Kullanılmış Müller-Mitteltal 11,9 To Tandemkippanh. Mit Anlegerampen satın al (37.306)

Durum: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline: ----Braking System: * EBS brake system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit Kedjpk D D Ujpfx Ad Islu ----Drawbar / Flange Towing Eye: * Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding support legs at the rear * Toolbox made from galvanized sheet steel on the right side * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * Bolt-on underrun protection with LED rear lights ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel * Hot-dip galvanized chassis * Fully galvanized steel three-way tipper body * Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors * Rear tailgate foldable and swinging via manual central locking * Hot-dip galvanized, bolted rear stanchion ----Load Securing: * 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame * 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks * Lockable rear storage compartment recessed in the chassis beneath the loading area ----Tyres: * 235/75 R 17.5 tires ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf, near the A7

Durum: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline: ----Braking System: * EBS brake system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding support legs at the rear * Toolbox made from galvanized sheet steel on the right side * Plastic quarter mudguards Kljdpopk D Dmjfx Ad Iju ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * Bolt-on underrun protection with LED rear lights ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel * Hot-dip galvanized chassis * Fully galvanized steel three-way tipper body * Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors * Rear tailgate foldable and swinging via manual central locking * Hot-dip galvanized, bolted rear stanchion ----Load Securing: * 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame * 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks * Lockable rear storage compartment recessed in the chassis beneath the loading area ----Tyres: * 235/75 R 17.5 tires ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf, near the A7

Durum: yeni, azami yük ağırlığı: 8.670 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, * KA-TA-R 11.9 Masterline: ----Brakes: * Wabco EBS * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: Klodpfx Aeq Hg Dxsd Ieu * Parabolic springs with tandem equalization unit ----Drawbar / Flange Towing Eye: * Height-adjustable (300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting * 15-pin power connector ----General Attachments: * Galvanized sheet steel toolbox, right side-mounted * Bolted underrun protection * Plastic quarter mudguards * Jost mechanical landing leg at the front * Rear: 2 mechanical, hot-dip galvanized folding supports ----Tipper Body: * Mesh hooks on sides and rear in the central locking mounts, plus 3 additional on the front wall * Hot-dip galvanized chassis * Steel pallet three-way tipper body * Continuous, drop-side panels without central stanchion, folding with drop-side assist spring * Rear tailgate can be folded down or swung with manual central locking * Hot-dip galvanized, bolted rear stanchion * 4 mm steel floor plate * Rear ramp mounting rail ----Load Securing: * Each corner with 1 x 5 t recessed and foldable lashing ring * Additionally, 4 x 3 t foldable lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area, integrated into the chassis at the rear ----Tyres: * Tyres: 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar, and landing leg painted in black * Side panels painted in RAL 9010 pure white * Painting of the side panels in an RAL color of your choice available at extra charge * Floor and front wall hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 8.600 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, * KA-TA-R 11.9 Masterline: ----Braking System: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Drawbar Eye: Kljdpfx Adjv Dz N As Ieu * Height-adjustable, hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange drawbar eye ----Electrics / Lighting: * RDÜ tire monitoring system * LED lighting * 15-pin plug connector ----General Attachments: * Toolbox made of galvanized sheet steel, mounted on the right side * Bolt-on underrun protection * Quarter mudguards made of plastic * Jost mechanical landing gear at the front * Rear: 2 mechanical, hot-dip galvanized fold-down supports ----Tipper Body: * Net hooks on the sides and rear in the central locking mounts as well as 3 units on the front wall exterior * Hot-dip galvanized chassis * Steel platform, 3-way tipper body * Continuous side walls, drop-down without central stanchion, with drop-side spring assist * Tailgate, drop-down and swinging with manual central locking * Hot-dip galvanized bolted rear stanchion * 4 mm steel floor plate * Rear guide rail for drive-on ramps ----Load Securing: * 1 x 5 t recessed, folding lashing ring in each corner * 4 x 3 t recessed and folding lashing rings in the outer frame on each side ----Ramps: * 1 pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area, recessed into the chassis from the rear ----Tires: * Tires 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar, and landing gear painted in black tone * Drop-side paintwork in RAL 9010 pure white * Paint finish for side walls in any RAL color available at extra cost * Floor and front wall hot-dip galvanized ----Information: * Reinforced body with load securing certificate in accordance with EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline ----Braking System: * Wabco EBS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (up to 300 mm), with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ Tire Pressure Monitoring System * Multivoltage * 15-pin power connector * 12V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED rear lights ----General Attachments: * Manual landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox, right-hand side * Two-step entry at the front left (in direction of travel) * Bolted underrun protection * Plastic quarter mudguards ----Tipper Platform: * Mesh hooks on sides and rear at the central locking mounts, plus two on the front bulkhead * Steel platform superstructure, 3-way tipper (continuous side walls, without center stanchions, drop-down with tailgate spring assist, tailboard foldable and swinging via manual central locking) * 4 mm steel bed * Rear ramp mounting rail ----Load Securing: * One lashing point (5 t) in each corner * Four lashing rings (3 t each) recessed on each side into the outer frame ----Ramps: * One pair of aluminum approach ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for ramps recessed under the loading area in the chassis ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipper body, bulkhead, folding supports, and rear stanchions hot-dip galvanized * Axles, springs, air tank, flange eye and landing gear painted in black * Side panels painted in a RAL color of your choice (no special or metallic finishes); color can be changed up to approx. 6 weeks before completion ----Information: * Reinforced body with EN 12642 XL load securing certificate * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images ----Delivery Time: Ksdpfxoq Euage Ad Iolu * Available from approx. calendar week 28 / 2026

Durum: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline ----Braking System: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalisation unit Klodpfol Thw Iox Ad Iju ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * Multivoltage * 15-pin power connector * 12 V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED rear lights ----General Attachments: * Mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox on the right side * Two-step entry step at the front left (in driving direction) * Bolted underrun protection * Plastic quarter mudguards ----Tipper Body: * Net hooks on the sides and rear in the central locking bearing, plus 2 on the front wall * Steel pallet-3-way tipping body (continuous side walls, without centre stanchions, foldable with board wall spring assist, tailgate foldable and swinging via manual central locking) * 4 mm steel floor * Mounting rail at the rear for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading platform, recessed into the chassis at the rear ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipping body, front wall, folding supports and rear stanchions hot-dip galvanised * Axles, springs, air tanks, flange towing eye and landing gear painted black * Side walls painted in a custom RAL colour (no special or metallic finishes), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced body with EN 12642 XL load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available from approx. week 28 / 2026

Durum: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release device for spring-actuated cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: Ksdpjl Th Nrsfx Ad Iolu * Parabolic springs with equalizing unit ----Towing Eye / Flange Tow Eye: * Towing bar adjustable in height by 300 mm * 40 mm flange tow eye ----General Attachments: * Jost landing gear front * Exterior folding support legs at the rear * Plastic toolbox, front right, mounted externally on the front wall * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform 5.37 m * 50 mm softwood floor * Bolted front wall made of smooth sheet metal * Drop sides made of trapezoidal-profiled steel, foldable with drop side spring assist * Steel rear wall, slide-in panel between ramp holders - stowed in front of the front wall when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, angled approx. 45 degrees with 2 t lashing capacity at 480 mm intervals * Option to equip with 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Approach slope at the rear approx. 860 mm chassis height ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, tailgate, folding supports, and access ramps hot-dip galvanized * Axles, springs, air tanks, 40 mm flange tow eye painted in black * Sideboard painted RAL2011 deep orange * Painting of side panels in any RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release system for spring brake cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Height-adjustable drawbar, 300 mm range * 40 mm flange towing eye ----General Attachments: * Jost landing gear at the front * External foldable support legs at the rear * Plastic toolbox, front right, mounted externally on the front bulkhead * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ (tyre pressure monitoring) * LED lighting ----Loading Platform: * Loading length 5.37 m * 50 mm softwood floor * Bolted front bulkhead made of smooth sheet steel * Drop sides made of trapezoidal profiled steel, foldable, with drop side spring assist * Rear wall made of steel, can be slid between the ramp holders forward of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: Klsdpfel Th Ncjx Ad Iju * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * One 6.3 t lashing ring in each front and rear corner * Various holes in front and end crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical steel grating ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Approach slope at rear approx. 860 mm chassis height ----Tyres: * 235/75 R 17.5 tyres ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, bulkhead, tail gate, support legs, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flange towing eye painted black * Drop sides painted in RAL2011 deep orange * Sides can be painted in any RAL color at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex works Egestorf

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flange towing eye ----General Attachments: * Jost support windlass at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox mounted front right on the front wall exterior ----Electrics / Lighting: * Tire pressure monitoring system (RDÜ) * LED lighting ----Loading Platform: * Platform length 6.27 m * Suitable for container transport * 50 mm softwood floor * Preparation in front of front wall for retrofitting container locks * Bolted front wall in smooth sheet steel * Drop-down, trapezoidal-profile steel side walls with sideboard spring assist * Steel rear wall, can be stowed between ramp holders when not in use, secured inside in front of the front wall * Rear staking pockets bolted ----Load Securing: * Perforated external frame, angled at approx. 45 degrees, with lashing capacity of 2 t every 480 mm * Optional installation of 3 t recessed lashing rings every 600 mm possible * In each corner (front and rear), 1 x 6.3 t lashing ring * Various holes in the front and rear carriers for 1.2 t lashing options ----Ramps: * One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear drive-up angle approx. 860 mm Kjdpfjq Ra D Eex Ad Iolu ----Tires: * Tires: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear accent and loading ramps * Board sides painted in RAL 9010 pure white * Optional painting of the side walls in another RAL color available at extra cost ----Information: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery Time: * Available from week

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost landing gear at the front * External, hot-dip galvanized folding support legs at the rear * Plastic quarter mudguards * Plastic toolbox, front right, on the front wall exterior ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting ----Loading Area: * Loading area length: 6.27 m * Suitable for container transport * 50 mm softwood flooring * Provision at the front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Drop-down trapezoidal steel side walls with fold-down spring-assisted gates * Steel rear wall can be slid between the ramp holders when not in use, stored inside in front of the front wall * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm * Option to fit 3 t drop lashing brackets every 600 mm * In each front and rear corner, 1 x 6.3 t lashing ring * Various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Tires: * Tires: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Painting: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear stanchions and ramps * Side wall paintwork in RAL 9010 pure white * Side wall paintwork in any RAL color available at extra cost Kljdpfx Adjrvvfwo Iju ----Info: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: * available from calendar week

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * Drawbar with 300 mm adjustable height * 40 mm flanged towing eye ----General Attachments: * Jost mechanical landing gear at front * Externally mounted, hot-dip galvanized folding supports at rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted externally on the front wall ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin electrical connector * LED tail lights ----Cargo Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted smooth sheet steel front wall * Drop sides made of trapezoidal steel sheet, foldable, with drop-side spring assist * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated external frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Option to install 3 t swing lashing rings every 600 mm (5 lashing rings mounted on each side) * One 6.3 t lashing ring in each of the four corners front and rear * Various holes in the front and rear crossmembers for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear access, storage compartment below loading platform integrated into the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall * Dropside colour in RAL 9010 pure white * Painting of sidewalls in an RAL colour at additional cost possible ----Information: * New vehicle, unregistered * Subject to errors and prior sale ----Delivery Time: Kedjl Thy Ropfx Ad Ielu * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic brake system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Drawbar adjustable in height by approx. 300 mm * 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted exterior on bulkhead ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----Cargo Area: * 50 mm softwood floor * 20" container locks, mounted at front and rear * Bolted smooth sheet steel bulkhead * Drop-down trapezoidal profile steel side walls with spring-assisted wall lifters * Bolted, hot-dip galvanized rear stakes ----Load Securing: * Perforated outer frame, bent at approx. 45°, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing brackets every 600 mm (5 lashing rings fitted on each side) * 1 x 6.3 t lashing ring at each front and rear corner Kedpjl Tilxefx Ad Islu * Various boreholes in the bulkhead and rear cross-member for 1.2 t lashing options ----Ramps: * 1 pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear-accessed storage compartment for ramps, integrated under the loading area within the chassis ----Paint / Finish: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Drop side color RAL 9010 pure white * Side wall painting in a RAL color of your choice available at extra cost ----Information: * New vehicle without registration * Subject to errors and prior sale ----Delivery Time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Braking System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye Ksdjl Thyxspfx Ad Ielu ----General Accessories: * Jost mechanical support winch at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic tool box, approx. 750 x 350 x 300 mm, mounted laterally on the right * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Body: * Mesh hooks on the side and rear at the central locking mounts, plus 2 on the front wall * Three-way steel pallet tipper body (continuous side walls – no center stanchions – can be folded down with board wall spring lifter) * Rear stanchions bolted * Combo steel wing doors, rear, 2-leaf, asymmetrically split, can pivot and lock up to 270°, not foldable, plus with additional swinging frame for automatic rear flap opening during tipping; locking via galvanized turn bar lock and central locking system * Deactivation function for automatic rear flap operation when tipping in reverse with the wing door open * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment accessible from the rear, recessed under the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper bed, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Painting of side walls in a different RAL color available at extra charge * Axles, springs, flange eye, air tanks, and support winch painted black ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle, unregistered, with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex Egestorf on the A7

Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel Kodpfx Adjxf Skpj Islu ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Platform: * Mesh hooks on the sides and rear within the central locking mounts, plus 2 hooks on the front wall * Steel pallet three-way tipper body (continuous sidewalls – without intermediate stanchions – foldable, with tailgate spring assist) * Bolted rear stanchions * Combination steel double rear wing doors, asymmetrically split, 270° swing and lockable but not foldable, plus additional pendulum frame for automatic tailgate opening during tipping. Locking via galvanized locking bar and central locking. * Deactivation feature for automatic rear tailgate when tipping backward with an open wing door * 4 mm steel floor plate * Ramp rack at rear for drive-up ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing eyes on each side, integrated in the outer frame ----Ramps: * 1 pair of aluminum drive-up ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment fitted underneath the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical drop legs: hot-dip galvanized * Sidewalls and tailgate: painted RAL 9010 pure white * Other RAL colors for sidewalls available at extra cost * Axles, springs, flange towing eye, air reservoirs, and landing leg: painted in black Klodpfx Ajl Thymod Iju ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, sold with manufacturer's warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf at the A7

Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards Klsdpfxoxf Skvo Ad Ieu * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durum: yeni, azami yük ağırlığı: 8.900 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles Klsdpfx Aoy U A Eled Ieu ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in B-dimension approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 removable LED beacon (incl. holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign packages front and rear * Landing gear at front * External folding rear supports * Plastic toolboxes approx. 750 x 350 x 300 mm on left and right sides * Side underrun protection * Rear underrun protection * Plastic quarter fenders ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable, locked dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) with an overall external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t drop-lashing brackets possible every 600 mm – fitted with 5 x 3 t UVV lashing brackets on each side – * Each front and rear corner fitted with 1 x 6.3 t lashing ring (front just behind the container locks in the wooden floor, rear on the end member) * Various holes in the front and rear member for 1.2 t lashing options ----Ramps: * 1 pair of aluminium slide-in ramps, approx. 3,310 x 410 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Rear accessible storage compartment under the loading area integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front landing gear, and flange towing eye painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available from approx. week 38/2026

Durum: yeni, azami yük ağırlığı: 8.900 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Platform: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B-dimension approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 LED beacon (removable, incl. holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign sets front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each side left & right * Side underride protection * Rear underride guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable up to 3 m container outer width) and lockable, locking dimension retracted as per ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm ----Load Securing: * Perforated outer frame angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible - laterally, 5 x 3 t UVV lashing rings on each side installed * In each corner front and rear, 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end beam) * Various bores in the front and end beams for 1.2 t lashing points ----Ramps: Kedey U A Efspfx Ad Iolu * 1 pair of aluminum slot-in ramps approx. 3,310 x 410 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Rear stowage compartment integrated under the loading area in the chassis ----Coating: * ---Chassis, drawbar, front wall, underrun protection as well as rear supports hot-dip galvanized--- * Axles, air tanks, front support winch as well as flange drawbar eye painted in a black tone ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample pictures ----Delivery time: * Available from approx. week 38/2026

Durum: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Braking System: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange Tow Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange tow eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector Klodpfx Asv Eq Evod Iou * LED lighting ----General Attachments: * Landing gear at the front * Fold-out stabilizer legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside at the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * At the front bulkhead and rear incline, provision for retrofitting container locks for transporting 20'' containers * Bolted bulkhead made of smooth sheet metal * Drop-side walls made of trapezoidal steel sheet, central split, folding * Steel rear wall - insertable between the ramp mounts, can be stowed inside at the front bulkhead when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each corner, front and rear * Various holes in the front and end cross-members for 1.2 t lashing options * Profifix lashing rail, centrally along longitudinal axis, for securing up to LC 3000 daN ----Ramps: * One-piece mechanical mesh ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be closed to 20 mm) * Rear approach angle, approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 ----Paintwork: * Drawbar, bulkhead, rear flap, folding legs, and ramps hot-dip galvanized * Axles, springs, air tanks, flange tow eye and landing gear painted black * Side walls painted to RAL color of choice (excluding special or metallic colors), changeable up to approx. 6 weeks before completion ----Information: * Reinforced and certified body according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 30 / 2026

Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12/24 V * 15-pin socket ----General Attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood flooring * Fitting for retrofitting container locks in front of the front wall * Bolted front wall made from smooth steel sheet * Side walls made from profiled sheet steel, foldable with drop-side spring assistance * Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use * Rear stakes bolted * Beveled rear drive-on angle approx. 860 mm ----Load Securing: * Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing eye at each front and rear corner * Various holes in front and rear cross-member for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps * Drop-side color in RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra charge ----Information: Kledpoq Dyvyefx Ad Isu * -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate -- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: Klsdpovin Ucofx Ad Iju ----Braking System: * EBS (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including Run-on-Release (RtR) valve and manual lowering for loading operations ----Drawbar / Towing Eye: * Drawbar with positive-lock height adjustment * 50 mm flange towing eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12/24 V integrated into underride guard ----General Attachments: * Front support winch * External folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipper Body: * Steel platform – 3-way tipper body made of fine-grained steel with reinforced "M-Strong" high sideboards and reinforced 180 bar tipping cylinder * Fixed front bulkhead made of smooth steel sheet * Hardwood pad for excavator bucket, bolted to the front bulkhead * Continuous side walls – without center stanchion – folding, with sidewall spring assist and swaying function via manual central locking * Rear posts bolted * Combination steel swing rear doors – two-leaf, asymmetrically split, can be swung open 270° and locked in place (not fold-down), with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bar lock and central locking; deactivation function for automatic rear wall opening when tipping backwards with open swing door * 4 mm steel floor plating * Two-step entry on front left side * Mounting rail at rear for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t recessed lashing rings on each side in outer frame ----Loading Ramps: * Recessed compartment for ramps at the rear of the chassis * 1 pair of aluminum loading ramps (10 t/pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear posts, front bulkhead, tipper body, underrun protection, folding rear supports hot-dip galvanized * Sideboards painted in a RAL color of choice (no special or metallic paints); can be changed up to approx. 6 weeks prior to completion * Axles, air tanks, flange towing eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Durum: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, return-to-ride (RtR) valve, and manual lowering for loading operations Klodsvin T Sjpfx Ad Ieu ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED rear lights 12/24 V mounted in underride guard ----General Attachments: * Landing leg at the front * External folding supports at the rear * Plastic toolbox – approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet – 3-way tipper body made from high-strength fine-grained steel with high M-Strong sideboards and reinforced 180 bar tipping cylinder * Fixed front wall made from smooth steel sheet * Hardwood board for excavator bucket, bolted to front wall * Continuous side walls – folding, without central stanchion, with sideboard spring lifts and swinging via manual central locking * Screw-on rear stanchions * Combination steel rear swing doors – two asymmetrically split doors, swiveling and lockable up to 270°, non-folding, with additional swing frame for automatic rear door opening during tipping, locking via galvanized rotary bar and central locking system, deactivation function for automatic rear door opening when tipping backwards with open swing doors * 4 mm steel floor * Two-step access on front left * Mounting rail at rear for loading ramps ----Load Securing: * One 7-tonne lashing ring in each corner * Four 3-tonne lashing points recessed per side into the outer frame ----Loading Ramps: * Receiving chamber for loading ramps recessed in chassis at the rear * One pair of aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipper body, underrun guard, rear folding supports hot-dip galvanized * Sideboard painting in a RAL colour of choice (except for special or metallic paints), can be changed up to approx. 6 weeks prior to completion * Axles, air tanks, flange drawbar eye, and front landing leg painted in black ----Information: * -- Load securing certificate in accordance with EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flanged towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flanged towing eye ----Lighting / Electrics: * RDÜ (Tire Pressure Monitoring System) * LED taillights 12/24 V * 15-pin electric connector ----General Attachments: * Jost landing gear at front * External hot-dip galvanized folding support legs at rear * Plastic toolbox, front right outside on front wall * Side underrun protection * Plastic quarter mudguards ----Low-bed loading area: * 50 mm softwood floor * Preparation in front of bulkhead for later installation of container locks * Bolt-on smooth steel front wall * Side walls made of trapezoidal steel sheet, foldable, with drop side lifting device * Steel rear wall, insertable between ramp mounts; when not in use, stored inside in front of bulkhead * Bolt-on rear stanchions * Rear approach angle approx. 860 mm ----Load securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Provision for fitting 3 t lashing rings every 600 mm * In each corner at front and rear: 1 x 6.3 t lashing ring * Various drilled holes for 1.2 t lashing points in front and rear crossmembers ----Ramps: * One-piece mechanical grid ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (collapsible to 20 mm width) ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, tailgate, and ramps * Drop side color in RAL 9010 pure white Kedpfx Ajpk Dv Red Iolu * Painting of side walls in a RAL color of your choice available at extra cost ----Info: * --Reinforced and certified body according to EN 12642 XL, including load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox installed on the right front exterior of the bulkhead * Side underrun protection * Plastic quarter mudguards Kodpfx Adsxglibe Ielu ----Low loader platform: * 50 mm softwood flooring * Prepared fixture in front of the bulkhead for later installation of container locks * Bolt-on bulkhead made from flat sheet steel * Drop-down side panels made from trapezoidal steel sheets with sideboard spring assist * Steel rear panel can be inserted between ramps – storage holder provided inside the bulkhead when not in use * Rear stanchions bolted ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashings every 600 mm * In the corners (front and rear), each fitted with 1 x 6.3 t lashing ring * Various drill holes in the bulkhead and end cross member for additional lashing points at 1.2 t ----Ramps: * One-piece mechanical mesh ramps with spring assist for one-person operation, approx. 2,750 x 600 mm (can be retracted to 20 mm thickness) * Rear approach angle approx. 860 mm ----Painting: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear panel * Side panel color in RAL 9010 pure white * Side panel painting in another RAL color available at extra cost ----Information: * --Reinforced and certified bodywork according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available from approx. CW 30/2026

Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Braking system: * Drum brakes * Electronic braking system (EBS) Ksdpfxjxglh Rs Ad Iolu * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange drawbar eye: * Drawbar adjustable in height by approx. 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tyre Pressure Monitoring System) * LED lighting ----General attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox on the front right outside of the front wall * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Preparation in front of the front wall for subsequent installation of container locks * Bolted front wall made of smooth sheet metal * Drop sides made of trapezoidal sheet steel, foldable with side board spring lifter * Rear wall made of steel, slidable between the ramps – storage bracket inside front wall when not in use * Removable rear stanchions (bolted) ----Load securing: * Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various mounting holes in front crossmember and rear end carrier for 1.2 t lashing points ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be nested up to 20 mm) * Rear approach slope approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, ramps, and rear wall * Platform side wall color in RAL 9010 pure white * Painting of the side walls in any RAL color available at extra cost ----Info: * --Reinforced and certified structure according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 30/2026