldable ramp lock at the bottom (prevents side slippage of ramps, not in combination with hydraulic side ramp adjustment) Wood covering Assisted by spring lifters Operating Notes Special permit is required for 10,000 kg axle load. Permit must be applied for individually in each federal state; the legislator is not obliged to guarantee a permit for 20 t GVW. Customer's responsibility. The specified total weight is technically possible, depending on the load, the permissible gross weight may not be achievable due to axle/support/saddle load restrictions. Registration / Plates Country of registration: Germany Test approval according to EC 2007/46 24/7-Service Hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, white on sides and red at rear Warning sign according to ECE - 70 Paintwork Frame: DB Novagrau Ramps: hot-dip galvanised Note: Archive photos!

Koşul: ikinci el, makine/araç numarası: WFDFLT22001007597, boş ağırlık: 6.200 kg, azami yük ağırlığı: 11.800 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2018, lastik boyutu: 235/75 r17,5, Üretim yılı: 2017, Further information Chassis: Steel welded construction, double-cranked with low-bed sections in front of and behind the axle assembly; low-bed sections are beveled for drive-in capability; turntable with heavy-duty ball race ring; foldable rear support; wheel chocks; side underrun protection; quarter shell mudguards. Lashing eyes: Over the front axle: 2 pairs of ring lashing eyes, each rated to 5 tons, at the cranked section. Low-bed/rear axle: 6 pairs of lashing eyes, each rated to 8 tons, located laterally in the low-bed section. 6 pairs of lashing eyes, each rated to 5 tons, positioned between the longitudinal beams. Pair of stake pockets recessed into the outer frame (internal dimension 70 x 40 mm), or, as an alternative to stake pockets, 5-ton ring lashing eyes recessed in the floor. Drawbar: Certified 40 mm towing eye. Cgsdpfx Aei Ri N Uoldjt Axles: BPW drum brake axles. Braking system: 2-line compressed air braking system; spring-loaded parking brake; 2 non-interchangeable coupling heads at front. Electrics: 24V electrical system; multi-chamber lights; side marker lights in yellow; 2 white position lights at the front; 2 white/red outline marker lights at the rear; rotating beacon with bracket; pair of illuminated, extendable warning panels (extendable up to 3,000 mm); 2 x 7-pin non-interchangeable connectors at front. Floor: Front cranked section with steel/chequer plate covering; storage box integrated into the drive-on bevel to the cranked section; drive lane area and central area between the beams with steel/chequer plate covering; rear bevel with 70 mm softwood floor; low loader loading area including rear bevel: 5,900 mm. Loading ramps: Hook-on bar for aluminium ramps across the full width, U-profile across the full width; pair of aluminium ramps, each 800 mm long and approx. 400 mm wide; load-bearing capacity per pair: 14,000 kg; ramp storage compartment between the beams. Approval: Contour marking with reflective strips according to ECE R 048; white at the sides and red at the rear.

Koşul: yeni, makine/araç numarası: 2b58968e34fac93b429a256e9, boş ağırlık: 5 kg, azami yük ağırlığı: 12 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis – Low-bed Trailer - Steel welded construction - Turntable with heavy-duty ball race, storage box recessed in turntable front section - Foldable rear support - Wheel chocks with holders - Aluminum side underrun protection - Full-width rear spray flap - Quarter shell mudguards in front of 1st axle - Spare wheel carrier for 1 spare wheel, with attachment kit - Spare wheel, same brand and specification as base tires, steel rim - Plastic toolbox with insert shelf, dimensions: width=620 / height=360 / depth=440 mm, lockable with a padlock (lock not included) Tie-down Points Low-bed - 3 pairs of lashing points, each rated for 10 tons, integrated into the floor at the front - 6 pairs of lashing studs, inserted in the upper and side outer frame, each for 10 tons; 1 in the gooseneck area, remaining distributed with max spacing of 1200 mm; 1 at rear incline - 5 pairs of ring-type lashing eyes recessed into the outer frame, each rated for 5 tons (convertible to stake pockets) Trailer Drawbar/Turntable - Drawbar with tested 40 mm towing eye Axles & Suspension - SAF drum brake axles - Axles/chassis laser aligned to reduce tire wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber bushings Wheels and Tires - 235/75 R17.5 - Tire brand at manufacturer’s discretion - Steel twin-mounted rims, factory silver Braking System - 2-line air brake system - Spring-loaded parking brake - 2 reverse-polarity-proof coupling heads at the front, with connecting lines to the towing vehicle - ABS and ALB, with ABS plug at the front, connection cable, voltage converter for 12/24 volt operation Note: A 7-pin 12V socket on the tractor/hauler is required (required for electrics with voltage converter!) Warning: The trailer may only be towed by vehicles that guarantee the effectiveness of the ABS! Electrics - 24 volts, multi-chamber lighting, yellow LED side markers - 2 white/red track lights at the rear - 2 white position lights at the front - Additional LED work light at the rear, operated via reverse gear - 2 x 7-pin reverse-polarity-proof plugs at the front, with connecting cable - 1 x 7-pin agricultural plug - Voltage converter 12/24 volt (for electrics only, not for ABS/EBS) Floor - Steel floor in the front area, followed by 70 mm softwood floor Cgjdei Ri Nxspfx Aldet - In the wheel arch area: steel / chequer plate covering - Rear incline with 70 mm softwood floor - Low-bed platform including rear incline: 8,200 mm Access Ramps - Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable - Wooden overlay - Spring-lift assisted Operating Instructions - A special permit is required for 10,000 kg axle load. The permit must be applied for separately in each federal state; approval for 20-ton GVW is at the discretion of the authorities – customer’s responsibility. Country of Registration / License Plates - Registration country: Germany - With Dekra inspection and expert's report (according to §13 EC-FGV) - 24/7 service hotline - Prepared for two-line license plate holder - Reflective contour marking as per ECE R 048, white on the sides and red at the rear Paintwork - Frame: DB 7350 Novagrau - 10-year anti-perforation warranty - Drawbar: galvanized or painted black, depending on manufacturer's choice - Ramps: hot-dip galvanized Note: Archive images!

Koşul: yeni, makine/araç numarası: 6d88bda3a1ee2464a81b34f36, boş ağırlık: 4 kg, azami yük ağırlığı: 13 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction, with slight central pre-camber, turntable with heavy-duty slewing ring, wheel chocks with holder, quarter-circle mudguards in front of and behind each axle. Lashing Eyes for Low-Bed Over front axle: 2 pairs of ring lashing eyes at 5t each, front at the gooseneck Low-bed: 4 pairs of lashing eyes, side-mounted in the low-bed at 6t each 5 pairs of lashing eyes at 5t between the longitudinal beams Drawbar / Turntable Trailer Coupling Drawbar with certified 40 mm towing eye, mechanically length-adjustable and lockable in 6 x 100 mm steps (Drawbar length 1,700 - 2,300 mm) Axles & Suspension BPW drum brake axles with 10t axle load each, automatic slack adjusters. Axle endurance braking test rated up to 105 km/h, rear axle manually removable. To remove: release air locking and lower the rear to the ground. Then disconnect the hoses at the rear module, insert the transport bar into one of the rear bushings, and, by gently pressing down and simultaneously pulling back, uncouple the rear (parking brake released). After loading or unloading, move the rear module into place and connect up to the marking. Then raise to driving height and reconnect hoses. Confirm bolt locking (visual check to ensure bolt locks) and test rear functionality. Air suspension with raise/lower valve Wheels and Tyres 235 / 75 R 17.5, from leading brands, steel rims in twin arrangement, factory silver finish Braking System 2-line air brake system, spring-loaded parking brake, 2 fail-safe coupling heads front, with connecting lines to tractor unit, EBS (Electronic Braking System) with EBS plug front, incl. connection cable. Attention: This trailer may only be towed by tractor vehicles capable of guaranteeing effective ABS operation! Electrics 24-volt system, multi-chamber lights, yellow side LED lighting, 2 white position lights front, 2 white/red lane marker lamps rear, rotating beacon with holder, operated via parking light circuit (beacon removable), 2 pairs of warning plates, double LED illuminated, extendable up to 3,300 mm, removable with plug, 2 x 7-pin fail-safe plugs front with connection cable, 1 x 7-pin agricultural plug, voltage transformer 12/24 volts (for electrical system only, not ABS/EBS) Floor Steel/chequer plate floor on gooseneck, between longitudinal and cross members with perforated plate covering. Axle covers not drivable, extension to 3,000 or 3,300 mm possible. Operating Notes Note! For 10,000 kg axle load, special approval is required. Approval must be requested separately in each German federal state; a commitment for 20t gross weight is not guaranteed by law. Customer risk. Special approval required if overall towing length exceeds 18,750 mm. Observe country-specific registration regulations. The specified gross vehicle weight is technically feasible; depending on the load, gross weight may not be achievable while adhering to permissible axle, support, and fifth-wheel loads. Observe BO-circle regulations!!! Cedpsi Ri N Asfx Aldsgt Registration / Plates Registration country: Germany, with Dekra inspection and report (according to §13 EC - FGV), prepared for single-line number plate holder, warning plate according to ECE-70, contour marking with reflective tape according to ECE R 048 Paintwork Front frame hot-dip galvanized with passivation, rear frame RAL9006 silver, drawbar KTL black Note: Archive images!

Koşul: ikinci el, boş ağırlık: 4.150 kg, azami yük ağırlığı: 15.850 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2022, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.020 mm, yükleme alanı hacmi: 17 m³, toplam uzunluk: 7.000 mm, süspansiyon: çelik, lastik boyutu: 235/75 17,5, lastik durumu: 80 yüzde, renk: gümüş, Üretim yılı: 2022, ön lastik ölçüsü: 235/75 17,5, arka lastik boyutu: 235/75 17,5, şoför kabini: gündüz kabini, emisyon sınıfı: hiçbiri, Donanım: ABS, kamyon kaydı, Reference number for inquiries: 410401 Fliegl, ZPS200K * Year of manufacture: 2022 * ABS, anti-lock braking system * Air connection coupling head (red + yellow) * Connection plug 2x7-pin * Storage box / toolbox * Galvanized * Pneumatic locking * Suspension: leaf * Gross weight: 20,000 kg * Unladen weight: 4,150 kg * Payload: 15,850 kg * Permissible gross weight: 20,000 kg * Axle manufacturer: SAF * Tire condition, 1st axle: 80%|80% -- 80%|80% – Tire size: 235/75 R17.5 Cgodpfxjy D E Ubj Aldjt * Tire condition, 2nd axle: 80%|80% -- 80%|80% – Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Internal dimensions: L = 7,000 mm, W = 2,500 mm, H = 1,020 mm * Internal volume*: 18 m² * Pallet spaces: 17 * Suitable for roll-off and skip containers * Roll-off containers 5,000–7,000 mm length * Lowerable drawbar * Compartment for loading ramps * External dimensions * Ride height: 1,020 mm * Platform length approx. 7,000 mm * Pneumatic locking * Air connection: duomatic Liability disclaimer: Subject to change, prior sale, and errors excepted. You can find more pictures and videos on our website. Our comprehensive service includes e.g.: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing * Handling of all (export) documentation * Ordering of export / customs license plates * Vehicle reconditioning: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV approvals, registration service * Transfer of commercial vehicles Contact our trained professional staff—we are happy to advise you.

Koşul: ikinci el, boş ağırlık: 4.150 kg, azami yük ağırlığı: 15.850 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2022, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.020 mm, yükleme alanı hacmi: 17 m³, toplam uzunluk: 7.000 mm, süspansiyon: çelik, lastik boyutu: 235/75 17,5, lastik durumu: 80 yüzde, renk: gümüş, Üretim yılı: 2022, ön lastik ölçüsü: 235/75 17,5, arka lastik boyutu: 235/75 17,5, şoför kabini: gündüz kabini, emisyon sınıfı: hiçbiri, Donanım: ABS, kamyon kaydı, Reference number for inquiries: 41040 Fliegl, ZPS200K * Year of manufacture: 2022 * ABS (Anti-lock Braking System) * Air connection coupling head (red + yellow) * Connection plug 2x7-pin * Storage/toolbox * Galvanized * Pneumatic locking system * Spring suspension (leaf springs) * Gross vehicle weight: 20,000 kg * Unladen weight: 4,150 kg * Payload: 15,850 kg * Permissible total weight: 20,000 kg * Axle manufacturer: SAF% * Tire condition 1st axle: 80%|80% -- 80%|80%, Tire size: 235/75 R17.5 * Tire condition 2nd axle: 80%|80% -- 80%|80%, Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Internal dimensions: L=7,000 mm, W=2,500 mm, H=1,020 mm * Internal volume*: 18 m² * Pallet spaces: 17 * Suitable for roll-off and skip containers * Roll-off containers 5,000–7,000 mm length * Lowerable drawbar * Storage compartment for drive-on ramps * External dimensions * Ride height: 1,020 mm Cgedpfxoy D E Uho Aldet * Platform length: approx. 7,000 mm * Pneumatic locking * Duomatic air coupling Liability disclaimer: Subject to alterations, prior sale and errors excepted. You will find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing solutions * Processing of all (export) documents * Ordering export and customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and cargo securing * TÜV certifications, registration service * Transfer of commercial vehicles Please contact our trained specialists for advice – we are happy to help.

Koşul: ikinci el, makine/araç numarası: WFDFLT22001011091, boş ağırlık: 5.340 kg, azami yük ağırlığı: 12.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2021, lastik boyutu: 235/75 r17,5, Üretim yılı: 2021, Further information Chassis central axle trailer Fine-grain steel welded construction Type TPS 200 (special permit required) Gear support leg at front Rear support can be folded Wheel chocks with holders Side underrun protection made of aluminium Full-width rear mud flaps Cgedpop N Dgusfx Aldjt Mud flaps in front of each axle and anti-spray mud flaps behind each axle 1x spare wheel holder for 1 spare wheel, with wheel fixing kit 1x spare wheel, same make as standard tires, steel rim 1x stainless steel toolbox, w=600/h=400/d=500 mm, with polished lockable door Lashing points low loader 5 pairs of stake pockets recessed in the outer frame, inside 70 x 40 mm, (convertible to 5t lashing rings, not included) 7 pairs of lashing mushrooms recessed on the top and side of the outer frame, each rated at 10t 2 pairs of folding lashing rings additionally recessed in the low bed area, each 10t (1 pair at the front and 1 at the rear slope) Drawbar system for central axle trailer Drawbar with certified 50 mm towing eye Axles + Suspension SAF drum brake axles Laser-measured axles/chassis to reduce tire wear and fuel consumption Axle spacing 1810 mm (then 10t axle load technically permitted) Air suspension Braking system 2-line compressed air brake system, color-coded lines for easy servicing. Spring-loaded parking brake Duomatic coupling at front, with connecting line to tractor unit EBS electronic brake system with EBS connector at the front, including connection cable Note: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! With lift & lower valve Vehicle – driving stability system Axle load detection via EBS CAN bus signal, for display in the cabin, truck needs appropriate preparation, not installed in the truck (not a calibrated scale) Wheels and tires 235/75 R17.5, make: Fulda Steel rims, factory silver Electrics 24 volt, multi-chamber lights, yellow side LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 15-pin connector at front including connecting cable 1 additional LED work light at rear, switched via reverse light 1x LED beacon with bracket, powered by position light (removable beacon) Floor Subsequently finished with 70 mm softwood floor, wheel arch area with steel/chequer plate cover Rear incline with Mega Grip surface made from serrated grating Low bed area including rear incline 6500 mm Front wall / corner stanchions 25 mm aluminium hollow profile, 400 mm high, detachable Loading ramps Steel ramps 3600 mm long, 750 mm wide, split by cable tensioning, laterally adjustable Ramp displacement: min. spacing approx. 600 mm, max. outside width approx. 2880 mm Ramp surface with Mega Grip made from serrated grating Operated hydraulically by separate electrohydraulic unit, mounted in steel box, controlling located on right-hand side. Note: NATO socket with connection cable on truck required. Connection cable must not be connected while driving! Hydraulic lateral displacement of ramps, individually controllable (only in conjunction with hydraulic ramp actuation)

Koşul: yeni, makine/araç numarası: 8df1ead53cc82aeb51e50a37d, boş ağırlık: 4 kg, azami yük ağırlığı: 13.880 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Turntable Skip Loader Fine-grain steel welded construction Container locking system: - 2 pairs of locking hooks recessed into the floor - Pneumatic operation The container locking system is designed as an internal 2-point mechanism; locking of skip containers with internal bars is not possible (designed for the transport of roll-off containers with subframes according to DIN 30722). Note! At the start of the roller trough at the front, the container must be pushed on completely flat! Longitudinal guide rails, laterally adjustable and removable, rails approx. 115 mm high Turntable with heavy-duty ball bearing slewing ring 8 pairs of lashing mushrooms recessed into the upper and side parts of the outer frame, each rated at 5 t 7 pairs of stake pockets recessed into the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t lashing rings, not included) 2 wheel chocks with holder Aluminium side underrun protection Steel rear underrun protection Quarter section mudguards according to EC standards With anti-spray mudflaps to EC Directive Drawbar arrangement for turntable trailers Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Wheels and Tires 235 / 75 R 17.5 Manufacturer’s choice Steel wheels in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 interchangeable coupling heads at front, with connecting lines to towing vehicle, ABS and ALB, with ABS socket at front, with connection cable Attention: The trailer may only be towed by tractors that ensure proper ABS function! Cedpji Ri Nusfx Aldsgt Electrics 24 Volt, multi-chamber tail lights, yellow LED side marker lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin interchangeable plugs at front, with connecting cable Floor Steel floor Container roller trough at front, recessed in floor, for roll-off containers 5,000 – 7,000 mm length Note: Minor floor deformation due to welding distortion possible! Loading ramps Lockable storage space for loading ramps beneath bed Operating instructions For 10,000 kg axle loads, a special permit is required. The permit must be applied for separately in each federal state; there is no guarantee from the legislator for 20 t permissible total weight. Customer’s risk. The specified total weight is technically possible; depending on the type of load, the permissible total weight may not be achievable while adhering to axle/support and kingpin loads (impaired driving and tracking possible from poor load distribution). Country of registration / Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 Service Hotline Prepared for one-line number plate holder Contour marking with reflective tape to ECE R 048, white lateral and red rear Warning panel according to ECE-70 Paintwork Frame DB 7350 Nova Grey 15-year warranty against rust-through Note: Floor deformation from hot-dip galvanization possible! Drawbar KTL black Important: Archive photos!

Koşul: ikinci el, toplam ağırlık: 18.000 kg, ilk tescil: 09/2019, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 3.000 mm, - Çift lastik donanımı - Mega, - 3 metre iç yükseklik - Yan yükleme Cgedpfxexxxlto Aldjt

Koşul: ikinci el, azami yük ağırlığı: 16.000 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 12/2018, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 1.000 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.100 mm, Üretim yılı: 2018, Donanım: ABS, hidrolik arka platform, FLIEGL ZPS200K dış makaralı kombine konteyner römorku 5.500 mm – 7.000 mm, 2x 10 m³ atık konteyneri ve iş makinesi taşımacılığı için. Alman römork, 1. el. "ZPS200K Kombi-Alçak Şasili Römork" özellikle değişken iş makinesi, rulo konteyner ve atık konteyner taşımacılığı için uygundur. 20 ton azami yüklü ağırlığa sahip 2 dingilli alçak şasili tasarım. Düşük yükleme yüksekliği 1030 mm. 2 atık konteyner taşımak için alçaltılabilir döner tabla/çekme kolu. Cgedpfoy Hd Rgex Aldjt

Koşul: yeni, azami yük ağırlığı: 23.340 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, NEW VEHICLE Fliegl 3-Axle Flatbed Low Loader DTL - S - 300 Agrar, frame and chassis hot-dip galvanized Csdpfxellwhno Aldsgt Gross weight: 24,000 kg / 30,000 kg Payload: 17,340 kg / 23,340 kg Unladen weight: 6,660 kg Overall length: 11,625 mm Platform length: 9,000 mm incl. 900 mm approach ramp Loading height: 900 mm Comprehensive lashing package Drawbar 40 mm Tyres 235 / 75 R 17.5" dual wheels Without ABS, approval max. 60 km/h Electrical system 12 Volt, LED beacon Ramps with spring assist, ramp length 2,800 mm Vehicle from current production – lead time approx. 14 days. Plus freight/preparation from Wiesmoor depot €1,280.00 / net Towing vehicle LoF, agricultural or forestry registration Hire purchase offer: 48-month term, residual value 40%, down payment only VAT. Monthly rate: €599.00

Koşul: yeni, makine/araç numarası: 2dff0c136c85096f36822a0bb, boş ağırlık: 7.150 kg, azami yük ağırlığı: 16.850 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball-bearing slewing ring, tool box recessed into turntable front section Foldable rear supports 2 wheel chocks with holders Aluminum side underrun protection Full-width rear spray flaps Extendable widening sections up to 3,000 mm (not including rear taper) (The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central storage compartment for timber boards on the loading platform 70 mm timber boards for widening up to 3,000 mm Cgodpfx Alsi Riy Eedst Lashing eyes for low loader 3 pairs of 10 t lashing points integrated into the front floor 6 pairs of 10 t lashing mushrooms, recessed into the upper and side outer frame 1x in the neck area The remainder are distributed in between, distance not greater than 1,200 mm 1x rear taper 5 pairs of stake pockets recessed in the outer frame, inside dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Towing Device Trailer Turntable Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker compensation) Brake System 2-line compressed air brake system Colored line routing for easy servicing. Spring-loaded parking brake included. 2 non-interchangeable coupling heads at the front, with connecting lines to tractor unit ABS and ALB with ABS connector at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Twin steel rims, factory silver Electrics 24 Volt, multi-chamber tail lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2x 7-pin non-interchangeable connectors at the front, with connecting cable 1 LED beacon with holder, operated via parking light (removable lamp) 2 pairs of warning signs, double LED illuminated and extendable to 3,000mm Floor Front area steel floor, then 70 mm softwood floor, steel/chequer plate covering in the wheel arch area Rear taper with 70 mm softwood floor Low-bed area incl. rear taper: 8,200 mm Loading Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Timber deck included With spring-assisted lifting Operating Notes At 10,000 kg axle load, an exemption certificate is required! Only indivisible loads permitted! The total weight specified is technically feasible; depending on the cargo, the total weight may not be achievable due to permissible axle, support, and fifth wheel loads. (Poor driving and trailing performance possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany With Dekra inspection and certificate (in accordance with §13 EC-FGV) 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips as per ECE R 048, side white and rear red Paint finish Frame DB 7350 Nova grey 10-year corrosion warranty Drawbar galvanized or black, manufacturer’s choice Steel loading ramps hot-dip galvanized Please note: Archive images!

Koşul: yeni, makine/araç numarası: ede0610378cbe39cc4883251d, boş ağırlık: 24.000 kg, azami yük ağırlığı: 7.550 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction 1st pair of wheel recesses integrated into the steel platform in the driving aisle area, tapered for entry, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note! The frame is 400 mm higher than the wheel recess in the main beam area. If machines are to be transported and the total height needs to be checked, we kindly request the technical datasheet of the machine types with exact specifications (if total height is exceeded -> customer risk, approval required). Depending on ground clearance under the machines, inserts in the wheel recesses may be required by the customer. Turntable with heavy-duty ball bearing slewing ring, toolbox integrated into the turntable front section Rear support foldable 2 wheel chocks with holders Side underrun protection in aluminium Rear mudflaps across the full width Extendable widening to 3,000 mm (not in rear bevel area) (The track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks in the centre of the loading area 70 mm wooden planks for widening to 3,000 mm Lashing points for low loader 3 pairs of lashing points integrated into the front floor, each 10 t Incl. 6 pairs of lashing mushrooms recessed in the upper and side external frame, each 10 t 1 x in the gooseneck area The rest distributed in between, distance not greater than 1200 mm 1 x rear bevel Csdpfxei Ri Rye Aldsgt 5 pairs of stake pockets recessed into the external frame, inside 70 x 40 mm (convertible to 5 t ring lashing points, not included) Drawbar for turntable trailer Drawbar with certified 40 mm towing eye Axles + Suspension SAF drum brake axles Axle/undercarriage laser measured for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting Brake System 2-line compressed air brake system Colour-coded piping for easy servicing Spring-actuated parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the truck ABS and ALB, with ABS socket at the front, including connection cable Attention: The trailer may only be towed by vehicles that ensure the effective operation of the ABS! Wheels and Tyres 235 / 75 R 17.5 manufacturer's choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white front position lights 2 white/red rear marker lights 2 x 7-pin non-interchangeable plugs at the front, with connection cable 1 LED beacon with holder, switched via parking light (removable beacon) 2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm Floor Steel floor in the front section, incl. followed by 70 mm softwood floor, wheel arch areas with steel/checkered plate covering Rear bevel with 70 mm softwood floor Low loader platform incl. rear bevel 8,200 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable covered with wood with spring lift assistance Operating Instructions With 10,000 kg axle load an exemption permit is required, only indivisible loads possible!!! The total weight stated is technically feasible; depending on the cargo, the total weight may not be achievable within the permitted axle, support, and fifth wheel loads (Poor driving and trailing behaviour possible due to incorrect load distribution) Country of Approval / Plates Country of approval: Germany Incl. with Dekra approval and certificate (acco

Koşul: yeni, makine/araç numarası: 55d3c5c03e032385649769b1b, boş ağırlık: 9.900 kg, azami yük ağırlığı: 14.100 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty slewing ring, integrated storage box included. Turntable drawbar Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Extendable widening to 3,000 mm (not at rear chamfer) (Note: The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central wooden plank storage compartment 70 mm wooden planks for widening to 3,000 mm Low loader lashing rings 3 pairs of lashing points rated 10 tonnes each, integrated at the front 6 pairs of lashing mushrooms, recessed in the upper and side outer frame, each rated at 10 tonnes 1 x in the neck area The remaining pairs are spaced at intervals no greater than 1,200 mm 1 x at the rear chamfer 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Turntable trailer drawbar system Drawbar with certified 40 mm towing eye Note! With 40 mm towing eye, the permissible total weight of the truck must not exceed 18,000 kg; otherwise, a 50 mm towing eye is required. Axles + Suspension SAF drum brake axles Laser-measured axles/chassis for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation at front and rear (rocker compensation) Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims, twin configuration, factory silver Braking System 2-line pneumatic brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connecting lines to the tractor unit ABS and ALB, with ABS connector at front and connection cable Note: The trailer may only be towed by vehicles capable of ensuring effective ABS operation! Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable connectors at front, with connecting cable 1 LED beacon with bracket, operated via parking light (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Steel floor at front Followed by 70 mm softwood floor, steel/chequer plate in wheel arch area Rear chamfer with 70 mm softwood floor Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber-decked With spring-assisted support Operating Instructions An exemption permit is required for a 10,000 kg axle load, only indivisible loads permitted! The stated total weight is technically feasible; depending on the load, the total weight may not be achieved while adhering to the permitted axle, support, and kingpin loads. (Poor handling and tracking may result from incorrect load distribution) Registration/Country Signs Country of registration: Germany 1 with Dekra inspection and report (according to §13 EC - FGV) 24/7 Service Hotline Prepared for two-line licence plate holder Contour markings with reflective strips to ECE R 048, white on sides and red at rear Paintwork Frame RAL 3002 Carmine Red 10-year anti-perforation warranty Cgedpsi Ri I Eefx Aldot Drawbar, galvanised or black, as per manufacturer specification Access ramps hot-dip galvanised Note: Archive photos!

Koşul: yeni, makine/araç numarası: a198a229880f94ce822d671fc, boş ağırlık: 3 kg, azami yük ağırlığı: 16 kg, toplam ağırlık: 20 kg, dingil konfigürasyonu: 1 dingil, lastik boyutu: 385 / 65 r 22,5, Further information Chassis Semi-trailer Container Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" kingpin, 2 pairs of removable guide rollers 4 container locks with robust outriggers on 20' basis for swap bodies 7.45 and 7.82 m 24 t, 2-speed landing gear, single-sided operation, with straight base, without shift compensation, unhitching under load only possible with even distribution! 2 wheel chocks with brackets Side underrun protection in aluminium Rear underrun protection galvanized steel, Half-shell mudguards with anti-spray flaps Axle & Suspension SAF disc brake axle, with 430 mm disc diameter, Air suspension with lift & lower valve, with hold function for raising/lowering Wheels and Tires 385 / 65 R 22.5 from leading manufacturers Steel rims, factory silver Csdoi Rixnopfx Aldogt Brake System 2-line compressed air brake system Spring-loaded parking brake 2 confusion-proof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! Electrics 24 Volts, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane position lights at rear 2 x 7-pin confusion-proof sockets at the front, without connecting cable Approval / Plates Country of approval: Germany with Dekra inspection and report (according to §13 EC - FGV) prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides and red at rear Warning sign according to ECE - 70 Paintwork Frame DB nova grey Support legs black coated Attention: Archive images!

Koşul: ikinci el, boş ağırlık: 5.300 kg, azami yük ağırlığı: 12.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2010, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.900 mm, yükleme alanı hacmi: 52 m³, süspansiyon: hava, lastik boyutu: 235/75R17,5 ---/141J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 ---/141J, arka lastik boyutu: 235/75R17,5 ---/141J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Lashing eyes, -- Errors, omissions, and changes excepted, sample images --, More data at: !, More details: ! Cgsdpfxey Niuis Aldjt

Koşul: ikinci el, boş ağırlık: 4.300 kg, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2019, yükleme alanı uzunluğu: 7.200 mm, süspansiyon: hava, lastik boyutu: 445/45 R19,5 160J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 445/45 R19,5 160J, arka lastik boyutu: 445/45 R19,5 160J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, -- Druckfehler, Irrtümer und Änderungen vorbehalten, Musterbilder -- Weitere Informationen unter: !, Mehr Details: ! Cgjdpfxjy Nitrj Aldet

Koşul: ikinci el, boş ağırlık: 3.690 kg, azami yük ağırlığı: 9.810 kg, toplam ağırlık: 13.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2019, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.700 mm, yükleme alanı hacmi: 48 m³, süspansiyon: hava, lastik boyutu: 285/70R19,5 148J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 285/70R19,5 148J, arka lastik boyutu: 285/70R19,5 148J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Lashing eyes, -- Errors in printing, inaccuracies, and subject to change, Sample images --, More data at: !, More details: ! Cjdpfx Aley Hhzcodjgt

Koşul: ikinci el, azami yük ağırlığı: 33.520 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2011, Donanım: ABS, Vehicle identification no.: WFDFLT33502005191 REAR TIPPER – Steel chassis – ALU body German MOT (HU) valid until 04/2026 – Safety inspection (SP) until 10/2025 Unladen weight: 5,480 kg Body dimensions: 8,350 / 7,500 x 2,460 x 2,200 mm – Capacity: approx. 43 m³ BPW Eco Plus axles with drum brakes 1 x aluminum landing leg Cedpfxswpbg Dj Aldogt Combination – swing doors – pendulum tailgate with 2 x sliders Rolling tarpaulin Platform Adjustable underrun protection Tyres: 385/65 R 22.5 Aluminum wheels Subject to alterations, prior sale, and errors excepted. The description is for general vehicle identification only and does not constitute a warranty in the legal sense. The specification according to the purchase contract is binding. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide an offer through our partner workshops! Vehicle may be fitted with advertising stickers and/or lettering. Our general terms and conditions for delivery and payment apply.

Koşul: ikinci el, Fonksiyonellik: sınırlı işlevsellik, boş ağırlık: 6.575 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 07/2011, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.300 mm, toplam uzunluk: 13.650 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5, lastik durumu: 30 yüzde, dingil mesafesi: 1.360 mm, Üretim yılı: 2011, Donanım: ABS, Kullanılmış açık yarı römork Uzun demirler için çentikli çelik ön duvar Taban çelik profillerle güçlendirilmiş Yanlarda dikme cepleri Takma dikmeler için depo kutusu Csdpfx Aoy Ercboldjgt

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 3.420 kg, azami yük ağırlığı: 6.580 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, izin verilen dingil yükü (dingil 1): 5.000 kg, izin verilen dingil yükü (dingil 2): 5.000 kg, ilk tescil: 11/2020, bir sonraki muayene (TÜV): 03/2027, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.400 mm, yükleme alanı hacmi: 36 m³, toplam uzunluk: 8.370 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.700 mm, süspansiyon: hava, lastik boyutu: 235/75R17,5, lastik durumu: 60 yüzde, dingil mesafesi: 990 mm, renk: gümüş, römork freni: frenli römork, Donanım: ABS, ° Merkez akslı römork ° FLIEGL üretimi şasi ° Tente ve branda üst yapı ° Ön ve arka kapılar (geçişli) ° Kapı başına 2 kilit ° Yanlarda kayar branda ° Kayar tavan ° 3 katlı alüminyum çıtalar Cedpfsy Nf N Nox Aldogt ° Palet tampon çıtaları ° 235/75R17,5 143J lastikler ° Yüksekliği ayarlanabilir çekme kolu ° Güçlendirilmiş yük tabanı ° Kaldırma ve indirme fonksiyonu ° Kırmızı ve sarı bağlantı başlıkları ° 24 Volt, 15 pinli aydınlatma fişi ° EBS fişi ° Araçta normal kullanım izleri mevcut

Koşul: ikinci el, azami yük ağırlığı: 30.200 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2019, bir sonraki muayene (TÜV): 06/2025, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 1.750 mm, yükleme alanı hacmi: 30 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.380 mm, Donanım: ABS, Fliegl DHKA 390 SDS01 30m³ Rear Tipper Aluminum Lightweight Tipping Body 3-axle rear tipper semi-trailer with lightweight aluminum tipping body, Type DHKA 390 – 30 m³ rear tailgate, Greenline ----### Aluminum Lightweight Tipping Body / Aluminum Box Body ###---- Aluminum tipping body, Volume: approx. 30 m³, Fifth wheel height: approx. 1,200 mm, Gross vehicle weight rating (GVWR): 35,000 kg, Curb weight: 4,800 kg, Payload: 30,200 kg, 1st axle liftable, Roll tarp, can be stowed to the right, with central locking to the left, 2x rear LED work lights, SAF axles, Steel standing platform with anti-slip safety grating and guard rail, Hard chromed tipping cylinder, Rear folding underrun protection, 1x drop leg, Disc brakes, Broom and shovel holders mounted on the front wall, Air suspension, Swinging tailgate with mechanical 2-hook locking, Swinging rear/tailgate sealed with rubber gasket, Sidewall bolt locks, 1x grain chute, 1x left side toolbox, 1x front toolbox, Mudguards on all wheels, Loading area dimensions LxWxH: approx. 7,200 x 2,420 x 1,750 mm, Sidewall height: approx. 1,750 mm, Loading height: approx. 3,239 mm, Overall dimensions LxWxH: approx. 8,600 x 2,550 x 3,340 mm, Wheelbase: 3,100 x 1,310 x 1,320 mm, Tires: 385/65R 22.5 on aluminum rims, Tread depth left front: 14 mm, Tread depth left center: 14 mm, Tread depth left rear: 4 mm, Tread depth right front: 12 mm, Tread depth right center: 15 mm, Tread depth right rear: 12 mm, Tipping floor worn Additional Equipment: Overall length: approx. 8,600 mm, Overall width: approx. 2,550 mm, Overall height: approx. 3,340 mm, Internal body height: approx. 1,750 mm, Volume: approx. 30 m³, Fifth wheel height: approx. 1,200 mm, Neck height: approx. 190 mm, Cedpfjwr Ry Eex Aldogt King pin installation dimension: approx. 600 mm, Central telescopic support leg, Uncoupling with load not possible, when uncoupled, the vehicle must be parked with a rearward incline, Folding underrun protection, Half-shell mudguards, Tarp pole with bracket, Aluminum ladder approx. 3,550 mm, with side mounting bracket, SAF disc-braked axles, Air suspension, 1st axle with automatic lifting function, additionally can be operated electrically from the truck, with start assist function, does not require installation on the truck (start assist is functional up to 30% axle load exceedance and a maximum speed of 25 km/h), Spring-actuated parking brake, EBS—Electronic Braking System with EBS socket at the front, without connection cable, Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! 24 Volt, 4x 3-chamber rear lights + 1 round reversing light + 1 round rear fog light, all LED, 2 white position lights at the front, 1x 15-pin electrical socket at the front, without connection cable, Low-pressure cylinder max. 170 bar, with HDK screwed coupling, fixed part, NW 48 mm, Hard chromed tipping cylinder, Body: Aluminum box body made of high-quality, wear-resistant material, Sloped front wall 5 mm thick, With externally mounted cylinder, Side walls made of 30 mm hollow chamber profiles, cleanly welded, With anti-spill upper rail profile, Greenline – conical and aerodynamic body design, 'membrane' rear wall, Rear wall as swinging tailgate, external, with dual hook locking, Rear wall with additional side and bottom clamping bolts, Rear wall with rubber seal, Note! Heat resistant up to max. 170°C !, Central grain slider, Floor continuous 6 mm thick, Wear-resistant edges at the rear side walls,

Koşul: ikinci el, azami yük ağırlığı: 25.950 kg, toplam ağırlık: 31.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2017, bir sonraki muayene (TÜV): 03/2027, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.800 mm, yükleme alanı hacmi: 94 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2017, Donanım: ABS, 2-Axle Fliegl SZS 320 VIN: 2021450 Chassis / Attachments: * Air suspension // Raising and lowering * Jost landing gear * 2 x BPW Eco Plus axles with disc brakes Csdpfx Aey I Hb Djldsgt * Tyres: 385/65 R22.5 * Tread depth remaining: Front approx. 50/60%, Rear approx. 50/60% Body: * Standard Tautliner * Pallet stops on both sides * Edscha sliding roof * Side curtains * Multilock system Weights: * Gross weight: 31,000 kg * Unladen weight: 5,050 kg * Payload: 25,950 kg Other: * German vehicle * Main inspection & safety inspection valid until 09 / 2026 ---- New main inspections / safety inspections or GVW downgrading/upgrading available on request. We are happy to assist you with export/transfer license plates or the transfer of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for printing or typographical errors. Subject to change, prior sale, or error.---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. Our core strength is the sale of new and used commercial vehicles. On an area of 11,000 sqm, we offer a wide variety of vehicles. Our company philosophy is based on fairness and integrity. Customer satisfaction is particularly important to us, so we offer an excellent all-round service package and provide you with a knowledgeable contact person who supports you in purchasing or selling vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organizing special transports We can also help organize special transports for you. Temporary/export license plates We are happy to assist you in obtaining export or temporary license plates.

Koşul: ikinci el, boş ağırlık: 8.200 kg, azami yük ağırlığı: 30.000 kg, ilk tescil: 08/2009, lastik boyutu: 215/75/17,5, Üretim yılı: 2009, Dahili No. 0002 Görüş yalnızca randevu ile mümkündür - 40 km/h tescil - 80 km/h mümkün - Muayene geçerlilik süresi: 12/27'ye kadar - Basınçlı hava tankı yeni - Hava körüğü yeni - Amortisör yeni Codpeyy Th Uefx Aldogt Süspansiyon: • 1. dingil: Havalı süspansiyon • 2. dingil: Havalı süspansiyon • 3. dingil: Havalı süspansiyon • 4. dingil: Havalı süspansiyon Fren: • 1. dingil: Kampana • 2. dingil: Kampana • 3. dingil: Kampana yaylı akümülatör • 4. dingil: Kampana yaylı akümülatör Lastik donanımı: • 1. dingil: İkiz teker • 2. dingil: İkiz teker • 3. dingil: İkiz teker • 4. dingil: İkiz teker • Lastik ebatı: 215/75/17,5 • Diş derinliği %: 50 % • Jant türü: Çelik Diğer donanımlar • Boş ağırlık: 8.180 kg • Yük kapasitesi: 21.820 kg • Yükleme alanı: 20,53 m² • Yükleme hacmi: 61,58 m³ • ABS • EBS • Hidrolik kaldırılabilir tavan • Dingil sayısı: 4 • Dingil üreticisi: BPW • Stepne tutucu + stepne • Hidrolik rampa İç kasa ölçüleri yaklaşık: • Uzunluk: 8.050 mm • Genişlik: 2.550 mm • Yükseklik: 3.000 mm Ara satış, hata ve yazım hatası hakları saklıdır.

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902031174, boş ağırlık: 5.835 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2023, bir sonraki muayene (TÜV): 06/2026, yükleme alanı hacmi: 50 m³, toplam uzunluk: 10.300 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.740 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: gri, Üretim yılı: 2023, The images are archive photos. The vehicle may still be in use. Chassis – Tipper Semi-Trailer Fine-grain steel welded construction, in basic lightweight design, fifth wheel plate with replaceable 2" kingpin. Curved front wall "Patented" 24 t, two-speed landing gear, single-side operation, straight lower section, without load compensation. 2x wheel chocks with holders Aluminum side underrun protection Folding rear underrun protection 6x half-shell mudguards Integrated "mudguard holder" with stone-repellent surface Tarp support bar with holder 2x tow hooks at rear Axles & Suspension Cgodpfx Aey Efcueldjt BPW disc brake axles "Axle/chassis laser-aligned" for reduced tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and start assist, operated by triple brake application Brake System 2-line air pressure brake system Color-coded lines for easy servicing Spring-loaded parking brake 2 foolproof couplings at front, without connecting line EBS, Electronic Brake System with EBS socket at front, without connection cable Note: The trailer may only be towed by vehicles that can guarantee the effectiveness of ABS! With lifting & lowering valve Vehicle Stability Control System Wheels and Tyres 6x 385/65 R22.5" 6x steel rims Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white marker lights at front 2 white/red clearance lights at rear 2 x 7-pin and 1 x 15-pin foolproof sockets at front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm. (without hose connection) Body Aluminum box-type body made of high-quality, wear-resistant material. Sloped front wall, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent top rail. Inside fitted with access at the front wall. Shovel and broom holder on the outside of the front wall. Rear wall with pendulum mount, "double joint hinge," split 1/2 to 1/2 with two-wing door, top with swing-out support, each door with grain chute. Rear wall with rubber seal Continuous 6 mm floor Standing platform with access, connection plate for air/electricity and brake. Roll tarp stowable on the right-hand side, with central locking on the left-hand side. Operating Notes For transports of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to avoid corrosion damage. The specified gross weight is technically possible. Depending on the load type, the permissible axle/support/kingpin loads may restrict the achievable total weight. (Incorrect load distribution can cause poor handling and tracking.) Note: Not suitable for chemically aggressive materials (e.g., acids, chlorinated compounds, sulphur compounds, "refuse-derived fuels"). Such media, particularly on moist body surfaces, may lead to stress corrosion cracking and severe fractures in the body structure! Vehicles with tipper bodies are intended for non-aggressive loads. Use for transport of aggressive substances such as acids, bases, salts, fertilizers, sewage sludge, and domestic waste is at the owner's risk. This may result in stress crack or pitting corrosion damage. The images are archive photos!