Düşük yükleyici

Ozgul LW3 EU FIX

Durumu: yeni, Üretim yılı: 2024, Donanım: ABS, = Additional Options and Equipment = - Electronic Braking System (EBS) - Lift Axle - Spare Wheel = Remarks = MASSES & DIMENSIONS Gross Vehicle Weight (kg): 58,000 Loading Platform Length (mm): 9,000 Axle Group Weight (kg): 36,000 Total Length (mm): 13,550 Kingpin Capacity (kg): 22,000 Total Width (mm): 2,550 Curb Weight (kg): 12,300 Loading Platform Height (mm): 920 Payload (kg): 45,700 Height of Fifth Wheel (mm): 1,310 CONSTRUCTION Base Chassis Heavy-duty box-type chassis designed for extra durability. All-welded S355 steel chassis. Outer frame constructed from UPE 240 profile. Chassis Welding: Automatic ARC submerged welding. Superstructure Welding: Automatic robotic welding. Axles (Type): Özkoç Trax or Osman Koç Turkish brand, drum brakes, 3 x 12 ton axles Axle Lifting: 1st axle automatic lift Suspension (Type): Air suspension Steering Axles: – Kingpin (Type): 1 position with 1x coupling pin, 2” (EU approved), Çayırova brand Tyres: 12 + 1 units, 245 / 70 R 17.5, Fulda, Pirelli or Goodyear brand Rims: 12 + 1 units, 6.75 x 17.5 steel rims, Jantas or Ako brand Landing Gear: Mechanically operated from one side, two-speed, Gos brand Brake System: Wabco EBS (4S/3M) with RSS, conforms to EC Directive, ADR adaptation Brake Chambers: 1st axle: 2 emergency brake chambers 2nd axle: 4 service brake chambers Electrical System: 24V, 2x7 + 1x15 pin sockets, conforms to SAE standard, ADR adaptation, SABA brand • 2 x rear stop lights • 4 x side LED lights • 2 x white LED lights • 2 x front LED lights • 2 x license plate lights • 2 x rotating beacons Flooring: Above wheel arches and platform edges covered with chequered plate and hardwood, center area covered with flat steel sheet Rear Loading Ramps: Hydraulically operated rear ramps with electro-hydraulic pump and cable push-button remote control. Ramp length: 2,500 mm + 1,500 mm, width: 900 mm. All ramps are internally and externally sliding, fully hydraulic. Short steel ramps at the neck. Colour: As requested Paint Application: Sandblasting, chemical cleaning, HYZINC coating, epoxy undercoat, finished with 2 coats of acrylic paint. TECHNICAL SPECIFICATIONS Accessories • 2 x 7 heavy-duty lashing rings mounted on the outer frame, mushroom type • 4 x certified Expray mud flaps • 1 x plastic water tank • 2 x wheel chocks and holders • 2 x 7 galvanized side extension brackets, 250 mm + 250 mm • 2 x side guards, aluminium • 1 x toolbox • 1 x spare wheel carrier with 1 mounted tyre (on the gooseneck) • 2 x manual support legs at the rear • 2 x reflective tape and reflector signs at rear and sides • 2 x side extension reflectors • Steel front panel (height: 400 mm) • Aluminium side panels on gooseneck section (height: 400 mm) Djdpfsxgq Agsx Ah Njcn • 1 number plate mounting at rear ramps or bumper = Further Information = Curb Weight: 12,300 kg CE Marking: Yes

Durumu: yeni, Üretim yılı: 2024, Donanım: ABS, = Additional Options and Equipment = - Electronic Braking System (EBS) - Lift Axle - Spare Wheel = Remarks = MASSES & DIMENSIONS Gross Vehicle Weight (kg): 58,000 Loading Platform Length (mm): 9,000 Axle Group Weight (kg): 36,000 Total Length (mm): 13,550 Kingpin Capacity (kg): 22,000 Total Width (mm): 2,550 Curb Weight (kg): 12,300 Loading Platform Height (mm): 920 Payload (kg): 45,700 Height of Fifth Wheel (mm): 1,310 CONSTRUCTION Base Chassis Heavy-duty box-type chassis designed for extra durability. All-welded S355 steel chassis. Outer frame constructed from UPE 240 profile. Chassis Welding: Automatic ARC submerged welding. Superstructure Welding: Automatic robotic welding. Axles (Type): Özkoç Trax or Osman Koç Turkish brand, drum brakes, 3 x 12 ton axles Axle Lifting: 1st axle automatic lift Suspension (Type): Air suspension Steering Axles: – Kingpin (Type): 1 position with 1x coupling pin, 2” (EU approved), Çayırova brand Tyres: 12 + 1 units, 245 / 70 R 17.5, Fulda, Pirelli or Goodyear brand Rims: 12 + 1 units, 6.75 x 17.5 steel rims, Jantas or Ako brand Landing Gear: Mechanically operated from one side, two-speed, Gos brand Brake System: Wabco EBS (4S/3M) with RSS, conforms to EC Directive, ADR adaptation Brake Chambers: 1st axle: 2 emergency brake chambers 2nd axle: 4 service brake chambers Electrical System: 24V, 2x7 + 1x15 pin sockets, conforms to SAE standard, ADR adaptation, SABA brand Dsdpfxswkyddj Ah Nocn • 2 x rear stop lights • 4 x side LED lights • 2 x white LED lights • 2 x front LED lights • 2 x license plate lights • 2 x rotating beacons Flooring: Above wheel arches and platform edges covered with chequered plate and hardwood, center area covered with flat steel sheet Rear Loading Ramps: Hydraulically operated rear ramps with electro-hydraulic pump and cable push-button remote control. Ramp length: 2,500 mm + 1,500 mm, width: 900 mm. All ramps are internally and externally sliding, fully hydraulic. Short steel ramps at the neck. Colour: As requested Paint Application: Sandblasting, chemical cleaning, HYZINC coating, epoxy undercoat, finished with 2 coats of acrylic paint. TECHNICAL SPECIFICATIONS Accessories • 2 x 7 heavy-duty lashing rings mounted on the outer frame, mushroom type • 4 x certified Expray mud flaps • 1 x plastic water tank • 2 x wheel chocks and holders • 2 x 7 galvanized side extension brackets, 250 mm + 250 mm • 2 x side guards, aluminium • 1 x toolbox • 1 x spare wheel carrier with 1 mounted tyre (on the gooseneck) • 2 x manual support legs at the rear • 2 x reflective tape and reflector signs at rear and sides • 2 x side extension reflectors • Steel front panel (height: 400 mm) • Aluminium side panels on gooseneck section (height: 400 mm) • 1 number plate mounting at rear ramps or bumper = Further Information = Curb Weight: 12,300 kg CE Marking: Yes

Durumu: yeni, Üretim yılı: 2024, Donanım: ABS, = Additional Options and Equipment = - Electronic Braking System (EBS) - Lift Axle Dcodpfjvg Hzpsx Ah Njn - Spare Wheel = Remarks = MASSES & DIMENSIONS Gross Vehicle Weight (kg): 58,000 Loading Platform Length (mm): 9,000 Axle Group Weight (kg): 36,000 Total Length (mm): 13,550 Kingpin Capacity (kg): 22,000 Total Width (mm): 2,550 Curb Weight (kg): 12,300 Loading Platform Height (mm): 920 Payload (kg): 45,700 Height of Fifth Wheel (mm): 1,310 CONSTRUCTION Base Chassis Heavy-duty box-type chassis designed for extra durability. All-welded S355 steel chassis. Outer frame constructed from UPE 240 profile. Chassis Welding: Automatic ARC submerged welding. Superstructure Welding: Automatic robotic welding. Axles (Type): Özkoç Trax or Osman Koç Turkish brand, drum brakes, 3 x 12 ton axles Axle Lifting: 1st axle automatic lift Suspension (Type): Air suspension Steering Axles: – Kingpin (Type): 1 position with 1x coupling pin, 2” (EU approved), Çayırova brand Tyres: 12 + 1 units, 245 / 70 R 17.5, Fulda, Pirelli or Goodyear brand Rims: 12 + 1 units, 6.75 x 17.5 steel rims, Jantas or Ako brand Landing Gear: Mechanically operated from one side, two-speed, Gos brand Brake System: Wabco EBS (4S/3M) with RSS, conforms to EC Directive, ADR adaptation Brake Chambers: 1st axle: 2 emergency brake chambers 2nd axle: 4 service brake chambers Electrical System: 24V, 2x7 + 1x15 pin sockets, conforms to SAE standard, ADR adaptation, SABA brand • 2 x rear stop lights • 4 x side LED lights • 2 x white LED lights • 2 x front LED lights • 2 x license plate lights • 2 x rotating beacons Flooring: Above wheel arches and platform edges covered with chequered plate and hardwood, center area covered with flat steel sheet Rear Loading Ramps: Hydraulically operated rear ramps with electro-hydraulic pump and cable push-button remote control. Ramp length: 2,500 mm + 1,500 mm, width: 900 mm. All ramps are internally and externally sliding, fully hydraulic. Short steel ramps at the neck. Colour: As requested Paint Application: Sandblasting, chemical cleaning, HYZINC coating, epoxy undercoat, finished with 2 coats of acrylic paint. TECHNICAL SPECIFICATIONS Accessories • 2 x 7 heavy-duty lashing rings mounted on the outer frame, mushroom type • 4 x certified Expray mud flaps • 1 x plastic water tank • 2 x wheel chocks and holders • 2 x 7 galvanized side extension brackets, 250 mm + 250 mm • 2 x side guards, aluminium • 1 x toolbox • 1 x spare wheel carrier with 1 mounted tyre (on the gooseneck) • 2 x manual support legs at the rear • 2 x reflective tape and reflector signs at rear and sides • 2 x side extension reflectors • Steel front panel (height: 400 mm) • Aluminium side panels on gooseneck section (height: 400 mm) • 1 number plate mounting at rear ramps or bumper = Further Information = Curb Weight: 12,300 kg CE Marking: Yes

Durumu: yeni, Üretim yılı: 2024, Donanım: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Lift axle - Spare wheel = Notes = MASSES & DIMENSIONS Gross Vehicle Weight (kg): 58,000 Loading Platform Length (mm): 9,000 Weight of Axle Group (kg): 36,000 Total Length (mm): 13,550 Kingpin Capacity (kg): 22,000 Total Width (mm): 2,550 Curb Weight (kg): 12,300 Loading Platform Height (mm): 920 Payload (kg): 45,700 Height of 5th Wheel (mm): 1,310 CONSTRUCTION Base Chassis Dcedjvg Hrzjpfx Ah Njn Heavy-duty, extra-durable design, box-type chassis. Fully welded S355 steel chassis. Outer frame is UPE 240 profile. Welding (Chassis): Automatic arc submerged welding. Welding (Superstructure): Automated robot welding. Axles (Type): Özkoç Trax or Osman Koç, Turkish brands, drum brakes, 3 x 12-ton axles. Axle Lifting: 1st axle automatic lift. Suspension (Type): Air suspension. Steering Axles: - Kingpin (Type): Single position with 1x coupling pin 2" (EU approved), Çayırova brand. Tyres: 12+1 units, 245/70 R 17.5, Fulda, Pirelli, or Goodyear brand. Rims: 12+1 units, 6.75 x 17.5 steel rims, Jantas or Ako brand. Landing Gear: Mechanically operated from one side, two-speed, Gos brand. Brake System: Wabco EBS (4S/3M) with RSS, in accordance with EC Directive, ADR adapted. Brake Chambers: - 1 axle with 2 emergency brake chambers - 2 axles with 4 service brake chambers Electric System: 24V, 2x7 + 1x15-pin sockets, per SAE standard, ADR adapted, SABA brand. • 2 x Rear stop lights • 4 x Side LED lights • 2 x White LED lights • 2 x Front LED lights • 2 x Number plate lights • 2 x Rotating beacon lights Floor: Above the tyres and at the edges of the platform: chequered plate and hardwood; middle surface: flat steel plate. Rear Loading Ramps: Hydraulically operated rear ramps with electrohydraulic pump, remote control (cable push button); ramp length 2,500 mm + 1,500 mm, width 900 mm; all ramps hydraulically moveable inside and outside. Short steel ramps behind gooseneck. Color: As requested Paint Application: Sandblasted, chemical cleaning, HYZINC coating, epoxy coating, finished with 2 layers of acrylic paint. TECHNICAL SPECIFICATIONS Accessories: • 2 x 7 heavy-duty lashing rings (outer frame, mushroom type) • 4 x Certified spray suppression mud flaps • 1 x Plastic water tank • 2 x Wheel chocks with holders • 2 x 7 galvanized side extension brackets, 250 mm + 250 mm • 2 x Side impact protection, aluminium • 1 x Toolbox • 1 x Spare wheel carrier (with 1 tyre, on gooseneck) • 2 x Manual support legs at the rear • 2 x Reflective tapes and reflector plates at rear and sides • 2 x Side extension reflectors • Steel front panel (height: 400 mm) • Aluminium side panels on gooseneck section (height: 400 mm) • 1 number plate holder at rear ramps or rear bumper = Additional Information = Unladen weight: 12,300 kg CE marking: Yes

Durumu: yeni, Üretim yılı: 2024, Donanım: ABS, = Further options and accessories = - Electronic Braking System (EBS) - Lifting axle - Spare wheel = Notes = MASSES & DIMENSIONS Gross Vehicle Weight (kg): 58,000 Loading Platform Length (mm): 9,000 Weight of Axle Group (kg): 36,000 Total Length (mm): 13,550 Kingpin Capacity (kg): 22,000 Total Width (mm): 2,550 Curb Weight (kg): 12,300 Dedpfx Asvg Hgxeh Njcn Loading Platform Height (mm): 920 Pay Load (kg): 45,700 Fifth Wheel Height (mm): 1,310 CONSTRUCTION Base Chassis: Heavy-duty, high-durability, box-type chassis, fully welded from S355 steel. Outer frame: UPE 240 profile. Chassis welding: Automatic submerged-arc welding. Superstructure welding: Automatic robot welding. Axles (Type): Özkoç Trax or Osman Koç Turkish-brand, drum brake axles, 3 x 12 ton Axle Lifting: 1st axle with automatic lifting Suspension (Type): Air suspension Steering Axles: - Kingpin (Type): Single-position with 1x coupling pin, 2" (EU approved), Çayırova brand Tires: 12+1 units, 245/70 R17.5, Fulda or Pirelli or Goodyear Rims: 12+1 units, 6.75 x 17.5 steel rims, Jantas or Ako brand Landing Gear: Manually operated from one side, two-speed, Gos brand Brake System: Wabco EBS (4S/3M) with RSS according to EC Directive, ADR compliant Brake Chambers: - 1 axle with 2 emergency brake chambers - 2 axles with 4 service brake chambers Electrical System: 24V, 2x7-pin + 1x15-pin sockets, compliant with SAE standards and ADR SABA brand • 2 x rear stop lights • 4 x side LED lights • 2 x white LED lights • 2 x front LED lights • 2 x license plate lights • 2 x rotating beacons Floor: Above tires and platform edges: chequered plate and hardwood; main floor area: flat sheet steel Rear Loading Ramps: Hydraulically operated rear ramps with electro-hydraulic pump. Remote push-button control. Ramp length: 2,500 mm + 1,500 mm, width: 900 mm. All ramps sliding in and out, fully hydraulic. Short steel ramps also fitted behind gooseneck. Color: On request Paint Application: Sandblasted, chemically cleaned, HYZINC coated, epoxy base, and 2-coat acrylic topcoat TECHNICAL SPECIFICATIONS Accessories: • 2 x 7 heavy-duty mushroom-type lashing rings, outer frame mounted • 4 x certified "Expray" mud flaps • 1 x plastic water tank • 2 x wheel chocks and holders • 2 x 7 galvanized side extension brackets – 250 mm + 250 mm • 2 x aluminum side underrun protections • 1 x toolbox • 1 x spare wheel carrier with tire (on gooseneck) • 2 x manual support legs at rear • 2 x reflective tapes and reflector plates at rear and on sides • 2 x side extension reflectors • Steel front panel (height: 400 mm) • Aluminum side boards on gooseneck section (height: 400 mm) • 1 mounting plate for license at rear ramps or bumper = Further information = Unladen weight: 12,300 kg CE certified: yes

Durumu: yeni, Üretim yılı: 2024, Donanım: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Lift axle - Spare wheel = Notes = MASSES & DIMENSIONS Gross Vehicle Weight (kg): 58,000 Loading Platform Length (mm): 9,000 Axle Group Weight (kg): 36,000 Total Length (mm): 13,550 Kingpin Load (kg): 22,000 Overall Width (mm): 2,550 Unladen Weight (kg): 12,300 Loading Platform Height (mm): 920 Payload (kg): 45,700 Fifth Wheel Height (mm): 1,310 CONSTRUCTION Base Chassis Heavy-duty, extra-durable box-type chassis. Entire structure made of S355 steel, fully welded. Outer frame profile: UPE 240. Chassis Welding: Automatic submerged arc welding. Superstructure Welding: Automatic robotic welding. Axles (Type): Özkoç Trax or Osman Koç (Turkish brand) drum brake axles, 3 x 12 ton capacity. Axle Lift: 1st axle automatic. Suspension (Type): Air suspension. Steering Axles: None. Kingpin (Type): Single-position with 1 x coupling pin, 2” (EU approved), Çayırova brand. Tyres: 12+1 units, 245/70 R 17.5, Fulda, Pirelli, or Goodyear brand. Rims: 12+1 units, 6.75 x 17.5 steel rims, Jantas or Ako brand. Landing Gear: Mechanically operated from one side, two-speed, Gos brand. Brake System: Wabco EBS (4S/3M), RSS as per EC directive, ADR compliant. Brake Chambers 1st axle: 2 emergency brake chambers 2nd axle: 4 service brake chambers Electrical System 24V, 2x7 + 1x15 pin sockets, SAE standard, ADR compliant, SABA brand. • 2 x rear stop lights - 4 x side LED lights • 2 x white LED lights - 2 x front LED lights • 2 x license plate lights - 2 x rotating lights Floor Platform and edges above wheels covered with chequered sheet and hardwood; central area steel sheet. Rear Loading Ramps Hydraulically operated rear ramps with electro pump, cable push-button remote control. Sliding internal/external hydraulics. Ramp length: 2,500mm + 1,500mm, width: 900mm. Short steel ramps at neck. Colour: As requested Paint Sandblasted, chemically cleaned, HYZINC coated, epoxy coating, two coats of acrylic paint. TECHNICAL SPECIFICATIONS Accessories • 2 x 7 heavy-duty mushroom-type lashing rings on outer frame • 4 x certified mud flaps • 1 x plastic water tank • 2 x wheel chocks with holders • 2 x 7 galvanized side extension brackets, 250mm each • 2 x aluminium side underrun protections • 1 x toolbox • 1 x spare wheel holder incl. 1 tyre (on gooseneck) • 2 x manual rear supports • 2 x reflective tapes and reflectors at rear and sides • 2 x side extension reflectors • Steel front panel (height: 400mm) • Aluminium side panels on the gooseneck (height: 400mm) Djdpfxsvg Hw Re Ah Nocn • 1 license plate holder on rear ramps or bumper = Further Information = Unladen weight: 12,300 kg CE certification: yes

Durumu: yeni, Üretim yılı: 2024, Donanım: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Lift axle - Spare wheel = Notes = Dcedpjvg E S Hjfx Ah Non MASSES & DIMENSIONS Gross Vehicle Weight (kg): 58,000 Loading Platform Length (mm): 9,000 Weight of Axle Group (kg): 36,000 Total Length (mm): 13,550 Kingpin Capacity (kg): 22,000 Total Width (mm): 2,550 Curb Weight (kg): 12,300 Loading Platform Height (mm): 920 Payload (kg): 45,700 Fifth Wheel Height (mm): 1,310 CONSTRUCTION Base Chassis Heavy-duty and extra-durable box-type chassis, constructed from fully welded S355 steel. The outer frame is UPE 240 profile. Welding (Chassis): Automatic submerged arc welding. Welding (Superstructure): Automatic robotic welding. Axles (Type): Özkoç Trax or Osman Koç Turkish brand, drum brakes, 3 x 12-ton axles. Axle Lifting: 1st axle with automatic lifting function. Suspension (Type): Air suspension. Steering Axles: - Kingpin (Type): 1-position with 1x coupling pin, 2" (EU approved), Çayırova brand. Tires: 12+1 units, 245/70 R17.5, Fulda, Pirelli, or Goodyear brand. Rims: 12+1 units, 6.75 x 17.5 steel rims, Jantas or Ako brand. Landing Gear: Mechanically operated from one side, two-speed, Gos brand. Brake System: Wabco EBS (4S/3M) with RSS, compliant with EC directives and ADR adaptation. Brake Chambers: 1 axle with 2 emergency brake chambers; 2 axles with 4 service brake chambers. Electrical System: 24V, 2x7 + 1x15 pin sockets, SAE standard, ADR adaptation, SABA brand. • 2 x Rear stop lights • 4 x Side LED lights • 2 x White LED lights • 2 x Front LED lights • 2 x License plate lights • 2 x Rotating lights Floor: The area above the tires and platform edges is covered with chequered plate and hardwood; the middle is flat sheet steel. Rear Loading Ramps: Hydraulically operated, powered by electro pump; rear ramps operated by cable push-button remote. Ramp length: 2,500 mm + 1,500 mm; width: 900 mm. All ramps are hydraulic, internal and external sliding. Short steel ramps located behind the neck. Color: Upon request Paint Application: Sandblasting, chemical cleaning, zinc coating, epoxy primer, two coats of acrylic paint. TECHNICAL SPECIFICATIONS Accessories • 2 x 7 pieces heavy-duty lashing rings, mushroom type, mounted on the outer frame • 4 x Certified spray/mud flaps • 1 x Plastic water tank • 2 x Wheel chocks with holders • 2 x 7 galvanized side extension brackets 250 mm + 250 mm • 2 x Side guards, aluminum • 1 x Toolbox • 1 x Spare wheel carrier with 1 tire (on gooseneck) • 2 x Manual support legs at the rear • 2 x Reflective tapes and reflector signs on the rear and sides • 2 x Side extension reflectors • Steel front panel (height: 400 mm) • Aluminum side panels in gooseneck section (height: 400 mm) • 1 mounting location for license plate on rear ramps or bumper = Further Information = Unladen weight: 12,300 kg CE marking: yes