Yarı römork

FAYMONVILLE Prefamax Innenlader 3 x LASI

Our complete inventory of vehicles that are available immediately or at short notice can be found on our website.

Excerpt from the equipment. Full specification available upon request.

GOOSENECK
* Gooseneck designed as a loading platform with aluminum checker plate covering
* Hydraulic lifting arm with approx. -280/+250 mm lifting and lowering range
* Two king pin positions at approx. 2,300 mm and approx. 2,000 mm
* Suitable for tractor units: 4 x 2, 6 x 2 or 6 x 4
* 2-inch king pin
* 3 pairs of recessed lashing rings on the gooseneck (LC 6,300 daN)
* ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets, 24N connection as per ISO-1185, 24S connection as per ISO-3731
* 15-pin connection as per ISO-12098
* Yellow-red air couplings at the front connector strip
* Lighting for the operation of the gooseneck, suspension, and hydraulic tensioning with on/off switch
* Boom for suspending supply lines on the front end of the gooseneck
* Operation of all work lights in the gooseneck area via switches on the gooseneck

LOADING AREA
* Loading chamber approx. 9,500 mm long, fitted with lower angle profiles to accommodate loading pallets (distance king pin to center of axle assembly approx. 8,000 mm)
* BPW stub axles with drum brakes and independent wheel suspension, hydraulic axle compensation with raising and lowering facility
* Tyres: 385/65 R 22.5 (M+S)
* Mechanical drop-leg supports for approx. 48,000 kg support load
* Boarding ladder mounted front right with 2 plug-in grab poles
* Removable full fairing on both sides ahead of the axle assembly
* WABCO Roll Stability Support (RSS)
* 9 pairs of lashing rings on the longitudinal beams (LC 6,300 daN)
* Grating support flush with height between the guide rails of the load securing devices on the longitudinal beams
* First and last axle left and right can be lifted manually
* Toolboxes behind the axle assembly left and right, splash-proof
* Rear end chamfered for easier insertion of loading pallets
* Lashing eyes at the rear cross member for mechanical tensioning
* Rear door with cross bracing, hinged on the left, hydraulically locked on the right, and can be secured horizontally at 90°, 105°, and 270°
* Underrun protection, foldable upwards for transporting up to 4 empty standard pallets
* Number plate holder with lighting on the rear door
* 7-pin socket at the rear cross member
* Electro-hydraulic unit for operating the hydraulic functions (without installation in the tractor unit)
* TPMS tire pressure monitoring sensors on all wheels including spares
* Indicator lamps for vehicle nominal ride height in the operator area
* 1 odometer mounted on the left
* 2 axle load gauges mounted on the left side including axle load diagram
* 2 rubber buffers at the front of the loading channel as stops for loading pallets
* Hydraulic preinstallation including control for mounting 4 pairs of our hydraulic load securing devices
* 1 spare wheel holder, right-hand side in direction of travel
* EU reflector at the rear
* Acoustic warning signal when reversing
* Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917)

BRAKE SYSTEM:
* WABCO EBS brake system compliant with EU regulations. WITHOUT connecting cable to the tractor unit

LIGHTING SYSTEM
* 24-volt lighting system in ASPÖCK-NORDIK full LED version as per EU requirements (ASS 3)

SURFACE TREATMENT
Laodpfxowx Dc Hs Aggjk
HRM metallization

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.