Kullanılmış Max Trailer Type 100 satın al (37.561)

Durumu: yeni, azami yük ağırlığı: 39.600 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, toplam yükseklik: 860 mm, MAX Trailer Type 100 NEW – Extendable | 39 t Payload | 3 Axles | from €66,900 New vehicle – individually configurable to suit your operational requirements. High payload capacity with robust design for maximum efficiency. ----Highlights: • Approx. 39,600 kg payload • Loading platform: 8,600 mm + extendable by 5,400 mm • Ramp load capacity up to 40,000 kg • BPW axles with air suspension • WABCO EBS braking system ----Technical Data: • Gross weight: 49,500 kg • Unladen weight approx.: 9,866 kg • Loading height at max. load: approx. 860 mm • Overall width: 2,540 mm • Max. speed: 80 km/h ----Standard Equipment: • Extendable loading area with robust hardwood floor • Galvanised steel ramps with hydraulic lifting system • High-strength steel construction with long-lasting corrosion protection • LED lighting system • JOST landing legs with 2-speed gearbox • Tyre pressure monitoring system (TPMS) ----Included Options: • Spare wheel with holder • Galvanised front wall (approx. 400 mm) • Electro-hydraulic unit mounted underneath the loading platform • Extendable warning signs with LED Iisdpsypa Npsfx Ag Nsa • Reflective tape in accordance with EU regulations • Rear beacon mounting bracket • Ramp control valves, right side Further equipment and customisation available at any time – we configure your trailer precisely according to your requirements. Sample photo. Equipment may vary depending on configuration.

Durumu: iyi (kullanılmış), dingil konfigürasyonu: 3 dingil, ilk tescil: 12/2017, toplam uzunluk: 13.500 mm, toplam genişlik: 2.530 mm, toplam yükseklik: 3.400 mm, süspansiyon: hava, lastik boyutu: 235/75R17.5, Üretim yılı: 2017, Donanım: hidrolik arka platform, Aks konfigürasyonu Lastik ölçüsü: 235/75R17.5 Aks markası: SAF Süspansiyon: Havalı süspansiyon Arka aks 1: Çift lastik; Kaldırılabilir aks; Maks. aks yükü: 10.500 kg; Sol iç lastik diş derinliği: %70; Sol dış lastik diş derinliği: %70; Sağ iç lastik diş derinliği: %70; Sağ dış lastik diş derinliği: %70 Arka aks 2: Çift lastik; Maks. aks yükü: 10.500 kg; Sol iç lastik diş derinliği: %40; Sol dış lastik diş derinliği: %40; Sağ iç lastik diş derinliği: %40; Sağ dış lastik diş derinliği: %40 Arka aks 3: Çift lastik; Maks. aks yükü: 10.500 kg; Yönlendirilebilir; Sol iç lastik diş derinliği: %40; Sol dış lastik diş derinliği: %40; Sağ iç lastik diş derinliği: %40; Sağ dış lastik diş derinliği: %40 Iiodpfeyzx Dkex Ag Nja Ağırlıklar Boş ağırlık: 10.990 kg Yükleme kapasitesi: 38.510 kg Azami toplam ağırlık: 49.500 kg Durum Teknik durum: İyi Görsel durum: İyi

Durumu: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, toplam yükseklik: 1.250 mm, Donanım: ABS, MAX Trailer Typ 210 NEW | Hydraulic Steering – Extendable | 36t Payload | 3 Axles | from €76,900,-- New vehicle – individually configurable for your specific application. High payload thanks to robust design and maximum cost efficiency. ----Highlights: • Extendable loading platform with pneumatic locking • Numerous high-strength lashing points for optimum cargo securing • Hydro-mechanically forced-steered BPW axles with disc brakes • Air suspension with lifting and lowering function • WABCO EBS brake system in accordance with EU regulations Iodpfxjypaz Sj Ag Neia • Mechanical JOST landing legs with two-speed gearbox • LED lighting system • Tyre pressure monitoring system (TPMS) ----Construction & Durability • High-strength fine-grained steel construction • Metallized chassis with premium corrosion protection • Multi-layer paintwork with additional cavity sealing • Durable hardwood flooring in sturdy omega profiles ----Included Options • Convenient electronic forced steering via cable remote control • Electro-hydraulic power unit • Galvanized front wall (approx. 1,200 mm) • EN 12642-XL body • 10 pairs of stanchion pockets for flexible load securing • Spare wheel holder under the platform • Beacon holder • Reflective tape & European reflector boards • Air couplings at the front ----Further equipment and individual adaptations available at any time – we will configure your vehicle precisely according to your requirements. Sample photo. Equipment may vary depending on configuration.

Durumu: yeni, azami yük ağırlığı: 34.500 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, toplam yükseklik: 350 mm, Donanım: ABS, MAX Trailer Type 510 NEW | Hydraulic Pendle Axle – Extendable | 34t Payload | 2 Axles | from €136,900 New vehicle – individually configurable to suit your application. High payload with robust construction and maximum cost-effectiveness. --Technical Highlights • Hydraulically liftable and lowerable gooseneck with approx. 23,000 kg kingpin load • SUPER LOW low bed, extendable with approx. 40 mm hardwood floor • Hydraulically forced-steered pendle axles with axle compensation • Convenient rear-steering control via wired remote • Heavy-duty lashing points for professional cargo securing • Full-length excavator trough for versatile transport tasks --Chassis & Safety • WABCO EBS braking system in accordance with EU regulations • Tire Pressure Monitoring System (TPMS) • Tires: 245/70 R17.5 • LED lighting system --Construction & Durability • High-strength fine-grained steel construction • Metallized chassis with premium corrosion protection • Multi-layer paint finish for long service life • Cavity sealing with special wax --Included Options • Galvanized front panel + spare wheel • Electro-hydraulic power pack • Prepared for 20'/40' container transport • Load gauge, incl. load diagram • BEKAMAX centralized lubrication system • Extendable warning boards with LED • Beacon mounting bracket --Further equipment options and individual customizations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Actual equipment may vary depending on configuration. Iisdpoypa Ifjfx Ag Nsa

Durumu: yeni, azami yük ağırlığı: 39.000 kg, toplam ağırlık: 50.100 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, toplam yükseklik: 860 mm, Donanım: ABS, MAX Trailer Type 110 NEW | Hydraulic Steering - Extendable | 39t Payload | 3 Axles | from €97,400 New vehicle – individually configurable to suit your specific application. High payload with robust design and maximum efficiency. ----Highlights: • Extendable loading platform with durable 48 mm hardwood floor • Galvanised steel ramps with hydraulic lifting system (up to 40,000 kg load capacity) • Hydro-mechanically forced-steered BPW axles with air suspension • Heavy-duty lashing points for professional load securing • WABCO EBS braking system in accordance with EU regulations • LED lighting system • Mechanical JOST landing legs with 2-speed gearbox • Tyre pressure monitoring system (TPMS) ----Body & Construction • High-strength fine-grain steel construction • Metallised vehicle chassis for optimal corrosion protection • Multi-layer paint structure with additional cavity sealing • Checker plate covering over axles for increased durability (Very important for trust.) ----Included Options • Galvanised front wall (approx. 400 mm) • Electro-hydraulic power unit • Rear axle steering, easily operated via cable remote control • Spare wheel with holder • Galvanised folding supports • Telescopic warning signs with LED • Beacon holder • Reflector tape according to EU regulations Iodpfx Aeypa Rgjg Nsia ----Additional features and customisations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Durumu: yeni, azami yük ağırlığı: 37.500 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, toplam yükseklik: 1.250 mm, Donanım: ABS, MAX Trailer Type 200 NEW | Extendable | 37t Payload | 3 Axles | from €57,000 New vehicle – configurable individually to suit your application. High payload with robust construction and maximum cost efficiency. ----Highlights: • Extendable loading platform with pneumatic locking • Numerous heavy-duty lashing points for optimal cargo securing • BPW air-suspended axles with disc brakes and raise/lower function • Self-steering axles with electro-magnetic reverse lock • WABCO EBS brake system complying with EU regulations • Sturdy steel frame with high-quality corrosion protection • LED lighting system • Mechanical JOST landing legs with 2-speed gearbox • Tire Pressure Monitoring System (TPMS) ----Construction & Bodywork • High-strength fine-grain steel construction for long service life • Metallized chassis with additional cavity sealing • Multi-layer paint finish for optimal protection Iiedpfxoypazxo Ag Nja • Durable wooden flooring in stable omega profiles ----Included Options • Galvanized front wall (approx. 1,200 mm) • Spare wheel carrier under the loading platform • 10 pairs of stake pockets for flexible cargo securing • EN 12642-XL bodywork • Reflective tape & European reflector plates • Holders for warning signs incl. socket • Beacon brackets • Air couplings at the front ----Additional equipment and individual customizations available at any time – we configure your trailer precisely to your requirements. Sample photo. Equipment may vary depending on configuration.

Durumu: yeni, azami yük ağırlığı: 40.320 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Equipment excerpt. Full equipment details available upon request. Gooseneck: * Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick. Loading area with 5 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring, approx. 48 mm thick, with checker plate surface above the axles Landing legs: JOST mechanical landing legs with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t) Tyres: * Tyres 205/65 R17.5 - brand of our choice TPMS: * TPMS tyre pressure monitoring system pursuant to ECE R 141 Axles: * BPW axles, two rigid axles, two steering axles * Air suspension with lifting/lowering feature * Drum brakes * Self-tracking steering axles with electro-magnetic reverse lock, activated via reverse gear or manually Brake system: * WABCO braking system according to EU regulations with EBS-E (4S3M) Electrical system: * Electrical system according to EU standards, 24 volt LED lighting by ASPÖCK-NORDIK (ASS3) * All LED side marker lamps flash synchronously with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731, 15-pin ISO-12098 Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimum corrosion protection * Trailer color RAL 3002 Carmine Red * Wheels Silver Grey * Tarpaulin RAL 9006 (brilliant direct) Options included: * One mounting bracket each for warning signs on the left and right at the gooseneck and rear, including socket * 2-inch king pin * Galvanized steel bulkhead * Yellow-red air couplings at the galvanized front connection strip * 4 wheel chocks with holder mounted on the bulkhead Iedpfey Aug Djx Ag Njia * 3-level wooden boards * Galvanized folding supports under the loading area chamfer * Mount for beacon at the rear of the trailer * Height-adjustable tarpaulin structure – approx. 3,960 mm * Galvanized front bulkhead with a tensioning mechanism for the sliding curtains. Height-adjustable by approx. 400 mm * EDSCHA roof, forward-slidable on ALU roof bearer profiles (bolted to front and rear wall) * 3 pairs of sliding stanchions in the loading area * The body can be hydraulically widened at the rear to the left and right by approx. 750 mm * Sliding roof with fold-up portal beam * Sliding tarpaulin with 700 mm surplus in length, with tension straps approx. every 600 mm. Height to top edge of body approx. 3,960 mm (loaded) * Driving with the sliding roof open is not permitted and will cause damage to the tarpaulin * Rear of the body with closed anodized ALU swing doors * Hook-in rail for ALU drive-on ramps at the rear of the vehicle * Control valves for hydraulic body widening mounted on the right trailer side * White reflective tape in accordance with EU regulations, red tape at the rear * Electro-hydraulic unit mounted at rear under loading area * Mud flaps at the rear of the trailer * European reflective warning signs (red-yellow) at the rear of the tr

Durumu: yeni, azami yük ağırlığı: 58.860 kg, toplam ağırlık: 73.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Our complete inventory of vehicles, including units available for immediate or short-term delivery, can be found on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners approx. 45°, rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Extendable loading platform: * Loading platform in extendable design with rear bevel approx. 500 mm x 8° * 8 pairs of foldable lashing rings (LC 10,000 daN) * 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Two-section steel ramps: * One pair of galvanized two-section steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber covering * Ramp with hydraulically folding ramp sections * Hydraulic lifting unit, hydraulically adjustable * Maximum load per pair: 50,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not have to be included in the overall vehicle length of 16,500 mm when in driving position Axles: * BPW axles and suspension, 1st axle steered (leading), 2nd and 3rd axles fixed, 4th and 5th axles trailing steer, air suspension with lift/lower function, drum brakes * Trailing steering axles with electro-magnetic reverse lock, activated automatically when reversing or manually * Technical axle load: 12,000 kg each Tyres: * Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: Iiodpfx Agey Augwe Nea * Tyre Pressure Monitoring System (TPMS) compliant with ECE R 141. Data transfer to the truck unit is via the standardized EBS interface in accordance with ISO 11992. For correct display, the truck unit must be able to receive and display this data. Landing legs: * JOST mechanical landing legs with two-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake system: * Wabco braking system in accordance with EU regulations with EBS-E (4S3M), without connector lines to the tractor unit Steel construction: * Steel structure made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicators * ASPÖCK-UNIBOX at the front connection panel with sockets 24N, 24S & 15-pin connectors as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel construction automatically shot blasted after welding using a wheel blast system * Second blasting using corundum for optimal adhesion of paint system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection * Final coating using 2 layers of 2K topcoat, single-color in RAL 3002 carmine red, as per RAL system 841GL * Rear section metallized and painted in RAL 9010 pure white Including the following additional equipment: * 2-inch king pin * One galvanized steel front wall approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings at the galvanized front connector panel * A bracket for a rotating beacon at the rear of the trailer * Galvanized supports under the platform’s rear bevel * Super Grip rubber ma

Durumu: yeni, azami yük ağırlığı: 36.020 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and soon-to-be available models, on our website. Excerpt from the equipment. Full specification available upon request. Gooseneck: * Gooseneck with rear bevel, approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Load area: * Load area with rear bevel, approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the load area (LC 10,000 daN) * Hardwood flooring, approx. 48 mm thick; over the axles, chequer plate covering Two-part steel ramps: * 1 pair of galvanized, two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating (C40/5). Point load approx. 2.8 t on a 20 x 20 cm area * Ramps with hydraulically foldable sections and hydraulic lifting device * Maximum load per pair: 30,000 kg Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 trailing steer axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Tyres: * Tyres: 235/75 R 17.5 3PMSF – make at our discretion TPMS: * Tyre Pressure Monitoring System (TPMS) according to ECE R 141 Braking system: * WABCO braking system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * High-strength fine-grained steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) Iedjy Auhuopfx Ag Noia * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Coating: * HRM metallization of the entire chassis using ZINACOR 850 (85% zinc / 15% aluminium) for optimal corrosion protection * Final coating with 2 layers of 2-component topcoat, single-colour, RAL 3002 carmine red, according to RAL System 841GL * Rear section metallized and painted in RAL 9010 (pure white) * Wheel rims in silver Incl. accessories: * One bracket each for warning signs (left/right) at gooseneck and rear, incl. socket * 1 spare wheel carrier under the load area on the right * 2-inch kingpin * One galvanized steel front wall * At the galvanized front connection rail: yellow-red air couplings * 4 wheel chocks with holders at the front wall * 3-tier wooden planks * Galvanized folding supports under the rear bevel * Holder for beacon at the rear of the trailer * Height-adjustable curtain structure – approx. 3,960 mm * Galvanized front wall with locking mechanism for sliding curtains, height adjustable by approx. 400 mm * EDSCHA brand roof, forward-slidable on aluminium roof profile (bolted to front and rear walls) * 3 pairs of movable stanchions in the load area * Body hydraulically expandable to left/right at rear by approx. 750 mm * Sliding roof with high-lift portal carrier * Sliding curtain with approx. 700 mm extra length, tensioning straps spaced approx. 600 mm apart. Height O

Durumu: yeni, azami yük ağırlığı: 37.980 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details upon request. Gooseneck: * Gooseneck with front beveled corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Isdpfx Agsy Aufmj Neia Load platform in extendable design: * Extendable load platform with rear bevel approx. 1,000 mm x 8° * 6 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tie-down straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF – make of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardised EBS interface according to ISO 11992. For correct display, the towing vehicle must be capable of transmitting and displaying this data. Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, can be activated via reverse gear and manually * Air suspension with raise/lower valve * Axle tool Brake system: * Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: * Steel construction of high-strength fine-grained steels * Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa) Painting: * Complete steel structure automatically blast-cleaned after welding with shot-blasting system * Secondary blasting with corundum for optimum coating adhesion * Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 carmine red, according to RAL system 841GL * Wheel rims in silver grey * Rear section metalized and painted in RAL 9010 (pure white) * Paint system tested in salt spray fog test according to ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO 1185 24S ISO 3731 15-pin ISO 12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection strip at the front * 4 wheel chocks with holder at the front wall * Provision at the rear of the gooseneck for ALU loading ramps * Galvanized folding supports under the rear bevel of the loading area * On the gooseneck and rear panel left and right, each with a holder for warning boards including socket * Load manometer to determine axle loads including load diagram * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable (superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the beveled gooseneck * 3 pairs WADER C

Durumu: yeni, azami yük ağırlığı: 47.300 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment features. Full equipment details available on request. Gooseneck: * Gooseneck with beveled front corners (approx. 45°) and rear bevel of approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Extendable loading platform with rear bevel of approx. 1,000 mm x 8° * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering over the axles Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24t lift capacity (50t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF, brand of our choice Axles: * BPW axles; two fixed, two self-steering, air suspension, with drum brakes and lift/lower function * The self-steering axles have an electro-magnetic reversing lock, activated via reverse gear or manually * Axle tools Brake System: * WABCO braking system according to EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Steel Structure: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connecting rail with 24N, 24S & 15-pin sockets according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098) Paintwork: * Premium, long-lasting corrosion protection for the shot-blasted welded frame, provided by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) top coat, single-color in RAL 3002 Carmine Red * Rear section metallized and painted RAL 9010 (Pure White) * Rims in silver Ijdpfsyvnfgox Ag Nsia Accessories: * Spare wheel holder in front of the front wall (without spare wheel) * 2" king pin * Galvanized steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanized front connection rail * Recess at the rear of the gooseneck for ALU loading ramps * Galvanized folding supports under rear bevel of platform * Bracket for warning beacon at trailer rear * Brackets on both sides of gooseneck and rear for warning panels incl. socket * TPMS tyre pressure monitoring system according to ECE R 141 * Removable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm (L x H); galvanized rear posts removable (superstructure length approx. 2,560 mm) * Galvanized toolbox integrated in the beveled gooseneck * 3 pairs of WADER container pockets in the platform for one 20' (30') or one 40' container * Adjustable mounting rails for ALU loading ramps at the vehicle rear * 6 pairs of stake pockets for removable stakes approx. 100 x 50 mm in the outer frame of the platform * Galvanized outriggers extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control depending on current axle load and load condition * 2 LED reversing lights mounted on rear panel * 2 pairs of ferry-

Durumu: yeni, toplam ağırlık: 58.000 kg, Üretim yılı: 2026, Low-bed semi-trailer MAX100 4 A 8.60 U Technical Data Speed: 80 km/h Gross Vehicle Weight: 60,800 kg Fifth Wheel Load: 18,000 kg Axle Load: 42,800 kg Tare Weight: Payload: Gooseneck Length: 3,850 mm Loaded Fifth Wheel Height: 1,250 mm Loading Platform Length: 8,600 mm Iodpfog Sk T Dsx Ag Noia Extendable by: 5,400 mm Axle Spacing: 1,360 mm Steering Radius (rear): 2,300 mm Loading Height at Max. Load: 860 mm Overall Width: 2,540 mm Suspension Stroke: -55/+145 mm Technical Description Gooseneck With 45° chamfered front corners and rear chamfer approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) 30 mm thick hardwood floor Extendable loading platform With rear bevel approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings (LC 5,000 daN) 3 pairs of outward-folding lashing rings (LC 10,000 daN) 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000) Approx. 48 mm thick hardwood flooring, chequer plate above the axles Ramps Two-part steel ramps One pair of galvanized, two-part steel ramps, approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm hardwood flooring Ramp sections hydraulically lifted and folded in, hydraulic lift and hydraulically adjustable position Max. load per pair: 40,000 kg Tyres 235/75 R 17.5 Brake System compliant with EU regulations, with EBS-E (4S3M) Without connection lines to the tractor unit Paintwork First-class, long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by 2-component zinc dust primer High-quality 2-component (2K) top coat, single colour, in RAL shades of choice Rear section metallized and painted in RAL 9010 (Pure White) Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24t Lifting capacity (50t test load) Steel construction made from high-strength fine-grained steels. Steel Qualities: Steel construction made from high-strength fine-grained steel S355J2+N/S355MC (Yield Strength 355MPa) S690QL/S700MC (Yield Strength 690MPa) Electrical System according to EU regulations, lighting: LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets Connection as per ISO. 24N IS0-1185 24S IS0-3731 15-pin IS0-12098 Accessories included: One galvanized steel headboard approx. 400 mm high 2" king pin 4 wheel chocks with holders on the headboard One holder for revolving beacon at rear of trailer SAF axles, two rigid axles, one self-steering axle, air suspension, with drum brakes, with raise/lower function The self-steering axle with electromagnetic reverse lock, can be activated by reverse gear or manually Axle tools included Support for ALU approach ramps at the rear of the gooseneck Galvanized folding supports under the loading platform chamfer Mechanical safety lock for the loading platform extension One spare wheel with holder in front of the headboard Yellow reflective tape as per EU regulations on sides, extension, and rear of trailer At the front galvanized connector strip, yellow-red air couplings On gooseneck and rear apron left and right, mounts for warning plates, including sockets A mudflap at the rear of the trailer Manual and description On the gooseneck: Plug-in aluminium sideboards and rear wall, approx. 2,440 x 400 mm (LxH) Rear galvanized stanchions are removable Body length approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container locks in the loading platform for a 20', 30', or 40' container (±30 kg) 6 pairs of pockets for plug-in stanchions

Durumu: kullanılmış, azami yük ağırlığı: 37.950 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2024, bir sonraki muayene (TÜV): 02/2026, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available on request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading area: * Telescopic loading area with rear slope approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm and widening in the lower section * Between 1st and 2nd axle a pair of fixed wheel recesses with covers, approx. 1,610 x 700 x 400 mm (L x W x D) * Recess in the sloped area and extending into the loading area for excavator arm reception, approx. 2,900 x 750 x 210/290 mm (L x W x H) * 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) * Incl. 3-piece removable galvanized covers over the wheel recess - max. point load approx. 3.5 t / each Axles: * BPW axles and suspension, 2 rigid axles, 3rd axle self-steering * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve * Axle tool kit Tyres: * 235/75 R 17.5 3PMSF tyres Iiedpfx Agsyc Axys Noa Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Braking system: * Braking system in accordance with EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel construction: * High-strength fine-grained steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc-rich primer * High-quality single-tone 2-component (2K) finishing coat in RAL 3002 carmine red * Rear section metalized and painted in RAL 9010 pure white Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * Spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection rail at the front * 4 wheel chocks with holders on the front wall * Mounting at the rear of the gooseneck for aluminium loading ramps * Galvanized foldable supports under the rear slope of the loading area * A bracket for a rotating beacon at the rear of the trailer * Yellow reflector tape according to EU regulations on the sides, extension and rear of the trailer * Bracket on the gooseneck and rear plate, left and right, for warning signs incl. socket * One mud flap at the rear of the trailer * Manual and documentation on USB stick * On the warning signs, a bracket for rotating beacon * European reflector plates (red-yellow) at the rear of the trailer * 80 km/h speed decals on the rear and both sides * Load manometer for axle load determination including load diagram * On the gooseneck, plug-in aluminium side panels and rear wall, approx. 2,440 x 400 mm (L x H) * Rear galvanized drop-in stakes are removable (superstructure length approx. 2,560 mm) * A tool ...

Durumu: yeni, azami yük ağırlığı: 39.670 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Summary of equipment. Full equipment details available upon request. Gooseneck: * Gooseneck with approx. 30 mm thick hardwood flooring * Gooseneck at the rear, straight design * 3 pairs of lashing rings (LC 5,000 daN) Loading Area: * Extendable loading area * 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN) * 1 pair of lying lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, diamond plate over the axles Landing Legs: JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, two fixed and two self-steering axles * Air suspension with lifting/lowering function * Self-steering axles with electromagnetic reversing lock, can be activated via reverse gear or manually * Drum brakes * Axle tools Tyres: * 205/65 R 17.5 * Brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to the tractor via standardised EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to transmit and display this data Brake System: * Brake system in compliance with EU regulations with EBS-E (4S3M), without connector lines to the tractor unit Iedpoxarlvjfx Ag Nsia Steel Construction: * Steel structure made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: * Entire steel structure automatically shot-blasted after welding * Secondary blast treatment with corundum for optimal coating adhesion * HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection * Final paint finish with 2 coats of 2K topcoat, single colour in RAL 3002 carmine red, according to RAL 841GL * Rims in silver * Rear section metallised and painted in RAL 9010 (pure white) * Metallic paints not possible * Paint system tested in salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Electrical System: * Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights flash with the indicators * ASPÖCK-UNIBOX on the front connection rail with 24N, 24S & 15-pin sockets; connections according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098) Accessories included: * 2-inch king pin * One spare wheel holder in front of the bulkhead * Yellow-red air couplings on the galvanised front connection rail * Galvanised drop supports under the ramped section of the loading area * One galvanised steel bulkhead (EN12642-XL), approx. 1,600 mm high * Removable ALU side boards and rear gate approx. 2,440 x 400 mm (L x H) on the gooseneck * Rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) * Support block with 1 pair of WADER container pockets; fifth wheel load approx. 20,000 kg * 7 pairs of WADER container pockets for 1x 20' container in the loading area * 1x 40' container in the loading area, 1x 40' container above the gooseneck, 2x 20' container * 7 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area * One galvanised crosswise holder under...

Durumu: yeni, azami yük ağırlığı: 36.360 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front chamfered corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm as well as lower area widenings * Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) – max. point load 5 t each * Recess in the chamfer and protruding into the loading platform to accommodate an excavator bucket handle (approx. 2,900 x 750 x 210/290 mm – L x W x H) * 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 2 pairs of lashing rings in the excavator bucket recess (LC 5,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulically foldable ramp sections and hydraulic lifting gear, hydraulically adjustable * Maximum load per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lockout via reverse gear and manual activation * Air suspension with lift and lower valve Tyres: * Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * TPMS Tyre Pressure Monitoring System according to ECE R 141 Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure optimal corrosion protection * Final coating with two layers of 2K topcoat, single-color in RAL 3002 Carmine Red, according to RAL System 841GL * Rims in silver-grey Incl. the following additional features: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * Electro-hydraulic unit at the rear, under the loading platform * On the gooseneck, plug-in aluminum side and rear panels, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Body length approx. 2,560 mm) * One galvanized toolbox, integrated into the chamfered gooseneck * 2 pairs of WADER container pockets in the loading platform for a 20' or 30' container Isdpfx Aeyhkq Usg Noia * 3 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform * 3 pairs of additional removable, galvanized covers over the wheel recesses – max. point load 3.5 t each * One removable galvanized intermediate table with 1 pair of WADER container pockets * 1 additional hook-on intermediate table, ap

Durumu: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment details. Complete specification available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45°, with rear bevel approx. 750 mm x 10° * 3 pairs lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading platform: * Loading area aft of the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs outward-folding lashing rings (LC 5,000 daN) * 2 pairs outward-folding lashing rings (LC 10,000 daN) * 1 pair inward-folding lashing rings at the central beam front (LC 10,000 daN) * Cutouts in the external frame of the loading area for securing strap hooks (LC 2,000 daN) * Grating floor covering C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), checker plate floor covering above the axles Two-piece steel ramps: * One pair galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections * Hydraulic lifting unit, hydraulically adjustable * Maximum load capacity per pair: approx. 40,000 kg Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steered axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * Tire Pressure Monitoring System (TPMS) according to ECE R 141 Paintwork: * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K top coat, single color in RAL 3002 Carmine Red in accordance with RAL System 841GL * Wheels in silver grey Accessories included: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating floor covering in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating floor covering in the loading platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) Iodpfxoyhkrrj Ag Noia * Electro-hydraulic unit at the rear beneath the loading area * On the gooseneck – plug-in aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stake pockets are removable (body length approx. 2,560 mm) * One electric cable winch with remote control, approx. 5,400 kg pulling force, incl. wire rope approx. 9.5 mm thick, approx. 24 m long, with guide roller * Bolted approx. 5t ring for winch cable insertion on the gooseneck without deflection roller * One galvanized toolbox, integrated in the gooseneck bevel with an opening for a winch * Grating floor covering on the gooseneck C30/3 (point load approx. 2t over an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the external frame of the loading area * Lift axle on the front axle, controlled via TEBS E in accordance with current axle load and loading condition * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs at the r

Durumu: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Loading Platform: * Platform behind the gooseneck hydraulically liftable and lowerable, approx. 2,800 mm long, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of fold-in lashing rings on the central beam at the front (LC 10,000 daN) Iodsyhkqzspfx Ag Njia * Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding and unfolding ramp sections. Hydraulic lifting, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Gear: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Brake System: * WABCO braking system in accordance with EU regulations, with EBS-E (2S2M) Tires: * Tires 235/75 R 17.5 3PMSF – brand at our discretion TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) ensuring optimal corrosion protection * Final paint with 2 layers of 2K top coat, single color in RAL 3002 carmine red, in accordance with RAL System 841GL * Wheels in silver-gray Accessories included: * 2-inch kingpin * Galvanized steel front wall approx. 400 mm high * Grating surface in the gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating surface in the loading platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Painted sand layer as anti-slip on the checker plates above the kingpin and platform * Electro-hydraulic unit at rear beneath the loading platform * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H). The rear galvanized stakes are removable. (Body length approx. 2,560 mm) * Electric cable winch with radio remote control, lifting force approx. 5,400 kg, incl. approx. 9.5 mm thick wire cable, approx. 24 m long, with cable guiding roller * Bolted approx. 5 t ring for redirecting the winch cable on the gooseneck without guide pulley * One galvanized toolbox integrated in the chamfered gooseneck with an opening for a cable winch * Grating surface on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading platform * Lift axle on the front axle, controlled via TEBS E based on current axle load and loading status * 7 pairs inst...

Durumu: kullanılmış, azami yük ağırlığı: 39.780 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2023, bir sonraki muayene (TÜV): 01/2027, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire stock of vehicles, including those available for immediate or short-term delivery, on our website. Extract from the equipment list. Complete specification upon request. Gooseneck: * Gooseneck with approx. 45° chamfered front corners and a rear chamfer of approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading bed Iiodpfx Asx Uvlrog Nea * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading bed (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: * Tyre size 205/65 R 17.5, twin-mounted Axles: * BPW axles, two fixed axles, two air-suspended self-steering axles, with drum brakes and lift/lower function * The self-steering axles have an electromagnetically controlled reverse lock, operable via reverse gear or manually Brake system: * Brake system compliant with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Steel structure: * High-strength fine-grained steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer * High-quality single-colour 2-component (2K) top coat in RAL 3002 Carmine Red * Rear section metallised and painted in RAL 9010 Pure White * Rims in silver Electrical system: * Electrical system according to EU regulations Lighting: * 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with sockets 24N, 24S & 15-pin connection per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included accessories: * 2-inch kingpin * Galvanised steel front wall approx. 400 mm high * Spare wheel carrier in front of the front wall * Yellow-red air couplings mounted on the galvanised connection rail at the front * 4 wheel chocks with holders on the front wall * Mountings at the rear of the gooseneck for aluminium loading ramps * Galvanised folding supports under the rear slope of the loading area * Bracket for a beacon at the rear of the trailer * Yellow reflective tape as per EU regulations at sides, extension, and rear * Mounts for warning plates, left and right on the gooseneck and rear panel, including socket * Mudflap at the rear of the trailer * Manual and documentation on USB stick * European reflective plates (Red-Yellow) at the rear * 80 km/h speed stickers at the rear and both sides * Audible reverse warning signal * Load pressure gauge for axle load determination, including load chart

Durumu: yeni, azami yük ağırlığı: 37.820 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately or short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: Gooseneck with front corners beveled at approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load platform: * 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm and widenings at the lower section * Between the 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) - max. point load approx. 5 t/each * Recess in the beveled area and extending into the load platform for accommodating the excavator dipper stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of horizontally mounted lashing rings at the front of the loading area (LC 10,000 daN) * 5 pairs of outward foldable lashing rings (LC 5,000 daN) * 3 pairs of outward foldable lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator boom recess (LC 5,000 daN) * Cut-outs in the outer frame of the load platform for attaching tensioning straps (LC 2,000 daN) One-piece steel ramps: * 1 pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering * Ramp with hydraulic lifting system, hydraulically adjustable * Maximum load per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not have to be included in the vehicle length when in driving position Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 axles rigid, 1 axle self-steering * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, can be engaged via reverse gear and manually * Air suspension with lift and lower valve * Axle tools Iijdpfx Agow Tpqws Nja Tyres: * Tyres 235/75 R 17.5 3PMSF – Brand of our choice * TPMS tyre pressure monitoring system as per ECE R 141. Data transfer to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of both receiving and displaying this data Brake system: * WABCO brake system in compliance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system as per EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Coating: * Complete steel structure automatically shot-blasted with turbine system after welding * Second sandblasting with corundum for optimum adhesion of the coating system * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection * Final coating with two layers of 2K topcoat, plain color RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver * Rear section metalliz

Durumu: yeni, azami yük ağırlığı: 38.140 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Partial equipment list. Full specifications available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and a rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - Between the 1st and 2nd axle, one pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) Ijdpfxow Tpq De Ag Njia - Incl. 3-piece removable, galvanized wheel recess covers (approx. 670 mm wide - max. point load 5 t each) - 1 pair of recessed lashing rings at the front of the loading deck (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: Tyres 235/75 R17.5 3PMSF, brand at our discretion - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to the truck via the standardised EBS interface per ISO 11992 - For correct display, the truck must be capable of transmitting and displaying this data. Axles: - BPW axles and suspension, 2 fixed axles, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activatable via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Brake system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel structure: Steel frame made of high-strength fine-grain steels. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure is automatically blasted after welding using a turbine blasting system - Second blasting with corundum for optimal coating adhesion - HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure top corrosion protection - Final painting with two coats of 2K paint, solid colour in RAL 3002 Carmine Red, rear section metallised and painted in RAL 9010 Pure White - No metallic paint possible - Paint finish tested in salt spray test per ISO 9227-NSS - Sealing of cavities with special wax Including the following accessories: - Mounts for warning signs on both sides at the gooseneck and at the rear, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch kingpin - Galvanized steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - Galvanized folding supports under the loading area bevel - Hardwood impact protection on the rear wall from gooseneck to loading platform - 1 pair of recessed lashing rings along the central frame at the rear on the bevel (LC 10,000 daN) - Aluminium side walls and tailboard on the gooseneck

Durumu: yeni, azami yük ağırlığı: 39.720 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck * With approx. 45° chamfered front corners and rear bevel measuring approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading platform Loading platform in extendable design * 5 pairs of fold-out lashing rings on the sides (LC 5,000 daN) * 3 pairs of fold-out lashing rings on the sides (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles fitted with checker plate Landing legs * JOST (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles * BPW axles, two rigid, two self-steering trailing axles, with drum brakes * Air suspension with lifting/lowering function * Self-steering axle with electromagnetically operated reversing lock, activated via reverse gear or manually * Tyres: 205/65 R 17.5 Brake system * Wabco braking system in accordance with EU regulations, equipped with EBS-E (4S3M), without connection lines to the tractor unit Steel construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) single-color finishing coat in RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Wheel rims in silver Iedpfx Agsu Sd U Uj Njia Included accessories * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection bar at the front * 4 wheel chocks with holder set on the front wall * Mount at the rear of the gooseneck for aluminum loading ramps * Galvanized folding supports under the loading platform bevel * Holder for beacon light at the rear of the trailer * Yellow reflector tape on the sides, extension and rear of the trailer, in accordance with EU regulations * On both sides of the gooseneck and rear panel, holder for warning plates including socket * TPMS tire pressure monitoring system in accordance with ECE R 141. Data transmission to the truck via the standardized EBS interface (ISO 11992); for correct display, the truck must be able to receive and display this data * On the gooseneck: removable aluminum side and rear panels, approx. 2,440 x 400 mm (L x H); rear galvanized stanchions are removable. (Body length approx. 2,560 mm) * Galvanized toolbox integrated into the beveled gooseneck * 6 pairs of WADER container pockets in the loading platform for accommodating 1 x 20' container, 2 x 20' containers, or 1 x 40' container * Sliding mounting rails for aluminum loading ramps at the rear of the vehicle * 7 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Galvanized crosswise holder under the loading platform * Galvanized extendable wideners, extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control, depending on the current axle load and load condition * 5 pairs of rec

Durumu: kullanılmış, boş ağırlık: 11.950 kg, azami yük ağırlığı: 37.550 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2025, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: gri, Üretim yılı: 2025, Donanım: ABS, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood floor Two-piece steel ramps: - 1 pair of galvanized two-piece steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections, hydraulic lifting mechanism - Maximum load per pair: 30,000 kg Loading area: - Loading area with rear bevel approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings - 3 pairs of fold-out lashing rings - 1 pair of recessed lashing rings at the front of the loading area - Approx. 48 mm thick hardwood floor, checker plate covering above the axles Axles and tires: - BPW axles and suspension, two axles fixed, one axle self-steering - Air suspension with lifting/lowering valve - The self-steering axle is equipped with an electromechanical reverse lock, activated via reverse gear or manually - Tires 235/75 R17.5 3PMSF Accessories included: - 1 spare wheel with holder - TPMS tire pressure monitoring system according to ECE R 141 - 2" kingpin - One galvanized steel front wall - Yellow-red air couplings at the galvanized connection strip in the front - 4 wheel chocks with holders Iiodpfey Drdcjx Ag Noa - Recess at the rear of the gooseneck for ALU loading ramps - 3 height-adjustable aluminum planks - Galvanized folding supports under the loading area bevel - Holder for a beacon at the rear of the trailer - Height-adjustable tarpaulin frame (3,960 mm) - Galvanized front wall with tensioning mechanism for the sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof, forward-sliding on ALU roof rail profiles, bolted with front and rear wall - 3 pairs of sliding stanchions in the loading area - The body is hydraulically extendable to the left and right at the rear by approx. 750 mm - Sliding roof with tiltable portal support - Sliding curtain with 700 mm reserve in length, equipped with tension belts spaced approx. 600 mm apart - Height of upper edge of body approx. 3,960 mm - Journeys with open sliding roof are not permitted and will result in damage to the tarpaulin - Cover plates to bridge the gap between ramps and loading area - Electro-hydraulic unit at the rear, beneath the loading area - On the gooseneck and on the ramps, left and right, each with a holder for warning signs, including socket - European reflective signs (red-yellow) at the rear of the trailer - 6 pairs of stanchion pockets for insertable stanchions 100 x 50 mm in the outer frame of the loading area - Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading status - Grating floor covering in the bevel of the loading area C40/4 (point load 3.4 t on an area of 20 x 20 cm) - 1 stainless steel toolbox INOX 565 x 290 x 810 mm, right-hand side in driving direction between the axles - On the checker plates on the gooseneck and loading area, anti-slip sand coating painted on - BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm - Load gauge for determining axle loads, including load chart - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then the defined visible surfaces hot-metalized with ZINACOR 850 (zinc 85% - aluminum 15%)

Durumu: yeni, boş ağırlık: 9.300 kg, azami yük ağırlığı: 30.100 kg, toplam ağırlık: 39.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, Donanım: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable loading area: - Loading area in extendable design with rear bevel approx. 1,000 mm x 8° - 5 pairs of folding lashing rings to the outside (LC 5,000 daN) - 3 pairs of folding lashing rings to the outside (LC 10,000 daN) - 1 pair of flat lashing rings in the front of the loading area (LC 10,000 daN) - Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick; chequer plate flooring over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lift capacity (50t test load) Axles and tires: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tools - TPMS tire pressure monitoring system according to ECE R 141 - Tires 235/75 R17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall approx. 400 mm high - Yellow and red air couplings on the galvanized front connector rail - 2 wheel chocks with holders on the front wall Isdpfxsyxc Eyo Ag Nsia - One spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Rear axle steering operable from front and rear via cable remote control with push buttons, including single-track axle alignment control - European reflector panels (red-yellow) at the trailer rear - White reflective tape according to EU regulations on the sides and extension, rear in red - On the gooseneck and at the rear, left and right, one bracket each for warning signs, including socket - Movable mounting rail for ALU approach ramps at the rear of the vehicle - A bracket for a beacon at the rear of the trailer - Galvanized folding supports under the loading area’s bevel - One mud flap at the rear of the trailer - Operating manual and description on USB stick - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable cover around the pump - Plug-in ALU side walls and tailboard on the gooseneck, approx. 2,440 x 400 mm - The rear, galvanized plug-in stanchions are removable (structure length approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading area for 1x 20ft, 1x 30ft, or 1x 40ft container - 6 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the external frame of the loading area - One INOX toolbox 1,500 x 390 x 810 under the loading area, right side in driving direction - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm each with a position lamp - Beacon bracket on the warning signs - Radio remote control for rear axle steering, in addition to cable control, with indicator lights on the receiver for single-track alignment check - Sand-coated anti-slip layer painted on chequer plates on the gooseneck and loading area - 80 km/h speed stickers on the rear and both sides - Load manometer for determining axle loads, including a load chart

Durumu: mükemmel (kullanılmış), ilk tescil: 05/2013, toplam uzunluk: 123.500 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 900 mm, renk: mavi, Üretim yılı: 2013, Boş ağırlık: 9.100 kg Yük kapasitesi: 48.900 kg yasal toplam ağırlık (zGG): 58.000 kg Teknik durumu: çok iyi Görsel durumu: çok iyi Iodpfeyuphfex Ag Noia 4 x havalı süspansiyonlu dingil 2 x yönlendirilmiş dingil, 1 x kaldırılabilir dingil Dingil başına 10.000 kg Teknik olarak izin verilen toplam ağırlık: 58.000 kg Lastik ebatı: 245/70 R17.5 Yatma alanı: 855 cm + 335 cm kuğu boyun Yükleme alanı genişliği: 255 cm Yükleme alanı yüksekliği: 90 cm Kanca halkaları ve yuvarlak gözler

Durumu: yeni, boş ağırlık: 12.000 kg, azami yük ağırlığı: 54.000 kg, toplam ağırlık: 66.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear tapering approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) Ijdjykpbkspfx Ag Nsia - 30 mm thick hardwood flooring Extendable loading platform: - Extendable loading platform with rear tapering approx. 1,000 mm x 8° - 5 pairs of foldable lashing rings (LC 5,000 daN) - 3 pairs of foldable lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - Cut-outs in the outer frame of the platform for anchoring straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles checker plate Landing gears: - JOST landing gears (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Brake system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel structure made from high-strength fine-grained steel Axles and tires: - BPW axles and suspension, first axle rigid, all other axles hydro-mechanically steered - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - Axle toolbox - TPMS tire pressure monitoring system according to ECE R 141 - Tires 245/70 R 17.5 3PMSF Included accessories: - 2" kingpin - One galvanized steel front wall approx. 400 mm high - At the front galvanized connection strip, yellow-red air couplings - 4 wheel chocks with holders on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic unit - Rear steering, controllable from front and rear via cable remote control (push button), with axle alignment monitoring - European reflective plates (red-yellow) at the rear of the trailer - White reflective tape according to EU regulations on the sides and extension, red at the rear - Bracket for warning signs on left and right of the gooseneck and at the rear, with socket included - Galvanized, extendable side extensions approx. 230 mm per side - Bracket for a revolving beacon at the rear of the trailer - Galvanized drop down supports under the angled part of the loading platform - One mudflap at the rear of the trailer - Manual and description on USB stick - BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 and removable guard around the pump - ALU plug-in sideboards and rear board on the gooseneck approx. 2,440 x 400 mm - Rear, galvanized plug-in stanchions removable (superstructure length approx. 2,560 mm) - One INOX toolbox 1,350x400x400 on the gooseneck - Note: The box covers the oil filler cap - 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft or 1x 45ft container - 7 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm on the outer frame of loading platform - Sliding plug-in rail for ALU drive-on ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area bevel - Lift axle on the front axle with control by TEBS-E in accordance with current axle load and loading condition - Four warning panels, approx. 400 mm extendable, size approx. 423 x 423 mm, equipped with position lamps - Bracket for revolving beacon on the warning panels - Wireless remote for rear steering, in addition to cable remote, with indicator lights on the receiver for axle alignment monitoring - Painted sand coating on the checker plate sections of the gooseneck and platform as anti-slip protection - 80 km/h speed limit sticker at rear and on both sides - Load gauge for determining axle loads, including load diagram