Alçak yükleyici yarı römork

Faymonville 3-Achs-Semi-hydr. Ladeboden-hydr. Rampen

Gooseneck:
- Gooseneck in SNT design for optimized loading deck length, approx. 3,700 mm long
- Gooseneck rear with a chamfer of approx. 1,000 mm x 6°
- Technical fifth wheel load: 18,000 kg
- For tractor units: 4 x 2 or 6 x 2

Loading platform:
- Loading platform length approx. 9,400 mm, rear chamfer approx. 900 mm x 6°
- Platform behind the gooseneck, hydraulically liftable and lowerable
- Platform length approx. 3,000 mm. Load capacity up to approx. 9,000 kg

Ramps:
- One pair of two-part steel ramps, approx. 4,350 x 900 mm
- Hardwood covering
- Hydraulically folding ramp tips
- Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward

Axles, suspension, and tires:
- BPW axles and suspension, two rigid axles, one steering trailing axle
- Technical axle load: 12,000 kg
- Air suspension with lifting and lowering valves
- Tires 235/75 R 17.5

Included accessories:
- Plug-in steel front wall, approx. 400 mm high
- Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917)
- 3 kW electro-hydraulic unit for hydraulic functions (except winches)
- Outer beams of the gooseneck with mounting holes for bolted lashing rings
- First hole approx. 200 mm from the front, then approx. every 400 mm
- 2 pairs of screw-in lashing rings included (LC 5,000 daN)
- One mounting hole in the upper rear area of the gooseneck outer beams for a screw-in lashing ring
- 1 pair of screw-in lashing rings included (LC 10,000 daN)
Bwjdpowx E Hmjfx Ah Hjw
- 3 pairs of recessed lashing rings inside the outer beams of the gooseneck (LC 5,000 daN)
- 3 pairs of lashing rings in the center of the gooseneck (LC 5,000 daN)
- 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN)
- On the gooseneck: 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized
- On the gooseneck: one plug-in aluminum rear board, approx. 400 mm high, anodized
- Hardened wood covering over the gooseneck approx. 40 mm
- 2" king pin
- Guide plate on the gooseneck for the fifth wheel plate approx. 500 mm wide
- 4 wheel chocks
- Mechanical landing legs with 2-speed gearbox and crank
- JOST Module B – static test load = 50,000 kg
- On the lifting bed continuous and inter-axle interrupted hardwood covering approx. 50 mm thick
- 9 pairs of recessed lashing rings flush in the outer frame of the platform, foldable to the outside (LC 10,000 daN)
- Of these, 3 pairs in the lifting bed frame and 6 pairs in the platform frame
- 1 pair of foldable mechanical rear supports with single-hand operation
- Central lubrication system with one BEKAMAX pump, standard grease according to NLGI-2
- Hardwood covering on the chamfer of the platform
- 2 additional pairs of bolted lashing rings (LC 5,000 daN)
- Electric cable winch, approx. 5,400 kg pulling force, with radio remote control. Steel cable, approx. 24 m long, cable diameter approx. 9.5 mm, incl. cable pressure roller
- 1 spare wheel with mounting adapter under the loading platform on the right in front of the axles
- 9 pairs of recessed lashing rings along the central beam (LC 5,000 daN)
- Of these, 3 pairs in the lifting bed and 6 pairs in the rear section of the platform
- 1 INOX toolbox, approx. 620 x 300 /180 x 950 mm, left and right under the platform
- WABCO Smart Board system
- 1st axle with starting aid
- 1 reversing spotlight each left and right at the rear of the vehicle
- 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, including 2 position lights and mounts for beaco

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.