Kullanılmış Schwarzmüller Rh240 Jumbo Plateau Tieflader Ausziehbar > Neu < satın al (3.981)

Koşul: yeni, toplam ağırlık: 36.700 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, Schwarzmüller RH240 Jumbo Flatbed Semi-Trailer Low Loader Extendable, telescopic – for building material and construction machinery transport – NEW – UNUSED – Gross vehicle weight: 36,000 kg Unladen weight: 10,340 kg Internal length approx. 13,570 mm = Front platform length approx. 3,950 mm Rear platform length approx. 9,620 mm Platform width at lower deck approx. 2,540 mm Loading height in low bed, unladen, approx. 830 mm Frame: Extendable central frame welded construction Extension length: 6,000 mm Pneumatically lockable, operated on the trailer + additional position for 40ft container in the low bed Reinforced design for building material transport, rated for 20 t over 5 m at center of gravity and for construction machinery transport up to 20 t Frame suitable for transporting wooden components measuring approx. L/W/H 13,000/575/3,200 mm Reinforced frame for point loads front and rear at support block Reinforced outer frame in gooseneck area: 6 mm Reinforced outer frame in low bed: 6 mm Tapered cross members Sliding intermediate support approx. 300 mm (non-removable), mechanically lockable, designed as stanchion pocket cross member for square tube stanchions 80x80 mm, plus 1 pair 5 t lashing rings integrated on the outer part of the intermediate support Hjdpfxou A Nile Ahzsnl Frame for 2-axle tractor units and fifth wheel height unladen approx. 960 mm - 1,020 mm with air-suspended tractor 3 pairs front and 10 pairs rear of 10 t lashing rings, extendable on each side of the outer frame, fold-out for oversize load strapping 10 pairs of lashing mushrooms with welded round steel at the bottom of the outer frame Frame attachments: 10 pairs of plug-in brackets with reinforcement beams for 80x80 mm square stanchions, both sides of outer frame 6 stanchion pocket crossbeams for 80x80 mm square stanchions 24 steel square tube stanchions, 80 x 80 x 5 mm, usable height approx. 2,000 mm, with lashing holes on top for straps, hot-dip galvanized 3 pairs of container locks in the low-bed platform, retractable, for: 1 x 20ft container 1 x 30ft container 1 x 40ft container (when extended) U-profile ramp rail at rear end of frame Support device: Mechanical steel landing gears, 2 x 12 t 2 drop-down supports, both sides at rear of frame Wheels: Tyres 205/65 R 17.5 Steel rims 6.00 x 17.5 Axles: SAF low loader axles with drum brakes Axle lift on 1st axle Axle spacing 1,310 + 1,410 mm Friction-steered SAF trailing axle, approx. 20° steering angle, electropneumatic reverse lock automatically activated via reverse gear Last axle is trailing steered Braking system/suspension: Wabco brake system Brake/air connections with 2 single coupling heads yellow/red EBS/ABS socket at front Air suspension with lift and lower device, total lift approx. 200 mm Automatic ride height adjustment from 15 km/h Assistance/safety systems: Standard reporting interval Every 15 minutes with ignition on Every 24 hours with ignition off Axle load indication via EBS-CAN bus signal for display in driver's cab (truck must be pre-equipped) Wabco SmartBoard for reading data via display (odometer, axle module load, brake diagnostics, etc.) Floor: 35 mm larch timber floor, impregnated on both sides, laid lengthwise with small gaps, over wheels with steel chequer plate cover Front wall: Fixed profiled steel front wall, approx. 2,700 mm high with 2 center supports 2 front corner pillars, integrated in front wall, bolted at face end 2 lashing eyes each at top of front corner pillars At goo

Koşul: ikinci el, azami yük ağırlığı: 25.660 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2022, Üretim yılı: 2022, Donanım: ABS, Schwarzmüller RH240 Jumbo Flatbed Low Loader Semi-Trailer, Day Registration Extendable and telescopic – for transport of construction materials and construction machinery – Condition: as new – GVW 36,000 kg Unladen weight 10,340 kg Internal length approx. 13,570 mm = Front platform length approx. 3,950 mm Rear platform length approx. 9,620 mm Platform width at the lower deck approx. 2,540 mm Loading height in the well (unloaded) approx. 830 mm Frame: Extendable central frame welded construction Extension length 6,000 mm Hjdpfju A Nhnsx Ahzjnl Pneumatically lockable, actuated on the trailer + additional position for 40ft container in the well Reinforced version for building material transport, rated for 20 t over 5 m at the center of gravity and for construction machinery up to 20 t Frame suitable for transporting timber components L/W/H approx. 13,000/575/3,200 mm Reinforced frame for point loads at front and rear with bearing block Reinforced outer frame on gooseneck platform 6 mm Reinforced outer frame in the well 6 mm Tapered cross members Sliding intermediate support approx. 300 mm (non-removable), mechanically lockable, designed as stanchion cross member for box section stanchions 80x80 mm; also 1 pair of 5 t lashing rings integrated into the intermediate support externally Frame suitable for 2-axle tractor units, fifth wheel height (unloaded) approx. 960 mm – 1,020 mm with air suspension At the front, 3 pairs and at the rear, 10 pairs of 10 t lashing rings extendable from the outer frame, on both sides, can also be folded outward for overwidth securing 10 pairs of lashing mushrooms with welded round steel at the lower outer frame Frame attachments: 10 pairs of plug-in holders with reinforcement beams for box section stanchions 80x80 mm, on both sides of outer frame 6 stanchion cross members for box section stanchions 80x80 mm 24 steel box-segment stanchions 80x80x5 mm, usable height approx. 2,000 mm, with lashing holes at top for tie-down straps, hot-dip galvanized 3 pairs of container locks in the low bed platform, retractable, for: 1 x 20ft container 1 x 30ft container 1 x 40ft container (when extended) U-profile rail for loading ramps at frame end Support equipment: Mechanical steel support winches, 2 x 12 t 2 drop-down supports, both sides at rear of frame Wheels: Tires 205/65 R 17.5 Steel rims 6.00 x 17.5 Axles: SAF low loader axles with drum brakes Axle lift on 1st axle Axle distance 1,310 + 1,410 mm Steered trailing SAF axle, approx. 20° steering angle, electro-pneumatic reverse lock, automatically engaged in reverse gear Last axle is steered trailing axle Braking system/Suspension: Wabco branded brake system Brake/air connections with 2 single coupling heads yellow/red, EBS/ABS socket at front Air suspension with lift/lower feature, total stroke approx. 200 mm Automatic adjustment to programmed ride height above 15 km/h Assistance/Safety Systems: Standard reporting interval Every 15 minutes when ignition is on Every 24 hours when ignition is off Axle load display via EBS CAN bus signal for display in truck cab (truck must be pre-equipped) SmartBoard by Wabco for data readout via display (kilometers, axle group load, brake diagnostics, etc.) Floor: 35 mm larch wood floor, double-sided impregnated, longitudinally laid with small gaps, with steel chequer plate covers over the wheels Front wall: Fixed profiled steel front wall, approx. 2,700 mm high with 2 central supports 2 front corner posts, integrated into the front wa

Koşul: yeni, azami yük ağırlığı: 23.800 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Complete specification available on request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = Raised front platform including neck, corners chamfered * Approx. 5,350 mm = Low-bed platform – flat loading area * Approx. 850 mm = Rear ramp slope * Overall width approx. 2,550 mm (or with extensions approx. 3,000 mm) * Loaded loading height approx. 870 mm * When assembling a combination, please ensure compliance with the legally permissible total height and length! Chassis: * Steel welded construction with front neck and chamfered rear * Ramp slope with excavator bucket recess in center = rear depression between main beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing rails (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, retractable approx. 10 t lashing rings (4x in the low-bed, 1x in the ramp slope, 2x on the raised platform) * Standard ball-bearing slewing ring Chassis Attachments: * Pull-out extensions with softwood planks approx. 50 mm on both sides of the low-bed platform (track width of construction machines to be transported must not exceed outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, allocation: 1 pair at front raised platform inside main beams; 1 pair at the very rear in the bucket recess left and right; 1 pair at front raised platform in front of the neck, inside main beams; 1 pair at the rear of low-bed in front of ramp slope, in the bucket recess left and right Towing Equipment: * Fixed drawbar with swivel towing eye approx. 40 + 50 mm, cranked design, silent bushing bearing, drawbar hold spring with tensioner * Truck coupling height from approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Hnedpfx Aoy Aug Rshzsl Support Equipment: * 2 pcs. automatic folding rear supports Axles: * SAF air-suspension low-loader axles with drum brakes, axle load 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 12 pcs. tires 235/75 R 17.5, 141J, manufacturer according to factory selection Brake System/Suspension: * Brake system in accordance with ECE directive R13 * Two-line compressed air brake system * Manufacturer Wabco, EBS system 4S3M, 1st and 2nd axle monitored * RSS/RSP stability program * Spring-actuated parking brake on 2nd and 3rd axle * Brake/air connection lines with 2 individual couplings yellow/red * EBS/ABS connection cable * Air suspension with lifting/lowering facility (only on rear axles), automatic ride height adjustment from 15 km/h (RTR), with axle stop on front axle Assistance/Safety Systems: * SWIT – Schwarzmüller Intelligent Telematics * Axle load display via EBS CAN bus signal for display in truck cab (truck must be prepared accordingly, not a certified scale) * Tire pressure monitoring as per ECE directive 141, with pressure sensor in the wheels, for display in truck cab (display unit etc. must be available in the tractor unit) Floor: * Softwood floor approx. 50 mm, impregnated, projecting approx. 5–10 mm above frame upper edge * Steel checker plate covering above wheels Ramps: * 2 pcs. foldable single-piece lightweight steel loading ramps, length approx. 2,800 mm, width approx. 750 mm, with impregnated hardwood floor approx. 35 mm * Ramps adjustable in width from intermediate di

Koşul: yeni, azami yük ağırlığı: 30.860 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.550 mm, Donanım: ABS, Our complete vehicle inventory, including vehicles available immediately and at short notice, can be found on our website. Excerpts from the equipment list. Full equipment details available on request. Frame: * Steel welded construction with front frame drop, front corners chamfered and rear taper, drive-on ramp with centrally positioned excavator bucket recess = rear depression between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t rated lashing brackets, 7 pairs of recessed, pull-out approx. 10 t lashing rings (2x on the raised platform, 1x in the front frame drop, 3x in the lowbed between the wheel recesses and 1x in the drive-on ramp) 2 pairs of wheel recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located at the front after the frame drop including one-piece drive-over aluminium cover, for max. surface load of approx. 11,650 daN/unit * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), located between the 3rd and 4th axles, including one-piece drive-over aluminium cover, suitable for the transport of wheel loaders with a wheelbase of approx. 2,700 - 3,600 mm, with wheel diameter around 1,485 – 1,740 mm, maximum wheel loader overhang at rear 2,220 mm * Width between the wheel recesses approx. 1,255 mm (= outer edge to outer edge of longitudinal beams) Frame attachments: * 5 pairs of receptacle sockets in the outer frame for square tube stanchions approx. 100 x 50 x 5 mm (3x in the lowbed, 2x on the raised platform) * Both sides of the lowbed platform extendable widening with softwood planks approx. 50 mm (track width of construction machinery to be transported must not exceed outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, arranged: 1 pair at the front of the raised platform inside the longitudinal beams, 1 pair at the very rear in the excavator bucket recess left and right, 1 pair at the front of the raised platform before the frame drop inside the longitudinal beams, 1 pair at the rear of the lowbed before the drive-on ramp in the excavator bucket recess left and right Drawbar: * Fixed drawbar with approx. 50 mm heavy-duty towing eye, cranked version, silent bushing mount, drawbar retention spring with tensioner * Truck coupling height from approx. 775 mm to approx. 975 mm * Drawbar length approx. 1,800 mm Support system: * 2 hydraulic rear supports – individually operated, control system housed in a separate stainless steel box Axles: * SAF air suspension low-bed axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Hodpfxoy Auhns Ahzjnl Wheels: * 16 tyres 245/70 R 17.5, 146/146F, make: Conti HTR2 (tyre load capacity approx. 12 t/axle) Brake system/suspension: * Brake system according to ECE directive R13 dual-line pneumatic brake system * Wabco EBS system 4S3M, 1st and 3rd axle sensor-controlled * RSS/RSP – stability program * Spring-loaded parking brake on 3rd and 4th axles * Aluminium air tanks for total weight 44 t * Brake/air hose couplings with 2 individual coupling heads yellow/red * EBS/ABS connection cable * Retaining rubber for EBS and electric connectors * Air suspension with lifting and lowering function, front and rear individually operable * Automatic adjustment to programmed ride height from 15 km/h Assistance/safety systems: * SWIT – Schwarzmüller Intelligent Telematics Floor: * Softwood flooring approx. 50 mm, impregnated,

Koşul: ikinci el, azami yük ağırlığı: 26.827 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2025, bir sonraki muayene (TÜV): 04/2026, yükleme alanı uzunluğu: 16.240 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2025, Donanım: ABS, Kässbohrer KSLA RJ Mega Jumbo Low Loader with Wheel Wells and Excavator Trough Hardly Used Immediately Available Including Winch TECHNICAL DATA: * Fifth wheel height (H5): approx. 950 mm * Swing door rear: 2,300 mm * External length (L): 13,190 mm * Gooseneck length (Gl): 3,950 mm * Platform length (Pl): 9,240 mm * Extension (Pe): 3,500 mm * Locking position: 500 mm * Platform height (Ph): 770 mm * Wheelbase (Wb): 7,800 mm * Axle spacing (A): 2,260 mm * Axle load: 24,000 kg * Axles: 12 t technical capacity (10 t permissible load) BPW * Axles with drum brakes * Axle load: 8 t capacity * Kingpin capacity: approx. 15,000 kg * Unladen weight ±%3: 12,173 kg * Overall width (W): 2,550 mm + 600 mm (with side extensions) * Sliding platform: Not included * Gross weight (80 km/h): 39,000 kg * Gross weight (60 km/h): 42,900 kg RUNNING GEAR: * Number of axles: 3 * Steering type: 2 rigid front axles, 1 trailing axle rear * Lift axle: Load-dependent manual axle lift on 1st axle * Lift axle control: Manual * Wabco braking system * Tyres: 12 x 205/65 R17.5 * 1 x spare wheel carrier on the front wall * Air suspension, 1 x load gauge included to display axle aggregate pressure * NATO socket CHASSIS: * S700 MC * Gooseneck with 90° vertical corners * 45 mm hardwood floor and steel floor with embossed pattern above wheels only * Galvanized outriggers 8 x 2 to increase platform width by up to 300 mm * Jost supports 50 t * Folding rear supports 45 t * 2 pairs of wheel recesses for transporting vehicles with tyres * Wheel trough bridge to cover wheel recesses RAMP: * Ramp load capacity: approx. 40 t * Suitable for hydraulic folding and shifting operations * Wooden deck, 40 mm thick, 3,070 mm long, 850 mm wide, 3,715 mm high (closed position), ramp angle 14°, capacity 40 t * Rear ramp safety: ramp protection tension chain included LOAD SECURING: * Lashing rings: 2 x 2 x 5000 daN load capacity, 1 x 2 x 10000 daN lashing rings on gooseneck, 3 x 2 x 5000 daN, 4 x 2 x 10000 daN lashing rings on outer platform, 2 x 2 lashing rings with 8000 daN capacity under outer frame, 4 x 2 lashing rings with 6000 daN capacity in well area included * Stake pockets: 5 x 2 stake pockets (52 mm x 102 mm) * 6 container lock housings and 4 twistlock container locks for the transport of 1 x 20 FT or 1 x 30 FT containers * Gooseneck panels: 1 x steel front wall panel (450 mm x 2,550 mm), 2 x aluminium side walls (360 mm x 1,500 mm), 1 x aluminium rear wall (360 mm x 2,550 mm) * Plug-in stakes: 8 x 2 pcs 50 mm x 100 mm ACCESSORIES: * 1 x PVC-coated steel toolbox (single lid) 750 x 400 x 360 mm (H x D x W) * 1 x beacon * 1 x work light on underride guard * Oversize signs with LED lighting 2 x 2 pcs, 423 mm x 423 mm * Storage box on gooseneck (600 mm x 830 mm x 2,310 mm) * Wooden planks for wide load transports * Chassis color: RAL 3020 Traffic red Hnodpfxexy Ddks Ahzsl For further information, we are at your disposal.

Koşul: yeni, boş ağırlık: 4.300 kg, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.100 mm, yükleme alanı genişliği: 2.480 mm, süspansiyon: hava, lastik boyutu: 275/70R22,5, Donanım: ABS, | Schwarzmüller Jumbo construction materials trailer | BPW axles with disc brakes | Pallet box, 2x stainless steel toolboxes | Rear storage compartment 600x400x2,900 mm | Drop side height 1.00 m, front wall height 1.40 m | Loading dimensions: 7.10 m x 2.48 m | XLite aluminium rims | Tyres: 275/70R22.5 twin tires | Plastic tarpaulin cover with rubber straps | Aluminium storage tray and front access step | Subject to errors, input mistakes, and prior sale. Hnsdpfjtuwbpox Ahzel

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, New 750 kg Car Trailer – Low Loader, Top Quality For sale is a brand-new 750 kg car trailer, perfect for a wide range of applications in both private and commercial sectors (transport, construction, gardening, etc.). 🔧 Technical Specifications: Type: Low loader Gross vehicle weight: 750 kg Payload: approx. 630 kg Axles: 1 Braked: No Tyres: 13 inch Internal dimensions (LxWxH): approx. 202 x 114 x 30 cm ✅ Features & Equipment: - Sturdy, fully galvanized steel construction (corrosion-resistant) - Robust frame design with reinforced drawbar - Rubber suspension axle for smooth driving characteristics - Drop sides made of durable steel – long-lasting and robust Hjdpfx Ahoy Dru Iszonl - Lashing eyes for secure load fastening - Installation for tarpaulin / bows available - Protected lighting system 👍 Advantages: - Brand new product (not used) - Low maintenance and long service life - Compact dimensions – suitable for smaller vehicles - Versatile usage (furniture, building materials, green waste, etc.) 📦 Availability: - Delivery available - Ready for dispatch within a few weeks 📍 Collection & Delivery: - Collection in Buchholz (Aller) possible - Nationwide delivery within Germany upon request 💰 Note: The listed price includes the standard base trailer. Accessories and additional features (e.g., body structures, extensions, etc.) are available separately on request. Your Globaltainer GmbH Team

Koşul: ikinci el, boş ağırlık: 5.100 kg, azami yük ağırlığı: 12.900 kg, ilk tescil: 03/2014, bir sonraki muayene (TÜV): 04/2025, toplam uzunluk: -1 mm, toplam genişlik: 25.500 mm, süspansiyon: çelik-hava, lastik boyutu: 245 / 70 R 17.5 / 8mm, ön lastik ölçüsü: 245 / 70 R 17.5 / 8mm, işletme ağırlığı: 18.000 kg,

Koşul: ikinci el, boş ağırlık: 6.090 kg, azami yük ağırlığı: 23.910 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2017, bir sonraki muayene (TÜV): 06/2026, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 940 mm, süspansiyon: hava, lastik boyutu: 245/70R17.5, renk: sarı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Araç konumu: yolda / sevk halinde, 3 aks, SAF akslar, döner tabla, yaprak yay süspansiyonu, ABS (Anti Blokaj Sistemi), bağlama halkaları, mekanik rampalar, arka destekler, yan alüminyum yan koruma, çift tekerlekli lastikler. Hedpfey N D Ecex Ahzjnl Üst yapı: Mekanik rampalı 3 akslı alçak şasi dorse. Rampa uzunluğu 2.800 mm, arka eğim yaklaşık 1.000 mm. 3x10t SAF aks, kampanalı frenler, 50 mm çeki halkası. Tüm bilgiler kesinlik taşımamaktadır, araç sevk halindedir! Aksesuar bilgileri teminatsız olup, değişiklik, ara satış ve hatalar saklıdır!

Koşul: ikinci el, azami yük ağırlığı: 30.250 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2014, bir sonraki muayene (TÜV): 06/2025, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.480 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2014, Donanım: ABS, Schwarzmüller flatbed semi-trailer with lift axle Permissible total weight: 36,000 kg Unladen weight: 5,750 kg Payload: 30,250 kg Equipped with SAF axles First axle is a lift axle Air suspension Disc brakes Side and rear underrun protection (right, left, and rear) 2 storage boxes on the right side 1 storage box on the left side Rear rubber impact buffers 2 extendable oversize load signs at the front 2 extendable oversize load signs at the rear 2 landing gears operable from the right EBS (Electronic Braking System) ABS (Anti-lock Braking System) Perforated outer frame with hole spacing approx. 100 mm Wheelbase: approx. 6,350 + 1,310 + 1,310 mm External dimensions (LxW): approx. 13,840 x 2,550 mm Loading area (LxW): approx. 13,620 x 2,480 mm Front wall height: approx. 2,400 mm Loading height: approx. 1,250 mm Tires: 385/65R22.5 Tread depth left front: 4 mm Tread depth left middle: 16 mm Tread depth left rear: 8 mm Tread depth right front: 5 mm Tread depth right middle: 15 mm Hsdowqyrhspfx Ahzsnl Tread depth right rear: 10 mm Additional equipment: Strengthened steel frame welded construction for point load 20 t over 4 m focused at frame center for ASH unladen: 1,090 – 1,190 mm with air-suspended tractor unit Replaceable 2” kingpin (EU standard mounting, diagonal 2,040 mm) Perforated outer frame with approx. 100 mm hole spacing, long slot 40/25 mm compliant with DIN EN 12640 Air suspension with lift/lower device (approx. +120/-80 mm) Automatic ride height adjustment from 15 km/h SAF "Intradisc-plus-Integral" air suspension unit with low-maintenance disc brakes, ø 430 mm, 3 x 9 t rigid axles, wheelbase 2 x 1,310 mm Front axle with automatic lifting function = dual-side lift (1 x 96307), automatically lifts and lowers depending on weight (when the lift axle is raised, loading or overall height increases by approx. 50 mm), also with forced lowering function including integrated speed-limited drive-off assistance for push button operation inside the cab (without button installation) 1 odometer = hubodometer (ECO-Meter) (kit no. 10801, with wheel cap kit no.: 52917) (on 2nd axle front right) Mechanical 2 x 12 t support winches, single-side operation and load equalizer Dual-line brake system EBS-E – electronic braking system (Wabco 2S2M = second axle sensor) RSS – rollover stability program Spring-actuated parking brake on 2 axles Unpainted aluminum air reservoirs 27 mm phenolic plywood floor flush with outer frame 2 steel hat profile rails above the longitudinal beams, additional 12 mm phenolic over-deck, chamfered to the outer frame Fixed aluminum hollow profile front wall 2,400 mm with 2 central supports

Koşul: ikinci el, azami yük ağırlığı: 17.640 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2015, bir sonraki muayene (TÜV): 04/2026, yükleme alanı uzunluğu: 8.355 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 3.600 mm, Üretim yılı: 2015, Donanım: ABS, Good condition Hjdpjy Dmuvsfx Ahzjnl

Koşul: ikinci el, toplam ağırlık: 34.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2008, süspansiyon: hava, lastik boyutu: 385/65 R22,5, Donanım: ABS, Schwarzmüller platform römork | BPW akslar, disk frenli | 2008 model | Stepne tutucu | Palet kutusu | Takım kutusu | Lastikler: 385/65 R22,5 | Hata, giriş hatası ve ön satış hakkı saklıdır. Hnjdpfx Ahoxx Nlwozsl

Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: VAVJS1339PH522406, boş ağırlık: 8.520 kg, azami yük ağırlığı: 30.480 kg, toplam ağırlık: 39.000 kg, ilk tescil: 01/2024, yükleme alanı uzunluğu: 13.500 mm, süspansiyon: hava, lastik boyutu: 385/55 R22.5, renk: sarı, Üretim yılı: 2024, Donanım: ABS, LOCATION: 73230 Kirchheim unter Teck - 3-AXLE BUILDING MATERIAL PLATFORM SEMI-TRAILER RH230 - forcibly steered Vehicle identification no.: VAVJS1339PH522406 Mileage: 7,700 km - Weights Gross weight (technical): 39 t Axle load (technical): 27 t Fifth wheel load (technical): 12 t Hjdpfxexq S H Io Ahzsnl DIMENSIONS Internal length approx. 13,500 mm Internal width approx. 2,480 mm Max. overall width 2,550 mm Loading height front approx. 230 mm above ASH = approx. 1,360 mm Fifth wheel height unladen approx. 1,130 mm CHASSIS - Welded steel frame construction - Reinforced for load capacity 20 t at center of gravity over 4 m loading length - Frame height at front approx. 230 mm - 2'' replaceable kingpin - Frame designed for unladen fifth wheel height approx. 1,120 mm - 1,200 mm for air-suspended tractor - Exterior frame with 4 mm perforated rail, hole spacing approx. 100 mm, oblong hole 50/30 mm, for lashing, 3.5 t per lashing point - 10 pairs of 5 t lashing rings, countersunk, foldable, also outward foldable - 8 pairs of insert tubes with plug-in socket for stanchions 80x80 mm, both sides on the outer frame - 6 insert tubes with plug-in socket for stanchions 80x80 mm, transversely over full width, max. traction force 2,000 daN AXLES - BPW EcoDisc axles with disc brakes ø430 mm (22.5'' disc) - Load capacity 9 t/axle, on-road version - 1st axle fixed - 2nd and 3rd axles with turntable mount for forced steering STEERING - "Tridec TR" forced steering for two turntable-steered axles, heavy-duty design - Self-acting forced steering, front saddle turntable with steering wedge - Actuated via two steering rods, rear axle on bogie mount - Central lubrication points for steering at front saddle turntable and rear bogie - Axle lift on first axle, raises and lowers automatically depending on weight, start-off assist with speed limit BRAKING SYSTEM / SUSPENSION - EBS system 2S2M, one axle with sensor - RSS/RSP - stability control program - Spring-actuated parking brake on 2 axles - Aluminium air tanks - Brake/air connections with Quattromatic quick couplings - EBS/ABS socket at the front - Air suspension with lift/lower function, total stroke approx. 200 mm - Automatic adjustment to programmed ride height from 15 km/h ASSISTANCE / SAFETY SYSTEMS - Axle load display via EBS CAN bus signal for in-cab display - Wabco SmartBoard for data reading via display (mileage, axle group load, brake diagnostics, etc.) FLOOR - 27 mm phenolic plywood flooring with steel hat-profile rails above longitudinal beams - Floor load capacity 7,200 kg forklift axle load ACCESSORIES / GENERAL - Aluminum forklift protection strip bolted both sides to outer frame - Rear crosswise aluminum forklift protection strip - Enclosed SPECIAL steel toolbox, make Schoch, black-coated, approx. 3,340 mm long, 2,480 mm wide, 500 mm high, load capacity approx. 1 t, asymmetrical with doors on both sides - Galvanized steel toolbox/ lid painted in solid color - 8 removable hardwood cross-beams approx. 100/100 mm, steel-edged, fixable in plug-in sockets on outer frame Very good condition, German registration certificates, immediately available.

Koşul: yeni, azami yük ağırlığı: 32.630 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.500 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.200 mm, yükleme alanı hacmi: 57 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.800 mm, Üretim yılı: 2026, Donanım: ABS, SCHWARZMÜLLER 3-Axle Grain Tipper Semi-Trailer 57m³ 6,370kg!! NEW VEHICLE!! Cargo type: Bulk material, pallet and grain transport Weights: GVW (technical): 39 t Axle load (technical): 27 t Kingpin load (technical): 12 t Unladen weight: 6,370 kg Dimensions: Hedoyv S Niepfx Ahzenl Internal length: approx. 10,500 mm Internal width: approx. 2,470 mm Internal height: approx. 2,200 mm Loading volume: approx. 57 m³ Overall height unladen: approx. 3,800 mm Chassis: Welded steel frame construction with rear tipping shaft, Low body height (frame height approx. 280 mm) 2" kingpin Frame designed for coupling height approx. 1,170 mm - approx. 1,250 mm Mechanical steel landing gears, 2 x 12 t, single-sided operation on the right side, load compensation Axles: SAF Intradisc-B9 axles with disc brakes Ø430 mm (22.5" disc), Load capacity 9 t/axle, on-road version Axle spacing: 1,310 + 1,310 mm Front axle liftable automatically = raises and lowers depending on load, additionally with forced lowering incl. integrated starting aid, controlled by button in cab and by pressing the brake pedal three times, socket: PIN 12 Wheels: 6 tyres 385/65 R 22.5, 160K 6x aluminium rims 11.75 x 22.5, offset 120 mm, polished, manufacturer as per factory selection Brake system / Suspension: Brake system according to European directive 71/320 ECE R13, dual-line air brake system Manufacturer: Knorr EBS system 2S2M RSS – stability programme Spring-actuated parking brake Aluminium air tanks Brake/air couplings: 2 coupling heads EBS/ABS socket at the front Electronic air suspension with automatic lowering device (inductive switch + lowering lock rotary switch), also with lift and lower function, operable from cab via CAN-bus signal and display (TIM) on trailer Assistance / Safety Systems: Axle load display via EBS CAN-bus signal, display in cab TIM – Trailer Information Module by Knorr, display on chassis SWIT – Schwarzmüller Intelligent Telematics, BASIC package Tyre pressure monitoring according to ECE regulation 141, with pressure sensors in the wheels Tipper body: Aluminium corner tipper body for pallet configuration = smooth inside and outside, Front and rear walls vertical Front wall 4 mm reinforced Access steps in the body Side walls made of 30/3/2 mm hollow profiles with upper stabilising frame Rear crossbeam = swing-out door stop beam incl. actuating rod Uniform fixed support over front wall and rear crossbeam Floor plate 8 mm with closely spaced cross ribs Side walls inside fully welded and sealed Combination rear wall 4 mm = double doors split in the middle with rubber seal, 1 external stainless steel rotary bolt lock and holder for open doors plus additional swinging frame with rubber seal, automatic-mechanical 4-hook central locking with locking option for chute unloading 1 grain chute approx. 400/400 mm per door leaf with side dosing lever and splash guard Chute plate stainless steel, unpainted Additional joint for free swinging action Tie rods, Hydraulics: 1-pipe system with screw coupling fixed half HDK BG6 High-pressure front ram for rear tipping, tipping angle approx. 48° Others: Plastic sliding tarp incl. aluminium bar, hand crank + bracket at platform Middle of tarp reinforced with sewn-in tube Ø 60 mm, with Keder fastening on top belt (without customs seal) 3 stop brackets and locking for rolled tarp Front and rear tarpaulin hooks with zigzag lacing 4 removable or swiveling center cross tubes

Koşul: ikinci el, boş ağırlık: 6.580 kg, azami yük ağırlığı: 27.420 kg, toplam ağırlık: 34.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2011, süspansiyon: hava, lastik boyutu: 385/65 R22,5, Donanım: ABS, Schwarzmüller platform dorse | BPW dingilleri, disk frenli | 2011 model | Stepne tutucu | Takım kutusu | Lastikler: 385/65 R22,5 | Hatalar ve ön satış hakkı saklıdır. Hsdpfxox Uqxms Ahzjnl

Koşul: ikinci el, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 12/2022, yükleme alanı uzunluğu: 12.400 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2022, Donanım: ABS, 4-axle low-bed semi-trailer with stepped platform Tractor unit data and equipment: 3-axle tractor unit Please check the saddle height under the section "Dimensions"! No modifications to the tractor unit Please note: 5,000 mm = maximum distance from front edge of the tractor unit to center of the fifth wheel 1,730 mm = minimum front clearance from center of the fifth wheel 2,230 mm = maximum rear swing radius Tractor unit suspension type: Air suspension Gross train weight (permissible) 40 t Gross weight (technical) 58 t Axle assembly load (technical) 40 t Fifth wheel load (technical) 18 t Front stepped platform: 3,500 mm Low-bed platform - level loading area: approx. 7,970 mm Rear ramp slope: approx. 730 mm Overall width: approx. 2,550 mm (with extensions approx. 3,000 mm) Loaded loading height: approx. 870 mm Unloaded loading height: approx. 900 mm With unloaded saddle height: approx. 1,250 mm When combining vehicles, ensure compliance with legally permissible overall height and total train length! Steel welded construction with a front, sloped frame cranking and beveled rear (without central excavator shovel recess) 5 pairs of pockets in the low-bed for tube stanchions 100 x 50 mm 4 pairs of lashing brackets in the outer frame 2 pairs of 5t lashing rings under the outer frame – between the axles 4 pairs of recessed 4t-floor lashings on the stepped platform 7 pairs of recessed, retractable 5t-floor lashings (10t technical pulling force) in the low-bed + 1 foldable pair between the 2nd and 3rd axle 1 pair of recessed, retractable 10t-floor lashings on the front platform slope 1 pair of recessed, foldable 10t-floor lashings on the inner longitudinal beam past the 2nd axle 1 pair of recessed, foldable 10t-floor lashings on the inner longitudinal beam past the front crank Interchangeable 2" kingpin 5 pairs of steel tubular side stakes 100x50x5 mm, usable height approx. 1,000 mm, hot-dip galvanized, securing with pressure actuation # Permissible stanchion load 1,000 kg/stanchion with application point 500 mm above ground Pull-out platform extensions on both sides of the low-bed with 50 mm softwood planks (the track width of the machines to be transported must not exceed the external frame width of 2,550 mm) Mechanical steel landing gears, 2 x 12 t, single-side operation right, automatic load equalization, manufacturer according to factory selection 2 pieces hydraulic supports at the rear - individually operable, control housed in its own stainless steel box AF air-suspended low-loader axles with drum brakes, load capacity 11 t/axle, S-cam brake 300/200 mm, automatic brake adjusters Axle spacing 1,310 + 1,310 + 1,310 mm 3rd and 4th axle as spindle/pivot steered SAF trailing axles, approx. 20° steering angle, electro-pneumatic reverse lock automatically activated in reverse gear, in addition with a switch in the driver's cab and release valve on the trailer Starting aid on 1st axle = speed-limited pressure relief, can be unloaded when loaded, push button operation in cab Mechanical odometer, mounted on 2nd axle, right-hand side in direction of travel 16 x tires 245/70 R 17.5, 146/146F (tire load capacity 12 t / axle) 16 x steel rims 6.75 x 17.5, with offset, silver (tire load capacity 12 t/axle) 1 x tire 245/70 R 17.5, 146/146F, brand Conti HTR2 (tire load capacity 12 t/axle) 1 x steel rim 6.75 x 17.5, with offset, silver Hnjdpsu Uzv Eofx Ahzjl Tread depth: 10-11 mm WIT - Schwarzmüller Intelligent Telematics, service package "LOCAL TRAC" ... further details on

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 146 kg, azami yük ağırlığı: 604 kg, toplam ağırlık: 750 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 2.640 mm, yükleme alanı genişliği: 1.260 mm, yükleme alanı yüksekliği: 300 mm, Üretim yılı: 2026, Scope of delivery: 1x Martz car trailer 264x126cm with tipping drawbar and jockey wheel, 750kg Description: The trailer features a V-type tipping drawbar, ensuring perfect stability while driving. The chassis is constructed from bent, galvanized steel profiles bolted together. The running gear is based on a torsion axle from a renowned manufacturer—independent suspension on a torsion shaft. The tyres used are 155/70 R13. The side panels are made from galvanized steel sheet. The rear of the trailer can be opened quickly and effortlessly. Transport platform: made of high-quality, waterproof, anti-slip phenolic plywood, 9mm thick. Technical data: - Tipping drawbar - Jockey wheel Gross weight: 750kg Unladen weight: 146kg Payload: 604kg Platform length: 2640mm Platform width: 1260mm Overall width: 1690mm Overall length: 3540mm Overall height: 800mm Side panel height: 300mm Side panel material: galvanized steel Manufacturer: Martz Trailer type: box trailer Suspension type: rubber torsion axle Drawbar type: V drawbar Floor: phenolic plywood (9mm thick) Tyres: 155/70 R13 Frame type: bolted Frame material: steel Applications: gardening, domestic use, relocations/furniture transport, goods transport, and more. The Martz car trailer is the reliable choice for all your transport needs. If you choose 'self-collection', we can send you the vehicle documents in advance, free of charge! Hedpfx Aexpimpjhzjnl

Koşul: ikinci el, azami yük ağırlığı: 23.360 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2008, Üretim yılı: 2008, Donanım: ABS, Katlanabilir çift rampa, hidrolik, genişletilebilir Hnjdpfx Ahox Sb D Iszsl Durum: Pas lekeleri, genel olarak iyi

Koşul: ikinci el, azami yük ağırlığı: 14.100 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2015, Üretim yılı: 2015, Donanım: ABS, Jumbo Schwarzmüller römork, platform kasa ve yan paneller Hnsdpfx Ahjx Sbwzozel

Koşul: ikinci el, azami yük ağırlığı: 30.380 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2011, Donanım: ABS, Vehicle ID no.: VAVX99448BH301318 Includes ALU ramps – 2,800 mm long, 400 mm wide Unladen weight: 9,620 kg DE MOT due Neck length: 4,000 mm Low-bed dimensions: Length: 8,620 mm – Width: 2,550 mm – Loading height: 930 mm Detachable rails Hodpfx Ahjtt U D Dszonl Support stands Width extension lighting Front fifth-wheel load: max. 12,000 kg Swing radius front: 2,100 mm – rear: 1,900 mm Technical axle loads: 4 x 7,000 kg BPW Eco Plus axles with drum brakes Axle 1 = liftable Axles 3 & 4 = self-steering 2 x toolboxes Tyres: 245/70 R 17.5 Modifications, prior sale, and errors excepted. This description is for general vehicle identification only and does not constitute a warranty in the legal sense. The specification in the purchase contract is decisive. Our offer does not generally include a new technical inspection (TÜV). If a new TÜV inspection is required, we will gladly provide an offer from our partner workshops! The vehicle may be stickered/lettered for advertising purposes. Our general terms and conditions of delivery and payment apply.

Koşul: yeni, azami yük ağırlığı: 33.440 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.000 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 2.900 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.900 mm, Donanım: ABS, SCHWARZMÜLLER 3-AXLE STAKE SEMI-TRAILER NEW VEHICLE IMMEDIATELY AVAILABLE!! Tractor Unit Data and Equipment 4,500 mm maximum distance from tractor unit front edge to kingpin center 2,240 mm minimum free front clearance from kingpin center 1,900 mm maximum rear turning radius Gross train weight (permissible) 44 t for forward and backward running operations or with special permit Gross weight (technical) 39 t Axle aggregate load (technical) 27 t Kingpin load (technical) 12 t Dimensions Frame length approx. 13,000 mm Overall width max. 2,550 mm Loading height front + rear approx. 1,340 mm Trailer in horizontal position at approx. 1,150 mm Loading height approx. 1,510 mm Welded steel frame construction Lightweight frame made of high-strength fine-grained steel Straight frame design, all stake holders mounted on frame Frame height front approx. 190 mm (without stake holders) Interchangeable 2" kingpin Frame designed for unladen fifth wheel height approx. 1,150 mm - approx. 1,250 mm with air-suspended tractor unit Hnjdpfx Ahsn Hrg Rezol 12 mm phenolic plywood covering between longitudinal beams, bolted, extended forwards to approx. landing gear (to protect the tractor unit) and rear above running gear, flush with top edge of longitudinal beams Landing gear, 2 x 12 t, one-sided operation right, thrust equalization, Reinforced cross-brace for loading/unloading when the trailer is uncoupled 3x SAF Intradisc Plus Integral axles with disc brakes ø430 mm (22.5" disc), Load capacity 9 t/axle, reinforced axle bodies, off-road version Axle spacing 1,310 + 1,410 mm Axle lift on 1st axle, lifts and lowers automatically depending on weight, with forced lowering and speed-limited start-up aid for push-button operation in cab and operation via "3 x brakes" 6 x 385/65 R 22.5, 164K steel rims 11.75 x 22.5, ET120 mm, silver Brake system compliant with EC directives 71/320 and ECE R13 Two-line compressed air braking system as selected by manufacturer EBS system 2S2M, one axle sensed RSS – stability program Spring-loaded parking brake on 2 axles Aluminium air reservoir Brake/air line connectors with 2 single coupling heads yellow/red EBS/ABS socket front Air suspension with lift/lowering device Automatic setting to programmed ride height from 15 km/h Bellows diameter 360 mm SWIT – Schwarzmüller Intelligent Telematics, “LOCAL TRAC” performance package Axle load display via EBS CAN bus signal for display in the cab monitor Extra strong front bulkhead, steel profile approx. 2,500 mm high, with 2 stable central supports, Top corners chamfered approx. 300mm/45° Stake holders mounted/displaceable, layout: approx. 600 mm, then every 2,400 mm 6 Exte stake holders 144, with bolted clamp attachment Stake inclination approx. 0.8° inwards (also suitable for sawn timber transport) 6 pairs of Exte stakes 144-S with bolt attachment, 2-piece telescopic stakes, max. load per stake pair 7 t, coated in original signal color orange Telescopic key for stake operation Stake load height = max. approx. 2,800 mm 8 gripper deflector plates approx. 200 mm long, between stake holders, sides 6 pairs of lashing hooks on stake holders 24-volt lighting system compliant with EC Directive 76/756/EEC 2 "Aspöck" FULL-LED five-chamber tail lights with integrated control unit 2 LED position lights front 2 LED outline marker lights rear Flashing LED side marker lights, triggered by turn signal 2 license plate lights 2 x 7-pin sockets (1x DIN ISO 3731 and 1x DIN IS

Koşul: ikinci el, azami yük ağırlığı: 33.780 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2019, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Donanım: ABS, Schwarzmüller tomruk yarı römorku, şasi ve dikmeler ile * BPW akslar, havalı süspansiyon ve disk frenler * 1. aks kaldırılabilir * Yedek tekerlek tutucu * Lastik ebatı 385/65R22,5 * Alüminyum jantlar * Çalışma lambası Hnodpoyld U Iefx Ahzsl * 2x saklama dolabı * Jost destek ayakları Daha fazla bilgi için size memnuniyetle yardımcı oluruz.

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: VAVYS1339RD526996, boş ağırlık: 5.910 kg, azami yük ağırlığı: 30.090 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 4x2, ilk tescil: 07/2024, yükleme alanı uzunluğu: 13.000 mm, yükleme alanı genişliği: 2.500 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, renk: siyah, Üretim yılı: 2024, Donanım: ABS, our vehicle number #30370 3x SAF axles Tyre size: 385/65 R 22.5 Perm. total weight: 36,000 kg Payload: 30,090 kg Hnjdpfswuq Ibex Ahzsl Unladen weight: 5,910 kg Body dimensions (internal): L: 13,000 mm W: 2,500 mm Colour: black Lifting axle Disc brakes 8 pairs of Eco stanchions 8 pairs of lashing rings Front wall height: 2,500 mm Air suspension SWIT - Schwarzmüller Intelligent Telematics Reinforced axles Side underrun protection Spare wheel holder Tool box Jost landing legs 5x towing hooks at the rear Floor plate LED rear lights ABS EBS Financing available on request!!!

Koşul: ikinci el, boş ağırlık: 6.560 kg, azami yük ağırlığı: 18.440 kg, toplam ağırlık: 25.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2017, yükleme alanı uzunluğu: 13.700 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 850 mm, dingil mesafesi: 7.500 mm, renk: mavi, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, basınçlı hava freni, ek farlar, * German semi-trailer * Very good visual condition, see photos * 2-axle low loader, Jumbo TO 152 DE * Loading area: length 13,700 mm x width 2,540 mm * Loading height approx. 850 mm * Stake pockets * Multilock * Wooden loading floor * Winch with cable remote control 15,000 lbs * Long aluminium ramps 3,000 x 400 mm, laterally adjustable * ROR axles * Air suspension * Haacon spindle supports * ABS + EBS * Work lights * Spare wheel * Toolbox * Drum brakes * Wheelbase 7,500 mm + 1,250 mm * Perm. gross vehicle weight 27,200 kg * Unladen weight 6,560 kg * Payload up to 20,640 kg If you require a new roadworthiness inspection (TÜV), we are happy to provide an offer through our partner workshops. Hjdjxu Nnwepfx Ahzjnl Our offer is in general WITHOUT new TÜV inspection, WITHOUT new DGUV, WITHOUT new SP, WITHOUT new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and evaluation of the goods to avoid any misunderstanding regarding their condition and suitability for the buyer. Viewing and inspection are possible at any time by appointment and are expressly encouraged. All information provided without guarantee. We accept no liability for errors or incorrect details in this offer. The buyer is obliged to independently verify the condition and equipment of the items/vehicles. Subject to prior sale, errors, and changes.

Koşul: yeni, boş ağırlık: 3.600 kg, azami yük ağırlığı: 8.300 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.480 mm, süspansiyon: diğer, lastik boyutu: 205/65 R 17,5, dingil mesafesi: 990 mm, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 205/65 R 17,5, arka lastik boyutu: 205/65 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Çekme borusu yaklaşık 3.850 mm'ye kadar uzatılabilir, kilitleme yaklaşık 1.000 mm, 2.000 mm, 3.000 mm veya 3.850 mm'de yapılabilir. Yüklü yükseklik yaklaşık 830 mm. Araç iç genişliği yaklaşık 2.530 mm. Orta kısımda 4 adet takmalı dikme için 100 x 50 mm yuva. Dış şaside 8 adet dikme yuvası. Her biri 5,3 ton kapasiteli 4 adet bağlama halkası. Dış şasi çemberinde bağlama gözleri bulunur. 4 adet aydınlatmalı uyarı tabelası. Arkada takılabilir döner uyarı lambası. Kontur işaretlemesi ve yan koruma. Arkada çamurluk ve su buharı bastırıcı. -- Baskı hataları, yanlışlıklar ve değişiklik hakkı saklıdır, örnek görseller --. Detaylı bilgi için: !, Daha fazla ayrıntı: ! Hnsdsy Sn Dujpfx Ahzsl