Alçak şasi dorse

SCHWARZMÜLLER *F-Serie*Tieflader*gekröpft*pen

4-axle low-bed semi-trailer with stepped platform

Tractor unit data and equipment:
3-axle tractor unit
Please check the saddle height under the section "Dimensions"!
No modifications to the tractor unit
Please note:
5,000 mm = maximum distance from front edge of the tractor unit to center of the fifth wheel
1,730 mm = minimum front clearance from center of the fifth wheel
2,230 mm = maximum rear swing radius
Tractor unit suspension type: Air suspension

Gross train weight (permissible) 40 t
Gross weight (technical) 58 t
Axle assembly load (technical) 40 t
Fifth wheel load (technical) 18 t
Front stepped platform: 3,500 mm
Low-bed platform - level loading area: approx. 7,970 mm
Rear ramp slope: approx. 730 mm
Overall width: approx. 2,550 mm (with extensions approx. 3,000 mm)
Loaded loading height: approx. 870 mm
Unloaded loading height: approx. 900 mm
Nedpfju Uzv Eex Ad Hjkw
With unloaded saddle height: approx. 1,250 mm
When combining vehicles, ensure compliance with legally permissible overall height and total train length!
Steel welded construction with a front, sloped frame cranking and beveled rear (without central excavator shovel recess)
5 pairs of pockets in the low-bed for tube stanchions 100 x 50 mm
4 pairs of lashing brackets in the outer frame
2 pairs of 5t lashing rings under the outer frame – between the axles
4 pairs of recessed 4t-floor lashings on the stepped platform
7 pairs of recessed, retractable 5t-floor lashings (10t technical pulling force) in the low-bed + 1 foldable pair between the 2nd and 3rd axle
1 pair of recessed, retractable 10t-floor lashings on the front platform slope
1 pair of recessed, foldable 10t-floor lashings on the inner longitudinal beam past the 2nd axle
1 pair of recessed, foldable 10t-floor lashings on the inner longitudinal beam past the front crank
Interchangeable 2" kingpin
5 pairs of steel tubular side stakes 100x50x5 mm, usable height approx. 1,000 mm, hot-dip galvanized, securing with pressure actuation
# Permissible stanchion load 1,000 kg/stanchion with application point 500 mm above ground
Pull-out platform extensions on both sides of the low-bed with 50 mm softwood planks (the track width of the machines to be transported must not exceed the external frame width of 2,550 mm)
Mechanical steel landing gears, 2 x 12 t, single-side operation right, automatic load equalization, manufacturer according to factory selection
2 pieces hydraulic supports at the rear - individually operable, control housed in its own stainless steel box
AF air-suspended low-loader axles with drum brakes, load capacity 11 t/axle, S-cam brake 300/200 mm, automatic brake adjusters
Axle spacing 1,310 + 1,310 + 1,310 mm
3rd and 4th axle as spindle/pivot steered SAF trailing axles, approx. 20° steering angle, electro-pneumatic reverse lock automatically activated in reverse gear, in addition with a switch in the driver's cab and release valve on the trailer
Starting aid on 1st axle = speed-limited pressure relief, can be unloaded when loaded, push button operation in cab
Mechanical odometer, mounted on 2nd axle, right-hand side in direction of travel
16 x tires 245/70 R 17.5, 146/146F (tire load capacity 12 t / axle)
16 x steel rims 6.75 x 17.5, with offset, silver (tire load capacity 12 t/axle)
1 x tire 245/70 R 17.5, 146/146F, brand Conti HTR2 (tire load capacity 12 t/axle)
1 x steel rim 6.75 x 17.5, with offset, silver

Tread depth: 10-11 mm

WIT - Schwarzmüller Intelligent Telematics, service package "LOCAL TRAC"

... further details on

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.