Kullanılmış Meusburger 2-Achs-Jumbo-Tiefbett Mit Planenaufbau satın al (51.082)

Durum: yeni, boş ağırlık: 11.000 kg, azami yük ağırlığı: 27.000 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 235/75 R17.5, renk: gri, işletme ağırlığı: 11.000 kg, Donanım: ABS, Chassis: - Welded steel frame construction with front and rear frame cranking and drop deck without rear bevel - Frame neck + fifth wheel plate 225 mm - Drop deck designed for a point load of 25 t over 5 m - Outer frame closed outward with welded-in lashing rings for securing loads - Interchangeable 2" kingpin - Rear mounting rail for aluminum ramps Axles and Tyres: - BPW low-bed trailer axles, each with a 10 t axle load, air bag diameter 360 mm - Air suspension with lifting and lowering function, stroke 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for two coupling heights +100 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - IVTM tire pressure monitoring system - 9 tires 235/75 R 17.5, tubeless Steering: - 1st and 2nd axle hydraulically forced steered via fifth wheel coupling Floor: - Multi-layer bonded flooring, 27 mm thick, flush with outer frame and longitudinal beams - Underside reinforced with GRP coating - 12 pairs of lashing rings welded into the outer frame (8 pairs RUD 8 t – 6 pairs in the drop deck as well as 1 pair each on the gooseneck and at the beginning of the rear unit – 2 pairs of 4 t lashing rings on both gooseneck and rear unit) - 6 pairs of mushroom-type lashing points in the outer frame in the drop deck - Storage compartment with lid in the front left and right of the drop deck floor Front Wall: - 25 mm aluminum hollow profiles raised to the lower edge of the roof with integrated tarpaulin tensioning system Sliding Tarpaulins: - Sliding curtain both sides with welded-in vertical and horizontal straps (approx. 600 mm spacing) and stainless-steel tension locks - Adjustable curtain straps (over-center) for loading width up to 4,000 mm including curtain extension with press studs and Velcro fastener - Curtain extension in driving direction: 300 mm, in height: 750 mm - Incl. eyelets for loose curtain extension part - 1 pair of vertical curtain pockets approx. 1,000 mm length, positioned in the drop deck at the front cranking - With belt pockets Rear Wall: - Steel rear portal frame with side tarpaulin hook-in device - Aluminum double-wing door, 25 mm thick - Both door wings fully foldable with door retainer - One aluminum double-joint hinge and two recessed grip recesses per door wing Front Corner Posts: - At roof height, bolted at the front end Central Posts: - 3 pairs of continuously adjustable folding stanchions - Stanchions can be moved along the entire length via trolleys - Central stanchions in the drop deck can also be fixed at the rear platform Roof: - EDSCHA sliding roof (galvanized) with crossbeams that can be shifted in both directions (pushed together to the front in the cargo area) Ppodeiu Eu Nspfx Ag Dow - Rear portal cross member can be swiveled away - PVC tarpaulin roof without customs seal - Hand-operated hydraulic lifting roof on both sides, lift 450 mm - Raised roof movable to the front (9x50) and rear (9x50) positions - Including rear curtain extension and curtain skirt - Roof can be cranked out at the very front on the bulkhead by 900 mm each Accessories: - Extendable warning boards (removable front and rear with socket) incl. position lights up to 4,000 mm loading width - Storage for 4 warning boards on the front wall, top right and left inside - 1 aluminum ladder with bracket, 2,500 mm long, mounted on the front wall - 2 rows of self-locking aluminum slats - Sheet metal fenders with mud flaps - 1 night parking sign and 1 ADR panel on the rear wall - Central lub

Durum: yeni, boş ağırlık: 8.490 kg, azami yük ağırlığı: 40.510 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.490 kg, Donanım: ABS, Chassis: - Robust welded steel frame construction with front frame drop and level loading area, rear taper approx. 500x100 mm - Neck height 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) - 2 king pin positions with interchangeable 2” king pin - Outer frame closed on the outside as a perforated outer frame for lashing with tie-down straps - Reinforced frame design / point load at the center of gravity - Prepared for extendable load width extensions - With excavator recess (open type), depth approx. 220 mm, width approx. 600 mm, beginning just after 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underrun protection = extended end plate - Drop-leg stabilizers at rear Floor: - 35 mm larch wood floor with aluminum omega profiles Axles, Steering, and Tires: - BPW air suspension axles, each with 10 t axle load, air bellow diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings Psdpfx Agewu A Slj Depw - Automatic slack adjuster - Lift and lowering mechanism, total travel approx. 200 mm - 2nd ride height setting via ball valve +50 mm - 1st axle lift axle (wired via EBS), confirmation fully automatic with mechanical emergency operation via pushbutton on trailer - 3rd axle is a friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Brake System: - Dual-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Paintwork: - Steel shot blasting, chassis spray galvanizing and priming - Painting of chassis/hub/outer frame in DB 7350 Novagrau Accessories: - Removable drop sides and tailboard on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Metal mudguards with Clear-Pass - Long number plate holder integrated in end plate - 1 removable ECE plate at rear - 11 pairs of ZK-modules 10t side-mounted: - 2x on the gooseneck - 9x on the loading area - Without rear towing eyes - Extendable warning signs incl. 3 position lamps each, at the front at landing gear and rear before end plate, infinitely extendable to a loading width of 4,500 mm - 4 holders for warning signs, insertable in stake pockets on loading area - 6 pairs of side stake pockets for insertable stanchions 100x50 mm - 2 cross rows of stake pockets for insertable stanchions 100x50 mm on gooseneck, from outer frame to main frame (1x before and 1x after king pin positions) - 3 cross rows of stake pockets for insertable stanchions 100x50 mm on loading area, from outer frame to main frame (1x at the front area, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks to accommodate one 20ft container - Rubber apron mounted on underrun protection - Preparation (wiring for NATO cable and hole pattern for retrofit installation of NATO socket at front of end plate and bracket on vehicle) for subsequent installation of an electrohydraulic unit on the right rear side for possible ramp operation - Mechanical landing legs 24t, single-sided operation with load compensation Optionally, the trailer is available with aluminum approach ramp

Durum: yeni, boş ağırlık: 12.900 kg, azami yük ağırlığı: 34.100 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 350 mm, süspansiyon: diğer, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 12.900 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading area length, approx. 3,750 mm long - Gooseneck hydraulically height-adjustable and detachable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams in extendable "SUPER LOW" design, length approx. 6,850 mm - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, checker plate covering and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outward - 1 pair of lashing rings lying in the trough - 2 pairs of stake pockets for plug-in stakes (100 x 50 mm) in the outer frame Pendulum Axle and Tires: - "PENDULUM AXLE", all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-insert to secure in lifted position - Final coating of axles with 2 layers of single-color 2K paint, painted in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires 245/70 R17.5 - TPMS (Tire Pressure Monitoring System) compliant with ECE R 141 Accessories: - Prepared for fitting of bolted container locking positions for 1x 20ft or 1x 40ft container on the external beams - 2" kingpin - Galvanized steel front wall approx. 400 mm high Ppjdjhlz R Sopfx Ag Dew - One spare wheel - On the galvanized connection strip at the front: yellow-red air couplings - 4 wheel chocks - Remote steering front and rear operable via cable remote control with push buttons, including single-track monitoring of the axles - Hydraulic connections from gooseneck to low bed with multi-coupling instead of threaded couplings - Electro-hydraulic unit - White reflector tape on sides, extension and rear, according to EU regulations - European reflector panels (red-yellow) at the rear of the trailer - At the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket - 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting of bolt-on RUD rings VLBG-4 - Removable ALU side walls and rear wall on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized plug-in posts are removable (body length approx. 2,560 mm) - Gooseneck at the upper rear area closed with a removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Fold-out extensions, approx. 230 mm per side - 2 pairs of bolt-on RUD rings VLBG-4 M24 (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed’s mounting hooks - Sanded layer painted on the loading platform as an anti-slip coating - Speed stickers 80 km/h on rear and both sides - Rear chassis’ bucket recess at the rear closed with a plug-in plate - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm - Radio remote control for the rear steering, in addition to the cable remote control, with indicator lights on the receiver as single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 - Load gauge for determining axle loads - HRM (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces hot-finished in metallization with ZINACOR 850 (Zinc 85% - Alu 15%)

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 7.500 kg, azami yük ağırlığı: 18.700 kg, toplam ağırlık: 26.200 kg, dingil konfigürasyonu: 2 dingil, toplam uzunluk: 12.400 mm, toplam genişlik: 2.550 mm, lastik boyutu: 205 / 65 r 17,5, Further Information Chassis Semi-Trailer for Freight Forwarding Fine-grain steel welded construction, kingpin plate with interchangeable 2-inch kingpin, rear bevel to approx. 1920 mm, continuous hook-in profile for ramps at the rear and front on the gooseneck, wear rollers at the rear, lowered deck from the kink to the axle assembly. Drawing approval required from the customer upon placing the order! Pair of lashing mushrooms recessed on top and side of the outer frame, each 10 tons Pair of lashing rings recessed in the outer frame on the gooseneck, each 5 tons 24 t 2-speed landing gear, single-sided operation, with straight lower section, without lateral compensation Rear support foldable, mounted externally Chocks with holder Side underrun protection, aluminium Underrun protection, steel, for EU standards, if technically feasible Quarter-shell mudguards with anti-spray mud flaps to EU standards 1 pair of wheel recesses in the lowbed section after the gooseneck, recessed in the driving lane area, inclined for easier entry. Bottom length approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses at rear bevel. Depth approx. 200 mm. Note! Frame in the main beam area is 200 mm higher than wheel recess. Detailed technical evaluation required after order placement. Wheel recess covers extendable from the lowbed with hardwood inserts, on rear bevel with hardwood inserts. Electrical winch, 24 Volt, pulling force 5500 kg, mounted at gooseneck kink, not extending onto the loading area, operated by remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide roller at the rear bevel. Axles + Suspension SAF or BPW drum brake axles at our discretion Air suspension with raise & lower valve + auto reset function Wheels and Tyres 205 / 65 R 17.5 tyres with 129/127K (132/132G) marking for 8 t tyre load capacity at max. 90 km/h manufacturer’s choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 foolproof couplings at the front, without interconnecting line EBS manufacturer: Haldex, electronic brake system with EBS socket at the front, without interconnecting cable (brake calculation sent to customer for approval, 15.07.2021) Note: The trailer must only be towed by vehicles that ensure the effectiveness of the ABS! Axle load detection via EBS CAN bus signal, for display via dashboard in the tractor unit, truck must be factory-prepared accordingly, not installed in truck (not a certified weighing system) Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without interconnecting cable Floor Gooseneck with steel / checker plate covering 30 mm phenolic plywood floor, in the lowbed between the main beams, center In the driving lane area, with serrated grating, in the wheel recesses with steel/checker plate covering. Ramps Pair of aluminium ramps, 3200 mm long, load capacity per pair 12,000 kg Pair of steel ramps for access to the lowbed Pair of steel ramps for crossing onto the gooseneck Side Boards Registration / Plates Ppjdpfx Asi Ri Hrjg Dow Registration country: Germany with Dekra inspection and certificate (according to §13 EC-Vehicle Approval Regulation) Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, yellow on sides

Durum: ikinci el, boş ağırlık: 6.560 kg, azami yük ağırlığı: 18.440 kg, toplam ağırlık: 25.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2017, yükleme alanı uzunluğu: 13.700 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 850 mm, dingil mesafesi: 7.500 mm, renk: mavi, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, basınçlı hava freni, ek farlar, * German semi-trailer * Very good visual condition, see photos * 2-axle low loader, Jumbo TO 152 DE * Loading area: length 13,700 mm x width 2,540 mm * Loading height approx. 850 mm * Stake pockets * Multilock * Wooden loading floor * Winch with cable remote control 15,000 lbs * Long aluminium ramps 3,000 x 400 mm, laterally adjustable * ROR axles * Air suspension * Haacon spindle supports * ABS + EBS * Work lights * Spare wheel * Toolbox * Drum brakes * Wheelbase 7,500 mm + 1,250 mm * Perm. gross vehicle weight 27,200 kg * Unladen weight 6,560 kg * Payload up to 20,640 kg If you require a new roadworthiness inspection (TÜV), we are happy to provide an offer through our partner workshops. Our offer is in general WITHOUT new TÜV inspection, WITHOUT new DGUV, WITHOUT new SP, WITHOUT new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and evaluation of the goods to avoid any misunderstanding regarding their condition and suitability for the buyer. Viewing and inspection are possible at any time by appointment and are expressly encouraged. All information provided without guarantee. We accept no liability for errors or incorrect details in this offer. The buyer is obliged to independently verify the condition and equipment of the items/vehicles. Pedsxu Nnwepfx Ag Depw Subject to prior sale, errors, and changes.

Durum: ikinci el, azami yük ağırlığı: 26.040 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 12/2010, Üretim yılı: 2010, Donanım: ABS, Semi-trailer Meusburger MPS-2, steered axles, Palfinger PK 26002 crane, radio control, 3 extensions, 4 m lifting capacity: 5,700 kg, 10 m lifting capacity: 2,250 kg Ppsdpfx Aerbf Uhog Dew Tractor unit: MAN TGS 26.440 6x2, Euro 5 EEV, retarder, dual-circuit hydraulics Condition: Minor rust spots, otherwise good; technically very good Tires: 80-90%

Durum: ikinci el, azami yük ağırlığı: 23.340 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2002, yükleme alanı uzunluğu: 11.000 mm, yükleme alanı genişliği: 2.520 mm, toplam genişlik: 2.540 mm, toplam yükseklik: 2.300 mm, Donanım: ABS, Nooteboom alçak yataklı dorsesi + kuğuboynu ve 3 yönlendirilebilir aks Tip: EURO5403 Taşıma kapasitesi: 23.340 kg Ppjdpey Rvuxofx Ag Dsw Fren: kampana + Sökülebilir kuğuboynu + Tüm akslar uzaktan kumandalı yönlendirme + Uzaktan kumanda Yükleme platformu: 5230 mm Yerden yükseklik: 610 mm Finansman/leasing konusunda da iş ortaklarımızla size memnuniyetle destek oluruz. Tüm bilgiler garanti verilmeksizin. Hatalar ve aradaki satışlar saklıdır.

Durum: ikinci el, boş ağırlık: 10.100 kg, azami yük ağırlığı: 38.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, Donanım: ABS, Her kullanılmış treyler için güncel ve eksiksiz bir denetim ve fonksiyon raporu alırsınız. Şasi: - Sağlam çelik şasi kaynak konstrüksiyonu, ön çerçeve kıvrımı ve arka kısmında yaklaşık 500x100 mm eğimli düz yükleme alanı - 200 mm çerçeve boynu, köşeleri eğimli - Kaz boynunun sonu eğimli, yaklaşık 500 x 100 mm (arka eğim alanında dış çerçeve üzerinde tırmanma dişleri) - Değiştirilebilir 2'' king pimli çift king pim pozisyonu - Dış çerçeve dışa kapalı, sabitleme kayışları ile yük bağlamaya uygun delikli dış çerçeve (zincir ile kullanılamaz) - Güçlendirilmiş şasi yapısı / ağırlık merkezinde noktasal yük taşıma - Yükleme alanında uzatılabilir genişletmeler için hazırlık - Ekskavatör çukuru (kapaksız), derinlik yaklaşık 220 mm, genişlik yaklaşık 600 mm, yaklaşık 2. aks sonrasında araç sonuna kadar - Aks önünde çelik kapaklı 1 çift teker çukuru - (Kapaklarda Körapur kaplama), derinlik yaklaşık 400 mm, ayrıca 1. ve 2. aks arasında çelik kapaklı 1 çift teker çukuru - Alt koruma = uzatılmış arka sac - Arka düşme ayakları Rampalar: - Özel üretim, mekanik uzatmalı 2 parçalı yükleme rampaları - Yaklaşık 2.850 mm + 1.850 mm uzunluk, hidrolik rampalı kaldırma sistemi (sadece elektro hidrolik ünite ile birlikte) - Genişlik yaklaşık 800 mm - Ahşap kaplama - Rampalarda tırmanma dişleri dahil - Sürüş pozisyonunda sabitleme kayışları ile kitlenebilir - Kumanda koluyla arka sağda kullanım - Yanlara hidrolik olarak kaydırılabilir Zemin: - 35 mm lâriç ahşap zemin, alüminyum omega profillerle Ppjdpfx Agezdzrts Dow Destek Ayakları: - Mekanik 24 ton destek ayakları, tek taraflı çalıştırma ve itme dengesiyle Akslar, Direksiyon ve Lastikler: - BPW havalı süspansiyon aksları, her biri 10 ton aks yükü, körük çapı 360 mm - S-kam fren 300/200 mm, asbestsiz fren balataları - Otomatik çubuk ayarlayıcı - Kaldırma ve indirme mekanizması, toplam kaldırma yüksekliği yaklaşık 200 mm - 2. sürüş pozisyonu, küresel vana ile +50 mm - 1. aks kaldırılabilir aks (EBS kablolu), otomatik onaylama, treylerde düğme ile mekanik acil onaylama - 3. aks kaymalı yönlendirmeli takip aksı, elektrikli ve mekanik kilitleme - 12 çelik jant, 10 delikli, merkezden presli - 12 lastik 245/70 R 17,5 143/141J, tubsuz - Lastik basınç kontrol sistemi dahil Aksesuarlar: - Kaz boynunda takılabilir yan ve arka paneller, yaklaşık 400 mm yüksekliğinde - Stepne tutucu - Yan alüminyum çarpma koruması - 4 adet takoz ve aparatı - Uzun plaka tutucu arka sacda - 1 adet arkada takılabilir ECE levhası - Yandan 11 çift ZK modül 10t: - 2x kaz boynunda - 9x yükleme alanında - Uyarı levhaları uzatılabilir, her biri 3 konum lambası, ön yükleme ayaklarında ve arka arka sac önünde, yükleme genişliği 4.500 mm'ye kadar kademesiz uzatılabilir - Yükleme alanında takılabilir uyarı levhaları için 4 yuva - Yanlarda 100x50 mm takmatik dikme için 6 çift yuva - Kaz boynunda dış çerçeveden ana şasiye kadar 2 adet 100x50 mm dikme sırası (1x king pin öncesi, 1x sonrası) - Yükleme alanında dış çerçeveden ana şasiye kadar 3 adet 100x50 mm dikme sırası (1x ön, 1x 1. aks öncesi, 1x 3. aks sonrası) - Yük platformunda konteyner kilidi için 2 çift çelik plaka, 1x 20ft konteyner alacak şekilde - Alt korumada monte edilmiş kauçuk etek

Durum: ikinci el, boş ağırlık: 10.100 kg, azami yük ağırlığı: 38.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report. Chassis: - Robust steel frame welded construction with front frame cranking and a flat loading area featuring a rear taper approximately 500x100 mm - Frame neck 200 mm with beveled corners - Sloped end at gooseneck approx. 500 x 100 mm (anti-slip ribs on the outer frame at the rear taper area) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outwards as perforated outer frame for securing with lashing straps (chains not possible) - Reinforced frame design / point load at the center of gravity - Preparation for extendable load area widenings Ppjdozabnbopfx Ag Dew - With excavator trough (uncovered), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle up to the end of the vehicle - 1 pair of wheel recesses in front of the axle with steel covers (covers with Körapur coating), depth approx. 400 mm, and 1 pair of wheel recesses between the 1st and 2nd axles with steel covers - Underrun protection = extended end plate - Drop-down supports at the rear Ramps: - Special two-part loading ramps with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting system (only in connection with electrohydraulic unit) - Width approx. 800 mm - Wooden deck - Including anti-slip ribs on the ramps - Secured in transport position with lashing straps - Operation via control lever mounted at the rear on the right in driving direction - Hydraulically adjustable sideways Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gear: - Mechanical 24 t landing legs with single-sided operation and stroke compensation Axles, Steering, and Tires: - BPW air suspension axles, each with a 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lowering device with total stroke approx. 200 mm - 2nd ride height via ball valve +50mm - 1st axle lift axle (wired through EBS), automatic confirmation with mechanical emergency activation via button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-hole, mid-centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Removable side and rear boards on the gooseneck approx. 400 mm high - Spare wheel carrier - Side aluminum underrun protection - 4 wheel chocks with holders - Elongated license plate holder in end plate - 1 removable ECE plate at the rear - 11 pairs of ZK-modules 10t on the sides: - 2x on the gooseneck - 9x on the loading area - Extendable warning boards, each with 3 position lamps, at the front on landing gear and at the rear before the end plate, steplessly extendable up to a loading width of 4,500 mm - 4 mountings for warning boards that can be inserted into stake pockets on the loading area - 6 pairs of side stake pockets for plug-in stakes 100x50 mm - 2 rows of crosswise stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame inward up to main frame (1x before and 1x after king pin positions) - 3 rows of crosswise stake pockets for plug-in stakes 100x50 mm on the loading area from outer frame inward up to main frame (1x in the front area, 1x before 1st axle, and 1x after 3rd axle) - 2 pairs of steel plates on the loading area for container locks for accommodation of 1x 20ft container - Rubber apron mounted on underrun p

Durum: yeni, boş ağırlık: 8.900 kg, azami yük ağırlığı: 40.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.900 kg, Chassis: - Robust welded steel frame construction with front frame downturn and flat loading area, rear chamfer approx. 500x100 mm - Neck of the frame: 200 mm with beveled front corners - Sloped end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with replaceable 2” king pin - Outer frame closed on the outside as a perforated outer frame - Loading platform with extendable central beam, extendable by approx. 2,000 mm, lockable pneumatically in steps of 500 mm - Frame before and after extension section with 80x80 mm step - Reinforced frame design / point load optimized in retracted state at the center of gravity - No extendable widening elements in the loading area, but prepared for retrofitting (guide tubes welded in frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle and extending to the rear end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection: extended end plate - Drop down support legs at the rear Axles, Steering, and Tyres: - BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired to EBS), automatic confirmation with manual emergency operation via button on the trailer - 3rd axle is a friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with hub-centred offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Tire pressure monitoring included Accessories: - Removable side and rear boards on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminium underride protection - 4 wheel chocks with holders - Elongated license plate bracket on end plate - 1 removable ECE sign at the rear - 11 pairs of ZK modules 10t at the sides: - 2x on the gooseneck - 2x on the loading area in front of the extension - 7x after the extension - Extendable warning panels incl. 3 position lamps each, at front on landing gears and rear before end plate, steplessly extendable to a load width of 4,500 mm - 4 holders for warning panels, mountable in stake pockets on the loading area - 6 pairs of side stake pockets for stakes 100x50 mm - 2 rows of transverse stake pockets for stakes 100x50 mm on gooseneck, from outer frame inwards to main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for stakes 100x50 mm on loading area, from outer frame inwards to main frame (1x before the extension, 1x after the extension, 1x after 3rd axle) Ppsdpfx Agexnnk Do Djw - 2 pairs of steel plates in loading area for container locks suitable for 1x 20ft container - Rubber skirt fitted to underrun protection The trailer is optionally available with ramps.

Durum: yeni, boş ağırlık: 10.100 kg, azami yük ağırlığı: 38.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, işletme ağırlığı: 10.100 kg, Donanım: ABS, Chassis: - Robust steel frame weldment with front frame cranking and flat loading surface with rear tapering approx. 500x100 mm - Neck of frame 200 mm with chamfered corners - Tapered end of gooseneck approx. 500 x 100 mm (anti-slip ribs on outer frame in the rear taper area) - 2 king pin positions with replaceable 2" king pin - Outer frame closed on the outside, perforated profile for lashing with tension straps (chains not possible) - Reinforced frame version / point load at centre of gravity - Provisions for extendable widening devices in the loading area - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle up to rear end - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underrun protection = extended end plate - Drop-down supports at the rear Ramps: - Two-part loading ramps, special version with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting device (only in combination with electro-hydraulic power pack) - Width approx. 800 mm - Timber surface - Incl. anti-slip ribs on the loading ramps - Secured in travel position with tension straps - Operation via control lever mounted at the rear, right in direction of travel - Laterally hydraulically adjustable Floor: - 35 mm larch floorboards with aluminium omega profiles Landing Gear: - Mechanical 24t landing legs with single-side operation and push compensation Axles, Steering and Tyres: - BPW air suspension axles, each with 10t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering mechanism with total lift approx. 200 mm - 2nd driving height via ball valve +50mm - 1st axle lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on the trailer - 3rd axle as friction steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, with mid-offset centering - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tyre pressure monitoring Accessories: - Plug-in side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel mounting - Lateral aluminium side impact protection - 4 wheel chocks - Elongated number plate holder in the end plate - 1 ECE panel insertable at the rear - 11 pairs of ZK modules 10t lateral: - 2x on the gooseneck - 9x on the loading surface - Steel mudguards with clear-pass - Slidable warning panels including 3 position lamps each, at the landing legs in front and behind the end plate, continuously extendable up to loading width of 4,500 mm - 4 removable holders for warning panels plug-in into stake pockets on the loading surface - 6 pairs of side stake pockets for 100x50 mm stakes - 2 rows of transverse stake pockets for 100x50 mm stakes on the gooseneck from outer frame to the main frame (1x in front of and 1x behind king pin positions) - 3 rows of transverse stake pockets for 100x50 mm stakes on the loading surface from outer frame to main frame (1x front area, 1x in front of 1st axle, 1x behind 3rd axle) - 2 pairs of steel plates in loading surface for container locks to accommodate 1 x 20ft container Ppodpfowviwkjx Ag Djw - Rubber flap fitted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted DB 7

Durum: ikinci el, boş ağırlık: 8.900 kg, azami yük ağırlığı: 40.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, Donanım: ABS, With every used semi-trailer, you receive a current and complete inspection and functional report. Ppjdpfx Aoywv Ixeg Dow Chassis: - Robust steel frame welded construction with front frame neck and flat loading area with rear taper approx. 500x100 mm - Neck height 200 mm with chamfered front corners - Inclined goose neck end approx. 500 x 100 mm (climbing ribs along the outer frame in the rear taper area) - Two kingpin positions with exchangeable 2” kingpin - Outer frame closed outward, constructed as a slotted outer frame - Loading platform with extendable central beam, can be extended by approx. 2,000 mm, pneumatically lockable at 500 mm intervals - Frame before and after division with 80x80 mm step - Reinforced frame design / point load in retracted position at the center of gravity - No extendable load bed wideners, but prepared for retrofitting (= guide tubes welded into frame) - With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to the end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), approx. 400 mm deep - Underrun protection = extended end plate - Drop leg supports at rear Floor: - 35 mm larch timber flooring with aluminum omega profiles Axles, steering, and tires: - BPW air suspension axles, 10 to axle load each, air spring diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering system with total stroke approx. 200 mm - Second driving position via ball valve +50 mm - First axle as lift axle (wired via EBS), fully automatic activation with manual emergency actuation via push button on the trailer - Third axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-bolt, hub-centered - 12 tires, 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Accessories: - Plug-in side boards and rear board on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum impact protection - 4 wheel chocks with holder - Elongated number plate holder in end plate - 1 ECE insertable reflector board at rear - 11 pairs of 10t side ZK lashing modules: - 2x on the gooseneck - 2x on the platform before extension - 7x after extension - No rear towing eyes - Extendable warning boards including 3 position lamps each at the front at the landing gear and rear before the end plate, steplessly extendable to loading width of 4,500 mm - 4 insertable sockets for warning boards in stakes pockets on the platform - 6 pairs of side stake pockets for 100x50 mm stake inserts - 2 rows of cross stake pockets for 100x50 mm stakes on the gooseneck from outer frame inward to main frame (1x before and 1x after kingpin positions) - 3 rows of cross stake pockets for 100x50 mm stakes on the load platform from outer frame inward to main frame (1x before extension, 1x after extension, and 1x after 3rd axle) - 2 pairs of steel plates in the platform for container locks to accommodate one 20ft container - Rubber apron mounted on underrun protection - Preparation (= cable routing for NATO cable and drilling pattern for later installation of NATO socket at the front end plate, as well as holder on the vehicle) for retrofitting electrohydraulic power unit on the right rear, for possible control of loading ramps Optional: The trailer is available with aluminum approach ramps.

Durum: yeni, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.200 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Aks yük göstergesi ile, yükleme alanı uzunluğu 8.200 mm, yükleme yüksekliği dolu iken yaklaşık 900 mm, her biri 10 ton taşıma kapasiteli 20 x sabitleme halkası, dış çerçevede 14 x kazık cebi, rampa boyutları (yaklaşık 3.000 x 750 mm), rampa ve arka eğimde tırmanma çıtası, rampalar yana ayarlanabilir, tek parça rampalar için yaylı kaldırıcı, 70 mm kalınlıkta ahşap zemin, zincir veya gergi için kapaklı saklama kutusu, yönetmeliğe uygun kontur işaretleri, yaylı park freni, araç daldırma ile sıcak daldırma galvanizli, aks yük göstergeleri dahil. İlave fiyatlar: uyarı levhaları + aydınlatma + döner uyarı lambası = Fiyat: 800 €, 3 m’ye genişletme = Fiyat: 1.100 €, hidrolik tek parça rampalar 500 €, rampaların hidrolik kaydırılması? = Fiyat: 1.000 €, kepçe cebi = Fiyat: 1.000 €. 9,20 m yükleme alanı uzunluğunda seçenek de stokta mevcut. -- Yazım hatası ve değişiklik hakkı saklıdır, örnek resimler --. Daha fazla bilgi için: !, More Details: ! Psdpfxozqfmus Ag Djpw

Durum: yeni, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.600 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Loading height (loaded): approx. 980 mm, 20 lashing eyes rated at 6 t each, 20 lashing brackets rated at 6 t each, 18 lashing holes, 7 central stake pockets, 14 stake pockets in the outer frame, 2 pairs of container locks, Surcharge for front wall approx. 1,600 mm high, plug-in, Price: €1,500, Surcharge for extendable drawbar, Price: €1,500, Surcharge for 4 warning boards with lighting, Price: €800. Also available with a loading bed length of 8,600 mm! Printing errors, mistakes, and changes reserved, sample images. More data and details available on request! Ppjdpfx Ajzn Ny Tsg Dsw

Durum: ikinci el, boş ağırlık: 5.300 kg, azami yük ağırlığı: 12.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2010, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.900 mm, yükleme alanı hacmi: 52 m³, süspansiyon: hava, lastik boyutu: 235/75R17,5 ---/141J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 ---/141J, arka lastik boyutu: 235/75R17,5 ---/141J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Lashing eyes, -- Errors, omissions, and changes excepted, sample images --, More data at: !, More details: ! Ppjdoznz Tfjpfx Ag Dsw

Durum: ikinci el, boş ağırlık: 4.300 kg, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2019, yükleme alanı uzunluğu: 7.200 mm, süspansiyon: hava, lastik boyutu: 445/45 R19,5 160J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 445/45 R19,5 160J, arka lastik boyutu: 445/45 R19,5 160J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, -- Druckfehler, Irrtümer und Änderungen vorbehalten, Musterbilder -- Weitere Informationen unter: !, Mehr Details: ! Ppodpfxoznz Hfj Ag Dow

Durum: ikinci el, boş ağırlık: 5.300 kg, azami yük ağırlığı: 12.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2010, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.900 mm, yükleme alanı hacmi: 52 m³, süspansiyon: hava, lastik boyutu: 235/75R17,5 ---/141J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 ---/141J, arka lastik boyutu: 235/75R17,5 ---/141J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Lashing eyes, -- Errors, omissions, and changes excepted, sample images --, More data at: !, More details: ! Pedpfxjznut Sj Ag Depw

Durum: yeni, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Yükleme yüksekliği (yüklü): yaklaşık 940 mm, 20 adet 6 tonluk sabitleme halkası, 20 adet 6 tonluk sabitleme kemeri, 18 adet sabitleme deliği, ortada 7 adet payanda cebi, dış şasede 14 adet payanda cebi, 2 çift konteyner kilidi, Ön duvar için ek ücret, yaklaşık 1.600 mm yüksekliğinde, takıp çıkarılabilir Fiyat: 1.500 €; Uzatılabilir çekme çubuğu için ek ücret Fiyat: 1.500 €; 4 adet uyarı levhası ve aydınlatma için ek ücret Fiyat: 800 €; Ayrıca yükleme alanı uzunluğu 7.600 mm olarak da temin edilebilir! -- Yazım hataları, yanlışlıklar ve değişiklikler önceden bildirilmeden yapılabilir, örnek görseller -- Daha fazla bilgi için: ! Pedpfxsznidxj Ag Depw

Durum: ikinci el, azami yük ağırlığı: 18.000 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/1987, yükleme alanı uzunluğu: 12.340 mm, yükleme alanı genişliği: 2.620 mm, toplam genişlik: 2.750 mm, toplam yükseklik: 1.450 mm, Düşük yatak: Toplam uzunluk - 8.530 mm, 1. aksa kadar uzunluk - 4.360 mm, yükleme yüksekliği - 690 mm, iki aks üzerinde uzunluk - 1.800 mm, yükleme yüksekliği: 900 mm, akslar arkasındaki uzunluk - 2.130 mm, rampa yüksekliği - 830 mm, ön eğim 240 mm, genişlik: 2.620 mm, kuğu boynu: 3.900 mm, treyler bağlantı yüksekliği 1.180 mm, ön king pin konumu: 1.150 mm, Alüminyum rampalar (UxG) 2.880x500 mm, yan başına 4 adet ağır yük sabitleme halkası, JOST destek ayakları, SAF aks(lar), kampanalı fren sistemi, yaprak süspansiyon, araç reklam ile kaplanmış ve/veya yazılı olabilir. Ppedoyqdgujpfx Ag Dew SI85673 Teklifimiz genel olarak yeni TÜV muayenesi olmadan geçerlidir. Yeni TÜV muayenesi istenirse, partner atölyelerimizden memnuniyetle teklif sunarız! Araç reklam ile kaplanmış ve/veya yazılı olabilir. Genel teslimat ve ödeme şartlarımız geçerlidir. Bu ürün için size finansman veya leasing teklifi sunmaktan memnuniyet duyarız. Lütfen bizimle iletişime geçin!

Durum: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2026, bir sonraki muayene (TÜV): 06/2027, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 300 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 300 mm, Üretim yılı: 2026, Donanım: ABS, DOLL tera 2 akslı, düşük platformlu, döner dingilli yarı römork Yeni araç, ilk ruhsat tarihi: 30.06.2026 Boş ağırlık 13.950 kg İzin verilen toplam ağırlık (teknik) 45.000 kg Kuğu boynu uzunluğu 3.070 mm Sele yüksekliği 1.200 ila 1.280 mm Dönme yarıçapı 2.350 mm Düşük platform uzunluğu 6.800 mm Teleskopik uzunluk 5.700 mm Arka akslı şasi uzunluğu 2.700 mm Kazma kolu çukuru genişliği 700 mm Kazma kolu çukuru derinliği 550 mm Düşük platform yükseklik 300 mm Şasi üzerinden yükseklik 955 mm Yarı römork genişliği 2.550 mm Hidrolik süspansiyon -70 / +530 mm Sele yükü (teknik, maks.) 21.000 kg Aks yükü 24.000 kg Dışa doğru konumlandırılmış ana çerçeveye sahip, ayrılabilir kuğu boynu Yarı römorkun boyası, galvanizleme dahil 3 kat Doll Tronic CAN-Bus sistemi Düşük platformdaki zemin, düz yatak çerçeveleri arasında 45 mm kalınlığında çam ahşap plakalar 24 voltluk elektrikli hidrolik sistem Kuğu boynundaki DOLL tuş takımları ile yarı römork fonksiyonlarının kontrolü UZAKTAN KUMANDALI EK DİREKSİYON Düz hat sürüşünde elektronik tek şeritli sürüş (EEG) Düşük platformdaki LaSi (Yük Sabitleme Sistemi): 7 çift dönebilen sabitleme halkası, 13.400 daN sabitleme kuvveti Dış çerçevede 5 çift oluklu yuva Dış kısımda, sabitleme braketlerinin vidalanması için 3 çift M36 diş DOLL tera döner dingilli şasi, hidrolik süspansiyonlu BPW akslar Tüm akslar, son aksta maksimum 60° direksiyon açısıyla hidrolik olarak zorunlu olarak yönlendirilir Tüm yağlama noktaları, merkezi yağlama sistemine (ZSA) bağlıdır WABCO yarı römork EBS sistemi, ABS ve RSS ile Alüminyum hava tankı Ön ve arka kısımda BEKA-MAX merkezi yağlama sistemi Ppedpfx Ajzmqmxog Dsw Katlanabilir yükleme yüzeyi genişletmeleri (2x 225 mm) ve 3.200 mm genişliğe kadar uzatılabilen uyarı levhaları içeren genişlik fazlası paketi Lastikler 8 adet 245/70 R 17,5 KİRALAMAK yeni SATIN ALMAK demektir, bizde de tam hizmetli kiralama seçeneği HEMEN kullanılabilir.

Durum: ikinci el, azami yük ağırlığı: 12.910 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2012, bir sonraki muayene (TÜV): 08/2026, yükleme alanı uzunluğu: 7.410 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 3.050 mm, yükleme alanı hacmi: 56 m³, Donanım: ABS, * 7024 - Telefonla yapılacak sorular için araç kimliği * ABS, EBS, SAF akslar, hava süspansiyonu (kaldırma ve indirme), kampana frenler, ikiz tekerlekli, uzunluğu ayarlanabilen çekme çatalı - eğimli, çekme halkası 40 mm * Kayar tente, yükleme alanında cam çerçeveleri için sabitleme çıtaları, bağlama halkaları, palet durdurma çıtası sol ve sağ tarafta, arka tarafta rulo branda, arka tarafta 65 cm alüminyum bordür * 1. aks lastiği: 235/75R17,5 (6 / 8 / 7 / 9 mm) * 2. aks lastiği: 235/75R17,5 (4 / 5 / 4 / 4 mm) ----E-posta adresimiz: Ppsdjyg Ukpjpfx Ag Dow     Sizin için sunduğumuz hizmetler:      - Kısa süreli veya gümrük plakası temini      - Avrupa genelinde nakliye / teslimat      - Üçüncü bir ülkeye araçların gümrüklemesi İngilizce, Almanca, Rusça ve diğer diller için WhatsApp:

Durum: ikinci el, azami yük ağırlığı: 12.250 kg, toplam ağırlık: 16.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2017, yükleme alanı uzunluğu: 6.950 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 730 mm, yükleme alanı hacmi: 12 m³, Donanım: ABS, * 9075 - Telefonla yapılan sorular için araç kimlik numarası * ABS, EBS, BPW akslar, çift lastik, kampana frenler, hava süspansiyonu (kaldırma + indirme), kıvrımlı çekme çubuğu, alüminyum yan paneller, sabitleme halkaları, yükleme alanında cam çerçeveleri için 4 x çıta, saklama kutusu * Yükleme yüksekliği: 0,95 m * Ön lastikler: 215/75R17,5 (7 / 7 / 8 / 7 mm) * Arka lastikler: 215/75R17,5 (7 / 7 / 7 / 8 mm) ----E-posta adresimiz:     Sizin için sunduğumuz hizmetler:       - Kısa süreli veya gümrük plakası temini       - AB genelinde nakliye / teslimat       - Üçüncü bir ülkeye araçların gümrükleme işlemleri Podpfsw S Abyex Ag Dspw İngilizce, Almanca, Rusça ve diğer diller için WhatsApp:

Durum: yeni, boş ağırlık: 4.300 kg, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.100 mm, yükleme alanı genişliği: 2.480 mm, süspansiyon: hava, lastik boyutu: 275/70R22,5, Donanım: ABS, | Schwarzmüller Jumbo construction materials trailer | BPW axles with disc brakes | Pallet box, 2x stainless steel toolboxes | Rear storage compartment 600x400x2,900 mm | Drop side height 1.00 m, front wall height 1.40 m | Loading dimensions: 7.10 m x 2.48 m | XLite aluminium rims | Tyres: 275/70R22.5 twin tires | Plastic tarpaulin cover with rubber straps | Aluminium storage tray and front access step | Subject to errors, input mistakes, and prior sale. Ppodpfjtuwbpox Ag Djw

Durum: ikinci el, azami yük ağırlığı: 26.300 kg, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2001, bir sonraki muayene (TÜV): 02/2026, yükleme alanı uzunluğu: 6.697 mm, yükleme alanı genişliği: 2.320 mm, yükleme alanı yüksekliği: 1.635 mm, yükleme alanı hacmi: 24 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.300 mm, Donanım: ABS, * 1. Aks kaldırılabilir * Platform * Kapama brandası * BPW ECO akslar, tamburlu frenlerle ----* Lastik boyutu: 445/45R19,5 * Teknik toplam ağırlık: Ppsdpfx Agoym Iyqo Djw * Kendi ağırlığı: 5700 kg * Toplam uzunluk: 8700 mm * Muayene tarihi: 08.2026 ----Araç numarası/Vehicle: 11808----Hatalar ve önceden satış mahfuzdur.----Reklamlar ve çeşitli yazılar dijital olarak kaldırılmıştır.-----Bir araç satın alırken gerekli olan tüm formalitelerde size tavsiye ve destek sağlamaktan memnuniyet duyarız. İhtiyaçlarınızı ve önerilerinizi bize bildirin, biz de gerekenleri yaparız. Başka hizmetlerin yanı sıra, ek ücret karşılığında aşağıdaki hizmetleri de sunabiliriz:----Eski aracınızın takas edilmesiTÜV/muayene onayıTamamen ihracat işlemlerinin halledilmesiFinansman sağlanmasıİhracat plakası başvurusunun yapılmasıAraçların nakliyesiAraçların tesciliAraç kurtarma ve taşıma hizmetleri----?SİZİN VTS EKİBİNİZ

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 9.000 kg, azami yük ağırlığı: 29.000 kg, toplam ağırlık: 38.000 kg, ilk tescil: 08/2020, renk: kırmızı, Üretim yılı: 2020, ES-GE 2-Axle Lowbed, non-extendable, Tridec Steering Gross weight: 38,000 kg Axle load (2 x 10,000 kg): 20,000 kg Fifth-wheel load: 18,000 kg Unladen weight +/- manufacturer's tolerance: approx. 9,000 kg Payload: approx. 29,000 kg Overall length: approx. 13,650 mm Overall width: approx. 2,540 mm Loading platform length: approx. 13,200 mm Loading platform width: approx. 2,540 mm Front overhang: approx. 1,200 mm Front radius: approx. 1,750 mm Swing radius (tractor unit): approx. 2,100 mm Coupling height: approx. 1,150 mm B-dimension: approx. 12,000 mm Raised bed length: approx. 3,700 mm Raised bed loading height: approx. 1,480 mm Lowbed length: approx. 6,500 mm Lowbed loading height: approx. 250 mm Lowbed ground clearance: approx. 100 mm Loading height above axle assembly: approx. 3,000 mm Tractor unit details A-dimension: approx. 4,500 mm Coupling height: approx. 1,150 mm Swing radius: approx. 2,100 mm Podpfou U Np Tex Ag Dspw Chassis: - Chassis manufactured from high-quality fine-grain steels - Lowbed in rigid construction - Axle assembly not detachable - Without excavator trough Kingpin - 2" kingpin Landing legs - Without front landing gear Axles - 2 x 10,000 kg axles (17.5"), technically rated at 12,000 kg each – brand: Gigant - Enclosed drum brakes, asbestos-free brake linings - Automatic slack adjusters, centralizing device - Axle spacing approx. 1,360 mm Suspension - Air suspension with lift and lower system - Second ride height for air suspension (+ approx. 30 mm) Steering - Hydraulic axle steering - All axles steered, make "Tridec" Tyres - 9 tyres 245/70 R 17.5, load index 146/146 F – tyre brand: Continental - Steel rims Brakes - Dual-line air brake system according to EC directive, make "Knorr" - Automatic load-dependent brake force regulator - Operated via standard air couplings, red/yellow, acc. ISO 1726 - Electronic brake system (EBS), 7-pin socket acc. to ISO 7638, mounted at the front, acc. to EU regulations. With ABS 4S/2M - With RSS (Roll Stability Support) - Parking brake with spring-loaded cylinder - 4 wheel chocks with holders - Without connecting hoses (Wendeflex) to tractor - Aluminium air tanks - TIMG2 (Trailer Information Module) installed for current axle load readout Rear underrun protection - Integrated into the rear end plate Side frame - Side frames made of UNP steel, approx. 200 mm Load securing - 13 lashing points per side with 13,400 kg tensile force, foldable outwards, mounted on the outer frame - 1 pair of lashing rings with approx. 13,400 kg lashing capacity in the rear area of the gooseneck, approx. 400 mm above the ground - 1 pair of lashing rings with approx. 13,400 kg tensile force at the rear of the lowbed at the vertical neck - 7 stake pockets per side on the inside of the outer frame for bolsters approx. 80x50x4 mm, evenly distributed along the loading platform - 6 stake pockets per side welded externally onto the longitudinal beam Floor - Approx. 28 mm hardwood floor with Omega profiles, fitted between the longitudinal beams - Chequer plate (approx. 8/10 mm) above axle assembly Bulkhead - Designed as a toolbox with lid, approx. D 400 x H 450 mm, spanning the full width of the loading platform, corners chamfered Side panels - 3 removable, anodised side panels on the gooseneck, approx. 2,440 x 400 mm - Removable stanchions at rear, galvanized Finishing - All steel parts shot-blasted - Chassis spray-galvanized Paintwork - Primer and single-color coating in RAL 3002 flame red - Axles and landing gear KTL-c