Kullanılmış Müller-Mitteltal 24 To. Kombi Cont. Abr.abse.tiefl.-Liftachse Neu satın al (34.196)

Durum: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual rear lowering ----Axle: * 3 x 11 t Gigant axles * Middle axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) Djdopk D Awepfx Ab Ujwa ----General Fittings: * Tool box made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets, made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear impact protection buffer * Mechanical drop-down supports at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide roll-off containers * Steel floor with recessed rollers in the bogie area * When transporting roll-off containers, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point container locking as well as mechanically insertable end stops at the front in the guide rails * Load securing certificate in accordance with DIN 30722-1 * Transport of up to 2 skip containers with a max. volume of 10 m³ possible * 8 movable skip stops for lateral centering of the skips, front 4 skip stops insertable with oscillating end stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips * 4 side lashing cleats (cloverleaf design) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Welded anti-slip strip in the running area of the ramp incline * 1 pair of aluminum approach ramps (16 t / pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tires: * Tires: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Side and rear contour tape, reflective * Axles, turntable, drawbar, and air tanks painted black * Hot-dip galvanized main frame ----Information: * Technical permissible gross weight up to 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026

Durum: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual rear lowering ----Axle: * 3 x 11 t Gigant axles * Center axle can be lifted ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Tool box made of powder-coated steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray suppression * Plastic rear bumper pads * Mechanical rear safety support legs ----Container / Low-loader Platform: * Hot-dip galvanized main frame with raised outer rails (approx. 25 mm higher) for guiding roll-off containers * Steel floor with roller depressions in the turntable area * For roll-off container transport, container lengths from 5,500 - 7,000 mm possible * Pneumatic 4-point locking system and mechanical plug-in end stops at the front of the running rails * Load securing certificate as per DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 removable skip container stops for lateral centering, front 4 stops with swingable end stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on each side for attaching tie-down elements for positive and non-positive securing of skip containers * 4 cloverleaf-style lashing bars (each side) and 1 pair of 13.4 t UVV lashing rings to the front * Load securing certificates per DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Welded bead as anti-slip surface in the ramp track area * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Tires: * Tires: 235/75 R17.5 Dwsdpfx Abotplv Te Uea ----Ride Height: * Loaded ride height approx. 1003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides & rear * Axles, turntable, drawbar and air tanks painted in a shade of black * Hot-dip galvanized main frame ----Info: * Gross vehicle weight of 27,000 kg technically possible * New vehicle without initial registration, with manufacturer warranty * Errors and prior sale reserved ----Delivery Time: * Available from approx. week 47/2026

Durum: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle with lift function ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & adjustable height device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic impact protection buffers * Mechanical drop-down supports at the rear ----Container / Low Loader Platform: Dsdpfx Abepk D Iio Ujwa * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with wheel recesses in the bogie area * Suitable for roll-off containers with a container length of 5,500 - 7,000 mm * Pneumatic 4-point clamp-locking system plus mechanical plug-in front stops in the running rails * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip container stops for lateral centering, front 4 stops lockable with pivoting backstop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tension elements to secure skip containers positively and non-positively * 4 lashing rails per side (cloverleaf design) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Weld beads as anti-slip surface in the track area of the ramp slope * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tires: 235/75 R17.5 ----Loaded Platform Height: * Platform height loaded: approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Paintwork: * Contour tape, reflective, on sides and rear * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanized main frame ----Info: * Technical permissible total weight: 27,000 kg * New vehicle without first registration with manufacturer warranty * Subject to alterations and prior sale ----Delivery time: * Available from approx. week 47/2026

Durum: yeni, azami yük ağırlığı: 14.650 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2024, RS-T 18,0 / 018: ----Fren Sistemi: * Wabco EBS-E (elektronik fren sistemi) * Yaylı akümülatör silindiri için acil serbest bırakma sistemi * Disk frenler ----Akslar: * 2 x 10 tonluk SAF akslar ----Süspansiyon: * Fren serbest bırakıldığında otomatik olarak alçalabilen hava süspansiyonu ----Çeki Demiri: * 40 mm çeki borusu ve yaylı mekanizma ve vida ile yüksek ayar yapılabilen 2.300 mm uzunluğunda çeki demiri ----Elektrik / Aydınlatma: * RDÜ Lastik Basıncı İzleme Sistemi * Koruyucu kapaklı LED arka lambalar * 2 x 7 kutuplu elektrik prizi ----Genel Ek Parçalar: * Sağ tarafta plastik alet kutusu, kapalı plastik çamurluk Dwedpfjl Tqkwox Ab Uea * Yan tarafta kapalı çarpma koruyucu, reklam alanı olarak kullanılabilir * 2 çarpma tamponu olan alt şasi koruyucu * Arka tarafta katlanabilir A tabelası, atık toplama için ----Konteyner Tabanı: * Yaklaşık 6.950 mm uzunluğunda silindirli taban * Rulo konteyner, pnömatik 4 kademeli pençe kilitleme sistemi ile sabitlenir * Ön tarafta, 2 ek sabitleme noktasıyla 2 adet takılabilir konteyner durdurucusu bulunur * 5.000 - 7.000 mm konteyner uzunluklarına uygun ----Sürüş Yüksekliği: * Yüksüz yaklaşık 1.165 mm ----Boya: * Şasi sıcak daldırma galvanizli * Hava tankı, akslar, döner halka ve çeki demiri ----Bilgiler: * --20.000 kg toplam ağırlık teknik olarak mümkün-- * Üretici garantisiyle yeni araç * Hatalar ve ön satış saklıdır ----Teslimat Süresi: * Egestorf'tan hemen teslim edilebilir

Durum: yeni, azami yük ağırlığı: 14.650 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2024, RS-T 18,0 / 018: ----Fren Sistemi: * Wabco EBS-E (elektronik fren sistemi) * Yaylı akü silindiri için acil serbest bırakma mekanizması * Disk frenler ----Akslar: 2 x 10 tonluk SAF akslar ----Süspansiyon: * Frenin serbest bırakılması durumunda otomatik alçalma özelliğine sahip hava süspansiyonu ----Çeki Demiri: * 40 mm çekme gözü ve yay ve vida ile yükseklik ayarı olan 2.300 mm uzunluğunda çeki demiri ----Elektrik / Aydınlatma: * RDÜ lastik basıncı izleme sistemi * Koruyucu kalkanlı LED arka lambalar * 2 x 7 kutuplu elektrik prizi ----Genel Ek Parçalar: * Sağ tarafta bulunan plastik alet kutusu, kapalı plastik çamurluk * Yan tarafta bulunan kapalı çarpma koruması, reklam alanı olarak kullanılabilir * 2 çarpma tamponu olan alt çarpma koruması * Çöp toplama için arka kısımda katlanabilir A tabelası ----Konteyner Yüzeyi: * Yaklaşık 6.950 mm uzunluğunda rulo ray * Rulo konteyner, pnömatik 4'lü pençe kilitleme sistemi ile sabitlenir * Ön tarafta, 2 ek takma pozisyonu ile 2 adet takılabilir konteyner durdurucu bulunur * 5.000 ila 7.000 mm konteyner uzunluklarına uygun ----Sürüş Yüksekliği: * Yüksüz yaklaşık 1.165 mm ----Boya: * Şasi sıcak daldırma galvanizli * Hava tankı, akslar, döner tabla ve çeki demiri ----Bilgiler: * --20.000 kg toplam ağırlık teknik olarak mümkün-- * Üretici garantisi ile yeni araç * Hatalar ve ön satışlar saklıdır ----Teslimat Süresi: Dwjdol Tpy Hspfx Ab Uja * Egestorf'tan hemen teslim edilebilir

Durum: yeni, azami yük ağırlığı: 13.650 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RAK 18.0 Dış Makaralı, Geriye Kaldırma Fonksiyonlu ----Fren: * Wabco EBS-E (elektronik fren sistemi) * Yaylı fren silindiri için acil açma tertibatı * Kampanalı frenler ----Aks: * BPW Eco Plus akslar ----Süspansiyon: * Havalı süspansiyon (fren bağlantısı kesildiğinde otomatik alçalma) ----Çekme Kolu: * Yaklaşık 2.100 mm uzunluğunda, 40 mm çekme gözlü ve yüksekliği çekme yayı & gergi ile ayarlanabilir, pnömatik olarak alçaltılabilir çekme kolu ----Genel Donanım: * Sağ yan plastik alet kutusu – yaklaşık 858 x 500 x 500 mm * Ön ve arka kapalı plastik çamurluklar * Kapalı yan yana çarpma koruması * Arka vidalı alt koruma * Galvanizli delikli sacdan mamul konteyner ağları için yaklaşık 1.000 x 500 x 500 mm'lik saklama kutusu * Arkada katlanabilir A levhası * Arka tampon koruma ----Elektrik / Aydınlatma: * Çekici araçlar için 12 ve 24V elektrik uyumlu EBS çoklu voltaj sistemi * 15 pinli 24V güç soketi * 12 ve 24V uyumlu LED aydınlatma sistemi * 2 ekstra LED geri vites farı * RDÜ Lastik basıncı izleme sistemi ----Uygun Konteyner Boyutları: * 6.500 mm – 7.000 mm arası konteynerler için ----Konteyner Kızak/Devirme Köprüsü: Dwjdpfx Aex Ipbmob Uea * Dış makaralı konteyner kılavuzu için yaklaşık 2.180 mm net mesafeyle düz çelikten yan sınırlama ve her iki yanda toplam üç adet merkezleme elemanı ile konteyner yönlendirme * Konteyner makaralarının alınması ve takılması için arka tarafta devrilme şasisiyle bağlantılı, uzunlamasına kaymaya karşı pnömatik kilitli, iki adet gömülü makara yatağı * Makaralı konteynerlerin kuvvetli kilitlenmesi, devrilme şasisinin önüne yerleştirilen ve dışarıdan kullanılabilen pnömatik çapraz gerdirme ünitesiyle (tek taraflı kontrol) * Şasi iç kısmı geri devirmeli ana gövdeli, motor hidrolik tahrikli, tek boru sistemli devirme tesisatı * Devirme açısı 42° * Şasi ile devrilme yapısı arasında lastik takozlar * Konteynerlerin önden itilerek yüklenmesi, tamamen galvanizli şasi ----Lastik ebadı: * Tekli lastik 385/55 R 22.5 ----Yükleme yüksekliği: * Boşken yaklaşık 1.270 mm ----Boya: * Alt koruma ve kilitleme parçaları (boyasız) * Dönebilen platform, hava tankı, akslar, döner tabla ve çekme kolu siyah tonunda boyalı * Galvanizli ----Bilgiler: * DIN 30722 Bölüm 1’e uygun konteyner taşımacılığı için * İlk tescilsiz, üretici garantili yeni araç * Hatalar ve ara satış hakkı saklıdır ----Teslimat süresi: * Egestorf’ta hemen teslim

Durum: yeni, azami yük ağırlığı: 13.650 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, RAK 18,0 Dış Silindirli, Geriye Eğmeli Fonksiyonlu ----Fren: * Wabco EBS-E (elektronik fren sistemi) * Yaylı silindirler için acil boşaltma mekanizması * Kampanalı (tambur) frenler ----Aks: * BPW Eco Plus akslar ----Süspansiyon: * Havalı süspansiyon (fren ayrıldığında otomatik alçalma) ----Çekiş Makası: * Pnömatik olarak alçaltılabilen, yaklaşık 2.100 mm uzunluğunda, 40 mm çekme gözlü ve çekme yay & gergi kelepçesi ile yükseklik ayarlı çekiş makası ----Genel Donanım Parçaları: * Sağ yan tarafta plastik takım kutusu - yaklaşık 858 x 500 x 500 mm * Kapalı plastik çamurluklar ön ve arka * Kapalı yan çarpma koruması * Arkada cıvatalı alt koruma * Yaklaşık 1.000 x 500 x 500 mm galvanizli delikli sacdan konteyner ağları için saklama kutusu * Katlanabilir arka A levhası * Arka tampon koruma lastiği ----Elektrik / Aydınlatma: * 12 ve 24V elektrikli çekici araçlar için EBS çok voltaj sistemi * 15 pinli 24V güç fişi * 12 ve 24V için LED aydınlatma sistemi * Ek olarak 2 adet LED geri vites lambası * TPMS lastik basınç izleme sistemi ----Uygun Konteyner Uzunlukları: * 6500 mm ile 7000 mm arası konteynerler için uygundur ----Konteyner Yüzeyi / Kasa: * Yaklaşık 2.180 mm boşluklu dıştan düz çelik ile yönlendirme ve her iki yanda 3’er yanaştırma parçası ile konteyner kılavuzu * Arkada, konteyner silindirlerini almak ve sabitlemek için, kaymayı önleyen, eğmeli çerçeveyle bağlantılı, pnömatik kilitli 2 adet derinleştirilmiş silindir yatağı * Roll konteynerlerin mekanik olarak kilitlenmesi, eğmeli çerçevenin ön kısmına yerleştirilmiş ve dışarıdan kumanda edilebilen pnömatik çapraz germe ünitesiyle (tek taraflı kullanım) * Şasi iç kısmı, geriye eğilebilir ana gövdeyle – tek borulu motorlu hidrolik eğmeli sistem – * Eğme açısı 42° * Şasi ve eğmeli çerçeve arasında kauçuk takozlar * Konteynerler önden sürülerek yüklenir, şasi sıcak daldırma galvanizlidir ----Lastik: * Tekli lastik 385/55 R 22,5 ----Yükleme Yüksekliği: * Boşken yaklaşık 1.270 mm ----Boya: * Alt koruma ve kilitleme parçaları (son kat boya yok) * Döner tabla, hava tankı, akslar, döner halka ve çekiş makası siyah renkte boyalı * Sıcak daldırma galvanizli ----Bilgi: * DIN 30722-1’e uygun konteyner taşımacılığı için * İlk tescilsiz yeni araç, üretici garantili * Hatalar ve ara satış hakkı saklıdır ----Teslimat Süresi: * Egestorf’tan hemen teslim Dwjdpfjx Ipa Aex Ab Uja

Durum: yeni, azami yük ağırlığı: 12.200 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * TM-TA 14.4: ----Braking system: * Wabco EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizer aggregate ----Drawbar / Flange towing eye: * Height-adjustable +/- 150 mm hot-dip galvanized drawbar * 40 mm flange towing eye ----Electrics / Lighting: * 15-pin electrical connector * LED tail lights * RDÜ tire pressure monitoring system ----General attachments: * Jost landing gear at the front * 2 x external drop-down supports at the rear * Enclosed single plastic mudguards * Foldable A-sign at the rear * Plastic rear underrun protection buffer * Hot-dip galvanized underrun protection with integrated chain storage box (W: 370 mm x D: 420 mm x H: 480 mm) front left & right ----Load securing: * On each side, 2 x 5.3 t UVV lashing rings for attaching tensioning elements ----Container stops: Dwodpfx Ajl Thyqeb Uoa * 2 removable container stops for lateral centering of containers * Front container stops with pivoting stop, insertable in 4 positions ----Painting: * Hot-dip galvanized chassis * Axles, springs, air tanks, and landing gear painted in black ----Notes: * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 12.200 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * TM-TA 14.4: ----Braking system: * Wabco EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange drawbar eye: * Height-adjustable, hot-dip galvanized drawbar with +/- 150 mm adjustment * 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin electrical connector * LED rear lights * RDÜ tire pressure monitoring system ----General attachments: * Jost landing gear at the front * 2 x external drop legs at the rear * Enclosed single plastic mudguards * Foldable A-board at the rear * Plastic underrun protection bumpers * Hot-dip galvanized underrun guard with integrated chain storage box (W = 370 mm x D = 420 mm x H = 480 mm) at the front left & right Dwodpfx Aopk Dyxeb Usa ----Load securing: * 2 x 5.3 t UVV lashing rings per side for attaching tensioning elements * Includes 2 ratchet lashing devices fixed to the outer frame with chain box * Equalizing chain on both sides with eye and quick shortener, Y-special version, 6.3 t ----Container stops: * 2 removable container stops for lateral centering of containers * Front container stops with oscillating stop can be pegged in 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks, and landing gear painted in black ----Information: * Tensioning force with load securing certificate * Subject to errors and prior sale * New vehicle with manufacturer’s warranty ----Delivery time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes Dedpfov D Tbkjx Ab Uowa ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin connector * LED lighting system 12/24 V * 2 additional LED reversing lights at rear (operated via reverse gear) * 1 removable LED beacon (including holder) at rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 meter warning panel sets at the front and rear * Support crank at the front * Rear external folding supports * Plastic toolboxes approx. 750 x 350 x 300 mm, mounted on left and right sides * Lateral underrun protection * Rear underrun guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable, locking dimension retracted per ISO - DIN 15190 = 2,259 mm; container locks extended = 2,819 mm (this dimension is not to DIN) for an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, angled approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing eyes every 600 mm - 5 x 3 t UVV-certified lashing eyes installed on each side - * At each front and rear corner: 1 x 6.3 t lashing ring (front, directly behind the container locks in the wooden floor, and rear in the end cross member) * Various holes for 1.2 t lashing points in front and rear cross members ----Ramps: * 1 pair of aluminium slide-in ramps, approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Storage compartment at the rear, recessed in the chassis under the loading area ----Paintwork: * ---Chassis, drawbar, front wall, underrun guard, and rear supports hot-dip galvanized--- * Axles, air tanks, front support crank, and flange towing eye painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 39/2026

Durum: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at rear ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle ----Lighting / Electrical: * RDÜ Tire pressure monitoring system * Multi-voltage electrical system * LED tail lights 12 / 24 V * Removable rotating beacon at rear * 15-pin power connector ----General Attachments: * Side underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Stainless steel front mudguards (enclosed), as well as straight galvanized steel skirts at rear, each with splash protection * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Four stake pockets per side (stakes not included) with integrated lashing option ----Load Securing (La-Si-Package consisting of): * 2 lashing rings (6.4 t) front left and right on the main frame of the turntable platform * 6 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame * In corners 13.4 t, otherwise 10 t Dwsdpfxsl Th I As Ab Uea ----Widening: * 6 pairs of mechanical folding extensions for 3 m total width (excluding rear taper) * Widening planks stowed in center of cargo area ----Ramps: * Hot-dip galvanized, single-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically width-adjustable * 4-way valve block for retrofit of hydraulic lateral ramp shifting ----Cargo Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm approach slope) ----Tyres: * 235/75 R 17.5 twin tires ----Unladen Weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 19.0: Dwjdpfx Abol Th Hws Uja ----Braking System: * Wabco EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs - 110 mm wide - with tandem equalizing unit ----Drawbar / Flange Eye: Drawbar with 50 mm flange eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin power connector * LED rear lights * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear at front * Outward folding rear support legs * Side underrun protection * Plastic quarter mudguards ----Low-loader Deck: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Foldable, trapezoidal-profile steel side walls with drop-side lifting assist * Slide-in steel rear wall between the ramps (storage bracket at the front when not in use) * Screw-mounted rear stanchions ----Load Securing: * Perforated outer frame, angled approx. 45 degrees, with 2 t lashing points every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 10 t lashing ring at each front and rear corner; various holes in the front and rear crossmembers for 1.2 t lashing points * Profifix lashing rail centrally along the longitudinal axis for lashing loads up to LC 3,000 daN ----Ramps: * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be retracted to 20 mm) * Rear ramp approach angle approx. 860 mm ----Painting: * Chassis, drawbar, bulkhead, rear wall, loading ramps and folding supports hot-dip galvanized * Side walls painted in RAL 9010 pure white * Side wall painting in any RAL color available at extra charge * Axles, springs, air tanks, flange eye and landing gear painted black ----Info: * New vehicle with full manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Immediately available ex Egestorf on the A7

Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) Dwjdpfxsxf Skps Ab Usa ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: Dodpfxexf Skvo Ab Ujwa * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durum: yeni, azami yük ağırlığı: 8.900 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in B-dimension approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 removable LED beacon (incl. holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign packages front and rear * Landing gear at front * External folding rear supports * Plastic toolboxes approx. 750 x 350 x 300 mm on left and right sides * Side underrun protection * Rear underrun protection * Plastic quarter fenders ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable, locked dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) with an overall external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t drop-lashing brackets possible every 600 mm – fitted with 5 x 3 t UVV lashing brackets on each side – * Each front and rear corner fitted with 1 x 6.3 t lashing ring (front just behind the container locks in the wooden floor, rear on the end member) * Various holes in the front and rear member for 1.2 t lashing options ----Ramps: * 1 pair of aluminium slide-in ramps, approx. 3,310 x 410 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Rear accessible storage compartment under the loading area integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front landing gear, and flange towing eye painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images Dwsdpfoy U A Elox Ab Uja ----Delivery Time: * Available from approx. week 38/2026

Durum: yeni, azami yük ağırlığı: 8.900 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Platform: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B-dimension approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 LED beacon (removable, incl. holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign sets front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each side left & right * Side underride protection * Rear underride guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable up to 3 m container outer width) and lockable, locking dimension retracted as per ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm ----Load Securing: * Perforated outer frame angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible - laterally, 5 x 3 t UVV lashing rings on each side installed * In each corner front and rear, 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end beam) * Various bores in the front and end beams for 1.2 t lashing points ----Ramps: * 1 pair of aluminum slot-in ramps approx. 3,310 x 410 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Rear stowage compartment integrated under the loading area in the chassis ----Coating: * ---Chassis, drawbar, front wall, underrun protection as well as rear supports hot-dip galvanized--- * Axles, air tanks, front support winch as well as flange drawbar eye painted in a black tone ----Information: Dsdpfx Abjy U A Efj Ujwa * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample pictures ----Delivery time: * Available from approx. week 38/2026

Durum: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Braking System: * EBS (Electronic Braking System) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B-dimension approx. 8,080 mm) * 40 mm flange towing eye ---- Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 removable LED rotating beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign packages at the front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, mounted left & right side * Side underrun protection * Rear underrun guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) at an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm – 5 x 3 t UVV lashing brackets installed per side * In the corners at the front and rear, one 6.3 t lashing ring each (front directly behind the container locks in the wooden floor, rear in the end crossmember) * Various bores in the front wall and end crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminum drive-on ramps approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tired and tracked vehicles Djdpfx Aov D Tbdeb Uswa * Rear storage compartment below the loading area, integrated in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun guard, and rear supports hot-dip galvanized--- * Axles, air tank, front support winch, and flange towing eye painted in a shade of black ----Additional Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 39/2026

Durum: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0 ----Brake System: * EBS braking system * Emergency release for spring-actuated brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle equalization at the rear ----Drawbar: * Drawbar with 50 mm draw eye and height adjustment via tension spring & turnbuckle ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED tail lights 12 / 24 V * Removable beacon at the rear * 15-pin power connector ----General Attachments: * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front: enclosed plastic mudguards; rear: straight galvanized steel mud flaps, each with splash guards * Tool box made of galvanized steel sheet, black powder-coated, approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox on the turntable platform * Four stake pockets per side (stakes not included), each with integrated lashing option ----Load securing (La-Si package comprises): * 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions, recessed into the outer frame * 13.4 t at the corners, otherwise 10 t ----Widening: * 6 pairs of mechanical folding outriggers for a total width of 3 m (not at the rear chamfer) * Widening planks stored in the middle of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way valve block for retrofitting hydraulic side ramp displacement ----Loading area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm entry slope) ----Tyres: * 235/75 R 17.5 twin tyres Dwsdpfx Asl Th Nnjb Uja ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black ----Information: * Permissible gross weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: Immediately available ex Egestorf

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 2.140 kg, azami yük ağırlığı: 12.260 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, süspansiyon: çelik, lastik boyutu: 285/ 70 R 19,5, dingil mesafesi: 1.140 mm, römork freni: frenli römork, Üretim yılı: 2026, - TM-TA 14.4: - incl. 2 ratchet tensioners permanently mounted on the outer frame with chain box, each side with eyelet and quick-shortener in Y-special version, 6.3 t - Tensioning force with load securing certificate - Wabco EBS - RDÜ tire pressure monitoring system - Emergency release device for spring brake cylinders - Drum brakes - 2 x 7 t Gigant axles - Parabolic springs with compensation unit - Jost landing gear at the front - 2 x external folding supports at the rear - Height-adjustable hot-dip galvanized drawbar +/- 150 mm - Hot-dip galvanized chassis - 15-pin electrical connector - LED tail lights - Enclosed single plastic mudguards - Foldable A-panel at the rear - Plastic impact protection buffers on underrun protection - Hot-dip galvanized underrun protection with integrated chain storage box B = 370 mm x D = 420 mm x H = 480 mm, front left & right - 2 interchangeable skip stops for centering skips laterally Dwodpfxexuhy Eo Ab Usa - Skip stops at the front with pendulum stop, insertable in 4 positions - 2 x 5.3 t UVV lashing rings per side for attaching tensioning elements - Axles, springs, air tanks, and landing leg painted in black - Subject to errors and prior sale - New vehicle with manufacturer’s warranty - Available from calendar week 05 / 2026

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 2.140 kg, azami yük ağırlığı: 12.260 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 285/ 70 R 19,5, dingil mesafesi: 1.140 mm, Üretim yılı: 2026, - TM-TA 14.4: - Wabco EBS - RDÜ tire monitoring system - Emergency release device for spring brake cylinders - Drum brakes - 2 x 7 t Gigant axles - Parabolic suspension with equalizing unit - Jost support winch at the front, 2 x external drop-down supports at the rear - Height-adjustable +/- 150 mm hot-dip galvanized drawbar - Hot-dip galvanized chassis - 15-pin power connector - LED tail lights - Enclosed plastic single fenders - Folding A-sign at the rear - Plastic impact protection buffers on the underride guard - Hot-dip galvanized underrun protection with integrated chain storage box (W = 370 mm x D = 420 mm x H = 480 mm) front left & right - 2 relocatable trough stops for lateral centering of the containers - Front container stops with pivoting stop, insertable in 4 positions Dedpfjxu Hplex Ab Uswa - On each side, 2 x 5.3 t UVV lashing rings for attaching securing elements - Axles, springs, air tanks, and support winch coated in black - Errors and prior sale excepted - New vehicle with manufacturer's warranty - Available from week 05 / 2026

Durum: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, Üretim yılı: 2026, RA-T 18,0: Önden ve arkadan yüklenebilir ----Fren: * Wabco EBS-E (elektronik fren sistemi) * Yaylı akümülatör silindirleri için acil serbest bırakma mekanizması * 19,5" disk frenler * Enine bağlantı üniteleri açıldığında otomatik frenleme ----Akslar: * 2 x 10 ton BPW geniş izli akslar ----Süspansiyon: * Hava süspansiyonu (fren serbest bırakıldığında otomatik alçalma) ----Elektrik / Aydınlatma: * Lastik basıncı izleme sistemi, EBS sinyali üzerinden kamyonda görüntüleme imkanı sağlar -kamyon tarafında herhangi bir kurulum gerektirmez- * 15 kutuplu elektrik fişi * Koruyucu kapaklı LED aydınlatma sistemi * 2 LED geri vites lambası (geri vitese göre devreye girer) ----Çekme Çubuğu: * Pnömatik olarak alçaltılabilen, 1.800 mm uzunluğunda, 40 mm çekme bağlantısı ve yay ve gerdirme kilidi aracılığıyla yüksek ayarlı çekme çubuğu ----Genel Montaj Parçaları: * 858 x 500 x 500 mm boyutlarında, sağ tarafta plastik alet kutusu * Galvanizli delikli sacdan yapılmış, 1.000 x 500 x 500 mm boyutlarında, yandan monte edilmiş konteyner ağı saklama kutusu * Kapalı plastik çamurluk (ön ve arka) * Kapalı, yandan çarpma koruması (RAL 9010 saf beyaz), reklam alanı olarak kullanılabilir * Arkada alt geçiş koruması * Arkada plastik tampon * Katlanabilir A tabelası * Tehlikeli madde etiketi, eşlik eden belge cebi ve arkada yansıtıcı park uyarı tabelası ----Konteyner Alanı: * Önden ek yükleme imkanı, arkada ray alçalması ve takılabilir durdurucu * Döner halka alanında, mekanik olarak ayarlanabilir durdurucu açılarla (2 pozisyon) ön sol ve sağ taraftaki raylarda çukurlaştırmalar * Ray uzunluğu yaklaşık 6.830 mm * Pnömatik 4'lü kelepçe kilidi * DIN 30722 Bölüm 1'e göre dış silindir kaplarının taşınması için -Dekra yük sabitleme sertifikası mevcuttur- ----Yükseklik: * Yüklü halde yaklaşık 1.130 mm ----Boya: * Şasi ve kilitleme parçaları sıcak daldırma galvanizli * Hava tankı, akslar, döner halka ve çekme çubuğu siyah renkte boyanmıştır Dwsdpfx Ael Tn U Rsb Uea ----Bilgiler: * --20.000 kg toplam ağırlık teknik olarak mümkündür-- * İlk tescilsiz yeni araç, üretici garantisi ile * Hatalar ve ön satışlar saklıdır * Örnek resimler ----Teslim Süresi: * Egestorf'tan hemen teslim edilebilir

Durum: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E braking system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake coupling ----Axle: * 2 x ton SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with ride height +30 mm via actuator cylinder * Start-up assist for manoeuvring and forced lowering to the first axle – controlled via speed-dependent EBS electronics – (no truck-side installation required, includes cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flanged towing eye – height-adjustable by +77 mm and -33 mm – for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary socket * LED lighting system 12 / 24V * 2 LED reversing lights, activated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Radio remote power supply 12+24 V via tail light ----General Attachments: * BPW landing gear front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminium rims * Drop-in-pin towing coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell individual mudguards * Two-step access in front of the bulkhead, left side * Shovel and broom holder in front of the bulkhead * 2 stainless steel toolboxes – matt finish – approx. 650 x 350 x 320 mm, right-hand side * Enclosed side underrun protection can be used as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor) rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right-hand side front) with operation via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame made of high-tensile fine-grain steel * 20,000 kg pulling force * Hook height 1,570 mm * Control of the hooklift device via remote control * Remote control with fast function when unloading but not when loading * Emergency stop buttons on both left and right sides * Container saddle with 4 supports per side and 1 roller at the rear per side * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist with main arm lifting Dodpfxsx Dp Atj Ab Uewa * 2 x mechanical drop-down supports at the rear * Approved for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the charging cradle, the service brake must be applied to enable wireless release. The brake connections must remain coupled in order to operate the hydraulically/pneumatically controlled valves. * Monitoring system for underrun protection to ensure it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, step, underrun protection and drop supports hot-dip galvanized * Axles, air tanks, front landing gear painted in black * Palfinger hooklift painted black/yellow ----Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is available immediately

Durum: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Tow Bar / Flange Drawbar Eye: * Height-adjustable tow bar (+/- 150 mm) * 40 mm bolted drawbar eye ----General Attachments: * Jost landing gear at the front * Side underrun protection * Foldable rear A-plate ----Electrics / Lighting: Dedsl Th Dmepfx Ab Uowa * 15-pin electrical connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding sheet metal plate 750 x 1,000 mm at the front, including 2 removable trough stops at the front, insertable in 2 positions * Rear traverse for mounting aluminum loading ramps, including 2 additional rear drop stands ----Loading Edge: * Unladen loading height approx. 710 mm ----Load Securing: * 4 repositionable trough stops, insertable in 2 positions for lateral centering of the troughs * On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, tow bar, and rear drop stands hot-dip galvanized * Axles, springs, landing gear, and air tanks painted in black ----General Information: * Vehicle has a one-day registration in 06/2024 due to missing tire pressure monitoring system, and has not been loaded or used * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf on the A7

Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Braking System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye ----General Accessories: * Jost mechanical support winch at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic tool box, approx. 750 x 350 x 300 mm, mounted laterally on the right * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Body: * Mesh hooks on the side and rear at the central locking mounts, plus 2 on the front wall * Three-way steel pallet tipper body (continuous side walls – no center stanchions – can be folded down with board wall spring lifter) * Rear stanchions bolted * Combo steel wing doors, rear, 2-leaf, asymmetrically split, can pivot and lock up to 270°, not foldable, plus with additional swinging frame for automatic rear flap opening during tipping; locking via galvanized turn bar lock and central locking system * Deactivation function for automatic rear flap operation when tipping in reverse with the wing door open * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment accessible from the rear, recessed under the loading area in the chassis ----Paintwork: Dwodsl Thyxspfx Ab Usa * Drawbar, front wall, tipper bed, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Painting of side walls in a different RAL color available at extra charge * Axles, springs, flange eye, air tanks, and support winch painted black ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle, unregistered, with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex Egestorf on the A7

Durum: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4: ----Braking System: * Wabco ABS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: Djdpfx Aol Th Eyob Ujwa * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolted towing eye ----General Attachments: * Jost landing gear at the front * Side underrun protection * Foldable rear A-shield ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made from 50 mm softwood * 1 sliding plate 750 x 1,000 mm positioned at the front, incl. 2 moveable trough stops at the front (plug-in, 2 positions each) * Rear crossmember suitable for use with aluminum approach ramps, incl. 2 additional drop-down supports at the rear ----Loading Edge: * Unladen loading edge approx. 710 mm ----Load Securing: * 4 repositionable trough stops, can be plugged into 2 positions for lateral centering of the troughs * On each side: 1 x (13.5 t) UVV tie-down point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with equalizing chain and quick-shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized * Axles, springs, landing gear, and air reservoir painted in black ----General Information: * The vehicle has a day registration from 06/2024, has not been in use or loaded due to the absence of a tire pressure monitoring system * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately ex Egestorf on the A7