Çalışma platformlu yarı römork

ES-GE 3-Achs Sattelanhänger - Rungen + CV

You can find our complete stock of vehicles, including those available immediately or at short notice, on our website.

Excerpt from the equipment list. Full equipment details available on request.

Chassis:
* Welded construction made from high-quality steel profiles with punched-through cross members, designed for high point loads
* Underride protection nose, approx. 700 mm wide
* Outer frame as UNP profile
* Wear plate approx. 8 mm
* Neck height at front approx. 130 mm

Coupling Device:
* 2" kingpin

Rear Underride Guard:
* Bolted version, compliant with EU regulations

Side Underrun Protection:
* EU-compliant, made of anodised aluminium profiles

Landing Legs:
* 2 x 12 t landing legs with compensating foot and single-side operation, positioned front right

Axles:
* 3 x 9 t air suspension axle assemblies
* 22.5" disc brakes
* Total lift approx. 180 mm
* Lifting and lowering device via rotary slide valve

Braking System:
* Dual-circuit compressed air braking system according to EU regulations with EBS and RSS, automatic load-dependent control
* Spring-loaded cylinders as parking brake
Cedpsugqvfofx Afgjhc
* Reversal-proof coupling heads permanently mounted on the front crossmember, without connection line to the tractor unit

Tyres:
* 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120
* Manufacturer of our choice
* Tyre pressure monitoring (TPMS) via EBS CAN bus system

Mudguards:
* EU-compliant

Spare Wheel Holder:
* Not included

Load Securing:
* 9 pairs of folding lashing rings, evenly spaced, traction approx. 5.0 t
* 9 pairs of folding lashing rings, evenly spaced, traction approx. 2.0 t
* In the outer frame, holes approx. every 400-600 mm for attaching tie-down straps

Front Wall:
* Reinforced steel construction, fixed, approx. 1,400 mm high
* Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high)

Floor:
* Approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanised omega steel profiles

Lighting System:
* EU-compliant, 24 volt, with multi-chamber lights
* LED side marker lights
* LED position lights front white
* LED outline marker lights rear
* Number plate lights
* Lane assist LED lights
* 1x 15-pin and 2x 7-pin connectors on front crossmember

Equipment:
* 2 chocks with holders
* ECE 70 warning plates
* Holder for rotating beacon incl. rotating beacon
* 2 rubber bump stops at rear
* Rear right access ladder, foldable and extendable (without platform)
* 1 open box made of perforated sheet metal, lateral to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, positioned behind the axles

Paintwork:
* Front wall: single colour RAL as desired
* Chassis: hot-dip galvanised
* Outer frame: hot-dip galvanised + single colour RAL as desired
* SSV: Aluminium anodised
* Underride protection: white (RAL 9016 traffic white)
* Attachments: galvanised/KTL black
* Rims: silver
* Contour marking: complete yellow

Including Special Equipment:
* First axle liftable, with fully automatic, load-dependent lift control
* 10 pairs of stanchion sockets in the outer frame, evenly distributed
* 4 rows of stanchion sockets across the load area
* 20 pieces of stanchions made from galvanised tube 80/50, total length approx. 1,200 mm
* Magazine inside front wall for 20 plug-in stanchions
* Container locks for 1 x 40' as well as 2 x 20' containers, flush at rear
* Container lock for 1 x 20' container central position
* Work spotlight on lamp bracket (activated by reverse gear)
* 2 stainless steel toolboxes, approx. 600x500x50

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.