Tank

Van Hool Chemical tank inox 30 m3 / 3 comp

Durumu: kullanılmış, makine/araç numarası: 62429, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/1998, toplam uzunluk: 11.600 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 3.600 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: diğer, Üretim yılı: 1998, Donanım: ABS, Tank Capacity (litres): 30,000 Number of compartments: 1 Compartment capacity (litres): 30,000 Material code: 1.4301 Tank material: Stainless steel (Inox) Insulated: ✓ Test pressure: 4 bar Maximum working pressure: 3 bar Suitable for chemicals: ✓ = Further information = Iodpfewb Dbhsx Aggjik Axle configuration Tyre size: 385/65 R22.5 Axle brand: BPW Eco Brakes: drum brakes Suspension: air suspension Rear axle 1: tyre tread left: 10%; tyre tread right: 10% Rear axle 2: tyre tread left: 10%; tyre tread right: 10% Rear axle 3: tyre tread left: 10%; tyre tread right: 10% Weights Unladen weight: 7,360 kg Payload: 30,640 kg Gross vehicle weight (GVW): 38,000 kg Identification Registration: URX665 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durumu: yeni, boş ağırlık: 22.700 kg, azami yük ağırlığı: 79.300 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 11.000 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 920 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 22.700 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading deck length, approximately 3,750 mm long, with rear tapering of about 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6x4 and 8x4 Loading Platform: - Extendable loading platform, length approx. 11,000 mm with rear taper approx. 500 mm x 10° - A recess in the platform and into the taper for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking bolt and reinforced locking positions; supply lines are protected in the extendable beams and automatically adapt to the respective platform length Ramps: - One pair of two-part steel ramps, approx. 4,650 mm long and approx. 900 mm wide - Hydraulically folding ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outwards and approx. 215 mm inwards - "Super Grip" rubber flooring 25 mm and approx. 5 mm steel flooring as additional reinforcement on the tapered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension and Tyres: - PA-X axle system, all axles forced steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the platform length both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pilot pin for securing in raised position - 245/70 R 17.5 3PMSF Accessories Included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip to tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the gooseneck with mounting holes for screwable lashing rings - The first hole approx. 200 mm from the front, then spaced approx. every 400 mm - 2 pairs of screw-in lashing rings included - Checker plate covering over the gooseneck - 1 pair of removable ALU sideboards approx. 400 mm high, anodized, mounted on the gooseneck - Removable rear ALU wall on the gooseneck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin fitted - Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical fixed support legs at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm Iiedpfjk Af Svjx Aggek - Mechanical fixed support legs at the front - Continuous steel sheet flooring with painted-in sand layer on the platform for anti-slip protection - 1 intermediate table, approx. 500 mm wide, for the extending section, with elongated holes for suspended and adjustable bridging elements - Painted sand coating on the supporting surfaces of the intermediate table - Mechanical locking for securing the intermediate table in the extended position - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widening units approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing light each left and right at the rear of the vehicle - 3 kW electro-hydraulic power unit - Widening boards, loose, in reinforced steel U-frame - Radio and cable remote control - 4 warning panels, approx. 423 x 423 mm

Durumu: kullanılmış, makine/araç numarası: 200072, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2002, toplam uzunluk: 11.950 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 3.450 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: diğer, Üretim yılı: 2002, Donanım: ABS, Tank Tank material: Stainless steel Material code: 1.4404 Insulated: ✓ Compartment capacity (liters): 30,000 liters Number of compartments: 1 Total capacity (liters): 30,000 liters Heating: ✓ Type of heating: Steam Suitable for chemicals: ✓ Test pressure: 4.0 bar Maximum working pressure: 2.0 bar Wall thickness: 4.0 mm (heads), 3.0 mm (shell) Suitable for fuel: ✓ Structure Plate height: 120 cm ADR ADR certified: ✓ ADR classes: FL, AT ADR date: 2024-08-29 ADR tank code: L4BH Chassis Disc brakes: ✓ Chassis height: 100 cm Aluminum rims: ✓ King pin diameter: 2 inch = Additional information = Axle configuration Tyre size: 385/65 R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 55%; Tyre tread right: 40% Axle 2: Tyre tread left: 55%; Tyre tread right: 40% Iiodsu H E I Sspfx Aggjk Axle 3: Tyre tread left: 15%; Tyre tread right: 80% Weights Unladen weight: 7,400 kg Payload: 30,600 kg Gross vehicle weight: 38,000 kg Functional Body manufacturer: Van Hool Identification Registration number: QAH615 = Company information = For more information on this unit, please call or email us. A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durumu: kullanılmış, makine/araç numarası: 62725, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2001, toplam uzunluk: 11.500 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 3.600 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: diğer, Üretim yılı: 2001, Donanım: ABS, = Additional Options and Accessories = - Lift axle = Notes = Chassis Chassis height: 100 cm King pin / fifth wheel diameter: 2 inch King pin / drawbar height: 120 cm Drum brake: ✓ Tank Capacity (litres): 30,000 Number of compartments: 1 Compartment capacity (litres): 30,000 Material code: 14301 Tank material: Stainless steel (Inox) Insulated: ✓ Test pressure: 4.0 bar Maximum working pressure: 3.0 bar Suitable for chemicals: ✓ Isdewc Rizopfx Aggjik = Further Information = Axle configuration Tyre size: 385/65 R22.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Front axle: Tyre tread left: 10%; Tyre tread right: 15% Middle axle: Tyre tread left: 25%; Tyre tread right: 15% Rear axle: Tyre tread left: 10%; Tyre tread right: 20% Weights gross vehicle weight (GVW): 38,000 kg Functional Superstructure brand: Van Hool Identification Registration number: QIP307 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durumu: yeni, boş ağırlık: 15.420 kg, azami yük ağırlığı: 61.080 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear bevel approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Load area: Extendable load area with rear bevel approx. 500 mm x 8° 8 pairs of outward folding lashing rings 1 pair of flat-fitted lashing rings at the front of the load area Recesses in the outer frame of the loading area for attaching tie-down straps Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Two-piece steel ramps: One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramp sections hydraulically lift and fold, hydraulically height-adjustable, and hydraulically shiftable. Maximum load per pair: 50,000 kg. Landing legs: Iijdpfxel Sl Izo Aggsk • JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tires: BPW axles and suspension, 4th and 5th axles steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lockout, activated via reverse gear and manually Tires 235/75 R 17.5 3PMSF Braking system: Braking system according to EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connector rail with sockets 24N, 24S & 15 pin Connection compliant with ISO: 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer High-quality 2-component (2K) topcoat, single color MB 7350 Novagrau Rear part metalized and painted in RAL 9010 (pure white) No metallic paint possible Steel construction: Steel construction made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Accessories: One spare wheel with holder in front of bulkhead 2" kingpin One galvanized steel front wall, approx. 400 mm high Yellow-red air couplings mounted on the galvanized connector rail at the front 2 wheel chocks with holder on the front wall Bracket at rear of gooseneck for ALU drive-on ramps One holder for a rotating beacon at the rear of the trailer Galvanized supports beneath the rear bevel of the loading area White reflector tape according to EU regulations on the sides, extension, and rear in red Electro-hydraulic unit at rear under the loading area Mounts for warning signs with socket at the gooseneck and rear plate left and right Ramp control valves fitted to right-hand side of the trailer One mud flap at the rear of the trailer Manual and documentation on USB stick 3.5" kingpin supplied loose Plug-in ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm (LxH) Rear galvanized drop-in stakes are removable (structure length approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or 40' container 6 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle with control via TEBS E, depending on the current axle load and current loading condition Square cleats 20 x 20 mm every 200 mm on the outer frame of the loading area's bevel On the checker plates, above the kingpin and the loa...

Durumu: kullanılmış, makine/araç numarası: 62722, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2001, toplam uzunluk: 11.600 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 3.600 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: diğer, Üretim yılı: 2001, Donanım: ABS, ADR ADR: ✓ Chassis Kingpin diameter / fifth wheel: 2 inch Kingpin / drawbar height: 120 cm Drum brakes: ✓ Tank Capacity (liters): 30,000 Number of compartments: 1 Compartment volume (liters): 30,000 Material code: 1.4301 Tank material: Stainless steel (Inox) Insulated: ✓ Test pressure: 4.0 bar Max. working pressure: 3.0 bar Chemicals approved: ✓ = Further Information = Axle Configuration Tyre size: 385/65 R22.5 Axle make: SAF Brakes: Drum brakes Suspension: Air suspension Front axle: Lift axle; Tyre tread left: 30%; Tyre tread right: 30% Center axle: Tyre tread left: 10%; Tyre tread right: 30% Rear axle: Tyre tread left: 10%; Tyre tread right: 20% Weights Iodpfx Asv I Uhyoggeik Unladen weight: 7,060 kg Payload: 30,940 kg Gross vehicle weight: 38,000 kg Identification Registration number: QIP285 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durumu: kullanılmış, makine/araç numarası: 62727, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2002, toplam uzunluk: 11.500 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 3.650 mm, süspansiyon: hava, lastik boyutu: 385/65 R22..5, renk: diğer, Üretim yılı: 2002, Donanım: ABS, = Additional Options and Accessories = - Lift axle - Drum brakes = Notes = Chassis Chassis height: 100 cm Kingpin / fifth wheel coupling diameter: 2 inch Kingpin / drawbar height: 120 cm Drum brake: ✓ Tank Capacity (liters): 30,000 Number of compartments: 3 Compartment capacities (liters): 12,000; 6,000; 12,000 Material code: 1.4301 Iedov I S Rxepfx Aggoik Tank material: Stainless steel (Inox) Insulated: ✓ Test pressure: 4.0 bar Maximum working pressure: 3.0 bar Chemicals: ✓ = Further Information = Axle make: SAF Brakes: Drum brakes Suspension: Air suspension Front axle: Tire size: 385/65 R22.5; Tire tread left: 15%; Tire tread right: 20% Middle axle: Tire size: 385/65 R22.5; Tire tread left: 20%; Tire tread right: 15% Rear axle: Tire size: 385/65 R22.5; Tire tread left: 20%; Tire tread right: 45% Gross vehicle weight (GVW): 38,000 kg Registration number: UVG948 = Company Information = For more information on this unit, please call or e-mail. A complete stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durumu: kullanılmış, azami yük ağırlığı: 28.700 kg, toplam ağırlık: 37.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2003, Donanım: ABS, Vehicle identification number: WFB334B9G31025709 Unladen weight: 8,300 kg German inspection (HU) valid until: 12/2024 – Special inspection due Main inspection: 04/2027, Intermediate inspection: 04/2030 Tank volume: 38,000 l 4 compartments – 7,500 l / 11,500 l / 11,500 l / 7,500 l BPW Eco Plus axles with disc brakes Axle loads: 3 x 9,000 kg 4 x domed lids 4 x outlets on right-hand side Iiodpfx Agou Hvn Aogok Auxiliary heater – Webasto in box Stainless steel toolbox Tyres: 385/65 R 22.5 Aluminium wheels Subject to change, prior sale and errors excepted. The description is for general identification of the vehicle and does not constitute a guarantee in the legal sense of a purchase contract. The definitive description is the one stipulated in the sales contract. Our offer does not generally include a new TÜV inspection. If a new inspection is required, we will gladly arrange this through our partner workshops. The vehicle may be branded and/or labelled with advertising. Our general terms and conditions of delivery and payment apply.

Durumu: kullanılmış, makine/araç numarası: 62729, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2002, toplam uzunluk: 11.500 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 3.600 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: diğer, Üretim yılı: 2002, Donanım: ABS, = Additional Options and Equipment = - Lift axle - Drum brakes = Remarks = Chassis Chassis height: 100 cm Kingpin / Fifth wheel diameter: 2 inch Kingpin / Drawbar height: 120 cm Drum brake: ✓ Tank Capacity (liters): 30,000 Number of compartments: 3 Compartment capacities (liters): 12,000; 6,000; 12,000 Material code: 14301 Tank material: stainless steel (Inox) Insulated: ✓ Test pressure: 4 bar Maximum working pressure: 2.6 bar Chemicals: ✓ = Further Information = Technical details Chassis: Van Hool Axle configuration Axle manufacturer: SAF Brakes: Drum brakes Suspension: Air suspension Front axle: Tire size: 385/65 R22.5; Tire tread left: 20%; Tire tread right: 15% Middle axle: Tire size: 385/65 R22.5; Tire tread left: 15%; Tire tread right: 20% Rear axle: Tire size: 385/65 R22.5; Tire tread left: 10%; Tire tread right: 10% Weights Unladen weight: 7,680 kg Payload: 30,320 kg Gross vehicle weight (GVW): 38,000 kg Identification Registration number: UVG950 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock. Iiodpfx Aowb A Tisggjk

Durumu: kullanılmış, makine/araç numarası: 62580, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2000, toplam uzunluk: 11.800 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 3.600 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: diğer, Üretim yılı: 2000, Donanım: ABS, Tank Tank Material: Stainless Steel (Inox) Insulated: ✓ Compartment Capacity (Liters): 30,000 Liters Number of Compartments: 1 Total Capacity (Liters): 30,000 Liters Heating: ✓ Heating Type: Steam Heating Suitable for Chemicals: ✓ Test Pressure: 4.0 bar Maximum Working Pressure: 2.0 bar Suitable for Fuel: ✓ ADR ADR Certified: ✓ ADR Classes: FL, AT ADR Inspection Date: 2024-03-12 ADR Tank Code: L4BH Chassis Disc Brakes: ✓ Aluminum Rims: ✓ Kingpin Diameter / Fifth Wheel: 2 inch Kingpin / Drawbar Height: 120 cm = Further Information = Axle Configuration Tire Size: 385/65 R22.5 Axle Brand: SAF Brakes: Disc Brakes Suspension: Air Suspension Axle 1: Tire Tread Left: 75%; Tire Tread Right: 90% Axle 2: Tire Tread Left: 95%; Tire Tread Right: 90% Axle 3: Tire Tread Left: 90%; Tire Tread Right: 75% Weights Unladen Weight: 7,140 kg Payload: 30,860 kg Gross Vehicle Weight (GVW): 38,000 kg = Company Information = For more information on this unit please call: or e-mail: . Iodpfx Asu H H Uteggeik A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durumu: yeni, boş ağırlık: 15.450 kg, azami yük ağırlığı: 65.550 kg, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 21.900 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 925 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck in SNT design for optimised load platform length, approx. 3,700 mm long, rear section with incline approx. 1,000 mm x 10°. Technical fifth wheel load: 30,000 kg. Compatible with tractor units: 4x2, 6x2, and 6x4. Loading Platform: Double-extendable loading platform, approx. 8,800 mm long with rear incline approx. 500 mm x 10°. A central support beam features a welded-on support table approx. 300 mm wide, with elongated holes at the front and rear for optional bridging elements that can be hooked in and repositioned. Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length. Axles and Tyres: BPW axles and suspension, first axle steered passively, all other axles with hydro-mechanical forced steering. The first axle is equipped with an electro-magnetic reverse lock, activated via reverse gear or manually. Technical axle load: 12,000 kg. Air suspension with lift and lower valve. Manufacturer at our discretion. Sockets and Lighting: 24-volt lighting system in accordance with EU regulations. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. Complete HRM metallisation. Entire steel construction shot-blasted, then hot-dip refined with ZINACOR 850. Paint Finish: 6-step final treatment: Complete steel structure shot-blasted after welding. One coat of zinc-based primer, one coat of bonding primer. Final paint finish with two layers of single-colour 2-pack paint in DB 7350 Novagrey, followed by cavity sealing with special wax. Accessories: Plug-in steel front wall, approx. 400 mm high. Supply line connection bar to tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. If your pin configuration differs from ISO standards, please notify us. 3 kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches. On the gooseneck, 1 pair of plug-in ALU side walls, approx. 400 mm high, anodised finish. 3.5" kingpin. Gooseneck guide plate for the fifth wheel, approx. 500 mm wide. 2 wheel chocks with mounting bracket in front of the front wall. Mechanical landing legs with 2-speed gearbox and crank. Control valves for hydraulic ramps on the right side of the vehicle. 1 pair of mechanical rear supports. Central lubrication system with 1 pump (BEKAMAX brand) using normal grease (NLGI-2 standard). Removable protection for the central lubrication pump(s). Remote axle steering from the front and rear by cable remote control using push-buttons, with single-track control, without installation in the tractor unit. Under the gooseneck and at the rear end cross-member, left and right, one 7-pin socket with bracket for warning boards. One 7-pin socket at the rear end cross-member. Operating manual and documentation included. Ijdpfx Agorigw Rsgoik One one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm, straight version. Please note that special equipment and accessories will usually increase the unladen weight and accordingly reduce the payload capacity. Warning package: 4 warning boards, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and mounting brackets for beacon.