Mafsallı teleskopik çalışma platformu

Haulotte HA20RTJ Pro Diesel, 20.6 m Working Height, 12.2 m

Koşul: yeni, makine/araç numarası: 1, boş ağırlık: 11.000 kg, azami yük ağırlığı: 28.000 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 870 mm, süspansiyon: hava, lastik boyutu: 245.70 r 17.5, renk: koyu kırmızı, Üretim yılı: 2020, Donanım: ABS, New Ceylan low-loader trailer, ready for registration, 3 axles with 1st axle liftable and 3rd axle steering, EBS, full-width double electro-hydraulic ramps, wideners, winch prearrangement, low deck height 87 cm, bed length 9.95 m, total length 13.65 m, RUD lashing rings, immediate delivery subject to prior sale - warranty - OFFICIAL DEALER INTERDRIVE SRL - PARMA. Fodpsh S Aw Rofx Addopg

Koşul: yeni, azami yük ağırlığı: 38.953 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Gross vehicle weight: 49,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg Unladen weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck length: 3,850 mm Fifth wheel height loaded: 1,200 mm Loading platform length: 9,300 mm Extendable by: 0 mm Axle spacing: 1,360 mm Steering angle radius (rear): 2,300 mm Loading height at max. load: 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical Description Gooseneck: Gooseneck with chamfered front corners at 45° and rear taper of approx. 750 mm x 10°. Fjdog Sk Tropfx Addopg 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, 30 mm thick. Loading platform: Loading platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear slope of approx. 1,000 mm x 8°. 6 pairs of folding lashing rings facing outward (LC 5,000 daN). 2 pairs of folding lashing rings facing outward (LC 10,000 daN). 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN). Cut-outs in the outer frame of the loading platform for attaching tensioning straps. (LC 2,000 daN). Hardwood flooring approx. 48 mm thick, above the axles fitted with chequer-plate covering. Ramps: Two-piece steel ramps: One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically foldable ramp sections, hydraulic lifting device and can be hydraulically adjusted laterally. Maximum load per pair: 40,000 kg Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: 235/75 R 17.5 tyres as per manufacturer's selection. Axles: SAF axles, air-suspended, with drum brakes, featuring lift/lower function. Last axle is force-steered with electro-magnetic reverse lock, activatable via reverse gear or manually. Axle tools. Brake System: Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit. Steel Construction: Steel construction made from high-strength fine-grained steel. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: Premium and durable corrosion protection via sandblasted welded frame, primed with 2-component (2K) zinc dust primer. High-quality single-tone 2-component (2K) top coat in RAL colours of your choice. Rear metalized and painted in RAL 9010 (pure white). Metallic paint not possible. Electrical System: Electrical system compliant with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets. ISO-compliant connections. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories Included 2" king pin One galvanized steel front bulkhead approx. 400 mm high. At the galvanized front connection strip yellow/red airline couplings. 4 wheel chocks with holder on the front bulkhead (± 5kg). Cable for supplying electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long, max. 250A) between semi-trailer and tractor unit, with plug connection (ANDERSON-ANDERSON). Galvanized folding supports under the rear slope of the loading platform. Bracket for a rotary beacon at the rear of the trailer. Control valves for the ramps installed on right-hand side of trailer (± 4kg). Yellow reflective tape according to EU regulations on the sides and rear of the trailer. Electro-hydraulic unit mounted at the rear under the loading

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2016, süspansiyon: hava, Üretim yılı: 2016, Donanım: hidrolik arka platform, Süspansiyon: Havalı süspansiyon Arka aks 1: Yönlendirilebilir Fodpfx Asvvwzroddopg Arka aks 2: Yönlendirilebilir Arka aks 3: Yönlendirilebilir Azami yüklü ağırlık: 48.000 kg Teknik durumu: Çok iyi Görsel durumu: Çok iyi Fiyat: Talep üzerine Daha fazla bilgi için lütfen David F Middelman ile iletişime geçin.

Koşul: yeni, makine/araç numarası: 087c7b6bc0c6118a84279fb46, boş ağırlık: 4.100 kg, Further Information Frame Steel welded construction made of fine-grained steel, hot-dip galvanized, flat platform without raised edges, load area beveled downward by approx. 8° behind the rear axle. Longitudinal beams made from steel profiles. Steel frame hot-dip galvanized, with stainless steel plate at the bending point as rope guide—flush with the floor. For trucks with wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1,350 mm. Towing Coupling Towing coupling ball head D24.8: (height from ground to top approx. 480 mm), towing capacity 2,800 kg, incl. installation and electrical wiring with 7-pin socket. Accessories/Modifications 2 holders for wheel chocks, foldable aluminium side underrun protection – transferred from the truck! Steel underrun protection, quarter-shell mudguards with mudflaps – transferred from the truck! Storage Boxes Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with padlock (padlock not included). 1 holder for 3 fuel canisters. 1 stainless steel storage box, w=600 / h=400 / d=500 mm, with polished door, lockable, contains control valve and electrohydraulic pump unit. Control box with circumferential door seal and sealing sleeves on rear (splash proof according to technical feasibility). Electrics Adjustment of existing taillights, 2 additional LED work lights recessed into front wall, switched via parking light with switch on outer front wall left side, 1 LED work light at rear, with integrated reversing camera incl. color flat screen monitor, monitor with suction cup mount and 24V power supply, voltage converter 24/12V, 1 7-pin 12V socket = plug adapter. Floor Mega Grip galvanized serrated grating, steel grating 50/4 mm incl., mesh size 50 mm. Top side with anti-slip serration, continuous over the entire main frame platform. Lashing Rings 12 pairs of pivot-mounted lashing rings on the outer frame—each rated 10 tons. One at the very front and one at the very rear. One lashing ring at the very rear in the center for winch cable attachment. 12 lashing points recessed centrally in the floor, each rated 5 tons (not included in rear bevel). Headboard Headboard made from steel sheet, height 1,500 mm. Fixed, with corner posts the height of the front wall. Each with 2 x 12 suspension brackets for lashing chains on left and right sides of the headboard. Fedpfxsi Riyts Addspg Winch Electric winch, 24 volt, pull rating approx. 6,350 kg, mounted centrally at headboard (recessed into loading platform), operated by radio remote control, rope length min. 35 m x 9.5 mm, with roller fairlead, with rope pressure plate, incl. overload protection, freewheeling clutch, hand control with approx. 5 m control cable, winch certification, civil engineer test report, inspection book, operating manual. Ramps Length 3,500 mm – 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg/pair (also during ramp loading), electrohydraulically foldable and laterally adjustable – incl. electrohydraulic pump unit. Ramp angle approx. 8° with lowered rear axle. Ramp base made of hot-dip galvanized steel grating (same as loading platform), with anti-slip serration. Ramps can be contracted to approx. 170 mm, hydraulic ramp extension. Ramp prepared for operation at loading docks with full load capacity. Ramp locking with 2 tension straps. Ramp tip offset (nose min. 150 mm) suitable for resting on loading ramps. Ramp operation labeling. Descent brake valve for lowering ramp. Support Height-adjustable support legs at rear, foldable a

Koşul: ikinci el, Üretim yılı: 2017, çalışma saatleri: 3.562 h, makine/araç numarası: 2025065, direk tipi: teleskopik, yakıt türü: dizel, Donanım: her tahrikli, Tahrik: Tekerlek Boş ağırlık: 13.320 kg Kaldırma kapasitesi: 230 kg Çalışma yüksekliği: 2.250 cm Fpodpfsuwuzvox Addsg Maks. yatay erişim: 1.830 m Taşıma ölçüleri (U x G x Y): 9,85 x 2,47 x 2,7 Daha fazla bilgi için PFEIFER GROUP ile iletişime geçin.