Kullanılmış Müller-Mitteltal Etütar 14,4 Tieflader, Led, Runduml. satın al (12.764)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Alsdorf
2.622 km
Alçak şasi römork
MÜLLER-MITTELTALETÜTAR 14,4 Tieflader, LED, Runduml.
Ara
Durum: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform | Trailer
Available in 37th week of 2026. Inquiry no.: 31941. Delivery to your address possible.
* We are happy to provide a tailored offer.
* -----
* Gross weight: 14.4 t, Payload: 10.95 t
Fpjdpfx Aezbfmqoqteh
* LED lighting system
* GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs
* Tire pressure monitoring system (TPMS)
* 6.27 m x 2.47 m platform with galvanized 400 mm front wall
* Digger bucket rest made of hardwood bolted to the front wall
* Unladen deck height: 930 mm / Laden: 870 mm
* One-piece ramps with hot-dip galvanized anti-slip grating, adjustable to approx. 20 mm width, secured by holding rods and diagonal supports
* Ramp lift with vertically mounted, adjustable springs for convenient single-operator use
* 4 UVV drop lashing rings (LC 6300 daN)
* Perforated outer frame (45° angled, with lashing holes; lashing point load capacity LC 2000 daN at minimum 480 mm spacing). Installation of drop lashing rings LC 3000 daN approx. 600 mm apart possible. Tight crossmember spacing, high-profile front & rear ends with rear loading slope, hot-dip galvanized
* 10 UVV lashing rings LC 3000 daN, retractable in the existing hole pattern on the outer frame, in addition
* Additional lashing options via drilled holes (Ø 50 mm, LC 1200 daN) in front and rear beams
* Toolbox mounted in front of the front wall
* Side marker lights with indicator function
* 50 mm thick softwood floor. Chassis hot-dip galvanized
* Height-adjustable landing gear at the front, folding supports at the rear
* 2 container locks recessed in the front crossmember
* Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable. 50 mm towing eye available on request
* 1 removable LED beacon at the rear
-----
* Leasing, hire purchase, financing, trade-in available
* Example: €525 per month, 60-month term, no down payment, no final installment
-----
* Our opening hours:
* Monday – Thursday: 08:00 – 17:00
* Friday: 08:00 – 15:00
Outside of opening hours, appointments are possible by arrangement.
We speak German, English, Polish, French.
Leasing, financing, and trade-in available.
Küçük ilan
Alsdorf
2.622 km
Çalışma platformlu römork
MÜLLER-MITTELTALETÜ-TA-R 21 Tieflader 7m, luftgefedert, LED
Ara
Durum: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low Loader? Drive-Over Flatbed Trailer
Enquiry Reference: 11630. Vehicle available immediately from Alsdorf stock
Fpsdpjyvxg Ujfx Aqtoh
?BRAND NEW VEHICLE incl. COC
* Gross weight: 21 t, payload: 16.50 t, galvanized chassis
* Flatbed design with 400 mm high front wall, ramp locking via ramp support bars and diagonal bracing
* 21 t gross weight version with reinforced frame and axles, axle spacing 1,810 mm
* Deck height approx. 910 mm loaded / approx. 940 mm unladen
* 7 m loading platform with 400 mm high front wall
* Extended ramps: 3 m single-piece, hot-dip galvanized steel ramps with galvanized grating
* Ramp lifters with vertically mounted, adjustable springs for easy single-person operation
* Load securing package:
* 4 UVV drop-forged lashing shackles (LC 8,000 daN) fitted to the existing hole pattern in the 45° outer frame; positioned approx. 1 m from front/rear cross member
* 10 UVV lashing shackles LC 3,000 daN, retractable into the existing hole matrix in the outer frame
* 2 UVV lashing rings each at front + rear, recessed in the cross member, LC 10,000 daN
* Additional lashing options via holes (Ø 50 mm, LC 1,200 daN) in the front and rear end cross members
* Device for retrofitting container locks (container locks available and possible at extra cost)
* 50 mm thick softwood floor
* Gigant air suspension axles incl. EBS 2S/2M, raise and lower function
* 235/75R 17.5 (8x) twin tyres with tyre pressure monitoring sensor
* Plastic toolbox in front of the bulkhead on the right, in the direction of travel
* LED lighting system
* 7-pin socket at rear, pre-wired for overlength lighting with tail light (58 R) and ground
* 2 LED reversing lights at rear
* Side marker lights with flashing function
* Warning panel for oversize loads
* 1 removable round LED beacon incl. bracket and installation
* Rear folding supports, front support leg with geared crank
* ----
Lease-purchase example from our partner MMV Leasing: ¤ 665/month net, 60 months term, no down payment and "0" Euro final value
Other terms with/without down payment/residual value possible!
We are an official MüllerMitteltal dealer
----* Opening hours:
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
* Outside opening hours by appointment
* We speak German, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle francais
* WhatsApp
Küçük ilan
Alsdorf
2.622 km
Alçak şasi römork
MÜLLER-MITTELTALETÜ-TA-R 11,9 Tieflader, LED, Rundum
Ara
Durum: yeni, azami yük ağırlığı: 8.770 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, * Müller-Mitteltal ETÜ-TA-R 11.9 Low-loader Tandem Trailer / Ramps
* NEW VEHICLE, no initial registration,
* Now available immediately in RAL 7016 Anthracite,
Reference number for inquiries: 11653
Fjdpfx Aoyxbdbjqtjph
* GVW: 11.9t, Payload: 8.77t
* Reinforced and certified structure according to EN 12642 XL, including load securing certificate
* 6.27m x 2.47m x 0.4m laser-welded steel side panels, foldable with 2 gas struts
* Front wall bolted, made from smooth sheet metal (hot-dip galvanized)
* Rear wall: (hot-dip galvanized) slides in front of the ramps; storage for rear wall behind front wall
* Rear stakes bolted (hot-dip galvanized)
* Softwood flooring, 50mm thick
* 4 UVV lashing rings (LC 6300daN), flush-mounted at the front and rear in the cross member
* 10 UVV lashing brackets (LC 3000daN), flush-mounted in the existing perforated pattern on the outer frame
* Ramps: one-piece design with hot-dip galvanized anti-slip grating
* Preparation in front of the front wall for retrofitting container locks
* Plastic toolbox mounted in front of the front wall
* Chassis and drawbar hot-dip galvanized
* 235/75 R17.5 twin wheels, parabolic leaf springs
* BPW axles, with tire pressure monitoring system
* EBS 24 Volt
* Height-adjustable drawbar (hot-dip galvanized) with 40 mm towing eye
* 2 LED reversing lights mounted at the rear of the trailer
* LED lighting system for 12V and 24V
* Side marker lights with indicator function
* 1 removable LED rotating beacon (warning light) incl. bracket and installation
----
* Trade-ins possible
* Financing options available via our partners, with or without down payment or final installment, different terms possible. Request a quote today!
----
* Example hire-purchase offer from our partner FM LeasingPartner: €485/month net, 60 months term, with no down payment and "0" euro residual value. Other terms, with or without down payment/residual value, available. Request your offer today!
We are authorized Müller-Mitteltal dealers!
----
* Our Opening Hours:
* Monday – Thursday: 08:00 – 17:00
* Friday: 08:00 – 15:00
* Outside these hours we are available by appointment.
* We speak German, English, Russian, Polish, French.
Küçük ilan
Schwebheim
2.317 km
Üç yöne devirmeli römork
Müller MitteltalTA-2 14,4 t Tandemkipper- Tieflader Breitbereifung NEUWERTIG
Ara
Durum: ikinci el, boş ağırlık: 3.680 kg, azami yük ağırlığı: 10.720 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2021, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, süspansiyon: çelik, lastik boyutu: 385/55R19,5 156J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/55R19,5 156J, arka lastik boyutu: 385/55R19,5 156J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, YENİ GİBİ, geniş lastik, GALVANİZLİ damper kasası, 12 adet sabitleme halkası, 600 mm yan paneller, rampalar için ek ücret 1.000 €, -- Baskı hataları, yanlışlıklar ve değişiklik hakkı saklıdır, örnek görseller --, Daha fazla veri için: !, Detaylı bilgi: !
Fpedpfx Aqozb Ntbsteh
Küçük ilan
Schwebheim
2.317 km
Üç yöne devirmeli römork
Müller Mitteltalka-ta-r 14,4 14,4 t Tandemkipper- Tieflader, Breitbereift
Ara
Durum: ikinci el, boş ağırlık: 3.550 kg, azami yük ağırlığı: 10.850 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2012, bir sonraki muayene (TÜV): 04/2027, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, süspansiyon: çelik, lastik boyutu: 385/55R19,5 150J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/55R19,5 150J, arka lastik boyutu: 385/55R19,5 150J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Bağlama halkaları, geniş lastik donanımı, -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler --, Daha fazla bilgi için: !, Detaylar: !
Fpjdpfx Aqjzatxletjh
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Ara
Durum: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 ton Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange Eye:
* Drawbar height adjustable by 300 mm
* Drawbar extension by 250 mm up to 2,250 mm
----Electrics / Lighting:
* Tire pressure monitoring with display option in truck via EBS signal - no installation required on truck side
* 15-pin power plug
* LED lighting system 12 / 24 V
* EBS multivoltage system for towing vehicles with 12 and 24 V electrics
----General Attachments:
* Support winch at the front
* Fold-out support legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, front right, mounted on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Provision for subsequent installation of container locks in front of the bulkhead
* Bolted 400 mm bulkhead made from smooth sheet
* Rear stakes bolted
* Side boards with spring-assist lifting
----Load Securing:
Fjdpferwc R Rjx Aqtjph
* Perforated outer frame, approx. 45 degrees angled, with 2 tonne lashing force every 480 mm
* Installation of 3 tonne folding lashing rings possible every 600 mm
* Each corner at front and rear equipped with 1 x 6.3 tonne lashing ring
* Various drillings in front and rear cross members for 1.2 tonne lashing option
* Profifix lashing rail centrally along the longitudinal axis for securing up to LC 3000 daN
----Ramps:
* One-piece hydraulic mesh ramps, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Hydraulic flow divider in the trailer (for truck-side hydraulic pump flow rates over 40 l/min up to max. 140 l/min)
----Paintwork:
* Chassis, drawbar, front wall, mechanical supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, front support winch, and flange-eye painted in black
* Side boards painted in RAL 9010 pure white
* Painting of side walls in any RAL color available at extra charge
----Info:
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
----Delivery time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking System:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizer unit
----Drawbar / Flange Tow Eye:
* Drawbar height-adjustable by 300 mm
* Drawbar extension by 250 mm up to 2,250 mm
* 40 mm flange tow eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin power connector
* LED lighting
----General Attachments:
* Landing gear at the front
* Fold-out stabilizer legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside at the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* At the front bulkhead and rear incline, provision for retrofitting container locks for transporting 20'' containers
* Bolted bulkhead made of smooth sheet metal
* Drop-side walls made of trapezoidal steel sheet, central split, folding
* Steel rear wall - insertable between the ramp mounts, can be stowed inside at the front bulkhead when not in use
* Rear stakes bolted
----Load Securing:
* Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm
* Option for installation of 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each corner, front and rear
* Various holes in the front and end cross-members for 1.2 t lashing options
* Profifix lashing rail, centrally along longitudinal axis, for securing up to LC 3000 daN
----Ramps:
* One-piece mechanical mesh ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be closed to 20 mm)
Fpodpfx Ajv Eq Evjqtjh
* Rear approach angle, approx. 860 mm chassis
----Wheelbase:
* Wheelbase 1,140
----Paintwork:
* Drawbar, bulkhead, rear flap, folding legs, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange tow eye and landing gear painted black
* Side walls painted to RAL color of choice (excluding special or metallic colors), changeable up to approx. 6 weeks before completion
----Information:
* Reinforced and certified body according to EN 12642 XL including load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 30 / 2026
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4
----Brake System:
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Drawbar / Flange Eye:
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* 40 mm flange drawbar eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED tail lights 12/24 V
* 15-pin socket
----General Attachments:
* Jost landing gear at front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox at the front right on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Bed:
Fjdpfoq Dyvyox Aqtjph
* 50 mm softwood flooring
* Fitting for retrofitting container locks in front of the front wall
* Bolted front wall made from smooth steel sheet
* Side walls made from profiled sheet steel, foldable with drop-side spring assistance
* Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use
* Rear stakes bolted
* Beveled rear drive-on angle approx. 860 mm
----Load Securing:
* Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm
* Option to install 3 t drop lashing rings every 600 mm
* 1 x 6.3 t lashing eye at each front and rear corner
* Various holes in front and rear cross-member for 1.2 t lashing points
----Ramps:
* One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm)
----Painting:
* Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps
* Drop-side color in RAL 9010 pure white
* Painting of side walls in a RAL color of choice available at extra charge
----Information:
* -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate --
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4
----Brakes:
* EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
Fpedpfx Aqopk Dv Rjteh
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Drawbar / Flanged towing eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flanged towing eye
----Lighting / Electrics:
* RDÜ (Tire Pressure Monitoring System)
* LED taillights 12/24 V
* 15-pin electric connector
----General Attachments:
* Jost landing gear at front
* External hot-dip galvanized folding support legs at rear
* Plastic toolbox, front right outside on front wall
* Side underrun protection
* Plastic quarter mudguards
----Low-bed loading area:
* 50 mm softwood floor
* Preparation in front of bulkhead for later installation of container locks
* Bolt-on smooth steel front wall
* Side walls made of trapezoidal steel sheet, foldable, with drop side lifting device
* Steel rear wall, insertable between ramp mounts; when not in use, stored inside in front of bulkhead
* Bolt-on rear stanchions
* Rear approach angle approx. 860 mm
----Load securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Provision for fitting 3 t lashing rings every 600 mm
* In each corner at front and rear: 1 x 6.3 t lashing ring
* Various drilled holes for 1.2 t lashing points in front and rear crossmembers
----Ramps:
* One-piece mechanical grid ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (collapsible to 20 mm width)
----Paintwork:
* Hot-dip galvanized chassis, drawbar, front wall, rear wall, tailgate, and ramps
* Drop side color in RAL 9010 pure white
* Painting of side walls in a RAL color of your choice available at extra cost
----Info:
* --Reinforced and certified body according to EN 12642 XL, including load securing certificate--
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release device for spring brake cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange towing eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding support legs at the rear
* Plastic toolbox installed on the right front exterior of the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood flooring
* Prepared fixture in front of the bulkhead for later installation of container locks
* Bolt-on bulkhead made from flat sheet steel
* Drop-down side panels made from trapezoidal steel sheets with sideboard spring assist
* Steel rear panel can be inserted between ramps – storage holder provided inside the bulkhead when not in use
* Rear stanchions bolted
----Load securing:
* Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashings every 600 mm
* In the corners (front and rear), each fitted with 1 x 6.3 t lashing ring
* Various drill holes in the bulkhead and end cross member for additional lashing points at 1.2 t
----Ramps:
* One-piece mechanical mesh ramps with spring assist for one-person operation, approx. 2,750 x 600 mm (can be retracted to 20 mm thickness)
* Rear approach angle approx. 860 mm
----Painting:
* Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear panel
* Side panel color in RAL 9010 pure white
* Side panel painting in another RAL color available at extra cost
----Information:
Fsdsxglibjpfx Aqtsph
* --Reinforced and certified bodywork according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
----Delivery time:
* Available from approx. CW 30/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking system:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange drawbar eye:
* Drawbar adjustable in height by approx. 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* 40 mm flange drawbar eye
----Lighting / Electrics:
* TPMS (Tyre Pressure Monitoring System)
* LED lighting
----General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox on the front right outside of the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood floor
* Preparation in front of the front wall for subsequent installation of container locks
* Bolted front wall made of smooth sheet metal
* Drop sides made of trapezoidal sheet steel, foldable with side board spring lifter
* Rear wall made of steel, slidable between the ramps – storage bracket inside front wall when not in use
* Removable rear stanchions (bolted)
----Load securing:
* Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various mounting holes in front crossmember and rear end carrier for 1.2 t lashing points
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be nested up to 20 mm)
* Rear approach slope approx. 860 mm
----Paintwork:
Fpsdexglh Repfx Aqtoh
* Hot-dip galvanized chassis as well as drawbar, front wall, ramps, and rear wall
* Platform side wall color in RAL 9010 pure white
* Painting of the side walls in any RAL color available at extra cost
----Info:
* --Reinforced and certified structure according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from approx. week 30/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Ara
Durum: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange eye:
* Height-adjustable drawbar by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
Fedporwc R Asfx Aqteph
----Electrics / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required)
* 15-pin electrical connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
----General fittings:
* Support winch at the front
* External folding supports at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm mounted externally to the right front bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood floor
* Fixture in front of bulkhead for subsequent installation of container locks
* 400 mm bolt-on smooth steel front bulkhead
* Bolt-on rear stanchions
* Drop sides with spring assist
----Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each of the front and rear corners
* Various holes in front and rear crossmember for 1.2 t lashing option
* Profifix lashing rail installed centrally in longitudinal axis for lashing up to LC 3000 daN
----Ramps:
* One-piece hydraulic grating ramps approx. 2,750 x 600 mm (can be collapsed to 20 mm gap)
* Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 l/min up to max. 140 l/min)
----Paintwork:
* Chassis, drawbar, front bulkhead, mechanical drop supports, and ramps galvanized
* Axles, springs, air tank, front support winch, and flange towing eye painted black
* Drop sides painted in RAL 9010 pure white
* Side walls painted in any RAL color at extra cost
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Sample images
----Delivery time:
* Immediately available from Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
Fpedpfxev D Tcbo Aqtoh
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm, total length 2,250 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin electrical connector
* LED lighting
----General Attachments:
* Support winch at the front
* Fold-out external support legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Preparation for retrofitting container locks in front of bulkhead and rear slope for transporting 20" containers
* Bolted smooth steel bulkhead
* Side walls made of trapezoidal steel sheet, split and foldable once in the center
* Rear wall made of steel, can be slid and stored between the ramp holders when not in use, inside in front of the bulkhead
* Rear stanchions bolted
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to fit 3 t folding lashing eyes at 600 mm intervals
* In each front and rear corner: one 6.3 t lashing ring
* Multiple holes for 1.2 t lashing options in front and rear crossmember
* Profifix lashing rail along centerline for lashing up to LC 3,000 daN
----Ramps:
* One-piece mechanical grating ramps with spring assist for one-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm thickness)
* Rear approach angle approximately 860 mm on chassis
----Wheelbase:
* Wheelbase 1,140 mm
----Paintwork:
* Drawbar, bulkhead, tailgate, support legs, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and support winch painted in black
* Side walls painted in RAL color of choice (no special or metallic paints), can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced and certified body according to EN 12642 XL, including load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 30 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking System:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with balance mechanism
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, 300 mm range
* Drawbar extension of 250 mm (total length 2,250 mm)
* 40 mm flange towing eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding support legs at the rear
* Plastic toolbox, front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted flat sheet steel bulkhead
Fsdpfxsq Dyvvo Aqtjph
* Sidewalls made of trapezoidal-profiled steel, foldable with drop side spring assist
* Steel rear wall, retractable between the ramps – storage bracket on the inside of front bulkhead when not in use
* Rear stakes bolted
----Load Securing:
* Perforated outer frame, approx. 45-degree angled, with 2 t lashing force every 480 mm
* Option to install 3 t flip lashing rings every 600 mm
* Each front and rear corner with 1 x 6.3 t lashing ring
* Various holes in bulkhead and rear crossmember for additional 1.2 t lashing possibilities
* Profifix lashing rail along the longitudinal axis (center) for lashing loads up to LC 3,000 daN
----Ramps:
* One-piece mechanical grating access ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm overall height)
* Rear approach angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis including drawbar, bulkhead, ramps, and rear wall
* Sidewall color in RAL 9010 pure white
* Painting of sidewalls in a different RAL color available at additional cost
----Information:
* --Reinforced and certified body in accordance with EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from calendar week 29/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release mechanism for spring-loaded actuators
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalization unit
----Drawbar / Drawbar Eye:
* Height-adjustable drawbar (adjustable by approx. 300 mm)
* Drawbar extension by 250 mm (up to 2,250 mm)
* 40 mm flange-type towing eye
----Lighting / Electrics:
* Tire pressure monitoring system (TPMS)
* LED lighting
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox at the front right, mounted on the outside of the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Deck:
* 50 mm softwood floor
* Provision in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made from smooth sheet metal
* Drop sides made of trapezoidal-profile steel sheet, folding down with sideboard spring assist
* Rear wall made of steel, can be inserted between the ramps (storage bracket for non-use inside in front of the bulkhead)
* Rear stanchions bolted
----Load securing:
* Perforated outer frame, angled approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Option to install 3 t retractable lashing rings every 600 mm
* One 6.3 t lashing ring front and rear, in each corner
* Various drilled holes in the front and rear crossmember for 1.2 t lashing points
* Profifix lashing rail along the longitudinal axis, centered, for lashing up to LC 3000 daN
----Ramps:
* One-piece mechanical steel grid loading ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm)
* Rear approach angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis including drawbar, bulkhead, loading ramps, and rear wall
* Sideboard color in RAL 9010 pure white
* Painting of side panels in an RAL color tone available at extra cost
Fsdjrvvflepfx Aqteph
----Information:
* Reinforced and certified body according to EN 12642 XL, including load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from approx. calendar week 29/2026
Küçük ilan
Wardenburg
2.588 km
Alçak şasi römork
MÜLLER-MITTELTALTandem Tieflader ETÜ TA R 11,9
Ara
Durum: yeni, azami yük ağırlığı: 8.770 kg, Üretim yılı: 2025, ABS Müller Mitteltal ETÜ TA R 11.9 Tandem Low Loader with Numerous Extras
Fpjdpfx Aqoxcxmfotoh
Equipment:
- 2 spring-assisted lifts for 400mm high steel drop sides
- Reinforced and certified superstructure in accordance with EN 12642 XL load securing certification
- 10 UVV lashing rings in pre-existing lashing point grid in the outer frame
- Additional wooden flooring in clamped design
- Tyres 235/75R17.5
- Four BPW axles instead of GIGANT
- Platform extension by 870 mm to a total length of 6,270 mm
- One-piece ramps with hot-dip galvanized anti-slip grating
- Lockable toolbox with a load capacity of 45 kg
Paintwork:
- Wheels: silver
- Chassis/front wall/drawbar/rear wall/stakes/ramps: hot-dip galvanized
- Axles/springs: black
- Side walls: RAL2011 deep orange
We are pleased to offer you suitable financing, hire purchase, or leasing options. Delivery or dispatch available upon request. We always have a selection of new units in stock as well as demo units. Contact us! We rent vehicles and machinery with or without drivers. A wide range of used machines and devices always available. Technical changes, errors, and prior sale reserved.
Küçük ilan
Alsdorf
2.622 km
Alçak şasi römork
MÜLLER-MITTELTALETÜ-TA-R 21 Plateau 7m, luftgefedert, LED
Ara
Durum: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TAR 21 Tandem – Low Loader / Drive-Over Platform Trailer
Ref. for inquiries: 27963, available end of March 2026
NEW VEHICLE including COC
* GVW: 21t, Payload: 16.50t, galvanized chassis
* Available end of March 2026
* Platform version with 400mm high front wall, ramp locking with ramp holding rods and diagonal supports
* Version with 21t GVW, reinforced frame and axle, axle spacing 1,810 mm
* Platform height approx. 910 mm loaded / approx. 940 mm unloaded
* Load area: 7,000 mm with 400 mm high front wall
* Extended ramps: 3,000 mm, single-piece hot-dip galvanized ramps with galvanized grating,
* Ramp lifting system with vertically mounted, adjustable springs for easy one-person operation
* Load securing package (La-Si-Paket):
* 4 x UVV-fall lashing rings (LC 8,000 daN) mounted in the existing 45° hole pattern in the outer frame, placed approximately 1 m from the front and rear cross members
* 10 x UVV lashing rings LC 3,000 daN, recessed in the existing hole grid in the external frame
* 2 UVV lashing rings each at the front and rear, recessed in the cross member, LC 10,000 daN
* Additional lashing options with Ø 50 mm holes (LC 1,200 daN) in front and rear cross members
* Prepared for retrofitting container locks
* Softwood (spruce/fir) floor, 50 mm thick
* Gigant axles with air suspension including EBS 2S/2M
* Lifting and lowering function
* 235/75R 17.5 (8 pcs) twin tires with tire pressure monitoring sensors
* 1 plastic toolbox positioned in driving direction right, in front of the front wall
* LED lighting system
* 7-pin socket at rear, pre-wired for long-load lighting with taillight (58R) and ground
Fpjdpeyuq R Usfx Aqtoh
* 2 LED reversing lights at the rear
* Flashing side marker lights
* Oversize load warning sign
* 1 removable all-round LED beacon including holder and installation
* Rear folding supports, front support foot with gear winch
----
Hire-purchase example from our partner MMV Leasing: €655 net per month over 60 months term with no down payment and zero final value
Other terms with/without down payment or residual value are possible!
We are an authorized MüllerMitteltal dealer
----
* Our opening hours:
* Mon-Thu: 08:00-17:00
* Fri: 08:00-15:00
* Outside these hours, we are available by appointment
* We speak German, English, Russian, Polish, and French
* Leasing, financing, trade-in possible
Küçük ilan
Schwebheim
2.317 km
Damperli treyler
Müller MitteltalKA-TA-T 13,5 t Tandemkipper- Tieflader
Ara
Durum: ikinci el, boş ağırlık: 3.320 kg, azami yük ağırlığı: 10.180 kg, toplam ağırlık: 13.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 12/2003, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 5.040 mm, süspansiyon: çelik, lastik boyutu: 285/70R19,5 148/145J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 285/70R19,5 148/145J, arka lastik boyutu: 285/70R19,5 148/145J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Bağlama halkaları, , Rampalar için ek ücret: 800 €, , -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler --, Daha fazla veri için: !,
Fodpfjzc Eqlsx Aqteph
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalPT 30 3 Achs Tieflader 9,20 m Ladefläche
Ara
Durum: ikinci el, boş ağırlık: 7.340 kg, azami yük ağırlığı: 22.660 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2012, yükleme alanı uzunluğu: 9.200 mm, süspansiyon: çelik, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Yükleme alanı uzunluğu yaklaşık 9.200 mm, yükseklik yaklaşık 900 mm, 16 adet bağlama halkası, araç sipariş üzerine satılmaktadır, baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler. Daha fazla bilgi için: !, More Details: !
Fodpfx Aezcvzusqtoph
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalT3 3 Achs Tieflader mit ABS
Ara
Durum: ikinci el, boş ağırlık: 5.750 kg, azami yük ağırlığı: 24.250 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/1993, süspansiyon: çelik, lastik boyutu: 235/75R17,5 141/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 141/140J, arka lastik boyutu: 235/75R17,5 141/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler --, Daha fazla veri için: !, Daha fazla detay: !
Fodpfxszcmtzs Aqtjph
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalT 3 3 Achs Tieflader- Anhänger
Ara
Durum: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2010, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Vehicle is being sold on behalf of a customer. Some wooden planks are damaged. 17 pairs of lashing rings. Loading height approx. 900 mm. -- Typographical errors, mistakes and alterations reserved, sample images -- More data at: !, More Details: !
Fodpfxezcmr Dj Aqtoph
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Schwebheim
2.317 km
Üç yöne devirmeli römork
Müller MitteltalKA-TA-RT 18,0 18 t Tandemkipper- Tieflader
Ara
Durum: ikinci el, boş ağırlık: 4.190 kg, azami yük ağırlığı: 13.810 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2016, süspansiyon: hava, lastik boyutu: 385/55R22,5 160J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/55R22,5 160J, arka lastik boyutu: 385/55R22,5 160J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Bağlama halkaları, 800 mm alüminyum yan duvarlar, rampalar için ek ücret 800 €, -- yazım hataları, değişiklik ve yanlışlık yapma hakkı saklıdır, örnek resimler --, Daha fazla bilgi için: !
Fodozb Ntzopfx Aqtjph
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalT4 Kompakt 40,0 4 Achs Tieflader- Anhänger
Ara
Durum: ikinci el, boş ağırlık: 8.850 kg, azami yük ağırlığı: 31.150 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 08/2019, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Yükleme alanı toplam uzunluğu yaklaşık 9.500 mm, alçak şasi yükleme alanı uzunluğu yaklaşık 7.360 mm, yükseklik yaklaşık 910 mm, 14 çift sabitleme halkası. Araç müşteri talebi üzerine sunulmaktadır. -- Yazım hataları, yanlışlıklar ve değişiklikler olabilir, örnek görsellerdir. Daha fazla veri için: !, Detaylar için: !
Fpodpfx Aezb Ntheqtjh
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalT 3 3 Achs Tieflader- Anhänger
Ara
Durum: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2010, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Vehicle is being sold on behalf of a customer. Some wooden planks are damaged. 17 pairs of lashing rings. Loading height approx. 900 mm. -- Typographical errors, mistakes and alterations reserved, sample images -- More data at: !, More Details: !
Fpedpfszb Dmcox Aqtsh
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalPT 30 3 Achs Tieflader 9,20 m Ladefläche
Ara
Durum: ikinci el, boş ağırlık: 7.340 kg, azami yük ağırlığı: 22.660 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2012, yükleme alanı uzunluğu: 9.200 mm, süspansiyon: çelik, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Yükleme alanı uzunluğu yaklaşık 9.200 mm, yükseklik yaklaşık 900 mm, 16 adet bağlama halkası, araç sipariş üzerine satılmaktadır, baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler. Daha fazla bilgi için: !, More Details: !
Fsdpfezb Dmpox Aqtoph
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal etütar 14,4 tieflader, led, runduml."
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

































































































































































































































































































































