Alçak yükleyici yarı römork

Faymonville MAX Trailer 3-Achs-Tele-Semi-Radmul.-ALU

For every used semi-trailer, you receive a current and comprehensive inspection and function report.

Gooseneck:
- Gooseneck with rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- Hardwood floor, 30 mm thick

Loading platform:
- Telescopic loading platform with rear slope approx. 1,000 mm x 8°
- 1 pair of fixed, built-in wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm
- Wheel recesses equipped with 15 x 15 mm square climbing bars as well as widenings on the lower section
- Between the 1st and 2nd axle, one pair of fixed, built-in wheel recesses, approx. 1,610 x 970 x 400 mm
- 3-piece removable galvanized covers over the wheel recesses (B 670 mm), max. point load 5 t / piece
- Recess in the slope and protruding into the platform for excavator stick approx. 2,900 x 750 x 210/290 mm
- 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN)
- 5 pairs of outward-folding lashing rings (LC 5,000 daN)
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN)
- Cutouts in the outer frame of the loading platform for attaching tie-down straps (LC 2,000 daN)

One-piece aluminium ramps:
- One pair of one-piece ALU ramps, approx. 2,500 x 600 mm
- Ramps with spring assist and manually adjustable
- Maximum load per pair: 24,000 kg

Axles and tires:
- BPW axles and suspension; 2 fixed axles, 1 self-steering
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock, activated via reverse gear and manually
- Air suspension with lift and lower valve
- Axle tool kit
- Tires: 235/75 R 17.5
- TPMS tire pressure monitoring system according to ECE R 141

Accessories included:
- One spare wheel with holder in front of the front wall
- 2" kingpin
- One galvanized steel front wall, approx. 400 mm high
- Yellow-red air couplings on the galvanized connection rail at the front
Hedpfjvu T Urjx Aacsfn
- 4 wheel chocks
- Mount at the rear of the gooseneck for aluminium drive-on ramps
- Galvanized, extendable widening sections by approx. 230 mm per side
- Galvanized folding supports under the slope of the loading platform
- Mount for a rotating beacon at the rear of the trailer
- White reflective tape on the sides, on the extension, and red at the rear, in compliance with EU regulations
- Mounts for warning boards on the gooseneck and rear left/right, including socket
- Removable ALU side and rear panels on the gooseneck, approx. 2,440 x 400 mm
- Rear galvanized stakes are removable (body length approx. 2,560 mm)
- 2 pairs of WADER container pockets in the loading platform for a 20ft or 30ft container
- 3 pairs of stake pockets for insertable stanchions 100 x 50 mm in the outer frame of the loading platform
- One removable galvanized intermediate table with 1 pair of WADER container pockets
- 20 x 20 mm square climbing bars every 200 mm on the outer frame of the platform slope
- Non-slip sand coating painted on the checker plates on the gooseneck and loading platform
- Four warning boards, extendable by approx. 400 mm (approx. 423 x 423 mm) with position lights
- Mounts for rotating beacon on the warning boards
- Load gauge for determining axle loads, including load chart
- HRM metallization (High Resistance Metallization) of the outer frame
- Complete steel structure shot-blasted, then all defined visible surfaces finished with ZINACOR 850 metallization (zinc 85% – aluminum 15%) hot-treated

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.