Alçak şasi dorse

SCHWARZMÜLLER RH240 Jumbo Plateau Tieflader ausziehbar > NEU <

Durumu: kullanılmış, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 12/2022, yükleme alanı uzunluğu: 12.400 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2022, Donanım: ABS, 4-axle low-bed semi-trailer with stepped platform Tractor unit data and equipment: 3-axle tractor unit Please check the saddle height under the section "Dimensions"! No modifications to the tractor unit Please note: 5,000 mm = maximum distance from front edge of the tractor unit to center of the fifth wheel 1,730 mm = minimum front clearance from center of the fifth wheel 2,230 mm = maximum rear swing radius Tractor unit suspension type: Air suspension Gross train weight (permissible) 40 t Gross weight (technical) 58 t Axle assembly load (technical) 40 t Fifth wheel load (technical) 18 t Front stepped platform: 3,500 mm Low-bed platform - level loading area: approx. 7,970 mm Rear ramp slope: approx. 730 mm Overall width: approx. 2,550 mm (with extensions approx. 3,000 mm) Loaded loading height: approx. 870 mm Unloaded loading height: approx. 900 mm With unloaded saddle height: approx. 1,250 mm When combining vehicles, ensure compliance with legally permissible overall height and total train length! Steel welded construction with a front, sloped frame cranking and beveled rear (without central excavator shovel recess) 5 pairs of pockets in the low-bed for tube stanchions 100 x 50 mm 4 pairs of lashing brackets in the outer frame 2 pairs of 5t lashing rings under the outer frame – between the axles 4 pairs of recessed 4t-floor lashings on the stepped platform 7 pairs of recessed, retractable 5t-floor lashings (10t technical pulling force) in the low-bed + 1 foldable pair between the 2nd and 3rd axle 1 pair of recessed, retractable 10t-floor lashings on the front platform slope 1 pair of recessed, foldable 10t-floor lashings on the inner longitudinal beam past the 2nd axle 1 pair of recessed, foldable 10t-floor lashings on the inner longitudinal beam past the front crank Interchangeable 2" kingpin 5 pairs of steel tubular side stakes 100x50x5 mm, usable height approx. 1,000 mm, hot-dip galvanized, securing with pressure actuation # Permissible stanchion load 1,000 kg/stanchion with application point 500 mm above ground Pull-out platform extensions on both sides of the low-bed with 50 mm softwood planks (the track width of the machines to be transported must not exceed the external frame width of 2,550 mm) Mechanical steel landing gears, 2 x 12 t, single-side operation right, automatic load equalization, manufacturer according to factory selection 2 pieces hydraulic supports at the rear - individually operable, control housed in its own stainless steel box AF air-suspended low-loader axles with drum brakes, load capacity 11 t/axle, S-cam brake 300/200 mm, automatic brake adjusters Axle spacing 1,310 + 1,310 + 1,310 mm 3rd and 4th axle as spindle/pivot steered SAF trailing axles, approx. 20° steering angle, electro-pneumatic reverse lock automatically activated in reverse gear, in addition with a switch in the driver's cab and release valve on the trailer Starting aid on 1st axle = speed-limited pressure relief, can be unloaded when loaded, push button operation in cab Mechanical odometer, mounted on 2nd axle, right-hand side in direction of travel 16 x tires 245/70 R 17.5, 146/146F (tire load capacity 12 t / axle) 16 x steel rims 6.75 x 17.5, with offset, silver (tire load capacity 12 t/axle) 1 x tire 245/70 R 17.5, 146/146F, brand Conti HTR2 (tire load capacity 12 t/axle) Rbsdpfxju Uzv Ee Ad Tow 1 x steel rim 6.75 x 17.5, with offset, silver Tread depth: 10-11 mm WIT - Schwarzmüller Intelligent Telematics, service package "LOCAL TRAC" ... further details on

Durumu: kullanılmış, azami yük ağırlığı: 25.660 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2022, Üretim yılı: 2022, Donanım: ABS, Schwarzmüller RH240 Jumbo Flatbed Semi-Trailer Low Loader telescopically extendable – for building materials and construction machinery transport – As-new condition – GVWR: 36,000 kg Unladen weight: 10,340 kg Internal length approx. 13,570 mm = Front platform length approx. 3,950 mm Rear platform length approx. 9,620 mm Platform width at lower deck approx. 2,540 mm Loading height in lowbed unloaded approx. 830 mm Frame: Extendable central frame welded construction Extension length 6,000 mm Pneumatically lockable, operated from the trailer + extra position for 40ft container in lowbed Reinforced version for construction material transport, rated for 20 t over 5 m at the center of gravity, and for construction machinery transport up to 20 t Frame suitable for transporting timber components L/W/H approx. 13,000/575/3,200 mm Reinforced frame for point loads front and rear at bearing blocks Reinforced outer frame in gooseneck area, 6 mm Reinforced outer frame in lowbed area, 6 mm Tapered cross beams Adjustable intermediate platform approx. 300 mm (non-removable), mechanically lockable, designed as stake pocket crossmember for 80x80 mm section stakes, plus 1 pair of 5 t lashing rings integrated on the outside of the intermediate platform Frame suitable for 2-axle tractor units and coupling height unladen approx. 960 mm – 1,020 mm with air-suspension tractor unit Front: 3 pairs and rear: 10 pairs of 10 t lashing rings, retractable into outer frame, both sides, also folding outwards for oversize load securing 10 pairs of lashing mushrooms with welded round steel on lower outer frame Frame attachments: 10 pairs of plug-in sockets with reinforcing beams for 80x80 mm section stakes, on both sides of the outer frame 6 stake pocket crossmembers for 80x80 mm section stakes 24 steel box section side stakes 80x80x5 mm, usable height approx. 2,000 mm, with lashing holes at the top for tensioning straps, hot-dip galvanized 3 pairs of container locks recessed in the lowbed platform for: 1x 20ft container 1x 30ft container 1x 40ft container (when extended) U-profile ramp guide at frame end Support equipment: Mechanical steel support winches, 2 x 12 t 2 fall supports, both sides at rear of frame Wheels: Tyres 205/65 R 17.5 Steel rims 6.00 x 17.5 Axles: SAF low loader axles with drum brakes Axle lift on 1st axle Axle spacing 1,310 + 1,410 mm Friction-steered SAF trailing axle, approx. 20° steering angle, electro-pneumatic reverse lock automatically activated when reversing Last axle is trailing and steered Brake system/Suspension: Brake system by Wabco Rodju A Nhnepfx Ad Tjbw Brake/air connections with 2 single couplings (yellow/red), EBS/ABS socket at front Air suspension with lift and lower function, total travel approx. 200 mm Automatic adjustment to programmed ride height at speeds from 15 km/h Assistance/Safety systems: Standard transmission interval: every 15 minutes with ignition on every 24 hours with ignition off Axle load indicator via EBS CAN bus signal for display in the driver’s cab (truck must be pre-equipped) Wabco SmartBoard for data readout via display (mileage, axle module load, brake diagnostics, etc.) Floor: 35 mm larch wood floor, impregnated on both sides, longitudinally installed with small expansion gaps, above the wheels covered with steel tread plate Front wall: Fixed profiled steel front wall, approx. 2,700 mm high with 2 center supports 2 front corner posts integrated into the front wall, bolted at the front end 2 lashing eye