Kullanılmış Müller-Mitteltal 11,9 To Tandemkippanh. Mit Agra Vorbereitung satın al (36.610)

Durum: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline ----Braking System: * Wabco EBS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: Lrodpfx Asq Euagjn Ton * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (up to 300 mm), with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ Tire Pressure Monitoring System * Multivoltage * 15-pin power connector * 12V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED rear lights ----General Attachments: * Manual landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox, right-hand side * Two-step entry at the front left (in direction of travel) * Bolted underrun protection * Plastic quarter mudguards ----Tipper Platform: * Mesh hooks on sides and rear at the central locking mounts, plus two on the front bulkhead * Steel platform superstructure, 3-way tipper (continuous side walls, without center stanchions, drop-down with tailgate spring assist, tailboard foldable and swinging via manual central locking) * 4 mm steel bed * Rear ramp mounting rail ----Load Securing: * One lashing point (5 t) in each corner * Four lashing rings (3 t each) recessed on each side into the outer frame ----Ramps: * One pair of aluminum approach ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for ramps recessed under the loading area in the chassis ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipper body, bulkhead, folding supports, and rear stanchions hot-dip galvanized * Axles, springs, air tank, flange eye and landing gear painted in black * Side panels painted in a RAL color of your choice (no special or metallic finishes); color can be changed up to approx. 6 weeks before completion ----Information: * Reinforced body with EN 12642 XL load securing certificate * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available from approx. calendar week 28 / 2026

Durum: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline ----Braking System: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalisation unit Lrodpol Thw Iofx An Ten ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * Multivoltage * 15-pin power connector * 12 V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED rear lights ----General Attachments: * Mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox on the right side * Two-step entry step at the front left (in driving direction) * Bolted underrun protection * Plastic quarter mudguards ----Tipper Body: * Net hooks on the sides and rear in the central locking bearing, plus 2 on the front wall * Steel pallet-3-way tipping body (continuous side walls, without centre stanchions, foldable with board wall spring assist, tailgate foldable and swinging via manual central locking) * 4 mm steel floor * Mounting rail at the rear for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading platform, recessed into the chassis at the rear ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipping body, front wall, folding supports and rear stanchions hot-dip galvanised * Axles, springs, air tanks, flange towing eye and landing gear painted black * Side walls painted in a custom RAL colour (no special or metallic finishes), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced body with EN 12642 XL load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available from approx. week 28 / 2026

Durum: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline: ----Braking System: * EBS brake system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding support legs at the rear * Toolbox made from galvanized sheet steel on the right side * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector Ledpfepk D D Uex An Tern * Bolt-on underrun protection with LED rear lights ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel * Hot-dip galvanized chassis * Fully galvanized steel three-way tipper body * Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors * Rear tailgate foldable and swinging via manual central locking * Hot-dip galvanized, bolted rear stanchion ----Load Securing: * 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame * 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks * Lockable rear storage compartment recessed in the chassis beneath the loading area ----Tyres: * 235/75 R 17.5 tires ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf, near the A7

Durum: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline: ----Braking System: * EBS brake system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: Lrsdpfx Aopk D Dmsn Tsn * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding support legs at the rear * Toolbox made from galvanized sheet steel on the right side * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * Bolt-on underrun protection with LED rear lights ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel * Hot-dip galvanized chassis * Fully galvanized steel three-way tipper body * Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors * Rear tailgate foldable and swinging via manual central locking * Hot-dip galvanized, bolted rear stanchion ----Load Securing: * 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame * 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks * Lockable rear storage compartment recessed in the chassis beneath the loading area ----Tyres: * 235/75 R 17.5 tires ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf, near the A7

Durum: yeni, azami yük ağırlığı: 8.670 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, * KA-TA-R 11.9 Masterline: Lredpfx Asq Hg Dxsn Tsn ----Brakes: * Wabco EBS * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Towing Eye: * Height-adjustable (300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting * 15-pin power connector ----General Attachments: * Galvanized sheet steel toolbox, right side-mounted * Bolted underrun protection * Plastic quarter mudguards * Jost mechanical landing leg at the front * Rear: 2 mechanical, hot-dip galvanized folding supports ----Tipper Body: * Mesh hooks on sides and rear in the central locking mounts, plus 3 additional on the front wall * Hot-dip galvanized chassis * Steel pallet three-way tipper body * Continuous, drop-side panels without central stanchion, folding with drop-side assist spring * Rear tailgate can be folded down or swung with manual central locking * Hot-dip galvanized, bolted rear stanchion * 4 mm steel floor plate * Rear ramp mounting rail ----Load Securing: * Each corner with 1 x 5 t recessed and foldable lashing ring * Additionally, 4 x 3 t foldable lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area, integrated into the chassis at the rear ----Tyres: * Tyres: 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar, and landing leg painted in black * Side panels painted in RAL 9010 pure white * Painting of the side panels in an RAL color of your choice available at extra charge * Floor and front wall hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 8.600 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, * KA-TA-R 11.9 Masterline: ----Braking System: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Drawbar Eye: * Height-adjustable, hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange drawbar eye ----Electrics / Lighting: * RDÜ tire monitoring system * LED lighting * 15-pin plug connector ----General Attachments: * Toolbox made of galvanized sheet steel, mounted on the right side * Bolt-on underrun protection * Quarter mudguards made of plastic * Jost mechanical landing gear at the front * Rear: 2 mechanical, hot-dip galvanized fold-down supports ----Tipper Body: * Net hooks on the sides and rear in the central locking mounts as well as 3 units on the front wall exterior * Hot-dip galvanized chassis * Steel platform, 3-way tipper body * Continuous side walls, drop-down without central stanchion, with drop-side spring assist * Tailgate, drop-down and swinging with manual central locking * Hot-dip galvanized bolted rear stanchion * 4 mm steel floor plate * Rear guide rail for drive-on ramps ----Load Securing: * 1 x 5 t recessed, folding lashing ring in each corner * 4 x 3 t recessed and folding lashing rings in the outer frame on each side ----Ramps: * 1 pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area, recessed into the chassis from the rear ----Tires: * Tires 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar, and landing gear painted in black tone * Drop-side paintwork in RAL 9010 pure white * Paint finish for side walls in any RAL color available at extra cost * Floor and front wall hot-dip galvanized Ljdpfxjv Dz N As An Tsrn ----Information: * Reinforced body with load securing certificate in accordance with EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flange towing eye ----General Attachments: * Jost support windlass at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox mounted front right on the front wall exterior ----Electrics / Lighting: * Tire pressure monitoring system (RDÜ) * LED lighting ----Loading Platform: * Platform length 6.27 m * Suitable for container transport * 50 mm softwood floor * Preparation in front of front wall for retrofitting container locks * Bolted front wall in smooth sheet steel * Drop-down, trapezoidal-profile steel side walls with sideboard spring assist * Steel rear wall, can be stowed between ramp holders when not in use, secured inside in front of the front wall * Rear staking pockets bolted ----Load Securing: * Perforated external frame, angled at approx. 45 degrees, with lashing capacity of 2 t every 480 mm * Optional installation of 3 t recessed lashing rings every 600 mm possible * In each corner (front and rear), 1 x 6.3 t lashing ring * Various holes in the front and rear carriers for 1.2 t lashing options ----Ramps: * One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear drive-up angle approx. 860 mm ----Tires: * Tires: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear accent and loading ramps * Board sides painted in RAL 9010 pure white * Optional painting of the side walls in another RAL color available at extra cost ----Information: * Subject to errors and prior sale * New vehicle with manufacturer's warranty Lodpfx Anjq Ra D Es Tern ----Delivery Time: * Available from week

Durum: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9: ----Braking System: Ledpfx Ajl Th Nrsn Tern * EBS brake system * Emergency release device for spring-actuated cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Towing Eye / Flange Tow Eye: * Towing bar adjustable in height by 300 mm * 40 mm flange tow eye ----General Attachments: * Jost landing gear front * Exterior folding support legs at the rear * Plastic toolbox, front right, mounted externally on the front wall * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform 5.37 m * 50 mm softwood floor * Bolted front wall made of smooth sheet metal * Drop sides made of trapezoidal-profiled steel, foldable with drop side spring assist * Steel rear wall, slide-in panel between ramp holders - stowed in front of the front wall when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, angled approx. 45 degrees with 2 t lashing capacity at 480 mm intervals * Option to equip with 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Approach slope at the rear approx. 860 mm chassis height ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, tailgate, folding supports, and access ramps hot-dip galvanized * Axles, springs, air tanks, 40 mm flange tow eye painted in black * Sideboard painted RAL2011 deep orange * Painting of side panels in any RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9: ----Braking System: Lsdpfxel Th Nco An Tern * EBS brake system * Emergency release system for spring brake cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Height-adjustable drawbar, 300 mm range * 40 mm flange towing eye ----General Attachments: * Jost landing gear at the front * External foldable support legs at the rear * Plastic toolbox, front right, mounted externally on the front bulkhead * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ (tyre pressure monitoring) * LED lighting ----Loading Platform: * Loading length 5.37 m * 50 mm softwood floor * Bolted front bulkhead made of smooth sheet steel * Drop sides made of trapezoidal profiled steel, foldable, with drop side spring assist * Rear wall made of steel, can be slid between the ramp holders forward of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * One 6.3 t lashing ring in each front and rear corner * Various holes in front and end crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical steel grating ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Approach slope at rear approx. 860 mm chassis height ----Tyres: * 235/75 R 17.5 tyres ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, bulkhead, tail gate, support legs, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flange towing eye painted black * Drop sides painted in RAL2011 deep orange * Sides can be painted in any RAL color at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex works Egestorf

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost landing gear at the front * External, hot-dip galvanized folding support legs at the rear * Plastic quarter mudguards * Plastic toolbox, front right, on the front wall exterior ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting Lredpfx Anjrvvfwo Tjn ----Loading Area: * Loading area length: 6.27 m * Suitable for container transport * 50 mm softwood flooring * Provision at the front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Drop-down trapezoidal steel side walls with fold-down spring-assisted gates * Steel rear wall can be slid between the ramp holders when not in use, stored inside in front of the front wall * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm * Option to fit 3 t drop lashing brackets every 600 mm * In each front and rear corner, 1 x 6.3 t lashing ring * Various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Tires: * Tires: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Painting: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear stanchions and ramps * Side wall paintwork in RAL 9010 pure white * Side wall paintwork in any RAL color available at extra cost ----Info: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: * available from calendar week

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * Drawbar with 300 mm adjustable height * 40 mm flanged towing eye ----General Attachments: * Jost mechanical landing gear at front * Externally mounted, hot-dip galvanized folding supports at rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted externally on the front wall ----Electrics / Lighting: Lrodpfxjl Thy Re An Ten * TPMS (Tire Pressure Monitoring System) * 15-pin electrical connector * LED tail lights ----Cargo Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted smooth sheet steel front wall * Drop sides made of trapezoidal steel sheet, foldable, with drop-side spring assist * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated external frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Option to install 3 t swing lashing rings every 600 mm (5 lashing rings mounted on each side) * One 6.3 t lashing ring in each of the four corners front and rear * Various holes in the front and rear crossmembers for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear access, storage compartment below loading platform integrated into the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall * Dropside colour in RAL 9010 pure white * Painting of sidewalls in an RAL colour at additional cost possible ----Information: * New vehicle, unregistered * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic brake system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Drawbar adjustable in height by approx. 300 mm * 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted exterior on bulkhead ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----Cargo Area: * 50 mm softwood floor * 20" container locks, mounted at front and rear * Bolted smooth sheet steel bulkhead * Drop-down trapezoidal profile steel side walls with spring-assisted wall lifters * Bolted, hot-dip galvanized rear stakes ----Load Securing: * Perforated outer frame, bent at approx. 45°, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing brackets every 600 mm (5 lashing rings fitted on each side) * 1 x 6.3 t lashing ring at each front and rear corner * Various boreholes in the bulkhead and rear cross-member for 1.2 t lashing options Lrsdsl Tilxopfx An Tjn ----Ramps: * 1 pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear-accessed storage compartment for ramps, integrated under the loading area within the chassis ----Paint / Finish: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Drop side color RAL 9010 pure white * Side wall painting in a RAL color of your choice available at extra cost ----Information: * New vehicle without registration * Subject to errors and prior sale ----Delivery Time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Braking System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye ----General Accessories: * Jost mechanical support winch at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic tool box, approx. 750 x 350 x 300 mm, mounted laterally on the right * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Body: * Mesh hooks on the side and rear at the central locking mounts, plus 2 on the front wall * Three-way steel pallet tipper body (continuous side walls – no center stanchions – can be folded down with board wall spring lifter) * Rear stanchions bolted * Combo steel wing doors, rear, 2-leaf, asymmetrically split, can pivot and lock up to 270°, not foldable, plus with additional swinging frame for automatic rear flap opening during tipping; locking via galvanized turn bar lock and central locking system * Deactivation function for automatic rear flap operation when tipping in reverse with the wing door open * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load Securing: Ljdpfx Aol Thyxon Tjrn * 1 x 5 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment accessible from the rear, recessed under the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper bed, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Painting of side walls in a different RAL color available at extra charge * Axles, springs, flange eye, air tanks, and support winch painted black ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle, unregistered, with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex Egestorf on the A7

Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps Lrodpfoxf Skpex An Ten ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Platform: * Mesh hooks on the sides and rear within the central locking mounts, plus 2 hooks on the front wall * Steel pallet three-way tipper body (continuous sidewalls – without intermediate stanchions – foldable, with tailgate spring assist) * Bolted rear stanchions * Combination steel double rear wing doors, asymmetrically split, 270° swing and lockable but not foldable, plus additional pendulum frame for automatic tailgate opening during tipping. Locking via galvanized locking bar and central locking. * Deactivation feature for automatic rear tailgate when tipping backward with an open wing door * 4 mm steel floor plate * Ramp rack at rear for drive-up ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing eyes on each side, integrated in the outer frame Lodjl Thymspfx An Tsrn ----Ramps: * 1 pair of aluminum drive-up ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment fitted underneath the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical drop legs: hot-dip galvanized * Sidewalls and tailgate: painted RAL 9010 pure white * Other RAL colors for sidewalls available at extra cost * Axles, springs, flange towing eye, air reservoirs, and landing leg: painted in black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, sold with manufacturer's warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf at the A7

Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear Lrjdpfx Anoxf Skvs Ton ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durum: yeni, azami yük ağırlığı: 8.900 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in B-dimension approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 removable LED beacon (incl. holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign packages front and rear * Landing gear at front * External folding rear supports * Plastic toolboxes approx. 750 x 350 x 300 mm on left and right sides * Side underrun protection * Rear underrun protection * Plastic quarter fenders ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable, locked dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) with an overall external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm Ljdpsy U A Eljfx An Tsrn * Installation of 3 t drop-lashing brackets possible every 600 mm – fitted with 5 x 3 t UVV lashing brackets on each side – * Each front and rear corner fitted with 1 x 6.3 t lashing ring (front just behind the container locks in the wooden floor, rear on the end member) * Various holes in the front and rear member for 1.2 t lashing options ----Ramps: * 1 pair of aluminium slide-in ramps, approx. 3,310 x 410 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Rear accessible storage compartment under the loading area integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front landing gear, and flange towing eye painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available from approx. week 38/2026

Durum: yeni, azami yük ağırlığı: 8.900 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Platform: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B-dimension approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 LED beacon (removable, incl. holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign sets front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each side left & right * Side underride protection * Rear underride guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable up to 3 m container outer width) and lockable, locking dimension retracted as per ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm ----Load Securing: * Perforated outer frame angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible - laterally, 5 x 3 t UVV lashing rings on each side installed * In each corner front and rear, 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end beam) * Various bores in the front and end beams for 1.2 t lashing points Lrodpfxey U A Efs An Tsn ----Ramps: * 1 pair of aluminum slot-in ramps approx. 3,310 x 410 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Rear stowage compartment integrated under the loading area in the chassis ----Coating: * ---Chassis, drawbar, front wall, underrun protection as well as rear supports hot-dip galvanized--- * Axles, air tanks, front support winch as well as flange drawbar eye painted in a black tone ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample pictures ----Delivery time: * Available from approx. week 38/2026

Durum: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, ETÜ-TA-R 19.0 ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar / Flange Drawbar Eye: Lrsdpfx Anjpk D D He Tsn * Drawbar with 50 mm flange drawbar eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Tool box made of galvanized sheet steel, approx. 650 x 350 x 320 mm, mounted right side, black powder-coated * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * Reinforcement package for drilling rig transport on the chassis – loading height + 20 mm * 50 mm softwood floor in clamped design * Preparation in front of front wall for retrofitting container locks * Front wall bolted, made from smooth sheet metal * Side walls made of profiled steel sheet – drop-down, with spring assistors * Rear wall, steel, slides between ramps – storage bracket in front of the front wall when not in use * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm * In each corner at the front and rear: 1 x 10 t lashing ring; various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be pushed together to 20 mm) * Rear approach slope approx. 860 mm ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a shade of black * Sideboard paintwork in RAL 9010 pure white * Side wall paintwork in a RAL color of your choice available at extra charge ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 21.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with raising and lowering system ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Lighting / Electrics: * 15-pin electrical connector * LED lights 12/24 V * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Preparation before the front wall and rear slope for retrofitting container locks for transporting 20" containers * Designed for 21 t GVW with reinforced frame and axles * Reinforcement package on the chassis for transporting drilling equipment * 50 mm softwood floor in clamped design * Front wall provided with preparation for retrofitting container locks * Bolted front wall made of smooth sheet steel * Split, fold-down side walls made of trapezoidal-profiled sheet steel with centrally mounted folding stanchion * Steel rear wall insertable between the ramps – storage bracket for unused panel inside at the front wall * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t retractable lashing rings every 600 mm * Profifix lashing rail centrally positioned along the longitudinal axis for securing options up to LC 3000 daN * 1 x 10 t lashing ring at each front and rear corner * Lashing package with 2 x 8 t flush-mounted lashing rings per side in the outer frame; various holes for 1.2 t lashing options in front and rear cross beams Ledpfx Asl Tihxen Tsrn ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (retractable to 20 mm) * Rear run-up angle approx. 860 mm from chassis ----Loading Heights: * Unladen approx. 940 mm * Laden approx. 910 mm ----Wheelbase / Tires: * 1,810 mm * Tires: 235/75R17.5 ----Painting: * Painting of the side walls in a RAL color of your choice (no special or metallic paints); can be changed up to approx. 6 weeks before completion * Drawbar, front wall, tailgate, folding supports, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images shown ----Delivery Time: * Available from week 29 / 2026

Durum: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 19.0: ----Braking System: * Wabco EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles Ljdpjl Th Hwjfx An Tjrn ----Suspension: * Parabolic springs - 110 mm wide - with tandem equalizing unit ----Drawbar / Flange Eye: Drawbar with 50 mm flange eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin power connector * LED rear lights * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear at front * Outward folding rear support legs * Side underrun protection * Plastic quarter mudguards ----Low-loader Deck: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Foldable, trapezoidal-profile steel side walls with drop-side lifting assist * Slide-in steel rear wall between the ramps (storage bracket at the front when not in use) * Screw-mounted rear stanchions ----Load Securing: * Perforated outer frame, angled approx. 45 degrees, with 2 t lashing points every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 10 t lashing ring at each front and rear corner; various holes in the front and rear crossmembers for 1.2 t lashing points * Profifix lashing rail centrally along the longitudinal axis for lashing loads up to LC 3,000 daN ----Ramps: * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be retracted to 20 mm) * Rear ramp approach angle approx. 860 mm ----Painting: * Chassis, drawbar, bulkhead, rear wall, loading ramps and folding supports hot-dip galvanized * Side walls painted in RAL 9010 pure white * Side wall painting in any RAL color available at extra charge * Axles, springs, air tanks, flange eye and landing gear painted black ----Info: * New vehicle with full manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Immediately available ex Egestorf on the A7

Durum: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-ER 19.0: ----Braking system: Ledpemi Tmaefx An Tern * Wabco EBS-E (electronic braking system) * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering facility ----Drawbar / Flange Drawbar Eye: * Drawbar with 50 mm flange drawbar eye and 110 mm height adjustment via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights 12 / 24 Volt ----General Attachments: * Jost landing leg at front * External folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped design * Fittings in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet * Split steel side walls, trapezoidal-profiled, foldable with folding stake in the center * Steel rear wall, slide-in between ramps (storage bracket for non-use inside in front of bulkhead) * Rear stakes bolted ----Load securing: * Perforated outer frame approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashings every 600 mm * Load securing package: in front and rear corners, each 1 x 10 t UVV-rated lashing point, each side 2 x 8 t UVV-rated lashing rings, retractable in outer frame; various holes for 1.2 t lashing option in front and rear cross members ----Ramps: * One-piece slide-in ramps, 12 t / pair, approx. 2,750 x 620 mm * Rear driving slope approx. 860 mm ----Loading height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, bulkhead, rear gate, folding supports, and loading ramps hot-dip galvanized * ---Axles, air tanks, flange drawbar eye, and landing leg painted in black shade--- * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted / subject to change ----Delivery time: * Immediately available from Egestorf

Durum: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Braking System: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange Tow Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange tow eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED lighting ----General Attachments: * Landing gear at the front * Fold-out stabilizer legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside at the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * At the front bulkhead and rear incline, provision for retrofitting container locks for transporting 20'' containers * Bolted bulkhead made of smooth sheet metal * Drop-side walls made of trapezoidal steel sheet, central split, folding * Steel rear wall - insertable between the ramp mounts, can be stowed inside at the front bulkhead when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each corner, front and rear * Various holes in the front and end cross-members for 1.2 t lashing options * Profifix lashing rail, centrally along longitudinal axis, for securing up to LC 3000 daN ----Ramps: * One-piece mechanical mesh ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be closed to 20 mm) * Rear approach angle, approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 Lrodpfx Ajv Eq Evon Tsn ----Paintwork: * Drawbar, bulkhead, rear flap, folding legs, and ramps hot-dip galvanized * Axles, springs, air tanks, flange tow eye and landing gear painted black * Side walls painted to RAL color of choice (excluding special or metallic colors), changeable up to approx. 6 weeks before completion ----Information: * Reinforced and certified body according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 30 / 2026

Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12/24 V * 15-pin socket ----General Attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the front wall * Side underrun protection * Plastic quarter mudguards Lrsdeq Dyvyspfx An Ten ----Low Loader Bed: * 50 mm softwood flooring * Fitting for retrofitting container locks in front of the front wall * Bolted front wall made from smooth steel sheet * Side walls made from profiled sheet steel, foldable with drop-side spring assistance * Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use * Rear stakes bolted * Beveled rear drive-on angle approx. 860 mm ----Load Securing: * Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing eye at each front and rear corner * Various holes in front and rear cross-member for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps * Drop-side color in RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra charge ----Information: * -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate -- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (Electronic Braking System) Lredpfx Anevin Uco Ten * Emergency release device for spring-actuated cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including Run-on-Release (RtR) valve and manual lowering for loading operations ----Drawbar / Towing Eye: * Drawbar with positive-lock height adjustment * 50 mm flange towing eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12/24 V integrated into underride guard ----General Attachments: * Front support winch * External folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipper Body: * Steel platform – 3-way tipper body made of fine-grained steel with reinforced "M-Strong" high sideboards and reinforced 180 bar tipping cylinder * Fixed front bulkhead made of smooth steel sheet * Hardwood pad for excavator bucket, bolted to the front bulkhead * Continuous side walls – without center stanchion – folding, with sidewall spring assist and swaying function via manual central locking * Rear posts bolted * Combination steel swing rear doors – two-leaf, asymmetrically split, can be swung open 270° and locked in place (not fold-down), with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bar lock and central locking; deactivation function for automatic rear wall opening when tipping backwards with open swing door * 4 mm steel floor plating * Two-step entry on front left side * Mounting rail at rear for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t recessed lashing rings on each side in outer frame ----Loading Ramps: * Recessed compartment for ramps at the rear of the chassis * 1 pair of aluminum loading ramps (10 t/pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear posts, front bulkhead, tipper body, underrun protection, folding rear supports hot-dip galvanized * Sideboards painted in a RAL color of choice (no special or metallic paints); can be changed up to approx. 6 weeks prior to completion * Axles, air tanks, flange towing eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026