Çalışma platformlu yarı römork

KÖGEL 3-Achs-Mega Chassis, Bordwände

Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website.

Excerpt from the equipment list. Full equipment details available on request.

Frame
* Standard steel lightweight ladder frame with through-cross beams
* Coupling plate approx. 8 mm thick, with a double-pin kingpin according to DIN 74080 / ISO 337

Chassis
* Axle lift mechanism on axle
* Fully automatic, load-dependent axle lift control
* Starting aid: activation via 3x brake pedal actuation, 30% overload at speeds up to 25 km/h
* BPW three-axle ECO Air suspension unit, with disc brakes Ø approx. 430 mm, offset approx. 120 mm
* Air suspension with approx. 180 mm stroke

Tyres
* Wheels with built-in sensors according to UN ECE R141
* Tyres: six 385/65 R 22.5 UNIROYAL TH 50
* 6 steel rims 22.5 x 11.75, offset approx. 120 mm (ET 120)

Chassis Attachments
* Landing legs (manufacturer of your choice, as per Kögel), mechanical with compensating foot, lifting capacity approx. 24 t, single-sided operation on right side in direction of travel
* Spray suppression system in accordance with Regulation (EU) No. 109/2011 for three-axle assemblies with 385/65 R22.5 tyres, consisting of: 1 pair quarter-round mudguards in front of axles, 1 pair straight mudguards with spray flaps between 1st and 2nd axle, and 1 pair quarter-round mudguards with spray flaps behind the axles
* Side guard according to ECE-R73
* 2 waterproof plastic toolboxes, internal dimensions approx. 545 x 400 x 400 mm
* Rear access ladder, right side, extendable
* High rigid rear underrun protection in steel according to ECE-R58
* 1 pair of extendable warning signs for overwidth loads, retro-reflective red/white, with LED lighting, spiral cable and plug connection. Located at the front and rear of the vehicle

Brake / Air Suspension System
* Wabco EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638 (without interconnecting lines), parking brake as spring-actuated brake, external pneumatic connections and external EBS diagnostic port via ISO 7638 plug connection
* Air suspension system incl. 1 lift/lower valve, mounted on left side behind axle unit. Driving position adjusts automatically
* 2 coded coupling heads at front, ISO 1728
* Air tanks for brake system and air supply made of steel (EN 286-2)

Floor
* Floorboards approx. 30 mm thick, sealed all-round
* Stake pockets for square insert stakes approx. 80 x 80 mm, layout as per drawing J9: 8 stake pocket rails (18 pockets per rail: 4 outside + 10 in the center per rail)

Front wall
* Storage for up to 14 square posts approx. 80 x 80 mm (length approx. 1,990 mm) on inside front wall
* Front wall approx. 2,000 mm high with steel corner posts, with profiled steel sheet, bolted/riveted to frame
* 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on bulkhead according to EN 12640

Side wall
* VarioFix steel lashing outside frame
* 24 pairs of lashing loops in the outer frame (according to EN 12640), permissible pull force approx. 5,000 kg per ring

Gujdpfx Aaew E A Emjcoh
Bumper Protection
* 1 pair of steel bump stops approx. 160 x 85 x 85 mm mounted on external rear frame plate
* Transverse galvanized steel angle as forklift protection, including lock cam protection in the centre, mounted on the rear frame plate

Electrics / Electronics
* Light carrier made of steel, located above the underrun guard
* KÖGEL LUXIMA Premium Package
* 2 multi-chamber...

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.