Kullanılmış Müller-Mitteltal 11,9 To Tandemtiefl. 5,37 Mtr Mit Auffahrrampen satın al (36.549)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL11,9 to Tandemtiefl. 5,37 mtr mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9:
----Braking System:
* EBS brake system
* Emergency release device for spring-actuated cylinders
* Drum brakes, 2 x 5.5 t
----Axles:
Nodpfx Ajl Th Nrsldowh
* Gigant axles
----Suspension:
* Parabolic springs with equalizing unit
----Towing Eye / Flange Tow Eye:
* Towing bar adjustable in height by 300 mm
* 40 mm flange tow eye
----General Attachments:
* Jost landing gear front
* Exterior folding support legs at the rear
* Plastic toolbox, front right, mounted externally on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----Loading Platform:
* Loading platform 5.37 m
* 50 mm softwood floor
* Bolted front wall made of smooth sheet metal
* Drop sides made of trapezoidal-profiled steel, foldable with drop side spring assist
* Steel rear wall, slide-in panel between ramp holders - stowed in front of the front wall when not in use
* Rear stakes bolted
----Load Securing:
* Perforated outer frame, angled approx. 45 degrees with 2 t lashing capacity at 480 mm intervals
* Option to equip with 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each of the front and rear corners
* Various holes for 1.2 t lashing options in the front and rear crossmembers
----Ramps:
* One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm)
* Approach slope at the rear approx. 860 mm chassis height
----Tyres:
* Tyres 235/75 R 17.5
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
* Drawbar, front wall, tailgate, folding supports, and access ramps hot-dip galvanized
* Axles, springs, air tanks, 40 mm flange tow eye painted in black
* Sideboard painted RAL2011 deep orange
* Painting of side panels in any RAL color available at extra cost
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemtiefl. 5,37 mtr mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9:
----Braking System:
* EBS brake system
* Emergency release system for spring brake cylinders
* Drum brakes, 2 x 5.5 t
----Axles:
* Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Eye:
* Height-adjustable drawbar, 300 mm range
* 40 mm flange towing eye
----General Attachments:
* Jost landing gear at the front
* External foldable support legs at the rear
* Plastic toolbox, front right, mounted externally on the front bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
Nwjdpol Th Ncofx Aldeh
* RDÜ (tyre pressure monitoring)
* LED lighting
----Loading Platform:
* Loading length 5.37 m
* 50 mm softwood floor
* Bolted front bulkhead made of smooth sheet steel
* Drop sides made of trapezoidal profiled steel, foldable, with drop side spring assist
* Rear wall made of steel, can be slid between the ramp holders forward of the bulkhead when not in use
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* One 6.3 t lashing ring in each front and rear corner
* Various holes in front and end crossmembers for 1.2 t lashing options
----Ramps:
* One-piece mechanical steel grating ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm)
* Approach slope at rear approx. 860 mm chassis height
----Tyres:
* 235/75 R 17.5 tyres
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
* Drawbar, bulkhead, tail gate, support legs, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, and 40 mm flange towing eye painted black
* Drop sides painted in RAL2011 deep orange
* Sides can be painted in any RAL color at extra cost
----Information:
* New vehicle with manufacturer's warranty
* Subject to prior sale and errors
----Delivery Time:
* Available immediately ex works Egestorf
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL11,9 to Tandemtieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9:
----Braking System:
* EBS braking system
* Emergency release device for spring-actuated cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
Nwedpsq Ra D Ejfx Aldeh
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar (adjustable by 300 mm)
* 40 mm flange towing eye
----General Attachments:
* Jost support windlass at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic quarter mudguards
* Plastic toolbox mounted front right on the front wall exterior
----Electrics / Lighting:
* Tire pressure monitoring system (RDÜ)
* LED lighting
----Loading Platform:
* Platform length 6.27 m
* Suitable for container transport
* 50 mm softwood floor
* Preparation in front of front wall for retrofitting container locks
* Bolted front wall in smooth sheet steel
* Drop-down, trapezoidal-profile steel side walls with sideboard spring assist
* Steel rear wall, can be stowed between ramp holders when not in use, secured inside in front of the front wall
* Rear staking pockets bolted
----Load Securing:
* Perforated external frame, angled at approx. 45 degrees, with lashing capacity of 2 t every 480 mm
* Optional installation of 3 t recessed lashing rings every 600 mm possible
* In each corner (front and rear), 1 x 6.3 t lashing ring
* Various holes in the front and rear carriers for 1.2 t lashing options
----Ramps:
* One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
* Rear drive-up angle approx. 860 mm
----Tires:
* Tires: 235/75R17.5
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
* Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear accent and loading ramps
* Board sides painted in RAL 9010 pure white
* Optional painting of the side walls in another RAL color available at extra cost
----Information:
* Subject to errors and prior sale
* New vehicle with manufacturer's warranty
----Delivery Time:
* Available from week
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking System:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizer unit
----Drawbar / Flange Tow Eye:
* Drawbar height-adjustable by 300 mm
* Drawbar extension by 250 mm up to 2,250 mm
* 40 mm flange tow eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin power connector
* LED lighting
----General Attachments:
* Landing gear at the front
* Fold-out stabilizer legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside at the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* At the front bulkhead and rear incline, provision for retrofitting container locks for transporting 20'' containers
* Bolted bulkhead made of smooth sheet metal
* Drop-side walls made of trapezoidal steel sheet, central split, folding
* Steel rear wall - insertable between the ramp mounts, can be stowed inside at the front bulkhead when not in use
* Rear stakes bolted
----Load Securing:
* Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm
* Option for installation of 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each corner, front and rear
* Various holes in the front and end cross-members for 1.2 t lashing options
* Profifix lashing rail, centrally along longitudinal axis, for securing up to LC 3000 daN
----Ramps:
Nsdpfx Alsv Eq Evodjwh
* One-piece mechanical mesh ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be closed to 20 mm)
* Rear approach angle, approx. 860 mm chassis
----Wheelbase:
* Wheelbase 1,140
----Paintwork:
* Drawbar, bulkhead, rear flap, folding legs, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange tow eye and landing gear painted black
* Side walls painted to RAL color of choice (excluding special or metallic colors), changeable up to approx. 6 weeks before completion
----Information:
* Reinforced and certified body according to EN 12642 XL including load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 30 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm, total length 2,250 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin electrical connector
* LED lighting
----General Attachments:
* Support winch at the front
* Fold-out external support legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Preparation for retrofitting container locks in front of bulkhead and rear slope for transporting 20" containers
* Bolted smooth steel bulkhead
* Side walls made of trapezoidal steel sheet, split and foldable once in the center
* Rear wall made of steel, can be slid and stored between the ramp holders when not in use, inside in front of the bulkhead
* Rear stanchions bolted
----Load Securing:
Nwedpjv D Tcbefx Aldoh
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to fit 3 t folding lashing eyes at 600 mm intervals
* In each front and rear corner: one 6.3 t lashing ring
* Multiple holes for 1.2 t lashing options in front and rear crossmember
* Profifix lashing rail along centerline for lashing up to LC 3,000 daN
----Ramps:
* One-piece mechanical grating ramps with spring assist for one-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm thickness)
* Rear approach angle approximately 860 mm on chassis
----Wheelbase:
* Wheelbase 1,140 mm
----Paintwork:
* Drawbar, bulkhead, tailgate, support legs, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and support winch painted in black
* Side walls painted in RAL color of choice (no special or metallic paints), can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced and certified body according to EN 12642 XL, including load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 30 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemtieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9:
----Braking System:
* EBS braking system
* Emergency release device for spring-actuated cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
Nsdpfsrvvfwox Aldewh
----Suspension:
* Parabolic springs with equalizer unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* 40 mm flange drawbar eye
----General Attachments:
* Jost landing gear at the front
* External, hot-dip galvanized folding support legs at the rear
* Plastic quarter mudguards
* Plastic toolbox, front right, on the front wall exterior
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* LED lighting
----Loading Area:
* Loading area length: 6.27 m
* Suitable for container transport
* 50 mm softwood flooring
* Provision at the front wall for retrofitting container locks
* Bolted front wall made of smooth sheet metal
* Drop-down trapezoidal steel side walls with fold-down spring-assisted gates
* Steel rear wall can be slid between the ramp holders when not in use, stored inside in front of the front wall
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm
* Option to fit 3 t drop lashing brackets every 600 mm
* In each front and rear corner, 1 x 6.3 t lashing ring
* Various holes in front and rear crossmembers for 1.2 t lashing options
----Ramps:
* One-piece mechanical ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (can be collapsed to 20 mm)
* Rear approach angle approx. 860 mm
----Tires:
* Tires: 235/75R17.5
----Wheelbase:
* Wheelbase: 990 mm
----Painting:
* Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear stanchions and ramps
* Side wall paintwork in RAL 9010 pure white
* Side wall paintwork in any RAL color available at extra cost
----Info:
* Subject to errors and prior sale
* New vehicle with manufacturer's warranty
----Delivery time:
* available from calendar week
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to. Tandemtiefl. / Einschubrampen verzinkt
Ara
Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9:
----Braking System:
* Electronic brake system (EBS)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axle assembly
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Eye:
* Drawbar adjustable in height by approx. 300 mm
* 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing gear at the front
* Externally mounted, hot-dip galvanized folding support legs at the rear
* Side underrun protection
* Plastic quarter mudguards
* Plastic toolbox, front right, mounted exterior on bulkhead
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* LED tail lights
----Cargo Area:
* 50 mm softwood floor
* 20" container locks, mounted at front and rear
* Bolted smooth sheet steel bulkhead
* Drop-down trapezoidal profile steel side walls with spring-assisted wall lifters
* Bolted, hot-dip galvanized rear stakes
----Load Securing:
* Perforated outer frame, bent at approx. 45°, with 2 t lashing capacity every 480 mm
* Option to fit 3 t folding lashing brackets every 600 mm (5 lashing rings fitted on each side)
* 1 x 6.3 t lashing ring at each front and rear corner
* Various boreholes in the bulkhead and rear cross-member for 1.2 t lashing options
----Ramps:
* 1 pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Rear-accessed storage compartment for ramps, integrated under the loading area within the chassis
----Paint / Finish:
* Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall
* Drop side color RAL 9010 pure white
* Side wall painting in a RAL color of your choice available at extra cost
----Information:
* New vehicle without registration
* Subject to errors and prior sale
----Delivery Time:
Nwodol Tilxopfx Aldeh
* Available immediately ex Egestorf
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL19 to luftgef. Tandemtieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, ETÜ-TA-R 19.0
----Braking System:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 11 t Gigant axles
----Suspension:
* Air suspension with manual lowering at the rear
----Drawbar / Flange Drawbar Eye:
* Drawbar with 50 mm flange drawbar eye and height-adjustable drawbar
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* LED tail lights
----General Attachments:
* Jost landing gear at the front
* External folding supports at the rear
* Tool box made of galvanized sheet steel, approx. 650 x 350 x 320 mm, mounted right side, black powder-coated
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Deck:
* Reinforcement package for drilling rig transport on the chassis – loading height + 20 mm
* 50 mm softwood floor in clamped design
* Preparation in front of front wall for retrofitting container locks
* Front wall bolted, made from smooth sheet metal
* Side walls made of profiled steel sheet – drop-down, with spring assistors
* Rear wall, steel, slides between ramps – storage bracket in front of the front wall when not in use
* Bolted rear stakes
----Load Securing:
Nodpspk D D Hsfx Aldswh
* Perforated outer frame, approx. 45° angled with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing rings possible every 600 mm
* In each corner at the front and rear: 1 x 10 t lashing ring; various holes in the front and rear cross member for 1.2 t lashing options
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be pushed together to 20 mm)
* Rear approach slope approx. 860 mm
----Tyres:
* Wheelbase: 1,310 mm
* Tyres: 235/75R17.5
----Paintwork:
* Chassis, drawbar, front wall, tailgate, rear folding supports, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in a shade of black
* Sideboard paintwork in RAL 9010 pure white
* Side wall paintwork in a RAL color of your choice available at extra charge
----Info:
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Available immediately ex Egestorf
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL21 to luftgef. Tandemtieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 21.0:
----Braking System:
* Wabco EBS-E (Electronic Braking System)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 11 t Gigant axles
----Suspension:
* Air suspension with raising and lowering system
----Drawbar / Flange Towing Eye:
Nsdpfxjl Tihxs Aldswh
* Drawbar with 50 mm flange towing eye and height-adjustable drawbar
----Lighting / Electrics:
* 15-pin electrical connector
* LED lights 12/24 V
* RDÜ tire pressure monitoring system
----General Attachments:
* Jost landing gear at the front
* External folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* Preparation before the front wall and rear slope for retrofitting container locks for transporting 20" containers
* Designed for 21 t GVW with reinforced frame and axles
* Reinforcement package on the chassis for transporting drilling equipment
* 50 mm softwood floor in clamped design
* Front wall provided with preparation for retrofitting container locks
* Bolted front wall made of smooth sheet steel
* Split, fold-down side walls made of trapezoidal-profiled sheet steel with centrally mounted folding stanchion
* Steel rear wall insertable between the ramps – storage bracket for unused panel inside at the front wall
* Rear stanchions bolted
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t retractable lashing rings every 600 mm
* Profifix lashing rail centrally positioned along the longitudinal axis for securing options up to LC 3000 daN
* 1 x 10 t lashing ring at each front and rear corner
* Lashing package with 2 x 8 t flush-mounted lashing rings per side in the outer frame; various holes for 1.2 t lashing options in front and rear cross beams
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (retractable to 20 mm)
* Rear run-up angle approx. 860 mm from chassis
----Loading Heights:
* Unladen approx. 940 mm
* Laden approx. 910 mm
----Wheelbase / Tires:
* 1,810 mm
* Tires: 235/75R17.5
----Painting:
* Painting of the side walls in a RAL color of your choice (no special or metallic paints); can be changed up to approx. 6 weeks before completion
* Drawbar, front wall, tailgate, folding supports, and drive-on ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Sample images shown
----Delivery Time:
* Available from week 29 / 2026
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
Ara
Durum: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-ER 19.0:
----Braking system:
* Wabco EBS-E (electronic braking system)
* Emergency release for spring brake cylinders
* Drum brakes
Nwedpfomi Tmaex Aldoh
----Axles:
* 2 x 11 t Gigant axles
----Suspension:
* Air suspension with lifting and lowering facility
----Drawbar / Flange Drawbar Eye:
* Drawbar with 50 mm flange drawbar eye and 110 mm height adjustment via offset plate
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin power connector
* LED tail lights 12 / 24 Volt
----General Attachments:
* Jost landing leg at front
* External folding supports at rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* Reinforcement package for drilling rig transport on the chassis
* 50 mm softwood floor, clamped design
* Fittings in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth sheet
* Split steel side walls, trapezoidal-profiled, foldable with folding stake in the center
* Steel rear wall, slide-in between ramps (storage bracket for non-use inside in front of bulkhead)
* Rear stakes bolted
----Load securing:
* Perforated outer frame approx. 45 degrees angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashings every 600 mm
* Load securing package: in front and rear corners, each 1 x 10 t UVV-rated lashing point, each side 2 x 8 t UVV-rated lashing rings, retractable in outer frame; various holes for 1.2 t lashing option in front and rear cross members
----Ramps:
* One-piece slide-in ramps, 12 t / pair, approx. 2,750 x 620 mm
* Rear driving slope approx. 860 mm
----Loading height:
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
----Tyres / Wheelbase:
* Wheelbase: 1,810 mm
* Tyres: 235/75R17.5
----Paintwork:
* Chassis, drawbar, bulkhead, rear gate, folding supports, and loading ramps hot-dip galvanized
* ---Axles, air tanks, flange drawbar eye, and landing leg painted in black shade---
* Vehicle is hot-dip galvanized
----Info:
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted / subject to change
----Delivery time:
* Immediately available from Egestorf
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4
----Brake System:
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
Nwedpfsq Dyvysx Aldoh
* Air suspension
----Drawbar / Flange Eye:
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* 40 mm flange drawbar eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED tail lights 12/24 V
* 15-pin socket
----General Attachments:
* Jost landing gear at front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox at the front right on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Bed:
* 50 mm softwood flooring
* Fitting for retrofitting container locks in front of the front wall
* Bolted front wall made from smooth steel sheet
* Side walls made from profiled sheet steel, foldable with drop-side spring assistance
* Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use
* Rear stakes bolted
* Beveled rear drive-on angle approx. 860 mm
----Load Securing:
* Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm
* Option to install 3 t drop lashing rings every 600 mm
* 1 x 6.3 t lashing eye at each front and rear corner
* Various holes in front and rear cross-member for 1.2 t lashing points
----Ramps:
* One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm)
----Painting:
* Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps
* Drop-side color in RAL 9010 pure white
* Painting of side walls in a RAL color of choice available at extra charge
----Information:
* -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate --
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Ara
Durum: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline:
----Braking System:
* EBS brake system
* Emergency release mechanism for spring brake cylinders
Njdpfx Alspk D D Uodswh
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange Towing Eye:
* Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding support legs at the rear
* Toolbox made from galvanized sheet steel on the right side
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* Bolt-on underrun protection with LED rear lights
----Tipping Platform:
* Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel
* Hot-dip galvanized chassis
* Fully galvanized steel three-way tipper body
* Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors
* Rear tailgate foldable and swinging via manual central locking
* Hot-dip galvanized, bolted rear stanchion
----Load Securing:
* 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame
* 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps
----Ramps:
* 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks
* Lockable rear storage compartment recessed in the chassis beneath the loading area
----Tyres:
* 235/75 R 17.5 tires
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Vehicle hot-dip galvanized
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available from Egestorf, near the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4
----Brakes:
* EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Drawbar / Flanged towing eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flanged towing eye
----Lighting / Electrics:
* RDÜ (Tire Pressure Monitoring System)
* LED taillights 12/24 V
* 15-pin electric connector
Nodpfxepk Dv Rs Aldewh
----General Attachments:
* Jost landing gear at front
* External hot-dip galvanized folding support legs at rear
* Plastic toolbox, front right outside on front wall
* Side underrun protection
* Plastic quarter mudguards
----Low-bed loading area:
* 50 mm softwood floor
* Preparation in front of bulkhead for later installation of container locks
* Bolt-on smooth steel front wall
* Side walls made of trapezoidal steel sheet, foldable, with drop side lifting device
* Steel rear wall, insertable between ramp mounts; when not in use, stored inside in front of bulkhead
* Bolt-on rear stanchions
* Rear approach angle approx. 860 mm
----Load securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Provision for fitting 3 t lashing rings every 600 mm
* In each corner at front and rear: 1 x 6.3 t lashing ring
* Various drilled holes for 1.2 t lashing points in front and rear crossmembers
----Ramps:
* One-piece mechanical grid ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (collapsible to 20 mm width)
----Paintwork:
* Hot-dip galvanized chassis, drawbar, front wall, rear wall, tailgate, and ramps
* Drop side color in RAL 9010 pure white
* Painting of side walls in a RAL color of your choice available at extra cost
----Info:
* --Reinforced and certified body according to EN 12642 XL, including load securing certificate--
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Ara
Durum: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline:
----Braking System:
* EBS brake system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange Towing Eye:
* Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding support legs at the rear
* Toolbox made from galvanized sheet steel on the right side
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* Bolt-on underrun protection with LED rear lights
----Tipping Platform:
* Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel
* Hot-dip galvanized chassis
* Fully galvanized steel three-way tipper body
* Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors
* Rear tailgate foldable and swinging via manual central locking
* Hot-dip galvanized, bolted rear stanchion
----Load Securing:
Njdpfx Alspk D Dmjdewh
* 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame
* 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps
----Ramps:
* 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks
* Lockable rear storage compartment recessed in the chassis beneath the loading area
----Tyres:
* 235/75 R 17.5 tires
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Vehicle hot-dip galvanized
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available from Egestorf, near the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release device for spring brake cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange towing eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding support legs at the rear
* Plastic toolbox installed on the right front exterior of the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood flooring
* Prepared fixture in front of the bulkhead for later installation of container locks
* Bolt-on bulkhead made from flat sheet steel
* Drop-down side panels made from trapezoidal steel sheets with sideboard spring assist
* Steel rear panel can be inserted between ramps – storage holder provided inside the bulkhead when not in use
* Rear stanchions bolted
----Load securing:
* Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashings every 600 mm
* In the corners (front and rear), each fitted with 1 x 6.3 t lashing ring
* Various drill holes in the bulkhead and end cross member for additional lashing points at 1.2 t
Nsdpfxsxglibo Aldewh
----Ramps:
* One-piece mechanical mesh ramps with spring assist for one-person operation, approx. 2,750 x 600 mm (can be retracted to 20 mm thickness)
* Rear approach angle approx. 860 mm
----Painting:
* Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear panel
* Side panel color in RAL 9010 pure white
* Side panel painting in another RAL color available at extra cost
----Information:
* --Reinforced and certified bodywork according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
----Delivery time:
* Available from approx. CW 30/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Anlegerampen
Ara
Durum: yeni, azami yük ağırlığı: 8.670 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, * KA-TA-R 11.9 Masterline:
----Brakes:
* Wabco EBS
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalization unit
----Drawbar / Flange Towing Eye:
* Height-adjustable (300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* LED lighting
* 15-pin power connector
----General Attachments:
* Galvanized sheet steel toolbox, right side-mounted
* Bolted underrun protection
* Plastic quarter mudguards
* Jost mechanical landing leg at the front
* Rear: 2 mechanical, hot-dip galvanized folding supports
----Tipper Body:
* Mesh hooks on sides and rear in the central locking mounts, plus 3 additional on the front wall
* Hot-dip galvanized chassis
* Steel pallet three-way tipper body
* Continuous, drop-side panels without central stanchion, folding with drop-side assist spring
* Rear tailgate can be folded down or swung with manual central locking
* Hot-dip galvanized, bolted rear stanchion
* 4 mm steel floor plate
* Rear ramp mounting rail
----Load Securing:
* Each corner with 1 x 5 t recessed and foldable lashing ring
* Additionally, 4 x 3 t foldable lashing rings recessed into the outer frame on each side
----Ramps:
* 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the loading area, integrated into the chassis at the rear
----Tyres:
* Tyres: 235/75 R 17.5
----Paintwork:
* Axles, springs, air tanks, drawbar, and landing leg painted in black
* Side panels painted in RAL 9010 pure white
* Painting of the side panels in an RAL color of your choice available at extra charge
* Floor and front wall hot-dip galvanized
Nwjdpfxoq Hg Dxe Aldoh
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to prior sale and errors excepted
----Delivery Time:
* Available immediately ex Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Anlegerampen
Ara
Durum: yeni, azami yük ağırlığı: 8.600 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, * KA-TA-R 11.9 Masterline:
----Braking System:
* Wabco EBS
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizing unit
----Drawbar / Drawbar Eye:
* Height-adjustable, hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange drawbar eye
----Electrics / Lighting:
* RDÜ tire monitoring system
* LED lighting
* 15-pin plug connector
----General Attachments:
* Toolbox made of galvanized sheet steel, mounted on the right side
* Bolt-on underrun protection
* Quarter mudguards made of plastic
* Jost mechanical landing gear at the front
* Rear: 2 mechanical, hot-dip galvanized fold-down supports
----Tipper Body:
* Net hooks on the sides and rear in the central locking mounts as well as 3 units on the front wall exterior
* Hot-dip galvanized chassis
* Steel platform, 3-way tipper body
* Continuous side walls, drop-down without central stanchion, with drop-side spring assist
* Tailgate, drop-down and swinging with manual central locking
* Hot-dip galvanized bolted rear stanchion
* 4 mm steel floor plate
* Rear guide rail for drive-on ramps
Nedpfsv Dz N Aex Aldswh
----Load Securing:
* 1 x 5 t recessed, folding lashing ring in each corner
* 4 x 3 t recessed and folding lashing rings in the outer frame on each side
----Ramps:
* 1 pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the loading area, recessed into the chassis from the rear
----Tires:
* Tires 235/75 R 17.5
----Paintwork:
* Axles, springs, air tanks, drawbar, and landing gear painted in black tone
* Drop-side paintwork in RAL 9010 pure white
* Paint finish for side walls in any RAL color available at extra cost
* Floor and front wall hot-dip galvanized
----Information:
* Reinforced body with load securing certificate in accordance with EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Agra vorbereitung
Ara
Durum: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline
----Braking System:
* Wabco EBS
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Flange Eye:
* Height-adjustable drawbar (up to 300 mm), with 40 mm flange towing eye
----Electrics / Lighting:
Nodpeq Euagofx Aldswh
* RDÜ Tire Pressure Monitoring System
* Multivoltage
* 15-pin power connector
* 12V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED rear lights
----General Attachments:
* Manual landing gear at the front
* Two mechanical folding supports at the rear
* Plastic toolbox, right-hand side
* Two-step entry at the front left (in direction of travel)
* Bolted underrun protection
* Plastic quarter mudguards
----Tipper Platform:
* Mesh hooks on sides and rear at the central locking mounts, plus two on the front bulkhead
* Steel platform superstructure, 3-way tipper (continuous side walls, without center stanchions, drop-down with tailgate spring assist, tailboard foldable and swinging via manual central locking)
* 4 mm steel bed
* Rear ramp mounting rail
----Load Securing:
* One lashing point (5 t) in each corner
* Four lashing rings (3 t each) recessed on each side into the outer frame
----Ramps:
* One pair of aluminum approach ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment for ramps recessed under the loading area in the chassis
----Tyres:
* Tyres 385/55 R 19.5
----Paintwork:
* Chassis, drawbar, tipper body, bulkhead, folding supports, and rear stanchions hot-dip galvanized
* Axles, springs, air tank, flange eye and landing gear painted in black
* Side panels painted in a RAL color of your choice (no special or metallic finishes); color can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced body with EN 12642 XL load securing certificate
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Sample images
----Delivery Time:
* Available from approx. calendar week 28 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking system:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange drawbar eye:
* Drawbar adjustable in height by approx. 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* 40 mm flange drawbar eye
----Lighting / Electrics:
* TPMS (Tyre Pressure Monitoring System)
* LED lighting
----General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox on the front right outside of the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood floor
* Preparation in front of the front wall for subsequent installation of container locks
* Bolted front wall made of smooth sheet metal
* Drop sides made of trapezoidal sheet steel, foldable with side board spring lifter
* Rear wall made of steel, slidable between the ramps – storage bracket inside front wall when not in use
* Removable rear stanchions (bolted)
----Load securing:
* Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various mounting holes in front crossmember and rear end carrier for 1.2 t lashing points
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be nested up to 20 mm)
* Rear approach slope approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, front wall, ramps, and rear wall
* Platform side wall color in RAL 9010 pure white
* Painting of the side walls in any RAL color available at extra cost
----Info:
* --Reinforced and certified structure according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from approx. week 30/2026
Nodexglh Rspfx Aldswh
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Agra vorbereitung
Ara
Durum: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline
----Braking System:
* Wabco EBS
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
Nwedpfx Alol Thw Iedoh
----Suspension:
* Parabolic springs with tandem equalisation unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar (adjustable by 300 mm) with 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* Multivoltage
* 15-pin power connector
* 12 V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED rear lights
----General Attachments:
* Mechanical landing gear at the front
* Two mechanical folding supports at the rear
* Plastic toolbox on the right side
* Two-step entry step at the front left (in driving direction)
* Bolted underrun protection
* Plastic quarter mudguards
----Tipper Body:
* Net hooks on the sides and rear in the central locking bearing, plus 2 on the front wall
* Steel pallet-3-way tipping body (continuous side walls, without centre stanchions, foldable with board wall spring assist, tailgate foldable and swinging via manual central locking)
* 4 mm steel floor
* Mounting rail at the rear for loading ramps
----Load Securing:
* 1 x 5 t lashing ring in each corner
* 4 x 3 t lashing rings recessed into the outer frame on each side
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment under the loading platform, recessed into the chassis at the rear
----Tyres:
* Tyres 385/55 R 19.5
----Paintwork:
* Chassis, drawbar, tipping body, front wall, folding supports and rear stanchions hot-dip galvanised
* Axles, springs, air tanks, flange towing eye and landing gear painted black
* Side walls painted in a custom RAL colour (no special or metallic finishes), can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced body with EN 12642 XL load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Sample images
----Delivery Time:
* Available from approx. week 28 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL21 to luftgef. Tandemtieflader mit 3 mtr Rampen
Ara
Durum: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 21.0 – Technical Specifications and Equipment Overview:
---- Braking System:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded brake cylinders
* Drum brakes
---- Axles:
* 2 x 11 t Gigant axles
---- Suspension:
* Air suspension with lifting and lowering function
---- Drawbar / Towing Eye:
* Drawbar with 50 mm flange towing eye; height-adjustable drawbar
---- Lighting / Electrical System:
* 15-pole electrical connector
* LED lights, 12/24 V
* RDÜ tire pressure monitoring system
---- General Attachments:
* Jost landing gear at the front
* External folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side
* Side underrun protection
* Plastic quarter mudguards
---- Low Loader Platform:
* Front of bulkhead and rear slope prepped for subsequent installation of container locks for 20" container transport
* Version with 21 t GVW, reinforced chassis and axles
* Reinforcement package on the chassis for drill rig transport
* 50 mm softwood floor, clamped design
* Front of bulkhead prepped for subsequent installation of container locks
* Bolted front wall made of smooth steel sheet
* Split side walls made of trapezoidal profiled steel sheet, fold-down with center folding stake
* Rear wall made of steel, slidable between the ramps (with storage holder at the front when not in use)
* Bolted rear stakes
---- Load Securing:
* Perforated outer frame, approx. 45° edge, with 2 t lashing capacity every 480 mm
* Optional installation of 3 t drop lashing rings every 600 mm
* Profifix lashing rail centrally aligned with the longitudinal axis for lashing up to LC 3000 daN
* In the front and rear corners, each with 1 x 10 t lashing ring
* Load securing package (Lasi-Paket): on each side, 2 x 8 t retractable lashing rings in the outer frame; various bores in the front wall and end cross member for 1.2 t lashing points
---- Ramps:
* One-piece mechanical steel grating ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (can be pushed together to 20 mm)
* Rear approach slope approx. 860 mm (chassis)
---- Loading Heights:
* Unladen: approx. 940 mm
* Laden: approx. 910 mm
---- Wheelbase / Tyres:
* 1,810 mm
* Tyres: 235/75 R17.5
---- Paintwork:
* Side wall paintwork in a custom RAL color shade (special or metallic paint not available); amendable up to approx. 6 weeks before completion
* Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted black
Nodpfsq Dyu Uex Aldowh
---- Additional Information:
* New vehicle with manufacturer’s warranty
* Subject to alterations and prior sale
* Sample images
---- Delivery Time:
* Available from calendar week 29 / 2026
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking System:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with balance mechanism
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, 300 mm range
* Drawbar extension of 250 mm (total length 2,250 mm)
* 40 mm flange towing eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding support legs at the rear
* Plastic toolbox, front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted flat sheet steel bulkhead
* Sidewalls made of trapezoidal-profiled steel, foldable with drop side spring assist
* Steel rear wall, retractable between the ramps – storage bracket on the inside of front bulkhead when not in use
* Rear stakes bolted
----Load Securing:
* Perforated outer frame, approx. 45-degree angled, with 2 t lashing force every 480 mm
* Option to install 3 t flip lashing rings every 600 mm
* Each front and rear corner with 1 x 6.3 t lashing ring
* Various holes in bulkhead and rear crossmember for additional 1.2 t lashing possibilities
* Profifix lashing rail along the longitudinal axis (center) for lashing loads up to LC 3,000 daN
----Ramps:
* One-piece mechanical grating access ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm overall height)
* Rear approach angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis including drawbar, bulkhead, ramps, and rear wall
* Sidewall color in RAL 9010 pure white
* Painting of sidewalls in a different RAL color available at additional cost
----Information:
Nwedsq Dyvvjpfx Aldjh
* --Reinforced and certified body in accordance with EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from calendar week 29/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL19 to. Tandemtieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 19.0:
----Brake System:
Nsdpfx Asl Th Hljldewh
* Wabco EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
2 x 10 t BPW Eco axles
----Suspension:
* Parabolic springs -110 mm wide- with tandem compensation unit
----Drawbar / Flange eye:
Drawbar with 50 mm flange towing eye and height-adjustable drawbar
----Electrics / Lighting:
* 15-pin power connector
* LED tail lights
* RDÜ tyre pressure monitoring system
----General Attachments:
* Jost landing gear at the front
* Rear fold-out supports (external)
* Lateral underrun protection
* Quarter plastic mudguards
----Low-loader Platform:
* 50 mm softwood floor
* Preparation in front of the front wall for retrofitting container locks
* Bolted smooth steel front wall
* Side panels made from trapezoidal-profiled steel, foldable with spring-assisted mechanism
* Rear steel wall, retractable between the ramps – holder provided inside in front of the front wall when not in use
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to fit 3 t folding lashing rings every 600 mm
* In the corners at the front and rear: 1 x 10 t lashing ring; various holes in the front and rear crossmembers for 1.2 t lashing points
* Central Profifix lashing rail along the longitudinal axis for lashing up to LC 3000 daN
----Ramps:
* One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be compressed to 20 mm)
* Rear approach angle approx. 860 mm
----Paintwork:
* Chassis, drawbar, front wall, rear wall, drive-on ramps and folding supports hot-dip galvanised
* Drop sides painted in RAL 9010 pure white
* Side panels can be painted in a RAL colour of your choice at extra cost
* Axles, springs, air tanks, flange towing eye and landing gear painted in black
----Information:
* New vehicle with full manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately from Egestorf on the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL19 to luftgef. Tandemtieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, ETÜ-TA-R 19.0
----Brake System:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 11 t Gigant axles
----Suspension:
* Air suspension with manual lowering at the rear
Nwodopk D Ncepfx Aldjh
----Drawbar / Flange Towing Eye:
* Drawbar with 50 mm flange towing eye and height-adjustable drawbar
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin electrical connector
* LED tail lights
----General Fittings:
* Jost landing gear at front
* Fold-out stabilizer legs at rear
* Tool box made of galvanized sheet steel approx. 650 x 350 x 320 mm, mounted right side (powder-coated in black)
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* Reinforcement package for drilling rig transport on chassis – loading height + 20 mm
* 50 mm softwood floor in clamped design
* Preparation in front of the front wall for later installation of container locks
* Bolted front wall made of smooth sheet metal
* Side walls made of trapezoidal profile steel sheet, folding down with spring-assisted dropside lift
* Steel rear wall, insertable between ramps – storage bracket inside in front of the front wall when not in use
* Rear stanchions bolted
----Load Securing:
* Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* In the corners at the front and rear, 1 x 10 t lashing ring each; various holes for 1.2 t lashing options in the front and rear cross member
----Ramps:
* One-piece mechanical grating ramps with spring system for single-person operation approx. 2,750 x 620 mm (collapsible to 20 mm)
* Rear approach slope approx. 860 mm
----Tyres:
* Wheelbase: 1,310 mm
* Tyres: 235/75R17.5
----Paintwork:
* Chassis, drawbar, front wall, tailgate, rear stabilizer legs, and ramps hot-dip galvanized
* Axles, springs, air tank, and landing gear painted in a shade of black
* Sideboard panels painted RAL 9010 pure white
* Painting of side walls in other RAL color available for surcharge
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release mechanism for spring-loaded actuators
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalization unit
Nsdpsrvvflsfx Aldswh
----Drawbar / Drawbar Eye:
* Height-adjustable drawbar (adjustable by approx. 300 mm)
* Drawbar extension by 250 mm (up to 2,250 mm)
* 40 mm flange-type towing eye
----Lighting / Electrics:
* Tire pressure monitoring system (TPMS)
* LED lighting
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox at the front right, mounted on the outside of the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Deck:
* 50 mm softwood floor
* Provision in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made from smooth sheet metal
* Drop sides made of trapezoidal-profile steel sheet, folding down with sideboard spring assist
* Rear wall made of steel, can be inserted between the ramps (storage bracket for non-use inside in front of the bulkhead)
* Rear stanchions bolted
----Load securing:
* Perforated outer frame, angled approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Option to install 3 t retractable lashing rings every 600 mm
* One 6.3 t lashing ring front and rear, in each corner
* Various drilled holes in the front and rear crossmember for 1.2 t lashing points
* Profifix lashing rail along the longitudinal axis, centered, for lashing up to LC 3000 daN
----Ramps:
* One-piece mechanical steel grid loading ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm)
* Rear approach angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis including drawbar, bulkhead, loading ramps, and rear wall
* Sideboard color in RAL 9010 pure white
* Painting of side panels in an RAL color tone available at extra cost
----Information:
* Reinforced and certified body according to EN 12642 XL, including load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from approx. calendar week 29/2026
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal 11,9 to tandemtiefl. 5,37 mtr mit auffahrrampen"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

























































































































































































































































































































































































































































